Add and edit a drill in 2D Panel CAM Mode

Add a drill to a panel in 2D Panel CAM Mode and edit its position, steps and machine depth settings.

1. A drill added in a production design's 2D Panel CAM Mode ('Add Drill', then a click on the panel) is labelled PD1 with Operation Source 'Custom Drill', depth 10 and diameter 30 by default.

2. A drill added in a production design's 2D Panel CAM Mode ('Add Drill', then a click on the panel) is editable X(Red) / Y(Green) / Z(Blue), Number of Steps and no Connector rows.

3. On a side panel X and Z lie in its face and Y runs through its thickness.

4. Settings > Machines > a machine's edit icon opens 'Machine settings' in edit (Cancel / Save). Every mandatory CAM field is marked '*'; Save with one empty is refused with '“<field name>” is required' and the dialog stays open. Depth Per Pass sits per operation section: Router 'Depth Per Pass *' (default 10), Drill 'Depth Per Pass when diameter <= 12' (15) and 'when dia. > 12 mm' (10), Pocket 'Absolute Depth *' (10); the tool lists carry name, diameter / thickness and direction only. A work order's CNC Machining tab shows the same settings read-only from the machine card's settings icon, with an Edit that opens Settings > Machines.

   ✓ Checked in the product on 19 October 2026

5. When a repeated cut has Include in CAM on, each copy becomes its own contour in the production design's 2D Panel CAM Mode, named after the shape's label with the copy's number (PC1_1 to PC1_5 for 5 copies), and all of them share one Contour Legend entry for the operation (for example 'A Pocket, depth 5, External').

   ✓ Checked in the product on 19 October 2026