Force a tool and finish adding a CNC machine

Map drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.

1. When two tools share the same diameter and the system picks the default, the tool used for drills and contours can be forced by editing the manufacturing JSON and adding a tool_names entry with the tool name. Setting the machine manufacturer field to "any" applies the tool on any machine that has a tool of that name; to target one machine, use that machine's id instead of its name. Machine ids are not shown in the UI, so use "any".

2. For a CNC machine, choose CNC as the machine type and Generic MPR as the output format when adding the machine in MES machine settings.

3. When defining a tool for a CNC machine, the tool's allowed direction is chosen from a dropdown that includes an "All Allowed" option as well as restricted directions, alongside the tool number and diameter.

4. When adding a machine in MES machine settings, after choosing the machine type (cutting or CNC) and the machine category, you pick the output format (for example PDF or CSV) and then enter a machine name.

5. The machine name entered when adding a machine in the production setup is free text, so it can be named after the group of panels it covers.