캐비닛 및 모듈형 유닛
가이드: 298
- 캐비닛의 너비, 깊이, 높이에서 제외되는 항목 알아보기셔터, 상판, 걸레받이와 같은 부분이 입력한 치수와 별도로 추가되는지 알아보세요.
- 캐비닛 구조, 걸레받이, 상판, 몸통 패널 맞춤 설정선택한 캐비닛에서 맞춤 설정 탭을 열어 구조, 걸레받이, 상판, 몸통 패널을 설정하세요.
- Split a tall unit into solid bottom and glass top shuttersBuild a mixed tall unit with a solid bottom shutter and a glass top shutter by setting the top shutter mechanism and panel core materials.
- 붙박이장과 주방 하부장의 높이 비교붙박이장 높이는 걸레받이를 포함하지만 주방 하부장 높이는 몸통 상자만 포함하는 방식을 확인하세요.
- 기본 캐비닛 구조 파라미터 확인인피니아가 뒷판 홈 파기, 도어 축소, 선반 유격, 뒷판 오프셋, 하부장 상판에 사용하는 기본값을 알아보세요.
- 사용자 정의 패널과 패널 디자인 편집으로 곡면 캐비닛 만들기캐비닛 레벨에서 사용자 정의 패널을 추가하고, 카커스 매개변수로 크기를 지정하고, 오프셋을 조정하여 올바르게 배치하면 곡면 캐비닛을 만들 수 있습니다.
- 선반, 서랍, 옷걸이봉으로 붙박이장 내부 구성하기붙박이장 내부를 구성하려면 선반, 서랍, 수직재, 옷걸이봉, 인출식 옷걸이봉을 올바른 순서로 추가하세요.
- 칸막이, 선반, 서랍 시스템으로 붙박이장 내부를 구성하세요붙박이장의 칸막이 안에 Add shelves, 서랍 시스템, 구성 옵션을 배치하여 내부를 구성하세요.
- 기존 도어를 교체하여 표준 옷장을 슬라이딩 옷장으로 전환기존 도어를 삭제하고 2도어 또는 3도어 슬라이딩으로 구성된 새 도어 시스템을 추가하여 표준 옷장을 슬라이딩 옷장으로 전환하세요.
- 관리자 탭에서 캐비닛 심재 변경관리자 탭에서 캐비닛 또는 코너 유닛의 심재를 업데이트하고 설정을 확인하면 변경 사항이 선택한 유닛에 적용됩니다.
- 캐비닛 단위의 셔터와 몸통 마감 및 심재 설정속성 패널에서 셔터와 몸통 마감 및 심재를 선택하면 상속하는 셔터가 캐비닛을 따릅니다.
- Change Materials에서 캐비닛의 마감재, 심재, 엣지밴드를 변경하세요Change Materials을 사용하여 캐비닛의 마감재와 심재를 먼저 변경한 다음 엣지밴드를 변경하세요.
- 디자인에서 캐비닛의 뒷판, 상판, 하판 및 측판 구성각 캐비닛 판을 개별적으로 구성하여 크기, 재질, 엣지 밴드, 조명 및 하드웨어가 필요한 구조와 일치하도록 하십시오.
- 여러 유닛에 3mm 간격 적용여러 유닛에 한 번에 좌우 각 1.5mm 줄임과 3mm 도어 간격을 설정합니다.
- 벽면장 높이 계산 방법타일링, 걸레받이, 캐비닛, 화강암 두께의 합이 실제로 무엇을 측정하는지, 그리고 벽면장의 바닥부터의 높이가 어디서 나오는지 알아보세요.
- 환경설정 변경 전에 추가된 유닛 업데이트이미 배치된 캐비닛에 셔터, 몸체, 뒷판 코어 자재를 다시 적용하여 현재 환경설정과 일치하도록 합니다.
- 옷장 내부 구성, 서랍 세트 및 거울 추가수직 칸막이, 선반, 걸이 액세서리, 서랍 세트 및 셔터 거울을 추가하여 옷장 내부를 완성하십시오.
- 캐비닛과 코너 유닛에 구조 스타일 적용구조 스타일은 캐비닛과 코너 유닛에 대해 각각 별도로 정의된다는 점을 알아보세요.
- 시스템을 편집하여 셔터 캐비닛을 서랍과 바구니로 변환셔터를 제거하고 시스템을 사용자 지정하여 단일 셔터 캐비닛을 고리버들 바구니와 서랍 유닛으로 바꾼 다음, 서랍과 칸막이를 추가, 제거 및 조정하세요.
- 로프트 프레임과 박스 부품으로 붙박이장 로프트 만들기셔터 시스템 구성에서 개폐 방향을 조정하고 개폐 방향을 전환하세요.
- 여러 캐비닛에서 누락된 다웰, 미니픽스 또는 PVC 다리를 수정여러 캐비닛에서 다웰, 미니픽스 또는 PVC 다리가 누락된 경우, 적용된 구성 스타일에서 Remove All Connectors이(가) 켜져 있는지 확인하세요.
- 여러 캐비닛의 입면도를 생성하고 마감재를 일괄 변경캐비닛의 2D Drawings을(를) 열어 여러 캐비닛을 포함하는 입면도를 생성한 다음, 캐비닛을 그룹 선택하여 한 번에 재질과 마감재를 변경하세요.
- 캐비닛 구조가 셔터, 서랍, 액세서리로 나뉘는 방식캐비닛 구조가 셔터, 서랍, 액세서리로 어떻게 나뉘는지, 그리고 셔터 시스템과 서랍 시스템이 각각 어떻게 구성되는지 알아보세요.
- 주방 키큰장의 높이와 깊이 측정 방법주방 키큰장의 높이와 깊이를 측정할 때 제외되는 부분을 알아보세요.
- 옷장 옆판이 바닥까지 닿는 방식옷장 옆판이 바닥까지 전체 길이로 이어지는 방식과 앞 걸레받이를 위해 컷아웃을 만드는 이유를 알아보세요.
- 마감재 및 엣지밴드 설정을 열려면 캐비닛을 선택하세요캐비닛을 선택하여 속성 패널을 연 다음, Materials에서 마감재, 뒷판 코어 및 엣지밴드를 설정하세요.
- 수직 칸막이로 수납장 공간 나누기Add vertical partitions을 사용하여 공간을 나누고 비율 또는 직접 입력한 값으로 너비를 설정합니다.
- 캐비닛을 프로파일 손잡이 또는 손잡이 없는 도어로 전환디자인 중에 캐비닛을 일반 손잡이에서 프로파일 손잡이 또는 손잡이 없는 도어로 별도의 카탈로그나 구성 설정 없이 바로 변경하세요.
- 한 유닛을 배치한 뒤 복사하고 정렬하여 주방 레이아웃 만들기벽 유닛 또는 로프트 하나를 올바른 위치에 배치한 뒤, 나머지 유닛을 복사하고 정렬하여 주방 레이아웃을 만드세요.
- 옷장 구조를 수동으로 변경하고 뒷걸레받이를 끄기슬라이딩 옷장의 구조를 수동으로 변경하고 뒷걸레받이를 꺼서 옷장을 사용자 지정합니다.
- 가구 모델 라이브러리에서 드레서, TV 및 전장 유닛을 배치합니다미리 만들어진 모델이나 직접 만든 디자인으로 드레서, TV 및 전장 유닛을 배치한 다음, 맞게 조정하세요.
- 캐비닛을 배치하기 전이나 후에 회전하기furnish 도구에서 캐비닛을 배치하고, 배치 전에는 스페이스 바를 눌러 회전하고, 배치 후에는 rotate 옵션으로 회전하세요.
- 프로젝트별로 캐비닛과 붙박이장 기본 설정 지정디자인의 기본 설정 메뉴를 열어 프로젝트에 계정 전체 기본값 대신 자체 캐비닛 및 붙박이장 재질 기본값을 지정하세요.
- 중앙 수납장 옆판 구성 이해하기중앙 수납장의 옆판이 기본적으로 어떻게 구성되는지, 그리고 왼쪽, 오른쪽, 위, 아래 판이 어떻게 맞물리는지 알아보세요.
- 빠른 액세스 패널에서 주방 수납장 높이 이해하기주방 수납장의 빠른 액세스 패널에 표시되는 높이가 무엇을 측정하며, 이를 편집하면 무엇이 바뀌는지 알아보세요.
- 카탈로그에서 유닛을 골라 놓아 캐비닛 추가하기카탈로그를 열고 하부장 카테고리를 선택한 뒤 필요한 너비의 캐비닛을 골라 배치도에 놓으면 디자인이 만들어집니다.
- FR enter와 룸 템플릿으로 캐비닛 추가하기FR과 enter로 캐비닛 라이브러리를 열고, 하부장이나 벽걸이장을 배치하고 회전하고 크기를 조정하고 복제하세요.
- 빈 카카스에서 옷장 내부를 직접 구성하세요카탈로그에서 옷장 옵션을 배치하고 선반과 수직 패널 또는 미리 만들어진 칸막이 구성을 사용하여 내부를 직접 구성하세요.
- 캐비닛 크기 변경 및 자재 카테고리 이해속성 패널에서 캐비닛 크기를 조정하고 자재가 어떻게 그룹화되는지 알아보세요.
- 셔터를 추가하기 전에 옷장을 주요 칸막이로 나누세요먼저 옷장을 주요 칸막이로 나눈 다음, 선반과 수직재를 위해 세분화하고, 마지막으로 맞춤형 메커니즘을 갖춘 셔터 시스템을 추가하세요.
- 캐비닛 모듈의 너비, 높이, 깊이 범위가 적용되는 방식각 캐비닛 모듈의 치수 규칙이 최소 및 최대 너비, 높이, 깊이를 설정하고 디자이너가 그 한도 내에서 작업하도록 유지하는 방법을 알아보세요.
- 표준 하부장 치수가 작동하는 방식Learn the standard base unit depth and height used in kitchen modelling and what those measurements leave out.
- 평면도에서 주방 유닛 이동 및 회전MV 명령 또는 이동 도구로 주방 유닛을 이동하고 스페이스바로 회전하여 벽에 올바르게 배치하세요.
- 2D 및 3D 보기에서 캐비닛 이동캐비닛을 위아래로 이동하고 2D 보기 또는 3D 보기에서 위치를 변경하세요.
- 올바른 위치 지정을 위해 평면도에 캐비닛을 배치하세요인접한 캐비닛에 스냅되도록 평면도에 캐비닛을 배치하고, 스페이스 바를 사용해 회전하세요.
- Repurpose a cabinet into another unit typeSwitch off unneeded panels, set the size and add internal divisions to turn a cabinet into a different type.
- 높은 유닛의 개방 방향을 전환하고 리프트업 메커니즘을 설정합니다높은 유닛의 개방 방향을 전환하고 메커니즘을 단일 리프트업 구성으로 설정합니다.
- Pricing Quotation에서 수납장과 서랍 레일이 어떻게 표시되는지 알아보세요.Base Unit, Wall Unit, Tall Unit 수납장이 어떻게 라벨링되고 목록에 표시되는지, 그리고 견적서에서 서랍의 레일이 어떻게 산정되고 가격이 책정되는지 알아보세요.
- 옷장에 맞춰 자동으로 크기가 조정되는 미리 만들어진 내부 구성을 사용하세요.customize 옵션을 통해 옷장 내부 구성을 추가하고 선반 하나의 높이를 조정하면 나머지 선반의 크기가 자동으로 조정됩니다.
- 옷장 구조를 목재 패널 구성으로 설정목재 패널 구성 섹션을 사용하여 옷장 구조를 설정하고 수직 패널 및 서랍과 같은 내부 및 외부 구성 요소를 추가하십시오.
- 입면도에서의 치수 단위 Align Dimension입면도에서 같은 방향을 따라 단위의 몸통, 칸막이, 도어의 모서리와 연속 치수를 선택하세요.
- 뷰별 레이어를 사용하여 캐비닛 유형별로 별도의 평면도를 생성합니다베이스, 벽, 로프트 유닛이 각각 따로 인쇄되도록 캐비닛 유형마다 고유한 평면도를 만드세요.
- 벽걸이장 걸이 브래킷으로 벽걸이장을 거세요하드웨어 창고의 벽걸이장 걸이 브래킷을 사용하여 벽걸이장을 거세요.
- 옷장 구성 스타일이 몸체 파라미터를 저장하는 방식Learn which carcass parameters a wardrobe unit construction style holds and how updating the style applies them to the wardrobe.
- 몸통 패널 두께를 사용하여 하부 패널을 안쪽으로 오프셋하기하부 패널을 패널 두께만큼 올려 측면 패널 아래가 아닌 몸통 안쪽에 위치하도록 합니다.
- Furnish와 이동 도구를 사용하여 로프트 유닛을 배치하고 이동하세요Kitchen Furniture에서 로프트 유닛을 배치하고, 화살표 옵션이나 이동 도구로 이동하며, 필요에 따라 박스 로프트를 추가하거나 크기를 조정하세요.
- 기본 1mm 캐비닛 축소 이해하기기본적으로 서랍 레벨 구성에서 모든 캐비닛은 사방이 1mm씩 축소되는 방식을 알아봅니다.
- 싱크대 레일과 걸레받이 옵션 이해하기싱크대가 상단 레일과 후면 레일로 어떻게 구성되는지, 그리고 캐비닛 걸레받이 옵션에서 걸레받이를 켜거나 끄는 방법을 알아보세요.
- 선택 트리를 사용하여 캐비닛, 파티션, 셔터 및 패널 컨트롤에 접근하세요캐비닛 부품을 선택하면 상위 레벨이 표시되며 필요한 컨트롤로 바로 이동할 수 있습니다.
- 한 번의 클릭으로 표준 붙박이장 내부 구성을 추가하세요붙박이장에 하단 서랍과 같은 표준 구성을 직접 만들지 않고 한 번의 클릭으로 추가하세요.
- 두 캐비닛 사이에 수직 골라 프로파일 추가두 캐비닛을 모두 선택하고 왼쪽의 속성 메뉴를 열어 두 캐비닛 사이에 수직 골라 프로파일을 추가하세요.
- 올바른 레벨에서 가구 라이브러리의 주방 유닛을 추가하세요주방 레벨에서 작업하면서 가구 라이브러리의 주방 유닛을 배치하면 올바른 높이에 놓입니다.
- 모듈형 하부장, 벽면장, 오픈장으로 TV장 만들기Furnish 패널을 열고 다목적 모듈형 가구를 선택한 뒤, 유닛을 조합하고 회전하고 배치하여 TV장을 구성하세요.
- 기본 유닛에서 유닛의 너비, 깊이, 높이를 일괄 변경기본 유닛을 선택하고 너비, 깊이, 높이 값을 편집하여 치수를 일괄 변경하세요.
- 캐비닛 레벨에서 캐비닛 내부 색상 변경캐비닛을 선택하고 캐비닛 레벨로 이동한 뒤 내부 색상을 설정하면 변경 사항이 캐비닛 내부에 적용됩니다.
- construction 및 position 필드로 캐비닛 잠금장치 변경 또는 위치 조정잠금장치는 독립된 객체가 아니라 캐비닛에 속하므로, 3D에서 잠금장치를 선택하고 position 필드를 조정하여 위치를 변경하십시오.
- 다중 선택으로 여러 유닛을 한 번에 변경변경을 함께 적용할 유닛만 선택한 다음, 모두에 한꺼번에 적용하세요.
- 여러 벽걸이장의 구조를 한 번에 변경모서리장을 제외한 모든 벽걸이장을 선택한 다음 일괄 작업을 사용하고 일괄 구조를 선택하여 함께 변경하세요.
- 기존 캐비닛에만 적용되는 커넥터 카드 복제커넥터 카드를 복제하여 기존 캐비닛에만 적용되는 수정 버전을 만드세요.
- Combine two cabinets into a single user componentCombine two separate cabinets into one user component that behaves as a single unit.
- 블라인드 코너 유닛을 오른쪽 또는 왼쪽으로 구성하기블라인드 코너 유닛을 오른쪽 또는 왼쪽 옵션으로 설정하여 올바르게 구성하세요.
- Ctrl+C와 Ctrl+V로 배치된 붙박이장 복제하기배치된 붙박이장 유닛을 복사하여 남은 공간에 붙여넣은 다음, 유닛을 서로 뒤로 끌어 위치를 조정하세요.
- Edit connector 단일 유닛 패널 캠 모드에서 캐비닛당 카드 간격다른 캐비닛에 영향을 주지 않고 한 캐비닛에만 커넥터 카드 간격을 변경합니다.
- 붙박이장의 너비, 높이, 깊이 편집붙박이장의 너비, 높이, 깊이를 변경하면 내부 레이아웃이 자동으로 조정됩니다.
- SU 단축키로 Single Unit CAM Mode을(를) 입력하세요생산 설계에서 SU 키보드 단축키를 사용하여 패널의 Single Unit CAM Mode을(를) 여세요.
- 다용도 모듈 가구에서 TV 베이스와 TV 서랍 유닛을 찾아보세요다용도 모듈 가구 섹션에서 싱글 도어 또는 더블 도어, 숏·450·600 높이의 TV 베이스와 TV 서랍 유닛을 찾을 수 있습니다.
- 걸이 구역의 옷장 행거 찾기걸이 구역의 파티션 레벨 아래에서 액세서리로 옷장 행거를 찾으세요. 비브랜드 행거는 이미 스토어에서 이용할 수 있습니다.
- 허용 범위를 벗어난 캐비닛 너비 수정허용 범위 내의 캐비닛 너비를 입력하여 시스템이 구조가 유효하지 않다는 오류를 표시하지 않도록 하십시오.
- 2D 캐비닛 배치도에서 3D 모델 생성2D 디자인 뷰에서 캐비닛을 배치하고 3D로 전환하면 배치도에서 3D 모델이 자동으로 생성됩니다.
- 캐비닛의 재질 속성을 설정하는 방법캐비닛의 재질 속성은 여러 개의 개별 필드를 통해 설정되며, 셔터 외부 마감은 일반적으로 나머지와 별도로 선택합니다.
- 1800mm를 초과하는 캐비닛이 로프트 유닛으로 처리되는 방식Auto Presentation 템플릿의 최소 높이와 Loft detection 스위치가 1800mm를 초과하는 캐비닛을 로프트 유닛으로 간주할지 결정하는 방법을 알아보세요.
- 최소 및 최대 캐비닛 크기 제한이 작동하는 방식최소 및 최대 크기 제한이 캐비닛의 너비, 높이, 깊이에 어떻게 적용되는지와 어디에서 설정되는지 알아보세요.
- admin portal에서 기존 캐비닛 항목을 관리하고 편집합니다admin portal에서 기존 캐비닛 항목을 관리하고 편집합니다.
- 주방 가구 라이브러리에서 벽장과 키큰장을 배치합니다주방 가구 라이브러리에서 벽장 또는 키큰장을 배치하고 치수를 조정하세요. 다른 장 유형과 동일한 배치 옵션을 사용합니다.
- Y축을 사용하여 벽면 수납장 위에 로프트를 배치합니다로프트가 벽면 수납장 위에 올바르게 놓이도록 로프트의 Y축을 벽면 수납장의 Y축에 600mm를 더한 값으로 설정합니다.
- SKU 구조 변경 후 캐시를 새로 고치고 캐비닛을 교체하세요카탈로그에서 SKU 구조를 수정한 후 캐시를 새로 고치고 design portal의 캐비닛을 교체하세요.
- Rotate a cabinet and set its position and rotationTurn a selected cabinet with the space bar or an exact Y angle, rotate a panel's finish, and read Position Y correctly against bottom height.
- 유닛 수준 변경이 패널에 어떻게 전파되는지 확인하세요유닛 수준의 재질 변경이 언제 패널에 적용되는지, 그리고 자동화 규칙과 연결된 SKU가 이를 어떻게 재정의할 수 있는지 알아보세요.
- 사이징 규칙으로 캐비닛 크기의 최소 및 최대 한도 설정소스 모델과 관리자 포털에서 사이징 규칙을 구성하여 캐비닛 치수가 허용 한도를 넘지 않도록 하십시오.
- 캐비닛 또는 파티션에 외부 및 내부 한계에 대한 사이징 규칙 설정유닛의 한계가 외부 치수에 적용되는지 내부 여유 공간에 적용되는지 선택하고, 한 번에 하나의 유닛에 적용하거나 일괄 적용하십시오.
- 평면도에서 캐비닛 라벨을 명확하게 표시각 캐비닛은 평면도에서 번호 라벨을 표시하며, 텍스트가 다른 요소와 겹칠 때는 사용자 지정 지시선 스타일 라벨을 추가할 수 있습니다.
- 캐비닛, 옷장 및 맞춤 패널 카테고리 이해하기Infurnia가 유닛을 캐비닛, 옷장, 맞춤 패널의 세 가지 카테고리로 구성하는 방법을 알아보세요.
- FR 단축키로 붙박이장 설계 만들기FR 단축키로 붙박이장 설계를 시작한 다음, 양문형 여닫이문을 배치하고 내부 몸통 요소를 관리하세요.
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- 캐비닛에 안정 레일 추가, 간격 배치 및 제거캐비닛의 속성 패널에서 안정 레일을 추가하면 시스템이 하단 패널과 상단 패널 사이에 레일을 균등하게 배치합니다.
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- 캐비닛 편집 패널 탭에서 설정 찾기Quick Access, Customize, Construction 탭과 선택 트리를 사용하여 필요한 설정에 접근하세요.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- 수납장이 레벨로 구성되는 방식디자인 모듈의 수납장은 수납장, 파티션, 셔터 시스템, 패널 레벨로 구성되며, 각 레벨에는 고유한 설정이 있습니다.
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- 새 프로젝트에서 사용하는 단위와 정확도를 확인하세요새 프로젝트는 밀리미터 단위로 측정되며 정확도는 1 mm입니다.
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs 설정에서 유닛 및 패널 주석 재지정두 가지 모드 중 하나를 사용하여 출력물의 유닛 및 패널 레이블을 다시 번호 매기세요. 변경은 되돌릴 수 없으므로 먼저 확인하세요.
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- 회전하기 전에 캐비닛을 선택하세요회전 시 캐비닛이 경계 상자를 벗어나지 않도록 먼저 캐비닛을 선택하세요.
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- 바닥 타일 간격 위로 벽면 유닛 하단 높이를 설정합니다기본 유닛이 제로 레벨 위 12 mm에 위치하는 이유를 알아보세요. 따라서 벽면 유닛 하단 높이는 표준 1450 mm보다 12 mm 위로 설정됩니다.
- 블라인드 코너 유닛과 더미 패널 설정하기셔터와 비셔터 전면 패널 사이에 더미 패널이 있는 블라인드 코너 유닛을 만들고 깊이를 설정하세요.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- 입면도에서 스켈레톤 모드로 캐비닛 내부 보기입면도에서 Turn on Skeleton mode을(를) 사용하면 셔터를 숨기고 캐비닛의 내부 칸막이와 몸체를 드러내어 직접 치수를 기입할 수 있습니다.
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- 단일 유닛 모드에서 필터를 사용하고 충돌을 자동으로 해결하세요단일 유닛 모드에서 충돌 감지를 실행하고 위반 항목만 필터링한 뒤 오른쪽 하단 옵션에서 해결하여 충돌을 처리하세요.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- Add a drawer to a cabinet via partition level and drawer setInsert a drawer inside a cabinet from its partition level, then set its heights and add a shelf below if needed.
- 캐비닛과 옷장의 셔터 디자인 저장 및 재사용Infurnia에서 셔터 디자인을 저장하고 modify shutter design을 통해 캐비닛과 옷장에 적용하세요.
- 유닛에 걸레받이를 추가하고 오른쪽 면에 표시하기비목재 걸레받이를 켜고, 몸통 높이를 올바르게 설정하고, 면별로 걸레받이 표시를 활성화하세요.
- 전체 캐비닛 또는 단일 칸막이에 셔터 시스템 추가개방형 캐비닛 전체 또는 칸막이 하나에만 셔터 시스템을 추가합니다.
- 옷장에 내부 서랍 추가 및 구성분할판 높이를 정의하고 서랍을 내부 및 박스 유형으로 설정한 뒤, 충전재를 셔터 두께에 맞추어 옷장에 내부 서랍을 추가합니다.
- 여러 유닛의 코어와 재질 변경을 한 번에 적용일괄 편집, 그룹 선택, 공통 속성을 사용하면 여러 캐비닛과 붙박이장의 재질을 한 번에 변경할 수 있습니다.
- 유닛의 걸레받이 유형 및 높이 설정유닛별로 목재 또는 비목재 걸레받이를 선택하고, 제작 옵션에서 걸레받이 높이를 설정하세요.
- 캐비닛 구성 공식에서 패널 두께 참조원시 숫자를 입력하는 대신 제안에서 두께 매개변수를 선택하여 구성 공식에서 패널의 두께를 참조하세요.
- 캐비닛 양쪽의 필러 패널 복제 및 수정필러 패널을 복제한 후 수정하여 캐비닛의 각 측면에 자체 필러가 배치되도록 하세요.
- 캐비닛 설정에서 캐비닛 걸레받이를 구성하세요캐비닛 구성에서 캐비닛 걸레받이 옵션을 찾으세요.
- 캐비닛에서 서랍 시스템이 작동하는 방식서랍 단위에서 서랍 시스템을 구성하는 방법을 알아봅니다. 여기에는 메커니즘 유형 선택과 서랍별 하드웨어 혼용이 포함됩니다.
- 한 캐비닛의 몸체 마감 변경캐비닛 수준에서 몸체 마감을 변경하면 선택한 캐비닛의 모든 몸체 패널이 함께 업데이트되며, 같은 종류의 다른 캐비닛에는 영향을 주지 않습니다.
- 캐비닛을 복사하여 붙여넣으면 유사한 캐비닛을 빠르게 만들 수 있습니다먼저 캐비닛 하나를 완전히 조정한 다음 복사하여 붙여넣으면 각 캐비닛을 개별적으로 조정하는 것보다 더 빠르게 여러 개의 유사한 캐비닛을 만들 수 있습니다.
- 캐비닛의 모든 패널에 엣지 밴드 하나를 적용합니다캐비닛 수준에서 엣지 밴드를 추가하면 해당 캐비닛의 모든 패널에 적용됩니다.
- 주방 캐비닛 걸레받이가 전체 유닛 높이에 미치는 영향주방 캐비닛의 약 100mm 걸레받이가 치수에 표시된 몸체 높이에 더해져 전체 유닛 높이가 되는 방법을 알아보세요.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- 드롭다운 재사용 옵션으로 여러 캐비닛 부품에 마감재를 적용하세요라이브러리에서 캐비닛의 마감재를 변경한 다음, 드롭다운을 통해 동일한 마감재를 몸체 외부와 몸체 내부 같은 다른 부품에 재사용하세요.
- 캐비닛 레벨에서 셔터 색상을, 패널 레벨에서 패널 마감을 변경캐비닛 전체의 셔터 색상과 개별 패널의 외부 마감을 설정합니다.
- Fix a drawer that crosses the cabinet frontCheck the Drawer Back Gap on an external drawer so the drawer stops crossing the cabinet front.
- 유닛에서 걸레받이 제거Skirting Visibility 아래의 전면 걸레받이를 꺼서 유닛 앞면에 걸레받이가 더 이상 표시되지 않게 합니다.
- 캐비닛 및 아일랜드 주방에 적합한 입면도를 선택하세요주방 레이아웃에 맞는 입면도 방식을 선택한 다음 도면에 치수를 추가하세요.
- 슬라이딩 셔터 유닛에서 간섭하는 서랍 필러 제거세로 칸막이가 있고 서랍이 맨 왼쪽 또는 맨 오른쪽에 있는 슬라이딩 셔터 유닛에서, 개별적으로 간섭하는 쪽의 필러를 Construction 패널에서 제거하십시오.
- 옷장에서 사용 가능한 서랍 깊이 계산옷장 서랍의 치수는 캐비닛 깊이에서 선반 리빌, 뒷판 오프셋, 뒷판 두께, 서랍 전면재 두께를 빼서 정합니다.
- 벽장 하단 패널에 스트립 조명과 스포트라이트 추가벽장의 하단 패널에 스트립 조명과 스포트라이트를 추가하여 벽장을 밝히세요.
- 모든 유닛 유형에 손가락 홈 패널 손잡이 적용손가락 홈 손잡이를 추가하면 홈이 도어에 파지고 몸체가 조정되며, 하부장, 키큰장, 서랍 모두에 적용됩니다.
- 하드웨어 규칙으로 캐비닛마다 현장 하드웨어를 지정하세요각 캐비닛과 옷장에 올바른 하드웨어를 지정하는 하드웨어 규칙을 만든 뒤, 규칙을 정리하고 활성화하여 경첩을 설정하세요.
- 여러 캐비닛의 손잡이를 한 번에 변경캐비닛을 다중 선택하고 속성 패널의 'modify handle' 옵션을 사용하여 손잡이를 함께 변경하세요.
- 유닛 구성에서 붙박이장 도어 유형 선택수동으로 모델링하는 대신 유닛 구성에서 사용 가능한 도어 유형 중 필요한 도어 배치를 선택하세요.
- 파티션과 붙박이장 전체에서 선반 노출값 관리선반 노출값이 중첩된 파티션에 어떻게 적용되는지, 여러 붙박이장에 한 번에 적용하는 방법을 알아봅니다.
- 단일 유닛의 구성에서 패널 제거구성 요소 정의는 건드리지 않고, 선택한 캐비닛에서만 하단이나 후면 같은 패널을 끕니다.
- 서랍 유닛에서 서랍 측면 축소와 전면 패널 확장 설정3 Drawer Unit에서 서랍 자체의 패널 축소와 확장을 조정하여 전면 패널의 크기와 모양을 변경합니다.
- 입면 설정에서 셔터 방향, 유닛 및 선반 주석 표시/숨기기입면 설정에서 셔터 방향, 유닛 주석 및 선반 주석을 켜거나 꺼서 표시되는 입면 주석을 제어합니다.
- 옷장에서 분리된 칸막이를 개별적으로 작업하기분할된 옷장의 각 칸막이를 개별적으로 선택하여 한 구역에만 도어를 추가하거나 다른 구역은 그대로 둔 채 선반을 변경할 수 있습니다.
- 캐비닛 레벨에서 가로 사용자 지정 패널을 추가하고 회전합니다캐비닛 레벨 사용자 지정 패널을 사용하여 캐비닛에 상단 패널을 추가한 다음, 가로 사용자 지정 패널을 추가하고 원하는 위치에 배치합니다.
- 슬라이딩 옷장에 서랍 세트 추가디자인에서 슬라이딩 옷장의 서랍 세트를 구성하세요.
- Add drawers 단위의 양쪽에먼저 수직 패널을 추가한 다음 각 측면에 서랍을 추가하면 서랍이 단위의 양쪽에 배치될 수 있습니다.
- 캐비닛 구역 내부에 칸막이와 유리를 추가캐비닛 구역 내부의 빈 공간에 칸막이를 추가하여 캐비닛 내부를 균등하게 나눕니다.
- 캐비닛에 셔터 시스템 적용스윙, 슬라이딩 또는 리프트업 셔터 시스템을 선택하고 customize 탭에서 캐비닛에 적용하세요.
- Modify Countertop로 여러 유닛에 상판 하나를 적용여러 캐비닛을 선택하고 팝업 하나에서 상판 두께와 재질을 함께 설정하세요.
- 라미네이트 솔리드를 사용하여 상판과 캐비닛 소재 변경상판을 수정하고 변경 사항을 적용하여 소재 변경을 확인하세요.
- 여러 유닛의 손잡이와 재질을 한 번에 변경여러 유닛을 함께 선택하고 change material / interchange 컨트롤로 한 번의 작업으로 마감재를 교체하세요.
- 커넥터 카드를 편집하여 전체 디자인과 향후 캐비닛을 변경하세요원본 커넥터를 편집하면 전체 디자인과 향후 캐비닛이 수정됩니다.
- 패널 치수를 고정하여 단위에 따라 크기가 조정되지 않도록 하기패널의 길이, 깊이 또는 높이를 고정 값으로 설정하면 캐비닛이나 옷장의 크기를 조정해도 해당 패널의 크기는 그대로 유지됩니다.
- 캐비닛 높이에 따라 경첩 개수와 위치가 어떻게 달라지는지하드웨어 규칙이 캐비닛 높이 범위에 따라 경첩 개수와 배치를 어떻게 정하는지, 그리고 높이가 바뀌면 자동으로 갱신되는 방식을 알아보세요.
- Place a custom panel in a cabinetAdd a custom panel from the catalogue or with Add Custom Panel, follow the dashed outline and click to commit it.
- Set end panel depth to carcass level for open unitsStop the end panel at carcass level on a top unit that has no shutter so it aligns with the carcass.
- Global Preferences에서 수납장과 옷장의 프로젝트 기준 설정프로젝트 수준에서 심재, 마감재, 도어, 손잡이를 한 번 설정하면 이후 추가하는 모든 수납장과 옷장에 해당 기준이 기본값으로 적용됩니다.
- 맹목 코너 수납장에서 도어 폭 설정맹목 코너 수납장의 도어 폭이 수납장 폭, 깊이, 높이와 함께 어디에 표시되는지 확인하세요.
- 파티션을 이해하고 캐비닛 내부에 선반, 패널 또는 서랍을 추가하세요Infurnia에서 파티션이 무엇인지 알아보고 파티션 수준에서 선반, 수직 패널 또는 서랍을 추가하세요.
- 벽걸이장에는 베이스 프로파일이 아닌 벽걸이 골라 프로파일을 사용하십시오.벽걸이장에 골라 프로파일을 추가할 때는 벽걸이 골라 프로파일을 선택하십시오. 베이스 프로파일은 벽걸이장에 맞지 않습니다.
- 걸레받이와 펠멧 옵션이 하부장 또는 벽장 유닛에 따라 달라지는 이유장의 장착 면이 어떻게 해당 장을 하부장 또는 벽장 유닛으로 정하는지, 그리고 그에 따라 어떤 걸레받이, 펠멧, 코니스, 레일 옵션을 사용할 수 있는지 알아보세요.
- 구성 방식으로 유닛 내부에 파라메트릭 사용자 정의 패널 추가유닛 내부에 수평 상단 패널을 추가하고 파라메트릭 수식으로 크기와 위치를 제어합니다.
- 주방 가구 카탈로그에서 하부장, 벽장 및 키큰장을 추가합니다Insert / Furnish의 주방 가구 아래에 있는 하부장, 벽장 및 키큰장에 더 쉽게 접근할 수 있도록 방을 주방으로 표시합니다.
- 캐비닛 구조에서 엔드 패널 추가 또는 제거선택한 유닛의 캐비닛 구조 설정에서 왼쪽 또는 오른쪽 엔드 패널을 추가하거나 제거합니다.
- 붙박이장 구성에서 걸레받이 높이와 도어 시스템 조정붙박이장 구성 옵션의 세 번째 탭에서 붙박이장과 표준 수납장의 걸레받이 높이 또는 도어 시스템을 변경할 수 있습니다.
- 전체 캐비닛 너비에서 몸체 너비 계산전체 캐비닛 너비에서 몸체 패널 두께의 두 배를 빼서 몸체 너비를 계산합니다.
- 캐비닛의 마감 높이 계산하기요소를 정렬하려면 캐비닛 높이, 걸레받이 높이, 상판 두께를 더해 전체 높이를 구하십시오.
- 선택 트리 또는 유닛을 통해 상판 재질 변경유닛을 선택하거나 선택 트리를 사용한 후 하위 카테고리와 특정 재질 또는 색상을 선택하여 상판의 재질을 변경합니다.
- 단일 유닛 캠 모드에서 패널 간 연결 확인캐비닛 패널 간의 모든 연결 시나리오, 각 시나리오에 사용되는 커넥터 카드, 실제 드릴을 확인하세요.
- admin portal에서 캐비닛에 적용되는 하드웨어 규칙을 확인하세요.캐비닛에 적용되는 하드웨어 규칙을 찾고 해당 조건과 규칙이 추가하는 하드웨어를 확인하세요.
- 배치하는 유닛 유형에 맞는 환경설정 그룹을 선택하세요배치하는 유닛 유형에 맞는 환경설정 그룹을 선택하여 하부장, 벽장, 상부 수납장 및 다목적 유닛은 캐비닛 환경설정을 사용하고 옷장은 옷장 환경설정을 사용하도록 하세요.
- 캐비닛에서 시작하여 사용자 지정 또는 구획 입면도를 생성하세요특정 캐비닛에서 입면도를 시작하여 사용자 지정 또는 구획 입면도를 생성하세요.
- 수직 골라 핸들이 두 유닛 사이에서 공유되는 방식수직 골라 핸들이 인접한 두 유닛을 어떻게 연결하고 양쪽 측면 패널에 어떻게 홈을 만드는지, 그리고 이를 제거하면 어떻게 되는지 확인하십시오.
- 상판이 표시되는 하부장 높이에 미치는 영향하부장에 상판을 추가하거나 제거해도 해당 유닛에 표시되는 몸체 높이는 변경되지 않는 이유를 알아보세요.
- 맞춤 패널이 캐비닛 아래에 나열되는 방식맞춤 패널을 추가하는 위치에 따라 어느 캐비닛 아래에 나열되는지 알아보세요.
- 확장과 캐비닛 조정이 패널 치수를 결정하는 방식패널의 총 두께가 심재와 마감재로부터 어떻게 계산되는지, 그리고 그 계산이 프리라미네이트 심재와 포스트라미네이트 심재에서 어떻게 다른지 알아봅니다.
- 내부 및 외부 마감재를 캐비닛에 연결마감재 속성에서 외부 및 내부 마감재를 연결하여 캐비닛에 마감을 적용합니다.
- 유닛에 노출 패널 설정하기유닛 수준 기본값으로는 설정할 수 없으므로, 유닛을 패널 수준에서 열고 해당 패널을 노출 패널로 변경하세요.
- 캐비닛을 배치하기 전에 몸통 코어와 뒷판 소재 기본값을 설정하세요캐비닛 수준 환경설정에서 몸통 코어와 뒷판 코어 소재를 선택하면 새 캐비닛이 해당 소재로 추가됩니다.
- gola 및 G-profile 캐비닛의 상판 치수 설정gola profile은 상판을 뒤쪽으로 약간 오프셋하고, G-profile은 상판을 카커스 크기로 유지하는 방법을 알아보세요.
- 경사진 캐비닛 형상에는 사용자 정의 패널 사용표준 캐비닛 패널을 회전하는 대신 별도의 사용자 정의 패널을 사용하여 경사지거나 비표준인 캐비닛 형상을 만드세요.
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- 옷장 아래에 하부 지지 패널 추가하부 지지 패널의 개수와 높이를 설정하여 걸레받이 영역에서 장 하부 아래에 고르게 서도록 하십시오.
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- 캐비닛에 올바른 왼쪽 또는 오른쪽 끝 패널을 선택하세요캐비닛에 왼쪽 또는 오른쪽 끝 패널을 추가할 때, 방향은 장치의 도어를 마주 보고 결정됩니다.
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- 자동화 규칙이 유닛별로 실행되고 다시 적용되는 방식자동화 규칙이 유닛별로 어떻게 평가되고, 실행할 때마다 초기화 후 다시 적용되는지, 어떤 유닛과 패널이 건너뛰어지는지 알아보세요.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3D 보기에서 유닛을 격리하고 QC 범위를 한 방으로 한정하기벽에 가리지 않고 유닛을 가까이에서 검사한 다음, 해당 방에 자체 작업 범위를 지정하여 그 방만 QC를 실행합니다.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
다른 가이드 10
모두 보기 (10)
- 일괄 편집 구조로 제작 및 생산 설정 적용일괄 편집 구조 옵션을 사용하여 수납장과 옷장에 제작 및 생산 구성 설정을 적용하세요.
- 관리자 포털 규칙 또는 수동으로 연결 부속 추가admin portal에서 규칙을 정의하여 가져온 캐비닛 중 규칙에 해당하는 캐비닛에 규칙의 연결 부속이 자동으로 적용되도록 하거나, 연결 부속을 수동으로 추가하여 연결 부속을 추가할 수 있습니다.
- 고라 및 프로파일 배치캐비닛 모델링에서 고라와 프로파일이 어디에 적용되는지, 그리고 둘 다 같은 캐비닛에 나타날 수 있는 방법을 알아보세요.
- 구성 맞춤 설정으로 걸이 레일 추가옷장에 걸이 레일을 추가하려면 상단에서 구성 맞춤 설정을 열고 걸이 레일 옵션을 선택한 다음 카탈로그에서 선택하세요.
- 빠른 접근, 사용자 설정, 구성 중에서 선택하세요일반적인 변경이든 요소 추가든, 하려는 변경에 맞는 캐비닛 사용자 설정 메뉴를 선택하세요.
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- 스케줄, 복합 BOQ 및 스케줄 템플릿 이해스케줄 기반 출력이 숨겨진 요소와 workscope에서 제외된 요소를 어떻게 처리하는지, 캐비닛 복합 BOQ가 어떻게 인쇄되는지, 스케줄을 저장하고 내보내는 방법을 알아보세요.
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.