Production
指南：480 · 分类：10
生产设置和工作流53
- Lock the design to prevent clashes between design and production editsLock the design when a designer and a production person may edit it at the same time, so the designer cannot make changes until the admin or design head unlocks it.
- 共享同一设计或创建生产设计副本决定是共享同一设计以使编辑自动同步，还是创建保持独立的生产设计副本。
- Choose copy or share when sending a design to productionDecide whether to create a production design copy or share the same design when sending a design to production.
- Send a design from the design portal to productionCreate the design and drawings in the design portal, then hand it to the production portal for checking before it reaches the shop floor.
- 了解共享设计如何显示在 Production Designs 中了解通过 Share Same Design 发送的设计如何显示在设计门户的 Production Designs 中，以及它如何保持与其设计的关联。
- 设计如何从设计门户流转到生产 QC 和 MES了解项目如何从设计门户经过生产团队的 QC 检查进入 MES 门户，并在其中获得其输出。
显示全部（53）
- Publish a work order so it appears in the MES portalPublish or republish a design so its work order becomes available to the factory team in the MES portal.
- Create a production design in copy modeCreate a production design in copy mode instead of share mode.
- 在生产设计门户中创建工作范围并访问切割清单为特定区域创建工作范围，以便生成其切割清单并查看原材料物料清单。
- How the production workflow runs from design to work orderFollow how a finalised design moves through production and into the work order, carrying its materials with it.
- How work orders are created and republished from design filesLearn how each design file sent to production becomes its own work order, how updates republish it, and why components stay together.
- Publish a production design as a work orderApply the hardware and connector selections on the production design, then publish it as a work order.
- 目录变更后刷新输出缓存并重新同步更改饰面或芯材设置后，请刷新输出缓存，使更新后的纹理和材料属性传递到切割清单和板材布局。
- Access production design from the main appReach production design from the main app rather than a separate production-design subdomain or portal.
- Batch rooms into one work order with work scopesUse work scopes to combine several rooms into one production run or split them into separate work orders.
- Edit channels in production design without returning to designCorrect a channel directly in the production design module after a design has been sent to production, without going back to the design module.
- Edit connector and construction changes through production designSend the design to production from Outputs, create a new production and open the production design so you can review and modify connector scenarios there.
- 从设计生成切割清单和生产输出在一个流程中从设计直接进入生产，从模型生成切割清单、五金清单和安装指南，而无需单独的 2D CAD 图纸。
- Publish a checked cut list to a work orderPublish a confirmed cut list so you can download the work order and get the final cutting list and machine outputs.
- Publish a job to the MES portalPublish the job to the MES portal from the production design portal so it reaches production.
- Republish a design so the work order cut list is up to dateMake or verify a change in the production design and republish it so the work order cut list picks up the updated values.
- 从源设计重新同步生产设计从源设计重新同步生产设计，以添加、删除和修改单元，并在确认前查看影响。
- Understand what a workscope is in Production > Work ScopesLearn what a workscope covers and how separate workscopes are set up for the outputs you need.
- Update and resync a design to push it to productionUpdate the design and use the resync feature to push it to production.
- Verify materials with QC and create a work orderCheck that core, finished and edge band materials are correctly applied, then create a work order and download its outputs.
- Add machines after publishing and refresh the machine listAdd a beam-saw or CNC machine in Settings > Machines and make it appear on the published work order without republishing.
- Choose which stages a job usesDecide which station types contribute to progress and leave out Packaging and Shipment for smaller jobs.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Download technical documentation summary from production portal after transferGet a technical documentation summary covering part codes, dimensions, materials, finishes and edge band specifications after transferring a project to production.
- Find CAM mode in Infurnia Production, not DesignLearn where CAM mode is available and why cabinets no longer show it while you work in the Design module.
- Find your way around a production design copy's Production tabOpen a production design copy and use the Production tab toolbar and the Differences between work order and design dialog to compare the work order with the design.
- How work order numbers are assignedLearn that the work order number shown in the project is assigned by Infurnia and cannot be edited by the user.
- Limit a scenario change to the current designScope a construction or CAM scenario change to the current design instead of applying it globally.
- Pack panels into boxes and ship themScan panels into a box on the Packaging page, then complete shipment by scanning the box.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Publish a work order to unlock downloadsPublish the work order so its downloads become available and an immutable published design version is created.
- 生成机床输出前，先从管理员处刷新 CAM 设置获取管理员配置的最新 CAM 设置并应用，使机床输出下载时无违规。
- Refresh cutlist settings from Admin and republishPull the latest cutlist settings from the Admin portal and republish the design so updated production files can be downloaded.
- 从管理端刷新设置并在下载输出前应用刷新最新的管理端设置，应用这些设置，然后下载输出文件，以确认输出没有重大问题。
- Resize a unit without breaking MES calculationsChange a unit's dimensions in the design and its production calculations follow the updated size, because it stays the same unit.
- 在发布到 MES 之前审核设计生产经理会审核设计，并可在发布到 MES 之前更改预铣等数值。
- Review designs in the production design portal before a work orderBefore a work order is created, use the production design portal to review the design construction-wise.
- Review what changed and when in production design versionsOpen the Versions & History dialog in the production design to see each change with its action, timeline and user, so you can review what was changed on a given day.
- Send a design to production from the homepageOpen the three-dashes menu on the homepage and choose Send to Production to send your design to production.
- Send designs for production via email from the portalSend a design directly by email from the portal so it reaches production.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- 分享生产设计链接请使用普通分享链接作为生产设计的设计链接。
- 从 Archived 列表取消归档生产设计从 Production Designs > Archived 列表将已归档的生产设计恢复为 In Progress。
- 了解生产设计师角色了解生产设计师如何连接设计师与工厂团队，并在生产前验证设计。
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- Use consistent project naming so production can identify the jobTrack each job through production by relying on the project name, designer and status.
- Use Outputs > Production Settings in the design editorOpen Outputs > Production Settings to refresh the cache, check for overlapping modular units and reassign unit, panel and cabinet finish annotations.
- 验证切割清单并将项目发送至 MES设计定稿后，请验证切割清单，并将项目发送至 MES 门户以进行工厂生产。
工单与发布31
- Download board layouts, labels and pasting reportsDownload the board summary and layout files for every board type, and get panel labels, sheet labels and pasting reports as separate downloads.
- 从生产输出中排除面板在发送到生产前，通过选择子集或隐藏面板，将面板从切割清单和排程中排除。
- How saw file formats are chosen for the production machineLearn how the production machine's output type decides the saw file format and what the beam saw operator should check.
- Verify edge bands and cutlist before productionCheck edge bands, back panels and cutlist output in QC Mode before releasing the design.
- Download files from a published work orderOpen the published version of a work order to download raw-material CSVs and machine saw files.
- 从违规列表中解决碰撞打开违规列表并使用其中的解决碰撞操作来清除碰撞，此时模型上的碰撞标记与列表条目相对应。
显示全部（31）
- 通过调整隔板宽度或解决碰撞来处理钻孔碰撞在单件 CAM 模式下检查钻孔和钻孔碰撞面板违规，然后对较大的问题使用 solve collisions。
- 检查元素为何被排除在所有输出之外逐一排查各项排除原因，找出元素为何在所有输出中都缺失。
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- Download a machine cutlist and handle unsupported formatsOpen the Cutlist tab, pick a panel-saw machine and fall back to CSV when the machine's format is not supported.
- Find and open board layout violationsSpot board types with violations and open the read-only violations view to see the offending panels.
- 修复标记面板、五金件和搁板碰撞的违规项了解设计中哪些情况会引发违规，以及如何自动或手动清除违规。
- Generate a board layout and choose Accept, Abort or Re-generateOpen the Board Layout tab to start generation, then decide whether to accept the best layout so far, abort the run, or force a fresh regeneration.
- How output quantity above 1 duplicates panels with _1/_2 labelsSet a cabinet's output quantity above one and see how its panels are laid out and labelled as copies while sharing a single CNC file per panel.
- 从违规列表中读取设计违规打开违规列表，在生成生产输出之前查看待处理的违规。
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- Verify cut list and clear violations before sending to factoryQuality-check the board layout and review the cut list of panel sizes before a design goes to the factory.
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- 检查发布违规项，找出尺寸为零或无效的面板在下载生产文件之前，先发布设计并查看违规项列表，以便找出尺寸为零或无效的面板。
- 在已发布的工作订单中选择面板和板材标签模板发布工作订单以使贴纸和标签设置可用，然后为其板材布局选择默认面板标签模板和默认板材标签模板。
- 在 Edit Work Scope > Show Units 中批量停用单位使用 Bulk Disable 停用某个单位，可看到它移至 Removed Units，且其卡片上显示被覆盖的状态。
- 当设计存在待处理违规时下载切割清单 PDF即使设计仍有待处理违规，也可在确认这些违规涉及的范围和检查项后下载 Cut List PDF。
- 下载存在待处理违规的工作订单当工作订单仍有待处理违规时，MES 门户会在下载前警告输出可能不正确，并让您选择如何处理。
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Exempt violations to hide production errors from designersHide production issues and errors from designers by exempting violations in the admin settings.
- 重新同步更改房间范围后恢复单元当与源设计重新同步似乎移除了单元时，请检查确认信息中显示的房间范围，并从'Units removed from manufacturing'恢复单元。
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- 重新同步 PD 分支并保留两个分支的更改重新同步 PD 分支，使其在更新的同时保留两个分支中所做的修改，但请注意，发生冲突的 PD 分支更改会被丢弃。
- Review and accept admin setting differences on a work orderSee which work order settings differ from the admin values and accept them to continue to the Violations check or a CNC machine-files download.
- 解决生产设计中的碰撞在 Violations 中运行 Solve collisions，按 CAM Settings 中设定的量移动连接件，并逐一查看每项更改。
切割清单列和设置65
- 自定义切割清单列并包含封边条厚度设置所需的切割清单列，并决定封边条厚度是否计入计算。
- 在生产开料清单中同时显示开料尺寸和成品尺寸开启可选的开料列，使开料清单在成品板件尺寸旁显示封边前的开料尺寸。
- 封边条厚度如何影响成品门板尺寸了解封边如何按板件分别应用，以及其厚度在板件的封边设置中显示的位置。
- 显示预铣和封边条的 Cut L 和 Cut W添加 Cut L 和 Cut W 列，使开料清单在成品尺寸旁显示开料尺寸。
- 在切割清单中启用切割尺寸和封边列以核对板材在切割清单中开启切割尺寸和封边列，以便检查板材尺寸是否与封边和预铣设置一致。
- Get CAM details, cut list and raw material BOQ from a production designProduce CAM details, the cut list and the raw material BOQ together from a production design, scoped and downloaded as you need.
显示全部（65）
- How panel sizes include edge band and laminate in the cut listLearn how the Finished Size and Cut Size columns in the production cut list differ, and which size CAM output uses.
- 通过隐藏门板获取仅含柜体的切割清单在生成切割清单前隐藏门板，以便仅输出柜体和可见侧板。
- Fix panel size discrepancies caused by edge band thicknessMake sure the edge band's actual thickness value is correct, because the software calculates panel size from it rather than from its name.
- Get edge banding quantity from the softwareAdd the exact edge band you use to the setup so the software can give you its quantity.
- Show edge band, panel name and size columnsTurn on the edge band column and read panel name, finished size and cut size in the cutlist.
- 为板材添加自定义标签，并在切割清单中显示这些标签为板材（包括自定义板材）添加自定义标签，并通过启用自定义标签列，使其显示在切割清单和贴纸上。
- 通过标签属性为重叠项目添加自定义标签当布局上的标签重叠时，通过标签属性添加自定义标签，并将其放置在所需位置。
- Choose what prints as the panel name on labelsSet the panel-name element on a label template so the printed label, preview and machine files show the design name, the custom label or a combined name.
- How edgeband lengths in the BOQ are calculatedSee how extensions, edge profiles, pre-milling, cut shapes and wastage adjust each band's BOQ length so you can reconcile the totals.
- How mapped edge band thickness drives cut list dimensionsLearn how the edge band thickness mapped to a material directly affects the cut list dimensions.
- 了解切割清单中的板材如何排序和分组了解生产切割清单如何按柜体逐个列出板材并按升序排列，以及如何查看每块板材所属的房间。
- Choose the cutlist type and export the cut list CSVSwitch the cutlist type on the Cutlist tab and export a CSV that follows the selected type for beam saw machines.
- 在生产设置中配置切割清单列和尺寸精度开启所需的切割清单字段，并设置尺寸精度，使生产输出按您期望的方式对尺寸进行舍入。
- 从生产视图下载切割清单从生产视图将板材清单下载为 Excel 或 PDF 文件，并查看其各列。
- Read panel dimensions in the cut size columnFind each panel's dimensions in the cut size column of the cut list.
- Understand cut edgeband on panels with cut or slanted edgesLearn when a panel carries a cut edgeband and why rectangular panels correctly show 'No Edgeband'.
- Generate and download a cut list with cut length and edge bandsGenerate a cut list from the production module and download it, enabling parameters such as cut length and edge bands before generating.
- How cutting size is calculatedLearn how cutting size subtracts edge banding and pre-milling from the panel dimension.
- How shelf depth is calculated in cut listsLearn how an adjustable shelf's depth is derived from the carcass depth, the shelf reveal and the back panel offset.
- Set board sizes, offcuts and saw width in Board Layout SettingsGive each board type its sheet sizes and stock offcuts, set the cutting type and saw width, and override the size for a single board when needed.
- Set pre-milling type and read edgeband columns in the MES cutlistChoose how pre-milling is applied and read each edge's band and cut length in the MES cutlist.
- Understand shutter sizing in a child partitionLearn why a shutter added to a child partition takes its size from that partition rather than the overall unit height.
- Understand skirting notches on wardrobe carcass side panelsLearn which units get skirting cuts on carcass side panels, how each wardrobe type maps its cuts, and what to check when a notch is missing.
- Add Combined Label and room name columnsTurn on the Combined Label and room name columns and move room name to the top of the cutlist.
- Change the cabinet code shown in cutlist outputsEdit the cabinet code field's display name in the Homag or Biesse tab of Cutlist Preferences so your cutlist outputs show the column name you want.
- Check which downloads need a published work orderSee which footer downloads stay disabled on an unpublished work order and which ones remain available.
- How cut dimensions relate to finish dimensionsLearn when a panel's cut length and width match its finish dimensions and when edgebanding makes them differ.
- How cutlist and board layout accuracy settings control decimal placesLearn how the accuracy control in cutlist settings and board layout settings decides how many decimal places sizes are shown with.
- How cut list panel names use unit and panel codesLearn how each cut list panel is identified by a unit code plus a panel number and how that identifier links back to the 3D model.
- How the Room Name field in cutlist labels is filledLearn where the Room Name field in the cutlist/label export gets its value and what it shows when a project has no room defined.
- Identify rooms in the cut list without renaming cabinetsShow the room name as a separate column in the cut list so you can tell which room each cabinet belongs to without changing the cabinet name.
- 使用工作范围将切割清单限制为一个房间为单个房间创建工作范围，使切割清单仅反映该房间的柜体。
- Open Cutlist Settings and apply column changesOpen Cutlist Settings from the cutlist header and apply visibility, naming and order changes per cutlist type.
- Review cut list by cabinet then panel detailsOpen a cabinet's cut list, check each panel's details and mark panels verified, and view the unit visually to confirm rails, shelves and back panel position.
- Set pre-milling type by edge-band thickness or for all panelsChoose whether pre-milling follows each panel's edge-band thickness or applies the same setting to all panels, then save and recalculate to verify the cutting length.
- Set the grain convention and show grain in panel infoChoose how grain is labelled and see the Grain row in the board layout's panel info.
- Understand fixed shelf depth and partition dimensionsLearn that the partition refers to the space within the carcass, not the outer panel, when reading fixed shelf depths.
- Add extra custom columns to a cutlist exportLearn how many extra custom columns you can add beyond the standard fields when exporting a cutlist for a third-party saw or ERP system.
- Change a panel's core in QC mode > Panels > Modify PanelsSet a panel's Core Material Source and, when you need a different core for that panel alone, switch the Source to Custom and change it.
- Change the cabinet code label in cutlist preferencesChoose the Cabinet Code field for cutlist output and set its display name on the Homag, Biesse or Basic tab.
- Choose between a full top panel and half railsLearn how a full top panel uses more material and gives different panel sizes than half rails.
- Control cut list columns and their exported orderFilter rows with the search box and set column visibility, names and order so the export matches the screen.
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- Enable material code column to group cutlist by core materialUse the material code column, which carries core material information, to group the cutlist by core material.
- How back panel material assignment affects finish sheet countLearn why a finish can show more sheets than expected when a back panel uses a different material from the carcass.
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- How construction edges change carcass panel sizes in the cutlistLearn how the inset or outset choice at each shared carcass edge changes panel sizes in the cutlist.
- Read part codes and part names in the cut listLearn how the part code and part name in the cut list tell you which cabinet and which panel a row belongs to.
- Remove cut length and cut width columns when pre-milling is usedHide the cut length and cut width columns from the cut list display when pre-milling makes them unnecessary.
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- Set dimension accuracy and header options per cutlist typeSet dimension accuracy to 1 mm and switch on project and store header rows for the cutlist type you are working with.
- Set elevation preferences in the admin portalControl which panels appear as additional manufacturing details in elevations by setting the elevation preferences in the admin portal.
- 设置带 CSV 输出和所选列的裁板锯机器配置裁板锯机器，以输出包含所需列的 CSV 切割清单，从 part code 开始。
- Show client name and work order code columns in the cutlistSwitch on the client name and work order code columns in the cutlist field settings so they appear alongside the room name.
- Show material code alone by turning off finish columnsCombine the core material code with the external and internal finish codes into one material code and hide the separate finish columns for a more compact cutlist.
- 了解 Basic 切割清单并查找某个单元的板材了解 Basic 切割清单显示的内容、Operations 和 Quantity 列何时出现，以及如何在其中搜索某个单元的板材。
- Understand why PVC skirting is not on the cut listLearn that PVC skirting is bought readymade, so it is never cut from wood and never appears in the cut list.
- Use pre-milling to compensate for edge-band thicknessApply a per-side pre-milling allowance instead of cutting panels oversize, and decide whether your factory needs pre-milling at all.
- 何时需要在切割清单中使用预铣列了解何时需要切割清单中的预铣列，以及何时它仅对每条边预铣设置不同的板材有用。
切割清单输出和机器格式52
- Infurnia CSV 切割清单如何用于 NC 和梁锯机器了解 Infurnia 为 NC 或梁锯机器提供的 CSV 文件包含哪些内容，以及哪些内容交由机器处理。
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- 从工单下载切割清单和原材料输出发布工单，然后从生产门户下载切割清单、原材料清单和板材排版图。
- Match each machine Output selection to its file formatSee which file extension each machine Output selection produces, from .mpr and .cix to .nc, .xml and .dxf.
- 下载切割清单和板材排版图，然后按芯材排序从已发布版本下载切割清单和板材排版文档，然后在 CSV 中按芯材排序，以获得特定板材类型的切割清单。
- 输出切割排版、切割清单和 CNC 文件获取适用于您的锯和机器的板材排版、切割清单和 CNC 文件。
显示全部（52）
- 输出材料、五金和 BOQ 清单生成用于采购和核对的材料、五金、板材类型和 BOQ 清单。
- Add a machine in MES machine settingsAdd a machine by choosing its type, category and output format, then enter its name and settings.
- 选择开料清单列并导出板件明细表 CSV选择要显示的 62 个开料清单列中的哪些列，然后导出板件明细表为 CSV，其中包含信息行和封边条长度。
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- How drill information and the cut list come from hardwareLearn how the hardware you define in the design produces drill information and the cut list.
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Download a raw material summary for a completed projectDownload a raw material summary of core, finish and edge band material once the project is complete.
- Explore the Board Layout footer, optimization settings and outputs in MESLearn what the all-board-types footer, Optimization Settings, Exploded View output and Cutlist type dropdown offer in an MES work order.
- Get a screw-level hardware list from production outputSee how production output gives you a basic hardware list, and how configuring hardware setup lets it detail individual items such as which screw is used and how many are required.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- 在面板图纸 PDF 上读取钻孔位置、图例和线型了解手动面板图纸 PDF 如何标记每个钻孔的位置、尺寸和类型，以便您能在车间现场读取。
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- 选择机器输出前，请先确认可接受的文件格式在选择输出格式之前，请确认您的机器接受哪些文件格式，然后尝试平台提供的兼容输出。
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure cutlist export options and pre-millingSet dimension accuracy, quotes, header rows and pre-milling values so exported cutlist values come out correct.
- Confirm the format a machine accepts before exportingCheck the machine's supported format before exporting cut list and production data, and plan a CSV workflow when DXF carries geometry only.
- Download a machine-specific cutlist from Custom CutlistPick a panel-saw machine from the Custom Cutlist menu to download the cutlist formatted for that machine.
- Download a PDF of the production layoutDownload a PDF of the production layout from the toolbar in the production layout view.
- Download CNC file as a zip and upload it to the machineDownload the CNC file, extract the zip and upload the extracted file to the CNC machine.
- Download countertop information as an Excel fileDownload the countertop information as an Excel file so you can review it or use it further.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Download machine files for a CNC machineDownload the machine files for a CNC machine from its Machine Files download option, and use the menu beside it for DXF output.
- Download optimization XML and label outputsRun optimization to generate an XML file and label outputs, then confirm and download them from the optimization results for downstream machine and production consumption.
- Download project outputs as PDF or XLSGenerate project outputs and download them in either PDF or XLS format, with a single module's output showing panels, hardware, sizes, material and finish.
- Download raw material and hardware requirement sheets separatelyDownload separate requirement sheets for wooden raw materials and hardware raw materials from the production tab.
- Download raw material list as PDF or CSVGet the plan and quantity for each item, then download the raw material list from the MES work order as a PDF or CSV files to hand to the factory team.
- Download saw files, board layouts and panel labelsGet the saw XML, board layout PDFs and panel labels from the published work order.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download saw files, nesting files and panel labelsUse the footer menus to download machine-formatted files and numbered labels for the current scope.
- Download the board layout PDF and cut panels on a tabletDownload the board layout PDF from a published work order to hand to the factory as the cutting instruction, then cut and label each panel on a tablet.
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- 机器设置配置的工作方式了解如何一次性配置机器设置，并在所有后续作业中重复使用。
- How the Profile Cutting List and Profile 1D Layout are generatedLearn how the Profile Cutting List is generated from the sizes entered for glass shutters with profiles all around, and how the Profile 1D Layout shows each profile piece cut from the stock length and what remains.
- 使切割清单导出格式与您的锯机匹配请选择已知可与您的锯机品牌配合使用的切割清单文件格式，以确保导入的面板保持正确尺寸。
- Open the raw materials output and download lists as CSV or PDFOpen the raw materials output from the outputs tab and download the material and hardware lists you need.
- Pull latest Tool and CNC settings from AdminRefresh Tool and CNC settings from the Admin portal into the current work order via Settings.
- 在诊断不匹配问题之前，先从工单重新下载最新的 SAW 文件从工单重新下载 SAW 文件，使机器读取当前的设计尺寸，而不是较早的导出文件。
- 查看每个房间的原材料数量为每个房间分别创建一个工作范围，并在 Raw Materials 部分中切换它们。
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- Understand hardware quantities rounded up to whole setsLearn why per-set hardware quantities in the Raw Material list are rounded up and how to check a quantity that looks too high.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.
- Use KD XML format for cutting filesChoose KD XML as the output format when you generate cutting files for cutting operations.
- 应为每个生产团队提供哪个输出文件为每个生产团队提供其所需的输出文件：用于切割的 XML 锯切文件、用于采购的面板材料和五金 PDF，以及用于组装的复合柜 BQ。
板材排版和排样69
- 分享开料排版和原材料报告分享厨房设计的开料排版和原材料报告，以便清点每张板材上的门板和板件，确认没有遗漏。
- 平台如何为板材切割生成生产板件排版图了解平台如何生成生产板件排版图，供您的车间团队按图进行板材切割。
- Enable stacking per work order and set maximum stack heightTurn on stacking for a work order and set how high boards may stack in its board layouts.
- How the Half / Fractional Sheet Split Gap worksLearn what the Half / Fractional Sheet Split Gap measures, its default value, and which utilization modes enable it.
- How board layout counts boards by material and panel typeLearn how board layout counts boards from the materials and panels defined in the catalogue and lists the requirement for each panel type.
- How grain direction affects board layout optimizationDefine grain direction for each finish so panels are placed according to their grain when the board layout is optimized.
显示全部（69）
- How grain direction affects sheet count in nestingLearn why a grain or directional finish forces panels to nest in a fixed orientation and how that can raise the number of sheets you need.
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Read the legends and review panel details before productionUse the legends and PDFs to check grain direction, grooving, edge bands and material details before cutting.
- Rotate a panel to fit while respecting grain directionFit a panel that does not match the board layout by rotating it, and override its grain direction when vertical grain would block the rotation.
- Set dimension accuracy and compare fractional-sheet wasteChoose the dimension accuracy for the layout output and use the waste percentage to compare layouts.
- Change board size or blade settings to recalculate board requirementChange the board size or blade settings and the board requirement is recalculated.
- Configure small-part rules and the split marginDecide when a part counts as small, how far it stays from sheet edges, and how wide the split margin is.
- Control sheet ordering, fractional sheets and where settings are editedSet sheet ordering, the minimum free length for fractional sheets, and adjust these options from inside a project.
- Download and share the board layout and board summary PDFsTake the board layout and board summary PDFs from the footer and forward the layout to the factory or a manufacturer.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- Edit a work order board layout after generationChange a work order's board layout by hand after it has been generated instead of keeping it locked to the production design it came from.
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- Fix an oversized panel by splitting itSplit an oversized panel in the design portal so it fits the board and is included in the layout.
- Fix grain-direction rotation refusalsCorrect a wrong-running grain at the panel's grain declaration instead of rotating it on the sheet.
- How board layout groups panels into board typesLearn how a design's board layout groups panels into board types and proposes a least-waste layout.
- How fractional sheet settings split a sheetLearn how fractional sheet settings divide a sheet by a set fraction, such as a 250 mm fraction or a 50/50 split of the length.
- How grain flags on finishes control panel rotation in board layoutLearn how a panel's grain requirement comes from the grain flag on its finish and why a grained panel is not allowed to rotate in board layout.
- How stacking height limits stack count in board layoutLearn how the maximum stacking height setting in board layout / MES output determines how many boards fit in one stack.
- How the board-layout margin worksLearn what the board-layout margin defaults to, when it is applied and where you can change it.
- Inspect, move and discard panels in a design's Board LayoutClick a panel to see its Panel info, drag it to move it on the sheet, and use Discard Changes to put the layout back.
- Mark all panels of a cut sheet as tracked in bulk from board layoutMark every panel on a cut sheet as tracked in one action when the operator has not scanned each panel individually.
- Optimize board layouts for units automaticallyLet the software calculate board layouts and wastage for units such as vanities and wardrobes, with the option to adjust manually.
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- Read panel codes and labels on a board layoutEach panel on a board layout carries a panel code and a label, so the operator can paste the correct label on the correct panel after cutting.
- Regenerate board layout after turning off panelsTurn off all panels except the top and shutter panels, then regenerate the board layout so the shutter panels get their own separate layout.
- Set the cutting type and optimisation criteria for board layoutsChoose straight cuts or nesting, then tune recuts, optimisation criteria and stacking for the layout.
- Troubleshoot a stopped cutting job and read sticker codesCheck margins and saw width when a cutting job stops, and see how the sticker material code is built.
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- 了解切割计算中的板材尺寸和锯片厚度了解板材尺寸默认如何在两侧计入 10 mm 修边量，以及锯片厚度如何单独输入用于切割计算。
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- 选择切割清单优化目标选择最少材料、最少加工时间或均衡，然后应用以生成优化布局。
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- Choose the optimisation criterion per sheet typePick a criterion for each sheet type, or apply one to all with the Overall row, then continue without recomputing.
- Choose the room and download scope for board layout filesOpen the board layout for one room and set the screen level that decides which panels a download covers.
- Clear an oversized panel violationClear an oversized panel violation either by splitting the panel to the available height or by entering the correct board dimensions in the board layout settings.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Enable minimum distance from edge for laminate border allowanceTurn on the minimum distance from edge setting so laminate border allowance is applied around the panel and set the maximum length of the smaller side in the same settings.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix grain-alignment violation by rotating finish 90 degrees at panel levelRotate the finish 90 degrees at panel level so the panel aligns itself to the vertical grain and the violation clears.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- 如何将锯片厚度与修边余量分开计算了解锯片（锯缝）厚度如何作为单独余量应用于各次切割之间，以及剩余尺寸如何处理。
- Inspect a composite sheet and keep the board remainderOpen a composite sheet to see its core material and combined pieces, and keep the unused board remainder for other projects.
- Read the Optimization Statistics modal after a comparison runRun the layout with Decide after Comparison and read each sheet type's sheet count, processing time and offcut figures.
- 将存在布局错误的板材的重新切割上限降低到 1 或 2仅针对存在布局错误的板材降低重新切割上限，以修复面板重叠或超出板面的板材。
- 通过将余料添加为板材来重复利用余料将剩余的余料板添加为板材或编码，以便在后续项目中重复使用。
- Set board sizes, quantities and force useGive each board size its available sheet count and mark the sizes the optimizer must consume.
- 将尺寸精度设为 1 mm，以对切割清单尺寸进行舍入将尺寸精度设为 1 mm，系统会将计算出的尺寸舍入为整毫米，与预期的板材尺寸一致。
- Set margins, blade thickness and saw widthSet the board margins and saw blade allowance so cutting jobs run with the right values.
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
- 在Edit Layout中放置已拾取的面板时切换图纸打开面包屑导航的图纸菜单，可在板类型的各图纸之间切换，并将已拾取的面板放置到所选图纸上。
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand optimization after a material changeLearn what happens to optimization when core or finish materials are changed in a design.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Understand why cut-list labels and board layouts show different sizesLearn why a cut-list label shows a size with decimals while the board layout shows rounded whole numbers.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- View a board's layout with labelsClick an individual board to see its layout with labels.
板材标签和贴纸35
- How panel labels and QR codes work in productionLearn what panel labels carry and how their QR codes drive CNC file lookup and order tracking.
- 输出标签、粘贴报告和装配视图用于车间的打印板材标签和面板标签、粘贴报告和分解装配视图。
- Select the correct machine type when downloading panel labelsChoose the machine type that matches your CNC machine when downloading panel labels so the QR code starts the correct operations.
- Track work order progress by scanning panel label QR codesScan the QR code on a panel label to track a work order's progress through factory stations and mark completion at each scanned stage.
- Add separate QR codes for top and bottom programs on HOMAG CNC labelsGive a HOMAG CNC panel label separate QR codes for the top machining program and the bottom machining program.
- 面板标签上的条码为可选项，用于追踪面板标签上的条码不是必需的，用于追踪。因此，在不需要追踪时，您可以移除条码区域并缩小标签尺寸。
显示全部（35）
- How panel label defaults are setLearn the default panel label size and border the platform uses.
- Make panel labels visible in the design portalPublish the design so its panel labels for the cut list become visible, without opening the cut list.
- Read panel codes to identify carcass and unitPanel identifiers in production output make it easy to see which carcass a panel belongs to and which unit has to be cut, so a specific unit can be picked out quickly during cutting.
- 为某台机器开启面板标签旋转启用该机器的单独设置，使该机器的输出带有旋转后的面板标签。
- Add edge band code, final size and material info to production labelsExtend production labels to show the edge band code, final panel size and internal and external material information.
- Choose which box label template a work order printsSet the default box label template for one work order so its labels print in the layout that client or project needs.
- Create a custom label template based on printer and sticker sizeCreate a custom label template, set your sticker size, choose the information fields to print, then update it and set it as default.
- Create, rename, update and default panel and box label templatesManage the org's panel and box label templates, from creating and customising them to setting the org-wide default.
- 将面板标签下载为生产输出面板标签作为可下载的生产输出之一生成。
- Enable loading order and premilling-by-side in sticker templateTurn on loading order and premilling by side in the sticker template so the sticker shows which side faces up and the premilling value per edge.
- Filter and report progress per operationCombine station and tracking-status filters and enable show detailed progress to see per-operation completion.
- 修复箱标签上缺失的组织徽标通过重新生成标签或检查徽标配置和模板图层，让组织徽标显示在箱标签预览和打印的 PDF 上。
- 修复组织徽标与重复二维码冲突的面板标签了解为什么组织徽标和重复面板二维码无法同时打印在面板标签上，以及标签布局和导出会有怎样的表现。
- 修复删除箱体后箱号跳号的问题删除一个箱体，将其板材退回未装箱池，然后重新分配标注，使剩余箱体按顺序重新命名。
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Fix user component annotation labels that cannot be changedUser component annotations are auto-labelled, so their labels cannot be edited.
- 自动生成并打印板材标签设置标签布局，选择要包含的板材数据，然后从板件布局功能中下载并打印标签。
- How panel stickers carry a CNC barcode alongside the scan QR codeLearn how the panel sticker can carry a barcode for the CNC machine in addition to the QR code used for scan tracking, and how a setting switches the machine-file field between a barcode and a QR code.
- 图纸标签的工作方式了解每张图纸如何在整体图纸顺序中获得自己的标签。
- 发布到设计门户后使面板标签可见在设计门户中发布您的设计，面板标签即可见。
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Read edge band thickness on the panel labelThe panel label prints the edge band thickness as a number on the side of the diagram where that banding applies, so shop-floor staff see it at a glance.
- Read the external and internal finish on a panel labelOpen the panel label to see which side of a panel carries the external finish and which carries the internal finish.
- Save label printing format files to drive for automatic retrievalLabel creation requires cut sizes, finish sizes, operations, edge banding thickness, and panel indicators.
- Scan panel labels to detect the correct CNC filePanel labels include a barcode that a CNC machine scans to detect the correct file for that panel.
- Show edgeband face grooving on panel labelsShow grooving information on panel labels in addition to the board layout view.
- 在箱标签上显示组织徽标并选择其位置在箱标签模板上开启组织徽标并选择其位置，了解使用哪个徽标以及它在各页面上的表现。
- Understand offcut management in productionLearn that offcut management is not currently available in production and that labels are generated only for panels accounted for in a project.
- Update the sticker template after changing sticker settingsLearn how the sticker template controls which information appears on the sticker and can be switched on or off per field.
CNC 和 CAM 操作65
- 为 CNC 添加板件开孔并指定加工类型和刀具在板件的外表面上创建凹槽，设置其切割深度和加工类型，并使其可用于 CNC 输出。
- 了解背板槽在 CAM 输出中出现的时机了解内嵌背板如何在周围板材上生成开槽工序，以及哪些偏好设置和机器设置决定这些槽是否以及如何进入 CAM/MES 输出。
- 通过在 CAM 中标记包含、类型、深度和刀具来添加 CAM 操作在 CAM 中标记包含，将设计特征发送到机器，然后设置其切割类型、深度和首选刀具。
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- Cut a curved or arched panel from a final-size panelStart with a panel already at its final dimensions and cut the curve out of it to produce a curved or arched panel.
- 为 CIX 输出启用 Biesse Works 兼容性在机器设置中开启 Biesse Works 兼容性，以便您的 Biesse CNC 机器正确读取生成的 CIX 输出。
显示全部（65）
- Trimming vs pocketing in CAM operationsLearn how trimming removes material across an entire area while pocketing carves a defined space inside a perimeter.
- 下载输出前，先配置 CNC 机床类型和刀具数据按钻孔面设置机床类型，添加铣削刀具和锯切刀具，然后保存并下载 CNC 输出。
- Force a tool and finish adding a CNC machineMap drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- Set routing line tool position L, R or C for cut alignmentClick a routing line to see the tool position with L, R and C options, specify a preferred tool, and check the panel preview by selecting the machine instead of raw view.
- Create custom cuts in edit panel design and include them in CAMDraw and offset a custom shape on a panel, define it as a cut with a depth, and enable the include in CAM option so the machining reaches the CNC files.
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Enable Include in CAM to push panel operations to productionTurn on Include in CAM when adding a panel operation so it reaches production, then choose the operation type, tool and tool number.
- Enter saw tool name, thickness and axis for back-panel groovingAdd a saw tool row in the CNC machine settings so back-panel grooving operations carry the right tool name, thickness and axis.
- 首选刀具选择如何映射到机器钻头了解在 2D CAM 模式下为切割选择的首选刀具如何决定由哪个机器钻头执行该切割。
- Set back panel grooving methodChoose whether back panel grooves are cut by sawing or routing.
- Set the preferred router tool for back panel groovesSet the default router tool for the Back Panel Groove operation in a CNC machine's settings, choosing from tools identified by name, diameter and axis.
- 在设置中添加 CNC 机器以下载钻孔文件在 Settings > Machine 中添加 CNC 机器，以便下载钻孔文件和 DXF。
- Add CNC tools that match the machineEnter every tool the job uses with names and numbers that match the machine so CNC output can be matched and downloaded.
- Check a tool's type in machine settingsLook up the type assigned to each tool in machine settings to see why a routing tool cannot be listed as a sawing tool.
- Configure CNC machine as 5-face process with panel flipEnter only the saw tool details, including the tool name and thickness, in the machine settings.
- 按钻孔面数配置 CNC 机床类型在 CNC 机床设置中设置机床类型，使其与机床钻孔的面数一致。
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- Create parametric pockets and dog-bone cutouts on panelsMachine pockets into panel faces, size them parametrically, and use routing for dog-bone and horizontal cutouts.
- CAM 设置中的槽深公差如何控制切割清单中的槽精度了解面板的 2D/CAM 视图中显示的槽深如何包含系统添加的公差，以及在哪里配置它。
- Include side panel cuts in CAM outputInclude the panel cuts on the sides of a cabinet in the CAM output.
- Machine radius panels and grooving by editing panel constructionEdit the panel design at the construction level and apply the required tools and operations so the application generates the machine instructions automatically.
- Output top and bottom drilling in one CNC fileTurn off the Separate Top Bottom Files setting on a CNC machine so it outputs a single file containing both top and bottom drilling.
- Restrict a panel area from grooving or drilling via clamping obstructionDefine a restricted rectangular area on a panel in the Clamping Obstructions table so the software rotates the panel when a groove or drilling operation falls inside it.
- Set up a CNC machine with its machine type and settingsUse the Add Machine option and fill in the machine type and the settings the setup stores per machine.
- 为什么面板在 CNC 输出中会被旋转（或不被旋转）了解 Always Rotate 设置、Maximum Machine Depth 和 Min Panel Width 如何决定面板在 CNC 输出中是否被旋转，以及当钻孔出现镜像或落在错误边缘时应检查什么。
- 在 2D Panel CAM Mode 中添加和编辑钻头在 2D Panel CAM Mode 中向面板添加钻头，并编辑其位置、步数和机器深度设置。
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- 在机器侧锯刀具列表中添加锯片刀具行添加一行锯片刀具，填写其名称和锯片厚度，以便在机器上运行锯切操作。
- Back panel grooves cut end-to-end in generated MPR filesLearn how back-panel grooves defined end-to-end in the design carry through to the generated MPR file and match the drawings on the MES portal.
- Check CAM hole depth in panel 2D CAM modeOpen the panel in 2D view and enter CAM mode to verify hole markings such as drawer channel or tandem depths.
- 下载图纸时检查夹持区域警告为工单下载图纸或机器文件，查看哪些工序位于受限夹持区域内。
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose a panel cutting strategy for CNC productionUse the panel-by-panel strategy for CNC cutting and avoid the single-step strategy when two panels are involved.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- Download and check CNC machine files before productionDownload the CNC output from the published work order, load it into the machine and verify it against the machine type.
- Download CNC machine output drawingsDownload drawings from the CNC machine output that show every panel with its machining details, using reference letters A, B, C and D to determine positions and depth.
- Draw the path before exiting to 3D view for the sweep toolDraw the sweep path before you exit to the 3D view, because the sweep cannot be applied without a defined path.
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Find the download buttons on a work order's CNC Machining tabLocate the Drawing and Machine Files buttons on each machine card and know which formats each machine offers.
- 通过调整 CAM 槽长公差修复槽切割不正确的问题在管理员 CAM 设置中将槽长公差设为钻头直径的一半，使生产文件中的槽正确输出。
- Fix missing routing or drill tools in CAM outputAdd the referenced tools and refresh the cache so regenerated CAM output includes every tool the job uses.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- 生成 CNC 输出时出现“刀具把手可能不同”警告了解生成 CNC 输出时为何会出现 "tool may be different" 警告，以及如果选错了刀具，如何更正刀具映射偏好。
- Infurnia 的 .nc G 代码有哪些限制：R 圆弧、无刀具补偿、毫米绝对坐标了解 Infurnia 小型 G 代码方言的固定规则，从而明确其 .nc 输出在您的控制器上能表达什么、不能表达什么。
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- 如何设置和检查灯带凹槽深度了解灯带 SKU 的凹槽深度如何决定面板是否开槽、开槽深度，以及如何在 CAM 输出中验证结果。
- Biesse CIX 文件中 ORLST 原点的选择方式了解 Infurnia 如何为每块板材选择 ORLST 床原点：来自 Default Machine Origin 或基于范围的原点表。
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- 使锯切宽度与机器锯片宽度一致将工单上的锯切宽度设置为切割机的实际锯片宽度，并重新生成锯切文件，以确保板材排版正确。
- 按单元邻近性命名 CNC 文件（C1、C2、C3）在条码中命名 CNC 文件时，请使用 C1、C2 和 C3 等单元邻近性标签，以便同一命名概念在各项目中保持一致。
- 为超大 Biesse 板材按原点覆盖最大机器深度为特定原点行设置更深的独立最大机器深度，使超大板材仅在该原点被接受。
- Set onion-skin passes and through-cut ordering in nesting NC programsControl whether through-cuts are machined in one pass or two, and know that they always run last in the program.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- 当机器拒绝默认格式时，尝试其他 MPR 格式当机器无法正确读取平台的 MPR 时，请尝试其他受支持的 MPR 变体，并向机器供应商获取一个已知可用的示例文件。
- 了解板件 2D CAM 编辑如何影响制造输出了解板件 2D CAM 模式可以为制造添加哪些内容，以及这些更改为何不会反映在 3D 设计中。
- Verify a nesting program with toolpaths and the NC simulatorOpen the nesting view on a single sheet to check raw or post-processed toolpaths, simulate the NC code and spot missing tools.
- 为什么 CAM 设置会因必填字段错误而无法保存了解 CAM 设置弹窗如何在允许保存之前验证您输入的内容。
- 为什么 .nc 文件中的 Z 值与配置的 Safe Z 不一致了解 Z Origin Reference 设置和贯穿切割间隙如何改变写入 .nc 文件的 Z 值，从而区分正确文件与真正的深度错误。
材料、五金和连接件49
- How connectors are assigned per scenarioLearn what a scenario is in connector setup and how it decides which connector is applied to a joint.
- Reduce a single panel's length using panel-level extensionShorten one specific panel by setting a negative extension on it at panel level in a construction style.
- Verify a completed design in QC modeOpen QC mode to see the materials, units and panels used in a completed design before verification.
- Add a connector to several units at onceAdd one connector to many units in a single pass by selecting the scenarios that need it in the Scenario view tab.
- Find and replace a material or edge band in QC ModeTrace which units and panels use a SKU and swap it for another across the design.
- Apply full or half overlay to selected scenarios before adding a connectorApply full or half overlay edits across all current scenarios in the design before adding a connector.
显示全部（49）
- Change edge bands in bulk from the production sectionChange the edge band on a line item in the production section and the change applies to every instance of that line item at once.
- Create a new construction style and add all reductionsCreate a new construction style or reuse an existing one, then add all the required reductions including the bottom reduction.
- Inspect units and panels in the QC Mode tabsRead the Units and Panels tabs to see annotations, rooms and where each material came from.
- Read a design's Raw Material Lists and Cabinet Composite BOQLearn what each Raw Material Lists tab and the Cabinet Composite BOQ show, and how to compare lists by item name rather than Sno.
- Read a panel's machining and edge-band drawing in 2D Panel CAM ModeOpen a panel's 2D Panel CAM Mode to see its hinge cups, drill and contour legends, edge-band labels and view options.
- Use X-ray mode to verify drilling before publishingSwitch the production view to X-ray mode to check drilling details on a single component or the whole cabinet, then click X-ray again to return to the solid view.
- Automate connector counts with rulesTell the software how to handle connectors for a given connection so connectors are added by rule.
- Change drawer bottom and carcass panel material at panel levelChange the core material of a drawer bottom panel or other drawer carcass panels by editing the material at the individual panel level in the production portal.
- Correct wrong materials and push the change to productionFix excess or wrong material types in the design and re-sync the work order so production picks it up.
- Inspect assemblies with exploded view, X-ray mode and panel hidingShow an exploded view with an adjustable explode percentage, toggle X-ray mode to see through parts, and turn off individual panels to inspect internal structure.
- Manage connectors on ticked scenarios from the Actions menuPick a connector and apply it to the ticked scenarios, and use a connector card's three-dot menu for Publish, Filter for this, Replace and Remove.
- Replace a connector in the connector card in manufacturing settingsUpdate the connector in the connector card within manufacturing settings so production output uses the changed hardware connector, then confirm it appears correctly in the design.
- 使用替换并选中规则替换连接件将一种连接件类型替换为另一种，并确认已替换的连接件数量。
- Replace unwanted hardware in manufacturing settingsConfigure the correct replacement hardware so the unwanted item no longer appears in the output.
- Review board layout settings on the MES portalReview board layout settings on the MES portal.
- Tell how many of each item is requiredUse the material and hardware summary to see how many of each item a design requires.
- 在衣柜构造设置中关闭后踢脚板在衣柜构造设置中关闭后踢脚板，使其不再出现在切割清单中。
- Understand the sliding wardrobe shutter system propertyLearn what the shutter system property controls in a sliding wardrobe.
- Verify connector placement and run a collision checkCheck that connectors are placed correctly and run a collision check.
- Visualise cabinet assembly with exploded viewsCreate exploded views to see how a cabinet goes together, then refresh admin settings to update columns and generate the CNC zip for machine upload.
- Visualise multi-finish shutters in the designSee how multi-finish on shutters can be visualised in the design.
- Add a finish condition to a panel glue manufacturing ruleAdd a finish condition to a panel glue manufacturing rule by setting the condition type to finish and choosing the tag operator 'equal to'.
- Add hardware to a box and handle closed-box warningsSelect hardware with an unpacked remainder, enter a valid quantity, and reopen a closed box if the warning appears.
- Add stability rails to wardrobes wider than 900 mmAdd stability rails as an option when a wardrobe is wider than 900 mm.
- Change material for specific panels using filter parametersFilter the panels in the finished materials view so a material change applies only to the units that match your criteria.
- Check and bulk-change core material by filteringFilter the materials view by core material to spot a wrong ply and swap it in bulk.
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Check where a panel's hardware came fromRead the connector source in the connector scenario view to tell whether a panel's hardware was inserted by a hardware rule or placed by hand.
- Define connector height ranges with an infinity upper boundDefine multiple bands for a connector's height range, including a final band with an infinity upper bound.
- Define custom LED strip sizes in the admin portalDefine any custom LED strip sizes in the admin portal so they are available for LED grooves in CNC output.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- Machine files do not output two separate groups for split shuttersWhen a shutter is split into two parts using a divisional shutter, the design and 3D view show two separate panels.
- Reproduce rejected panels using rejection recordsUse the rejection record kept for a rejected panel to reproduce it when remanufacturing.
- 通过生产连接件和场景恢复已删除的五金件在生产设计中打开该设计，进入 3D 以及连接件和场景，并从目录中重新分配普通玻璃等材料，以恢复已删除的五金件。
- Set dummy panel depth to 0 mm to fix Gola cut on blind unitsSet the dummy panel depth to 0 mm so the Gola cut and shelf reveal on a blind unit come out right.
- Track edge banding, core material and finish in panel schedulesCreate and download panel schedules as CSV to track edge banding, core materials and finishes and spot panels with discrepancies.
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand the Modular Units Hardware tabSee what the Hardware tab lists for each cabinet, how rows are grouped, and how to check panel drilling details.
- Understand the two hardware lists for procurement and assemblyLearn how the procurement hardware list and the assembly hardware list differ and which one the assembly team should use.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- Verify a cabinet before sending it to productionCheck a cabinet's SKU structure against the rules before you send it to production.
- Work out strip light drivers and screws manuallyPlace strip lights manually in the drawing so the running length is known, then work out the correct driver rating and screw quantities separately.
- Work with connectors and scenarios in single unit CAM modeOpen a cabinet's CAM menu in the production design to reach Single unit CAM Mode (Panel by Panel), Connectors and Scenarios, then manage each scenario of the selected panel.
板材跟踪和工位37
- Open QC Mode and understand its tabs and work scopeEnter QC Mode, see which work scope it opens on, and learn what each of the four tabs shows.
- Track scanned panel progress in a work orderSee the progress of any scanned panel inside a work order, with green ticks for panels scanned at a station and panel-by-panel status within a project.
- Grant MES roles per user and load mapped stationsTurn on MES roles for individual users without admin rights and reload so mapped station data appears.
- Reject and remake a panel from the manual tableReject a panel and remake it, then regenerate the remake's outputs from the Rejections tab.
- Set up stations and operators for panel trackingStart tracking with one person at a chosen station and add stations and operators as work progresses.
- Understand exempt panels at edgebanding and CNC stationsLearn why some panels are not trackable at edgebanding and CNC stations and where they appear.
显示全部（37）
- Understand Shipment page tabs and station permissionsLearn how the Shipment page's Loading and Unloading tabs depend on the stations mapped to you and what each view requires before you scan boxes.
- Add missing stations and print panel labelsReview the default stations for a new account, add any missing station from station settings, and print panel labels.
- Check per-panel station status on Order ProgressOpen the Order Progress tab to see each panel turn green as it passes each station.
- Create a custom-named station on a standard typeAdd a station by naming it and choosing one of the existing station types.
- Create MES users and stations with the right roles and typesSet up MES admins, MES operators and stations so tracking access can be assigned correctly.
- Deactivate tracking stations a factory does not scan atDeactivate any tracking station your factory does not want to scan at, and station types with no active station are left out of progress calculations.
- Filter tracking data by station status and download the listNarrow production tracking to panels by station status, then download the filtered list.
- 修复以错误工位类型创建的工位工位的类型在创建时即固定，无法编辑，因此请创建一个类型正确的替代工位，将其操作员转移过去，并停用旧工位。
- Get an alert when a panel has already been scannedScan panels on the mobile app and the system alerts you when the same panel has already been scanned.
- Handle rejected panels: retired codes, remakes and undoLearn how a rejected panel's code is retired, how the panel is remade with a fresh code, and when a rejection can still be undone.
- 未开始面板数量的计算方式了解生产跟踪中未开始数量包含哪些面板，以及该数量何时变化。
- 生产门户如何在车间支持质量控制了解生产门户如何呈现质量控制检查项和可直接用于机器的输出，同时不改变原始设计。
- How tracking records and statuses are storedLearn what each scan records, which tracking sources exist, and what item status shows.
- Map users to tracking stations and fix missing usersGive each MES user access to the stations they work at and understand why a user may not appear in the Operators list.
- Pick the station and scan panel labels on the phoneChoose the station on the phone before scanning, and only scan the panel's own label so the code is accepted.
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- Read tracked-panel counts per stationSee why counts differ between Panel Cutting, Edgebanding and CNC, and what a lower count at a later station means.
- Route projects to a factory or vendorConfigure machines per factory or vendor and route a project to the chosen one.
- Scan a panel QR to track it at a stationPoint the scanner at a valid panel label to mark the panel tracked at the currently selected station.
- Scan panels with a Bluetooth scanner or camera modeUse a slow-typing Bluetooth scanner or switch to camera mode, which shows each scan result as a self-clearing sheet on touch devices.
- Scan panels with a camera or hardware scannerUse the camera-based tracker at each station and know that every scan records its source.
- 在管理门户和 MES 门户中设置每用户访问权限在管理门户和 MES 门户中设置用户的权限，为每个用户授予正确的访问级别和 MES 角色。
- Set up an MES operator for tracking station scanningCreate the MES operator as a user in the admin portal with their email ID and map them to a tracking station before scanning can be used.
- Set up factory-floor tracking from workflow to first scanPlan your stations, create operators, assign them to stations and start scanning on Android devices.
- 关闭跟踪站而不是删除它在 Settings > Configure stations 中关闭跟踪站，使其从操作员的站点选择器中消失，同时其跟踪的面板保留历史记录。
- Track panels manually from the Manual tableOpen the Manual table, pick a published work order and track the panels you need at the station.
- Track panels with a phone camera or the Manual viewUse a phone camera or pick panels in the Manual view when no hardware scanner is at hand.
- Understand station-scan gating and scan orderLearn that gating is all-or-nothing and that scanning out of sequence is not blocked.
- Understand the nine station types and how panels are trackedLearn which station types are scan stages, which are box-based, and how default and extra stations behave as one stage.
- Understand where scan summaries are shownLearn that the platform shows a browser summary of which panel was scanned at which station and at what time.
- 为什么 QR 扫描被忽略并显示 'Scan ignored' 提示了解应用为何显示 'Scan ignored — <reason>' 提示而不接受扫描，以及 Tracking 和 Shipment 页面上每种原因的含义。
包装和发货24
- Create a box manually on the Packaging pageCreate a box manually on the Packaging page so the factory floor gets a packaging list to pack panels and box labels can be printed before packing.
- 创建箱子、打印其标签并关闭箱子以进行包装在生产界面中创建箱子、添加板材，然后打印标签并关闭箱子，即可包装切割好的板材。
- How the Shipment/Order Status counts are derivedLearn how boxes, panels and hardware each count towards shipment progress on the Order Status page.
- 读取包装计数并下载箱标签和清单在 Packaging 页面页眉中跟踪已包装的面板和五金件，然后下载 Box Labels、Packaging List 和 Unpacked Panels 的 PDF。
- Read the Shipment Loading view and open the Shipment SummarySee the selected shipment's status, loaded and pending boxes, and the actions available, then open its full Shipment Summary.
- Add panels to a box and print its label on the MES Packaging pageTick panels in the Manual panel selector, confirm adding them to a box, and print the box label to close it.
显示全部（24）
- Add panels to a box with the Manual panel selectorFall back to the Manual panel selector to filter panels by core, finishes, edge bands and operations and place them without scanning.
- 通过屏幕右侧的按钮创建包装箱在 Packaging 页面为工单创建新箱子，然后打印其标签并关闭箱子以完成包装。
- Create a shipment for a work orderOpen the Shipment section for the work order, create the shipment with driver, vehicle, dispatch and receiver details, then scan box labels to mark them loaded.
- 创建箱子、扫描标签并输入发货所需的运输详情创建用于包装的新箱子，确保所有面板均被跟踪，然后扫描箱子标签并输入发货所需的收货人、司机和车辆详情。
- Enable the packaging page and map operators to a Packaging stationPublish the work order and map each operator to a tracking station of type Packaging so the page is active.
- Fix packaging scans that are ignoredOpen a box and clear the invalid-QR popup so the packaging scan listener accepts your scans.
- Fix "Panel is already in Box" errors and move panels between boxesLearn why a panel can sit in only one box, what the error means, and how to move a panel to a different box.
- Handle invalid codes and duplicate or closed-box scansRead the reason for an invalid code, pick the panel manually, and confirm before adding to a closed box.
- Load and unload boxes on the Shipment pageScan box QR codes to load and unload boxes, use the tabs and unload list, and revert actions without losing track of records.
- 通过扫描箱标签装载待发货箱子在手机上登录并扫描箱标签，以装载待配送的物品，同时查看哪些箱子仍待装载以及每个箱子内装有什么。
- 打印箱标签并关闭箱子，或修复未能打印的标签在 Packaging 中打印箱标签，或不打印标签直接关闭箱子，并查明标签缺失或过期原因。
- Print labels and close boxes for the project stepDownload the labels and packaging listings, then print each box label and close the box until all boxes are done.
- Print or save the Shipment Summary for the driverOpen the Shipment Summary from the Shipment page and print it directly or save it as a PDF to send to the driver.
- 在移动应用中扫描箱子并查看发货摘要扫描箱子以检查其是否已装载，然后在移动应用中打开发货摘要。
- Track packaging and shipment in order progressUse order progress to track packaging and shipment so you can trace components missing during shipment.
- 使用项目装箱单跟踪装箱状态为每个项目创建装箱单，系统便会显示哪些物品仍未装箱。
- Track unpacked hardware while packing boxesUse the unpacked items list and remove hardware to return its quantity to the unpacked pool.
- Undo tracking and acknowledge a Panel Not Required alertUndo a tracking in one click from the success message or acknowledge the Panel Not Required alert.