板材排版与套裁
指南:95
- 在开料排版中查看成品尺寸、开料尺寸和纹理查看板件信息,了解成品尺寸、开料尺寸以及您工厂所需的纹理标注。
- 平台如何为板材切割生成生产板件排版图了解平台如何生成生产板件排版图,供您的车间团队按图进行板材切割。
- 分享开料排版和原材料报告分享厨房设计的开料排版和原材料报告,以便清点每张板材上的门板和板件,确认没有遗漏。
- 在板材排版设置中更改所有板材类型的切割图纸尺寸一次性为所有板材设置新的图纸尺寸,或为单一板材类型单独设置尺寸而不更改其余板材。
- Find grooves in the board layout and CNC fileConfirm a back-panel groove by checking the carcass panel's board layout and the CNC file.
- 旋转板件以适配,同时遵循纹理方向当板件与开料排版不匹配时,可通过旋转使其适配;当垂直纹理阻碍旋转时,可覆盖该板件的纹理方向。
- 下载板材排版、标签和贴面报告下载每种板材的板材汇总和排版文件,并分别下载板件标签、板材标签和贴面报告。
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- 下载锯切文件、开料排版和板件标签从已发布的生产工单中获取锯切 XML、开料排版 PDF 和板件标签。
- 下载开料排版图和板材汇总 PDF获取工厂团队用于核对切割和查看板件详情的 PDF,以便在生产前确认。
- 开料排版如何按材质和板件类型统计板材数量了解开料排版如何根据目录中定义的材质和板件统计板材数量,并列出每种板件类型的需求量。
- 木纹方向如何影响板材排版优化为每种饰面定义木纹方向,以便在优化板材排版时按木纹方向放置板件。
- 纹理方向如何影响开料排版中的板材数量了解为什么纹理或有方向性的饰面会迫使部件以固定方向排版,以及这会如何增加您所需的板材数量。
- 饰面纹理标记如何控制开料排版中板材的旋转了解板材的纹理要求如何来自其饰面上的纹理标记,以及为什么有纹理的板材在开料排版中不允许旋转。
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- MES 开料排版如何反映工单快照了解 MES 开料排版如何显示工单开料时捕获的设计状态,而不是之后的设计修改。
- 在设计方案的Board Layout中检查、移动和舍弃板件点击板件可查看其Panel info,拖动它可在图纸上移动,使用Discard Changes可恢复原布局。
- 在项目中调整板材排版设置在项目内更改利用率模式、封边注释和封边条注释依据。
- 更改板材尺寸或锯片设置以重新计算板材需求更改板材尺寸或锯片设置后,板材需求将重新计算。
- 为板材排版选择切割类型和优化标准设置板材是直线切割还是套裁,然后调整直线切割的优化旋钮。
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- 分别下载原材料和五金需求单在 production 选项卡中,分别下载木质原材料和五金原材料的需求单。
- 下载开料排版 PDF,并在平板电脑上裁切板件从已发布的生产工单下载开料排版 PDF,作为裁切指示交给工厂,然后在平板电脑上裁切并为每块板件贴标签。
- 生成后编辑工单的板材排版工单的板材排版生成后,可手动修改,而不必始终锁定于其来源的生产设计。
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- 探索 MES 中的Board Layout页脚、优化设置和输出了解 MES 工作订单中的全板材类型页脚、Optimization Settings、Exploded View输出和 Cutlist 类型下拉菜单提供哪些内容。
- 在板件层级将饰面旋转 90 度,以修复纹理对齐违规在板件层级将饰面旋转 90 度,使板件自动对齐到竖向纹理,违规即可消除。
- 背板材料分配如何影响饰面张数了解当背板使用与柜体不同的材料时,为什么某种饰面会显示比预期更多的张数。
- 板件排版如何将面板归入板材类型了解设计的板件排版如何将面板归入板材类型,并提出最省料的排版方案。
- 分张设置如何分割板材了解分张设置如何按设定分数分割板材,例如 250 mm 分数或长度 50/50 对分。
- 堆叠高度上限如何决定板材排版中的堆叠数量了解板材排版 / MES 输出中的最大堆叠高度设置如何决定一垛能放多少张板材。
- Half / Fractional Sheet Split Gap 的工作原理了解 Half / Fractional Sheet Split Gap 衡量什么、其默认值,以及哪些利用率模式会启用它。
- 板材排版边距如何运作了解板材排版边距的默认值、应用时机以及可修改的位置。
- 从开料排版中批量将某张切割单上的所有板件标记为已追踪当操作员未逐一扫描每块板件时,通过一次操作将切割单上的所有板件标记为已追踪。
- 自动为单元优化板材排版让软件为梳妆台、衣柜等单元计算板材排版和损耗,并可选择手动调整。
- 关闭板件后重新生成板材排版关闭除顶板和门板以外的所有板件,然后重新生成板材排版,使门板获得单独的排版。
- 在MES portal上查看板材排版设置在MES portal上查看板材排版设置。
- 设置余料板的最小空闲长度和分割边距控制余料在何时算作余料板,以及切割区域之间的间隙宽度。
- 在开料排版显示中堆叠板材并按顺序排列板材一次切割相同的板材,并选择板材在排版显示中的排列顺序。
- 了解切割计算中的板材尺寸和锯片厚度了解板材尺寸默认如何在两侧计入 10 mm 修边量,以及锯片厚度如何单独输入用于切割计算。
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- 为每种图纸类型选择优化标准为每种图纸类型选择一项标准,或使用“Overall”行将一项标准应用到全部,然后继续,无需重新计算。
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- 生成板材排版方案,然后选择接受、中止或重新生成打开 Board Layout 标签页开始生成,然后决定是接受目前最佳的排版方案、中止本次运行,还是强制重新生成。
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- Biesse 开料机文件中 Material.csv 和 Sheet.csv 的生成方式了解 Biesse (CIX) 开料机 zip 中的 Material.csv 和 Sheet.csv 主文件包含哪些内容,以及它们的行和板材尺寸是如何生成的。
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- 检查复合板并保留板材余料打开复合板以查看其芯材和组合件,并保留未使用的板材余料用于其他项目。
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- 将存在布局错误的板材的重新切割上限降低到 1 或 2仅针对存在布局错误的板材降低重新切割上限,以修复面板重叠或超出板面的板材。
- Select the room and refresh sheets after correcting a board layoutScope the board layout to the right room and hand fresh sheets to the factory after a correction.
- Set board dimensions and optimization settings for board layoutConfigure sheet sizes, stock offcuts, cutting type and saw width per board type so the board layout optimises correctly.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- 设置板材尺寸数量和Force Use为每个板材尺寸设置可用板材张数,每种板材类型保留一个不限量的尺寸,并标记优化器必须消耗的尺寸。
- 在套料 NC 程序中设置洋葱皮走刀与切透顺序控制切透是一次走刀还是两次走刀加工,并了解切透始终在程序最后执行。
- 在Edit Layout中放置已拾取的面板时切换图纸打开面包屑导航的图纸菜单,可在板类型的各图纸之间切换,并将已拾取的面板放置到所选图纸上。
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- 使用刀具路径和 NC 模拟器验证排料程序在单张板材上打开排料视图,检查原始或后处理的刀具路径,模拟 NC 代码并发现缺失的刀具。
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- View a board's layout with labelsClick an individual board to see its layout with labels.
- 下载切割清单和板材排版图,然后按芯材排序从已发布版本下载切割清单和板材排版文档,然后在 CSV 中按芯材排序,以获得特定板材类型的切割清单。
- 读取排板图上的板件编码和标签排板图上的每个板件都带有板件编码和标签,以便操作员在切割后将正确的标签贴在正确的板件上。
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- 切割清单与板材排版精度设置如何控制小数位数了解切割清单设置和板材排版设置中的精度控制如何决定尺寸显示的小数位数。
- 了解为什么切割清单标签和板材排版显示不同的尺寸了解为什么切割清单标签显示带小数的尺寸,而板材排版显示四舍五入后的整数。
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
更多指南 11
显示全部(11)
- 通过拆分或调整纹理方向修复尺寸超大的板件拆分尺寸超大的板件或修正其纹理方向,使其适合板材并纳入排版。
- 切割任务失败时检查余量和锯宽在别处查找切割数据错误之前,先将板材余量和锯宽与机器进行对比。
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Apply the small-part edge rule to panelsKeep small parts, including thin long panels, at the configured minimum distance from every sheet edge.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- 比较运行后查看 Optimization Statistics 模态窗口用 Decide after Comparison 运行排版,并查看每种图纸类型的图纸数量、处理时间和余料数据。
- 通过将余料添加为板材来重复利用余料将剩余的余料板添加为板材或编码,以便在后续项目中重复使用。
- Scan panels 配合蓝牙扫描器或相机模式请使用输入速度较慢的蓝牙扫描器,或切换到相机模式;在触屏设备上,相机模式会将每次扫描结果以自动清除的图纸形式显示。
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.