Inspect units and panels in the QC Mode tabs
Read the Units and Panels tabs to see annotations, rooms and where each material came from.
The Panels tab lists panels separately, which is why panel counts typically exceed unit counts.
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
The Units tab also shows a Room column, so units can be inspected per room.
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
Panels that belong to a cabinet carry both the cabinet and the panel annotation (e.g. C3.P7).
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासलेCustom or independent panels show only the panel annotation (e.g. P7).
✓ २१ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
In QC mode the Panels tab can be searched and filtered by cabinet ID, panel type (e.g. shutter, back panel), laminate or edge band.
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
Searching the Panels tab by a panel type such as "Shutter Panel" lists all matching panels across the project; the header check box then selects them all.
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
Scrolling through the matching panels shows each panel's core material so a wrongly applied ply can be spotted.
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासलेShutters can be checked the same way by searching the shutter panel and reading its core material.
✓ १९ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासलेBack panels whose core source is the carcass core ('Carcass Core') follow the carcass material automatically; a back panel with its own core ('Custom Core', such as a 6 mm back) keeps it.
✓ २१ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले