CNC and CAM operations
Guides: 96
- Add panel cutouts and assign operation type and tool for CNCCreate a niche on a panel's external surface, set its cut depth and operation type, and make it available for CNC output.
- Add grooves or moulding to a panel and set the CAM operationAdd groove or moulding shapes on the external side of a shutter and send their operations to the CNC.
- Download CNC file as a zip and upload it to the machineDownload the CNC file, extract the zip and upload the extracted file to the CNC machine.
- Read the machine list and handle unsupported output formatsRead the machine list columns and, when a format is missing, test with a CSV cutlist or confirm the format with the vendor.
- Force a tool and finish adding a CNC machineMap drill and contour tools via tool_names, then choose CNC and Generic MPR and set the tool direction and machine name.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- Select the correct machine type when downloading panel labelsChoose the machine type that matches your CNC machine when downloading panel labels so the QR code starts the correct operations.
- Trimming vs pocketing in CAM operationsLearn how trimming removes material across an entire area while pocketing carves a defined space inside a perimeter.
- Add a CAM operation by marking include in CAM, type, depth and toolSend a design feature to the machine by marking it include in CAM, then set its cut type, depth and preferred tool.
- Add a machine in MES machine settingsAdd a machine by choosing its type, category and output format, then enter its name and settings.
- How preferred tool selection maps to machine bitsLearn how the preferred tool you pick for a cut in 2D CAM mode decides which machine bit performs it.
- Add connectors to several units and fix repeated drill errorsAdd a connector to many scenarios at once or set one manually, and trace repeated drill errors back to the unit type's manufacturing details.
- Download CNC machine output drawingsDownload drawings from the CNC machine output that show every panel with its machining details, using reference letters A, B, C and D to determine positions and depth.
- Download a single CNC machining PDF with bracketed dimensionsGenerate a CNC machining PDF for the required panels using the CNC machining download option.
- Download and check CNC machine files before productionDownload the CNC output from the published work order, load it into the machine and verify it against the machine type.
- Enable Include in CAM to push panel operations to productionTurn on Include in CAM when adding a panel operation so it reaches production, then choose the operation type, tool and tool number.
- Machine radius panels and grooving by editing panel constructionEdit the panel design at the construction level and apply the required tools and operations so the application generates the machine instructions automatically.
- Read drill positions, legend and line styles on a panel drawing PDFLearn how the manual panel drawing PDF marks each drill's position, size and type so you can read it on the shop floor.
- Resolve drill collisions by shifting partition width or solving collisionsCheck drill and drill collision panel violations in single unit CAM mode, then use solve collisions for larger issues.
- Add CNC tools that match the machineEnter every tool the job uses with names and numbers that match the machine so CNC output can be matched and downloaded.
- Add a CNC machine in settings to download drilling filesAdd a CNC machine in Settings > Machine so you can download drilling files and DXFs.
- Add and edit a drill in 2D Panel CAM ModeAdd a drill to a panel in 2D Panel CAM Mode and edit its position, steps and machine depth settings.
- Check a tool's type in machine settingsLook up the type assigned to each tool in machine settings to see why a routing tool cannot be listed as a sawing tool.
- Configure CNC machine as 5-face process with panel flipEnter only the saw tool details, including the tool name and thickness, in the machine settings.
- Configure CNC machine type and tool data before downloading outputSet the machine type by drilling faces, add the routing and saw tools, then save and download the CNC output.
- Configure CNC machine type by number of drilling facesSet the machine type in the CNC machine settings to match how many faces your machine drills.
- Download machine files for a CNC machineDownload the machine files for a CNC machine from its Machine Files download option, and use the menu beside it for DXF output.
- Drill into board types and sheets to spot odd panel groupingsOpen a board type and then a single sheet to see exactly which panels sit on it and how big they are.
- Find the panel named in a drill boundary violationRead the violation message to identify the affected panel by its label and unique code, then open that panel in 2D CAM mode from its CAM dropdown.
- How drill information and the cut list come from hardwareLearn how the hardware you define in the design produces drill information and the cut list.
- Name CNC files by unit proximity (C1, C2, C3)Use unit proximity labels such as C1, C2 and C3 when naming CNC files in barcodes so the same naming concept stays consistent across projects.
- See how inset back panels create groove operationsFind out which panels receive a groove when the back panel is inset and where those grooves show up in CAM/MES output.
- Set up a CNC machine with its machine type and settingsUse the Add Machine option and fill in the machine type and the settings the setup stores per machine.
- Add a panel-saw machine to the Custom Cutlist menuRecognise when no panel-saw machine is configured and add one with the right role.
- Add machines after publishing and refresh the machine listAdd a beam-saw or CNC machine in Settings > Machines and make it appear on the published work order without republishing.
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- Add saw blade tool row in machine side-saw tool listAdd a saw blade tool row with its name and blade thickness so sawing operations can run on the machine.
- Check for clashing drill holes before productionRun collision detection in the design tool so clashing drill holes are caught before the design goes to production.
- Choose the machine and edit its tool parametersPick the machine in the download step to get its post-processor output, and edit a nesting machine's tool parameters in its settings dialog.
- Configure a CNC nesting machine with tool lists and NC codesCreate a CNC nesting machine with type CNC / Manual Operations, sub type Nesting and output NC.
- Confirm the format a machine accepts before exportingCheck the machine's supported format before exporting cut list and production data, and plan a CSV workflow when DXF carries geometry only.
- Create a custom cut list machine format under SettingsSave a machine under Settings so it appears as a custom cut list option.
- Download a machine-specific cutlist from Custom CutlistPick a panel-saw machine from the Custom Cutlist menu to download the cutlist formatted for that machine.
- Enter saw tool name and thickness in machine settingsEnter the saw tool name and thickness into the machine settings portal and save the settings to complete the CNC configuration.
- Filter and break down progress by operationCombine station and tracking-status filters and enable show detailed progress to see completion per operation.
- Find the download buttons on a work order's CNC Machining tabLocate the Drawing and Machine Files buttons on each machine card and know which formats each machine offers.
- Fix missing routing or drill tools in CAM outputAdd the referenced tools and refresh the cache so regenerated CAM output includes every tool the job uses.
- How machine setup configuration worksLearn how machine setup is configured once and reused for all future jobs.
- Import AutoCAD files for complex CNC panel designsBring a complex carved panel design into Infurnia by importing an AutoCAD file inside the edit panel design feature.
- Match saw width to the machine blade widthSet the saw width on the work order to the cutting machine's real blade width and regenerate the saw file so the board layout is correct.
- Override Maximum Machine Depth per origin for oversized Biesse panelsGive a specific origin row its own deeper Maximum Machine Depth so oversized panels are accepted only there.
- Pre-mark panels that need no operation in the operations columnScan the panels that genuinely require the operation by QR code after pre-marking the rest in the machine operations column.
- Pull latest Tool and CNC settings from AdminRefresh Tool and CNC settings from the Admin portal into the current work order via Settings.
- Resolve drill outside panel CNC violations using violation detailsOpen the violation details for a CNC violation such as drill outside panel, which are listed with codes, to resolve it.
- Select manual machine type for multi-boring CNC machines in label templateChoose the Manual machine type for a multi-boring machine and set it in the cut list settings.
- Set Y-axis maximum and map tools before running CNC fileConfirm tool mapping so the CNC file is ready to run.
- Set machine grooving preferences for back-panel groovesChoose the operation type and preferred tools that decide how each machine cuts back-panel grooves.
- Set up a panel saw machine with CSV output and chosen columnsConfigure a cutting panel saw machine to output a CSV cut list with the columns you need, starting with part code.
- Try alternate MPR formats when a machine rejects the defaultWhen a machine cannot read the platform's MPR correctly, try other supported MPR variants and get a known-working example file from the machine vendor.
- Understand connector counts and drills in Scenario viewLearn why the Connectors column counts connector cards on a scenario and how each card's quantity and offsets set the number of drills.
- Understand how the file format is fixed per machine recordLearn why the format is fixed per machine record and how to pick a starting output when the exact model is unknown.
- Use Single Unit CAM Mode with X-ray to verify drillsOpen Single Unit CAM Mode with the shortcut "su enter" and combine it with X-ray to check drill positions and connector details on the 2D panel drawing.
- Output cutting layouts, cutlists and CNC filesGet board layouts, cutlists and CNC files for your saws and machines.
- Find grooves in the board layout and CNC fileConfirm a back-panel groove by checking the carcass panel's board layout and the CNC file.
- How Infurnia CSV cut lists work for NC and beam saw machinesLearn what the Infurnia CSV file for NC or beam saw machines contains and what it leaves to the machine.
- Download CSV, PDF board layout, panel labels and CNC file from productionDownload the manufacturing output files you need once the cut list is verified and the work order is published.
- Output top and bottom drilling in one CNC fileTurn off the Separate Top Bottom Files setting on a CNC machine so it outputs a single file containing both top and bottom drilling.
- Scan panel labels to detect the correct CNC filePanel labels include a barcode that a CNC machine scans to detect the correct file for that panel.
- Check how nesting NC Z values follow machine settingsLearn how the Z values in a nesting NC follow the machine's settings, including what happens when a router is too big for a pocket contour.
- Fix labels not produced on the boring machineScan the drill QR code from the cutting-stage label so the boring machine produces its labels.
- Get board layout and direct XML file for CNCFor production, the platform can provide a board layout as well as a direct XML file for CNC.
- How Material.csv and Sheet.csv are derived in Biesse nesting machine filesLearn what the Material.csv and Sheet.csv master files in a Biesse (CIX) nesting machine zip contain and how their rows and sheet sizes are derived.
- How machine output files drive machine operationLearn which output files machine operation uses and which generic output is available for a project.
- Match cutlist export format to your saw machinePick a cutlist file format that is known to work with your saw brand so imported panels keep their correct dimensions.
- Set cut list preferences for decimals, quotes, info and CNC machineSet the cut list preferences that control decimals, text shown in quotes, additional information and the CNC machine.
- Turn on panel label rotation for a machineEnable the per-machine setting so that machine's output has rotated panel labels.
- Verify board layout before downloading machine filesCheck the board layout of a republished design so you can spot how many board types and sheets will be produced and catch mistakes before downloading machine files.
More guides 19
Show all (19)
- Download saw files for a beam saw from the MES portalGet the XML saw file for a BSA beam-saw machine from the work order in the MES portal.
- Create custom cuts in edit panel design and include them in CAMDraw and offset a custom shape on a panel, define it as a cut with a depth, and enable the include in CAM option so the machining reaches the CNC files.
- Enter saw tool name, thickness and axis for back-panel groovingAdd a saw tool row in the CNC machine settings so back-panel grooving operations carry the right tool name, thickness and axis.
- Set routing line tool position L, R or C for cut alignmentClick a routing line to see the tool position with L, R and C options, specify a preferred tool, and check the panel preview by selecting the machine instead of raw view.
- Create panel pockets via edit panel design and include in CAMAdd a shaped operation such as a shaker-style pocket to a panel and carry it through to the manufacturing output.
- Create parametric pockets and dog-bone cutouts on panelsMachine pockets into panel faces, size them parametrically, and use routing for dog-bone and horizontal cutouts.
- Read a panel's machining and edge-band drawing in 2D Panel CAM ModeOpen a panel's Enter 2D Panel CAM Mode to see its hinge cups, Drill Legend, contour legend and edge-band labels as the machine will cut it.
- Create a groove set to cut and include it in CAM for pocketingMachine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.
- How the production portal supports QC on the shop floorSee how the production portal surfaces quality-control checks and machine-ready output without changing the original design.
- Open a panel in 2D panel CAM mode in productionOpen the panel in 2D panel CAM mode in production when a panel drawing is ambiguous about which side a finish or drill hole belongs to.
- Restrict a panel area from grooving or drilling via clamping obstructionDefine a restricted rectangular area on a panel in the Clamping Obstructions table so the software rotates the panel when a groove or drilling operation falls inside it.
- Set the preferred router tool for back panel groovesSet the default router tool for the Back Panel Groove operation in a CNC machine's settings, choosing from tools identified by name, diameter and axis.
- Visualise cabinet assembly with exploded viewsCreate exploded views to see how a cabinet goes together, then refresh admin settings to update columns and generate the CNC zip for machine upload.
- Check clamping-area warnings when downloading a drawingDownload a drawing or machine file for a work order and see which operations fall inside the restricted clamping area.
- Check panel origin and drilling via 2D panel drawingOpen the 2D panel drawing from single-unit CAM mode or from panel section construction in 3D to inspect an operation's connection type, connector card name, hardware SKU name and rule.
- Delete all SKUs via bulk action in edit modeClear the whole SKU list in one operation instead of deleting items one by one.
- How the ORLST origin in Biesse CIX files is chosenLearn how Infurnia picks the ORLST bed origin for each panel, from the Default Machine Origin or the range-based origin table.
- Set up production without a beam sawIf your factory has no beam saw machine, the setup is simpler.
- Why Z values in the .nc file don't match the configured Safe ZLearn which NC machine settings fields actually control the Z values written to the .nc file.