Production
ଗାଇଡ୍: 480 · ବିଭାଗ: 10
ଉତ୍ପାଦନ ସେଟଅପ ଏବଂ ୱାର୍କଫ୍ଲୋ53
- Lock the design to prevent clashes between design and production editsLock the design when a designer and a production person may edit it at the same time, so the designer cannot make changes until the admin or design head unlocks it.
- ସମାନ ଡିଜାଇନ୍ ସେୟାର କରନ୍ତୁ କିମ୍ବା ଏକ ପ୍ରୋଡକ୍ସନ୍ ଡିଜାଇନ୍ କପି ତିଆରି କରନ୍ତୁସମାନ ଡିଜାଇନ୍ ସେୟାର କରିବେ କି ଯାହା ଦ୍ୱାରା ସମ୍ପାଦନା ସ୍ୱୟଂଚାଳିତ ଭାବେ ସିଙ୍କ୍ ହେବ, ନା ଏକ ସ୍ୱାଧୀନ ପ୍ରୋଡକ୍ସନ୍ ଡିଜାଇନ୍ କପି ତିଆରି କରିବେ ତାହା ନିର୍ଣ୍ଣୟ କରନ୍ତୁ।
- Choose copy or share when sending a design to productionDecide whether to create a production design copy or share the same design when sending a design to production.
- Send a design from the design portal to productionCreate the design and drawings in the design portal, then hand it to the production portal for checking before it reaches the shop floor.
- ପ୍ରୋଡକ୍ସନ ଡିଜାଇନ୍ରେ ସେୟାର କରାଯାଇଥିବା ଡିଜାଇନ୍ଗୁଡ଼ିକ କିପରି ଦେଖାଯାଏ ତାହା ବୁଝନ୍ତୁShare Same Design ସହିତ ପଠାଯାଇଥିବା ଏକ ଡିଜାଇନ୍ ଡିଜାଇନ୍ ପୋର୍ଟାଲର Production Designs ରେ କିପରି ଦେଖାଯାଏ ଏବଂ ଏହା କିପରି ଏହାର ଡିଜାଇନ୍ ସହିତ ସଂଯୁକ୍ତ ରହେ ତାହା ଜାଣନ୍ତୁ।
- ଡିଜାଇନ ପୋର୍ଟାଲରୁ ଉତ୍ପାଦନ QC ଏବଂ MES ପର୍ଯ୍ୟନ୍ତ ଡିଜାଇନ କିପରି ଯାଏଏକ ପ୍ରୋଜେକ୍ଟକୁ ଡିଜାଇନ ପୋର୍ଟାଲରୁ ଉତ୍ପାଦନ ଦଳର QC ଯାଞ୍ଚ ଦେଇ MES ପୋର୍ଟାଲ ପର୍ଯ୍ୟନ୍ତ ଅନୁସରଣ କରନ୍ତୁ, ଯେଉଁଠାରେ ଏହାର ଆଉଟପୁଟ ଉପଲବ୍ଧ ହୁଏ।
ସବୁ ଦେଖାନ୍ତୁ (53)
- Publish a work order so it appears in the MES portalPublish or republish a design so its work order becomes available to the factory team in the MES portal.
- Create a production design in copy modeCreate a production design in copy mode instead of share mode.
- ଏକ କାର୍ଯ୍ୟ ପରିସର ସୃଷ୍ଟି କରନ୍ତୁ ଏବଂ ଉତ୍ପାଦନ ଡିଜାଇନ ପୋର୍ଟାଲରେ କଟ ତାଲିକା ପ୍ରବେଶ କରନ୍ତୁଏକ ନିର୍ଦ୍ଦିଷ୍ଟ କ୍ଷେତ୍ର ପାଇଁ ଏକ କାର୍ଯ୍ୟ ପରିସର ସୃଷ୍ଟି କରନ୍ତୁ ଯାହାଦ୍ୱାରା ଆପଣ ଏହାର କଟ ତାଲିକା ସୃଷ୍ଟି କରିପାରିବେ ଏବଂ କଞ୍ଚାମାଲ ବିଲ ଅଫ ମ୍ୟାଟେରିଆଲ୍ସରେ ପହଞ୍ଚିପାରିବେ।
- How the production workflow runs from design to work orderFollow how a finalised design moves through production and into the work order, carrying its materials with it.
- How work orders are created and republished from design filesLearn how each design file sent to production becomes its own work order, how updates republish it, and why components stay together.
- Publish a production design as a work orderApply the hardware and connector selections on the production design, then publish it as a work order.
- କାଟାଲଗ ପରିବର୍ତ୍ତନ ପରେ ଆଉଟପୁଟ କ୍ୟାଚେ ରିଫ୍ରେସ କରନ୍ତୁ ଏବଂ ପୁନଃସିଙ୍କ କରନ୍ତୁଫିନିଶ କିମ୍ବା କୋର ମ୍ୟାଟେରିଆଲ ସେଟିଂସ ବଦଳାଇବା ପରେ, ଆଉଟପୁଟ କ୍ୟାଚେ ରିଫ୍ରେସ କରନ୍ତୁ ଯାହାଫଳରେ ଅପଡେଟ ହୋଇଥିବା ଗ୍ରେନ ଏବଂ ମ୍ୟାଟେରିଆଲ ଗୁଣଧର୍ମ କଟ ଲିଷ୍ଟ ଏବଂ ବୋର୍ଡ ଲେଆଉଟକୁ ପହଞ୍ଚେ।
- Access production design from the main appReach production design from the main app rather than a separate production-design subdomain or portal.
- କାର୍ଯ୍ୟ ସ୍କୋପ ସହିତ ଏକାଧିକ ରୁମକୁ ଏକ ୱାର୍କ ଅର୍ଡରରେ ବ୍ୟାଚ୍ କରନ୍ତୁଅନେକ ରୁମକୁ ଏକ ଉତ୍ପାଦନ ରନ୍ରେ ଏକତ୍ର କରିବା କିମ୍ବା ସେଗୁଡ଼ିକୁ ଅଲଗା ୱାର୍କ ଅର୍ଡରରେ ବିଭକ୍ତ କରିବା ପାଇଁ କାର୍ଯ୍ୟ ସ୍କୋପ ବ୍ୟବହାର କରନ୍ତୁ।
- Edit channels in production design without returning to designCorrect a channel directly in the production design module after a design has been sent to production, without going back to the design module.
- Edit connector and construction changes through production designSend the design to production from Outputs, create a new production and open the production design so you can review and modify connector scenarios there.
- ଡିଜାଇନରୁ କଟ୍ ଲିଷ୍ଟ ଏବଂ ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ ସୃଷ୍ଟି କରନ୍ତୁଗୋଟିଏ ପ୍ରବାହରେ ଡିଜାଇନରୁ ଉତ୍ପାଦନ ପର୍ଯ୍ୟନ୍ତ ଯାଆନ୍ତୁ, ଅଲଗା 2D CAD ଚିତ୍ର ପରିବର୍ତ୍ତେ ମଡେଲରୁ କଟ୍ ଲିଷ୍ଟ, ହାର୍ଡୱେର ଲିଷ୍ଟ ଏବଂ ଇନଷ୍ଟଲେସନ ଗାଇଡ ସୃଷ୍ଟି କରନ୍ତୁ।
- Publish a checked cut list to a work orderPublish a confirmed cut list so you can download the work order and get the final cutting list and machine outputs.
- Publish a job to the MES portalPublish the job to the MES portal from the production design portal so it reaches production.
- Republish a design so the work order cut list is up to dateMake or verify a change in the production design and republish it so the work order cut list picks up the updated values.
- ଏକ ଉତ୍ପାଦନ ଡିଜାଇନକୁ ଏହାର ଉତ୍ସ ଡିଜାଇନରୁ ପୁନଃସିଙ୍କ କରନ୍ତୁୟୁନିଟଗୁଡ଼ିକୁ ଯୋଡ଼ିବା, ବିଲୋପ କରିବା ଏବଂ ସଂଶୋଧନ କରିବା ପାଇଁ ଏକ ଉତ୍ପାଦନ ଡିଜାଇନକୁ ଏହାର ଉତ୍ସ ଡିଜାଇନରୁ ପୁନଃସିଙ୍କ କରନ୍ତୁ, ନିଶ୍ଚିତ କରିବା ପୂର୍ବରୁ ପ୍ରଭାବ ସମୀକ୍ଷା କରନ୍ତୁ।
- Understand what a workscope is in Production > Work ScopesLearn what a workscope covers and how separate workscopes are set up for the outputs you need.
- Update and resync a design to push it to productionUpdate the design and use the resync feature to push it to production.
- Verify materials with QC and create a work orderCheck that core, finished and edge band materials are correctly applied, then create a work order and download its outputs.
- Add machines after publishing and refresh the machine listAdd a beam-saw or CNC machine in Settings > Machines and make it appear on the published work order without republishing.
- Choose which stages a job usesDecide which station types contribute to progress and leave out Packaging and Shipment for smaller jobs.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Download technical documentation summary from production portal after transferGet a technical documentation summary covering part codes, dimensions, materials, finishes and edge band specifications after transferring a project to production.
- Find CAM mode in Infurnia Production, not DesignLearn where CAM mode is available and why cabinets no longer show it while you work in the Design module.
- Find your way around a production design copy's Production tabOpen a production design copy and use the Production tab toolbar and the Differences between work order and design dialog to compare the work order with the design.
- How work order numbers are assignedLearn that the work order number shown in the project is assigned by Infurnia and cannot be edited by the user.
- Limit a scenario change to the current designScope a construction or CAM scenario change to the current design instead of applying it globally.
- Pack panels into boxes and ship themScan panels into a box on the Packaging page, then complete shipment by scanning the box.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Publish a work order to unlock downloadsPublish the work order so its downloads become available and an immutable published design version is created.
- ମେସିନ୍ ଆଉଟପୁଟ୍ ସୃଷ୍ଟି କରିବା ପୂର୍ବରୁ ଆଡମିନଙ୍କଠାରୁ CAM ସେଟିଂସ୍ ରିଫ୍ରେସ୍ କରନ୍ତୁସର୍ବଶେଷ ଆଡମିନ-କନଫିଗର୍ ହୋଇଥିବା CAM ସେଟିଂସ୍ ଆଣନ୍ତୁ ଏବଂ ସେଗୁଡ଼ିକୁ ଲାଗୁ କରନ୍ତୁ, ଯାହାଫଳରେ ଆପଣଙ୍କ ମେସିନ୍ ଆଉଟପୁଟ୍ ଉଲ୍ଲଂଘନ ବିନା ଡାଉନଲୋଡ୍ ହେବ।
- Refresh cutlist settings from Admin and republishPull the latest cutlist settings from the Admin portal and republish the design so updated production files can be downloaded.
- ଆଉଟପୁଟ ଡାଉନଲୋଡ କରିବା ପୂର୍ବରୁ ଆଡମିନରୁ ସେଟିଂସ ରିଫ୍ରେସ କରି ଲାଗୁ କରନ୍ତୁସର୍ବାଧୁନିକ ଆଡମିନ ସେଟିଂସ ରିଫ୍ରେସ କରନ୍ତୁ, ସେଗୁଡ଼ିକୁ ଲାଗୁ କରନ୍ତୁ, ତାପରେ ଆଉଟପୁଟ ଫାଇଲଗୁଡ଼ିକ ଡାଉନଲୋଡ କରି ଆଉଟପୁଟରେ କୌଣସି ବଡ଼ ସମସ୍ୟା ନାହିଁ ବୋଲି ନିଶ୍ଚିତ କରନ୍ତୁ।
- Resize a unit without breaking MES calculationsChange a unit's dimensions in the design and its production calculations follow the updated size, because it stays the same unit.
- Review a design before MES releaseA production manager reviews the design and can change values such as premilling before it is released to MES.
- Review designs in the production design portal before a work orderBefore a work order is created, use the production design portal to review the design construction-wise.
- Review what changed and when in production design versionsOpen the Versions & History dialog in the production design to see each change with its action, timeline and user, so you can review what was changed on a given day.
- Send a design to production from the homepageOpen the three-dashes menu on the homepage and choose Send to Production to send your design to production.
- Send designs for production via email from the portalSend a design directly by email from the portal so it reaches production.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- ଏକ ଉତ୍ପାଦନ ଡିଜାଇନ ଲିଙ୍କ ସେୟାର କରନ୍ତୁଉତ୍ପାଦନ ଡିଜାଇନ ପାଇଁ ସାଧାରଣ ସେୟାର ଲିଙ୍କକୁ ଡିଜାଇନ ଲିଙ୍କ ଭାବରେ ବ୍ୟବହାର କରନ୍ତୁ।
- ଆର୍କାଇଭ୍ ତାଲିକାରୁ ଏକ ପ୍ରୋଡକ୍ସନ୍ ଡିଜାଇନ୍ ଅନ୍-ଆର୍କାଇଭ୍ କରନ୍ତୁProduction Designs > Archived ତାଲିକାରୁ ଏକ ଆର୍କାଇଭ୍ ହୋଇଥିବା ପ୍ରୋଡକ୍ସନ୍ ଡିଜାଇନ୍ କୁ In Progress କୁ ଫେରାଇ ଆଣନ୍ତୁ।
- ଉତ୍ପାଦନ ଡିଜାଇନର ଭୂମିକା ବୁଝନ୍ତୁଉତ୍ପାଦନ ଡିଜାଇନର କିପରି ଡିଜାଇନର ଏବଂ କାରଖାନା ଦଳକୁ ସଂଯୋଗ କରେ ଏବଂ ଉତ୍ପାଦନ ପୂର୍ବରୁ ଡିଜାଇନ ଯାଞ୍ଚ କରେ ତାହା ଜାଣନ୍ତୁ।
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- Use consistent project naming so production can identify the jobTrack each job through production by relying on the project name, designer and status.
- Use Outputs > Production Settings in the design editorOpen Outputs > Production Settings to refresh the cache, check for overlapping modular units and reassign unit, panel and cabinet finish annotations.
- କଟ୍ ଲିଷ୍ଟ ଯାଞ୍ଚ କରନ୍ତୁ ଏବଂ ପ୍ରୋଜେକ୍ଟକୁ MES କୁ ପଠାନ୍ତୁଏକ ଡିଜାଇନ୍ ଅନ୍ତିମ ହେବା ପରେ, କଟ୍ ଲିଷ୍ଟ ଯାଞ୍ଚ କରନ୍ତୁ ଏବଂ ପ୍ରୋଜେକ୍ଟକୁ କାରଖାନା ଉତ୍ପାଦନ ପାଇଁ MES portal କୁ ପଠାନ୍ତୁ।
ୱାର୍କ ଅର୍ଡର ଏବଂ ପ୍ରକାଶନ31
- Download board layouts, labels and pasting reportsDownload the board summary and layout files for every board type, and get panel labels, sheet labels and pasting reports as separate downloads.
- ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ରୁ ପ୍ୟାନେଲ୍ଗୁଡ଼ିକୁ ବାଦ୍ ଦିଅନ୍ତୁଉତ୍ପାଦନକୁ ପଠାଇବା ପୂର୍ବରୁ ଏକ ଉପସେଟ୍ ଚୟନ କରି କିମ୍ବା ସେଗୁଡ଼ିକୁ ଲୁଚାଇ ପ୍ୟାନେଲ୍ଗୁଡ଼ିକୁ କଟ୍ଲିଷ୍ଟ ଏବଂ ସିଡ୍ୟୁଲ୍ରୁ ବାହାର କରନ୍ତୁ।
- How saw file formats are chosen for the production machineLearn how the production machine's output type decides the saw file format and what the beam saw operator should check.
- Verify edge bands and cutlist before productionCheck edge bands, back panels and cutlist output in QC Mode before releasing the design.
- Download files from a published work orderOpen the published version of a work order to download raw-material CSVs and machine saw files.
- ଉଲ୍ଲଂଘନ ତାଲିକାରୁ ସଂଘର୍ଷଗୁଡ଼ିକୁ ସମାଧାନ କରନ୍ତୁଉଲ୍ଲଂଘନ ତାଲିକା ଖୋଲି ସେଠାରେ solve-collisions କ୍ରିୟା ବ୍ୟବହାର କରି ଏକ ସଂଘର୍ଷ ସଫା କରନ୍ତୁ, ଯେଉଁଠାରେ ମଡେଲ ଉପରେ ସଂଘର୍ଷ ଚିହ୍ନଗୁଡ଼ିକ ତାଲିକା ଏଣ୍ଟ୍ରିଗୁଡ଼ିକ ସହିତ ମେଳ ଖାଉଛି।
ସବୁ ଦେଖାନ୍ତୁ (31)
- ପାର୍ଟିସନ ପ୍ରସ୍ଥ ବଦଳାଇ କିମ୍ବା କୋଲିଜନ ସମାଧାନ କରି ଡ୍ରିଲ କୋଲିଜନ ସମାଧାନ କରନ୍ତୁସିଙ୍ଗଲ ୟୁନିଟ CAM ମୋଡରେ ଡ୍ରିଲ ଏବଂ ଡ୍ରିଲ କୋଲିଜନ ପ୍ୟାନେଲ ଉଲ୍ଲଂଘନ ଯାଞ୍ଚ କରନ୍ତୁ, ତାପରେ ବଡ଼ ସମସ୍ୟା ପାଇଁ solve collisions ବ୍ୟବହାର କରନ୍ତୁ।
- କୌଣସି ଏଲିମେଣ୍ଟ ସମସ୍ତ ଆଉଟପୁଟ୍ରୁ କାହିଁକି ବାଦ ପଡ଼ିଛି ତାହା ଯାଞ୍ଚ କରନ୍ତୁପ୍ରତ୍ୟେକ ଆଉଟପୁଟ୍ରୁ ଏକ ଏଲିମେଣ୍ଟ କାହିଁକି ଅନୁପସ୍ଥିତ ତାହା ଖୋଜିବା ପାଇଁ ବାଦ ପଡ଼ିବାର କାରଣଗୁଡ଼ିକୁ ଗୋଟି ଗୋଟି କରି ଦେଖନ୍ତୁ।
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- Download a machine cutlist and handle unsupported formatsOpen the Cutlist tab, pick a panel-saw machine and fall back to CSV when the machine's format is not supported.
- Find and open board layout violationsSpot board types with violations and open the read-only violations view to see the offending panels.
- ପ୍ୟାନେଲ, ହାର୍ଡୱେର ଏବଂ ସେଲଫ ଧକ୍କାକୁ ସୂଚାଉଥିବା ଉଲ୍ଲଂଘନଗୁଡ଼ିକୁ ଠିକ କରନ୍ତୁଡିଜାଇନରେ କଣ ଏକ ଉଲ୍ଲଂଘନ ସୃଷ୍ଟି କରେ ଏବଂ ଏହାକୁ ସ୍ୱୟଂଚାଳିତ ଭାବରେ କିମ୍ବା ହାତରେ କିପରି ହଟାଇବେ ତାହା ଜାଣନ୍ତୁ।
- Generate a board layout and choose Accept, Abort or Re-generateOpen the Board Layout tab to start generation, then decide whether to accept the best layout so far, abort the run, or force a fresh regeneration.
- How output quantity above 1 duplicates panels with _1/_2 labelsSet a cabinet's output quantity above one and see how its panels are laid out and labelled as copies while sharing a single CNC file per panel.
- ଉଲ୍ଲଂଘନ ତାଲିକାରୁ ଡିଜାଇନ ଉଲ୍ଲଂଘନଗୁଡ଼ିକ ପଢ଼ନ୍ତୁଉତ୍ପାଦନ ଆଉଟପୁଟ ତିଆରି କରିବା ପୂର୍ବରୁ ବିଚାରାଧୀନ ଉଲ୍ଲଂଘନଗୁଡ଼ିକ ସମୀକ୍ଷା କରିବା ପାଇଁ ଉଲ୍ଲଂଘନ ତାଲିକା ଖୋଲନ୍ତୁ।
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- Verify cut list and clear violations before sending to factoryQuality-check the board layout and review the cut list of panel sizes before a design goes to the factory.
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- ଶୂନ୍ୟ କିମ୍ବା ଅବୈଧ ଆକାର ଥିବା ପ୍ୟାନେଲ ଖୋଜିବା ପାଇଁ ପ୍ରକାଶନ ଉଲ୍ଲଂଘନ ଯାଞ୍ଚ କରନ୍ତୁଉତ୍ପାଦନ ଫାଇଲ ଡାଉନଲୋଡ୍ କରିବା ପୂର୍ବରୁ ଡିଜାଇନ୍ ପ୍ରକାଶ କରନ୍ତୁ ଏବଂ ଉଲ୍ଲଂଘନ ତାଲିକା ସମୀକ୍ଷା କରନ୍ତୁ, ଯାହାଦ୍ୱାରା ଶୂନ୍ୟ କିମ୍ବା ଅବୈଧ ଆକାର ଥିବା ପ୍ୟାନେଲ ଖୋଜି ପାରିବେ।
- ଏକ ପ୍ରକାଶିତ ୱାର୍କ ଅର୍ଡରରେ ପ୍ୟାନେଲ ଏବଂ ସିଟ୍ ଲେବଲ୍ ଟେମ୍ପଲେଟ୍ ଚୟନ କରନ୍ତୁଷ୍ଟିକର୍ ଏବଂ ଲେବଲ୍ ସେଟିଂସ୍ ଉପଲବ୍ଧ କରିବା ପାଇଁ ଏକ ୱାର୍କ ଅର୍ଡର ପ୍ରକାଶ କରନ୍ତୁ, ତାପରେ ଏହାର ବୋର୍ଡ ଲେଆଉଟ୍ ପାଇଁ ଡିଫଲ୍ଟ ପ୍ୟାନେଲ ଏବଂ ସିଟ୍ ଲେବଲ୍ ଟେମ୍ପଲେଟ୍ ଚୟନ କରନ୍ତୁ।
- Edit Work Scope > Show Units ରେ ଏକାଧିକ ୟୁନିଟ୍ ଅକ୍ଷମ କରନ୍ତୁBulk Disable ସହିତ ଏକ ୟୁନିଟ୍ ବନ୍ଦ କରନ୍ତୁ ଏବଂ ଏହା Removed Units କୁ ସ୍ଥାନାନ୍ତରିତ ହେଉଥିବା ଏବଂ ଏହାର କାର୍ଡରେ ଏକ overridden ସ୍ଥିତି ଦେଖନ୍ତୁ।
- ଡିଜାଇନରେ ପେଣ୍ଡିଂ ଉଲ୍ଲଂଘନ ଥିବାବେଳେ ଏକ କଟ୍ ଲିଷ୍ଟ PDF ଡାଉନଲୋଡ୍ କରନ୍ତୁଡିଜାଇନରେ ଏପର୍ଯ୍ୟନ୍ତ ପେଣ୍ଡିଂ ଉଲ୍ଲଂଘନ ଥିଲେ ମଧ୍ୟ Cut List PDF ଡାଉନଲୋଡ୍ କରନ୍ତୁ, ସେହି ଉଲ୍ଲଂଘନଗୁଡ଼ିକ କେଉଁ ସ୍କୋପ୍ ଏବଂ ଯାଞ୍ଚକୁ ଅନ୍ତର୍ଭୁକ୍ତ କରେ ତାହା ଯାଞ୍ଚ କରିବା ପରେ।
- ବକେୟ ଉଲ୍ଲଂଘନ ସହିତ ଏକ ୱାର୍କ ଅର୍ଡର ଡାଉନଲୋଡ କରନ୍ତୁଯେତେବେଳେ ଏକ ୱାର୍କ ଅର୍ଡରରେ ବକେୟ ଉଲ୍ଲଂଘନ ରହିଥାଏ, MES ପୋର୍ଟାଲ ଡାଉନଲୋଡ ପୂର୍ବରୁ ସତର୍କ କରିଦିଏ ଯେ ଆଉଟପୁଟଗୁଡ଼ିକ ଭୁଲ ହୋଇପାରେ ଏବଂ ଆପଣ କଣ କରିବେ ତାହା ବାଛିବାକୁ ଦିଏ।
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Exempt violations to hide production errors from designersHide production issues and errors from designers by exempting violations in the admin settings.
- ପୁନଃ-ସିଙ୍କ୍ ରୁମ୍ ସ୍କୋପ୍ ପରିବର୍ତ୍ତନ କଲାପରେ ୟୁନିଟ୍ଗୁଡ଼ିକୁ ପୁନରୁଦ୍ଧାର କରନ୍ତୁଯେତେବେଳେ ଉତ୍ସ ଡିଜାଇନ୍ ସହିତ ଏକ ପୁନଃ-ସିଙ୍କ୍ ୟୁନିଟ୍ଗୁଡ଼ିକୁ ଅପସାରଣ କରୁଥିବା ପରି ଦେଖାଯାଏ, ସେତେବେଳେ ନିଶ୍ଚିତକରଣରେ ଦେଖାଯାଉଥିବା ରୁମ୍ ସ୍କୋପ୍ ଯାଞ୍ଚ କରନ୍ତୁ ଏବଂ 'Units removed from manufacturing' ରୁ ୟୁନିଟ୍ଗୁଡ଼ିକୁ ପୁନରୁଦ୍ଧାର କରନ୍ତୁ।
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- ଏକ PD ଶାଖାକୁ ପୁନଃସିଙ୍କ କରନ୍ତୁ ଏବଂ ଉଭୟ ଶାଖାର ପରିବର୍ତ୍ତନ ରଖନ୍ତୁଏକ PD ଶାଖାକୁ ପୁନଃସିଙ୍କ କରନ୍ତୁ ଯାହାଫଳରେ ଏହା ଅପଡେଟ ହେବ ଏବଂ ଉଭୟ ଶାଖାରେ କରାଯାଇଥିବା ପରିବର୍ତ୍ତନ ରଖାଯିବ, ଜାଣିରଖନ୍ତୁ ଯେ ଏକ ଦ୍ୱନ୍ଦ୍ୱପୂର୍ଣ୍ଣ PD-ଶାଖା ପରିବର୍ତ୍ତନ ବାଦ ଦିଆଯାଏ।
- Review and accept admin setting differences on a work orderSee which work order settings differ from the admin values and accept them to continue to the Violations check or a CNC machine-files download.
- ଉତ୍ପାଦନ ଡିଜାଇନରେ ସଂଘର୍ଷ ସମାଧାନ କରନ୍ତୁCAM Settings ରେ ସେଟ୍ ହୋଇଥିବା ପରିମାଣ ଅନୁସାରେ କନେକ୍ଟରଗୁଡ଼ିକୁ ସ୍ଥାନାନ୍ତର କରିବା ପାଇଁ ଏବଂ ପ୍ରତ୍ୟେକ ପରିବର୍ତ୍ତନ ସମୀକ୍ଷା କରିବା ପାଇଁ Violations ରୁ Solve collisions ଚଲାନ୍ତୁ।
କଟ ଲିଷ୍ଟ କଲମ ଏବଂ ସେଟିଂସ65
- କଟ୍ ଲିଷ୍ଟ କଲମଗୁଡ଼ିକୁ କଷ୍ଟମାଇଜ୍ କରନ୍ତୁ ଏବଂ ଏଜ୍ ବ୍ୟାଣ୍ଡ ମୋଟେଇ ଅନ୍ତର୍ଭୁକ୍ତ କରନ୍ତୁଆପଣ ଚାହୁଁଥିବା କଟ୍ ଲିଷ୍ଟ କଲମଗୁଡ଼ିକୁ ସେଟ୍ ଅପ୍ କରନ୍ତୁ ଏବଂ ଗଣନାରେ ଏଜ୍ ବ୍ୟାଣ୍ଡ ମୋଟେଇ ଗଣନା ହେବ କି ନାହିଁ ନିର୍ଣ୍ଣୟ କରନ୍ତୁ।
- ଉତ୍ପାଦନ କଟ୍ ତାଲିକାରେ ତିଆରି ଆକାର ସହିତ କଟ୍ ଆକାର ଦେଖାନ୍ତୁଐଚ୍ଛିକ କଟ୍ ସ୍ତମ୍ଭଗୁଡ଼ିକ ଚାଲୁ କରନ୍ତୁ, ଯାହାଫଳରେ କଟ୍ ତାଲିକାରେ ତିଆରି ପ୍ୟାନେଲ୍ ଆକାର ପାଖରେ ଏଜ୍ ବ୍ୟାଣ୍ଡିଂ ପୂର୍ବରୁ କାଟିବାକୁ ଥିବା ଆକାର ଦେଖାଯିବ।
- ଏଜ ବ୍ୟାଣ୍ଡର ମୋଟେଇ କିପରି ତିଆରି ଶଟରର ଆକାରକୁ ପ୍ରଭାବିତ କରେପ୍ରତ୍ୟେକ ପ୍ୟାନେଲ ପାଇଁ ଏଜ ବ୍ୟାଣ୍ଡିଂ କିପରି ଲଗାଯାଏ ଏବଂ ପ୍ୟାନେଲର ଏଜ ବ୍ୟାଣ୍ଡ ସେଟିଂରେ ଏହାର ମୋଟେଇ କେଉଁଠି ଦେଖାଯାଏ ତାହା ଜାଣନ୍ତୁ।
- ପ୍ରି-ମିଲିଂ ଏବଂ ଏଜ ବ୍ୟାଣ୍ଡ ପାଇଁ Cut L ଏବଂ Cut W ଦେଖାନ୍ତୁCut L ଏବଂ Cut W ସ୍ତମ୍ଭ ଯୋଡ଼ନ୍ତୁ ଯାହାଫଳରେ କଟଲିଷ୍ଟରେ ସମାପ୍ତ ଆକାର ସହିତ କଟିଂ ଆକାର ଦେଖାଯାଏ।
- ପ୍ୟାନେଲଗୁଡ଼ିକୁ ଯାଞ୍ଚ କରିବା ପାଇଁ କଟ୍ ଲିଷ୍ଟରେ କଟିଂ ସାଇଜ୍ ଏବଂ ଏଜ୍ ବ୍ୟାଣ୍ଡିଂ କଲମଗୁଡ଼ିକୁ ସକ୍ଷମ କରନ୍ତୁକଟ୍ ଲିଷ୍ଟରେ କଟିଂ ସାଇଜ୍ ଏବଂ ଏଜ୍ ବ୍ୟାଣ୍ଡିଂ କଲମଗୁଡ଼ିକୁ ଚାଲୁ କରନ୍ତୁ, ଯାହାଦ୍ୱାରା ପ୍ୟାନେଲ ସାଇଜ୍ ଆପଣଙ୍କ ଏଜ୍ ବ୍ୟାଣ୍ଡ ଏବଂ ପ୍ରିମିଲିଂ ସେଟିଂସ୍ ସହିତ ମେଳ ଖାଉଛି କି ନାହିଁ ଆପଣ ଯାଞ୍ଚ କରିପାରିବେ।
- Get CAM details, cut list and raw material BOQ from a production designProduce CAM details, the cut list and the raw material BOQ together from a production design, scoped and downloaded as you need.
ସବୁ ଦେଖାନ୍ତୁ (65)
- How panel sizes include edge band and laminate in the cut listLearn how the Finished Size and Cut Size columns in the production cut list differ, and which size CAM output uses.
- ଶଟର ପ୍ୟାନେଲ ଲୁଚାଇ କେବଳ କାର୍କାସ କଟଲିଷ୍ଟ ପାଆନ୍ତୁକଟଲିଷ୍ଟ ତିଆରି କରିବା ପୂର୍ବରୁ ଶଟର ପ୍ୟାନେଲ ଲୁଚାନ୍ତୁ, ଯାହାଫଳରେ କେବଳ କାର୍କାସ ଓ ଦୃଶ୍ୟମାନ ପାର୍ଶ୍ୱ ଆଉଟପୁଟ ହେବ।
- Fix panel size discrepancies caused by edge band thicknessMake sure the edge band's actual thickness value is correct, because the software calculates panel size from it rather than from its name.
- Get edge banding quantity from the softwareAdd the exact edge band you use to the setup so the software can give you its quantity.
- Show edge band, panel name and size columnsTurn on the edge band column and read panel name, finished size and cut size in the cutlist.
- ପ୍ୟାନେଲଗୁଡ଼ିକରେ କଷ୍ଟମ ଲେବଲ ଯୋଡ଼ନ୍ତୁ ଏବଂ ସେଗୁଡ଼ିକୁ କଟ୍ ଲିଷ୍ଟରେ ଦେଖାନ୍ତୁପ୍ୟାନେଲଗୁଡ଼ିକରେ, କଷ୍ଟମ ପ୍ୟାନେଲ ସହିତ, କଷ୍ଟମ ଲେବଲ ଯୋଡ଼ନ୍ତୁ ଏବଂ କଷ୍ଟମ ଲେବଲ କଲମ ସକ୍ରିୟ କରି ସେଗୁଡ଼ିକୁ କଟ୍ ଲିଷ୍ଟରେ ଏବଂ ଷ୍ଟିକରରେ ଦେଖାନ୍ତୁ।
- ଓଭରଲ୍ୟାପ୍ ହେଉଥିବା ଆଇଟମଗୁଡ଼ିକ ପାଇଁ ଲେବଲ୍ ପ୍ରପର୍ଟି ମାଧ୍ୟମରେ କଷ୍ଟମ୍ ଲେବଲ୍ ଯୋଡ଼ନ୍ତୁଲେଆଉଟ୍ରେ ଲେବଲ୍ ଓଭରଲ୍ୟାପ୍ ହେଲେ ଲେବଲ୍ ପ୍ରପର୍ଟି ମାଧ୍ୟମରେ ଏକ କଷ୍ଟମ୍ ଲେବଲ୍ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଏହାକୁ ଯେଉଁଠି ଆବଶ୍ୟକ ସେଠାରେ ରଖନ୍ତୁ।
- Choose what prints as the panel name on labelsSet the panel-name element on a label template so the printed label, preview and machine files show the design name, the custom label or a combined name.
- How edgeband lengths in the BOQ are calculatedSee how extensions, edge profiles, pre-milling, cut shapes and wastage adjust each band's BOQ length so you can reconcile the totals.
- How mapped edge band thickness drives cut list dimensionsLearn how the edge band thickness mapped to a material directly affects the cut list dimensions.
- କଟ୍ ଲିଷ୍ଟ ପ୍ୟାନେଲଗୁଡ଼ିକ କିପରି କ୍ରମବଦ୍ଧ ଓ ଗ୍ରୁପ୍ ହୋଇଛି ତାହା ବୁଝନ୍ତୁଉତ୍ପାଦନ କଟ୍ ଲିଷ୍ଟ କିପରି କ୍ୟାବିନେଟ୍ ଅନୁସାରେ ପ୍ୟାନେଲଗୁଡ଼ିକୁ ଆରୋହୀ କ୍ରମରେ ତାଲିକାଭୁକ୍ତ କରେ ଏବଂ ପ୍ରତ୍ୟେକ ପ୍ୟାନେଲର ରୁମ୍ କିପରି ଦେଖିବେ ତାହା ଜାଣନ୍ତୁ।
- Choose the cutlist type and export the cut list CSVSwitch the cutlist type on the Cutlist tab and export a CSV that follows the selected type for beam saw machines.
- ଉତ୍ପାଦନ ସେଟିଂସରେ କଟ୍ ଲିଷ୍ଟ ସ୍ତମ୍ଭ ଏବଂ ଆକାରର ସଠିକତା ବିନ୍ୟାସ କରନ୍ତୁଆପଣଙ୍କୁ ଆବଶ୍ୟକ କଟ୍ ଲିଷ୍ଟ ଫିଲ୍ଡଗୁଡ଼ିକ ଚାଲୁ କରନ୍ତୁ ଏବଂ ଆକାରର ସଠିକତା ସେଟ୍ କରନ୍ତୁ, ଯାହାଦ୍ୱାରା ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ ଆପଣ ଚାହୁଁଥିବା ପରି ଆକାରଗୁଡ଼ିକୁ ରାଉଣ୍ଡ କରିବ।
- ଉତ୍ପାଦନ ଦୃଶ୍ୟରୁ କଟ୍ ତାଲିକା ଡାଉନଲୋଡ୍ କରନ୍ତୁଉତ୍ପାଦନ ଦୃଶ୍ୟରୁ ପ୍ୟାନେଲ୍ ତାଲିକାକୁ Excel କିମ୍ବା PDF ଫାଇଲ୍ ଭାବରେ ଡାଉନଲୋଡ୍ କରି ଏହାର ସ୍ତମ୍ଭଗୁଡ଼ିକ ପଢ଼ନ୍ତୁ।
- Read panel dimensions in the cut size columnFind each panel's dimensions in the cut size column of the cut list.
- Understand cut edgeband on panels with cut or slanted edgesLearn when a panel carries a cut edgeband and why rectangular panels correctly show 'No Edgeband'.
- Generate and download a cut list with cut length and edge bandsGenerate a cut list from the production module and download it, enabling parameters such as cut length and edge bands before generating.
- How cutting size is calculatedLearn how cutting size subtracts edge banding and pre-milling from the panel dimension.
- How shelf depth is calculated in cut listsLearn how an adjustable shelf's depth is derived from the carcass depth, the shelf reveal and the back panel offset.
- Set board sizes, offcuts and saw width in Board Layout SettingsGive each board type its sheet sizes and stock offcuts, set the cutting type and saw width, and override the size for a single board when needed.
- Set pre-milling type and read edgeband columns in the MES cutlistChoose how pre-milling is applied and read each edge's band and cut length in the MES cutlist.
- Understand shutter sizing in a child partitionLearn why a shutter added to a child partition takes its size from that partition rather than the overall unit height.
- Understand skirting notches on wardrobe carcass side panelsLearn which units get skirting cuts on carcass side panels, how each wardrobe type maps its cuts, and what to check when a notch is missing.
- Add Combined Label and room name columnsTurn on the Combined Label and room name columns and move room name to the top of the cutlist.
- Change the cabinet code shown in cutlist outputsEdit the cabinet code field's display name in the Homag or Biesse tab of Cutlist Preferences so your cutlist outputs show the column name you want.
- Check which downloads need a published work orderSee which footer downloads stay disabled on an unpublished work order and which ones remain available.
- How cut dimensions relate to finish dimensionsLearn when a panel's cut length and width match its finish dimensions and when edgebanding makes them differ.
- How cutlist and board layout accuracy settings control decimal placesLearn how the accuracy control in cutlist settings and board layout settings decides how many decimal places sizes are shown with.
- How cut list panel names use unit and panel codesLearn how each cut list panel is identified by a unit code plus a panel number and how that identifier links back to the 3D model.
- How the Room Name field in cutlist labels is filledLearn where the Room Name field in the cutlist/label export gets its value and what it shows when a project has no room defined.
- Identify rooms in the cut list without renaming cabinetsShow the room name as a separate column in the cut list so you can tell which room each cabinet belongs to without changing the cabinet name.
- କାର୍ଯ୍ୟ ପରିସର ସହିତ ଏକ କଟ୍ ତାଲିକାକୁ ଏକ କୋଠରୀକୁ ସୀମିତ କରନ୍ତୁଏକ କୋଠରୀ ପାଇଁ ଏକ କାର୍ଯ୍ୟ ପରିସର ସୃଷ୍ଟି କରନ୍ତୁ ଯାହାଫଳରେ କଟ୍ ତାଲିକା କେବଳ ସେହି କୋଠରୀର କ୍ୟାବିନେଟଗୁଡ଼ିକୁ ପ୍ରତିଫଳିତ କରେ।
- Open Cutlist Settings and apply column changesOpen Cutlist Settings from the cutlist header and apply visibility, naming and order changes per cutlist type.
- Review cut list by cabinet then panel detailsOpen a cabinet's cut list, check each panel's details and mark panels verified, and view the unit visually to confirm rails, shelves and back panel position.
- Set pre-milling type by edge-band thickness or for all panelsChoose whether pre-milling follows each panel's edge-band thickness or applies the same setting to all panels, then save and recalculate to verify the cutting length.
- Set the grain convention and show grain in panel infoChoose how grain is labelled and see the Grain row in the board layout's panel info.
- Understand fixed shelf depth and partition dimensionsLearn that the partition refers to the space within the carcass, not the outer panel, when reading fixed shelf depths.
- Add extra custom columns to a cutlist exportLearn how many extra custom columns you can add beyond the standard fields when exporting a cutlist for a third-party saw or ERP system.
- Change a panel's core in QC mode > Panels > Modify PanelsSet a panel's Core Material Source and, when you need a different core for that panel alone, switch the Source to Custom and change it.
- Change the cabinet code label in cutlist preferencesChoose the Cabinet Code field for cutlist output and set its display name on the Homag, Biesse or Basic tab.
- Choose between a full top panel and half railsLearn how a full top panel uses more material and gives different panel sizes than half rails.
- Control cut list columns and their exported orderFilter rows with the search box and set column visibility, names and order so the export matches the screen.
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- Enable material code column to group cutlist by core materialUse the material code column, which carries core material information, to group the cutlist by core material.
- How back panel material assignment affects finish sheet countLearn why a finish can show more sheets than expected when a back panel uses a different material from the carcass.
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- How construction edges change carcass panel sizes in the cutlistLearn how the inset or outset choice at each shared carcass edge changes panel sizes in the cutlist.
- Read part codes and part names in the cut listLearn how the part code and part name in the cut list tell you which cabinet and which panel a row belongs to.
- Remove cut length and cut width columns when pre-milling is usedHide the cut length and cut width columns from the cut list display when pre-milling makes them unnecessary.
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- Set dimension accuracy and header options per cutlist typeSet dimension accuracy to 1 mm and switch on project and store header rows for the cutlist type you are working with.
- Set elevation preferences in the admin portalControl which panels appear as additional manufacturing details in elevations by setting the elevation preferences in the admin portal.
- CSV ଆଉଟପୁଟ୍ ଏବଂ ଚୟନିତ ସ୍ତମ୍ଭ ସହିତ ଏକ ପ୍ୟାନେଲ୍ ସ ମେସିନ୍ ସେଟ୍ ଅପ୍ କରନ୍ତୁଆପଣଙ୍କ ଆବଶ୍ୟକ ସ୍ତମ୍ଭ ସହିତ CSV କଟ୍ ଲିଷ୍ଟ ଆଉଟପୁଟ୍ କରିବା ପାଇଁ ଏକ କଟିଂ ପ୍ୟାନେଲ୍ ସ ମେସିନ୍ କନଫିଗର୍ କରନ୍ତୁ, ପାର୍ଟ କୋଡ୍ରୁ ଆରମ୍ଭ କରି।
- Show client name and work order code columns in the cutlistSwitch on the client name and work order code columns in the cutlist field settings so they appear alongside the room name.
- Show material code alone by turning off finish columnsCombine the core material code with the external and internal finish codes into one material code and hide the separate finish columns for a more compact cutlist.
- ମୌଳିକ କଟ୍ ଲିଷ୍ଟ ବୁଝନ୍ତୁ ଏବଂ ଏକ ୟୁନିଟ୍ର ପ୍ୟାନେଲ୍ଗୁଡ଼ିକ ଖୋଜନ୍ତୁମୌଳିକ କଟ୍ ଲିଷ୍ଟ କଣ ଦେଖାଏ, Operations ଏବଂ Quantity ସ୍ତମ୍ଭଗୁଡ଼ିକ କେବେ ଦେଖାଯାଏ, ଏବଂ ଏଥିରେ ଏକ ୟୁନିଟ୍ର ପ୍ୟାନେଲ୍ଗୁଡ଼ିକ କିପରି ଖୋଜିବେ ତାହା ଶିଖନ୍ତୁ।
- Understand why PVC skirting is not on the cut listLearn that PVC skirting is bought readymade, so it is never cut from wood and never appears in the cut list.
- Use pre-milling to compensate for edge-band thicknessApply a per-side pre-milling allowance instead of cutting panels oversize, and decide whether your factory needs pre-milling at all.
- କଟ୍ ଲିଷ୍ଟରେ ପ୍ରି-ମିଲିଂ ସ୍ତମ୍ଭ କେବେ ଆବଶ୍ୟକକଟ୍ ଲିଷ୍ଟରେ ପ୍ରି-ମିଲିଂ ସ୍ତମ୍ଭ କେବେ ଆବଶ୍ୟକ ଏବଂ କେବେ କେବଳ ସେହି ପ୍ୟାନେଲଗୁଡ଼ିକ ପାଇଁ ଉପଯୋଗୀ ଯାହାର ପ୍ରି-ମିଲିଂ ସେଟିଂ ପ୍ରତି ଧାରରେ ଭିନ୍ନ ହୁଏ, ତାହା ଜାଣନ୍ତୁ।
କଟ ଲିଷ୍ଟ ଆଉଟପୁଟ ଏବଂ ମେସିନ ଫର୍ମାଟ52
- NC ଏବଂ beam saw ମେସିନ ପାଇଁ Infurnia CSV cut list କିପରି କାମ କରେNC କିମ୍ବା beam saw ମେସିନ ପାଇଁ Infurnia CSV ଫାଇଲରେ କଣ ରହିଥାଏ ଏବଂ କଣ ମେସିନ ଉପରେ ଛାଡ଼ି ଦିଆଯାଏ, ତାହା ଜାଣନ୍ତୁ।
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- ୱାର୍କ ଅର୍ଡରରୁ କଟ୍ ଲିଷ୍ଟ ଏବଂ କଞ୍ଚାମାଲ ଆଉଟପୁଟ୍ ଡାଉନଲୋଡ୍ କରନ୍ତୁୱାର୍କ ଅର୍ଡର ପ୍ରକାଶ କରନ୍ତୁ, ତାପରେ ପ୍ରୋଡକ୍ସନ ପୋର୍ଟାଲରୁ କଟ୍ ଲିଷ୍ଟ, କଞ୍ଚାମାଲ ତାଲିକା ଏବଂ ବୋର୍ଡ ଲେଆଉଟ୍ ଡାଉନଲୋଡ୍ କରନ୍ତୁ।
- Match each machine Output selection to its file formatSee which file extension each machine Output selection produces, from .mpr and .cix to .nc, .xml and .dxf.
- କଟ୍ ଲିଷ୍ଟ ଏବଂ ବୋର୍ଡ ଲେଆଉଟ୍ ଡାଉନଲୋଡ୍ କରନ୍ତୁ, ତାପରେ କୋର୍ ମେଟେରିଆଲ୍ ଅନୁସାରେ ସର୍ଟ କରନ୍ତୁପ୍ରକାଶିତ ସଂସ୍କରଣରୁ ଆପଣଙ୍କର କଟ୍ ଲିଷ୍ଟ ଏବଂ ବୋର୍ଡ ଲେଆଉଟ୍ ଡକ୍ୟୁମେଣ୍ଟ ଡାଉନଲୋଡ୍ କରନ୍ତୁ, ତାପରେ ନିର୍ଦ୍ଦିଷ୍ଟ ବୋର୍ଡ ପ୍ରକାର ପାଇଁ କଟ୍ ଲିଷ୍ଟ ପାଇବା ପାଇଁ CSV କୁ କୋର୍ ମେଟେରିଆଲ୍ ଅନୁସାରେ ସର୍ଟ କରନ୍ତୁ।
- କଟିଂ ଲେଆଉଟ, କଟଲିଷ୍ଟ ଏବଂ CNC ଫାଇଲ ଆଉଟପୁଟ କରନ୍ତୁଆପଣଙ୍କ କରତ ଏବଂ ମେସିନ ପାଇଁ ବୋର୍ଡ ଲେଆଉଟ, କଟଲିଷ୍ଟ ଏବଂ CNC ଫାଇଲ ପାଆନ୍ତୁ।
ସବୁ ଦେଖାନ୍ତୁ (52)
- ଆଉଟପୁଟ୍ ମେଟେରିଆଲ୍, ହାର୍ଡୱେର୍ ଏବଂ BOQ ତାଲିକାକ୍ରୟ ଏବଂ ଯାଞ୍ଚ ପାଇଁ ମେଟେରିଆଲ୍, ହାର୍ଡୱେର୍, ବୋର୍ଡ ପ୍ରକାର ଏବଂ BOQ ତାଲିକା ପ୍ରସ୍ତୁତ କରନ୍ତୁ।
- Add a machine in MES machine settingsAdd a machine by choosing its type, category and output format, then enter its name and settings.
- କଟ୍ ଲିଷ୍ଟ ସ୍ତମ୍ଭ ବାଛନ୍ତୁ ଏବଂ ପ୍ୟାନେଲ୍ ସିଡ୍ୟୁଲ୍ CSV ରପ୍ତାନି କରନ୍ତୁ62ଟି କଟ୍ ଲିଷ୍ଟ ସ୍ତମ୍ଭ ମଧ୍ୟରୁ କେଉଁଗୁଡ଼ିକ ଦେଖାଇବେ ବାଛନ୍ତୁ, ତାପରେ ଏହାର ସୂଚନା ଧାଡ଼ି ଏବଂ ଏଜ୍ ବ୍ୟାଣ୍ଡ୍ ଲମ୍ବ ସହିତ ଏକ ପ୍ୟାନେଲ୍ ସିଡ୍ୟୁଲ୍ CSV କୁ ରପ୍ତାନି କରନ୍ତୁ।
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- How drill information and the cut list come from hardwareLearn how the hardware you define in the design produces drill information and the cut list.
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Download a raw material summary for a completed projectDownload a raw material summary of core, finish and edge band material once the project is complete.
- Explore the Board Layout footer, optimization settings and outputs in MESLearn what the all-board-types footer, Optimization Settings, Exploded View output and Cutlist type dropdown offer in an MES work order.
- Get a screw-level hardware list from production outputSee how production output gives you a basic hardware list, and how configuring hardware setup lets it detail individual items such as which screw is used and how many are required.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- ଏକ ପ୍ୟାନେଲ ଡ୍ରଇଂ PDF ରେ ଡ୍ରିଲ ଅବସ୍ଥାନ, ଲେଜେଣ୍ଡ ଏବଂ ଲାଇନ ଷ୍ଟାଇଲ ପଢ଼ନ୍ତୁମାନୁଆଲ ପ୍ୟାନେଲ ଡ୍ରଇଂ PDF ପ୍ରତ୍ୟେକ ଡ୍ରିଲର ଅବସ୍ଥାନ, ଆକାର ଏବଂ ପ୍ରକାର କିପରି ଚିହ୍ନଟ କରେ ତାହା ଜାଣନ୍ତୁ, ଯାହାଫଳରେ ଆପଣ ଏହାକୁ କାର୍ଯ୍ୟସ୍ଥଳରେ ପଢ଼ିପାରିବେ।
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- ମେସିନ ଆଉଟପୁଟ ବାଛିବା ପୂର୍ବରୁ ଗ୍ରହଣୀୟ ଫାଇଲ ଫର୍ମାଟ ଯାଞ୍ଚ କରନ୍ତୁଆପଣ ଏକ ଆଉଟପୁଟ ଫର୍ମାଟ ବାଛିବା ପୂର୍ବରୁ ଆପଣଙ୍କ ମେସିନ କେଉଁ ଫାଇଲ ଫର୍ମାଟ ଗ୍ରହଣ କରେ ତାହା ନିଶ୍ଚିତ କରନ୍ତୁ, ତାପରେ ପ୍ଲାଟଫର୍ମ ପ୍ରଦାନ କରୁଥିବା ସୁସଙ୍ଗତ ଆଉଟପୁଟ ଚେଷ୍ଟା କରନ୍ତୁ।
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure cutlist export options and pre-millingSet dimension accuracy, quotes, header rows and pre-milling values so exported cutlist values come out correct.
- Confirm the format a machine accepts before exportingCheck the machine's supported format before exporting cut list and production data, and plan a CSV workflow when DXF carries geometry only.
- Download a machine-specific cutlist from Custom CutlistPick a panel-saw machine from the Custom Cutlist menu to download the cutlist formatted for that machine.
- Download a PDF of the production layoutDownload a PDF of the production layout from the toolbar in the production layout view.
- Download CNC file as a zip and upload it to the machineDownload the CNC file, extract the zip and upload the extracted file to the CNC machine.
- Download countertop information as an Excel fileDownload the countertop information as an Excel file so you can review it or use it further.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Download machine files for a CNC machineDownload the machine files for a CNC machine from its Machine Files download option, and use the menu beside it for DXF output.
- Download optimization XML and label outputsRun optimization to generate an XML file and label outputs, then confirm and download them from the optimization results for downstream machine and production consumption.
- Download project outputs as PDF or XLSGenerate project outputs and download them in either PDF or XLS format, with a single module's output showing panels, hardware, sizes, material and finish.
- Download raw material and hardware requirement sheets separatelyDownload separate requirement sheets for wooden raw materials and hardware raw materials from the production tab.
- Download raw material list as PDF or CSVGet the plan and quantity for each item, then download the raw material list from the MES work order as a PDF or CSV files to hand to the factory team.
- Download saw files, board layouts and panel labelsGet the saw XML, board layout PDFs and panel labels from the published work order.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download saw files, nesting files and panel labelsUse the footer menus to download machine-formatted files and numbered labels for the current scope.
- Download the board layout PDF and cut panels on a tabletDownload the board layout PDF from a published work order to hand to the factory as the cutting instruction, then cut and label each panel on a tablet.
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- ମେସିନ୍ ସେଟଅପ୍ ବିନ୍ୟାସ କିପରି କାମ କରେମେସିନ୍ ସେଟଅପ୍ ଥରେ ବିନ୍ୟାସ ହୋଇ ସମସ୍ତ ଭବିଷ୍ୟତ କାର୍ଯ୍ୟ ପାଇଁ ପୁନଃବ୍ୟବହାର ହେବା କିପରି ହୁଏ ତାହା ଜାଣନ୍ତୁ।
- How the Profile Cutting List and Profile 1D Layout are generatedLearn how the Profile Cutting List is generated from the sizes entered for glass shutters with profiles all around, and how the Profile 1D Layout shows each profile piece cut from the stock length and what remains.
- ଆପଣଙ୍କ କରତ ମେସିନ୍ ସହିତ କଟଲିଷ୍ଟ ଏକ୍ସପୋର୍ଟ ଫର୍ମାଟ୍ ମେଳାନ୍ତୁଏପରି ଏକ କଟଲିଷ୍ଟ ଫାଇଲ୍ ଫର୍ମାଟ୍ ବାଛନ୍ତୁ ଯାହା ଆପଣଙ୍କ କରତ ବ୍ରାଣ୍ଡ ସହିତ କାମ କରୁଥିବା ଜଣା, ଯାହାଫଳରେ ଆମଦାନୀ ହୋଇଥିବା ପ୍ୟାନେଲଗୁଡ଼ିକ ସେମାନଙ୍କର ସଠିକ୍ ଆକାର ରଖିବେ।
- Open the raw materials output and download lists as CSV or PDFOpen the raw materials output from the outputs tab and download the material and hardware lists you need.
- Pull latest Tool and CNC settings from AdminRefresh Tool and CNC settings from the Admin portal into the current work order via Settings.
- ମିସମ୍ୟାଚ୍ ନିର୍ଣ୍ଣୟ କରିବା ପୂର୍ବରୁ ୱାର୍କ ଅର୍ଡରରୁ SAW ଫାଇଲ୍ ନୂଆକରି ପୁନଃ-ଡାଉନଲୋଡ୍ କରନ୍ତୁୱାର୍କ ଅର୍ଡରରୁ SAW ଫାଇଲ୍ ନୂଆକରି ଡାଉନଲୋଡ୍ କରନ୍ତୁ, ଯାହାଫଳରେ ମେସିନ୍ ପୁରୁଣା ଏକ୍ସପୋର୍ଟ ପରିବର୍ତ୍ତେ ବର୍ତ୍ତମାନର ଡିଜାଇନ୍ ଆୟାମ ପଢ଼ିବ।
- ପ୍ରତି କୋଠରୀ ପାଇଁ କଞ୍ଚାମାଲ ପରିମାଣ ଦେଖନ୍ତୁପ୍ରତ୍ୟେକ କୋଠରୀ ପାଇଁ ଏକ ଅଲଗା କାର୍ଯ୍ୟ ପରିସର ସୃଷ୍ଟି କରନ୍ତୁ ଏବଂ Raw Materials ବିଭାଗରେ ସେଗୁଡ଼ିକ ମଧ୍ୟରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- Understand hardware quantities rounded up to whole setsLearn why per-set hardware quantities in the Raw Material list are rounded up and how to check a quantity that looks too high.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.
- Use KD XML format for cutting filesChoose KD XML as the output format when you generate cutting files for cutting operations.
- ପ୍ରତ୍ୟେକ ଉତ୍ପାଦନ ଦଳକୁ କେଉଁ ଆଉଟପୁଟ ଫାଇଲ ଦେବେପ୍ରତ୍ୟେକ ଉତ୍ପାଦନ ଦଳକୁ ଆବଶ୍ୟକ ଆଉଟପୁଟ ଫାଇଲ ଦିଅନ୍ତୁ: କଟିଂ ପାଇଁ XML saw ଫାଇଲ, କ୍ରୟ ପାଇଁ panel material ଏବଂ hardware PDF, ଏବଂ ଆସେମ୍ବଲି ପାଇଁ composite cabinet BQ।
ବୋର୍ଡ ଲେଆଉଟ ଏବଂ ନେଷ୍ଟିଂ69
- ବୋର୍ଡ ଲେଆଉଟ୍ ଏବଂ କଞ୍ଚାମାଲ ରିପୋର୍ଟ ସେୟାର କରନ୍ତୁଏକ ରୋଷେଇଘର ଡିଜାଇନ୍ ପାଇଁ ବୋର୍ଡ ଲେଆଉଟ୍ ଏବଂ କଞ୍ଚାମାଲ ରିପୋର୍ଟ ସେୟାର କରନ୍ତୁ, ଯାହାଦ୍ୱାରା ଆପଣ ପ୍ରତ୍ୟେକ ବୋର୍ଡ ଉପରେ ଥିବା ସଟର ଏବଂ ପ୍ୟାନେଲ ଗଣନା କରିପାରିବେ ଏବଂ କୌଣସିଟି ଅଗଣିତ ରହିନାହିଁ ବୋଲି ନିଶ୍ଚିତ କରିପାରିବେ।
- ପ୍ୟାନେଲ କଟିଂ ପାଇଁ ପ୍ଲାଟଫର୍ମ କିପରି ଏକ ଉତ୍ପାଦନ ବୋର୍ଡ ଲେଆଉଟ୍ ସୃଷ୍ଟି କରେପ୍ୟାନେଲ କଟିଂ ପାଇଁ ଆପଣଙ୍କ ଶପ୍-ଫ୍ଲୋର ଟିମ୍ ଅନୁସରଣ କରିପାରିବା ଭଳି ପ୍ଲାଟଫର୍ମ କିପରି ଏକ ଉତ୍ପାଦନ ବୋର୍ଡ ଲେଆଉଟ୍ ପ୍ରସ୍ତୁତ କରେ ଦେଖନ୍ତୁ।
- Enable stacking per work order and set maximum stack heightTurn on stacking for a work order and set how high boards may stack in its board layouts.
- How the Half / Fractional Sheet Split Gap worksLearn what the Half / Fractional Sheet Split Gap measures, its default value, and which utilization modes enable it.
- How board layout counts boards by material and panel typeLearn how board layout counts boards from the materials and panels defined in the catalogue and lists the requirement for each panel type.
- How grain direction affects board layout optimizationDefine grain direction for each finish so panels are placed according to their grain when the board layout is optimized.
ସବୁ ଦେଖାନ୍ତୁ (69)
- How grain direction affects sheet count in nestingLearn why a grain or directional finish forces panels to nest in a fixed orientation and how that can raise the number of sheets you need.
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Read the legends and review panel details before productionUse the legends and PDFs to check grain direction, grooving, edge bands and material details before cutting.
- Rotate a panel to fit while respecting grain directionFit a panel that does not match the board layout by rotating it, and override its grain direction when vertical grain would block the rotation.
- Set dimension accuracy and compare fractional-sheet wasteChoose the dimension accuracy for the layout output and use the waste percentage to compare layouts.
- Change board size or blade settings to recalculate board requirementChange the board size or blade settings and the board requirement is recalculated.
- Configure small-part rules and the split marginDecide when a part counts as small, how far it stays from sheet edges, and how wide the split margin is.
- Control sheet ordering, fractional sheets and where settings are editedSet sheet ordering, the minimum free length for fractional sheets, and adjust these options from inside a project.
- Download and share the board layout and board summary PDFsTake the board layout and board summary PDFs from the footer and forward the layout to the factory or a manufacturer.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- Edit a work order board layout after generationChange a work order's board layout by hand after it has been generated instead of keeping it locked to the production design it came from.
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- Fix an oversized panel by splitting itSplit an oversized panel in the design portal so it fits the board and is included in the layout.
- Fix grain-direction rotation refusalsCorrect a wrong-running grain at the panel's grain declaration instead of rotating it on the sheet.
- How board layout groups panels into board typesLearn how a design's board layout groups panels into board types and proposes a least-waste layout.
- How fractional sheet settings split a sheetLearn how fractional sheet settings divide a sheet by a set fraction, such as a 250 mm fraction or a 50/50 split of the length.
- How grain flags on finishes control panel rotation in board layoutLearn how a panel's grain requirement comes from the grain flag on its finish and why a grained panel is not allowed to rotate in board layout.
- How stacking height limits stack count in board layoutLearn how the maximum stacking height setting in board layout / MES output determines how many boards fit in one stack.
- How the board-layout margin worksLearn what the board-layout margin defaults to, when it is applied and where you can change it.
- Inspect, move and discard panels in a design's Board LayoutClick a panel to see its Panel info, drag it to move it on the sheet, and use Discard Changes to put the layout back.
- Mark all panels of a cut sheet as tracked in bulk from board layoutMark every panel on a cut sheet as tracked in one action when the operator has not scanned each panel individually.
- Optimize board layouts for units automaticallyLet the software calculate board layouts and wastage for units such as vanities and wardrobes, with the option to adjust manually.
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- Read panel codes and labels on a board layoutEach panel on a board layout carries a panel code and a label, so the operator can paste the correct label on the correct panel after cutting.
- Regenerate board layout after turning off panelsTurn off all panels except the top and shutter panels, then regenerate the board layout so the shutter panels get their own separate layout.
- Set the cutting type and optimisation criteria for board layoutsChoose straight cuts or nesting, then tune recuts, optimisation criteria and stacking for the layout.
- Troubleshoot a stopped cutting job and read sticker codesCheck margins and saw width when a cutting job stops, and see how the sticker material code is built.
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- କଟିଂ ଗଣନାରେ ବୋର୍ଡ ଆକାର ଏବଂ ବ୍ଲେଡ ମୋଟେଇ ବୁଝନ୍ତୁଡିଫଲ୍ଟ ଭାବରେ ଉଭୟ ପାର୍ଶ୍ୱରେ 10 mm ଟ୍ରିମିଂ ପାଇଁ ବୋର୍ଡ ଆକାର କିପରି ହିସାବ କରେ ଏବଂ କଟିଂ ଗଣନା ପାଇଁ ବ୍ଲେଡ ମୋଟେଇ ଅଲଗା ଭାବରେ କିପରି ଦିଆଯାଏ ତାହା ଜାଣନ୍ତୁ।
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- ଏକ କଟ୍ ଲିଷ୍ଟ ଅପ୍ଟିମାଇଜେସନ୍ ଲକ୍ଷ୍ୟ ବାଛନ୍ତୁସର୍ବନିମ୍ନ ସାମଗ୍ରୀ, ସର୍ବନିମ୍ନ ପ୍ରକ୍ରିୟାକରଣ ସମୟ କିମ୍ବା ସନ୍ତୁଳିତ ବାଛନ୍ତୁ, ତାପରେ ଅପ୍ଟିମାଇଜ୍ ହୋଇଥିବା ଲେଆଉଟ୍ ସୃଷ୍ଟି କରିବା ପାଇଁ ଏହାକୁ ଲାଗୁ କରନ୍ତୁ।
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- Choose the optimisation criterion per sheet typePick a criterion for each sheet type, or apply one to all with the Overall row, then continue without recomputing.
- Choose the room and download scope for board layout filesOpen the board layout for one room and set the screen level that decides which panels a download covers.
- Clear an oversized panel violationClear an oversized panel violation either by splitting the panel to the available height or by entering the correct board dimensions in the board layout settings.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Enable minimum distance from edge for laminate border allowanceTurn on the minimum distance from edge setting so laminate border allowance is applied around the panel and set the maximum length of the smaller side in the same settings.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix grain-alignment violation by rotating finish 90 degrees at panel levelRotate the finish 90 degrees at panel level so the panel aligns itself to the vertical grain and the violation clears.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- ବ୍ଲେଡ୍ ମୋଟେଇ କିପରି ଟ୍ରିମ୍ ମାର୍ଜିନରୁ ଅଲଗା ଭାବରେ ଗଣନା କରାଯାଏକଟ୍ଗୁଡ଼ିକ ମଧ୍ୟରେ ବ୍ଲେଡ୍ (କର୍ଫ) ମୋଟେଇ ଏକ ଅଲଗା ଭତ୍ତା ଭାବରେ କିପରି ପ୍ରୟୋଗ କରାଯାଏ ଏବଂ ଅବଶିଷ୍ଟ ପରିମାଣକୁ କିପରି ବିବେଚନା କରାଯାଏ ତାହା ଜାଣନ୍ତୁ।
- Inspect a composite sheet and keep the board remainderOpen a composite sheet to see its core material and combined pieces, and keep the unused board remainder for other projects.
- Read the Optimization Statistics modal after a comparison runRun the layout with Decide after Comparison and read each sheet type's sheet count, processing time and offcut figures.
- ଲେଆଉଟ୍ ତ୍ରୁଟି ଥିବା ସିଟ୍ଗୁଡ଼ିକ ପାଇଁ ରିକଟ୍ ସୀମାକୁ 1 କିମ୍ବା 2 କୁ କମାଇ ଦିଅନ୍ତୁକେବଳ ସେହି ସିଟ୍ଗୁଡ଼ିକ ପାଇଁ ରିକଟ୍ ସୀମା କମାଇ ଦେଇ, ଯେଉଁ ସିଟ୍ଗୁଡ଼ିକର ପ୍ୟାନେଲ୍ ଓଭରଲ୍ୟାପ୍ ହେଉଛି କିମ୍ବା ବୋର୍ଡ ବାହାରକୁ ଯାଉଛି, ସେଗୁଡ଼ିକୁ ଠିକ୍ କରନ୍ତୁ।
- ଅଫକଟଗୁଡ଼ିକୁ ପ୍ୟାନେଲ ଭାବରେ ଯୋଡ଼ି ପୁନଃବ୍ୟବହାର କରନ୍ତୁବଞ୍ଚିଥିବା ଏକ ଅଫକଟ ବୋର୍ଡକୁ ପ୍ୟାନେଲ କିମ୍ବା କୋଡ୍ ଭାବରେ ଯୋଡ଼ନ୍ତୁ, ଯାହାଫଳରେ ଏହା ପରବର୍ତ୍ତୀ ପ୍ରୋଜେକ୍ଟରେ ବ୍ୟବହାର ହୋଇପାରିବ।
- Set board sizes, quantities and force useGive each board size its available sheet count and mark the sizes the optimizer must consume.
- କଟ୍-ଲିଷ୍ଟ ଆକାରଗୁଡ଼ିକୁ ରାଉଣ୍ଡ ଅଫ୍ କରିବା ପାଇଁ ଆକାର ସଠିକତାକୁ 1 mm ରେ ସେଟ୍ କରନ୍ତୁଆକାର ସଠିକତାକୁ 1 mm ରେ ସେଟ୍ କରନ୍ତୁ, ଯାହାଫଳରେ ସିଷ୍ଟମ ଗଣନା କରାଯାଇଥିବା ଆକାରଗୁଡ଼ିକୁ ପୂର୍ଣ୍ଣ ମିଲିମିଟରକୁ ରାଉଣ୍ଡ କରିବ ଏବଂ ଉଦ୍ଦିଷ୍ଟ ପ୍ୟାନେଲ୍ ଆକାର ସହିତ ମେଳ ଖାଇବ।
- Set margins, blade thickness and saw widthSet the board margins and saw blade allowance so cutting jobs run with the right values.
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
- Edit Layout ରେ ଏକ ଚୟନିତ ପ୍ୟାନେଲ ରଖିବା ସମୟରେ ସିଟ୍ ପରିବର୍ତ୍ତନ କରନ୍ତୁଏକ ବୋର୍ଡ ପ୍ରକାରର ସିଟ୍ ମଧ୍ୟରେ ଯିବା ଏବଂ ଆପଣ ଉଠାଇଥିବା ପ୍ୟାନେଲକୁ ଆପଣ ବାଛିଥିବା ସିଟ୍ ଉପରେ ରଖିବା ପାଇଁ ବ୍ରେଡକ୍ରମ୍ବର ସିଟ୍ ମେନୁ ଖୋଲନ୍ତୁ।
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand optimization after a material changeLearn what happens to optimization when core or finish materials are changed in a design.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Understand why cut-list labels and board layouts show different sizesLearn why a cut-list label shows a size with decimals while the board layout shows rounded whole numbers.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- View a board's layout with labelsClick an individual board to see its layout with labels.
ପ୍ୟାନେଲ ଲେବଲ ଏବଂ ଷ୍ଟିକର35
- How panel labels and QR codes work in productionLearn what panel labels carry and how their QR codes drive CNC file lookup and order tracking.
- ଆଉଟପୁଟ୍ ଲେବଲ୍, ପେଷ୍ଟିଂ ରିପୋର୍ଟ ଏବଂ ଆସେମ୍ବଲି ଦୃଶ୍ୟଦୁକାନ ମହଲା ପାଇଁ ପ୍ରିଣ୍ଟ ଶିଟ୍ ଏବଂ ପ୍ୟାନେଲ୍ ଲେବଲ୍, ପେଷ୍ଟିଂ ରିପୋର୍ଟ ଏବଂ ଏକ୍ସପ୍ଲୋଡେଡ୍ ଆସେମ୍ବଲି ଦୃଶ୍ୟ।
- Select the correct machine type when downloading panel labelsChoose the machine type that matches your CNC machine when downloading panel labels so the QR code starts the correct operations.
- Track work order progress by scanning panel label QR codesScan the QR code on a panel label to track a work order's progress through factory stations and mark completion at each scanned stage.
- Add separate QR codes for top and bottom programs on HOMAG CNC labelsGive a HOMAG CNC panel label separate QR codes for the top machining program and the bottom machining program.
- ପ୍ୟାନେଲ ଲେବଲରେ ବାରକୋଡ ଐଚ୍ଛିକ ଏବଂ ଟ୍ରାକିଂ ପାଇଁ ବ୍ୟବହୃତ ହୁଏପ୍ୟାନେଲ ଲେବଲରେ ବାରକୋଡ ବାଧ୍ୟତାମୂଳକ ନୁହେଁ ଏବଂ ଏହା ଟ୍ରାକିଂ ପାଇଁ ବ୍ୟବହୃତ ହୁଏ, ତେଣୁ ଟ୍ରାକିଂ ଆବଶ୍ୟକ ନଥିଲେ ଆପଣ ବାରକୋଡ କ୍ଷେତ୍ର ହଟାଇ ଲେବଲର ଆକାର କମାଇ ପାରିବେ।
ସବୁ ଦେଖାନ୍ତୁ (35)
- How panel label defaults are setLearn the default panel label size and border the platform uses.
- Make panel labels visible in the design portalPublish the design so its panel labels for the cut list become visible, without opening the cut list.
- Read panel codes to identify carcass and unitPanel identifiers in production output make it easy to see which carcass a panel belongs to and which unit has to be cut, so a specific unit can be picked out quickly during cutting.
- ଏକ ମେସିନ ପାଇଁ ପ୍ୟାନେଲ ଲେବଲ ଘୂର୍ଣ୍ଣନ ଚାଲୁ କରନ୍ତୁପ୍ରତି-ମେସିନ ସେଟିଂ ସକ୍ଷମ କରନ୍ତୁ ଯାହାଫଳରେ ସେହି ମେସିନର ଆଉଟପୁଟରେ ଘୂର୍ଣ୍ଣିତ ପ୍ୟାନେଲ ଲେବଲ ରହିବ।
- Add edge band code, final size and material info to production labelsExtend production labels to show the edge band code, final panel size and internal and external material information.
- Choose which box label template a work order printsSet the default box label template for one work order so its labels print in the layout that client or project needs.
- Create a custom label template based on printer and sticker sizeCreate a custom label template, set your sticker size, choose the information fields to print, then update it and set it as default.
- Create, rename, update and default panel and box label templatesManage the org's panel and box label templates, from creating and customising them to setting the org-wide default.
- ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ ଭାବରେ ପ୍ୟାନେଲ୍ ଲେବଲ୍ ଡାଉନଲୋଡ୍ କରନ୍ତୁପ୍ୟାନେଲ୍ ଲେବଲ୍ ଗୁଡ଼ିକ ଡାଉନଲୋଡଯୋଗ୍ୟ ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ଗୁଡ଼ିକ ମଧ୍ୟରୁ ଗୋଟିଏ ଭାବରେ ତିଆରି ହୁଏ।
- Enable loading order and premilling-by-side in sticker templateTurn on loading order and premilling by side in the sticker template so the sticker shows which side faces up and the premilling value per edge.
- Filter and report progress per operationCombine station and tracking-status filters and enable show detailed progress to see per-operation completion.
- ବକ୍ସ ଲେବଲରେ ଅନୁପସ୍ଥିତ ଥିବା ସଂସ୍ଥା ଲୋଗୋ ଠିକ୍ କରନ୍ତୁଲେବଲ ପୁନଃ ଜେନେରେଟ୍ କରି କିମ୍ବା ଲୋଗୋ କନଫିଗରେସନ୍ ଏବଂ ଟେମ୍ପଲେଟ୍ ଲେୟର ଯାଞ୍ଚ କରି ବକ୍ସ-ଲେବଲ ପ୍ରିଭ୍ୟୁ ଏବଂ ପ୍ରିଣ୍ଟେଡ୍ PDFରେ ସଂସ୍ଥା ଲୋଗୋ ଦେଖାଇବା ପାଇଁ କରନ୍ତୁ।
- ଅର୍ଗ ଲୋଗୋ ଏବଂ ନକଲ QR ମଧ୍ୟରେ ବିବାଦ ଥିବା ପ୍ୟାନେଲ ଲେବଲ ଠିକ କରନ୍ତୁଅର୍ଗ ଲୋଗୋ ଏବଂ ନକଲ ପ୍ୟାନେଲ QR ଉଭୟ ଏକ ପ୍ୟାନେଲ ଲେବଲରେ କାହିଁକି ପ୍ରିଣ୍ଟ ହୋଇପାରିବ ନାହିଁ, ଏବଂ ଲେବଲ ଲେଆଉଟ ଓ ଏକ୍ସପୋର୍ଟରୁ କଣ ଆଶା କରିବେ ଜାଣନ୍ତୁ।
- ବକ୍ସ ଡିଲିଟ କରିବା ପରେ ଛାଡ଼ିଯାଉଥିବା ବକ୍ସ ନମ୍ବର ଠିକ କରନ୍ତୁଏକ ବକ୍ସ ଡିଲିଟ କରି ଏହାର ପ୍ୟାନେଲଗୁଡ଼ିକୁ un-packed pool କୁ ଫେରାନ୍ତୁ, ତାପରେ ଆନୋଟେସନ ପୁନଃନିର୍ଦ୍ଦିଷ୍ଟ କରନ୍ତୁ ଯାହାଫଳରେ ଅବଶିଷ୍ଟ ବକ୍ସଗୁଡ଼ିକ କ୍ରମିକ ଭାବରେ ନାମିତ ହେବ।
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Fix user component annotation labels that cannot be changedUser component annotations are auto-labelled, so their labels cannot be edited.
- ପ୍ୟାନେଲ ଲେବଲଗୁଡ଼ିକୁ ସ୍ୱୟଂଚାଳିତ ଭାବରେ ତିଆରି କରନ୍ତୁ ଏବଂ ପ୍ରିଣ୍ଟ କରନ୍ତୁଏକ ଲେବଲ ଲେଆଉଟ ସେଟ ଅପ କରନ୍ତୁ, ଅନ୍ତର୍ଭୁକ୍ତ କରିବାକୁ ପ୍ୟାନେଲ ଡାଟା ବାଛନ୍ତୁ, ତାପରେ board layout ଫିଚରରୁ ଲେବଲଗୁଡ଼ିକୁ ଡାଉନଲୋଡ ଏବଂ ପ୍ରିଣ୍ଟ କରନ୍ତୁ।
- How panel stickers carry a CNC barcode alongside the scan QR codeLearn how the panel sticker can carry a barcode for the CNC machine in addition to the QR code used for scan tracking, and how a setting switches the machine-file field between a barcode and a QR code.
- ସିଟ୍ ଲେବଲ୍ଗୁଡ଼ିକ କିପରି କାମ କରେସାମଗ୍ରିକ ସିଟ୍ କ୍ରମରେ ପ୍ରତ୍ୟେକ ସିଟ୍ କିପରି ନିଜର ଲେବଲ୍ ପାଏ ତାହା ଜାଣନ୍ତୁ।
- ଡିଜାଇନ ପୋର୍ଟାଲରେ ପ୍ରକାଶ କରିବା ପରେ ପ୍ୟାନେଲ ଲେବଲଗୁଡ଼ିକ ଦୃଶ୍ୟମାନ କରନ୍ତୁପ୍ୟାନେଲ ଲେବଲଗୁଡ଼ିକ ଦୃଶ୍ୟମାନ ହେବା ପାଇଁ ଆପଣଙ୍କ ଡିଜାଇନକୁ ଡିଜାଇନ ପୋର୍ଟାଲରେ ପ୍ରକାଶ କରନ୍ତୁ।
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Read edge band thickness on the panel labelThe panel label prints the edge band thickness as a number on the side of the diagram where that banding applies, so shop-floor staff see it at a glance.
- Read the external and internal finish on a panel labelOpen the panel label to see which side of a panel carries the external finish and which carries the internal finish.
- Save label printing format files to drive for automatic retrievalLabel creation requires cut sizes, finish sizes, operations, edge banding thickness, and panel indicators.
- Scan panel labels to detect the correct CNC filePanel labels include a barcode that a CNC machine scans to detect the correct file for that panel.
- Show edgeband face grooving on panel labelsShow grooving information on panel labels in addition to the board layout view.
- ବକ୍ସ ଲେବଲରେ ସଂସ୍ଥାର ଲୋଗୋ ଦେଖାନ୍ତୁ ଏବଂ ଏହାର ସ୍ଥିତି ବାଛନ୍ତୁଏକ ବକ୍ସ ଲେବଲ ଟେମ୍ପଲେଟରେ ସଂସ୍ଥାର ଲୋଗୋ ଚାଲୁ କରନ୍ତୁ ଏବଂ ଏହା କେଉଁଠି ରହିବ ତାହା ବାଛନ୍ତୁ, କେଉଁ ଲୋଗୋ ବ୍ୟବହୃତ ହେଉଛି ଏବଂ ପୃଷ୍ଠାଗୁଡ଼ିକରେ ଏହା କିପରି ଆଚରଣ କରେ ତାହା ଜାଣନ୍ତୁ।
- Understand offcut management in productionLearn that offcut management is not currently available in production and that labels are generated only for panels accounted for in a project.
- Update the sticker template after changing sticker settingsLearn how the sticker template controls which information appears on the sticker and can be switched on or off per field.
CNC ଏବଂ CAM ଅପରେସନ65
- CNC ପାଇଁ ପ୍ୟାନେଲ କଟଆଉଟ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଅପରେସନ ପ୍ରକାର ଓ ଟୁଲ ନିର୍ଦ୍ଦିଷ୍ଟ କରନ୍ତୁପ୍ୟାନେଲର ବାହ୍ୟ ପୃଷ୍ଠରେ ଏକ ନିଚ୍ ତିଆରି କରନ୍ତୁ, ଏହାର କଟ ଗଭୀରତା ଓ ଅପରେସନ ପ୍ରକାର ସେଟ କରନ୍ତୁ, ଏବଂ ଏହାକୁ CNC ଆଉଟପୁଟ ପାଇଁ ଉପଲବ୍ଧ କରାନ୍ତୁ।
- CAM ଆଉଟପୁଟରେ ବ୍ୟାକ୍-ପ୍ୟାନେଲ ଗ୍ରୁଭ୍ କେବେ ଦେଖାଯାଏ ତାହା ବୁଝନ୍ତୁଇନସେଟ୍ ବ୍ୟାକ୍ ପ୍ୟାନେଲଗୁଡ଼ିକ ଚାରିପାଖର ପ୍ୟାନେଲଗୁଡ଼ିକରେ କିପରି ଗ୍ରୁଭ୍ ଅପରେସନ୍ ସୃଷ୍ଟି କରେ ଏବଂ କେଉଁ ପସନ୍ଦ ଓ ମେସିନ୍ ସେଟିଂସ୍ ସେହି ଗ୍ରୁଭ୍ଗୁଡ଼ିକ CAM/MES ଆଉଟପୁଟକୁ ଯିବ କି ନାହିଁ ଓ କିପରି ଯିବ ତାହା ନିର୍ଣ୍ଣୟ କରେ, ତାହା ଶିଖନ୍ତୁ।
- CAM ଅପରେସନ୍ ଯୋଡ଼ନ୍ତୁ: CAM ରେ include ଚିହ୍ନଟ କରି, ପ୍ରକାର, ଗଭୀରତା ଏବଂ ଟୁଲ୍ ଦିଅନ୍ତୁଏକ ଡିଜାଇନ୍ ଫିଚରକୁ CAM ରେ include ଚିହ୍ନଟ କରି ମେସିନକୁ ପଠାନ୍ତୁ, ତାପରେ ଏହାର କଟ୍ ପ୍ରକାର, ଗଭୀରତା ଏବଂ ପସନ୍ଦର ଟୁଲ୍ ସେଟ୍ କରନ୍ତୁ।
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- Cut a curved or arched panel from a final-size panelStart with a panel already at its final dimensions and cut the curve out of it to produce a curved or arched panel.
- CIX ଆଉଟପୁଟ ପାଇଁ Biesse Works ସମର୍ଥନ ସକ୍ରିୟ କରନ୍ତୁମେସିନ ସେଟିଂସରେ Biesse Works ସମର୍ଥନ ସକ୍ରିୟ କରନ୍ତୁ, ଯାହାଫଳରେ ଆପଣଙ୍କ Biesse CNC ମେସିନ ସୃଷ୍ଟି ହୋଇଥିବା CIX ଆଉଟପୁଟକୁ ସଠିକ୍ ଭାବରେ ପଢ଼ିପାରିବ।
ସବୁ ଦେଖାନ୍ତୁ (65)
- CAM କାର୍ଯ୍ୟକଳାପରେ ଟ୍ରିମିଂ ବନାମ ପକେଟିଂଟ୍ରିମିଂ କିପରି ସମଗ୍ର ଏକ ଅଞ୍ଚଳରେ ପଦାର୍ଥ ହଟାଏ ଏବଂ ପକେଟିଂ ଏକ ପରିସୀମା ଭିତରେ ନିର୍ଦ୍ଦିଷ୍ଟ ସ୍ଥାନ ଖୋଦନ କରେ, ତାହା ଜାଣନ୍ତୁ।
- Configure CNC machine type and tool data before downloading outputSet the machine type by drilling faces, add the routing and saw tools, then save and download the CNC output.
- Force a tool and finish adding a CNC machineMap drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- Set routing line tool position L, R or C for cut alignmentClick a routing line to see the tool position with L, R and C options, specify a preferred tool, and check the panel preview by selecting the machine instead of raw view.
- Create custom cuts in edit panel design and include them in CAMDraw and offset a custom shape on a panel, define it as a cut with a depth, and enable the include in CAM option so the machining reaches the CNC files.
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Enable Include in CAM to push panel operations to productionTurn on Include in CAM when adding a panel operation so it reaches production, then choose the operation type, tool and tool number.
- Enter saw tool name, thickness and axis for back-panel groovingAdd a saw tool row in the CNC machine settings so back-panel grooving operations carry the right tool name, thickness and axis.
- ପସନ୍ଦିତ ଟୁଲ୍ ଚୟନ କିପରି ମେସିନ୍ ବିଟ୍ ସହିତ ମାନଚିତ୍ରିତ ହୁଏ2D CAM ମୋଡରେ ଏକ କଟ୍ ପାଇଁ ଆପଣ ବାଛିଥିବା ପସନ୍ଦିତ ଟୁଲ୍ କେଉଁ ମେସିନ୍ ବିଟ୍ ତାହା ସମ୍ପାଦନ କରେ ତାହା କିପରି ନିର୍ଣ୍ଣୟ କରେ ତାହା ଜାଣନ୍ତୁ।
- Set back panel grooving methodChoose whether back panel grooves are cut by sawing or routing.
- Set the preferred router tool for back panel groovesSet the default router tool for the Back Panel Groove operation in a CNC machine's settings, choosing from tools identified by name, diameter and axis.
- ଡ୍ରିଲିଂ ଫାଇଲ ଡାଉନଲୋଡ କରିବାକୁ ସେଟିଂସରେ ଏକ CNC ମେସିନ ଯୋଡନ୍ତୁଡ୍ରିଲିଂ ଫାଇଲ ଏବଂ DXF ଡାଉନଲୋଡ କରିବା ପାଇଁ Settings > Machine ରେ ଏକ CNC ମେସିନ ଯୋଡନ୍ତୁ।
- Add CNC tools that match the machineEnter every tool the job uses with names and numbers that match the machine so CNC output can be matched and downloaded.
- Check a tool's type in machine settingsLook up the type assigned to each tool in machine settings to see why a routing tool cannot be listed as a sawing tool.
- Configure CNC machine as 5-face process with panel flipEnter only the saw tool details, including the tool name and thickness, in the machine settings.
- ଡ୍ରିଲିଂ ଫେସ ସଂଖ୍ୟା ଅନୁସାରେ CNC ମେସିନ ପ୍ରକାର ବିନ୍ୟାସ କରନ୍ତୁଆପଣଙ୍କ ମେସିନ କେତେ ଫେସ ଡ୍ରିଲ କରେ ସେହି ଅନୁସାରେ CNC ମେସିନ ସେଟିଂସରେ ମେସିନ ପ୍ରକାର ସେଟ କରନ୍ତୁ।
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- ପ୍ୟାନେଲରେ ପାରାମେଟ୍ରିକ୍ ପକେଟ୍ ଏବଂ ଡଗ୍-ବୋନ୍ କଟ୍ଆଉଟ୍ ସୃଷ୍ଟି କରନ୍ତୁପ୍ୟାନେଲ ମୁହଁରେ ପକେଟ୍ ମେସିନ୍ କରନ୍ତୁ, ସେଗୁଡ଼ିକୁ ପାରାମେଟ୍ରିକ୍ ଭାବରେ ଆକାର ଦିଅନ୍ତୁ, ଏବଂ ଡଗ୍-ବୋନ୍ ଓ ଭୂସମାନ୍ତର କଟ୍ଆଉଟ୍ ପାଇଁ ରାଉଟିଂ ବ୍ୟବହାର କରନ୍ତୁ।
- CAM ସେଟିଂସ୍ରେ ଗ୍ରୁଭ୍ ଗଭୀରତା ସହନଶୀଳତା କିପରି କଟ୍-ଲିଷ୍ଟ ଗ୍ରୁଭ୍ ସଠିକତାକୁ ନିୟନ୍ତ୍ରଣ କରେଏକ ପ୍ୟାନେଲ୍ର 2D/CAM ଦୃଶ୍ୟରେ ଦେଖାଯାଉଥିବା ଗ୍ରୁଭ୍ ଗଭୀରତାରେ ସିଷ୍ଟମ୍-ଯୋଡ଼ା ସହନଶୀଳତା କିପରି ଅନ୍ତର୍ଭୁକ୍ତ ହୁଏ ଏବଂ ଏହାକୁ କେଉଁଠାରେ ବିନ୍ୟାସ କରିବେ ତାହା ଜାଣନ୍ତୁ।
- Include side panel cuts in CAM outputInclude the panel cuts on the sides of a cabinet in the CAM output.
- Machine radius panels and grooving by editing panel constructionEdit the panel design at the construction level and apply the required tools and operations so the application generates the machine instructions automatically.
- Output top and bottom drilling in one CNC fileTurn off the Separate Top Bottom Files setting on a CNC machine so it outputs a single file containing both top and bottom drilling.
- Restrict a panel area from grooving or drilling via clamping obstructionDefine a restricted rectangular area on a panel in the Clamping Obstructions table so the software rotates the panel when a groove or drilling operation falls inside it.
- Set up a CNC machine with its machine type and settingsUse the Add Machine option and fill in the machine type and the settings the setup stores per machine.
- CNC ଆଉଟପୁଟରେ ପ୍ୟାନେଲଗୁଡ଼ିକ କାହିଁକି ଘୂର୍ଣ୍ଣିତ ହୋଇ ଆସନ୍ତି (କିମ୍ବା ଆସନ୍ତି ନାହିଁ)Always Rotate ସେଟିଂ, Maximum Machine Depth ଏବଂ Min Panel Width କିପରି ସ୍ଥିର କରେ ଯେ CNC ଆଉଟପୁଟରେ ଏକ ପ୍ୟାନେଲ ଘୂର୍ଣ୍ଣିତ ହେବ କି ନାହିଁ, ଏବଂ ଡ୍ରିଲିଂ ମିରର ହୋଇଗଲେ କିମ୍ବା ଭୁଲ ଧାରରେ ପଡ଼ିଲେ କଣ ଯାଞ୍ଚ କରିବେ ତାହା ଜାଣନ୍ତୁ।
- 2D Panel CAM Mode ରେ ଏକ drill ଯୋଡ଼ନ୍ତୁ ଏବଂ ସମ୍ପାଦନ କରନ୍ତୁ2D Panel CAM Mode ରେ ଏକ panel ରେ drill ଯୋଡ଼ନ୍ତୁ ଏବଂ ଏହାର position, steps ଏବଂ machine depth settings ସମ୍ପାଦନ କରନ୍ତୁ।
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- ମେସିନ୍ ସାଇଡ୍-ସ-ଟୁଲ୍ ତାଲିକାରେ ସ-ବ୍ଲେଡ୍ ଟୁଲ୍ ଧାଡ଼ି ଯୋଡ଼ନ୍ତୁସ-କାଟିବା କାର୍ଯ୍ୟ ମେସିନରେ ଚାଲିପାରିବା ପାଇଁ ଏହାର ନାମ ଓ ବ୍ଲେଡ୍ ମୋଟେଇ ସହିତ ଏକ ସ-ବ୍ଲେଡ୍ ଟୁଲ୍ ଧାଡ଼ି ଯୋଡ଼ନ୍ତୁ।
- Back panel grooves cut end-to-end in generated MPR filesLearn how back-panel grooves defined end-to-end in the design carry through to the generated MPR file and match the drawings on the MES portal.
- Check CAM hole depth in panel 2D CAM modeOpen the panel in 2D view and enter CAM mode to verify hole markings such as drawer channel or tandem depths.
- ଏକ ଡ୍ରଇଂ ଡାଉନଲୋଡ୍ କରିବା ସମୟରେ କ୍ଲାମ୍ପିଂ-ଅଞ୍ଚଳ ଚେତାବନୀ ଯାଞ୍ଚ କରନ୍ତୁଏକ ୱାର୍କ ଅର୍ଡର ପାଇଁ ଏକ ଡ୍ରଇଂ କିମ୍ବା ମେସିନ୍ ଫାଇଲ୍ ଡାଉନଲୋଡ୍ କରନ୍ତୁ ଏବଂ ଦେଖନ୍ତୁ କେଉଁ ଅପରେସନଗୁଡ଼ିକ ପ୍ରତିବନ୍ଧିତ କ୍ଲାମ୍ପିଂ ଅଞ୍ଚଳ ଭିତରେ ପଡ଼େ।
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose a panel cutting strategy for CNC productionUse the panel-by-panel strategy for CNC cutting and avoid the single-step strategy when two panels are involved.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- Download and check CNC machine files before productionDownload the CNC output from the published work order, load it into the machine and verify it against the machine type.
- Download CNC machine output drawingsDownload drawings from the CNC machine output that show every panel with its machining details, using reference letters A, B, C and D to determine positions and depth.
- Draw the path before exiting to 3D view for the sweep toolDraw the sweep path before you exit to the 3D view, because the sweep cannot be applied without a defined path.
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Find the download buttons on a work order's CNC Machining tabLocate the Drawing and Machine Files buttons on each machine card and know which formats each machine offers.
- CAM ଗ୍ରୁଭ୍ ଲମ୍ବ ସହନଶୀଳତା ସମାୟୋଜନ କରି ଗ୍ରୁଭ୍ ଠିକ୍ ଭାବରେ କଟା ନହେବା ସମସ୍ୟା ଠିକ୍ କରନ୍ତୁଉତ୍ପାଦନ ଫାଇଲରେ ଗ୍ରୁଭ୍ ଠିକ୍ ଭାବରେ ଆସିବା ପାଇଁ ଆଡମିନ CAM ସେଟିଂସରେ ଗ୍ରୁଭ୍ ଲମ୍ବ ସହନଶୀଳତାକୁ ବିଟ୍ ବ୍ୟାସର ଅଧା ରଖନ୍ତୁ।
- Fix missing routing or drill tools in CAM outputAdd the referenced tools and refresh the cache so regenerated CAM output includes every tool the job uses.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- CNC ଆଉଟପୁଟ୍ ସୃଷ୍ଟି କରିବା ସମୟରେ ଟୁଲ୍ ଭିନ୍ନ ହୋଇପାରେ ଚେତାବନୀ ସମ୍ଭାଳନ୍ତୁCNC ଆଉଟପୁଟ୍ ସୃଷ୍ଟି କରିବା ସମୟରେ "tool may be different" ଚେତାବନୀ କାହିଁକି ଦେଖାଯାଏ ଏବଂ ଭୁଲ ଟୁଲ୍ ଚୟନ ହେଲେ ଟୁଲ୍ ମ୍ୟାପିଂ ପସନ୍ଦକୁ କିପରି ସଂଶୋଧନ କରିବେ ତାହା ଜାଣନ୍ତୁ।
- Infurnia ର .nc G-code କିପରି ସୀମିତ: R-arcs, cutter comp ନାହିଁ, mm absoluteInfurnia ର ଛୋଟ G-code dialect ର ସ୍ଥିର ନିୟମଗୁଡ଼ିକ ଜାଣନ୍ତୁ, ଯାହାଦ୍ୱାରା ଆପଣ ଜାଣିପାରିବେ ଏହାର .nc output ଆପଣଙ୍କ controller ଉପରେ କଣ ପ୍ରକାଶ କରିପାରିବ ଏବଂ କଣ ନୁହେଁ।
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଗ୍ରୁଭ୍ ଗଭୀରତା କିପରି ସେଟ୍ ଏବଂ ଯାଞ୍ଚ କରାଯାଏଏକ ଷ୍ଟ୍ରିପ୍-ଲାଇଟ୍ SKU ର ଗ୍ରୁଭ୍ ଗଭୀରତା ଏକ ପ୍ୟାନେଲ୍ ଗ୍ରୁଭ୍ ହେବ କି ନାହିଁ, କେତେ ଗଭୀର ହେବ, ଏବଂ CAM ଆଉଟପୁଟ୍ରେ ଫଳାଫଳ କିପରି ଯାଞ୍ଚ କରାଯିବ ତାହା ଜାଣନ୍ତୁ।
- Biesse CIX ଫାଇଲଗୁଡ଼ିକରେ ORLST ଉତ୍ସ କିପରି ଚୟନ କରାଯାଏପ୍ରତ୍ୟେକ ପ୍ୟାନେଲ ପାଇଁ Infurnia କିପରି ORLST ବେଡ୍ ଉତ୍ସ ଚୟନ କରେ ତାହା ଜାଣନ୍ତୁ — Default Machine Origin କିମ୍ବା ରେଞ୍ଜ୍-ଆଧାରିତ ଉତ୍ସ ଟେବୁଲରୁ।
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- ମେସିନ ବ୍ଲେଡ ଚଉଡ଼ା ସହିତ ସ ଚଉଡ଼ା ମେଳାନ୍ତୁବୋର୍ଡ ଲେଆଉଟ ସଠିକ ରହିବା ପାଇଁ ୱାର୍କ ଅର୍ଡରରେ ସ ଚଉଡ଼ାକୁ କଟିଂ ମେସିନର ପ୍ରକୃତ ବ୍ଲେଡ ଚଉଡ଼ା ସହିତ ସେଟ କରନ୍ତୁ ଏବଂ ସ ଫାଇଲ ପୁନଃ ସୃଷ୍ଟି କରନ୍ତୁ।
- ୟୁନିଟ୍ ନିକଟତା (C1, C2, C3) ଅନୁସାରେ CNC ଫାଇଲ୍ଗୁଡ଼ିକର ନାମ ଦିଅନ୍ତୁବାରକୋଡ୍ରେ CNC ଫାଇଲ୍ଗୁଡ଼ିକର ନାମ ଦେବା ସମୟରେ C1, C2 ଏବଂ C3 ପରି ୟୁନିଟ୍ ନିକଟତା ଲେବଲ୍ ବ୍ୟବହାର କରନ୍ତୁ, ଯାହାଫଳରେ ପ୍ରକଳ୍ପଗୁଡ଼ିକରେ ସମାନ ନାମକରଣ ଧାରଣା ସ୍ଥିର ରହିବ।
- ଅତି ବଡ଼ Biesse ପ୍ୟାନେଲ ପାଇଁ ପ୍ରତି origin ର Maximum Machine Depth ଓଭରରାଇଡ କରନ୍ତୁଏକ ନିର୍ଦ୍ଦିଷ୍ଟ origin ଧାଡ଼ିକୁ ନିଜର ଅଧିକ Maximum Machine Depth ଦିଅନ୍ତୁ, ଯାହାଫଳରେ ଅତି ବଡ଼ ପ୍ୟାନେଲ କେବଳ ସେଠାରେ ଗ୍ରହଣ କରାଯିବ।
- Set onion-skin passes and through-cut ordering in nesting NC programsControl whether through-cuts are machined in one pass or two, and know that they always run last in the program.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- ଯେତେବେଳେ ଏକ ମେସିନ ଡିଫଲ୍ଟକୁ ଅଗ୍ରାହ୍ୟ କରେ, ସେତେବେଳେ ବିକଳ୍ପ MPR ଫର୍ମାଟଗୁଡ଼ିକ ଚେଷ୍ଟା କରନ୍ତୁଯେତେବେଳେ ଏକ ମେସିନ ପ୍ଲାଟଫର୍ମର MPR କୁ ସଠିକ୍ ଭାବରେ ପଢ଼ି ପାରେ ନାହିଁ, ସେତେବେଳେ ଅନ୍ୟ ସମର୍ଥିତ MPR ପ୍ରକାରଗୁଡ଼ିକ ଚେଷ୍ଟା କରନ୍ତୁ ଏବଂ ମେସିନ ବିକ୍ରେତାଠାରୁ ଏକ ଜଣା-କାର୍ଯ୍ୟକାରୀ ଉଦାହରଣ ଫାଇଲ ନିଅନ୍ତୁ।
- Panel 2D CAM ସମ୍ପାଦନା ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ ଉପରେ କିପରି ପ୍ରଭାବ ପକାଏ ତାହା ବୁଝନ୍ତୁPanel 2D CAM ମୋଡ୍ ଆପଣଙ୍କୁ ଉତ୍ପାଦନ ପାଇଁ କଣ ଯୋଡ଼ିବାକୁ ଦିଏ ଏବଂ ସେହି ପରିବର୍ତ୍ତନଗୁଡ଼ିକ 3D ଡିଜାଇନ୍ରୁ କାହିଁକି ବାହାରେ ରହେ ତାହା ଜାଣନ୍ତୁ।
- Verify a nesting program with toolpaths and the NC simulatorOpen the nesting view on a single sheet to check raw or post-processed toolpaths, simulate the NC code and spot missing tools.
- କାହିଁକି CAM ସେଟିଂସ୍ ବାଧ୍ୟତାମୂଳକ-କ୍ଷେତ୍ର ତ୍ରୁଟି ସହିତ ସେଭ୍ କରିବାକୁ ଅବରୋଧ କରେCAM ସେଟିଂସ୍ ୱିଣ୍ଡୋ ସେଭ୍ କରିବାକୁ ଅନୁମତି ଦେବା ପୂର୍ବରୁ ଆପଣଙ୍କ ଏଣ୍ଟ୍ରିଗୁଡ଼ିକୁ କିପରି ଯାଞ୍ଚ କରେ ତାହା ଜାଣନ୍ତୁ।
- କାହିଁକି .nc ଫାଇଲରେ Z ମୂଲ୍ୟଗୁଡ଼ିକ କନଫିଗର ହୋଇଥିବା Safe Z ସହିତ ମେଳ ଖାଉନାହିଁZ Origin Reference ସେଟିଂ ଏବଂ through-cut clearance କିପରି ଆପଣଙ୍କ .nc ଫାଇଲରେ ଲେଖା ଯାଉଥିବା Z ମୂଲ୍ୟଗୁଡ଼ିକୁ ସ୍ଥାନାନ୍ତରିତ କରେ ତାହା ଦେଖନ୍ତୁ, ଯାହାଦ୍ୱାରା ଆପଣ ଏକ ସଠିକ୍ ଫାଇଲକୁ ପ୍ରକୃତ ଗଭୀରତା ତ୍ରୁଟିରୁ ଅଲଗା କରିପାରିବେ।
ସାମଗ୍ରୀ, ହାର୍ଡୱେର ଏବଂ କନେକ୍ଟର49
- How connectors are assigned per scenarioLearn what a scenario is in connector setup and how it decides which connector is applied to a joint.
- Reduce a single panel's length using panel-level extensionShorten one specific panel by setting a negative extension on it at panel level in a construction style.
- Verify a completed design in QC modeOpen QC mode to see the materials, units and panels used in a completed design before verification.
- Add a connector to several units at onceAdd one connector to many units in a single pass by selecting the scenarios that need it in the Scenario view tab.
- Find and replace a material or edge band in QC ModeTrace which units and panels use a SKU and swap it for another across the design.
- Apply full or half overlay to selected scenarios before adding a connectorApply full or half overlay edits across all current scenarios in the design before adding a connector.
ସବୁ ଦେଖାନ୍ତୁ (49)
- Change edge bands in bulk from the production sectionChange the edge band on a line item in the production section and the change applies to every instance of that line item at once.
- Create a new construction style and add all reductionsCreate a new construction style or reuse an existing one, then add all the required reductions including the bottom reduction.
- Inspect units and panels in the QC Mode tabsRead the Units and Panels tabs to see annotations, rooms and where each material came from.
- Read a design's Raw Material Lists and Cabinet Composite BOQLearn what each Raw Material Lists tab and the Cabinet Composite BOQ show, and how to compare lists by item name rather than Sno.
- Read a panel's machining and edge-band drawing in 2D Panel CAM ModeOpen a panel's 2D Panel CAM Mode to see its hinge cups, drill and contour legends, edge-band labels and view options.
- Use X-ray mode to verify drilling before publishingSwitch the production view to X-ray mode to check drilling details on a single component or the whole cabinet, then click X-ray again to return to the solid view.
- Automate connector counts with rulesTell the software how to handle connectors for a given connection so connectors are added by rule.
- Change drawer bottom and carcass panel material at panel levelChange the core material of a drawer bottom panel or other drawer carcass panels by editing the material at the individual panel level in the production portal.
- Correct wrong materials and push the change to productionFix excess or wrong material types in the design and re-sync the work order so production picks it up.
- Inspect assemblies with exploded view, X-ray mode and panel hidingShow an exploded view with an adjustable explode percentage, toggle X-ray mode to see through parts, and turn off individual panels to inspect internal structure.
- Manage connectors on ticked scenarios from the Actions menuPick a connector and apply it to the ticked scenarios, and use a connector card's three-dot menu for Publish, Filter for this, Replace and Remove.
- Replace a connector in the connector card in manufacturing settingsUpdate the connector in the connector card within manufacturing settings so production output uses the changed hardware connector, then confirm it appears correctly in the design.
- replace-and-selected ନିୟମ ବ୍ୟବହାର କରି କନେକ୍ଟର ବଦଳାନ୍ତୁଏକ କନେକ୍ଟର ପ୍ରକାରକୁ ଅନ୍ୟଟି ସହିତ ବଦଳାନ୍ତୁ ଏବଂ କେତେ କନେକ୍ଟର ବଦଳାଯାଇଛି ତାହା ନିଶ୍ଚିତ କରନ୍ତୁ।
- Replace unwanted hardware in manufacturing settingsConfigure the correct replacement hardware so the unwanted item no longer appears in the output.
- Review board layout settings on the MES portalReview board layout settings on the MES portal.
- Tell how many of each item is requiredUse the material and hardware summary to see how many of each item a design requires.
- ୱାର୍ଡରୋବ ନିର୍ମାଣ ସେଟିଂସରେ ପଛ ସ୍କର୍ଟିଂ ବନ୍ଦ କରନ୍ତୁୱାର୍ଡରୋବ ନିର୍ମାଣ ସେଟିଂସରେ ପଛ ସ୍କର୍ଟିଂ ବନ୍ଦ କରନ୍ତୁ, ଯାହାଫଳରେ ଏହା ଆଉ କଟ୍ ଲିଷ୍ଟରେ ଦେଖାଯିବ ନାହିଁ।
- Understand the sliding wardrobe shutter system propertyLearn what the shutter system property controls in a sliding wardrobe.
- Verify connector placement and run a collision checkCheck that connectors are placed correctly and run a collision check.
- Visualise cabinet assembly with exploded viewsCreate exploded views to see how a cabinet goes together, then refresh admin settings to update columns and generate the CNC zip for machine upload.
- Visualise multi-finish shutters in the designSee how multi-finish on shutters can be visualised in the design.
- Add a finish condition to a panel glue manufacturing ruleAdd a finish condition to a panel glue manufacturing rule by setting the condition type to finish and choosing the tag operator 'equal to'.
- Add hardware to a box and handle closed-box warningsSelect hardware with an unpacked remainder, enter a valid quantity, and reopen a closed box if the warning appears.
- Add stability rails to wardrobes wider than 900 mmAdd stability rails as an option when a wardrobe is wider than 900 mm.
- Change material for specific panels using filter parametersFilter the panels in the finished materials view so a material change applies only to the units that match your criteria.
- Check and bulk-change core material by filteringFilter the materials view by core material to spot a wrong ply and swap it in bulk.
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Check where a panel's hardware came fromRead the connector source in the connector scenario view to tell whether a panel's hardware was inserted by a hardware rule or placed by hand.
- Define connector height ranges with an infinity upper boundDefine multiple bands for a connector's height range, including a final band with an infinity upper bound.
- Define custom LED strip sizes in the admin portalDefine any custom LED strip sizes in the admin portal so they are available for LED grooves in CNC output.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- Machine files do not output two separate groups for split shuttersWhen a shutter is split into two parts using a divisional shutter, the design and 3D view show two separate panels.
- Reproduce rejected panels using rejection recordsUse the rejection record kept for a rejected panel to reproduce it when remanufacturing.
- ଉତ୍ପାଦନ କନେକ୍ଟର ଏବଂ ପରିଦୃଶ୍ୟ ମାଧ୍ୟମରେ ଡିଲିଟ ହୋଇଥିବା ହାର୍ଡୱେର ପୁନଃସ୍ଥାପିତ କରନ୍ତୁଡିଜାଇନକୁ ଉତ୍ପାଦନ ଡିଜାଇନରେ ଖୋଲନ୍ତୁ, 3D ଏବଂ କନେକ୍ଟର ଓ ପରିଦୃଶ୍ୟକୁ ଯାଆନ୍ତୁ, ଏବଂ ଡିଲିଟ ହୋଇଥିବା ହାର୍ଡୱେର ପୁନଃସ୍ଥାପିତ କରିବା ପାଇଁ କାଟାଲଗରୁ ସାଧାରଣ ଗ୍ଲାସ ଭଳି ସାମଗ୍ରୀ ପୁନଃନିର୍ଦ୍ଦିଷ୍ଟ କରନ୍ତୁ।
- Set dummy panel depth to 0 mm to fix Gola cut on blind unitsSet the dummy panel depth to 0 mm so the Gola cut and shelf reveal on a blind unit come out right.
- Track edge banding, core material and finish in panel schedulesCreate and download panel schedules as CSV to track edge banding, core materials and finishes and spot panels with discrepancies.
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand the Modular Units Hardware tabSee what the Hardware tab lists for each cabinet, how rows are grouped, and how to check panel drilling details.
- Understand the two hardware lists for procurement and assemblyLearn how the procurement hardware list and the assembly hardware list differ and which one the assembly team should use.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- Verify a cabinet before sending it to productionCheck a cabinet's SKU structure against the rules before you send it to production.
- Work out strip light drivers and screws manuallyPlace strip lights manually in the drawing so the running length is known, then work out the correct driver rating and screw quantities separately.
- Work with connectors and scenarios in single unit CAM modeOpen a cabinet's CAM menu in the production design to reach Single unit CAM Mode (Panel by Panel), Connectors and Scenarios, then manage each scenario of the selected panel.
ପ୍ୟାନେଲ ଟ୍ରାକିଂ ଏବଂ ଷ୍ଟେସନ37
- Open QC Mode and understand its tabs and work scopeEnter QC Mode, see which work scope it opens on, and learn what each of the four tabs shows.
- Track scanned panel progress in a work orderSee the progress of any scanned panel inside a work order, with green ticks for panels scanned at a station and panel-by-panel status within a project.
- Grant MES roles per user and load mapped stationsTurn on MES roles for individual users without admin rights and reload so mapped station data appears.
- Reject and remake a panel from the manual tableReject a panel and remake it, then regenerate the remake's outputs from the Rejections tab.
- Set up stations and operators for panel trackingStart tracking with one person at a chosen station and add stations and operators as work progresses.
- Understand exempt panels at edgebanding and CNC stationsLearn why some panels are not trackable at edgebanding and CNC stations and where they appear.
ସବୁ ଦେଖାନ୍ତୁ (37)
- Understand Shipment page tabs and station permissionsLearn how the Shipment page's Loading and Unloading tabs depend on the stations mapped to you and what each view requires before you scan boxes.
- Add missing stations and print panel labelsReview the default stations for a new account, add any missing station from station settings, and print panel labels.
- Check per-panel station status on Order ProgressOpen the Order Progress tab to see each panel turn green as it passes each station.
- Create a custom-named station on a standard typeAdd a station by naming it and choosing one of the existing station types.
- Create MES users and stations with the right roles and typesSet up MES admins, MES operators and stations so tracking access can be assigned correctly.
- Deactivate tracking stations a factory does not scan atDeactivate any tracking station your factory does not want to scan at, and station types with no active station are left out of progress calculations.
- Filter tracking data by station status and download the listNarrow production tracking to panels by station status, then download the filtered list.
- ଭୁଲ୍ ଷ୍ଟେସନ୍ ପ୍ରକାର ସହିତ ସୃଷ୍ଟି ହୋଇଥିବା ଏକ ଷ୍ଟେସନ୍ ଠିକ୍ କରନ୍ତୁଷ୍ଟେସନର ପ୍ରକାର ସୃଷ୍ଟି ସମୟରେ ସ୍ଥିର ହୋଇଥାଏ ଏବଂ ସମ୍ପାଦନ କରାଯାଇପାରିବ ନାହିଁ, ତେଣୁ ସଠିକ୍ ପ୍ରକାରର ଏକ ପ୍ରତିସ୍ଥାପନ ସୃଷ୍ଟି କରନ୍ତୁ, ଏହାର ଅପରେଟରମାନଙ୍କୁ ସ୍ଥାନାନ୍ତର କରନ୍ତୁ ଏବଂ ପୁରୁଣା ଷ୍ଟେସନକୁ ବନ୍ଦ କରନ୍ତୁ।
- Get an alert when a panel has already been scannedScan panels on the mobile app and the system alerts you when the same panel has already been scanned.
- Handle rejected panels: retired codes, remakes and undoLearn how a rejected panel's code is retired, how the panel is remade with a fresh code, and when a rejection can still be undone.
- ଆରମ୍ଭ ହୋଇନଥିବା ପ୍ୟାନେଲ୍ ସଂଖ୍ୟା କିପରି ଗଣନା କରାଯାଏଉତ୍ପାଦନ ଟ୍ରାକିଂରେ ଆରମ୍ଭ ହୋଇନଥିବା ସଂଖ୍ୟାରେ କେଉଁ ପ୍ୟାନେଲ୍ ଅନ୍ତର୍ଭୁକ୍ତ ଏବଂ ଏହା କେବେ ବଦଳେ ଜାଣନ୍ତୁ।
- ଉତ୍ପାଦନ ପୋର୍ଟାଲ କିପରି କାରଖାନା ଫ୍ଲୋରରେ QC କୁ ସମର୍ଥନ କରେମୂଳ ଡିଜାଇନ୍ ପରିବର୍ତ୍ତନ ନକରି ଉତ୍ପାଦନ ପୋର୍ଟାଲ କିପରି ଗୁଣବତ୍ତା-ନିୟନ୍ତ୍ରଣ ଯାଞ୍ଚ ଏବଂ ମେସିନ୍-ପ୍ରସ୍ତୁତ ଆଉଟପୁଟ୍ ଦେଖାଏ ତାହା ଦେଖନ୍ତୁ।
- How tracking records and statuses are storedLearn what each scan records, which tracking sources exist, and what item status shows.
- Map users to tracking stations and fix missing usersGive each MES user access to the stations they work at and understand why a user may not appear in the Operators list.
- Pick the station and scan panel labels on the phoneChoose the station on the phone before scanning, and only scan the panel's own label so the code is accepted.
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- Read tracked-panel counts per stationSee why counts differ between Panel Cutting, Edgebanding and CNC, and what a lower count at a later station means.
- Route projects to a factory or vendorConfigure machines per factory or vendor and route a project to the chosen one.
- Scan a panel QR to track it at a stationPoint the scanner at a valid panel label to mark the panel tracked at the currently selected station.
- Scan panels with a Bluetooth scanner or camera modeUse a slow-typing Bluetooth scanner or switch to camera mode, which shows each scan result as a self-clearing sheet on touch devices.
- Scan panels with a camera or hardware scannerUse the camera-based tracker at each station and know that every scan records its source.
- ଆଡମିନ ପୋର୍ଟାଲ ଏବଂ MES ପୋର୍ଟାଲରେ ପ୍ରତି-ବ୍ୟବହାରକାରୀ ପ୍ରବେଶ ସେଟ କରନ୍ତୁଆଡମିନ ପୋର୍ଟାଲ ଏବଂ MES ପୋର୍ଟାଲ ଉଭୟରେ ସେମାନଙ୍କ ଅନୁମତି ସେଟ କରି ପ୍ରତ୍ୟେକ ବ୍ୟବହାରକାରୀଙ୍କୁ ସଠିକ ପ୍ରବେଶ ସ୍ତର ଏବଂ MES ଭୂମିକା ଦିଅନ୍ତୁ।
- Set up an MES operator for tracking station scanningCreate the MES operator as a user in the admin portal with their email ID and map them to a tracking station before scanning can be used.
- Set up factory-floor tracking from workflow to first scanPlan your stations, create operators, assign them to stations and start scanning on Android devices.
- ଟ୍ରାକିଂ ଷ୍ଟେସନକୁ ଡିଲିଟ୍ କରିବା ପରିବର୍ତ୍ତେ ତାହା ବନ୍ଦ କରନ୍ତୁSettings > Configure stations ରେ ଏକ ଟ୍ରାକିଂ ଷ୍ଟେସନ ବନ୍ଦ କରନ୍ତୁ, ଯାହାଫଳରେ ଏହା ଅପରେଟରଙ୍କ ଷ୍ଟେସନ ଚୟନକର୍ତ୍ତାରୁ ହଟିଯିବ କିନ୍ତୁ ଏହାର ଟ୍ରାକ୍ ହୋଇଥିବା ପ୍ୟାନେଲଗୁଡ଼ିକ ସେମାନଙ୍କ ଇତିହାସ ରଖିବେ।
- Track panels manually from the Manual tableOpen the Manual table, pick a published work order and track the panels you need at the station.
- Track panels with a phone camera or the Manual viewUse a phone camera or pick panels in the Manual view when no hardware scanner is at hand.
- Understand station-scan gating and scan orderLearn that gating is all-or-nothing and that scanning out of sequence is not blocked.
- Understand the nine station types and how panels are trackedLearn which station types are scan stages, which are box-based, and how default and extra stations behave as one stage.
- Understand where scan summaries are shownLearn that the platform shows a browser summary of which panel was scanned at which station and at what time.
- QR ସ୍କାନ୍ କାହିଁକି ଅଣଦେଖା ହୁଏ ଏବଂ 'Scan ignored' ଟୋଷ୍ଟ ଦେଖାଏଆପ୍ ସ୍କାନ୍ ଗ୍ରହଣ ନକରି କାହିଁକି 'Scan ignored — <reason>' ଟୋଷ୍ଟ ଦେଖାଏ ଏବଂ Tracking ଓ Shipment ପୃଷ୍ଠାରେ ପ୍ରତ୍ୟେକ କାରଣର ଅର୍ଥ କଣ, ତାହା ଜାଣନ୍ତୁ।
ପ୍ୟାକେଜିଂ ଏବଂ ସିପମେଣ୍ଟ24
- Create a box manually on the Packaging pageCreate a box manually on the Packaging page so the factory floor gets a packaging list to pack panels and box labels can be printed before packing.
- ଏକ ବକ୍ସ ତିଆରି କରନ୍ତୁ, ଏହାର ଲେବଲ ପ୍ରିଣ୍ଟ କରନ୍ତୁ ଏବଂ ପ୍ୟାକିଂ ପାଇଁ ଏହାକୁ ବନ୍ଦ କରନ୍ତୁପ୍ରୋଡକ୍ସନ ଇଣ୍ଟରଫେସରେ ଏକ ବକ୍ସ ତିଆରି କରି, ପ୍ୟାନେଲ ଯୋଡ଼ି, ତାପରେ ଲେବଲ ପ୍ରିଣ୍ଟ କରି ଏବଂ ଏହାକୁ ବନ୍ଦ କରି କଟା ପ୍ୟାନେଲ ପ୍ୟାକ କରନ୍ତୁ।
- How the Shipment/Order Status counts are derivedLearn how boxes, panels and hardware each count towards shipment progress on the Order Status page.
- ପ୍ୟାକେଜିଂ କାଉଣ୍ଟର ପଢ଼ନ୍ତୁ ଏବଂ ବକ୍ସ ଲେବଲ ଓ ତାଲିକା ଡାଉନଲୋଡ କରନ୍ତୁପ୍ୟାକେଜିଂ ପୃଷ୍ଠା ହେଡରରେ ପ୍ୟାକ ହୋଇଥିବା ପ୍ୟାନେଲ ଓ ହାର୍ଡୱେୟାର ଟ୍ରାକ କରନ୍ତୁ, ତାପରେ Box Labels, Packaging List ଏବଂ Unpacked Panels PDF ଭାବରେ ଡାଉନଲୋଡ କରନ୍ତୁ।
- Read the Shipment Loading view and open the Shipment SummarySee the selected shipment's status, loaded and pending boxes, and the actions available, then open its full Shipment Summary.
- Add panels to a box and print its label on the MES Packaging pageTick panels in the Manual panel selector, confirm adding them to a box, and print the box label to close it.
ସବୁ ଦେଖାନ୍ତୁ (24)
- Add panels to a box with the Manual panel selectorFall back to the Manual panel selector to filter panels by core, finishes, edge bands and operations and place them without scanning.
- ସ୍କ୍ରିନର ଡାହାଣ ପାଖରେ ଥିବା ବଟନରୁ ଏକ ପ୍ୟାକେଜିଂ ବକ୍ସ ତିଆରି କରନ୍ତୁPackaging ପୃଷ୍ଠାରେ ଏକ ୱାର୍କ ଅର୍ଡର ପାଇଁ ନୂଆ ବକ୍ସ ତିଆରି କରନ୍ତୁ, ତାପରେ ଏହାର ଲେବଲ ପ୍ରିଣ୍ଟ କରି ପ୍ୟାକେଜିଂ ସମ୍ପୂର୍ଣ୍ଣ କରିବା ପାଇଁ ଏହାକୁ ବନ୍ଦ କରନ୍ତୁ।
- Create a shipment for a work orderOpen the Shipment section for the work order, create the shipment with driver, vehicle, dispatch and receiver details, then scan box labels to mark them loaded.
- ପଠାଇବା ପାଇଁ ବକ୍ସ ସୃଷ୍ଟି କରନ୍ତୁ, ଲେବଲ ସ୍କାନ କରନ୍ତୁ ଏବଂ ଚାଲାଣ ବିବରଣୀ ପ୍ରବେଶ କରନ୍ତୁପ୍ୟାକେଜିଂ ପାଇଁ ନୂଆ ବକ୍ସ ସୃଷ୍ଟି କରନ୍ତୁ, ସମସ୍ତ ପ୍ୟାନେଲ ଟ୍ରାକ ହେଉଛି କି ନାହିଁ ନିଶ୍ଚିତ କରନ୍ତୁ, ତାପରେ ବକ୍ସ ଲେବଲ ସ୍କାନ କରନ୍ତୁ ଏବଂ ପଠାଇବା ପାଇଁ ଆବଶ୍ୟକ ପ୍ରାପ୍ତକର୍ତ୍ତା, ଡ୍ରାଇଭର ଏବଂ ଯାନ ବିବରଣୀ ପ୍ରବେଶ କରନ୍ତୁ।
- Enable the packaging page and map operators to a Packaging stationPublish the work order and map each operator to a tracking station of type Packaging so the page is active.
- Fix packaging scans that are ignoredOpen a box and clear the invalid-QR popup so the packaging scan listener accepts your scans.
- Fix "Panel is already in Box" errors and move panels between boxesLearn why a panel can sit in only one box, what the error means, and how to move a panel to a different box.
- Handle invalid codes and duplicate or closed-box scansRead the reason for an invalid code, pick the panel manually, and confirm before adding to a closed box.
- Load and unload boxes on the Shipment pageScan box QR codes to load and unload boxes, use the tabs and unload list, and revert actions without losing track of records.
- ବକ୍ସ ଲେବଲ ସ୍କାନ କରି ଚଲାଣ ପାଇଁ ବକ୍ସ ଲୋଡ କରନ୍ତୁଆପଣଙ୍କ ମୋବାଇଲ ଫୋନରେ ଲଗ ଇନ କରି ବକ୍ସ ଲେବଲ ସ୍କାନ କରନ୍ତୁ ଏବଂ ଡେଲିଭରୀ ପାଇଁ ଆଇଟମ ଲୋଡ କରନ୍ତୁ, କେଉଁ ବକ୍ସଗୁଡ଼ିକ ଏବେ ମଧ୍ୟ ଲୋଡ କରିବାକୁ ବାକି ଅଛି ଏବଂ ପ୍ରତ୍ୟେକ ବକ୍ସରେ କଣ ଅଛି ତାହା ଯାଞ୍ଚ କରନ୍ତୁ।
- ଏକ ବକ୍ସ ଲେବଲ ପ୍ରିଣ୍ଟ କରି ବକ୍ସ ବନ୍ଦ କରନ୍ତୁ, କିମ୍ବା ପ୍ରିଣ୍ଟ ନହୋଇଥିବା ଲେବଲ ଠିକ କରନ୍ତୁPackaging ରୁ ଏକ ବକ୍ସ ଲେବଲ ପ୍ରିଣ୍ଟ କରନ୍ତୁ କିମ୍ବା ଲେବଲ ବିନା ବକ୍ସ ବନ୍ଦ କରନ୍ତୁ, ଏବଂ ଲେବଲ କାହିଁକି ଅନୁପସ୍ଥିତ କିମ୍ବା ପୁରୁଣା ତାହା ଜାଣନ୍ତୁ।
- Print labels and close boxes for the project stepDownload the labels and packaging listings, then print each box label and close the box until all boxes are done.
- Print or save the Shipment Summary for the driverOpen the Shipment Summary from the Shipment page and print it directly or save it as a PDF to send to the driver.
- ମୋବାଇଲ ଆପରେ ବକ୍ସ ସ୍କାନ କରନ୍ତୁ ଏବଂ ଚାଲାଣ ସାରାଂଶ ଦେଖନ୍ତୁଏକ ବକ୍ସ ଲୋଡ ହୋଇଛି କି ନାହିଁ ଯାଞ୍ଚ କରିବାକୁ ସ୍କାନ କରନ୍ତୁ, ତାପରେ ମୋବାଇଲ ଆପ୍ଲିକେସନରେ ଚାଲାଣ ସାରାଂଶ ଖୋଲନ୍ତୁ।
- Track packaging and shipment in order progressUse order progress to track packaging and shipment so you can trace components missing during shipment.
- ପ୍ରୋଜେକ୍ଟ ପ୍ୟାକିଂ ତାଲିକା ସହିତ ପ୍ୟାକିଂ ସ୍ଥିତି ଟ୍ରାକ୍ କରନ୍ତୁପ୍ରତ୍ୟେକ ପ୍ରୋଜେକ୍ଟ ସହିତ ଏକ ପ୍ୟାକିଂ ତାଲିକା ସୃଷ୍ଟି କରନ୍ତୁ, ଯାହାଫଳରେ ସିଷ୍ଟମ ଦେଖାଇବ କେଉଁ ଆଇଟମଗୁଡ଼ିକ ଏପର୍ଯ୍ୟନ୍ତ ଅନପ୍ୟାକ୍ ଅଛି।
- Track unpacked hardware while packing boxesUse the unpacked items list and remove hardware to return its quantity to the unpacked pool.
- Undo tracking and acknowledge a Panel Not Required alertUndo a tracking in one click from the success message or acknowledge the Panel Not Required alert.