CNC 和 CAM 操作
指南:96
- 为 CNC 添加板件开孔并指定加工类型和刀具在板件的外表面上创建凹槽,设置其切割深度和加工类型,并使其可用于 CNC 输出。
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- 将 CNC 文件下载为 zip 压缩包,并上传到机器下载 CNC 文件,解压 zip 压缩包,并将解压后的文件上传到 CNC 机器。
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- 强制指定刀具并完成添加 CNC 机器通过 tool_names 映射钻孔刀具和轮廓刀具,然后选择 CNC 和 Generic MPR,并设置刀具方向和机器名称。
- 为工单输出 CNC 文件在生产设置中添加机器,选择 CNC 逐板件操作,然后下载通用 MPR file。
- 下载板件标签时选择正确的机器类型下载板件标签时,请选择与您的 CNC 机器相匹配的机器类型,以便 QR code 启动正确的操作。
- Trimming vs pocketing in CAM operationsLearn how trimming removes material across an entire area while pocketing carves a defined space inside a perimeter.
- 通过在 CAM 中标记包含、类型、深度和刀具来添加 CAM 操作在 CAM 中标记包含,将设计特征发送到机器,然后设置其切割类型、深度和首选刀具。
- 在 MES 机器设置中添加机器选择机器的类型、类别和输出格式,然后输入机器名称和设置,即可添加机器。
- 首选刀具选择如何映射到机器钻头了解在 2D CAM 模式下为切割选择的首选刀具如何决定由哪个机器钻头执行该切割。
- 为多个单元添加连接件并修复重复的钻孔错误一次为多个场景添加连接件,或手动设置一个连接件,并将重复的钻孔错误追溯到单元类型的制造详情。
- 下载 CNC 机器输出图纸从 CNC 机器输出中下载图纸,图纸显示每块板件及其加工细节,并使用参考字母 A、B、C 和 D 来确定位置和深度。
- 下载包含带括号尺寸的单个 CNC 加工 PDF使用 CNC 加工下载选项,为所需板件生成 CNC 加工 PDF。
- 在生产前下载并检查 CNC 机器文件从已发布的工作订单中下载 CNC 输出文件,将其载入机器,并对照机器类型进行核对。
- 启用Include in CAM,将板件工序推送到生产添加板件工序时开启Include in CAM,该工序才会进入生产,然后选择工序类型、刀具和刀号。
- 通过编辑板件构造来加工圆弧板件和开槽在构造层级编辑板件设计,并应用所需的工具和操作,应用便会自动生成机器指令。
- 在面板图纸 PDF 上读取钻孔位置、图例和线型了解手动面板图纸 PDF 如何标记每个钻孔的位置、尺寸和类型,以便您能在车间现场读取。
- 通过调整隔板宽度或解决碰撞来处理钻孔碰撞在单件 CAM 模式下检查钻孔和钻孔碰撞面板违规,然后对较大的问题使用 solve collisions。
- 添加与机器匹配的 CNC 刀具输入作业使用的每把刀具,其名称和编号须与机器匹配,以便 CNC 输出能够匹配并下载。
- 在设置中添加 CNC 机器以下载钻孔文件在 Settings > Machine 中添加 CNC 机器,以便下载钻孔文件和 DXF。
- 在 2D Panel CAM Mode 中添加和编辑钻头在 2D Panel CAM Mode 中向面板添加钻头,并编辑其位置、步数和机器深度设置。
- 在机器设置中检查工具的类型在机器设置中查看分配给每个工具的类型,以了解为什么铣削工具不能列为锯切工具。
- 将 CNC 机器配置为带板材翻面的五面加工工艺在机器设置中仅输入锯具详细信息,包括工具名称和厚度。
- 下载输出前,先配置 CNC 机床类型和刀具数据按钻孔面设置机床类型,添加铣削刀具和锯切刀具,然后保存并下载 CNC 输出。
- 按钻孔面数配置 CNC 机床类型在 CNC 机床设置中设置机床类型,使其与机床钻孔的面数一致。
- 下载 CNC 设备的机器文件通过 CNC 设备的 Machine Files 下载选项下载该设备的机器文件,并使用其旁边的菜单进行 DXF 输出。
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- 查找钻孔边界冲突中指定的板件阅读冲突消息,通过标签和唯一代码确定受影响的板件,然后从该板件的 CAM 下拉菜单中以 2D CAM 模式打开该板件。
- 钻孔信息和开料清单如何从五金件生成了解您在设计中所定义的五金件如何生成钻孔信息和开料清单。
- 按单元邻近性命名 CNC 文件(C1、C2、C3)在条码中命名 CNC 文件时,请使用 C1、C2 和 C3 等单元邻近性标签,以便同一命名概念在各项目中保持一致。
- 了解嵌入式背板如何生成开槽工序了解背板嵌入时哪些板件会开槽,以及这些槽在 CAM/MES 输出中显示在哪里。
- 设置 CNC 设备及其设备类型和设置使用 Add Machine 选项,填写设备类型以及该设置按设备存储的各项设置。
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- 发布后添加机器并刷新机器列表在Settings > Machines中添加梁锯或CNC机器,使其无需重新发布即可显示在已发布的生产工单上。
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- 在机器侧锯刀具列表中添加锯片刀具行添加一行锯片刀具,填写其名称和锯片厚度,以便在机器上运行锯切操作。
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- 导出前确认机器接受的格式在导出切割清单和生产数据之前,请检查机器支持的格式;当 DXF 仅包含几何信息时,请规划 CSV 工作流程。
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- 从Custom Cutlist下载特定机器的开料清单从Custom Cutlist菜单中选择一台裁板锯机器,下载按该机器格式生成的开料清单。
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Filter and break down progress by operationCombine station and tracking-status filters and enable show detailed progress to see completion per operation.
- 在工作订单的CNC Machining标签页上找到下载按钮在每张机器卡片上找到 Drawing 和 Machine Files 按钮,并了解每台机器提供哪些格式。
- 修复 CAM 输出中缺失的铣削或钻孔刀具添加所引用的刀具并刷新缓存,使重新生成的 CAM 输出包含该作业使用的所有刀具。
- 机器设置配置的工作方式了解如何一次性配置机器设置,并在所有后续作业中重复使用。
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- 使锯切宽度与机器锯片宽度一致将工单上的锯切宽度设置为切割机的实际锯片宽度,并重新生成锯切文件,以确保板材排版正确。
- 为超大 Biesse 板材按原点覆盖最大机器深度为特定原点行设置更深的独立最大机器深度,使超大板材仅在该原点被接受。
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- 从 Admin 拉取最新的工具和 CNC 设置通过 Settings 将 Admin portal 中的工具和 CNC 设置刷新到当前工单。
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- Set machine grooving preferences for back-panel groovesChoose the operation type and preferred tools that decide how each machine cuts back-panel grooves.
- 设置带 CSV 输出和所选列的裁板锯机器配置裁板锯机器,以输出包含所需列的 CSV 切割清单,从 part code 开始。
- 当机器拒绝默认格式时,尝试其他 MPR 格式当机器无法正确读取平台的 MPR 时,请尝试其他受支持的 MPR 变体,并向机器供应商获取一个已知可用的示例文件。
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- 输出切割排版、切割清单和 CNC 文件获取适用于您的锯和机器的板材排版、切割清单和 CNC 文件。
- Find grooves in the board layout and CNC fileConfirm a back-panel groove by checking the carcass panel's board layout and the CNC file.
- Infurnia CSV 切割清单如何用于 NC 和梁锯机器了解 Infurnia 为 NC 或梁锯机器提供的 CSV 文件包含哪些内容,以及哪些内容交由机器处理。
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- 在一个 CNC 文件中输出顶部和底部钻孔关闭 CNC 机器上的 Separate Top Bottom Files 设置,使其输出一个同时包含顶部和底部钻孔的文件。
- Scan panel labels 检测正确的 CNC 文件板件标签包含条形码,CNC 机器扫描该条形码即可检测该板件对应的正确文件。
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- Biesse 开料机文件中 Material.csv 和 Sheet.csv 的生成方式了解 Biesse (CIX) 开料机 zip 中的 Material.csv 和 Sheet.csv 主文件包含哪些内容,以及它们的行和板材尺寸是如何生成的。
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- 使切割清单导出格式与您的锯机匹配请选择已知可与您的锯机品牌配合使用的切割清单文件格式,以确保导入的面板保持正确尺寸。
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- 为某台机器开启面板标签旋转启用该机器的单独设置,使该机器的输出带有旋转后的面板标签。
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
更多指南 19
显示全部(19)
- 从MES portal下载用于电子开料锯的锯切文件在MES portal中从工单获取 BSA 电子开料锯设备的 XML 锯切文件。
- 在编辑面板设计中创建自定义切割,并将其包含在 CAM 中在面板上绘制并偏移自定义形状,将其定义为带深度的切割,并启用 include in CAM 选项,使加工信息写入 CNC 文件。
- 输入锯切刀具名称、厚度和轴,用于背板开槽在 CNC 机器设置中添加一行锯切刀具,使背板开槽操作带有正确的刀具名称、厚度和轴。
- 设置铣削线刀具位置 L、R 或 C,以实现切割对齐点击一条铣削线,查看带 L、R 和 C 选项的刀具位置,指定首选刀具,并选择机器而非原始视图来检查板件预览。
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Create parametric pockets and dog-bone cutouts on panelsMachine pockets into panel faces, size them parametrically, and use routing for dog-bone and horizontal cutouts.
- 在2D Panel CAM模式中查看板件的加工图和封边图打开板件的Enter 2D Panel CAM Mode,即可查看其铰链杯、Drill Legend、轮廓图例和封边标签,与机器实际切割时一致。
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- 生产门户如何在车间支持质量控制了解生产门户如何呈现质量控制检查项和可直接用于机器的输出,同时不改变原始设计。
- 在生产中于 2D 板件 CAM 模式下打开板件当板件图纸无法明确饰面或钻孔属于哪一面时,在生产中于 2D 板件 CAM 模式下打开该板件。
- 通过夹持障碍区域限制板件区域开槽或钻孔在 Clamping Obstructions 表中为板件定义一个受限矩形区域,当开槽或钻孔操作落入该区域时,软件会旋转板件。
- 设置背板开槽的首选铣刀刀具在 CNC 机床的设置中,为 Back Panel Groove 操作设置默认铣刀刀具,可从按名称、直径和轴标识的刀具中选择。
- 用分解视图直观查看柜体装配创建分解视图,查看柜体如何组装,然后刷新管理设置以更新列并生成 CNC 压缩包,用于上传到机器。
- 下载图纸时检查夹持区域警告为工单下载图纸或机器文件,查看哪些工序位于受限夹持区域内。
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- Biesse CIX 文件中 ORLST 原点的选择方式了解 Infurnia 如何为每块板材选择 ORLST 床原点:来自 Default Machine Origin 或基于范围的原点表。
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- 为什么 .nc 文件中的 Z 值与配置的安全 Z 不一致了解哪些 NC 机器设置字段实际控制写入 .nc 文件的 Z 值。