Production
Guides : 480 · Sections : 10
Configuration et flux de production53
- Lock the design to prevent clashes between design and production editsLock the design when a designer and a production person may edit it at the same time, so the designer cannot make changes until the admin or design head unlocks it.
- Partager le même design ou créer une copie de design de productionDécidez si vous partagez le même design pour que les modifications se synchronisent automatiquement ou si vous créez une copie de design de production qui reste indépendante.
- Choose copy or share when sending a design to productionDecide whether to create a production design copy or share the same design when sending a design to production.
- Send a design from the design portal to productionCreate the design and drawings in the design portal, then hand it to the production portal for checking before it reaches the shop floor.
- Comprendre comment les designs partagés apparaissent dans Production DesignsDécouvrez comment un design envoyé avec Share Same Design apparaît dans Production Designs du portail de design et comment il reste lié à son design.
- Comment les designs passent du portail de design au contrôle qualité de production et au MESSuivez un projet depuis le portail de design, en passant par le contrôle qualité de l'équipe de production, jusqu'au portail MES, où ses résultats deviennent disponibles.
Tout afficher (53)
- Publish a work order so it appears in the MES portalPublish or republish a design so its work order becomes available to the factory team in the MES portal.
- Create a production design in copy modeCreate a production design in copy mode instead of share mode.
- Créer un périmètre de travail et accéder à la liste de découpe dans le portail de conception de productionCréez un périmètre de travail pour une zone spécifique afin de générer sa liste de découpe et d'accéder à la nomenclature des matières premières.
- How the production workflow runs from design to work orderFollow how a finalised design moves through production and into the work order, carrying its materials with it.
- How work orders are created and republished from design filesLearn how each design file sent to production becomes its own work order, how updates republish it, and why components stay together.
- Publish a production design as a work orderApply the hardware and connector selections on the production design, then publish it as a work order.
- Actualiser le cache de sortie et resynchroniser après des modifications du catalogueAprès avoir modifié les réglages de finition ou de matériau de cœur, actualisez le cache de sortie afin que le fil et les propriétés de matériau mis à jour parviennent à la liste de découpe et à l'implantation des panneaux.
- Access production design from the main appReach production design from the main app rather than a separate production-design subdomain or portal.
- Batch rooms into one work order with work scopesUse work scopes to combine several rooms into one production run or split them into separate work orders.
- Edit channels in production design without returning to designCorrect a channel directly in the production design module after a design has been sent to production, without going back to the design module.
- Edit connector and construction changes through production designSend the design to production from Outputs, create a new production and open the production design so you can review and modify connector scenarios there.
- Générer des listes de débit et des sorties de production à partir de la conceptionPassez de la conception à la production en un seul flux, en générant les listes de débit, les listes de quincaillerie et les guides d'installation à partir du modèle plutôt qu'à partir de dessins CAO 2D séparés.
- Publish a checked cut list to a work orderPublish a confirmed cut list so you can download the work order and get the final cutting list and machine outputs.
- Publish a job to the MES portalPublish the job to the MES portal from the production design portal so it reaches production.
- Republish a design so the work order cut list is up to dateMake or verify a change in the production design and republish it so the work order cut list picks up the updated values.
- Resynchroniser un design de production à partir de son design sourceResynchronisez un design de production à partir de son design source pour ajouter, supprimer et modifier des unités, en examinant l'impact avant de confirmer.
- Understand what a workscope is in Production > Work ScopesLearn what a workscope covers and how separate workscopes are set up for the outputs you need.
- Update and resync a design to push it to productionUpdate the design and use the resync feature to push it to production.
- Verify materials with QC and create a work orderCheck that core, finished and edge band materials are correctly applied, then create a work order and download its outputs.
- Add machines after publishing and refresh the machine listAdd a beam-saw or CNC machine in Settings > Machines and make it appear on the published work order without republishing.
- Choose which stages a job usesDecide which station types contribute to progress and leave out Packaging and Shipment for smaller jobs.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Download technical documentation summary from production portal after transferGet a technical documentation summary covering part codes, dimensions, materials, finishes and edge band specifications after transferring a project to production.
- Find CAM mode in Infurnia Production, not DesignLearn where CAM mode is available and why cabinets no longer show it while you work in the Design module.
- Find your way around a production design copy's Production tabOpen a production design copy and use the Production tab toolbar and the Differences between work order and design dialog to compare the work order with the design.
- How work order numbers are assignedLearn that the work order number shown in the project is assigned by Infurnia and cannot be edited by the user.
- Limit a scenario change to the current designScope a construction or CAM scenario change to the current design instead of applying it globally.
- Pack panels into boxes and ship themScan panels into a box on the Packaging page, then complete shipment by scanning the box.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Publish a work order to unlock downloadsPublish the work order so its downloads become available and an immutable published design version is created.
- Actualiser les paramètres CAM depuis l'administration avant de générer la sortie machineRécupérez les derniers paramètres CAM configurés par l'administrateur et appliquez-les afin que votre sortie machine se télécharge sans violations.
- Refresh cutlist settings from Admin and republishPull the latest cutlist settings from the Admin portal and republish the design so updated production files can be downloaded.
- Actualiser les paramètres depuis l'administration et les appliquer avant de télécharger les sortiesActualisez les derniers paramètres d'administration, appliquez-les, puis téléchargez les fichiers de sortie pour confirmer que les sorties ne présentent pas de problèmes majeurs.
- Resize a unit without breaking MES calculationsChange a unit's dimensions in the design and its production calculations follow the updated size, because it stays the same unit.
- Vérifier un design avant la publication vers MESUn responsable de production vérifie le design et peut modifier des valeurs telles que le premilling avant sa publication vers MES.
- Review designs in the production design portal before a work orderBefore a work order is created, use the production design portal to review the design construction-wise.
- Review what changed and when in production design versionsOpen the Versions & History dialog in the production design to see each change with its action, timeline and user, so you can review what was changed on a given day.
- Send a design to production from the homepageOpen the three-dashes menu on the homepage and choose Send to Production to send your design to production.
- Send designs for production via email from the portalSend a design directly by email from the portal so it reaches production.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.
- Partager un lien de design de productionUtilisez le lien de partage simple comme lien de design pour les designs de production.
- Désarchiver un design de production depuis la liste ArchivedReplacez un design de production archivé dans In Progress depuis la liste Production Designs > Archived.
- Comprendre le rôle du concepteur de productionDécouvrez comment le concepteur de production fait le lien entre le concepteur et l'équipe de l'usine et vérifie les conceptions avant la production.
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- Use consistent project naming so production can identify the jobTrack each job through production by relying on the project name, designer and status.
- Use Outputs > Production Settings in the design editorOpen Outputs > Production Settings to refresh the cache, check for overlapping modular units and reassign unit, panel and cabinet finish annotations.
- Vérifier la liste de découpe et envoyer le projet au MESUne fois un design finalisé, vérifiez la liste de découpe et envoyez le projet au portail MES pour la production en usine.
Ordres de fabrication et publication31
- Download board layouts, labels and pasting reportsDownload the board summary and layout files for every board type, and get panel labels, sheet labels and pasting reports as separate downloads.
- Exclure des panneaux de la sortie de productionExcluez des panneaux de la liste de débit et du planning en sélectionnant un sous-ensemble ou en les masquant avant l'envoi en production.
- How saw file formats are chosen for the production machineLearn how the production machine's output type decides the saw file format and what the beam saw operator should check.
- Verify edge bands and cutlist before productionCheck edge bands, back panels and cutlist output in QC Mode before releasing the design.
- Download files from a published work orderOpen the published version of a work order to download raw-material CSVs and machine saw files.
- Résoudre les collisions depuis la liste des violationsÉliminez une collision en ouvrant la liste des violations et en utilisant l'action de résolution des collisions à cet endroit, où les marqueurs de collision sur le modèle correspondent aux entrées de la liste.
Tout afficher (31)
- Résoudre les collisions de perçage en décalant la largeur de la cloison ou en résolvant les collisionsVérifiez les violations de perçage et de panneau de collision de perçage en mode CAM d'unité unique, puis utilisez solve collisions pour les problèmes plus importants.
- Vérifier pourquoi un élément est exclu de toutes les sortiesPassez en revue les raisons d'exclusion une par une pour trouver pourquoi un élément manque dans toutes les sorties.
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- Download a machine cutlist and handle unsupported formatsOpen the Cutlist tab, pick a panel-saw machine and fall back to CSV when the machine's format is not supported.
- Find and open board layout violationsSpot board types with violations and open the read-only violations view to see the offending panels.
- Corriger les violations signalant des collisions entre panneaux, quincaillerie et étagèresDécouvrez ce qui déclenche une violation dans la conception et comment la résoudre automatiquement ou manuellement.
- Generate a board layout and choose Accept, Abort or Re-generateOpen the Board Layout tab to start generation, then decide whether to accept the best layout so far, abort the run, or force a fresh regeneration.
- How output quantity above 1 duplicates panels with _1/_2 labelsSet a cabinet's output quantity above one and see how its panels are laid out and labelled as copies while sharing a single CNC file per panel.
- Lire les violations de conception dans la liste des violationsOuvrez la liste des violations pour examiner les violations en attente avant de générer la sortie de production.
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
- Verify cut list and clear violations before sending to factoryQuality-check the board layout and review the cut list of panel sizes before a design goes to the factory.
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- Vérifiez les violations de publication pour trouver les panneaux dont les dimensions sont nulles ou non validesPubliez la conception et consultez la liste des violations avant de télécharger les fichiers de production afin de trouver les panneaux dont les dimensions sont nulles ou non valides.
- Choisir les modèles d'étiquettes de panneaux et de feuilles dans un ordre de fabrication publiéPubliez un ordre de fabrication pour rendre les autocollants et les paramètres d'étiquette disponibles, puis choisissez les modèles d'étiquettes de panneaux et de feuilles par défaut pour son plan de découpe.
- Désactiver des unités en masse dans Edit Work Scope > Show UnitsDésactivez une unité avec Bulk Disable et voyez-la passer dans Removed Units avec un statut remplacé sur sa carte.
- Télécharger un PDF de liste de débit lorsque le design comporte des violations en attenteTéléchargez le PDF Cut List même lorsque le design comporte encore des violations en attente, après avoir vérifié la portée et les contrôles couverts par ces violations.
- Télécharger un ordre de fabrication avec des violations en attenteLorsqu'un ordre de fabrication comporte encore des violations en attente, le portail MES vous avertit avant le téléchargement que les sorties peuvent être incorrectes et vous laisse choisir quoi faire.
- Download board summary, layout PDF and hardware BQ after publishingAfter publishing a design, download the board summary PDF, the layout PDF and the hardware BQ so procurement and assembly have the correct documents and hardware list.
- Download the board layout as CSV and PDFOnce all quality-control checks pass, download the layout as a CSV file and a PDF for use in manufacturing.
- Exempt violations to hide production errors from designersHide production issues and errors from designers by exempting violations in the admin settings.
- Récupérer des unités après qu'une resynchronisation a modifié la portée des piècesLorsqu'une resynchronisation avec le design source semble supprimer des unités, vérifiez la portée des pièces indiquée dans la confirmation et récupérez les unités depuis 'Units removed from manufacturing'.
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- Resynchroniser une branche PD et conserver les modifications des deux branchesResynchronisez une branche PD pour qu'elle soit mise à jour tout en conservant les modifications effectuées dans les deux branches, sachant qu'une modification conflictuelle de la branche PD est abandonnée.
- Review and accept admin setting differences on a work orderSee which work order settings differ from the admin values and accept them to continue to the Violations check or a CNC machine-files download.
- Résoudre les collisions dans la conception de productionLancez Solve collisions depuis Violations pour déplacer les connecteurs de la valeur définie dans CAM Settings et examinez chaque modification.
Colonnes et paramètres de la liste de coupe65
- Personnaliser les colonnes de la liste de coupe et inclure l'épaisseur du chantConfigurez les colonnes de la liste de coupe souhaitées et décidez si l'épaisseur du chant entre dans les calculs.
- Afficher la dimension de coupe à côté de la dimension finie dans la liste de coupe de productionActivez les colonnes de coupe facultatives pour que la liste de coupe affiche la dimension à couper avant le chant à côté de la dimension finie du panneau.
- Comment l'épaisseur du chant affecte la taille finie du vantailDécouvrez comment le placage de chant est appliqué par panneau et où son épaisseur est indiquée dans le réglage de chant du panneau.
- Afficher Cut L et Cut W pour le pré-usinage et les chantsAjoutez les colonnes Cut L et Cut W pour que la liste de débit affiche la dimension de coupe à côté de la dimension finie.
- Enable cutting size and edge banding columns in cut list to verify panelsTurn on the cutting size and edge banding columns in the cut list so you can check that panel sizes match your edge band and premilling settings.
- Get CAM details, cut list and raw material BOQ from a production designProduce CAM details, the cut list and the raw material BOQ together from a production design, scoped and downloaded as you need.
Tout afficher (65)
- How panel sizes include edge band and laminate in the cut listLearn how the Finished Size and Cut Size columns in the production cut list differ, and which size CAM output uses.
- Obtenir une liste de débit du caisson seul en masquant les panneaux de façadeMasquez les panneaux de façade avant de générer la liste de débit afin que seuls le caisson et les côtés visibles soient exportés.
- Fix panel size discrepancies caused by edge band thicknessMake sure the edge band's actual thickness value is correct, because the software calculates panel size from it rather than from its name.
- Get edge banding quantity from the softwareAdd the exact edge band you use to the setup so the software can give you its quantity.
- Show edge band, panel name and size columnsTurn on the edge band column and read panel name, finished size and cut size in the cutlist.
- Ajouter des libellés personnalisés aux panneaux et les afficher dans la liste de découpeAjoutez des libellés personnalisés aux panneaux, y compris les panneaux personnalisés, et faites-les apparaître dans la liste de découpe et sur les étiquettes en activant la colonne des libellés personnalisés.
- Ajouter des libellés personnalisés via les propriétés de libellé pour les éléments qui se chevauchentAjoutez un libellé personnalisé via les propriétés de libellé lorsque les libellés se chevauchent sur une mise en page, et placez-le où nécessaire.
- Choose what prints as the panel name on labelsSet the panel-name element on a label template so the printed label, preview and machine files show the design name, the custom label or a combined name.
- How edgeband lengths in the BOQ are calculatedSee how extensions, edge profiles, pre-milling, cut shapes and wastage adjust each band's BOQ length so you can reconcile the totals.
- How mapped edge band thickness drives cut list dimensionsLearn how the edge band thickness mapped to a material directly affects the cut list dimensions.
- Comprendre comment les panneaux de la liste de débit sont ordonnés et regroupésDécouvrez comment la liste de débit de production présente les panneaux meuble par meuble par ordre croissant et comment afficher la pièce de chaque panneau.
- Choose the cutlist type and export the cut list CSVSwitch the cutlist type on the Cutlist tab and export a CSV that follows the selected type for beam saw machines.
- Configurer les colonnes de la liste de coupe et la précision des dimensions dans les paramètres de productionActivez les champs de liste de coupe dont vous avez besoin et définissez la précision des dimensions pour que la sortie de production arrondisse les dimensions comme vous le souhaitez.
- Télécharger une liste de découpe depuis la vue de productionTéléchargez la liste des panneaux au format Excel ou PDF depuis la vue de production et consultez ses colonnes.
- Read panel dimensions in the cut size columnFind each panel's dimensions in the cut size column of the cut list.
- Understand cut edgeband on panels with cut or slanted edgesLearn when a panel carries a cut edgeband and why rectangular panels correctly show 'No Edgeband'.
- Generate and download a cut list with cut length and edge bandsGenerate a cut list from the production module and download it, enabling parameters such as cut length and edge bands before generating.
- How cutting size is calculatedLearn how cutting size subtracts edge banding and pre-milling from the panel dimension.
- How shelf depth is calculated in cut listsLearn how an adjustable shelf's depth is derived from the carcass depth, the shelf reveal and the back panel offset.
- Set board sizes, offcuts and saw width in Board Layout SettingsGive each board type its sheet sizes and stock offcuts, set the cutting type and saw width, and override the size for a single board when needed.
- Set pre-milling type and read edgeband columns in the MES cutlistChoose how pre-milling is applied and read each edge's band and cut length in the MES cutlist.
- Understand shutter sizing in a child partitionLearn why a shutter added to a child partition takes its size from that partition rather than the overall unit height.
- Understand skirting notches on wardrobe carcass side panelsLearn which units get skirting cuts on carcass side panels, how each wardrobe type maps its cuts, and what to check when a notch is missing.
- Add Combined Label and room name columnsTurn on the Combined Label and room name columns and move room name to the top of the cutlist.
- Change the cabinet code shown in cutlist outputsEdit the cabinet code field's display name in the Homag or Biesse tab of Cutlist Preferences so your cutlist outputs show the column name you want.
- Check which downloads need a published work orderSee which footer downloads stay disabled on an unpublished work order and which ones remain available.
- How cut dimensions relate to finish dimensionsLearn when a panel's cut length and width match its finish dimensions and when edgebanding makes them differ.
- How cutlist and board layout accuracy settings control decimal placesLearn how the accuracy control in cutlist settings and board layout settings decides how many decimal places sizes are shown with.
- How cut list panel names use unit and panel codesLearn how each cut list panel is identified by a unit code plus a panel number and how that identifier links back to the 3D model.
- How the Room Name field in cutlist labels is filledLearn where the Room Name field in the cutlist/label export gets its value and what it shows when a project has no room defined.
- Identify rooms in the cut list without renaming cabinetsShow the room name as a separate column in the cut list so you can tell which room each cabinet belongs to without changing the cabinet name.
- Limiter une liste de coupe à une seule pièce avec un périmètre de travailCréez un périmètre de travail pour une seule pièce afin que la liste de coupe ne reflète que les meubles de cette pièce.
- Open Cutlist Settings and apply column changesOpen Cutlist Settings from the cutlist header and apply visibility, naming and order changes per cutlist type.
- Review cut list by cabinet then panel detailsOpen a cabinet's cut list, check each panel's details and mark panels verified, and view the unit visually to confirm rails, shelves and back panel position.
- Set pre-milling type by edge-band thickness or for all panelsChoose whether pre-milling follows each panel's edge-band thickness or applies the same setting to all panels, then save and recalculate to verify the cutting length.
- Set the grain convention and show grain in panel infoChoose how grain is labelled and see the Grain row in the board layout's panel info.
- Understand fixed shelf depth and partition dimensionsLearn that the partition refers to the space within the carcass, not the outer panel, when reading fixed shelf depths.
- Add extra custom columns to a cutlist exportLearn how many extra custom columns you can add beyond the standard fields when exporting a cutlist for a third-party saw or ERP system.
- Change a panel's core in QC mode > Panels > Modify PanelsSet a panel's Core Material Source and, when you need a different core for that panel alone, switch the Source to Custom and change it.
- Change the cabinet code label in cutlist preferencesChoose the Cabinet Code field for cutlist output and set its display name on the Homag, Biesse or Basic tab.
- Choose between a full top panel and half railsLearn how a full top panel uses more material and gives different panel sizes than half rails.
- Control cut list columns and their exported orderFilter rows with the search box and set column visibility, names and order so the export matches the screen.
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- Enable material code column to group cutlist by core materialUse the material code column, which carries core material information, to group the cutlist by core material.
- How back panel material assignment affects finish sheet countLearn why a finish can show more sheets than expected when a back panel uses a different material from the carcass.
- How board layout dimension accuracy worksLearn what the board layout dimension accuracy setting under Display settings controls and what it does not change.
- How construction edges change carcass panel sizes in the cutlistLearn how the inset or outset choice at each shared carcass edge changes panel sizes in the cutlist.
- Read part codes and part names in the cut listLearn how the part code and part name in the cut list tell you which cabinet and which panel a row belongs to.
- Remove cut length and cut width columns when pre-milling is usedHide the cut length and cut width columns from the cut list display when pre-milling makes them unnecessary.
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- Set dimension accuracy and header options per cutlist typeSet dimension accuracy to 1 mm and switch on project and store header rows for the cutlist type you are working with.
- Set elevation preferences in the admin portalControl which panels appear as additional manufacturing details in elevations by setting the elevation preferences in the admin portal.
- Configurer une machine à panneaux avec sortie CSV et colonnes choisiesConfigurez une machine à panneaux de découpe pour produire une liste de découpe CSV avec les colonnes dont vous avez besoin, en commençant par le code de pièce.
- Show client name and work order code columns in the cutlistSwitch on the client name and work order code columns in the cutlist field settings so they appear alongside the room name.
- Show material code alone by turning off finish columnsCombine the core material code with the external and internal finish codes into one material code and hide the separate finish columns for a more compact cutlist.
- Comprendre la liste de débit Basic et trouver les panneaux d'un meubleDécouvrez ce que montre la liste de débit Basic, quand les colonnes Operations et Quantity apparaissent, et comment y rechercher les panneaux d'un meuble.
- Understand why PVC skirting is not on the cut listLearn that PVC skirting is bought readymade, so it is never cut from wood and never appears in the cut list.
- Use pre-milling to compensate for edge-band thicknessApply a per-side pre-milling allowance instead of cutting panels oversize, and decide whether your factory needs pre-milling at all.
- Quand la colonne de pré-fraisage est nécessaire dans la liste de coupeDécouvrez quand la colonne de pré-fraisage de la liste de coupe est requise et quand elle n'est utile que pour les panneaux dont le réglage de pré-fraisage diffère selon le chant.
Sortie de la liste de coupe et formats machine52
- How Infurnia CSV cut lists work for NC and beam saw machinesLearn what the Infurnia CSV file for NC or beam saw machines contains and what it leaves to the machine.
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- Télécharger la liste de coupe et les sorties de matières premières depuis l'ordre de fabricationPubliez l'ordre de fabrication, puis téléchargez la liste de coupe, la liste des matières premières et les plans de panneaux depuis le portail de production.
- Match each machine Output selection to its file formatSee which file extension each machine Output selection produces, from .mpr and .cix to .nc, .xml and .dxf.
- Téléchargez les listes de découpe et les plans de panneaux, puis triez par matériau de cœurTéléchargez vos documents de liste de découpe et de plan de panneaux depuis la version publiée, puis triez le CSV par matériau de cœur pour obtenir les listes de découpe des types de panneaux spécifiques.
- Générez des plans de découpe, des listes de coupe et des fichiers CNCObtenez des plans de panneaux, des listes de coupe et des fichiers CNC pour vos scies et vos machines.
Tout afficher (52)
- Générer des listes de matériaux, de quincaillerie et de BOQProduisez des listes de matériaux, de quincaillerie, de types de panneaux et de BOQ pour l'approvisionnement et la vérification.
- Add a machine in MES machine settingsAdd a machine by choosing its type, category and output format, then enter its name and settings.
- Choisir les colonnes de la liste de coupe et exporter un planning de panneaux au format CSVChoisissez les colonnes de la liste de coupe à afficher parmi les 62 disponibles, puis exportez un planning de panneaux au format CSV avec sa ligne d'informations et les longueurs de chant.
- Download profile cutting lists and board-based material listsDownload the Profile Cutting List and the board-based wooden raw material list from their download groups.
- How drill information and the cut list come from hardwareLearn how the hardware you define in the design produces drill information and the cut list.
- Understand what the Raw Materials page shows and where it comes fromSee what the Raw Materials page covers and why its sheet counts depend on the board layout and its violations.
- Download a raw material summary for a completed projectDownload a raw material summary of core, finish and edge band material once the project is complete.
- Explore the Board Layout footer, optimization settings and outputs in MESLearn what the all-board-types footer, Optimization Settings, Exploded View output and Cutlist type dropdown offer in an MES work order.
- Get a screw-level hardware list from production outputSee how production output gives you a basic hardware list, and how configuring hardware setup lets it detail individual items such as which screw is used and how many are required.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- Lire les positions de perçage, la légende et les styles de ligne sur un PDF de plan de panneauDécouvrez comment le PDF de plan de panneau manuel indique la position, la taille et le type de chaque perçage afin de pouvoir le lire en atelier.
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- Vérifiez les formats de fichier acceptés avant de choisir la sortie machineConfirmez les formats de fichier acceptés par votre machine avant de choisir un format de sortie, puis essayez les sorties compatibles proposées par la plateforme.
- Check the cut list by downloading summary and board informationDownload the summary and board information to check the cut list.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure cutlist export options and pre-millingSet dimension accuracy, quotes, header rows and pre-milling values so exported cutlist values come out correct.
- Confirm the format a machine accepts before exportingCheck the machine's supported format before exporting cut list and production data, and plan a CSV workflow when DXF carries geometry only.
- Download a machine-specific cutlist from Custom CutlistPick a panel-saw machine from the Custom Cutlist menu to download the cutlist formatted for that machine.
- Download a PDF of the production layoutDownload a PDF of the production layout from the toolbar in the production layout view.
- Download CNC file as a zip and upload it to the machineDownload the CNC file, extract the zip and upload the extracted file to the CNC machine.
- Download countertop information as an Excel fileDownload the countertop information as an Excel file so you can review it or use it further.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Download machine files for a CNC machineDownload the machine files for a CNC machine from its Machine Files download option, and use the menu beside it for DXF output.
- Download optimization XML and label outputsRun optimization to generate an XML file and label outputs, then confirm and download them from the optimization results for downstream machine and production consumption.
- Download project outputs as PDF or XLSGenerate project outputs and download them in either PDF or XLS format, with a single module's output showing panels, hardware, sizes, material and finish.
- Download raw material and hardware requirement sheets separatelyDownload separate requirement sheets for wooden raw materials and hardware raw materials from the production tab.
- Download raw material list as PDF or CSVGet the plan and quantity for each item, then download the raw material list from the MES work order as a PDF or CSV files to hand to the factory team.
- Download saw files, board layouts and panel labelsGet the saw XML, board layout PDFs and panel labels from the published work order.
- Download saw files from the board layoutDownload saw files for the beam saw machine and get one zip with a separate file per board type, so each board can be cut without further splitting.
- Download saw files, nesting files and panel labelsUse the footer menus to download machine-formatted files and numbered labels for the current scope.
- Download the board layout PDF and cut panels on a tabletDownload the board layout PDF from a published work order to hand to the factory as the cutting instruction, then cut and label each panel on a tablet.
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- Fonctionnement de la configuration de la machineDécouvrez comment la configuration de la machine est définie une fois et réutilisée pour toutes les tâches futures.
- How the Profile Cutting List and Profile 1D Layout are generatedLearn how the Profile Cutting List is generated from the sizes entered for glass shutters with profiles all around, and how the Profile 1D Layout shows each profile piece cut from the stock length and what remains.
- Faites correspondre le format d'export de la liste de débit à votre machine de sciageChoisissez un format de fichier de liste de débit reconnu comme compatible avec votre marque de scie, afin que les panneaux importés conservent leurs dimensions correctes.
- Open the raw materials output and download lists as CSV or PDFOpen the raw materials output from the outputs tab and download the material and hardware lists you need.
- Pull latest Tool and CNC settings from AdminRefresh Tool and CNC settings from the Admin portal into the current work order via Settings.
- Télécharger à nouveau le fichier SAW depuis l'ordre de fabrication avant de diagnostiquer un écartTéléchargez à nouveau le fichier SAW depuis l'ordre de fabrication afin que la machine lise les dimensions actuelles du design et non un export plus ancien.
- Voir les quantités de matières premières par pièceCréez un périmètre de travail distinct pour chaque pièce et basculez entre eux dans la section Raw Materials.
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- Understand hardware quantities rounded up to whole setsLearn why per-set hardware quantities in the Raw Material list are rounded up and how to check a quantity that looks too high.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Understand what the Pasting Report PDF showsLearn what the downloadable Pasting Report PDF contains for full-size boards and cut sheets.
- Use KD XML format for cutting filesChoose KD XML as the output format when you generate cutting files for cutting operations.
- Quel fichier de sortie fournir à chaque équipe de productionFournissez à chaque équipe de production le fichier de sortie dont elle a besoin : le fichier XML saw pour la découpe, les PDF panel material et hardware pour l'achat, et le BQ composite cabinet pour l'assemblage.
Disposition des panneaux et imbrication69
- Partager le plan de découpe et le rapport de matières premièresPartagez le plan de découpe et le rapport de matières premières d'une conception de cuisine pour compter les façades et les panneaux sur chaque panneau de matière et confirmer qu'aucun n'est oublié.
- Comment la plateforme génère un plan de panneaux de production pour la découpe de panneauxDécouvrez comment la plateforme produit un plan de panneaux de production que votre équipe d'atelier peut suivre pour la découpe de panneaux.
- Enable stacking per work order and set maximum stack heightTurn on stacking for a work order and set how high boards may stack in its board layouts.
- How the Half / Fractional Sheet Split Gap worksLearn what the Half / Fractional Sheet Split Gap measures, its default value, and which utilization modes enable it.
- How board layout counts boards by material and panel typeLearn how board layout counts boards from the materials and panels defined in the catalogue and lists the requirement for each panel type.
- How grain direction affects board layout optimizationDefine grain direction for each finish so panels are placed according to their grain when the board layout is optimized.
Tout afficher (69)
- How grain direction affects sheet count in nestingLearn why a grain or directional finish forces panels to nest in a fixed orientation and how that can raise the number of sheets you need.
- How panels of different colours or finishes are nested on separate boardsLearn how board layout groups panels by material and finish, so units with different colours or laminates are nested on separate boards.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Read the legends and review panel details before productionUse the legends and PDFs to check grain direction, grooving, edge bands and material details before cutting.
- Rotate a panel to fit while respecting grain directionFit a panel that does not match the board layout by rotating it, and override its grain direction when vertical grain would block the rotation.
- Set dimension accuracy and compare fractional-sheet wasteChoose the dimension accuracy for the layout output and use the waste percentage to compare layouts.
- Change board size or blade settings to recalculate board requirementChange the board size or blade settings and the board requirement is recalculated.
- Configure small-part rules and the split marginDecide when a part counts as small, how far it stays from sheet edges, and how wide the split margin is.
- Control sheet ordering, fractional sheets and where settings are editedSet sheet ordering, the minimum free length for fractional sheets, and adjust these options from inside a project.
- Download and share the board layout and board summary PDFsTake the board layout and board summary PDFs from the footer and forward the layout to the factory or a manufacturer.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- Edit a work order board layout after generationChange a work order's board layout by hand after it has been generated instead of keeping it locked to the production design it came from.
- Edit board layout to move panels and rotate with space barReposition panels between boards in Edit Layout, rotate them with the space bar, and re-sync so two sheets fit on one board.
- Fix an oversized panel by splitting itSplit an oversized panel in the design portal so it fits the board and is included in the layout.
- Fix grain-direction rotation refusalsCorrect a wrong-running grain at the panel's grain declaration instead of rotating it on the sheet.
- How board layout groups panels into board typesLearn how a design's board layout groups panels into board types and proposes a least-waste layout.
- How fractional sheet settings split a sheetLearn how fractional sheet settings divide a sheet by a set fraction, such as a 250 mm fraction or a 50/50 split of the length.
- How grain flags on finishes control panel rotation in board layoutLearn how a panel's grain requirement comes from the grain flag on its finish and why a grained panel is not allowed to rotate in board layout.
- How stacking height limits stack count in board layoutLearn how the maximum stacking height setting in board layout / MES output determines how many boards fit in one stack.
- How the board-layout margin worksLearn what the board-layout margin defaults to, when it is applied and where you can change it.
- Inspect, move and discard panels in a design's Board LayoutClick a panel to see its Panel info, drag it to move it on the sheet, and use Discard Changes to put the layout back.
- Mark all panels of a cut sheet as tracked in bulk from board layoutMark every panel on a cut sheet as tracked in one action when the operator has not scanned each panel individually.
- Optimize board layouts for units automaticallyLet the software calculate board layouts and wastage for units such as vanities and wardrobes, with the option to adjust manually.
- Read and edit board layouts in ProductionOpen Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
- Read panel codes and labels on a board layoutEach panel on a board layout carries a panel code and a label, so the operator can paste the correct label on the correct panel after cutting.
- Regenerate board layout after turning off panelsTurn off all panels except the top and shutter panels, then regenerate the board layout so the shutter panels get their own separate layout.
- Set the cutting type and optimisation criteria for board layoutsChoose straight cuts or nesting, then tune recuts, optimisation criteria and stacking for the layout.
- Troubleshoot a stopped cutting job and read sticker codesCheck margins and saw width when a cutting job stops, and see how the sticker material code is built.
- Turn off half sheet mode from settingsSwitch back to full sheet and apply the change to turn off half sheet mode.
- Comprendre les dimensions des panneaux et l'épaisseur de lame dans les calculs de découpeDécouvrez comment les dimensions des panneaux tiennent compte par défaut d'un rognage de 10 mm sur les deux côtés et comment l'épaisseur de lame est saisie séparément pour le calcul de découpe.
- Bulk edit board size dimensions and quantitiesChange Length, Width, margins, Available Quantity and Force Use for several ticked board sizes at once, while Offcut flags stay per row.
- Check board sizes and optimization details in board layout viewConfirm board sizes and see the number of panels to cut, optimization percentage and sheets required, with board types separated by core, external and internal finish.
- Choisir un objectif d'optimisation de la liste de découpeChoisissez le moins de matière, le moins de temps de traitement ou l'option équilibrée, puis appliquez pour générer la disposition optimisée.
- Choose optimisation and open board layout optionsPick an optimisation type in the Optimization Statistics dialog, then use the board layout options and switch the cutting type to nesting when needed.
- Choose the optimisation criterion per sheet typePick a criterion for each sheet type, or apply one to all with the Overall row, then continue without recomputing.
- Choose the room and download scope for board layout filesOpen the board layout for one room and set the screen level that decides which panels a download covers.
- Clear an oversized panel violationClear an oversized panel violation either by splitting the panel to the available height or by entering the correct board dimensions in the board layout settings.
- Edit board layout to move panels between boardsMove a selected panel from one board to another in the board layout view.
- Enable minimum distance from edge for laminate border allowanceTurn on the minimum distance from edge setting so laminate border allowance is applied around the panel and set the maximum length of the smaller side in the same settings.
- Find grooving details when the board layout lacks themSee where panels' grooves, such as the back panel groove marked BP, are drawn while the board layout lacks grooving details.
- Fix grain-alignment violation by rotating finish 90 degrees at panel levelRotate the finish 90 degrees at panel level so the panel aligns itself to the vertical grain and the violation clears.
- Fix the "Reconfirm Board Layout cut type" warning when downloading nesting filesSee why the warning appears when a straight-cuts board layout is downloaded for nesting and choose how to proceed.
- Force Use makes nesting consume a specified board size firstForce Use on a board size tells the software to use that size first and only move to the next board size once it is used up.
- Comment l'épaisseur de lame est comptée séparément de la marge de coupeDécouvrez comment l'épaisseur de lame (trait de scie) est appliquée comme une tolérance distincte entre les coupes et comment la dimension restante est traitée.
- Inspect a composite sheet and keep the board remainderOpen a composite sheet to see its core material and combined pieces, and keep the unused board remainder for other projects.
- Read the Optimization Statistics modal after a comparison runRun the layout with Decide after Comparison and read each sheet type's sheet count, processing time and offcut figures.
- Réduire la limite de recoupe à 1 ou 2 pour les feuilles présentant des erreurs de dispositionCorrigez les feuilles dont les panneaux se chevauchent ou dépassent du panneau en abaissant la limite de recoupe pour ces feuilles uniquement.
- Réutiliser les chutes en les ajoutant comme panneauxAjoutez une planche de chute restante comme panneau ou code afin de pouvoir l'utiliser dans un projet ultérieur.
- Set board sizes, quantities and force useGive each board size its available sheet count and mark the sizes the optimizer must consume.
- Réglez la précision des dimensions sur 1 mm pour arrondir les dimensions de la liste de débitRéglez la précision des dimensions sur 1 mm pour que le système arrondisse les dimensions calculées au millimètre entier, conformément à la taille de panneau prévue.
- Set margins, blade thickness and saw widthSet the board margins and saw blade allowance so cutting jobs run with the right values.
- Set material thickness with laminate and 0.01 mm accuracyDefine the core material thickness, add the laminate thickness for the final board thickness, and set the required accuracy to 0.01 mm so the system adjusts the stored measurement.
- Show panel and label codes on the board layoutTurn on the Panel Code Annotations and Label Code Annotations switches so each panel's code and label code appear on the board layout.
- Changer de feuille lors du placement d'un panneau sélectionné dans Edit LayoutOuvrez le menu des feuilles du fil d'Ariane pour passer d'une feuille à l'autre d'un type de planche et placer le panneau que vous avez sélectionné sur la feuille de votre choix.
- Understand how board layout identifies partsLearn that board layout identifies parts by annotation codes such as C1 P10 rather than by panel names like left side, right side, drawer or bottom.
- Understand optimization after a material changeLearn what happens to optimization when core or finish materials are changed in a design.
- Understand panel separation and safety distance in board layoutLearn that board layout uses a fixed panel separation value, traditionally based on saw width.
- Understand the straight-cuts warning when downloading nesting filesLearn why the 'Reconfirm Board Layout cut type' warning appears when you download nesting files and what it is asking you to confirm.
- Understand why a single finish yields fewer sheetsSee why using one finish across panels lowers the total sheet count, since panels of the same finish can be combined on the same sheet.
- Understand why board count differs between viewsThe board count depends on the material combinations applied to each unit, so applying correct materials changes the reported board count.
- Understand why cut-list labels and board layouts show different sizesLearn why a cut-list label shows a size with decimals while the board layout shows rounded whole numbers.
- Use Nesting mode to position a sheet around a damaged cornerOpen a board type and sheet in the MES Board Layout and switch the Mode dropdown to Nesting to see the full cutting layout and place the sheet so a damaged corner falls on an area that gets cut away.
- View a board's layout with labelsClick an individual board to see its layout with labels.
Étiquettes et autocollants des panneaux35
- How panel labels and QR codes work in productionLearn what panel labels carry and how their QR codes drive CNC file lookup and order tracking.
- Output labels, pasting reports and assembly viewsPrint sheet and panel labels, pasting reports and exploded assembly views for the shop floor.
- Select the correct machine type when downloading panel labelsChoose the machine type that matches your CNC machine when downloading panel labels so the QR code starts the correct operations.
- Track work order progress by scanning panel label QR codesScan the QR code on a panel label to track a work order's progress through factory stations and mark completion at each scanned stage.
- Add separate QR codes for top and bottom programs on HOMAG CNC labelsGive a HOMAG CNC panel label separate QR codes for the top machining program and the bottom machining program.
- Les codes-barres sur les étiquettes de panneaux sont facultatifs et servent au suiviLes codes-barres sur les étiquettes de panneaux ne sont pas obligatoires et servent au suivi. Vous pouvez donc supprimer la zone du code-barres et réduire la taille de l'étiquette lorsque le suivi n'est pas nécessaire.
Tout afficher (35)
- How panel label defaults are setLearn the default panel label size and border the platform uses.
- Make panel labels visible in the design portalPublish the design so its panel labels for the cut list become visible, without opening the cut list.
- Read panel codes to identify carcass and unitPanel identifiers in production output make it easy to see which carcass a panel belongs to and which unit has to be cut, so a specific unit can be picked out quickly during cutting.
- Activer la rotation des étiquettes de panneaux pour une machineActivez le paramètre propre à la machine pour que sa sortie comporte des étiquettes de panneaux pivotées.
- Add edge band code, final size and material info to production labelsExtend production labels to show the edge band code, final panel size and internal and external material information.
- Choose which box label template a work order printsSet the default box label template for one work order so its labels print in the layout that client or project needs.
- Create a custom label template based on printer and sticker sizeCreate a custom label template, set your sticker size, choose the information fields to print, then update it and set it as default.
- Create, rename, update and default panel and box label templatesManage the org's panel and box label templates, from creating and customising them to setting the org-wide default.
- Télécharger les étiquettes de panneaux comme sortie de productionLes étiquettes de panneaux sont générées parmi les sorties de production téléchargeables.
- Enable loading order and premilling-by-side in sticker templateTurn on loading order and premilling by side in the sticker template so the sticker shows which side faces up and the premilling value per edge.
- Filter and report progress per operationCombine station and tracking-status filters and enable show detailed progress to see per-operation completion.
- Corriger un logo d'organisation manquant sur les étiquettes de boîteFaites apparaître le logo de l'organisation sur les aperçus d'étiquettes de boîte et les PDF imprimés en régénérant l'étiquette ou en vérifiant la configuration du logo et la couche du modèle.
- Corriger un libellé de panneau où le logo de l'organisation et le QR en double entrent en conflitDécouvrez pourquoi le logo de l'organisation et le QR en double du panneau ne peuvent pas s'imprimer tous les deux sur un libellé de panneau, et à quoi vous attendre concernant la mise en page du libellé et les exports.
- Corriger les numéros de boîte qui sautent après la suppression d'une boîteSupprimez une boîte pour renvoyer ses panneaux dans le pool non emballé, puis réattribuez les annotations afin que les boîtes restantes soient renommées séquentiellement.
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Fix user component annotation labels that cannot be changedUser component annotations are auto-labelled, so their labels cannot be edited.
- Générer et imprimer automatiquement les étiquettes des panneauxConfigurez une mise en page d'étiquette, choisissez les données de panneau à inclure, puis téléchargez et imprimez les étiquettes depuis les fonctionnalités de plan de panneaux.
- How panel stickers carry a CNC barcode alongside the scan QR codeLearn how the panel sticker can carry a barcode for the CNC machine in addition to the QR code used for scan tracking, and how a setting switches the machine-file field between a barcode and a QR code.
- Fonctionnement des étiquettes de feuilleDécouvrez comment chaque feuille reçoit sa propre étiquette dans l'ordre global des feuilles.
- Rendre les étiquettes de panneaux visibles après publication dans le portail de conceptionPubliez votre conception dans le portail de conception pour que les étiquettes de panneaux deviennent visibles.
- Read board layout labels in numerical L-number order per sheetClick any sheet in the board layout to see its labels numbered in numerical order with no missing L numbers.
- Read edge band thickness on the panel labelThe panel label prints the edge band thickness as a number on the side of the diagram where that banding applies, so shop-floor staff see it at a glance.
- Read the external and internal finish on a panel labelOpen the panel label to see which side of a panel carries the external finish and which carries the internal finish.
- Save label printing format files to drive for automatic retrievalLabel creation requires cut sizes, finish sizes, operations, edge banding thickness, and panel indicators.
- Scan panel labels to detect the correct CNC filePanel labels include a barcode that a CNC machine scans to detect the correct file for that panel.
- Show edgeband face grooving on panel labelsShow grooving information on panel labels in addition to the board layout view.
- Afficher le logo de l'organisation sur les étiquettes de carton et choisir sa positionActivez le logo de l'organisation sur un modèle d'étiquette de carton et choisissez son emplacement, en sachant quel logo est utilisé et comment il se comporte d'une page à l'autre.
- Understand offcut management in productionLearn that offcut management is not currently available in production and that labels are generated only for panels accounted for in a project.
- Update the sticker template after changing sticker settingsLearn how the sticker template controls which information appears on the sticker and can be switched on or off per field.
Opérations CNC et CAM65
- Ajouter des découpes sur un panneau et définir le type d'opération et l'outil pour la CNCCréez une niche sur la surface externe d'un panneau, définissez sa profondeur de coupe et son type d'opération, et rendez-la disponible pour la sortie CNC.
- Comprendre quand les rainures de panneau arrière apparaissent dans la sortie CAMDécouvrez comment les panneaux arrière encastrés génèrent des opérations de rainurage sur les panneaux environnants et quelles préférences et quels paramètres machine déterminent si ces rainures atteignent la sortie CAM/MES et de quelle manière.
- Ajouter une opération CAM en cochant include in CAM, en indiquant le type, la profondeur et l'outilEnvoyez une fonctionnalité de conception à la machine en cochant include in CAM, puis définissez son type de coupe, sa profondeur et l'outil préféré.
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- Cut a curved or arched panel from a final-size panelStart with a panel already at its final dimensions and cut the curve out of it to produce a curved or arched panel.
- Activer la compatibilité Biesse Works pour la sortie CIXActivez la compatibilité Biesse Works dans les paramètres de la machine afin que votre machine CNC Biesse lise correctement la sortie CIX générée.
Tout afficher (65)
- Trimming vs pocketing in CAM operationsLearn how trimming removes material across an entire area while pocketing carves a defined space inside a perimeter.
- Configurer le type de machine CNC et les données d'outils avant de télécharger la sortieDéfinissez le type de machine selon les faces percées, ajoutez les outils de routage et de sciage, puis enregistrez et téléchargez la sortie CNC.
- Force a tool and finish adding a CNC machineMap drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- Set routing line tool position L, R or C for cut alignmentClick a routing line to see the tool position with L, R and C options, specify a preferred tool, and check the panel preview by selecting the machine instead of raw view.
- Create custom cuts in edit panel design and include them in CAMDraw and offset a custom shape on a panel, define it as a cut with a depth, and enable the include in CAM option so the machining reaches the CNC files.
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Enable Include in CAM to push panel operations to productionTurn on Include in CAM when adding a panel operation so it reaches production, then choose the operation type, tool and tool number.
- Enter saw tool name, thickness and axis for back-panel groovingAdd a saw tool row in the CNC machine settings so back-panel grooving operations carry the right tool name, thickness and axis.
- Correspondance entre la sélection de l'outil préféré et les fraises de la machineDécouvrez comment l'outil préféré que vous choisissez pour une coupe en mode 2D CAM détermine la fraise de la machine qui l'exécute.
- Set back panel grooving methodChoose whether back panel grooves are cut by sawing or routing.
- Set the preferred router tool for back panel groovesSet the default router tool for the Back Panel Groove operation in a CNC machine's settings, choosing from tools identified by name, diameter and axis.
- Ajouter une machine CNC dans les paramètres pour télécharger les fichiers de perçageAjoutez une machine CNC dans Settings > Machine pour pouvoir télécharger les fichiers de perçage et les DXF.
- Add CNC tools that match the machineEnter every tool the job uses with names and numbers that match the machine so CNC output can be matched and downloaded.
- Check a tool's type in machine settingsLook up the type assigned to each tool in machine settings to see why a routing tool cannot be listed as a sawing tool.
- Configure CNC machine as 5-face process with panel flipEnter only the saw tool details, including the tool name and thickness, in the machine settings.
- Configurer le type de machine CNC selon le nombre de faces percéesDéfinissez le type de machine dans les paramètres de la machine CNC en fonction du nombre de faces que votre machine perce.
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- Créer des poches paramétriques et des découpes en os de chien sur les panneauxUsinez des poches sur les faces des panneaux, dimensionnez-les de façon paramétrique et utilisez le routage pour les découpes en os de chien et horizontales.
- Comment la tolérance de profondeur de rainure dans les paramètres CAM contrôle la précision des rainures de la liste de coupeDécouvrez comment la profondeur de rainure affichée dans la vue 2D/CAM d'un panneau inclut une tolérance ajoutée par le système et où la configurer.
- Include side panel cuts in CAM outputInclude the panel cuts on the sides of a cabinet in the CAM output.
- Machine radius panels and grooving by editing panel constructionEdit the panel design at the construction level and apply the required tools and operations so the application generates the machine instructions automatically.
- Output top and bottom drilling in one CNC fileTurn off the Separate Top Bottom Files setting on a CNC machine so it outputs a single file containing both top and bottom drilling.
- Restrict a panel area from grooving or drilling via clamping obstructionDefine a restricted rectangular area on a panel in the Clamping Obstructions table so the software rotates the panel when a groove or drilling operation falls inside it.
- Set up a CNC machine with its machine type and settingsUse the Add Machine option and fill in the machine type and the settings the setup stores per machine.
- Pourquoi les panneaux sortent tournés (ou non) dans les sorties CNCDécouvrez comment le réglage Always Rotate, la profondeur machine maximale et la valeur Min Panel Width déterminent si un panneau est tourné dans la sortie CNC, et que vérifier lorsque les perçages arrivent en miroir ou sur le mauvais chant.
- Ajouter et modifier un perçage en mode 2D Panel CAMAjoutez un perçage à un panneau en mode 2D Panel CAM et modifiez sa position, ses étapes et les réglages de profondeur machine.
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- Ajouter une ligne d'outil lame de scie dans la liste d'outils de scie latérale de la machineAjoutez une ligne d'outil lame de scie avec son nom et l'épaisseur de lame afin que les opérations de sciage puissent s'exécuter sur la machine.
- Back panel grooves cut end-to-end in generated MPR filesLearn how back-panel grooves defined end-to-end in the design carry through to the generated MPR file and match the drawings on the MES portal.
- Check CAM hole depth in panel 2D CAM modeOpen the panel in 2D view and enter CAM mode to verify hole markings such as drawer channel or tandem depths.
- Vérifier les avertissements de zone de serrage lors du téléchargement d'un dessinTéléchargez un dessin ou un fichier machine pour un ordre de fabrication et voyez quelles opérations se trouvent dans la zone de serrage restreinte.
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Choose a panel cutting strategy for CNC productionUse the panel-by-panel strategy for CNC cutting and avoid the single-step strategy when two panels are involved.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- Download and check CNC machine files before productionDownload the CNC output from the published work order, load it into the machine and verify it against the machine type.
- Download CNC machine output drawingsDownload drawings from the CNC machine output that show every panel with its machining details, using reference letters A, B, C and D to determine positions and depth.
- Draw the path before exiting to 3D view for the sweep toolDraw the sweep path before you exit to the 3D view, because the sweep cannot be applied without a defined path.
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Find the download buttons on a work order's CNC Machining tabLocate the Drawing and Machine Files buttons on each machine card and know which formats each machine offers.
- Corriger une rainure mal usinée en ajustant la tolérance de longueur de rainure CAMDéfinissez la tolérance de longueur de rainure dans les paramètres CAM d'administration à la moitié du diamètre de la fraise afin que les rainures soient correctes dans les fichiers de production.
- Fix missing routing or drill tools in CAM outputAdd the referenced tools and refresh the cache so regenerated CAM output includes every tool the job uses.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- Gérer l'avertissement « l'outil peut être différent » lors de la génération d'une sortie CNCDécouvrez pourquoi un avertissement "tool may be different" apparaît lors de la génération d'une sortie CNC et comment corriger la préférence de mappage des outils si le mauvais outil est sélectionné.
- Comment le G-code .nc d'Infurnia est limité : arcs R, pas de compensation d'outil, mm absolusDécouvrez les règles fixes du petit dialecte G-code d'Infurnia pour savoir ce que sa sortie .nc peut et ne peut pas exprimer sur votre contrôleur.
- How retract height is calculated from maximum safe ZLearn how the retract height written in the nesting file is derived from the maximum safe Z value and the board thickness.
- Comment la profondeur de la rainure pour bandeau lumineux est définie et vérifiéeDécouvrez comment la profondeur de rainure d'un SKU de bandeau lumineux détermine si un panneau est rainuré, à quelle profondeur, et comment vérifier le résultat dans la sortie CAM.
- Comment l'origine ORLST est choisie dans les fichiers Biesse CIXDécouvrez comment Infurnia choisit l'origine du lit ORLST pour chaque panneau, à partir de l'origine machine par défaut ou de la table d'origines par plage.
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- Faites correspondre la largeur de scie à la largeur de lame de la machineDéfinissez la largeur de scie sur l'ordre de fabrication selon la largeur de lame réelle de la machine de découpe et régénérez le fichier de scie pour que la disposition des panneaux soit correcte.
- Nommer les fichiers CNC selon la proximité des unités (C1, C2, C3)Utilisez des libellés de proximité d'unité tels que C1, C2 et C3 pour nommer les fichiers CNC dans les codes-barres, afin que le même concept de nommage reste cohérent d'un projet à l'autre.
- Remplacer la profondeur machine maximale par origine pour les panneaux Biesse surdimensionnésAttribuez à une ligne d'origine spécifique sa propre profondeur machine maximale plus grande, afin que les panneaux surdimensionnés ne soient acceptés qu'à cet endroit.
- Set onion-skin passes and through-cut ordering in nesting NC programsControl whether through-cuts are machined in one pass or two, and know that they always run last in the program.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- Essayez d'autres formats MPR lorsqu'une machine refuse le format par défautLorsqu'une machine ne lit pas correctement le MPR de la plateforme, essayez d'autres variantes MPR prises en charge et procurez-vous un fichier d'exemple fonctionnel auprès du fournisseur de la machine.
- Comprendre l'effet des modifications dans le mode Panel 2D CAM sur la sortie de fabricationDécouvrez ce que le mode Panel 2D CAM permet d'ajouter pour la fabrication et pourquoi ces modifications restent absentes de la conception 3D.
- Verify a nesting program with toolpaths and the NC simulatorOpen the nesting view on a single sheet to check raw or post-processed toolpaths, simulate the NC code and spot missing tools.
- Pourquoi les paramètres CAM bloquent l'enregistrement avec une erreur de champs obligatoiresDécouvrez comment la fenêtre des paramètres CAM valide vos saisies avant d'autoriser l'enregistrement.
- Pourquoi les valeurs Z du fichier .nc ne correspondent pas au Safe Z configuréVoyez comment le réglage Z Origin Reference et le dégagement de coupe traversante décalent les valeurs Z écrites dans votre fichier .nc, afin de distinguer un fichier correct d'une véritable erreur de profondeur.
Matériaux, quincaillerie et connecteurs49
- How connectors are assigned per scenarioLearn what a scenario is in connector setup and how it decides which connector is applied to a joint.
- Reduce a single panel's length using panel-level extensionShorten one specific panel by setting a negative extension on it at panel level in a construction style.
- Verify a completed design in QC modeOpen QC mode to see the materials, units and panels used in a completed design before verification.
- Add a connector to several units at onceAdd one connector to many units in a single pass by selecting the scenarios that need it in the Scenario view tab.
- Find and replace a material or edge band in QC ModeTrace which units and panels use a SKU and swap it for another across the design.
- Apply full or half overlay to selected scenarios before adding a connectorApply full or half overlay edits across all current scenarios in the design before adding a connector.
Tout afficher (49)
- Change edge bands in bulk from the production sectionChange the edge band on a line item in the production section and the change applies to every instance of that line item at once.
- Create a new construction style and add all reductionsCreate a new construction style or reuse an existing one, then add all the required reductions including the bottom reduction.
- Inspect units and panels in the QC Mode tabsRead the Units and Panels tabs to see annotations, rooms and where each material came from.
- Read a design's Raw Material Lists and Cabinet Composite BOQLearn what each Raw Material Lists tab and the Cabinet Composite BOQ show, and how to compare lists by item name rather than Sno.
- Read a panel's machining and edge-band drawing in 2D Panel CAM ModeOpen a panel's 2D Panel CAM Mode to see its hinge cups, drill and contour legends, edge-band labels and view options.
- Use X-ray mode to verify drilling before publishingSwitch the production view to X-ray mode to check drilling details on a single component or the whole cabinet, then click X-ray again to return to the solid view.
- Automate connector counts with rulesTell the software how to handle connectors for a given connection so connectors are added by rule.
- Change drawer bottom and carcass panel material at panel levelChange the core material of a drawer bottom panel or other drawer carcass panels by editing the material at the individual panel level in the production portal.
- Correct wrong materials and push the change to productionFix excess or wrong material types in the design and re-sync the work order so production picks it up.
- Inspect assemblies with exploded view, X-ray mode and panel hidingShow an exploded view with an adjustable explode percentage, toggle X-ray mode to see through parts, and turn off individual panels to inspect internal structure.
- Manage connectors on ticked scenarios from the Actions menuPick a connector and apply it to the ticked scenarios, and use a connector card's three-dot menu for Publish, Filter for this, Replace and Remove.
- Replace a connector in the connector card in manufacturing settingsUpdate the connector in the connector card within manufacturing settings so production output uses the changed hardware connector, then confirm it appears correctly in the design.
- Remplacer les connecteurs à l'aide des règles de remplacement et de sélectionRemplacez un type de connecteur par un autre et vérifiez combien de connecteurs ont été remplacés.
- Replace unwanted hardware in manufacturing settingsConfigure the correct replacement hardware so the unwanted item no longer appears in the output.
- Review board layout settings on the MES portalReview board layout settings on the MES portal.
- Tell how many of each item is requiredUse the material and hardware summary to see how many of each item a design requires.
- Désactiver la plinthe arrière dans les paramètres de construction de l'armoireDésactivez la plinthe arrière dans les paramètres de construction de l'armoire pour qu'elle n'apparaisse plus dans la liste de débit.
- Understand the sliding wardrobe shutter system propertyLearn what the shutter system property controls in a sliding wardrobe.
- Verify connector placement and run a collision checkCheck that connectors are placed correctly and run a collision check.
- Visualise cabinet assembly with exploded viewsCreate exploded views to see how a cabinet goes together, then refresh admin settings to update columns and generate the CNC zip for machine upload.
- Visualise multi-finish shutters in the designSee how multi-finish on shutters can be visualised in the design.
- Add a finish condition to a panel glue manufacturing ruleAdd a finish condition to a panel glue manufacturing rule by setting the condition type to finish and choosing the tag operator 'equal to'.
- Add hardware to a box and handle closed-box warningsSelect hardware with an unpacked remainder, enter a valid quantity, and reopen a closed box if the warning appears.
- Add stability rails to wardrobes wider than 900 mmAdd stability rails as an option when a wardrobe is wider than 900 mm.
- Change material for specific panels using filter parametersFilter the panels in the finished materials view so a material change applies only to the units that match your criteria.
- Check and bulk-change core material by filteringFilter the materials view by core material to spot a wrong ply and swap it in bulk.
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Check where a panel's hardware came fromRead the connector source in the connector scenario view to tell whether a panel's hardware was inserted by a hardware rule or placed by hand.
- Define connector height ranges with an infinity upper boundDefine multiple bands for a connector's height range, including a final band with an infinity upper bound.
- Define custom LED strip sizes in the admin portalDefine any custom LED strip sizes in the admin portal so they are available for LED grooves in CNC output.
- How cabinet and panel annotations identify modules and panelsLearn how unique cabinet and panel annotations identify modules and the panels inside them for board layout.
- Machine files do not output two separate groups for split shuttersWhen a shutter is split into two parts using a divisional shutter, the design and 3D view show two separate panels.
- Reproduce rejected panels using rejection recordsUse the rejection record kept for a rejected panel to reproduce it when remanufacturing.
- Restaurer le matériel supprimé via les connecteurs et scénarios de productionOuvrez le design dans production design, accédez à 3D puis à connectors and scenarios, et réattribuez des matériaux tels que le verre simple depuis le catalogue pour restaurer le matériel supprimé.
- Set dummy panel depth to 0 mm to fix Gola cut on blind unitsSet the dummy panel depth to 0 mm so the Gola cut and shelf reveal on a blind unit come out right.
- Track edge banding, core material and finish in panel schedulesCreate and download panel schedules as CSV to track edge banding, core materials and finishes and spot panels with discrepancies.
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand the Modular Units Hardware tabSee what the Hardware tab lists for each cabinet, how rows are grouped, and how to check panel drilling details.
- Understand the two hardware lists for procurement and assemblyLearn how the procurement hardware list and the assembly hardware list differ and which one the assembly team should use.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- Verify a cabinet before sending it to productionCheck a cabinet's SKU structure against the rules before you send it to production.
- Work out strip light drivers and screws manuallyPlace strip lights manually in the drawing so the running length is known, then work out the correct driver rating and screw quantities separately.
- Work with connectors and scenarios in single unit CAM modeOpen a cabinet's CAM menu in the production design to reach Single unit CAM Mode (Panel by Panel), Connectors and Scenarios, then manage each scenario of the selected panel.
Suivi des panneaux et postes37
- Open QC Mode and understand its tabs and work scopeEnter QC Mode, see which work scope it opens on, and learn what each of the four tabs shows.
- Track scanned panel progress in a work orderSee the progress of any scanned panel inside a work order, with green ticks for panels scanned at a station and panel-by-panel status within a project.
- Grant MES roles per user and load mapped stationsTurn on MES roles for individual users without admin rights and reload so mapped station data appears.
- Reject and remake a panel from the manual tableReject a panel and remake it, then regenerate the remake's outputs from the Rejections tab.
- Set up stations and operators for panel trackingStart tracking with one person at a chosen station and add stations and operators as work progresses.
- Understand exempt panels at edgebanding and CNC stationsLearn why some panels are not trackable at edgebanding and CNC stations and where they appear.
Tout afficher (37)
- Understand Shipment page tabs and station permissionsLearn how the Shipment page's Loading and Unloading tabs depend on the stations mapped to you and what each view requires before you scan boxes.
- Add missing stations and print panel labelsReview the default stations for a new account, add any missing station from station settings, and print panel labels.
- Check per-panel station status on Order ProgressOpen the Order Progress tab to see each panel turn green as it passes each station.
- Create a custom-named station on a standard typeAdd a station by naming it and choosing one of the existing station types.
- Create MES users and stations with the right roles and typesSet up MES admins, MES operators and stations so tracking access can be assigned correctly.
- Deactivate tracking stations a factory does not scan atDeactivate any tracking station your factory does not want to scan at, and station types with no active station are left out of progress calculations.
- Filter tracking data by station status and download the listNarrow production tracking to panels by station status, then download the filtered list.
- Corriger une station créée avec un type de station erronéLe type d'une station étant fixé à sa création et non modifiable, créez une station de remplacement au bon type, transférez ses opérateurs et désactivez l'ancienne station.
- Get an alert when a panel has already been scannedScan panels on the mobile app and the system alerts you when the same panel has already been scanned.
- Handle rejected panels: retired codes, remakes and undoLearn how a rejected panel's code is retired, how the panel is remade with a fresh code, and when a rejection can still be undone.
- Comment le nombre de panneaux non démarrés est calculéDécouvrez quels panneaux le nombre de non démarrés inclut dans le suivi de production et quand il change.
- Comment le portail de production prend en charge le contrôle qualité sur l'atelierDécouvrez comment le portail de production présente les contrôles qualité et les sorties prêtes pour la machine sans modifier la conception d'origine.
- How tracking records and statuses are storedLearn what each scan records, which tracking sources exist, and what item status shows.
- Map users to tracking stations and fix missing usersGive each MES user access to the stations they work at and understand why a user may not appear in the Operators list.
- Pick the station and scan panel labels on the phoneChoose the station on the phone before scanning, and only scan the panel's own label so the code is accepted.
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- Read tracked-panel counts per stationSee why counts differ between Panel Cutting, Edgebanding and CNC, and what a lower count at a later station means.
- Route projects to a factory or vendorConfigure machines per factory or vendor and route a project to the chosen one.
- Scan a panel QR to track it at a stationPoint the scanner at a valid panel label to mark the panel tracked at the currently selected station.
- Scan panels with a Bluetooth scanner or camera modeUse a slow-typing Bluetooth scanner or switch to camera mode, which shows each scan result as a self-clearing sheet on touch devices.
- Scan panels with a camera or hardware scannerUse the camera-based tracker at each station and know that every scan records its source.
- Définir l'accès par utilisateur dans le portail d'administration et le portail MESAttribuez à chaque utilisateur le bon niveau d'accès et le bon rôle MES en définissant ses autorisations dans le portail d'administration et dans le portail MES.
- Set up an MES operator for tracking station scanningCreate the MES operator as a user in the admin portal with their email ID and map them to a tracking station before scanning can be used.
- Set up factory-floor tracking from workflow to first scanPlan your stations, create operators, assign them to stations and start scanning on Android devices.
- Désactiver un poste de suivi au lieu de le supprimerDésactivez un poste de suivi dans Settings > Configure stations pour qu'il disparaisse du sélecteur de poste de l'opérateur, tandis que ses panneaux suivis conservent leur historique.
- Track panels manually from the Manual tableOpen the Manual table, pick a published work order and track the panels you need at the station.
- Track panels with a phone camera or the Manual viewUse a phone camera or pick panels in the Manual view when no hardware scanner is at hand.
- Understand station-scan gating and scan orderLearn that gating is all-or-nothing and that scanning out of sequence is not blocked.
- Understand the nine station types and how panels are trackedLearn which station types are scan stages, which are box-based, and how default and extra stations behave as one stage.
- Understand where scan summaries are shownLearn that the platform shows a browser summary of which panel was scanned at which station and at what time.
- Pourquoi un scan QR est ignoré et affiche un toast 'Scan ignored'Découvrez pourquoi l'application affiche un toast 'Scan ignored — <reason>' au lieu d'accepter un scan, et ce que signifie chaque raison sur les pages Tracking et Shipment.
Emballage et expédition24
- Create a box manually on the Packaging pageCreate a box manually on the Packaging page so the factory floor gets a packaging list to pack panels and box labels can be printed before packing.
- Créer un carton, imprimer son étiquette et le fermer pour l'emballageEmballez les panneaux découpés en créant un carton dans l'interface de production, en ajoutant des panneaux, puis en imprimant l'étiquette et en fermant le carton.
- How the Shipment/Order Status counts are derivedLearn how boxes, panels and hardware each count towards shipment progress on the Order Status page.
- Consulter les compteurs d'emballage et télécharger les étiquettes de carton et les listesSuivez les panneaux emballés et la quincaillerie dans l'en-tête de la page Packaging, puis téléchargez Box Labels, la Packaging List et Unpacked Panels au format PDF.
- Read the Shipment Loading view and open the Shipment SummarySee the selected shipment's status, loaded and pending boxes, and the actions available, then open its full Shipment Summary.
- Add panels to a box and print its label on the MES Packaging pageTick panels in the Manual panel selector, confirm adding them to a box, and print the box label to close it.
Tout afficher (24)
- Add panels to a box with the Manual panel selectorFall back to the Manual panel selector to filter panels by core, finishes, edge bands and operations and place them without scanning.
- Créer un carton d'emballage à partir du bouton situé à droite de l'écranCréez un nouveau carton pour un ordre de fabrication sur la page Packaging, puis imprimez son étiquette et fermez-le pour terminer l'emballage.
- Create a shipment for a work orderOpen the Shipment section for the work order, create the shipment with driver, vehicle, dispatch and receiver details, then scan box labels to mark them loaded.
- Créez des cartons, scannez les étiquettes et saisissez les détails d'expédition pour l'envoiCréez de nouveaux cartons pour l'emballage, assurez le suivi de tous les panneaux, puis scannez l'étiquette du carton et saisissez les coordonnées du destinataire, du chauffeur et du véhicule nécessaires à l'envoi.
- Enable the packaging page and map operators to a Packaging stationPublish the work order and map each operator to a tracking station of type Packaging so the page is active.
- Fix packaging scans that are ignoredOpen a box and clear the invalid-QR popup so the packaging scan listener accepts your scans.
- Fix "Panel is already in Box" errors and move panels between boxesLearn why a panel can sit in only one box, what the error means, and how to move a panel to a different box.
- Handle invalid codes and duplicate or closed-box scansRead the reason for an invalid code, pick the panel manually, and confirm before adding to a closed box.
- Load and unload boxes on the Shipment pageScan box QR codes to load and unload boxes, use the tabs and unload list, and revert actions without losing track of records.
- Charger les cartons pour l'expédition en scannant les étiquettes des cartonsConnectez-vous sur votre téléphone mobile et scannez les étiquettes des cartons pour charger les articles à livrer, en vérifiant quels cartons restent à charger et ce que contient chaque carton.
- Imprimer une étiquette de carton et fermer le carton, ou corriger une étiquette qui ne s'est pas impriméeImprimez une étiquette de carton depuis Packaging ou fermez le carton sans étiquette, et découvrez pourquoi une étiquette est manquante ou obsolète.
- Print labels and close boxes for the project stepDownload the labels and packaging listings, then print each box label and close the box until all boxes are done.
- Print or save the Shipment Summary for the driverOpen the Shipment Summary from the Shipment page and print it directly or save it as a PDF to send to the driver.
- Scanner les cartons et consulter le récapitulatif de l'expédition dans l'application mobileScannez un carton pour vérifier s'il est chargé, puis ouvrez le récapitulatif de l'expédition dans l'application mobile.
- Track packaging and shipment in order progressUse order progress to track packaging and shipment so you can trace components missing during shipment.
- Suivre l'état d'emballage avec une liste de colisage de projetCréez une liste de colisage pour chaque projet afin que le système indique les articles encore non emballés.
- Track unpacked hardware while packing boxesUse the unpacked items list and remove hardware to return its quantity to the unpacked pool.
- Undo tracking and acknowledge a Panel Not Required alertUndo a tracking in one click from the success message or acknowledge the Panel Not Required alert.