Production
मार्गदर्शक: 480 · विभाग: 10
उत्पादन सेटअप आणि कार्यप्रवाह53
- Lock the design to prevent clashes between design and production editsLock the design when a designer and a production person may edit it at the same time, so the designer cannot make changes until the admin or design head unlocks it.
- समान डिझाइन शेअर करा किंवा प्रोडक्शन डिझाइन प्रत तयार करासंपादने स्वयंचलितपणे सिंक होण्यासाठी समान डिझाइन शेअर करायचे की स्वतंत्र राहणारी प्रोडक्शन डिझाइन प्रत तयार करायची, हे ठरवा.
- Choose copy or share when sending a design to productionDecide whether to create a production design copy or share the same design when sending a design to production.
- Send a design from the design portal to productionCreate the design and drawings in the design portal, then hand it to the production portal for checking before it reaches the shop floor.
- Production Designs मध्ये शेअर केलेली डिझाइन्स कशी दिसतात ते समजून घ्याShare Same Design ने पाठवलेली डिझाइन डिझाइन पोर्टलच्या Production Designs मध्ये कशी दिसते आणि ती तिच्या डिझाइनशी कशी जोडलेली राहते ते जाणून घ्या.
- डिझाइन design portal मधून उत्पादन QC आणि MES पर्यंत कसे जातातdesign portal पासून उत्पादन टीमच्या QC तपासणीतून MES portal मध्ये प्रकल्प कसा जातो ते पाहा, जिथे त्याचे आउटपुट उपलब्ध होतात.
सर्व दाखवा (53)
- Publish a work order so it appears in the MES portalPublish or republish a design so its work order becomes available to the factory team in the MES portal.
- Create a production design in copy modeCreate a production design in copy mode instead of share mode.
- वर्क स्कोप तयार करा आणि प्रोडक्शन डिझाइन पोर्टलमध्ये कट लिस्टमध्ये प्रवेश कराविशिष्ट क्षेत्रासाठी वर्क स्कोप तयार करा जेणेकरून तुम्ही त्याची कट लिस्ट तयार करू शकता आणि कच्च्या मालाच्या बिल ऑफ मटेरियल्सपर्यंत पोहोचू शकता.
- How the production workflow runs from design to work orderFollow how a finalised design moves through production and into the work order, carrying its materials with it.
- How work orders are created and republished from design filesLearn how each design file sent to production becomes its own work order, how updates republish it, and why components stay together.
- Publish a production design as a work orderApply the hardware and connector selections on the production design, then publish it as a work order.
- कॅटलॉग बदलल्यानंतर आउटपुट कॅशे रिफ्रेश करा आणि पुन्हा सिंक कराफिनिश किंवा कोअर मटेरियल सेटिंग्ज बदलल्यानंतर, आउटपुट कॅशे रिफ्रेश करा जेणेकरून अद्ययावत ग्रेन आणि मटेरियल गुणधर्म कट लिस्ट आणि बोर्ड लेआउटपर्यंत पोहोचतील.
- Access production design from the main appReach production design from the main app rather than a separate production-design subdomain or portal.
- खोल्यांना कार्यक्षेत्रांसह एका कार्य ऑर्डरमध्ये बॅच कराअनेक खोल्या एका उत्पादन रनमध्ये एकत्र करण्यासाठी किंवा त्यांना वेगवेगळ्या कार्य ऑर्डरमध्ये विभाजित करण्यासाठी कार्यक्षेत्रे वापरा.
- Edit channels in production design without returning to designCorrect a channel directly in the production design module after a design has been sent to production, without going back to the design module.
- Edit connector and construction changes through production designSend the design to production from Outputs, create a new production and open the production design so you can review and modify connector scenarios there.
- डिझाइनमधून कट लिस्ट आणि उत्पादन आउटपुट तयार कराडिझाइनपासून उत्पादनापर्यंत एकाच प्रवाहात जा आणि स्वतंत्र 2D CAD रेखाचित्रांऐवजी मॉडेलमधून कट लिस्ट, हार्डवेअर लिस्ट आणि इन्स्टॉलेशन मार्गदर्शक तयार करा.
- Publish a checked cut list to a work orderPublish a confirmed cut list so you can download the work order and get the final cutting list and machine outputs.
- Publish a job to the MES portalPublish the job to the MES portal from the production design portal so it reaches production.
- Republish a design so the work order cut list is up to dateMake or verify a change in the production design and republish it so the work order cut list picks up the updated values.
- स्रोत डिझाइनवरून प्रोडक्शन डिझाइन रीसिंक करायुनिट्स जोडण्यासाठी, हटवण्यासाठी आणि सुधारण्यासाठी स्रोत डिझाइनवरून प्रोडक्शन डिझाइन रीसिंक करा आणि पुष्टी करण्यापूर्वी परिणामाचे पुनरावलोकन करा.
- Understand what a workscope is in Production > Work ScopesLearn what a workscope covers and how separate workscopes are set up for the outputs you need.
- Update and resync a design to push it to productionUpdate the design and use the resync feature to push it to production.
- Verify materials with QC and create a work orderCheck that core, finished and edge band materials are correctly applied, then create a work order and download its outputs.
- Add machines after publishing and refresh the machine listAdd a beam-saw or CNC machine in Settings > Machines and make it appear on the published work order without republishing.
- Choose which stages a job usesDecide which station types contribute to progress and leave out Packaging and Shipment for smaller jobs.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Download technical documentation summary from production portal after transferGet a technical documentation summary covering part codes, dimensions, materials, finishes and edge band specifications after transferring a project to production.
- Find CAM mode in Infurnia Production, not DesignLearn where CAM mode is available and why cabinets no longer show it while you work in the Design module.
- Find your way around a production design copy's Production tabOpen a production design copy and use the Production tab toolbar and the Differences between work order and design dialog to compare the work order with the design.
- How work order numbers are assignedLearn that the work order number shown in the project is assigned by Infurnia and cannot be edited by the user.
- Limit a scenario change to the current designScope a construction or CAM scenario change to the current design instead of applying it globally.
- Pack panels into boxes and ship themScan panels into a box on the Packaging page, then complete shipment by scanning the box.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Publish a work order to unlock downloadsPublish the work order so its downloads become available and an immutable published design version is created.
- मशीन आउटपुट तयार करण्यापूर्वी प्रशासकाकडून CAM सेटिंग्ज रिफ्रेश कराप्रशासकाने कॉन्फिगर केलेल्या नवीनतम CAM सेटिंग्ज मिळवा आणि त्या लागू करा, जेणेकरून तुमचे मशीन आउटपुट उल्लंघनांशिवाय डाउनलोड होईल.
- Refresh cutlist settings from Admin and republishPull the latest cutlist settings from the Admin portal and republish the design so updated production files can be downloaded.
- अॅडमिनकडून सेटिंग्ज रिफ्रेश करा आणि आउटपुट डाउनलोड करण्यापूर्वी त्या लागू करानवीनतम अॅडमिन सेटिंग्ज रिफ्रेश करा, त्या लागू करा, नंतर आउटपुट फाइल्स डाउनलोड करून आउटपुटमध्ये मोठ्या समस्या नाहीत याची खात्री करा.
- Resize a unit without breaking MES calculationsChange a unit's dimensions in the design and its production calculations follow the updated size, because it stays the same unit.
- MES रिलीजपूर्वी डिझाइनचा आढावा घ्याउत्पादन व्यवस्थापक डिझाइनचा आढावा घेतो आणि MES ला रिलीज करण्यापूर्वी प्रीमिलिंगसारखी मूल्ये बदलू शकतो.
- Review designs in the production design portal before a work orderBefore a work order is created, use the production design portal to review the design construction-wise.
- Review what changed and when in production design versionsOpen the Versions & History dialog in the production design to see each change with its action, timeline and user, so you can review what was changed on a given day.
- Send a design to production from the homepageOpen the three-dashes menu on the homepage and choose Send to Production to send your design to production.
- Send designs for production via email from the portalSend a design directly by email from the portal so it reaches production.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- प्रोडक्शन डिझाइन लिंक शेअर कराप्रोडक्शन डिझाइनसाठी साधी शेअर लिंक डिझाइन लिंक म्हणून वापरा.
- Archived यादीतून production design अनआर्काइव्ह कराProduction Designs > Archived यादीतून आर्काइव्ह केलेला production design पुन्हा In Progress मध्ये आणा.
- प्रोडक्शन डिझायनरची भूमिका समजून घ्याप्रोडक्शन डिझायनर डिझायनर आणि कारखाना टीम यांना कसा जोडतो आणि उत्पादनापूर्वी डिझाइन कसे तपासतो, ते जाणून घ्या.
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- Use consistent project naming so production can identify the jobTrack each job through production by relying on the project name, designer and status.
- Use Outputs > Production Settings in the design editorOpen Outputs > Production Settings to refresh the cache, check for overlapping modular units and reassign unit, panel and cabinet finish annotations.
- कट लिस्ट तपासा आणि प्रकल्प MES वर पाठवाडिझाइन अंतिम झाल्यानंतर, कट लिस्ट तपासा आणि कारखाना उत्पादनासाठी प्रकल्प MES पोर्टलवर पाठवा.
वर्क ऑर्डर्स आणि प्रकाशन31
- Download board layouts, labels and pasting reportsDownload the board summary and layout files for every board type, and get panel labels, sheet labels and pasting reports as separate downloads.
- उत्पादन आउटपुटमधून पॅनेल वगळाउत्पादनास पाठवण्यापूर्वी उपसंच निवडून किंवा पॅनेल लपवून ते कटलिस्ट आणि शेड्यूलमधून वगळा.
- How saw file formats are chosen for the production machineLearn how the production machine's output type decides the saw file format and what the beam saw operator should check.
- Verify edge bands and cutlist before productionCheck edge bands, back panels and cutlist output in QC Mode before releasing the design.
- Download files from a published work orderOpen the published version of a work order to download raw-material CSVs and machine saw files.
- उल्लंघनांच्या यादीतून टक्कर सोडवाउल्लंघनांची यादी उघडून आणि तेथे solve-collisions क्रिया वापरून टक्कर सोडवा; तेथे मॉडेलवरील टक्कर चिन्हे यादीतील नोंदींशी जुळतात.
सर्व दाखवा (31)
- विभाजनाची रुंदी बदलून किंवा संघर्ष सोडवून ड्रिल संघर्ष सोडवासिंगल युनिट CAM मोडमध्ये ड्रिल आणि ड्रिल संघर्ष पॅनेलचे उल्लंघन तपासा, नंतर मोठ्या समस्यांसाठी solve collisions वापरा.
- एखादा घटक सर्व आउटपुटमधून का वगळला आहे ते तपासाएखादा घटक प्रत्येक आउटपुटमधून का गायब आहे हे शोधण्यासाठी वगळण्याची कारणे एक-एक करून तपासा.
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- Download a machine cutlist and handle unsupported formatsOpen the Cutlist tab, pick a panel-saw machine and fall back to CSV when the machine's format is not supported.
- Find and open board layout violationsSpot board types with violations and open the read-only violations view to see the offending panels.
- पॅनेल, हार्डवेअर आणि शेल्फच्या टकरी दर्शवणाऱ्या उल्लंघनांचे निराकरण कराडिझाइनमध्ये उल्लंघन कशामुळे निर्माण होते आणि ते स्वयंचलितपणे किंवा हाताने कसे दूर करायचे ते जाणून घ्या.
- Generate a board layout and choose Accept, Abort or Re-generateOpen the Board Layout tab to start generation, then decide whether to accept the best layout so far, abort the run, or force a fresh regeneration.
- How output quantity above 1 duplicates panels with _1/_2 labelsSet a cabinet's output quantity above one and see how its panels are laid out and labelled as copies while sharing a single CNC file per panel.
- उल्लंघनांच्या सूचीमधून डिझाइन उल्लंघने वाचाउत्पादन आउटपुट तयार करण्यापूर्वी प्रलंबित उल्लंघने पाहण्यासाठी उल्लंघनांची सूची उघडा.
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- Verify cut list and clear violations before sending to factoryQuality-check the board layout and review the cut list of panel sizes before a design goes to the factory.
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- शून्य किंवा अवैध मापनांचे पॅनेल शोधण्यासाठी प्रकाशन उल्लंघने तपासाउत्पादन फाइल्स डाउनलोड करण्यापूर्वी डिझाइन प्रकाशित करा आणि उल्लंघनांची यादी पाहा, जेणेकरून शून्य किंवा अवैध मापनांचे पॅनेल तुम्हाला सापडतील.
- प्रकाशित वर्क ऑर्डरमध्ये पॅनेल आणि शीट लेबल टेम्पलेट्स निवडास्टिकर्स आणि लेबल सेटिंग्ज उपलब्ध करण्यासाठी वर्क ऑर्डर प्रकाशित करा, नंतर त्याच्या बोर्ड लेआउटसाठी डीफॉल्ट पॅनेल आणि शीट लेबल टेम्पलेट्स निवडा.
- Edit Work Scope > Show Units मध्ये युनिट्स एकत्रितपणे अक्षम कराBulk Disable वापरून युनिट बंद करा आणि त्याच्या कार्डवर ओव्हरराइड केलेली स्थिती दिसून ते Removed Units मध्ये हलताना पहा.
- डिझाइनमध्ये प्रलंबित उल्लंघने असताना कट लिस्ट PDF डाउनलोड कराडिझाइनमध्ये अजूनही प्रलंबित उल्लंघने असली तरीही, ती उल्लंघने कोणत्या स्कोप आणि तपासण्यांना लागू आहेत हे तपासल्यानंतर Cut List PDF डाउनलोड करा.
- प्रलंबित उल्लंघनांसह वर्क ऑर्डर डाउनलोड करावर्क ऑर्डरमध्ये अद्याप प्रलंबित उल्लंघने असल्यास, आउटपुट चुकीचे असू शकतात अशी चेतावणी MES पोर्टल डाउनलोडपूर्वी तुम्हाला देते आणि काय करायचे हे निवडू देते.
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Exempt violations to hide production errors from designersHide production issues and errors from designers by exempting violations in the admin settings.
- री-सिंकमुळे रूम स्कोप बदलल्यानंतर युनिट्स पुन्हा मिळवास्रोत डिझाइनसोबतच्या री-सिंकमुळे युनिट्स काढून टाकल्यासारखे वाटल्यास, कन्फर्मेशनमध्ये दर्शविलेला रूम स्कोप तपासा आणि 'Units removed from manufacturing' मधून युनिट्स पुन्हा मिळवा.
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- PD शाखा रीसिंक करा आणि दोन्ही शाखांचे बदल टिकवून ठेवाPD शाखा रीसिंक करा जेणेकरून ती अद्ययावत होईल आणि दोन्ही शाखांमध्ये केलेले बदल टिकवून ठेवले जातील, हे लक्षात ठेवून की परस्परविरोधी PD-शाखा बदल वगळला जातो.
- Review and accept admin setting differences on a work orderSee which work order settings differ from the admin values and accept them to continue to the Violations check or a CNC machine-files download.
- उत्पादन डिझाइनमधील टक्करी सोडवाकनेक्टर CAM Settings मध्ये सेट केलेल्या प्रमाणात हलवण्यासाठी आणि प्रत्येक बदलाचे पुनरावलोकन करण्यासाठी Violations मधून Solve collisions चालवा.
कट लिस्ट स्तंभ आणि सेटिंग्ज65
- कट लिस्टचे स्तंभ सानुकूलित करा आणि एज बँडची जाडी समाविष्ट करातुम्हाला हवे असलेले कट लिस्ट स्तंभ सेट करा आणि गणनेत एज बँडची जाडी मोजायची की नाही हे ठरवा.
- उत्पादन कट लिस्टमध्ये कापलेल्या आकारासह तयार आकार दाखवापर्यायी कट स्तंभ चालू करा, जेणेकरून कट लिस्टमध्ये एज बँडिंगपूर्वीचा कापायचा आकार तयार पॅनेलच्या आकाराच्या शेजारी दिसेल.
- एज बँडची जाडी तयार शटरच्या आकारावर कसा परिणाम करतेप्रत्येक पॅनलवर एज बँडिंग कसे लावले जाते आणि पॅनलच्या एज बँड सेटिंगमध्ये त्याची जाडी कुठे दिसते ते जाणून घ्या.
- प्री-मिलिंग आणि एज बँडसाठी Cut L आणि Cut W दाखवाCut L आणि Cut W हे स्तंभ जोडा जेणेकरून कटलिस्टमध्ये तयार मापासोबत कटिंग माप दिसेल.
- पॅनेल तपासण्यासाठी कट लिस्टमध्ये कटिंग साइज आणि एज बँडिंग कॉलम सक्षम करापॅनेलचे आकार तुमच्या एज बँड आणि प्रीमिलिंग सेटिंग्जशी जुळतात का हे तपासण्यासाठी कट लिस्टमध्ये कटिंग साइज आणि एज बँडिंग कॉलम चालू करा.
- Get CAM details, cut list and raw material BOQ from a production designProduce CAM details, the cut list and the raw material BOQ together from a production design, scoped and downloaded as you need.
सर्व दाखवा (65)
- How panel sizes include edge band and laminate in the cut listLearn how the Finished Size and Cut Size columns in the production cut list differ, and which size CAM output uses.
- शटर पॅनेल लपवून फक्त कार्कासची कटलिस्ट मिळवाकटलिस्ट तयार करण्यापूर्वी शटर पॅनेल लपवा, जेणेकरून फक्त कार्कास आणि दिसणाऱ्या बाजू आउटपुट होतील.
- Fix panel size discrepancies caused by edge band thicknessMake sure the edge band's actual thickness value is correct, because the software calculates panel size from it rather than from its name.
- Get edge banding quantity from the softwareAdd the exact edge band you use to the setup so the software can give you its quantity.
- Show edge band, panel name and size columnsTurn on the edge band column and read panel name, finished size and cut size in the cutlist.
- पॅनेल्सना सानुकूल लेबल जोडा आणि ती कट लिस्टमध्ये दाखवासानुकूल पॅनेल्ससह पॅनेल्सना सानुकूल लेबल जोडा आणि सानुकूल लेबल स्तंभ सक्षम करून ती कट लिस्टमध्ये आणि स्टिकर्सवर दाखवा.
- ओव्हरलॅप होणाऱ्या आयटमसाठी लेबल प्रॉपर्टीजद्वारे सानुकूल लेबल जोडालेआउटवर लेबल ओव्हरलॅप झाल्यास लेबल प्रॉपर्टीजद्वारे सानुकूल लेबल जोडा आणि ते आवश्यक तिथे ठेवा.
- Choose what prints as the panel name on labelsSet the panel-name element on a label template so the printed label, preview and machine files show the design name, the custom label or a combined name.
- How edgeband lengths in the BOQ are calculatedSee how extensions, edge profiles, pre-milling, cut shapes and wastage adjust each band's BOQ length so you can reconcile the totals.
- How mapped edge band thickness drives cut list dimensionsLearn how the edge band thickness mapped to a material directly affects the cut list dimensions.
- Understand how cut list panels are ordered and groupedLearn how the production cut list lists panels cabinet by cabinet in ascending order and how to see each panel's room.
- Choose the cutlist type and export the cut list CSVSwitch the cutlist type on the Cutlist tab and export a CSV that follows the selected type for beam saw machines.
- प्रोडक्शन सेटिंग्जमध्ये कट लिस्ट स्तंभ आणि मापन अचूकता कॉन्फिगर कराआपल्याला आवश्यक असलेली कट लिस्ट फील्ड्स चालू करा आणि मापन अचूकता सेट करा, जेणेकरून प्रोडक्शन आउटपुट आपल्याला हव्या त्या पद्धतीने मापने राउंड करेल.
- प्रोडक्शन व्ह्यूमधून कट लिस्ट डाउनलोड कराप्रोडक्शन व्ह्यूमधून पॅनेल लिस्ट Excel किंवा PDF फाइल म्हणून डाउनलोड करा आणि तिचे स्तंभ वाचा.
- Read panel dimensions in the cut size columnFind each panel's dimensions in the cut size column of the cut list.
- Understand cut edgeband on panels with cut or slanted edgesLearn when a panel carries a cut edgeband and why rectangular panels correctly show 'No Edgeband'.
- Generate and download a cut list with cut length and edge bandsGenerate a cut list from the production module and download it, enabling parameters such as cut length and edge bands before generating.
- How cutting size is calculatedLearn how cutting size subtracts edge banding and pre-milling from the panel dimension.
- How shelf depth is calculated in cut listsLearn how an adjustable shelf's depth is derived from the carcass depth, the shelf reveal and the back panel offset.
- Set board sizes, offcuts and saw width in Board Layout SettingsGive each board type its sheet sizes and stock offcuts, set the cutting type and saw width, and override the size for a single board when needed.
- Set pre-milling type and read edgeband columns in the MES cutlistChoose how pre-milling is applied and read each edge's band and cut length in the MES cutlist.
- Understand shutter sizing in a child partitionLearn why a shutter added to a child partition takes its size from that partition rather than the overall unit height.
- Understand skirting notches on wardrobe carcass side panelsLearn which units get skirting cuts on carcass side panels, how each wardrobe type maps its cuts, and what to check when a notch is missing.
- Add Combined Label and room name columnsTurn on the Combined Label and room name columns and move room name to the top of the cutlist.
- Change the cabinet code shown in cutlist outputsEdit the cabinet code field's display name in the Homag or Biesse tab of Cutlist Preferences so your cutlist outputs show the column name you want.
- Check which downloads need a published work orderSee which footer downloads stay disabled on an unpublished work order and which ones remain available.
- How cut dimensions relate to finish dimensionsLearn when a panel's cut length and width match its finish dimensions and when edgebanding makes them differ.
- How cutlist and board layout accuracy settings control decimal placesLearn how the accuracy control in cutlist settings and board layout settings decides how many decimal places sizes are shown with.
- How cut list panel names use unit and panel codesLearn how each cut list panel is identified by a unit code plus a panel number and how that identifier links back to the 3D model.
- How the Room Name field in cutlist labels is filledLearn where the Room Name field in the cutlist/label export gets its value and what it shows when a project has no room defined.
- Identify rooms in the cut list without renaming cabinetsShow the room name as a separate column in the cut list so you can tell which room each cabinet belongs to without changing the cabinet name.
- वर्क स्कोपसह कट लिस्ट एका खोलीपुरती मर्यादित कराएका खोलीसाठी वर्क स्कोप तयार करा, जेणेकरून कट लिस्ट फक्त त्या खोलीतील कॅबिनेट्स दर्शवेल.
- Open Cutlist Settings and apply column changesOpen Cutlist Settings from the cutlist header and apply visibility, naming and order changes per cutlist type.
- Review cut list by cabinet then panel detailsOpen a cabinet's cut list, check each panel's details and mark panels verified, and view the unit visually to confirm rails, shelves and back panel position.
- Set pre-milling type by edge-band thickness or for all panelsChoose whether pre-milling follows each panel's edge-band thickness or applies the same setting to all panels, then save and recalculate to verify the cutting length.
- Set the grain convention and show grain in panel infoChoose how grain is labelled and see the Grain row in the board layout's panel info.
- Understand fixed shelf depth and partition dimensionsLearn that the partition refers to the space within the carcass, not the outer panel, when reading fixed shelf depths.
- Add extra custom columns to a cutlist exportLearn how many extra custom columns you can add beyond the standard fields when exporting a cutlist for a third-party saw or ERP system.
- Change a panel's core in QC mode > Panels > Modify PanelsSet a panel's Core Material Source and, when you need a different core for that panel alone, switch the Source to Custom and change it.
- Change the cabinet code label in cutlist preferencesChoose the Cabinet Code field for cutlist output and set its display name on the Homag, Biesse or Basic tab.
- Choose between a full top panel and half railsLearn how a full top panel uses more material and gives different panel sizes than half rails.
- Control cut list columns and their exported orderFilter rows with the search box and set column visibility, names and order so the export matches the screen.
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- Enable material code column to group cutlist by core materialUse the material code column, which carries core material information, to group the cutlist by core material.
- How back panel material assignment affects finish sheet countLearn why a finish can show more sheets than expected when a back panel uses a different material from the carcass.
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- How construction edges change carcass panel sizes in the cutlistLearn how the inset or outset choice at each shared carcass edge changes panel sizes in the cutlist.
- Read part codes and part names in the cut listLearn how the part code and part name in the cut list tell you which cabinet and which panel a row belongs to.
- Remove cut length and cut width columns when pre-milling is usedHide the cut length and cut width columns from the cut list display when pre-milling makes them unnecessary.
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- Set dimension accuracy and header options per cutlist typeSet dimension accuracy to 1 mm and switch on project and store header rows for the cutlist type you are working with.
- Set elevation preferences in the admin portalControl which panels appear as additional manufacturing details in elevations by setting the elevation preferences in the admin portal.
- CSV आउटपुट आणि निवडलेल्या स्तंभांसह पॅनेल सॉ मशीन सेट करातुम्हाला आवश्यक असलेल्या स्तंभांसह CSV कट लिस्ट आउटपुट करण्यासाठी कटिंग पॅनेल सॉ मशीन कॉन्फिगर करा, सुरुवात part code ने करा.
- Show client name and work order code columns in the cutlistSwitch on the client name and work order code columns in the cutlist field settings so they appear alongside the room name.
- Show material code alone by turning off finish columnsCombine the core material code with the external and internal finish codes into one material code and hide the separate finish columns for a more compact cutlist.
- Basic cut list समजून घ्या आणि युनिटचे पॅनल्स शोधाBasic cut list काय दाखवते, Operations आणि Quantity हे स्तंभ कधी दिसतात आणि त्यात युनिटचे पॅनल्स कसे शोधायचे ते जाणून घ्या.
- Understand why PVC skirting is not on the cut listLearn that PVC skirting is bought readymade, so it is never cut from wood and never appears in the cut list.
- Use pre-milling to compensate for edge-band thicknessApply a per-side pre-milling allowance instead of cutting panels oversize, and decide whether your factory needs pre-milling at all.
- कट लिस्टमध्ये प्री-मिलिंग स्तंभ कधी आवश्यक असतोकट लिस्टमधील प्री-मिलिंग स्तंभ कधी आवश्यक असतो आणि कधी तो केवळ अशा पॅनेलसाठी उपयुक्त असतो ज्यांचे प्री-मिलिंग सेटिंग प्रत्येक कडेसाठी वेगळे असते, हे जाणून घ्या.
कट लिस्ट आउटपुट आणि मशीन स्वरूपे52
- NC आणि बीम सॉ मशीनसाठी Infurnia CSV कट लिस्ट कशा प्रकारे कार्य करतातNC किंवा बीम सॉ मशीनसाठीच्या Infurnia CSV फाइलमध्ये काय असते आणि काय मशीनवर सोडले जाते, ते जाणून घ्या.
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- वर्क ऑर्डरमधून कट लिस्ट आणि कच्च्या मालाचे आउटपुट डाउनलोड करावर्क ऑर्डर प्रकाशित करा, त्यानंतर प्रोडक्शन पोर्टलवरून कट लिस्ट, कच्च्या मालाची यादी आणि बोर्ड लेआउट डाउनलोड करा.
- Match each machine Output selection to its file formatSee which file extension each machine Output selection produces, from .mpr and .cix to .nc, .xml and .dxf.
- कट लिस्ट आणि बोर्ड लेआउट डाउनलोड करा, नंतर कोर मटेरियलनुसार क्रमवारी लावाप्रकाशित आवृत्तीतून तुमची कट लिस्ट आणि बोर्ड लेआउट दस्तऐवज डाउनलोड करा, नंतर विशिष्ट बोर्ड प्रकारांसाठी कट लिस्ट मिळवण्यासाठी CSV ची कोर मटेरियलनुसार क्रमवारी लावा.
- कटिंग लेआउट, कटलिस्ट आणि CNC फाइल्स आउटपुट करातुमच्या सॉ आणि मशीनसाठी बोर्ड लेआउट, कटलिस्ट आणि CNC फाइल्स मिळवा.
सर्व दाखवा (52)
- मटेरियल, हार्डवेअर आणि BOQ याद्या आउटपुट कराखरेदी आणि तपासणीसाठी मटेरियल, हार्डवेअर, बोर्ड प्रकार आणि BOQ याद्या तयार करा.
- Add a machine in MES machine settingsAdd a machine by choosing its type, category and output format, then enter its name and settings.
- कट लिस्ट स्तंभ निवडा आणि पॅनेल शेड्यूल CSV निर्यात करा62 कट लिस्ट स्तंभांपैकी कोणते दाखवायचे ते निवडा, नंतर त्याची माहिती पंक्ती आणि एज बँड लांबींसह पॅनेल शेड्यूल CSV मध्ये निर्यात करा.
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- How drill information and the cut list come from hardwareLearn how the hardware you define in the design produces drill information and the cut list.
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Download a raw material summary for a completed projectDownload a raw material summary of core, finish and edge band material once the project is complete.
- Explore the Board Layout footer, optimization settings and outputs in MESLearn what the all-board-types footer, Optimization Settings, Exploded View output and Cutlist type dropdown offer in an MES work order.
- Get a screw-level hardware list from production outputSee how production output gives you a basic hardware list, and how configuring hardware setup lets it detail individual items such as which screw is used and how many are required.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- पॅनेल ड्रॉइंग PDF वर ड्रिलची स्थिती, लेजेंड आणि रेषा शैली वाचामॅन्युअल पॅनेल ड्रॉइंग PDF प्रत्येक ड्रिलची स्थिती, आकार आणि प्रकार कसा दर्शवते ते जाणून घ्या, जेणेकरून तुम्ही ते शॉप फ्लोअरवर वाचू शकाल.
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- मशीन आउटपुट निवडण्यापूर्वी स्वीकारले जाणारे फाइल स्वरूप तपासाआउटपुट स्वरूप निवडण्यापूर्वी तुमची मशीन कोणती फाइल स्वरूप स्वीकारते ते तपासा, नंतर प्लॅटफॉर्म देते ते सुसंगत आउटपुट वापरून पहा.
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure cutlist export options and pre-millingSet dimension accuracy, quotes, header rows and pre-milling values so exported cutlist values come out correct.
- Confirm the format a machine accepts before exportingCheck the machine's supported format before exporting cut list and production data, and plan a CSV workflow when DXF carries geometry only.
- Download a machine-specific cutlist from Custom CutlistPick a panel-saw machine from the Custom Cutlist menu to download the cutlist formatted for that machine.
- Download a PDF of the production layoutDownload a PDF of the production layout from the toolbar in the production layout view.
- Download CNC file as a zip and upload it to the machineDownload the CNC file, extract the zip and upload the extracted file to the CNC machine.
- Download countertop information as an Excel fileDownload the countertop information as an Excel file so you can review it or use it further.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Download machine files for a CNC machineDownload the machine files for a CNC machine from its Machine Files download option, and use the menu beside it for DXF output.
- Download optimization XML and label outputsRun optimization to generate an XML file and label outputs, then confirm and download them from the optimization results for downstream machine and production consumption.
- Download project outputs as PDF or XLSGenerate project outputs and download them in either PDF or XLS format, with a single module's output showing panels, hardware, sizes, material and finish.
- Download raw material and hardware requirement sheets separatelyDownload separate requirement sheets for wooden raw materials and hardware raw materials from the production tab.
- Download raw material list as PDF or CSVGet the plan and quantity for each item, then download the raw material list from the MES work order as a PDF or CSV files to hand to the factory team.
- Download saw files, board layouts and panel labelsGet the saw XML, board layout PDFs and panel labels from the published work order.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download saw files, nesting files and panel labelsUse the footer menus to download machine-formatted files and numbered labels for the current scope.
- Download the board layout PDF and cut panels on a tabletDownload the board layout PDF from a published work order to hand to the factory as the cutting instruction, then cut and label each panel on a tablet.
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- मशीन सेटअप कॉन्फिगरेशन कसे कार्य करतेमशीन सेटअप एकदा कॉन्फिगर केल्यानंतर सर्व भविष्यातील कामांसाठी पुन्हा वापरला जातो, हे जाणून घ्या.
- How the Profile Cutting List and Profile 1D Layout are generatedLearn how the Profile Cutting List is generated from the sizes entered for glass shutters with profiles all around, and how the Profile 1D Layout shows each profile piece cut from the stock length and what remains.
- तुमच्या सॉ मशीनशी जुळणारा कटलिस्ट एक्सपोर्ट फॉरमॅट निवडातुमच्या सॉ ब्रँडसोबत काम करत असल्याचे ज्ञात असलेला कटलिस्ट फाइल फॉरमॅट निवडा, जेणेकरून आयात केलेल्या पॅनल्सची योग्य मापे टिकून राहतील.
- Open the raw materials output and download lists as CSV or PDFOpen the raw materials output from the outputs tab and download the material and hardware lists you need.
- Pull latest Tool and CNC settings from AdminRefresh Tool and CNC settings from the Admin portal into the current work order via Settings.
- विसंगतीचे निदान करण्यापूर्वी कार्यादेशातून SAW फाइल नव्याने पुन्हा डाउनलोड कराकार्यादेशातून SAW फाइल नव्याने डाउनलोड करा, जेणेकरून मशीन जुन्या निर्यातीऐवजी सध्याची रचना-मापे वाचेल.
- प्रत्येक खोलीसाठी कच्च्या मालाचे प्रमाण पहाप्रत्येक खोलीसाठी स्वतंत्र कार्यक्षेत्र तयार करा आणि Raw Materials विभागात त्यांच्यामध्ये बदल करा.
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- Understand hardware quantities rounded up to whole setsLearn why per-set hardware quantities in the Raw Material list are rounded up and how to check a quantity that looks too high.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.
- Use KD XML format for cutting filesChoose KD XML as the output format when you generate cutting files for cutting operations.
- प्रत्येक उत्पादन टीमला कोणती आउटपुट फाइल द्यावीप्रत्येक उत्पादन टीमला त्याला आवश्यक असलेली आउटपुट फाइल द्या: कटिंगसाठी XML saw फाइल, खरेदीसाठी panel material आणि hardware PDFs, आणि असेंब्लीसाठी composite cabinet BQ.
बोर्ड लेआउट आणि नेस्टिंग69
- बोर्ड लेआउट आणि कच्च्या मालाचा अहवाल शेअर कराकिचन डिझाइनसाठी बोर्ड लेआउट आणि कच्च्या मालाचा अहवाल शेअर करा, जेणेकरून तुम्ही प्रत्येक बोर्डावरील शटर आणि पॅनेल मोजू शकता आणि कोणतेही वगळले गेले नाहीत याची खात्री करू शकता.
- पॅनेल कटिंगसाठी प्लॅटफॉर्म उत्पादन बोर्ड लेआउट कसा तयार करतोपॅनेल कटिंगसाठी तुमची शॉप-फ्लोअर टीम अनुसरू शकते असा उत्पादन बोर्ड लेआउट प्लॅटफॉर्म कसा तयार करतो ते पहा.
- Enable stacking per work order and set maximum stack heightTurn on stacking for a work order and set how high boards may stack in its board layouts.
- How the Half / Fractional Sheet Split Gap worksLearn what the Half / Fractional Sheet Split Gap measures, its default value, and which utilization modes enable it.
- How board layout counts boards by material and panel typeLearn how board layout counts boards from the materials and panels defined in the catalogue and lists the requirement for each panel type.
- How grain direction affects board layout optimizationDefine grain direction for each finish so panels are placed according to their grain when the board layout is optimized.
सर्व दाखवा (69)
- How grain direction affects sheet count in nestingLearn why a grain or directional finish forces panels to nest in a fixed orientation and how that can raise the number of sheets you need.
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Read the legends and review panel details before productionUse the legends and PDFs to check grain direction, grooving, edge bands and material details before cutting.
- Rotate a panel to fit while respecting grain directionFit a panel that does not match the board layout by rotating it, and override its grain direction when vertical grain would block the rotation.
- Set dimension accuracy and compare fractional-sheet wasteChoose the dimension accuracy for the layout output and use the waste percentage to compare layouts.
- Change board size or blade settings to recalculate board requirementChange the board size or blade settings and the board requirement is recalculated.
- Configure small-part rules and the split marginDecide when a part counts as small, how far it stays from sheet edges, and how wide the split margin is.
- Control sheet ordering, fractional sheets and where settings are editedSet sheet ordering, the minimum free length for fractional sheets, and adjust these options from inside a project.
- Download and share the board layout and board summary PDFsTake the board layout and board summary PDFs from the footer and forward the layout to the factory or a manufacturer.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- Edit a work order board layout after generationChange a work order's board layout by hand after it has been generated instead of keeping it locked to the production design it came from.
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- Fix an oversized panel by splitting itSplit an oversized panel in the design portal so it fits the board and is included in the layout.
- Fix grain-direction rotation refusalsCorrect a wrong-running grain at the panel's grain declaration instead of rotating it on the sheet.
- How board layout groups panels into board typesLearn how a design's board layout groups panels into board types and proposes a least-waste layout.
- How fractional sheet settings split a sheetLearn how fractional sheet settings divide a sheet by a set fraction, such as a 250 mm fraction or a 50/50 split of the length.
- How grain flags on finishes control panel rotation in board layoutLearn how a panel's grain requirement comes from the grain flag on its finish and why a grained panel is not allowed to rotate in board layout.
- How stacking height limits stack count in board layoutLearn how the maximum stacking height setting in board layout / MES output determines how many boards fit in one stack.
- How the board-layout margin worksLearn what the board-layout margin defaults to, when it is applied and where you can change it.
- Inspect, move and discard panels in a design's Board LayoutClick a panel to see its Panel info, drag it to move it on the sheet, and use Discard Changes to put the layout back.
- Mark all panels of a cut sheet as tracked in bulk from board layoutMark every panel on a cut sheet as tracked in one action when the operator has not scanned each panel individually.
- Optimize board layouts for units automaticallyLet the software calculate board layouts and wastage for units such as vanities and wardrobes, with the option to adjust manually.
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- Read panel codes and labels on a board layoutEach panel on a board layout carries a panel code and a label, so the operator can paste the correct label on the correct panel after cutting.
- Regenerate board layout after turning off panelsTurn off all panels except the top and shutter panels, then regenerate the board layout so the shutter panels get their own separate layout.
- Set the cutting type and optimisation criteria for board layoutsChoose straight cuts or nesting, then tune recuts, optimisation criteria and stacking for the layout.
- Troubleshoot a stopped cutting job and read sticker codesCheck margins and saw width when a cutting job stops, and see how the sticker material code is built.
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- कटिंग गणनेमध्ये बोर्डची परिमाणे आणि ब्लेडची जाडी समजून घ्याबोर्डची परिमाणे डीफॉल्टनुसार दोन्ही बाजूंनी 10 mm ट्रिमिंग कशी विचारात घेतात आणि कटिंग गणनेसाठी ब्लेडची जाडी स्वतंत्रपणे कशी भरली जाते ते जाणून घ्या.
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- कट लिस्ट ऑप्टिमायझेशनचे ध्येय निवडाकमीत कमी सामग्री, कमीत कमी प्रक्रिया वेळ किंवा संतुलित हे निवडा, नंतर ऑप्टिमाइझ केलेला लेआउट तयार करण्यासाठी ते लागू करा.
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- Choose the optimisation criterion per sheet typePick a criterion for each sheet type, or apply one to all with the Overall row, then continue without recomputing.
- Choose the room and download scope for board layout filesOpen the board layout for one room and set the screen level that decides which panels a download covers.
- Clear an oversized panel violationClear an oversized panel violation either by splitting the panel to the available height or by entering the correct board dimensions in the board layout settings.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Enable minimum distance from edge for laminate border allowanceTurn on the minimum distance from edge setting so laminate border allowance is applied around the panel and set the maximum length of the smaller side in the same settings.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix grain-alignment violation by rotating finish 90 degrees at panel levelRotate the finish 90 degrees at panel level so the panel aligns itself to the vertical grain and the violation clears.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- ब्लेडची जाडी ट्रिम मार्जिनपासून वेगळी कशी मोजली जातेकटांमधील अंतर म्हणून ब्लेड (केर्फ) जाडी वेगळ्या भत्त्यास्वरूप कशी लागू केली जाते आणि उर्वरित माप कसे हाताळले जाते ते जाणून घ्या.
- Inspect a composite sheet and keep the board remainderOpen a composite sheet to see its core material and combined pieces, and keep the unused board remainder for other projects.
- Read the Optimization Statistics modal after a comparison runRun the layout with Decide after Comparison and read each sheet type's sheet count, processing time and offcut figures.
- लेआउट त्रुटी असलेल्या शीट्ससाठी रीकट मर्यादा 1 किंवा 2 पर्यंत कमी कराज्या शीट्समध्ये पॅनल्स एकमेकांवर ओव्हरलॅप होतात किंवा बोर्डच्या बाहेर जातात, अशा शीट्ससाठीच रीकट मर्यादा कमी करून त्या दुरुस्त करा.
- उरलेले तुकडे पॅनेल म्हणून जोडून पुन्हा वापराउरलेला तुकडा बोर्ड पॅनेल किंवा कोड म्हणून जोडा, जेणेकरून तो पुढील प्रकल्पात वापरता येईल.
- Set board sizes, quantities and force useGive each board size its available sheet count and mark the sizes the optimizer must consume.
- कट-लिस्ट परिमाणे पूर्णांकित करण्यासाठी परिमाण अचूकता 1 mm वर सेट करापरिमाण अचूकता 1 mm वर सेट करा, जेणेकरून सिस्टम गणना केलेली परिमाणे पूर्ण मिलिमीटरमध्ये पूर्णांकित करेल आणि ती इच्छित पॅनेल आकाराशी जुळतील.
- Set margins, blade thickness and saw widthSet the board margins and saw blade allowance so cutting jobs run with the right values.
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
- Edit Layout मध्ये निवडलेला पॅनेल ठेवताना शीट्स बदलाबोर्ड प्रकाराच्या शीट्समध्ये फिरण्यासाठी आणि तुम्ही निवडलेला पॅनेल तुम्ही निवडलेल्या शीटवर ठेवण्यासाठी ब्रेडक्रंबचा शीट मेनू उघडा.
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand optimization after a material changeLearn what happens to optimization when core or finish materials are changed in a design.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Understand why cut-list labels and board layouts show different sizesLearn why a cut-list label shows a size with decimals while the board layout shows rounded whole numbers.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- View a board's layout with labelsClick an individual board to see its layout with labels.
पॅनेल लेबल्स आणि स्टिकर्स35
- How panel labels and QR codes work in productionLearn what panel labels carry and how their QR codes drive CNC file lookup and order tracking.
- आउटपुट लेबल, पेस्टिंग अहवाल आणि असेंब्ली दृश्येशॉप फ्लोअरसाठी प्रिंट शीट आणि पॅनेल लेबल, पेस्टिंग अहवाल आणि एक्सप्लोडेड असेंब्ली दृश्ये.
- Select the correct machine type when downloading panel labelsChoose the machine type that matches your CNC machine when downloading panel labels so the QR code starts the correct operations.
- Track work order progress by scanning panel label QR codesScan the QR code on a panel label to track a work order's progress through factory stations and mark completion at each scanned stage.
- Add separate QR codes for top and bottom programs on HOMAG CNC labelsGive a HOMAG CNC panel label separate QR codes for the top machining program and the bottom machining program.
- पॅनेल लेबलांवरील बारकोड ऐच्छिक आहेत आणि ट्रॅकिंगसाठी वापरले जातातपॅनेल लेबलांवरील बारकोड अनिवार्य नाहीत आणि ते ट्रॅकिंगसाठी वापरले जातात, म्हणून ट्रॅकिंगची आवश्यकता नसल्यास तुम्ही बारकोड क्षेत्र काढून टाकू शकता आणि लेबलचा आकार कमी करू शकता.
सर्व दाखवा (35)
- How panel label defaults are setLearn the default panel label size and border the platform uses.
- Make panel labels visible in the design portalPublish the design so its panel labels for the cut list become visible, without opening the cut list.
- Read panel codes to identify carcass and unitPanel identifiers in production output make it easy to see which carcass a panel belongs to and which unit has to be cut, so a specific unit can be picked out quickly during cutting.
- मशीनसाठी पॅनेल लेबल रोटेशन चालू कराप्रत्येक मशीनसाठीची सेटिंग सुरू करा, जेणेकरून त्या मशीनच्या आउटपुटमध्ये पॅनेल लेबल फिरवलेली असतील.
- Add edge band code, final size and material info to production labelsExtend production labels to show the edge band code, final panel size and internal and external material information.
- Choose which box label template a work order printsSet the default box label template for one work order so its labels print in the layout that client or project needs.
- Create a custom label template based on printer and sticker sizeCreate a custom label template, set your sticker size, choose the information fields to print, then update it and set it as default.
- Create, rename, update and default panel and box label templatesManage the org's panel and box label templates, from creating and customising them to setting the org-wide default.
- उत्पादन आउटपुट म्हणून पॅनेल लेबल्स डाउनलोड करापॅनेल लेबल्स डाउनलोड करण्यायोग्य उत्पादन आउटपुटपैकी एक म्हणून तयार केली जातात.
- Enable loading order and premilling-by-side in sticker templateTurn on loading order and premilling by side in the sticker template so the sticker shows which side faces up and the premilling value per edge.
- Filter and report progress per operationCombine station and tracking-status filters and enable show detailed progress to see per-operation completion.
- बॉक्स लेबलवर गहाळ असलेला संस्थेचा लोगो दुरुस्त करालेबल पुन्हा तयार करून किंवा लोगो कॉन्फिगरेशन आणि टेम्पलेट लेयर तपासून बॉक्स-लेबल पूर्वावलोकनांवर आणि छापलेल्या PDF मध्ये संस्थेचा लोगो दिसू द्या.
- ऑर्ग लोगो आणि डुप्लिकेट QR एकमेकांवर येणाऱ्या पॅनेल लेबलची दुरुस्ती कराऑर्ग लोगो आणि डुप्लिकेट पॅनेल QR दोन्ही एकाच पॅनेल लेबलवर का छापता येत नाहीत, तसेच लेबल लेआउट आणि एक्सपोर्टमधून काय अपेक्षित आहे, हे जाणून घ्या.
- बॉक्स हटवल्यानंतर उडी मारणाऱ्या बॉक्स क्रमांकांची दुरुस्ती कराबॉक्सचे पॅनेल्स अन-पॅक केलेल्या पूलमध्ये परत करण्यासाठी बॉक्स हटवा, नंतर उर्वरित बॉक्स क्रमाने पुनर्नामित होतील अशा प्रकारे ॲनोटेशन्स पुन्हा नेमून द्या.
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Fix user component annotation labels that cannot be changedUser component annotations are auto-labelled, so their labels cannot be edited.
- पॅनेल लेबल स्वयंचलितपणे तयार करा आणि प्रिंट करालेबल लेआउट सेट करा, समाविष्ट करायची पॅनेल माहिती निवडा, नंतर बोर्ड लेआउट वैशिष्ट्यांमधून लेबल डाउनलोड करा आणि प्रिंट करा.
- How panel stickers carry a CNC barcode alongside the scan QR codeLearn how the panel sticker can carry a barcode for the CNC machine in addition to the QR code used for scan tracking, and how a setting switches the machine-file field between a barcode and a QR code.
- शीट लेबल कसे काम करतातएकूण शीट क्रमात प्रत्येक शीटला स्वतःचे लेबल कसे मिळते ते जाणून घ्या.
- डिझाइन पोर्टलमध्ये प्रकाशित केल्यानंतर पॅनेल लेबल दृश्यमान करापॅनेल लेबल दृश्यमान होण्यासाठी तुमचे डिझाइन डिझाइन पोर्टलमध्ये प्रकाशित करा.
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Read edge band thickness on the panel labelThe panel label prints the edge band thickness as a number on the side of the diagram where that banding applies, so shop-floor staff see it at a glance.
- Read the external and internal finish on a panel labelOpen the panel label to see which side of a panel carries the external finish and which carries the internal finish.
- Save label printing format files to drive for automatic retrievalLabel creation requires cut sizes, finish sizes, operations, edge banding thickness, and panel indicators.
- Scan panel labels to detect the correct CNC filePanel labels include a barcode that a CNC machine scans to detect the correct file for that panel.
- Show edgeband face grooving on panel labelsShow grooving information on panel labels in addition to the board layout view.
- बॉक्स लेबलवर संस्थेचा लोगो दाखवा आणि त्याची जागा निवडाबॉक्स लेबल टेम्पलेटवर संस्थेचा लोगो सुरू करा आणि तो कुठे बसतो ते निवडा, कोणता लोगो वापरला जातो आणि पानांवर तो कसा वागतो हे लक्षात ठेवून.
- Understand offcut management in productionLearn that offcut management is not currently available in production and that labels are generated only for panels accounted for in a project.
- Update the sticker template after changing sticker settingsLearn how the sticker template controls which information appears on the sticker and can be switched on or off per field.
CNC आणि CAM ऑपरेशन्स65
- पॅनेलवर कटआउट्स जोडा आणि CNC साठी ऑपरेशन प्रकार व टूल नियुक्त करापॅनेलच्या बाह्य पृष्ठभागावर एक निश तयार करा, तिची कट खोली व ऑपरेशन प्रकार सेट करा आणि ती CNC आउटपुटसाठी उपलब्ध करा.
- Understand when back-panel grooves appear in CAM outputLearn how inset back panels generate groove operations on surrounding panels and which preferences and machine settings decide whether and how those grooves reach CAM/MES output.
- CAM मध्ये include चिन्हांकित करून, प्रकार, खोली आणि टूल निर्दिष्ट करून CAM ऑपरेशन जोडाडिझाइन वैशिष्ट्य CAM मध्ये include म्हणून चिन्हांकित करा, नंतर त्याचा कट प्रकार, खोली आणि पसंतीचे टूल सेट करा आणि ते मशीनकडे पाठवा.
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- Cut a curved or arched panel from a final-size panelStart with a panel already at its final dimensions and cut the curve out of it to produce a curved or arched panel.
- CIX आउटपुटसाठी Biesse Works सुसंगतता सक्षम करामशीन सेटिंग्जमध्ये Biesse Works सुसंगतता चालू करा, जेणेकरून तुमचे Biesse CNC मशीन तयार केलेले CIX आउटपुट योग्यरित्या वाचू शकेल.
सर्व दाखवा (65)
- CAM ऑपरेशन्समध्ये ट्रिमिंग वि. पॉकेटिंगट्रिमिंग संपूर्ण क्षेत्रभर सामग्री कशी काढते आणि पॉकेटिंग परिमितीच्या आत निश्चित जागा कशी कोरते, हे जाणून घ्या.
- आउटपुट डाउनलोड करण्यापूर्वी CNC मशीन प्रकार आणि टूल डेटा कॉन्फिगर कराड्रिलिंग फेसनुसार मशीन प्रकार सेट करा, राउटिंग आणि सॉ टूल्स जोडा, नंतर सेटिंग्ज सेव्ह करा आणि CNC आउटपुट डाउनलोड करा.
- Force a tool and finish adding a CNC machineMap drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- Set routing line tool position L, R or C for cut alignmentClick a routing line to see the tool position with L, R and C options, specify a preferred tool, and check the panel preview by selecting the machine instead of raw view.
- Create custom cuts in edit panel design and include them in CAMDraw and offset a custom shape on a panel, define it as a cut with a depth, and enable the include in CAM option so the machining reaches the CNC files.
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Enable Include in CAM to push panel operations to productionTurn on Include in CAM when adding a panel operation so it reaches production, then choose the operation type, tool and tool number.
- Enter saw tool name, thickness and axis for back-panel groovingAdd a saw tool row in the CNC machine settings so back-panel grooving operations carry the right tool name, thickness and axis.
- प्राधान्यित साधन निवड मशीन बिट्सशी कशी जुळते2D CAM मोडमध्ये कटसाठी तुम्ही निवडलेले प्राधान्यित साधन तो कट कोणता मशीन बिट करेल हे कसे ठरवते ते जाणून घ्या.
- Set back panel grooving methodChoose whether back panel grooves are cut by sawing or routing.
- Set the preferred router tool for back panel groovesSet the default router tool for the Back Panel Groove operation in a CNC machine's settings, choosing from tools identified by name, diameter and axis.
- ड्रिलिंग फाइल्स डाउनलोड करण्यासाठी सेटिंग्जमध्ये CNC मशीन जोडाड्रिलिंग फाइल्स आणि DXF डाउनलोड करण्यासाठी Settings > Machine मध्ये CNC मशीन जोडा.
- Add CNC tools that match the machineEnter every tool the job uses with names and numbers that match the machine so CNC output can be matched and downloaded.
- Check a tool's type in machine settingsLook up the type assigned to each tool in machine settings to see why a routing tool cannot be listed as a sawing tool.
- Configure CNC machine as 5-face process with panel flipEnter only the saw tool details, including the tool name and thickness, in the machine settings.
- ड्रिलिंग फेसच्या संख्येनुसार CNC मशीन प्रकार कॉन्फिगर करातुमची मशीन किती फेस ड्रिल करते त्यानुसार CNC machine settings मध्ये मशीन प्रकार सेट करा.
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- पॅनेलवर पॅरामेट्रिक पॉकेट्स आणि डॉग-बोन कटआउट्स तयार करापॅनेलच्या पृष्ठभागांमध्ये मशीन पॉकेट्स करा, ती पॅरामेट्रिकपणे आकार द्या आणि डॉग-बोन व आडव्या कटआउट्ससाठी राउटिंग वापरा.
- CAM सेटिंग्जमधील ग्रूव्ह खोलीची सहनशीलता कट-लिस्ट ग्रूव्ह अचूकतेवर कशी नियंत्रण ठेवतेपॅनेलच्या 2D/CAM दृश्यात दाखवलेल्या ग्रूव्ह खोलीत सिस्टमने जोडलेली सहनशीलता कशी समाविष्ट असते आणि ती कुठे कॉन्फिगर करायची हे जाणून घ्या.
- Include side panel cuts in CAM outputInclude the panel cuts on the sides of a cabinet in the CAM output.
- Machine radius panels and grooving by editing panel constructionEdit the panel design at the construction level and apply the required tools and operations so the application generates the machine instructions automatically.
- Output top and bottom drilling in one CNC fileTurn off the Separate Top Bottom Files setting on a CNC machine so it outputs a single file containing both top and bottom drilling.
- Restrict a panel area from grooving or drilling via clamping obstructionDefine a restricted rectangular area on a panel in the Clamping Obstructions table so the software rotates the panel when a groove or drilling operation falls inside it.
- Set up a CNC machine with its machine type and settingsUse the Add Machine option and fill in the machine type and the settings the setup stores per machine.
- CNC आउटपुटमध्ये पॅनेल्स फिरवलेले (किंवा न फिरवलेले) का येतातAlways Rotate सेटिंग, Maximum Machine Depth आणि Min Panel Width हे CNC आउटपुटमध्ये पॅनेल फिरवायचे की नाही हे कसे ठरवतात, आणि ड्रिलिंग आरशासारखी किंवा चुकीच्या कडेला आल्यास काय तपासावे, ते जाणून घ्या.
- 2D Panel CAM Mode मध्ये ड्रिल जोडा आणि संपादित करा2D Panel CAM Mode मध्ये पॅनेलमध्ये ड्रिल जोडा आणि त्याची स्थिती, स्टेप्स आणि मशीन डेप्थ सेटिंग्ज संपादित करा.
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- मशीन साइड-सॉ टूल लिस्टमध्ये सॉ ब्लेड टूल रो जोडासॉइंग ऑपरेशन्स मशीनवर चालू शकतील यासाठी सॉ ब्लेड टूलचे नाव आणि ब्लेड जाडीसह सॉ ब्लेड टूल रो जोडा.
- Back panel grooves cut end-to-end in generated MPR filesLearn how back-panel grooves defined end-to-end in the design carry through to the generated MPR file and match the drawings on the MES portal.
- Check CAM hole depth in panel 2D CAM modeOpen the panel in 2D view and enter CAM mode to verify hole markings such as drawer channel or tandem depths.
- ड्रॉइंग डाउनलोड करताना क्लॅम्पिंग-क्षेत्राच्या इशाऱ्यांची तपासणी करावर्क ऑर्डरसाठी ड्रॉइंग किंवा मशीन फाइल डाउनलोड करा आणि कोणती ऑपरेशन्स प्रतिबंधित क्लॅम्पिंग क्षेत्रात येतात ते पहा.
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose a panel cutting strategy for CNC productionUse the panel-by-panel strategy for CNC cutting and avoid the single-step strategy when two panels are involved.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- Download and check CNC machine files before productionDownload the CNC output from the published work order, load it into the machine and verify it against the machine type.
- Download CNC machine output drawingsDownload drawings from the CNC machine output that show every panel with its machining details, using reference letters A, B, C and D to determine positions and depth.
- Draw the path before exiting to 3D view for the sweep toolDraw the sweep path before you exit to the 3D view, because the sweep cannot be applied without a defined path.
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Find the download buttons on a work order's CNC Machining tabLocate the Drawing and Machine Files buttons on each machine card and know which formats each machine offers.
- CAM ग्रूव्ह लांबी टॉलरन्स समायोजित करून ग्रूव्ह व्यवस्थित न कापण्याची समस्या सोडवाप्रोडक्शन फाइल्समध्ये ग्रूव्ह योग्यरित्या येण्यासाठी अॅडमिन CAM सेटिंग्जमध्ये ग्रूव्ह लांबी टॉलरन्स बिटच्या व्यासाच्या अर्ध्या भागावर सेट करा.
- Fix missing routing or drill tools in CAM outputAdd the referenced tools and refresh the cache so regenerated CAM output includes every tool the job uses.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- CNC आउटपुट तयार करताना टूल वेगळे असू शकते हे इशारे हाताळाCNC आउटपुट तयार करताना "tool may be different" इशारा का दिसतो आणि चुकीचे टूल निवडले असल्यास टूल मॅपिंग प्राधान्य कसे दुरुस्त करावे हे जाणून घ्या.
- Infurnia चे .nc G-code कसे मर्यादित आहे: R-arcs, cutter comp नाही, mm absoluteInfurnia च्या लहान G-code dialect चे निश्चित नियम जाणून घ्या, जेणेकरून त्याचे .nc output तुमच्या controller वर काय व्यक्त करू शकते आणि काय नाही हे तुम्हाला कळेल.
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- स्ट्रिप लाइट ग्रूव्हची खोली कशी सेट केली जाते आणि तपासली जातेस्ट्रिप-लाइट SKU ची ग्रूव्ह खोली पॅनेलवर ग्रूव्ह केला जातो की नाही, किती खोल, आणि CAM आउटपुटमध्ये निकाल कसा तपासायचा हे जाणून घ्या.
- Biesse CIX फाइल्समध्ये ORLST origin कसा निवडला जातोInfurnia प्रत्येक पॅनेलसाठी ORLST bed origin Default Machine Origin किंवा range-based origin table मधून कसा निवडते ते जाणून घ्या.
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- करवताची रुंदी मशीनच्या ब्लेडच्या रुंदीशी जुळवाबोर्ड लेआउट योग्य राहण्यासाठी वर्क ऑर्डरवरील करवताची रुंदी कटिंग मशीनच्या प्रत्यक्ष ब्लेड रुंदीवर सेट करा आणि करवत फाइल पुन्हा तयार करा.
- युनिट जवळीकीनुसार (C1, C2, C3) CNC फाइलींना नावे द्याबारकोडमधील CNC फाइलींना नावे देताना C1, C2 आणि C3 सारखी युनिट जवळीक लेबले वापरा, जेणेकरून प्रकल्पांमध्ये तीच नामकरण संकल्पना सुसंगत राहील.
- मोठ्या Biesse पॅनल्ससाठी प्रत्येक origin साठी Maximum Machine Depth ओव्हरराइड कराविशिष्ट origin रोला स्वतःची जास्त Maximum Machine Depth द्या, जेणेकरून मोठे पॅनल्स फक्त तिथेच स्वीकारले जातील.
- Set onion-skin passes and through-cut ordering in nesting NC programsControl whether through-cuts are machined in one pass or two, and know that they always run last in the program.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- मशीनने डीफॉल्ट नाकारल्यास पर्यायी MPR स्वरूप वापरून पहामशीन प्लॅटफॉर्मचे MPR योग्यरीत्या वाचू शकत नसल्यास, समर्थित इतर MPR प्रकार वापरून पहा आणि मशीन विक्रेत्याकडून कार्यरत असल्याची ज्ञात उदाहरण फाइल मिळवा.
- Panel 2D CAM मधील बदल उत्पादन आउटपुटवर कसा परिणाम करतात ते समजून घ्याPanel 2D CAM मोडमध्ये उत्पादनासाठी तुम्ही काय जोडू शकता आणि ते बदल 3D डिझाइनमध्ये का दिसत नाहीत, ते जाणून घ्या.
- Verify a nesting program with toolpaths and the NC simulatorOpen the nesting view on a single sheet to check raw or post-processed toolpaths, simulate the NC code and spot missing tools.
- मॅंडेटरी-फील्ड्स त्रुटीसह CAM सेटिंग्ज सेव्ह होण्यास का प्रतिबंध करतातCAM सेटिंग्ज मोडल तुम्हाला सेव्ह करू देण्यापूर्वी तुमच्या नोंदी कशा प्रमाणित करते ते जाणून घ्या.
- The .nc file मधील Z मूल्ये कॉन्फिगर केलेल्या Safe Z शी का जुळत नाहीतZ Origin Reference सेटिंग आणि through-cut clearance तुमच्या .nc file मध्ये लिहिलेली Z मूल्ये कशी बदलतात ते पहा, जेणेकरून तुम्ही योग्य file आणि खरी depth त्रुटी यात फरक करू शकाल.
साहित्य, हार्डवेअर आणि कनेक्टर्स49
- How connectors are assigned per scenarioLearn what a scenario is in connector setup and how it decides which connector is applied to a joint.
- Reduce a single panel's length using panel-level extensionShorten one specific panel by setting a negative extension on it at panel level in a construction style.
- Verify a completed design in QC modeOpen QC mode to see the materials, units and panels used in a completed design before verification.
- Add a connector to several units at onceAdd one connector to many units in a single pass by selecting the scenarios that need it in the Scenario view tab.
- Find and replace a material or edge band in QC ModeTrace which units and panels use a SKU and swap it for another across the design.
- Apply full or half overlay to selected scenarios before adding a connectorApply full or half overlay edits across all current scenarios in the design before adding a connector.
सर्व दाखवा (49)
- Change edge bands in bulk from the production sectionChange the edge band on a line item in the production section and the change applies to every instance of that line item at once.
- Create a new construction style and add all reductionsCreate a new construction style or reuse an existing one, then add all the required reductions including the bottom reduction.
- Inspect units and panels in the QC Mode tabsRead the Units and Panels tabs to see annotations, rooms and where each material came from.
- Read a design's Raw Material Lists and Cabinet Composite BOQLearn what each Raw Material Lists tab and the Cabinet Composite BOQ show, and how to compare lists by item name rather than Sno.
- Read a panel's machining and edge-band drawing in 2D Panel CAM ModeOpen a panel's 2D Panel CAM Mode to see its hinge cups, drill and contour legends, edge-band labels and view options.
- Use X-ray mode to verify drilling before publishingSwitch the production view to X-ray mode to check drilling details on a single component or the whole cabinet, then click X-ray again to return to the solid view.
- Automate connector counts with rulesTell the software how to handle connectors for a given connection so connectors are added by rule.
- Change drawer bottom and carcass panel material at panel levelChange the core material of a drawer bottom panel or other drawer carcass panels by editing the material at the individual panel level in the production portal.
- Correct wrong materials and push the change to productionFix excess or wrong material types in the design and re-sync the work order so production picks it up.
- Inspect assemblies with exploded view, X-ray mode and panel hidingShow an exploded view with an adjustable explode percentage, toggle X-ray mode to see through parts, and turn off individual panels to inspect internal structure.
- Manage connectors on ticked scenarios from the Actions menuPick a connector and apply it to the ticked scenarios, and use a connector card's three-dot menu for Publish, Filter for this, Replace and Remove.
- Replace a connector in the connector card in manufacturing settingsUpdate the connector in the connector card within manufacturing settings so production output uses the changed hardware connector, then confirm it appears correctly in the design.
- replace-and-selected नियम वापरून कनेक्टर बदलाएक कनेक्टर प्रकार दुसऱ्याने बदला आणि किती कनेक्टर बदलले गेले याची पुष्टी करा.
- Replace unwanted hardware in manufacturing settingsConfigure the correct replacement hardware so the unwanted item no longer appears in the output.
- Review board layout settings on the MES portalReview board layout settings on the MES portal.
- Tell how many of each item is requiredUse the material and hardware summary to see how many of each item a design requires.
- वॉर्डरोब बांधणी सेटिंग्जमध्ये बॅक स्कर्टिंग बंद करावॉर्डरोब बांधणी सेटिंग्जमध्ये बॅक स्कर्टिंग बंद करा, जेणेकरून ते कट लिस्टमध्ये दिसणार नाही.
- Understand the sliding wardrobe shutter system propertyLearn what the shutter system property controls in a sliding wardrobe.
- Verify connector placement and run a collision checkCheck that connectors are placed correctly and run a collision check.
- Visualise cabinet assembly with exploded viewsCreate exploded views to see how a cabinet goes together, then refresh admin settings to update columns and generate the CNC zip for machine upload.
- Visualise multi-finish shutters in the designSee how multi-finish on shutters can be visualised in the design.
- Add a finish condition to a panel glue manufacturing ruleAdd a finish condition to a panel glue manufacturing rule by setting the condition type to finish and choosing the tag operator 'equal to'.
- Add hardware to a box and handle closed-box warningsSelect hardware with an unpacked remainder, enter a valid quantity, and reopen a closed box if the warning appears.
- Add stability rails to wardrobes wider than 900 mmAdd stability rails as an option when a wardrobe is wider than 900 mm.
- Change material for specific panels using filter parametersFilter the panels in the finished materials view so a material change applies only to the units that match your criteria.
- Check and bulk-change core material by filteringFilter the materials view by core material to spot a wrong ply and swap it in bulk.
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Check where a panel's hardware came fromRead the connector source in the connector scenario view to tell whether a panel's hardware was inserted by a hardware rule or placed by hand.
- Define connector height ranges with an infinity upper boundDefine multiple bands for a connector's height range, including a final band with an infinity upper bound.
- Define custom LED strip sizes in the admin portalDefine any custom LED strip sizes in the admin portal so they are available for LED grooves in CNC output.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- Machine files do not output two separate groups for split shuttersWhen a shutter is split into two parts using a divisional shutter, the design and 3D view show two separate panels.
- Reproduce rejected panels using rejection recordsUse the rejection record kept for a rejected panel to reproduce it when remanufacturing.
- उत्पादन कनेक्टर आणि परिदृश्यांद्वारे हटवलेले हार्डवेअर पुनर्संचयित कराउत्पादन डिझाइनमध्ये डिझाइन उघडा, 3D आणि कनेक्टर आणि परिदृश्यांवर जा, आणि हटवलेले हार्डवेअर पुनर्संचयित करण्यासाठी कॅटलॉगमधून plain glass सारखी सामग्री पुन्हा नियुक्त करा.
- Set dummy panel depth to 0 mm to fix Gola cut on blind unitsSet the dummy panel depth to 0 mm so the Gola cut and shelf reveal on a blind unit come out right.
- Track edge banding, core material and finish in panel schedulesCreate and download panel schedules as CSV to track edge banding, core materials and finishes and spot panels with discrepancies.
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand the Modular Units Hardware tabSee what the Hardware tab lists for each cabinet, how rows are grouped, and how to check panel drilling details.
- Understand the two hardware lists for procurement and assemblyLearn how the procurement hardware list and the assembly hardware list differ and which one the assembly team should use.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- Verify a cabinet before sending it to productionCheck a cabinet's SKU structure against the rules before you send it to production.
- Work out strip light drivers and screws manuallyPlace strip lights manually in the drawing so the running length is known, then work out the correct driver rating and screw quantities separately.
- Work with connectors and scenarios in single unit CAM modeOpen a cabinet's CAM menu in the production design to reach Single unit CAM Mode (Panel by Panel), Connectors and Scenarios, then manage each scenario of the selected panel.
पॅनेल ट्रॅकिंग आणि स्टेशन्स37
- Open QC Mode and understand its tabs and work scopeEnter QC Mode, see which work scope it opens on, and learn what each of the four tabs shows.
- Track scanned panel progress in a work orderSee the progress of any scanned panel inside a work order, with green ticks for panels scanned at a station and panel-by-panel status within a project.
- Grant MES roles per user and load mapped stationsTurn on MES roles for individual users without admin rights and reload so mapped station data appears.
- Reject and remake a panel from the manual tableReject a panel and remake it, then regenerate the remake's outputs from the Rejections tab.
- Set up stations and operators for panel trackingStart tracking with one person at a chosen station and add stations and operators as work progresses.
- Understand exempt panels at edgebanding and CNC stationsLearn why some panels are not trackable at edgebanding and CNC stations and where they appear.
सर्व दाखवा (37)
- Understand Shipment page tabs and station permissionsLearn how the Shipment page's Loading and Unloading tabs depend on the stations mapped to you and what each view requires before you scan boxes.
- Add missing stations and print panel labelsReview the default stations for a new account, add any missing station from station settings, and print panel labels.
- Check per-panel station status on Order ProgressOpen the Order Progress tab to see each panel turn green as it passes each station.
- Create a custom-named station on a standard typeAdd a station by naming it and choosing one of the existing station types.
- Create MES users and stations with the right roles and typesSet up MES admins, MES operators and stations so tracking access can be assigned correctly.
- Deactivate tracking stations a factory does not scan atDeactivate any tracking station your factory does not want to scan at, and station types with no active station are left out of progress calculations.
- Filter tracking data by station status and download the listNarrow production tracking to panels by station status, then download the filtered list.
- चुकीच्या स्टेशन प्रकारासह तयार केलेले स्टेशन दुरुस्त करास्टेशनचा प्रकार तयार करतानाच निश्चित होतो आणि तो संपादित करता येत नाही, म्हणून योग्य प्रकाराचे बदली स्टेशन तयार करा, त्याचे ऑपरेटर तिथे हलवा आणि जुने स्टेशन बंद करा.
- Get an alert when a panel has already been scannedScan panels on the mobile app and the system alerts you when the same panel has already been scanned.
- Handle rejected panels: retired codes, remakes and undoLearn how a rejected panel's code is retired, how the panel is remade with a fresh code, and when a rejection can still be undone.
- प्रारंभ न झालेल्या पॅनेलची संख्या कशी मोजली जातेउत्पादन ट्रॅकिंगमध्ये प्रारंभ न झालेल्या संख्येत कोणते पॅनेल समाविष्ट आहेत आणि ती संख्या कधी बदलते ते जाणून घ्या.
- उत्पादन पोर्टल शॉप फ्लोअरवर QC ला कसा आधार देतोमूळ डिझाइन न बदलता उत्पादन पोर्टल गुणवत्ता-नियंत्रण तपासण्या आणि मशीनसाठी तयार आउटपुट कसे दाखवते ते पहा.
- How tracking records and statuses are storedLearn what each scan records, which tracking sources exist, and what item status shows.
- Map users to tracking stations and fix missing usersGive each MES user access to the stations they work at and understand why a user may not appear in the Operators list.
- Pick the station and scan panel labels on the phoneChoose the station on the phone before scanning, and only scan the panel's own label so the code is accepted.
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- Read tracked-panel counts per stationSee why counts differ between Panel Cutting, Edgebanding and CNC, and what a lower count at a later station means.
- Route projects to a factory or vendorConfigure machines per factory or vendor and route a project to the chosen one.
- Scan a panel QR to track it at a stationPoint the scanner at a valid panel label to mark the panel tracked at the currently selected station.
- Scan panels with a Bluetooth scanner or camera modeUse a slow-typing Bluetooth scanner or switch to camera mode, which shows each scan result as a self-clearing sheet on touch devices.
- Scan panels with a camera or hardware scannerUse the camera-based tracker at each station and know that every scan records its source.
- अॅडमिन पोर्टल आणि MES पोर्टलमध्ये प्रत्येक वापरकर्त्याचा प्रवेश सेट कराअॅडमिन पोर्टल आणि MES पोर्टल या दोन्हीमध्ये परवानग्या सेट करून प्रत्येक वापरकर्त्याला योग्य प्रवेश स्तर आणि MES भूमिका द्या.
- Set up an MES operator for tracking station scanningCreate the MES operator as a user in the admin portal with their email ID and map them to a tracking station before scanning can be used.
- Set up factory-floor tracking from workflow to first scanPlan your stations, create operators, assign them to stations and start scanning on Android devices.
- ट्रॅकिंग स्टेशन हटवण्याऐवजी ते बंद कराSettings > Configure stations मध्ये ट्रॅकिंग स्टेशन बंद करा, जेणेकरून ते ऑपरेटरच्या स्टेशन निवडकर्त्यातून निघून जाईल, पण त्याची ट्रॅक केलेली पॅनेल्स त्यांचा इतिहास टिकवून ठेवतील.
- Track panels manually from the Manual tableOpen the Manual table, pick a published work order and track the panels you need at the station.
- Track panels with a phone camera or the Manual viewUse a phone camera or pick panels in the Manual view when no hardware scanner is at hand.
- Understand station-scan gating and scan orderLearn that gating is all-or-nothing and that scanning out of sequence is not blocked.
- Understand the nine station types and how panels are trackedLearn which station types are scan stages, which are box-based, and how default and extra stations behave as one stage.
- Understand where scan summaries are shownLearn that the platform shows a browser summary of which panel was scanned at which station and at what time.
- QR स्कॅन का दुर्लक्षित होतो आणि 'Scan ignored' टोस्ट का दाखवतोअॅप स्कॅन स्वीकारण्याऐवजी 'Scan ignored — <reason>' टोस्ट का दाखवते आणि Tracking व Shipment पेजांवर प्रत्येक कारणाचा अर्थ काय, ते जाणून घ्या.
पॅकेजिंग आणि शिपमेंट24
- Create a box manually on the Packaging pageCreate a box manually on the Packaging page so the factory floor gets a packaging list to pack panels and box labels can be printed before packing.
- बॉक्स तयार करा, त्याचे लेबल प्रिंट करा आणि पॅकिंगसाठी तो बंद कराप्रोडक्शन इंटरफेसमध्ये बॉक्स तयार करून, त्यात पॅनेल्स जोडून, नंतर लेबल प्रिंट करून आणि बॉक्स बंद करून कट पॅनेल्स पॅक करा.
- How the Shipment/Order Status counts are derivedLearn how boxes, panels and hardware each count towards shipment progress on the Order Status page.
- पॅकेजिंग काउंटर वाचा आणि बॉक्स लेबल्स व याद्या डाउनलोड कराPackaging पेज हेडरमध्ये पॅक केलेले पॅनेल्स आणि हार्डवेअर ट्रॅक करा, नंतर Box Labels, Packaging List आणि Unpacked Panels PDF म्हणून डाउनलोड करा.
- Read the Shipment Loading view and open the Shipment SummarySee the selected shipment's status, loaded and pending boxes, and the actions available, then open its full Shipment Summary.
- Add panels to a box and print its label on the MES Packaging pageTick panels in the Manual panel selector, confirm adding them to a box, and print the box label to close it.
सर्व दाखवा (24)
- Add panels to a box with the Manual panel selectorFall back to the Manual panel selector to filter panels by core, finishes, edge bands and operations and place them without scanning.
- स्क्रीनच्या उजव्या बाजूला असलेल्या बटणावरून पॅकेजिंग बॉक्स तयार कराPackaging पेजवर वर्क ऑर्डरसाठी नवीन बॉक्स तयार करा, नंतर त्याचा लेबल प्रिंट करा आणि पॅकेजिंग पूर्ण करण्यासाठी तो बंद करा.
- Create a shipment for a work orderOpen the Shipment section for the work order, create the shipment with driver, vehicle, dispatch and receiver details, then scan box labels to mark them loaded.
- डिस्पॅचसाठी बॉक्स तयार करा, लेबल स्कॅन करा आणि शिपमेंट तपशील भरापॅकेजिंगसाठी Create new बॉक्स तयार करा, सर्व पॅनल ट्रॅक झाले आहेत याची खात्री करा, नंतर बॉक्सचे लेबल स्कॅन करा आणि डिस्पॅचसाठी आवश्यक असलेले प्राप्तकर्ता, चालक आणि वाहनाचे तपशील भरा.
- Enable the packaging page and map operators to a Packaging stationPublish the work order and map each operator to a tracking station of type Packaging so the page is active.
- Fix packaging scans that are ignoredOpen a box and clear the invalid-QR popup so the packaging scan listener accepts your scans.
- Fix "Panel is already in Box" errors and move panels between boxesLearn why a panel can sit in only one box, what the error means, and how to move a panel to a different box.
- Handle invalid codes and duplicate or closed-box scansRead the reason for an invalid code, pick the panel manually, and confirm before adding to a closed box.
- Load and unload boxes on the Shipment pageScan box QR codes to load and unload boxes, use the tabs and unload list, and revert actions without losing track of records.
- बॉक्स लेबल स्कॅन करून शिपमेंटसाठी बॉक्स लोड करातुमच्या मोबाइल फोनवर लॉग इन करा आणि डिलिव्हरीसाठी वस्तू लोड करण्यासाठी बॉक्स लेबल स्कॅन करा; कोणते बॉक्स अजून लोड करायचे आहेत आणि प्रत्येक बॉक्समध्ये काय आहे हे तपासा.
- बॉक्स लेबल प्रिंट करा आणि बॉक्स बंद करा, किंवा प्रिंट न झालेले लेबल दुरुस्त कराPackaging मधून बॉक्स लेबल प्रिंट करा किंवा लेबलाशिवाय बॉक्स बंद करा, आणि लेबल का गहाळ आहे किंवा जुने आहे हे शोधा.
- Print labels and close boxes for the project stepDownload the labels and packaging listings, then print each box label and close the box until all boxes are done.
- Print or save the Shipment Summary for the driverOpen the Shipment Summary from the Shipment page and print it directly or save it as a PDF to send to the driver.
- मोबाइल अॅपमध्ये बॉक्स स्कॅन करा आणि शिपमेंट सारांश पहाबॉक्स लोड झाला आहे का हे तपासण्यासाठी तो स्कॅन करा, नंतर मोबाइल अॅप्लिकेशनमध्ये शिपमेंट सारांश उघडा.
- Track packaging and shipment in order progressUse order progress to track packaging and shipment so you can trace components missing during shipment.
- प्रोजेक्ट पॅकिंग लिस्टसह पॅकिंग स्थिती ट्रॅक कराप्रत्येक प्रोजेक्टसोबत पॅकिंग लिस्ट तयार करा, जेणेकरून सिस्टम कोणत्या वस्तू अजून पॅक झालेल्या नाहीत हे दाखवेल.
- Track unpacked hardware while packing boxesUse the unpacked items list and remove hardware to return its quantity to the unpacked pool.
- Undo tracking and acknowledge a Panel Not Required alertUndo a tracking in one click from the success message or acknowledge the Panel Not Required alert.