Board layout and nesting
Guides: 95
- Read finished size, cut size and grain on the board layoutCheck the panel info to see finished and cut sizes and the grain label your workshop expects.
- How the platform generates a production board layout for panel cuttingSee how the platform produces a production board layout your shop-floor team can follow for panel cutting.
- Share the board layout and raw material reportShare the board layout and raw material report for a kitchen design so you can count the shutters and panels on each board and confirm none are left unaccounted for.
- Change cutting sheet size for all board types in board layout settingsSet a new sheet size for every board at once, or give a single board type its own size without changing the rest.
- Find grooves in the board layout and CNC fileConfirm a back-panel groove by checking the carcass panel's board layout and the CNC file.
- Rotate a panel to fit while respecting grain directionFit a panel that does not match the board layout by rotating it, and override its grain direction when vertical grain would block the rotation.
- Download board layouts, labels and pasting reportsDownload the board summary and layout files for every board type, and get panel labels, sheet labels and pasting reports as separate downloads.
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- Download saw files, board layouts and panel labelsGet the saw XML, board layout PDFs and panel labels from the published work order.
- Download the board layout and board summary PDFsTake the PDFs the factory team uses to verify cuts and review panel details before production.
- How board layout counts boards by material and panel typeLearn how board layout counts boards from the materials and panels defined in the catalogue and lists the requirement for each panel type.
- How grain direction affects board layout optimizationDefine grain direction for each finish so panels are placed according to their grain when the board layout is optimized.
- How grain direction affects sheet count in nestingLearn why a grain or directional finish forces panels to nest in a fixed orientation and how that can raise the number of sheets you need.
- How grain flags on finishes control panel rotation in board layoutLearn how a panel's grain requirement comes from the grain flag on its finish and why a grained panel is not allowed to rotate in board layout.
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Inspect, move and discard panels in a design's Board LayoutClick a panel to see its Panel info, drag it to move it on the sheet, and use Discard Changes to put the layout back.
- Adjust board layout settings inside a projectChange utilisation mode, edge annotations and edgeband annotation basis from within a project.
- Change board size or blade settings to recalculate board requirementChange the board size or blade settings and the board requirement is recalculated.
- Choose the cutting type and optimisation criteria for board layoutsSet whether boards are cut straight or nested, then tune the straight-cut optimisation knobs.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Download raw material and hardware requirement sheets separatelyDownload separate requirement sheets for wooden raw materials and hardware raw materials from the production tab.
- Download the board layout PDF and cut panels on a tabletDownload the board layout PDF from a published work order to hand to the factory as the cutting instruction, then cut and label each panel on a tablet.
- Edit a work order board layout after generationChange a work order's board layout by hand after it has been generated instead of keeping it locked to the production design it came from.
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- Explore the Board Layout footer, optimization settings and outputs in MESLearn what the all-board-types footer, Optimization Settings, Exploded View output and Cutlist type dropdown offer in an MES work order.
- Fix grain-alignment violation by rotating finish 90 degrees at panel levelRotate the finish 90 degrees at panel level so the panel aligns itself to the vertical grain and the violation clears.
- How back panel material assignment affects finish sheet countLearn why a finish can show more sheets than expected when a back panel uses a different material from the carcass.
- How board layout groups panels into board typesLearn how a design's board layout groups panels into board types and proposes a least-waste layout.
- How fractional sheet settings split a sheetLearn how fractional sheet settings divide a sheet by a set fraction, such as a 250 mm fraction or a 50/50 split of the length.
- How stacking height limits stack count in board layoutLearn how the maximum stacking height setting in board layout / MES output determines how many boards fit in one stack.
- How the Half / Fractional Sheet Split Gap worksLearn what the Half / Fractional Sheet Split Gap measures, its default value, and which utilization modes enable it.
- How the board-layout margin worksLearn what the board-layout margin defaults to, when it is applied and where you can change it.
- Mark all panels of a cut sheet as tracked in bulk from board layoutMark every panel on a cut sheet as tracked in one action when the operator has not scanned each panel individually.
- Optimize board layouts for units automaticallyLet the software calculate board layouts and wastage for units such as vanities and wardrobes, with the option to adjust manually.
- Regenerate board layout after turning off panelsTurn off all panels except the top and shutter panels, then regenerate the board layout so the shutter panels get their own separate layout.
- Review board layout settings on the MES portalReview board layout settings on the MES portal.
- Set the minimum free length and split margin for fractional sheetsControl when a leftover counts as a fractional sheet and how wide the gap between cut areas is.
- Stack sheets and order sheets in the board layout displayCut identical sheets in one pass and choose how sheets are ordered in the layout display.
- Understand board dimensions and blade thickness in cutting calculationsLearn how board dimensions account for 10 mm trimming on both sides by default and how blade thickness is entered separately for the cutting calculation.
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- Choose the optimisation criterion per sheet typePick a criterion for each sheet type, or apply one to all with the Overall row, then continue without recomputing.
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- Generate a board layout and choose Accept, Abort or Re-generateOpen the Board Layout tab to start generation, then decide whether to accept the best layout so far, abort the run, or force a fresh regeneration.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- Inspect a composite sheet and keep the board remainderOpen a composite sheet to see its core material and combined pieces, and keep the unused board remainder for other projects.
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- Reduce recut limit to 1 or 2 for sheets with layout errorsFix sheets whose panels overlap or go outside the board by lowering the recut limit for those sheets only.
- Select the room and refresh sheets after correcting a board layoutScope the board layout to the right room and hand fresh sheets to the factory after a correction.
- Set board dimensions and optimization settings for board layoutConfigure sheet sizes, stock offcuts, cutting type and saw width per board type so the board layout optimises correctly.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- Set board size quantities and Force UseGive each board size an available sheet count, keep one size unlimited per board type, and mark sizes the optimizer must consume.
- Set onion-skin passes and through-cut ordering in nesting NC programsControl whether through-cuts are machined in one pass or two, and know that they always run last in the program.
- Switch sheets while placing a picked panel in Edit LayoutOpen the breadcrumb's sheet menu to move between a board type's sheets and place the panel you have picked up on the sheet you choose.
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- Verify a nesting program with toolpaths and the NC simulatorOpen the nesting view on a single sheet to check raw or post-processed toolpaths, simulate the NC code and spot missing tools.
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- View a board's layout with labelsClick an individual board to see its layout with labels.
- Download cut lists and board layouts, then sort by core materialDownload your cut list and board layout documents from the published version, then sort the CSV by core material to get cut lists for specific board types.
- Read panel codes and labels on a board layoutEach panel on a board layout carries a panel code and a label, so the operator can paste the correct label on the correct panel after cutting.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- How cutlist and board layout accuracy settings control decimal placesLearn how the accuracy control in cutlist settings and board layout settings decides how many decimal places sizes are shown with.
- Understand why cut-list labels and board layouts show different sizesLearn why a cut-list label shows a size with decimals while the board layout shows rounded whole numbers.
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
More guides 11
Show all (11)
- Fix an oversized panel by splitting or re-graining itSplit an oversized panel or correct its grain direction so it fits the board and joins the layout.
- Check margins and saw width when a cutting job failsCompare the board margins and saw width with the machine before looking elsewhere for a cut-data error.
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Apply the small-part edge rule to panelsKeep small parts, including thin long panels, at the configured minimum distance from every sheet edge.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- Read the Optimization Statistics modal after a comparison runRun the layout with Decide after Comparison and read each sheet type's sheet count, processing time and offcut figures.
- Reuse offcuts by adding them as panelsAdd a leftover offcut board as a panel or code so it can be used in a later project.
- Scan panels with a Bluetooth scanner or camera modeUse a slow-typing Bluetooth scanner or switch to camera mode, which shows each scan result as a self-clearing sheet on touch devices.
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.