Production
ガイド：480 · セクション：10
生産設定とワークフロー53
- Lock the design to prevent clashes between design and production editsLock the design when a designer and a production person may edit it at the same time, so the designer cannot make changes until the admin or design head unlocks it.
- 同じ設計を共有するか、製作設計のコピーを作成します編集が自動的に同期されるように同じ設計を共有するか、独立したままの製作設計のコピーを作成するかを決定します。
- Choose copy or share when sending a design to productionDecide whether to create a production design copy or share the same design when sending a design to production.
- Send a design from the design portal to productionCreate the design and drawings in the design portal, then hand it to the production portal for checking before it reaches the shop floor.
- 共有デザインがProduction Designsにどのように表示されるかを理解するShare Same Designで送信したデザインが、デザインポータルのProduction Designsにどのように表示され、デザインとどのようにリンクされ続けるかを学びます。
- デザインポータルから製造QC、MESへとデザインがどのように流れるかデザインポータルから製造チームのQCチェックを経て、その成果物が利用可能になるMESポータルまでのプロジェクトの流れを追います。
すべて表示（53）
- Publish a work order so it appears in the MES portalPublish or republish a design so its work order becomes available to the factory team in the MES portal.
- Create a production design in copy modeCreate a production design in copy mode instead of share mode.
- 制作設計ポータルで作業範囲を作成し、カットリストにアクセスする特定のエリアの作業範囲を作成すると、そのカットリストを生成し、原材料の部品表に到達できます。
- How the production workflow runs from design to work orderFollow how a finalised design moves through production and into the work order, carrying its materials with it.
- How work orders are created and republished from design filesLearn how each design file sent to production becomes its own work order, how updates republish it, and why components stay together.
- Publish a production design as a work orderApply the hardware and connector selections on the production design, then publish it as a work order.
- カタログ変更後に出力キャッシュを更新して再同期する仕上げ材または芯材の設定を変更した後は、出力キャッシュを更新して、更新された木目と材料のプロパティがカットリストと板取りレイアウトに反映されるようにします。
- Access production design from the main appReach production design from the main app rather than a separate production-design subdomain or portal.
- ワークスコープで複数の部屋を1つの作業指示書にまとめるワークスコープを使用すると、複数の部屋を1つの生産ロットにまとめたり、別々の作業指示書に分割したりできます。
- Edit channels in production design without returning to designCorrect a channel directly in the production design module after a design has been sent to production, without going back to the design module.
- Edit connector and construction changes through production designSend the design to production from Outputs, create a new production and open the production design so you can review and modify connector scenarios there.
- 設計からカットリストと生産出力を生成する設計から生産までを1つのフローで行い、別々の2D CAD図面の代わりにモデルからカットリスト、金物リスト、設置ガイドを生成します。
- Publish a checked cut list to a work orderPublish a confirmed cut list so you can download the work order and get the final cutting list and machine outputs.
- Publish a job to the MES portalPublish the job to the MES portal from the production design portal so it reaches production.
- Republish a design so the work order cut list is up to dateMake or verify a change in the production design and republish it so the work order cut list picks up the updated values.
- ソースデザインからプロダクションデザインを再同期するソースデザインからプロダクションデザインを再同期してユニットを追加、削除、変更し、確定する前に影響を確認します。
- Understand what a workscope is in Production > Work ScopesLearn what a workscope covers and how separate workscopes are set up for the outputs you need.
- Update and resync a design to push it to productionUpdate the design and use the resync feature to push it to production.
- Verify materials with QC and create a work orderCheck that core, finished and edge band materials are correctly applied, then create a work order and download its outputs.
- Add machines after publishing and refresh the machine listAdd a beam-saw or CNC machine in Settings > Machines and make it appear on the published work order without republishing.
- Choose which stages a job usesDecide which station types contribute to progress and leave out Packaging and Shipment for smaller jobs.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Download technical documentation summary from production portal after transferGet a technical documentation summary covering part codes, dimensions, materials, finishes and edge band specifications after transferring a project to production.
- Find CAM mode in Infurnia Production, not DesignLearn where CAM mode is available and why cabinets no longer show it while you work in the Design module.
- Find your way around a production design copy's Production tabOpen a production design copy and use the Production tab toolbar and the Differences between work order and design dialog to compare the work order with the design.
- How work order numbers are assignedLearn that the work order number shown in the project is assigned by Infurnia and cannot be edited by the user.
- Limit a scenario change to the current designScope a construction or CAM scenario change to the current design instead of applying it globally.
- Pack panels into boxes and ship themScan panels into a box on the Packaging page, then complete shipment by scanning the box.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Publish a work order to unlock downloadsPublish the work order so its downloads become available and an immutable published design version is created.
- マシン出力を生成する前に、管理者からCAM設定を更新してください管理者が設定した最新のCAM設定を取得して適用すると、違反なしでマシン出力をダウンロードできます。
- Refresh cutlist settings from Admin and republishPull the latest cutlist settings from the Admin portal and republish the design so updated production files can be downloaded.
- 管理画面から設定を更新し、出力をダウンロードする前に適用します最新の管理設定を更新して適用し、その後で出力ファイルをダウンロードして、出力に大きな問題がないことを確認します。
- Resize a unit without breaking MES calculationsChange a unit's dimensions in the design and its production calculations follow the updated size, because it stays the same unit.
- MESリリース前にデザインをレビューする生産マネージャーはデザインをレビューし、MESにリリースする前にプレミリングなどの値を変更できます。
- Review designs in the production design portal before a work orderBefore a work order is created, use the production design portal to review the design construction-wise.
- Review what changed and when in production design versionsOpen the Versions & History dialog in the production design to see each change with its action, timeline and user, so you can review what was changed on a given day.
- Send a design to production from the homepageOpen the three-dashes menu on the homepage and choose Send to Production to send your design to production.
- Send designs for production via email from the portalSend a design directly by email from the portal so it reaches production.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- 制作デザインのリンクを共有する制作デザインのデザインリンクには、通常の共有リンクを使用してください。
- アーカイブ済みリストから製作デザインのアーカイブを解除するアーカイブ済みの製作デザインを、Production Designs > Archived リストから進行中に戻します。
- 制作デザイナーの役割を理解する制作デザイナーがデザイナーと工場チームをどのようにつなぎ、生産前にデザインを検証するかを学びます。
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- Use consistent project naming so production can identify the jobTrack each job through production by relying on the project name, designer and status.
- Use Outputs > Production Settings in the design editorOpen Outputs > Production Settings to refresh the cache, check for overlapping modular units and reassign unit, panel and cabinet finish annotations.
- カットリストを検証し、プロジェクトをMESに送信する設計が確定したら、カットリストを検証し、工場生産のためにプロジェクトをMESポータルに送信します。
作業指示と公開31
- Download board layouts, labels and pasting reportsDownload the board summary and layout files for every board type, and get panel labels, sheet labels and pasting reports as separate downloads.
- パネルを生産出力から除外する生産に送る前にサブセットを選択するかパネルを非表示にすることで、パネルをカットリストとスケジュールから除外できます。
- How saw file formats are chosen for the production machineLearn how the production machine's output type decides the saw file format and what the beam saw operator should check.
- Verify edge bands and cutlist before productionCheck edge bands, back panels and cutlist output in QC Mode before releasing the design.
- Download files from a published work orderOpen the published version of a work order to download raw-material CSVs and machine saw files.
- 違反リストから干渉を解決する干渉を解消するには、違反リストを開き、そこの干渉解決アクションを使用します。モデル上の干渉マーカーはリストの項目と一致します。
すべて表示（31）
- パーティション幅の変更または衝突の解決によりドリル衝突を解決する単一ユニットCAMモードでドリルおよびドリル衝突パネルの違反を確認し、より大きな問題にはsolve collisionsを使用します。
- 要素がすべての出力から除外される理由を確認する除外理由を1つずつ確認して、要素がすべての出力から欠落している理由を特定します。
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- Download a machine cutlist and handle unsupported formatsOpen the Cutlist tab, pick a panel-saw machine and fall back to CSV when the machine's format is not supported.
- Find and open board layout violationsSpot board types with violations and open the read-only violations view to see the offending panels.
- パネル、金物、棚の衝突を示す違反を修正する設計で違反が発生する原因と、自動または手動で解消する方法について説明します。
- Generate a board layout and choose Accept, Abort or Re-generateOpen the Board Layout tab to start generation, then decide whether to accept the best layout so far, abort the run, or force a fresh regeneration.
- How output quantity above 1 duplicates panels with _1/_2 labelsSet a cabinet's output quantity above one and see how its panels are laid out and labelled as copies while sharing a single CNC file per panel.
- 違反リストから設計の違反を確認する製造出力を生成する前に、違反リストを開いて保留中の違反を確認してください。
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- Verify cut list and clear violations before sending to factoryQuality-check the board layout and review the cut list of panel sizes before a design goes to the factory.
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- 公開時の違反を確認して、寸法がゼロまたは無効なパネルを見つけます制作ファイルをダウンロードする前にデザインを公開して違反リストを確認すると、寸法がゼロまたは無効なパネルを見つけられます。
- 公開済みのワークオーダーでパネルとシートのラベルテンプレートを選択するワークオーダーを公開するとステッカーとラベルの設定が利用可能になります。その後、ボードレイアウトのデフォルトのパネルラベルテンプレートとシートラベルテンプレートを選択します。
- Edit Work Scope > Show Units でユニットを一括無効化するBulk Disable でユニットをオフにすると、カードのステータスが上書きされ、Removed Units に移動します。
- 設計に保留中の違反がある場合にカットリストPDFをダウンロードする設計に保留中の違反が残っている場合でも、それらの違反が対象とするスコープとチェックを確認したうえで、Cut List PDFをダウンロードできます。
- 未解決の違反がある作業指示書をダウンロードする作業指示書に未解決の違反が残っている場合、MESポータルはダウンロード前に、出力が正しくない可能性があることを警告し、対応を選択させます。
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Exempt violations to hide production errors from designersHide production issues and errors from designers by exempting violations in the admin settings.
- 再同期で部屋のスコープが変わった後にユニットを復元するソースデザインとの再同期でユニットが削除されたように見える場合は、確認画面に表示される部屋のスコープを確認し、'Units removed from manufacturing'からユニットを復元してください。
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- PDブランチを再同期し、両方のブランチの変更を保持するPDブランチを再同期して、両方のブランチで行われた変更を保持したまま更新します。競合するPDブランチの変更は破棄されることに注意してください。
- Review and accept admin setting differences on a work orderSee which work order settings differ from the admin values and accept them to continue to the Violations check or a CNC machine-files download.
- 制作設計の干渉を解決する違反から干渉を解決するを実行すると、CAM Settingsで設定した量だけコネクタが移動します。各変更を確認してください。
カットリストの列と設定65
- カットリストの列をカスタマイズし、エッジバンドの厚さを含める必要なカットリストの列を設定し、エッジバンドの厚さを計算に含めるかどうかを決めます。
- 製作カットリストに仕上がり寸法と並べてカット寸法を表示するオプションのカット列をオンにすると、カットリストにエッジバンド加工前のカット寸法が仕上がりパネル寸法の隣に表示されます。
- エッジバンドの厚さが仕上がりの扉サイズに与える影響パネルごとにエッジバンドがどのように貼られ、その厚さがパネルのエッジバンド設定のどこに表示されるかを説明します。
- プレミリングとエッジバンドのCut LとCut Wを表示するAdd the Cut L and Cut W columns so the cutlist shows cutting size alongside finished size.
- カットリストで切断サイズとエッジバンディングの列を有効にしてパネルを確認するカットリストで切断サイズとエッジバンディングの列をオンにすると、パネルのサイズがエッジバンドとプレミリングの設定と一致しているか確認できます。
- Get CAM details, cut list and raw material BOQ from a production designProduce CAM details, the cut list and the raw material BOQ together from a production design, scoped and downloaded as you need.
すべて表示（65）
- How panel sizes include edge band and laminate in the cut listLearn how the Finished Size and Cut Size columns in the production cut list differ, and which size CAM output uses.
- シャッターパネルを非表示にしてキャカスのみのカットリストを取得するカットリストを生成する前にシャッターパネルを非表示にすると、キャカスと表示される側面のみが出力されます。
- Fix panel size discrepancies caused by edge band thicknessMake sure the edge band's actual thickness value is correct, because the software calculates panel size from it rather than from its name.
- Get edge banding quantity from the softwareAdd the exact edge band you use to the setup so the software can give you its quantity.
- Show edge band, panel name and size columnsTurn on the edge band column and read panel name, finished size and cut size in the cutlist.
- パネルにカスタムラベルを追加し、カットリストに表示するカスタムパネルを含むパネルにカスタムラベルを追加し、カスタムラベル列を有効にすることで、カットリストとステッカーに表示できます。
- 重なり合うアイテムにはラベルプロパティでカスタムラベルを追加するレイアウト上でラベルが重なる場合は、ラベルプロパティでカスタムラベルを追加し、必要な場所に配置します。
- Choose what prints as the panel name on labelsSet the panel-name element on a label template so the printed label, preview and machine files show the design name, the custom label or a combined name.
- How edgeband lengths in the BOQ are calculatedSee how extensions, edge profiles, pre-milling, cut shapes and wastage adjust each band's BOQ length so you can reconcile the totals.
- How mapped edge band thickness drives cut list dimensionsLearn how the edge band thickness mapped to a material directly affects the cut list dimensions.
- カットリストのパネルの並び順とグループ化について理解する製造用カットリストでパネルがキャビネットごとに昇順でどのように一覧表示されるか、また各パネルの部屋を確認する方法を学びます。
- Choose the cutlist type and export the cut list CSVSwitch the cutlist type on the Cutlist tab and export a CSV that follows the selected type for beam saw machines.
- 制作設定でカットリストの列と寸法精度を構成する必要なカットリストのフィールドをオンにし、寸法精度を設定して、制作出力の寸法が希望どおりに丸められるようにします。
- 製作ビューからカットリストをダウンロードする製作ビューからパネルリストをExcelまたはPDFファイルとしてダウンロードし、その列を確認します。
- Read panel dimensions in the cut size columnFind each panel's dimensions in the cut size column of the cut list.
- Understand cut edgeband on panels with cut or slanted edgesLearn when a panel carries a cut edgeband and why rectangular panels correctly show 'No Edgeband'.
- Generate and download a cut list with cut length and edge bandsGenerate a cut list from the production module and download it, enabling parameters such as cut length and edge bands before generating.
- How cutting size is calculatedLearn how cutting size subtracts edge banding and pre-milling from the panel dimension.
- How shelf depth is calculated in cut listsLearn how an adjustable shelf's depth is derived from the carcass depth, the shelf reveal and the back panel offset.
- Set board sizes, offcuts and saw width in Board Layout SettingsGive each board type its sheet sizes and stock offcuts, set the cutting type and saw width, and override the size for a single board when needed.
- Set pre-milling type and read edgeband columns in the MES cutlistChoose how pre-milling is applied and read each edge's band and cut length in the MES cutlist.
- Understand shutter sizing in a child partitionLearn why a shutter added to a child partition takes its size from that partition rather than the overall unit height.
- Understand skirting notches on wardrobe carcass side panelsLearn which units get skirting cuts on carcass side panels, how each wardrobe type maps its cuts, and what to check when a notch is missing.
- Add Combined Label and room name columnsTurn on the Combined Label and room name columns and move room name to the top of the cutlist.
- Change the cabinet code shown in cutlist outputsEdit the cabinet code field's display name in the Homag or Biesse tab of Cutlist Preferences so your cutlist outputs show the column name you want.
- Check which downloads need a published work orderSee which footer downloads stay disabled on an unpublished work order and which ones remain available.
- How cut dimensions relate to finish dimensionsLearn when a panel's cut length and width match its finish dimensions and when edgebanding makes them differ.
- How cutlist and board layout accuracy settings control decimal placesLearn how the accuracy control in cutlist settings and board layout settings decides how many decimal places sizes are shown with.
- How cut list panel names use unit and panel codesLearn how each cut list panel is identified by a unit code plus a panel number and how that identifier links back to the 3D model.
- How the Room Name field in cutlist labels is filledLearn where the Room Name field in the cutlist/label export gets its value and what it shows when a project has no room defined.
- Identify rooms in the cut list without renaming cabinetsShow the room name as a separate column in the cut list so you can tell which room each cabinet belongs to without changing the cabinet name.
- ワークスコープでカットリストを1つの部屋に限定する1つの部屋のワークスコープを作成すると、カットリストにはその部屋のキャビネットのみが反映されます。
- Open Cutlist Settings and apply column changesOpen Cutlist Settings from the cutlist header and apply visibility, naming and order changes per cutlist type.
- Review cut list by cabinet then panel detailsOpen a cabinet's cut list, check each panel's details and mark panels verified, and view the unit visually to confirm rails, shelves and back panel position.
- Set pre-milling type by edge-band thickness or for all panelsChoose whether pre-milling follows each panel's edge-band thickness or applies the same setting to all panels, then save and recalculate to verify the cutting length.
- Set the grain convention and show grain in panel infoChoose how grain is labelled and see the Grain row in the board layout's panel info.
- Understand fixed shelf depth and partition dimensionsLearn that the partition refers to the space within the carcass, not the outer panel, when reading fixed shelf depths.
- Add extra custom columns to a cutlist exportLearn how many extra custom columns you can add beyond the standard fields when exporting a cutlist for a third-party saw or ERP system.
- Change a panel's core in QC mode > Panels > Modify PanelsSet a panel's Core Material Source and, when you need a different core for that panel alone, switch the Source to Custom and change it.
- Change the cabinet code label in cutlist preferencesChoose the Cabinet Code field for cutlist output and set its display name on the Homag, Biesse or Basic tab.
- Choose between a full top panel and half railsLearn how a full top panel uses more material and gives different panel sizes than half rails.
- Control cut list columns and their exported orderFilter rows with the search box and set column visibility, names and order so the export matches the screen.
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- Enable material code column to group cutlist by core materialUse the material code column, which carries core material information, to group the cutlist by core material.
- How back panel material assignment affects finish sheet countLearn why a finish can show more sheets than expected when a back panel uses a different material from the carcass.
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- How construction edges change carcass panel sizes in the cutlistLearn how the inset or outset choice at each shared carcass edge changes panel sizes in the cutlist.
- Read part codes and part names in the cut listLearn how the part code and part name in the cut list tell you which cabinet and which panel a row belongs to.
- Remove cut length and cut width columns when pre-milling is usedHide the cut length and cut width columns from the cut list display when pre-milling makes them unnecessary.
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- Set dimension accuracy and header options per cutlist typeSet dimension accuracy to 1 mm and switch on project and store header rows for the cutlist type you are working with.
- Set elevation preferences in the admin portalControl which panels appear as additional manufacturing details in elevations by setting the elevation preferences in the admin portal.
- CSV出力と選択した列を使用するパネルソーを設定する切断用パネルソーを設定し、部品コードを先頭に、必要な列を含むCSV切断リストを出力します。
- Show client name and work order code columns in the cutlistSwitch on the client name and work order code columns in the cutlist field settings so they appear alongside the room name.
- Show material code alone by turning off finish columnsCombine the core material code with the external and internal finish codes into one material code and hide the separate finish columns for a more compact cutlist.
- Basic cut list の内容とユニットのパネルの見つけ方Basic cut list に表示される内容、Operations 列と Quantity 列が表示される条件、およびその中でユニットのパネルを検索する方法を説明します。
- Understand why PVC skirting is not on the cut listLearn that PVC skirting is bought readymade, so it is never cut from wood and never appears in the cut list.
- Use pre-milling to compensate for edge-band thicknessApply a per-side pre-milling allowance instead of cutting panels oversize, and decide whether your factory needs pre-milling at all.
- カットリストでプレミーリング列が必要になる場合カットリストのプレミーリング列がいつ必須になるか、またパネルのエッジごとにプレミーリング設定が異なる場合にのみ役立つのはいつかを説明します。
カットリストの出力と機械フォーマット52
- NCおよびビームソーマシン向けのInfurnia CSVカットリストの仕組みNCまたはビームソーマシン向けのInfurnia CSVファイルに含まれる内容と、マシン側に委ねられる内容について説明します。
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- ワークオーダーからカットリストと原材料の出力をダウンロードするワークオーダーを公開してから、制作ポータルからカットリスト、原材料リスト、板取り図をダウンロードします。
- Match each machine Output selection to its file formatSee which file extension each machine Output selection produces, from .mpr and .cix to .nc, .xml and .dxf.
- カットリストと板取り図をダウンロードし、芯材で並べ替えます公開バージョンからカットリストと板取り図のドキュメントをダウンロードし、CSVを芯材で並べ替えると、特定の板種類のカットリストを取得できます。
- 切断レイアウト、カットリスト、CNCファイルを出力お使いの鋸や機械用の板取りレイアウト、カットリスト、CNCファイルを取得できます。
すべて表示（52）
- 材料、金物、BOQリストを出力調達と確認のために、材料、金物、板種、BOQのリストを作成します。
- Add a machine in MES machine settingsAdd a machine by choosing its type, category and output format, then enter its name and settings.
- カットリストの列を選択してパネルスケジュールCSVをエクスポートする62個のカットリスト列から表示する列を選び、情報行とエッジバンドの長さを含めてパネルスケジュールをCSVにエクスポートします。
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- How drill information and the cut list come from hardwareLearn how the hardware you define in the design produces drill information and the cut list.
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Download a raw material summary for a completed projectDownload a raw material summary of core, finish and edge band material once the project is complete.
- Explore the Board Layout footer, optimization settings and outputs in MESLearn what the all-board-types footer, Optimization Settings, Exploded View output and Cutlist type dropdown offer in an MES work order.
- Get a screw-level hardware list from production outputSee how production output gives you a basic hardware list, and how configuring hardware setup lets it detail individual items such as which screw is used and how many are required.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- パネル図面PDFでドリル位置、凡例、線種を確認する手動パネル図面PDFが各ドリルの位置、サイズ、種類をどのように示すかを学び、現場で読み取れるようにします。
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- 機械の出力を選択する前に、対応しているファイル形式を確認してください出力形式を選ぶ前に、お使いの機械が受け付けるファイル形式を確認し、プラットフォームが提供する互換性のある出力を試してください。
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure cutlist export options and pre-millingSet dimension accuracy, quotes, header rows and pre-milling values so exported cutlist values come out correct.
- Confirm the format a machine accepts before exportingCheck the machine's supported format before exporting cut list and production data, and plan a CSV workflow when DXF carries geometry only.
- Download a machine-specific cutlist from Custom CutlistPick a panel-saw machine from the Custom Cutlist menu to download the cutlist formatted for that machine.
- Download a PDF of the production layoutDownload a PDF of the production layout from the toolbar in the production layout view.
- Download CNC file as a zip and upload it to the machineDownload the CNC file, extract the zip and upload the extracted file to the CNC machine.
- Download countertop information as an Excel fileDownload the countertop information as an Excel file so you can review it or use it further.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Download machine files for a CNC machineDownload the machine files for a CNC machine from its Machine Files download option, and use the menu beside it for DXF output.
- Download optimization XML and label outputsRun optimization to generate an XML file and label outputs, then confirm and download them from the optimization results for downstream machine and production consumption.
- Download project outputs as PDF or XLSGenerate project outputs and download them in either PDF or XLS format, with a single module's output showing panels, hardware, sizes, material and finish.
- Download raw material and hardware requirement sheets separatelyDownload separate requirement sheets for wooden raw materials and hardware raw materials from the production tab.
- Download raw material list as PDF or CSVGet the plan and quantity for each item, then download the raw material list from the MES work order as a PDF or CSV files to hand to the factory team.
- Download saw files, board layouts and panel labelsGet the saw XML, board layout PDFs and panel labels from the published work order.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download saw files, nesting files and panel labelsUse the footer menus to download machine-formatted files and numbered labels for the current scope.
- Download the board layout PDF and cut panels on a tabletDownload the board layout PDF from a published work order to hand to the factory as the cutting instruction, then cut and label each panel on a tablet.
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- マシンセットアップの設定の仕組みマシンセットアップを一度設定すると、以降のすべてのジョブで再利用できる方法を説明します。
- How the Profile Cutting List and Profile 1D Layout are generatedLearn how the Profile Cutting List is generated from the sizes entered for glass shutters with profiles all around, and how the Profile 1D Layout shows each profile piece cut from the stock length and what remains.
- カットリストのエクスポート形式を鋸盤に合わせるお使いの鋸盤ブランドで動作することが確認されているカットリストファイル形式を選択してください。インポートしたパネルの寸法が正しく保たれます。
- Open the raw materials output and download lists as CSV or PDFOpen the raw materials output from the outputs tab and download the material and hardware lists you need.
- Pull latest Tool and CNC settings from AdminRefresh Tool and CNC settings from the Admin portal into the current work order via Settings.
- 不整合を診断する前に、ワークオーダーからSAWファイルを新たに再ダウンロードするワークオーダーからSAWファイルを新たにダウンロードすると、マシンは古いエクスポートではなく現在のデザイン寸法を読み取ります。
- 部屋ごとの原材料数量を確認する部屋ごとに個別のワークスコープを作成し、Raw Materials セクションで切り替えます。
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- Understand hardware quantities rounded up to whole setsLearn why per-set hardware quantities in the Raw Material list are rounded up and how to check a quantity that looks too high.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.
- Use KD XML format for cutting filesChoose KD XML as the output format when you generate cutting files for cutting operations.
- 各生産チームに渡す出力ファイル各生産チームに必要な出力ファイルを渡します。切断にはXMLソーファイル、購買にはパネル材と金物のPDF、組立には複合キャビネットBQです。
板取りレイアウトとネスティング69
- 板取り図と原材料レポートを共有するキッチンデザインの板取り図と原材料レポートを共有すると、各板に含まれる扉とパネルを数え、数え漏れがないことを確認できます。
- プラットフォームがパネル切断用の生産ボードレイアウトを生成する方法プラットフォームが、現場チームがパネル切断に従える生産ボードレイアウトをどのように作成するかをご覧ください。
- Enable stacking per work order and set maximum stack heightTurn on stacking for a work order and set how high boards may stack in its board layouts.
- How the Half / Fractional Sheet Split Gap worksLearn what the Half / Fractional Sheet Split Gap measures, its default value, and which utilization modes enable it.
- How board layout counts boards by material and panel typeLearn how board layout counts boards from the materials and panels defined in the catalogue and lists the requirement for each panel type.
- How grain direction affects board layout optimizationDefine grain direction for each finish so panels are placed according to their grain when the board layout is optimized.
すべて表示（69）
- How grain direction affects sheet count in nestingLearn why a grain or directional finish forces panels to nest in a fixed orientation and how that can raise the number of sheets you need.
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Read the legends and review panel details before productionUse the legends and PDFs to check grain direction, grooving, edge bands and material details before cutting.
- Rotate a panel to fit while respecting grain directionFit a panel that does not match the board layout by rotating it, and override its grain direction when vertical grain would block the rotation.
- Set dimension accuracy and compare fractional-sheet wasteChoose the dimension accuracy for the layout output and use the waste percentage to compare layouts.
- Change board size or blade settings to recalculate board requirementChange the board size or blade settings and the board requirement is recalculated.
- Configure small-part rules and the split marginDecide when a part counts as small, how far it stays from sheet edges, and how wide the split margin is.
- Control sheet ordering, fractional sheets and where settings are editedSet sheet ordering, the minimum free length for fractional sheets, and adjust these options from inside a project.
- Download and share the board layout and board summary PDFsTake the board layout and board summary PDFs from the footer and forward the layout to the factory or a manufacturer.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- Edit a work order board layout after generationChange a work order's board layout by hand after it has been generated instead of keeping it locked to the production design it came from.
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- Fix an oversized panel by splitting itSplit an oversized panel in the design portal so it fits the board and is included in the layout.
- Fix grain-direction rotation refusalsCorrect a wrong-running grain at the panel's grain declaration instead of rotating it on the sheet.
- How board layout groups panels into board typesLearn how a design's board layout groups panels into board types and proposes a least-waste layout.
- How fractional sheet settings split a sheetLearn how fractional sheet settings divide a sheet by a set fraction, such as a 250 mm fraction or a 50/50 split of the length.
- How grain flags on finishes control panel rotation in board layoutLearn how a panel's grain requirement comes from the grain flag on its finish and why a grained panel is not allowed to rotate in board layout.
- How stacking height limits stack count in board layoutLearn how the maximum stacking height setting in board layout / MES output determines how many boards fit in one stack.
- How the board-layout margin worksLearn what the board-layout margin defaults to, when it is applied and where you can change it.
- Inspect, move and discard panels in a design's Board LayoutClick a panel to see its Panel info, drag it to move it on the sheet, and use Discard Changes to put the layout back.
- Mark all panels of a cut sheet as tracked in bulk from board layoutMark every panel on a cut sheet as tracked in one action when the operator has not scanned each panel individually.
- Optimize board layouts for units automaticallyLet the software calculate board layouts and wastage for units such as vanities and wardrobes, with the option to adjust manually.
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- Read panel codes and labels on a board layoutEach panel on a board layout carries a panel code and a label, so the operator can paste the correct label on the correct panel after cutting.
- Regenerate board layout after turning off panelsTurn off all panels except the top and shutter panels, then regenerate the board layout so the shutter panels get their own separate layout.
- Set the cutting type and optimisation criteria for board layoutsChoose straight cuts or nesting, then tune recuts, optimisation criteria and stacking for the layout.
- Troubleshoot a stopped cutting job and read sticker codesCheck margins and saw width when a cutting job stops, and see how the sticker material code is built.
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- 切断計算における板の寸法と刃の厚さを理解する板の寸法には、既定で両側10 mmのトリミングが考慮されること、および刃の厚さは切断計算用に別途入力することを説明します。
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- カットリスト最適化の目標を選択します材料最小、加工時間最小、またはバランスから選択し、適用して最適化されたレイアウトを生成します。
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- Choose the optimisation criterion per sheet typePick a criterion for each sheet type, or apply one to all with the Overall row, then continue without recomputing.
- Choose the room and download scope for board layout filesOpen the board layout for one room and set the screen level that decides which panels a download covers.
- Clear an oversized panel violationClear an oversized panel violation either by splitting the panel to the available height or by entering the correct board dimensions in the board layout settings.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Enable minimum distance from edge for laminate border allowanceTurn on the minimum distance from edge setting so laminate border allowance is applied around the panel and set the maximum length of the smaller side in the same settings.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix grain-alignment violation by rotating finish 90 degrees at panel levelRotate the finish 90 degrees at panel level so the panel aligns itself to the vertical grain and the violation clears.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- ブレード厚がトリムマージンとは別に計上される方法ブレード（キルフ）厚がカット間に別の許容値として適用される方法と、残りの寸法がどのように扱われるかを説明します。
- Inspect a composite sheet and keep the board remainderOpen a composite sheet to see its core material and combined pieces, and keep the unused board remainder for other projects.
- Read the Optimization Statistics modal after a comparison runRun the layout with Decide after Comparison and read each sheet type's sheet count, processing time and offcut figures.
- レイアウトエラーのあるシートは再カット上限を1または2に下げるパネルの重なりやボード外へのはみ出しがあるシートを修正するには、そのシートのみ再カット上限を下げます。
- 端材をパネルとして追加して再利用する残った端材ボードをパネルまたはコードとして追加すると、後のプロジェクトで使用できます。
- Set board sizes, quantities and force useGive each board size its available sheet count and mark the sizes the optimizer must consume.
- カットリストの寸法を丸めるには、寸法精度を1 mmに設定します寸法精度を1 mmに設定すると、システムは計算された寸法を整数ミリメートルに丸め、意図したパネルサイズと一致させます。
- Set margins, blade thickness and saw widthSet the board margins and saw blade allowance so cutting jobs run with the right values.
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
- Edit Layoutで選択済みのパネルを配置しながらシートを切り替えるパンくずリストのシートメニューを開くと、ボードタイプのシート間を移動し、選択したパネルを選んだシートに配置できます。
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand optimization after a material changeLearn what happens to optimization when core or finish materials are changed in a design.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Understand why cut-list labels and board layouts show different sizesLearn why a cut-list label shows a size with decimals while the board layout shows rounded whole numbers.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- View a board's layout with labelsClick an individual board to see its layout with labels.
パネルラベルとステッカー35
- How panel labels and QR codes work in productionLearn what panel labels carry and how their QR codes drive CNC file lookup and order tracking.
- 出力ラベル、貼り付けレポート、組立ビュー現場向けのシートラベルとパネルラベル、貼り付けレポート、分解組立ビューを印刷します。
- Select the correct machine type when downloading panel labelsChoose the machine type that matches your CNC machine when downloading panel labels so the QR code starts the correct operations.
- Track work order progress by scanning panel label QR codesScan the QR code on a panel label to track a work order's progress through factory stations and mark completion at each scanned stage.
- Add separate QR codes for top and bottom programs on HOMAG CNC labelsGive a HOMAG CNC panel label separate QR codes for the top machining program and the bottom machining program.
- パネルラベルのバーコードは任意で、追跡に使用されますパネルラベルのバーコードは必須ではなく、追跡に使用されます。そのため、追跡が不要な場合はバーコード領域を削除し、ラベルのサイズを小さくできます。
すべて表示（35）
- How panel label defaults are setLearn the default panel label size and border the platform uses.
- Make panel labels visible in the design portalPublish the design so its panel labels for the cut list become visible, without opening the cut list.
- Read panel codes to identify carcass and unitPanel identifiers in production output make it easy to see which carcass a panel belongs to and which unit has to be cut, so a specific unit can be picked out quickly during cutting.
- マシンのパネルラベルの回転をオンにするマシンごとの設定を有効にすると、そのマシンの出力でパネルラベルが回転されます。
- Add edge band code, final size and material info to production labelsExtend production labels to show the edge band code, final panel size and internal and external material information.
- Choose which box label template a work order printsSet the default box label template for one work order so its labels print in the layout that client or project needs.
- Create a custom label template based on printer and sticker sizeCreate a custom label template, set your sticker size, choose the information fields to print, then update it and set it as default.
- Create, rename, update and default panel and box label templatesManage the org's panel and box label templates, from creating and customising them to setting the org-wide default.
- パネルラベルを製作出力としてダウンロードするパネルラベルは、ダウンロード可能な製作出力の一つとして生成されます。
- Enable loading order and premilling-by-side in sticker templateTurn on loading order and premilling by side in the sticker template so the sticker shows which side faces up and the premilling value per edge.
- Filter and report progress per operationCombine station and tracking-status filters and enable show detailed progress to see per-operation completion.
- ボックスラベルの組織ロゴが表示されない問題を修正するラベルを再生成するか、ロゴ設定とテンプレートレイヤーを確認して、ボックスラベルのプレビューと印刷PDFに組織ロゴが表示されるようにします。
- 組織ロゴと重複QRがパネルラベルで競合する場合の修正組織ロゴと重複パネルQRが同じパネルラベルに両方印刷できない理由と、ラベルのレイアウトおよびエクスポートで想定される動作について説明します。
- ボックス削除後に番号が飛ぶ問題を修正するボックスを削除するとそのパネルは未梱包プールに戻ります。その後、注釈を再割り当てして残りのボックスを連番に改名します。
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Fix user component annotation labels that cannot be changedUser component annotations are auto-labelled, so their labels cannot be edited.
- パネルラベルを自動的に生成して印刷するラベルのレイアウトを設定し、含めるパネルデータを選択してから、ボードレイアウトの機能でラベルをダウンロードして印刷します。
- How panel stickers carry a CNC barcode alongside the scan QR codeLearn how the panel sticker can carry a barcode for the CNC machine in addition to the QR code used for scan tracking, and how a setting switches the machine-file field between a barcode and a QR code.
- シートラベルの仕組み各シートがシート全体の順序の中でどのように独自のラベルを取得するかを説明します。
- デザインポータルで公開するとパネルラベルが表示されるようにするデザインポータルでデザインを公開すると、パネルラベルが表示されます。
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Read edge band thickness on the panel labelThe panel label prints the edge band thickness as a number on the side of the diagram where that banding applies, so shop-floor staff see it at a glance.
- Read the external and internal finish on a panel labelOpen the panel label to see which side of a panel carries the external finish and which carries the internal finish.
- Save label printing format files to drive for automatic retrievalLabel creation requires cut sizes, finish sizes, operations, edge banding thickness, and panel indicators.
- Scan panel labels to detect the correct CNC filePanel labels include a barcode that a CNC machine scans to detect the correct file for that panel.
- Show edgeband face grooving on panel labelsShow grooving information on panel labels in addition to the board layout view.
- ボックスのラベルに組織のロゴを表示し、その位置を選択するボックスのラベルテンプレートで組織のロゴをオンにし、その表示位置を選択します。使用されるロゴと、ページをまたいだ動作を確認してください。
- Understand offcut management in productionLearn that offcut management is not currently available in production and that labels are generated only for panels accounted for in a project.
- Update the sticker template after changing sticker settingsLearn how the sticker template controls which information appears on the sticker and can be switched on or off per field.
CNCとCAMの操作65
- パネルに切り欠きを追加し、CNC用の加工タイプと工具を割り当てるパネルの外面に窪みを作成し、切削深さと加工タイプを設定して、CNC出力で使用できるようにします。
- CAM出力で背板溝が表示される条件を理解するインセット背板が周囲のパネルに溝加工を生成する仕組みと、その溝がCAM/MES出力に届くかどうか、またその方法を決める設定とマシン設定について説明します。
- CAMでインクルードをマークして、CAMオペレーションを追加します。タイプ、深さ、ツールを指定します。デザインフィーチャーをCAMでインクルードとしてマークし、カットタイプ、深さ、優先ツールを設定して、マシンに送信します。
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- Cut a curved or arched panel from a final-size panelStart with a panel already at its final dimensions and cut the curve out of it to produce a curved or arched panel.
- CIX出力のBiesse Works互換性を有効にするマシン設定でBiesse Works互換性をオンにすると、お使いのBiesse CNCマシンが生成されたCIX出力を正しく読み取れます。
すべて表示（65）
- CAM操作におけるトリミングとポケット加工トリミングは領域全体にわたって材料を除去し、ポケット加工は外周の内側に定義された空間を掘り込む仕組みを学びます。
- 出力をダウンロードする前にCNCマシンの種類とツールデータを設定する穴あけ面に応じてマシンの種類を設定し、ルーティングツールとソーツールを追加してから、保存してCNC出力をダウンロードします。
- Force a tool and finish adding a CNC machineMap drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- Set routing line tool position L, R or C for cut alignmentClick a routing line to see the tool position with L, R and C options, specify a preferred tool, and check the panel preview by selecting the machine instead of raw view.
- Create custom cuts in edit panel design and include them in CAMDraw and offset a custom shape on a panel, define it as a cut with a depth, and enable the include in CAM option so the machining reaches the CNC files.
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Enable Include in CAM to push panel operations to productionTurn on Include in CAM when adding a panel operation so it reaches production, then choose the operation type, tool and tool number.
- Enter saw tool name, thickness and axis for back-panel groovingAdd a saw tool row in the CNC machine settings so back-panel grooving operations carry the right tool name, thickness and axis.
- 優先ツールの選択がマシンビットにどのように対応するか2D CAMモードでカットに選択した優先ツールが、どのマシンビットで実行されるかを決める仕組みを学びます。
- Set back panel grooving methodChoose whether back panel grooves are cut by sawing or routing.
- Set the preferred router tool for back panel groovesSet the default router tool for the Back Panel Groove operation in a CNC machine's settings, choosing from tools identified by name, diameter and axis.
- 設定でCNCマシンを追加してドリル加工ファイルをダウンロードする設定 > マシンでCNCマシンを追加すると、ドリル加工ファイルとDXFをダウンロードできます。
- Add CNC tools that match the machineEnter every tool the job uses with names and numbers that match the machine so CNC output can be matched and downloaded.
- Check a tool's type in machine settingsLook up the type assigned to each tool in machine settings to see why a routing tool cannot be listed as a sawing tool.
- Configure CNC machine as 5-face process with panel flipEnter only the saw tool details, including the tool name and thickness, in the machine settings.
- ドリル加工面数によるCNCマシンタイプの設定CNCマシン設定で、マシンがドリル加工する面数に合わせてマシンタイプを設定します。
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- パネルにパラメトリックなポケットとドッグボーンカットアウトを作成するパネル面にポケットを機械加工し、パラメトリックにサイズを設定します。ドッグボーンおよび水平カットアウトにはルーティングを使用します。
- CAM設定の溝深さ公差がカットリストの溝精度をどのように制御するかパネルの2D/CAMビューに表示される溝深さに、システムが追加する公差が含まれる仕組みと、その設定場所について説明します。
- Include side panel cuts in CAM outputInclude the panel cuts on the sides of a cabinet in the CAM output.
- Machine radius panels and grooving by editing panel constructionEdit the panel design at the construction level and apply the required tools and operations so the application generates the machine instructions automatically.
- Output top and bottom drilling in one CNC fileTurn off the Separate Top Bottom Files setting on a CNC machine so it outputs a single file containing both top and bottom drilling.
- Restrict a panel area from grooving or drilling via clamping obstructionDefine a restricted rectangular area on a panel in the Clamping Obstructions table so the software rotates the panel when a groove or drilling operation falls inside it.
- Set up a CNC machine with its machine type and settingsUse the Add Machine option and fill in the machine type and the settings the setup stores per machine.
- CNC出力でパネルが回転される（またはされない）理由Always Rotate設定、Maximum Machine Depth、Min Panel WidthがCNC出力でパネルを回転するかどうかをどう決めるか、また穴あけが反転したり誤った端に来たりしたときに何を確認するかを説明します。
- 2D Panel CAM Modeでドリルを追加および編集する2D Panel CAM Modeでパネルにドリルを追加し、その位置、ステップ、マシン深さ設定を編集します。
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- マシンの側面ソー工具リストにソーブレード工具の行を追加するマシンでソーイング作業を実行できるようにするには、ソーブレード工具の行を名前と刃の厚さとともに追加します。
- Back panel grooves cut end-to-end in generated MPR filesLearn how back-panel grooves defined end-to-end in the design carry through to the generated MPR file and match the drawings on the MES portal.
- Check CAM hole depth in panel 2D CAM modeOpen the panel in 2D view and enter CAM mode to verify hole markings such as drawer channel or tandem depths.
- 図面をダウンロードする際のクランプ領域の警告を確認するワークオーダーの図面またはマシンファイルをダウンロードし、制限されたクランプ領域内にあるオペレーションを確認します。
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose a panel cutting strategy for CNC productionUse the panel-by-panel strategy for CNC cutting and avoid the single-step strategy when two panels are involved.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- Download and check CNC machine files before productionDownload the CNC output from the published work order, load it into the machine and verify it against the machine type.
- Download CNC machine output drawingsDownload drawings from the CNC machine output that show every panel with its machining details, using reference letters A, B, C and D to determine positions and depth.
- Draw the path before exiting to 3D view for the sweep toolDraw the sweep path before you exit to the 3D view, because the sweep cannot be applied without a defined path.
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Find the download buttons on a work order's CNC Machining tabLocate the Drawing and Machine Files buttons on each machine card and know which formats each machine offers.
- CAMの溝長さ許容差を調整して溝が正しく切削されない問題を修正する管理側のCAM設定で溝長さ許容差をビット直径の半分に設定すると、製作ファイルで溝が正しく出力されます。
- Fix missing routing or drill tools in CAM outputAdd the referenced tools and refresh the cache so regenerated CAM output includes every tool the job uses.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- CNC出力の生成時にツールが異なる可能性があるという警告を処理するCNC出力の生成時に"tool may be different"警告が表示される理由と、誤ったツールが選択された場合にツールマッピングの設定を修正する方法について説明します。
- Infurniaの.nc Gコードの制限：R円弧、カッター補正なし、mm絶対値Infurniaの小さなGコード方言の固定ルールを学び、.nc出力がコントローラー上で何を表現でき、何を表現できないかを把握しましょう。
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- ストリップライトの溝深さの設定と確認方法ストリップライトSKUの溝深さが、パネルに溝を切るかどうか、切る場合はその深さをどう決めるか、またCAM出力で結果を確認する方法を説明します。
- Biesse CIXファイルでORLST原点がどのように選択されるかInfurniaが各パネルのORLSTベッド原点を、Default Machine Originまたは範囲ベースの原点テーブルからどのように選択するかを説明します。
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- ソー幅を機械の刃幅に合わせるワークオーダーのソー幅を切断機の実際の刃幅に設定し、ソーファイルを再生成して板取りが正しくなるようにします。
- ユニット近接（C1、C2、C3）でCNCファイルに名前を付けるバーコード内のCNCファイルに名前を付ける際は、C1、C2、C3などのユニット近接ラベルを使用し、プロジェクト間で同じ命名の考え方を維持してください。
- 特大のBiesseパネルに対して、原点ごとに最大マシン深さを上書きする特定の原点行に独自のより深い最大マシン深さを設定すると、特大パネルはその原点でのみ受け入れられます。
- Set onion-skin passes and through-cut ordering in nesting NC programsControl whether through-cuts are machined in one pass or two, and know that they always run last in the program.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- マシンがデフォルトを拒否する場合は、代替のMPR形式を試してくださいマシンがプラットフォームのMPRを正しく読み取れない場合は、サポートされている他のMPRバリアントを試し、マシンベンダーから動作確認済みのサンプルファイルを入手してください。
- Panel 2D CAMの編集が製造出力に与える影響を理解するPanel 2D CAMモードで製造用に追加できる内容と、その変更が3D設計に反映されない理由を説明します。
- Verify a nesting program with toolpaths and the NC simulatorOpen the nesting view on a single sheet to check raw or post-processed toolpaths, simulate the NC code and spot missing tools.
- CAM設定が必須項目エラーで保存できない理由CAM設定モーダルが保存を許可する前に、入力内容をどのように検証するかを説明します。
- .ncファイルのZ値が設定したSafe Zと一致しない理由Z Origin Reference設定と貫通カットのクリアランスが、.ncファイルに書き込まれるZ値をどのように変化させるかを確認し、正しいファイルと実際の深さエラーを区別できるようにします。
素材、金物、コネクタ49
- How connectors are assigned per scenarioLearn what a scenario is in connector setup and how it decides which connector is applied to a joint.
- Reduce a single panel's length using panel-level extensionShorten one specific panel by setting a negative extension on it at panel level in a construction style.
- Verify a completed design in QC modeOpen QC mode to see the materials, units and panels used in a completed design before verification.
- Add a connector to several units at onceAdd one connector to many units in a single pass by selecting the scenarios that need it in the Scenario view tab.
- Find and replace a material or edge band in QC ModeTrace which units and panels use a SKU and swap it for another across the design.
- Apply full or half overlay to selected scenarios before adding a connectorApply full or half overlay edits across all current scenarios in the design before adding a connector.
すべて表示（49）
- Change edge bands in bulk from the production sectionChange the edge band on a line item in the production section and the change applies to every instance of that line item at once.
- Create a new construction style and add all reductionsCreate a new construction style or reuse an existing one, then add all the required reductions including the bottom reduction.
- Inspect units and panels in the QC Mode tabsRead the Units and Panels tabs to see annotations, rooms and where each material came from.
- Read a design's Raw Material Lists and Cabinet Composite BOQLearn what each Raw Material Lists tab and the Cabinet Composite BOQ show, and how to compare lists by item name rather than Sno.
- Read a panel's machining and edge-band drawing in 2D Panel CAM ModeOpen a panel's 2D Panel CAM Mode to see its hinge cups, drill and contour legends, edge-band labels and view options.
- Use X-ray mode to verify drilling before publishingSwitch the production view to X-ray mode to check drilling details on a single component or the whole cabinet, then click X-ray again to return to the solid view.
- Automate connector counts with rulesTell the software how to handle connectors for a given connection so connectors are added by rule.
- Change drawer bottom and carcass panel material at panel levelChange the core material of a drawer bottom panel or other drawer carcass panels by editing the material at the individual panel level in the production portal.
- Correct wrong materials and push the change to productionFix excess or wrong material types in the design and re-sync the work order so production picks it up.
- Inspect assemblies with exploded view, X-ray mode and panel hidingShow an exploded view with an adjustable explode percentage, toggle X-ray mode to see through parts, and turn off individual panels to inspect internal structure.
- Manage connectors on ticked scenarios from the Actions menuPick a connector and apply it to the ticked scenarios, and use a connector card's three-dot menu for Publish, Filter for this, Replace and Remove.
- Replace a connector in the connector card in manufacturing settingsUpdate the connector in the connector card within manufacturing settings so production output uses the changed hardware connector, then confirm it appears correctly in the design.
- 置換と選択のルールを使用してコネクタを置き換えるあるコネクタの種類を別の種類に置き換え、置き換えられたコネクタの数を確認します。
- Replace unwanted hardware in manufacturing settingsConfigure the correct replacement hardware so the unwanted item no longer appears in the output.
- Review board layout settings on the MES portalReview board layout settings on the MES portal.
- Tell how many of each item is requiredUse the material and hardware summary to see how many of each item a design requires.
- ワードローブ構築設定で背面幅木をオフにするワードローブ構築設定で背面幅木をオフにすると、カットリストに表示されなくなります。
- Understand the sliding wardrobe shutter system propertyLearn what the shutter system property controls in a sliding wardrobe.
- Verify connector placement and run a collision checkCheck that connectors are placed correctly and run a collision check.
- Visualise cabinet assembly with exploded viewsCreate exploded views to see how a cabinet goes together, then refresh admin settings to update columns and generate the CNC zip for machine upload.
- Visualise multi-finish shutters in the designSee how multi-finish on shutters can be visualised in the design.
- Add a finish condition to a panel glue manufacturing ruleAdd a finish condition to a panel glue manufacturing rule by setting the condition type to finish and choosing the tag operator 'equal to'.
- Add hardware to a box and handle closed-box warningsSelect hardware with an unpacked remainder, enter a valid quantity, and reopen a closed box if the warning appears.
- Add stability rails to wardrobes wider than 900 mmAdd stability rails as an option when a wardrobe is wider than 900 mm.
- Change material for specific panels using filter parametersFilter the panels in the finished materials view so a material change applies only to the units that match your criteria.
- Check and bulk-change core material by filteringFilter the materials view by core material to spot a wrong ply and swap it in bulk.
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Check where a panel's hardware came fromRead the connector source in the connector scenario view to tell whether a panel's hardware was inserted by a hardware rule or placed by hand.
- Define connector height ranges with an infinity upper boundDefine multiple bands for a connector's height range, including a final band with an infinity upper bound.
- Define custom LED strip sizes in the admin portalDefine any custom LED strip sizes in the admin portal so they are available for LED grooves in CNC output.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- Machine files do not output two separate groups for split shuttersWhen a shutter is split into two parts using a divisional shutter, the design and 3D view show two separate panels.
- Reproduce rejected panels using rejection recordsUse the rejection record kept for a rejected panel to reproduce it when remanufacturing.
- 本番コネクタとシナリオを使用して削除されたハードウェアを復元する本番デザインでデザインを開き、3Dとコネクタとシナリオに移動し、カタログからプレーンガラスなどの素材を再割り当てして、削除されたハードウェアを復元します。
- Set dummy panel depth to 0 mm to fix Gola cut on blind unitsSet the dummy panel depth to 0 mm so the Gola cut and shelf reveal on a blind unit come out right.
- Track edge banding, core material and finish in panel schedulesCreate and download panel schedules as CSV to track edge banding, core materials and finishes and spot panels with discrepancies.
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand the Modular Units Hardware tabSee what the Hardware tab lists for each cabinet, how rows are grouped, and how to check panel drilling details.
- Understand the two hardware lists for procurement and assemblyLearn how the procurement hardware list and the assembly hardware list differ and which one the assembly team should use.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- Verify a cabinet before sending it to productionCheck a cabinet's SKU structure against the rules before you send it to production.
- Work out strip light drivers and screws manuallyPlace strip lights manually in the drawing so the running length is known, then work out the correct driver rating and screw quantities separately.
- Work with connectors and scenarios in single unit CAM modeOpen a cabinet's CAM menu in the production design to reach Single unit CAM Mode (Panel by Panel), Connectors and Scenarios, then manage each scenario of the selected panel.
パネル追跡とステーション37
- Open QC Mode and understand its tabs and work scopeEnter QC Mode, see which work scope it opens on, and learn what each of the four tabs shows.
- Track scanned panel progress in a work orderSee the progress of any scanned panel inside a work order, with green ticks for panels scanned at a station and panel-by-panel status within a project.
- Grant MES roles per user and load mapped stationsTurn on MES roles for individual users without admin rights and reload so mapped station data appears.
- Reject and remake a panel from the manual tableReject a panel and remake it, then regenerate the remake's outputs from the Rejections tab.
- Set up stations and operators for panel trackingStart tracking with one person at a chosen station and add stations and operators as work progresses.
- Understand exempt panels at edgebanding and CNC stationsLearn why some panels are not trackable at edgebanding and CNC stations and where they appear.
すべて表示（37）
- Understand Shipment page tabs and station permissionsLearn how the Shipment page's Loading and Unloading tabs depend on the stations mapped to you and what each view requires before you scan boxes.
- Add missing stations and print panel labelsReview the default stations for a new account, add any missing station from station settings, and print panel labels.
- Check per-panel station status on Order ProgressOpen the Order Progress tab to see each panel turn green as it passes each station.
- Create a custom-named station on a standard typeAdd a station by naming it and choosing one of the existing station types.
- Create MES users and stations with the right roles and typesSet up MES admins, MES operators and stations so tracking access can be assigned correctly.
- Deactivate tracking stations a factory does not scan atDeactivate any tracking station your factory does not want to scan at, and station types with no active station are left out of progress calculations.
- Filter tracking data by station status and download the listNarrow production tracking to panels by station status, then download the filtered list.
- 誤ったステーションタイプで作成されたステーションを修正するステーションのタイプは作成時に固定され、編集できません。正しいタイプの代替ステーションを作成し、オペレーターを移動して、古いステーションをオフにしてください。
- Get an alert when a panel has already been scannedScan panels on the mobile app and the system alerts you when the same panel has already been scanned.
- Handle rejected panels: retired codes, remakes and undoLearn how a rejected panel's code is retired, how the panel is remade with a fresh code, and when a rejection can still be undone.
- 未着手パネル数の計算方法生産追跡において未着手数に含まれるパネルと、その数が変わるタイミングについて説明します。
- 生産ポータルが現場での品質管理をどのように支援するか生産ポータルが、元の設計を変更せずに品質管理チェックと機械で使用できる出力をどのように表示するかをご覧ください。
- How tracking records and statuses are storedLearn what each scan records, which tracking sources exist, and what item status shows.
- Map users to tracking stations and fix missing usersGive each MES user access to the stations they work at and understand why a user may not appear in the Operators list.
- Pick the station and scan panel labels on the phoneChoose the station on the phone before scanning, and only scan the panel's own label so the code is accepted.
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- Read tracked-panel counts per stationSee why counts differ between Panel Cutting, Edgebanding and CNC, and what a lower count at a later station means.
- Route projects to a factory or vendorConfigure machines per factory or vendor and route a project to the chosen one.
- Scan a panel QR to track it at a stationPoint the scanner at a valid panel label to mark the panel tracked at the currently selected station.
- Scan panels with a Bluetooth scanner or camera modeUse a slow-typing Bluetooth scanner or switch to camera mode, which shows each scan result as a self-clearing sheet on touch devices.
- Scan panels with a camera or hardware scannerUse the camera-based tracker at each station and know that every scan records its source.
- 管理ポータルとMESポータルでユーザーごとのアクセスを設定する管理ポータルとMESポータルの両方で権限を設定し、各ユーザーに適切なアクセスレベルとMESロールを付与します。
- Set up an MES operator for tracking station scanningCreate the MES operator as a user in the admin portal with their email ID and map them to a tracking station before scanning can be used.
- Set up factory-floor tracking from workflow to first scanPlan your stations, create operators, assign them to stations and start scanning on Android devices.
- 追跡ステーションを削除する代わりにオフにするSettings > Configure stations で追跡ステーションをオフにすると、オペレーターのステーション選択画面から表示されなくなり、追跡中のパネルは履歴を保持します。
- Track panels manually from the Manual tableOpen the Manual table, pick a published work order and track the panels you need at the station.
- Track panels with a phone camera or the Manual viewUse a phone camera or pick panels in the Manual view when no hardware scanner is at hand.
- Understand station-scan gating and scan orderLearn that gating is all-or-nothing and that scanning out of sequence is not blocked.
- Understand the nine station types and how panels are trackedLearn which station types are scan stages, which are box-based, and how default and extra stations behave as one stage.
- Understand where scan summaries are shownLearn that the platform shows a browser summary of which panel was scanned at which station and at what time.
- QRスキャンが無視され、'Scan ignored'トーストが表示される理由アプリがスキャンを受け付けずに'Scan ignored — <reason>'トーストを表示する理由と、TrackingページおよびShipmentページでの各理由の意味について説明します。
梱包と出荷24
- Create a box manually on the Packaging pageCreate a box manually on the Packaging page so the factory floor gets a packaging list to pack panels and box labels can be printed before packing.
- ボックスを作成し、ラベルを印刷して、梱包のために閉じます生産インターフェースでボックスを作成し、パネルを追加してから、ラベルを印刷して閉じることで、切断済みパネルを梱包します。
- How the Shipment/Order Status counts are derivedLearn how boxes, panels and hardware each count towards shipment progress on the Order Status page.
- 梱包カウンターの確認と、箱ラベル・リストのダウンロードPackaging ページのヘッダーで梱包済みのパネルとハードウェアを確認し、Box Labels、Packaging List、Unpacked Panels を PDF でダウンロードできます。
- Read the Shipment Loading view and open the Shipment SummarySee the selected shipment's status, loaded and pending boxes, and the actions available, then open its full Shipment Summary.
- Add panels to a box and print its label on the MES Packaging pageTick panels in the Manual panel selector, confirm adding them to a box, and print the box label to close it.
すべて表示（24）
- Add panels to a box with the Manual panel selectorFall back to the Manual panel selector to filter panels by core, finishes, edge bands and operations and place them without scanning.
- 画面右側のボタンから梱包箱を作成しますPackagingページで作業指示書の新しい箱を作成し、そのラベルを印刷して箱を閉じると梱包が完了します。
- Create a shipment for a work orderOpen the Shipment section for the work order, create the shipment with driver, vehicle, dispatch and receiver details, then scan box labels to mark them loaded.
- 出荷用の箱を作成し、ラベルをスキャンして出荷詳細を入力します梱包用の新しい箱を作成し、すべてのパネルが追跡されていることを確認してから、箱のラベルをスキャンし、出荷に必要な受取人、ドライバー、車両の詳細を入力します。
- Enable the packaging page and map operators to a Packaging stationPublish the work order and map each operator to a tracking station of type Packaging so the page is active.
- Fix packaging scans that are ignoredOpen a box and clear the invalid-QR popup so the packaging scan listener accepts your scans.
- Fix "Panel is already in Box" errors and move panels between boxesLearn why a panel can sit in only one box, what the error means, and how to move a panel to a different box.
- Handle invalid codes and duplicate or closed-box scansRead the reason for an invalid code, pick the panel manually, and confirm before adding to a closed box.
- Load and unload boxes on the Shipment pageScan box QR codes to load and unload boxes, use the tabs and unload list, and revert actions without losing track of records.
- ボックスのラベルをスキャンして出荷用のボックスを積み込みます携帯電話でログインし、ボックスのラベルをスキャンして配送用の品目を積み込みます。まだ積み込む必要があるボックスと、各ボックスの内容を確認できます。
- 箱ラベルを印刷して箱を閉じる、または印刷されなかったラベルを修正するPackaging から箱ラベルを印刷するか、ラベルなしで箱を閉じます。ラベルが見つからない、または古い理由も確認できます。
- Print labels and close boxes for the project stepDownload the labels and packaging listings, then print each box label and close the box until all boxes are done.
- Print or save the Shipment Summary for the driverOpen the Shipment Summary from the Shipment page and print it directly or save it as a PDF to send to the driver.
- モバイルアプリで箱をスキャンし、出荷概要を表示する箱をスキャンして積み込み済みかどうかを確認し、モバイルアプリケーションで出荷概要を開きます。
- Track packaging and shipment in order progressUse order progress to track packaging and shipment so you can trace components missing during shipment.
- プロジェクトの梱包リストで梱包状況を追跡する各プロジェクトに梱包リストを作成すると、システムはまだ梱包されていない品目を表示します。
- Track unpacked hardware while packing boxesUse the unpacked items list and remove hardware to return its quantity to the unpacked pool.
- Undo tracking and acknowledge a Panel Not Required alertUndo a tracking in one click from the success message or acknowledge the Panel Not Required alert.