キャビネットとモジュラーユニット
ガイド:298
- キャビネットの幅・奥行き・高さに含まれないものを理解する入力した寸法とは別に、扉や天板、幅木などの部品が追加されることを確認します。
- キャビネットの構造、幅木、天板、胴板をカスタマイズ選択したキャビネットのカスタマイズタブを開き、構造、幅木、天板、胴板を設定します。
- 背の高いキャビネットを、下部はソリッド扉、上部はガラス扉に分割する上部扉の機構とパネルの芯材を設定して、下部がソリッド扉、上部がガラス扉の混在した背の高いキャビネットを作成します。
- ワードローブとキッチンキャビネットの高さを比較するワードローブの高さには巾木が含まれ、キッチンキャビネットの高さはキャーカス(箱)のみであることを確認してください。
- キャビネットの標準的な構造パラメータを確認するLearn the default values Infurnia uses for back panel grooving, shutter reduction, shelf reveal, back panel offset and base cabinet tops.
- Create a curved cabinet with a custom panel and panel design editsBuild a curved cabinet by adding a custom panel at cabinet level, sizing it from carcass parameters, and adjusting its offsets so it sits correctly.
- 棚板、引き出し、ハンガーポールでワードローブの内部を構築するワードローブの内部を構築するには、棚板、引き出し、縦仕切り、ハンガーポール、引き出し式ハンガーポールを正しい順序で追加します。
- 間仕切り、棚、引き出しシステムを使ってワードローブの内部を構築するAdd shelves、引き出しシステム、構築オプションをワードローブの間仕切り内に配置して、内部を構築します。
- 既存の扉を交換して標準的なワードローブを引き戸式にする既存の扉を削除し、2枚扉または3枚扉の引き戸式として設定した新しい扉システムを追加することで、標準的なワードローブを引き戸式ワードローブに変えられます。
- 管理タブでキャビネットの芯材を変更する管理タブからキャビネットまたはコーナーユニットの芯材を更新し、設定を確定すると、選択したユニットに変更が適用されます。
- キャビネット単位の扉とキャ carcass の仕上げ・芯材を設定するプロパティパネルで扉とキャ carcass の仕上げと芯材を選択すると、継承する扉はキャビネットに従います。
- Change Materialsからキャビネットの仕上げ材、芯材、エッジバンドを変更しますChange Materialsを使用して、まずキャビネットの仕上げ材と芯材を変更し、次にエッジバンドを変更します。
- デザインでキャビネットの背板、天板、底板、側板を設定する各キャビネットパネルを個別に設定し、サイズ、素材、エッジバンド、照明、金物を必要な構造に合わせます。
- 複数のユニットに3 mmの隙間を適用する複数のユニットに、片側1.5 mmの縮小と3 mmの扉の隙間を一度に設定します。
- 壁付きユニットの高さの計算方法タイル張り、幅木、キャビネット、御影石の厚みの合計が実際に何を測るのか、また壁付きユニットの床からの高さがどこから決まるのかを説明します。
- 設定変更前に追加したユニットを更新する配置済みのキャビネットに、扉、本体、背板の芯材を再適用し、現在の設定に合わせます。
- ワードローブの内部、引き出しセット、ミラーを追加する縦仕切り、棚、ハンギングアクセサリー、引き出しセット、扉ミラーを追加して、ワードローブの内部を完成させます。
- キャビネットとコーナーユニットに構造スタイルを適用する構造スタイルは、キャビネット用とコーナーユニット用で別々に定義されることを学びます。
- システムを編集して、扉付きキャビネットを引き出しとバスケット付きに変更する扉を取り外してシステムをカスタマイズし、一枚扉のキャビネットを籐かごと引き出し付きのユニットに変更します。その後、引き出しと仕切りを追加、削除、調整します。
- ロフトフレームとボックス部品を使ってワードローブのロフトを作成する扉システムの構造で開き方向を調整し、開き方向を切り替えます。
- 多数のキャビネットでダボ、ミニフィックス、PVC脚が欠けている場合の修正多数のキャビネットでダボ、ミニフィックス、PVC脚が欠けている場合は、適用されている構法でRemove All Connectorsがオンになっているか確認してください。
- 複数のキャビネットの展開図を生成し、仕上げを一括で変更するキャビネットの2D Drawingsを開いて複数のキャビネットを対象とした展開図を生成し、その後キャビネットをグループ選択して素材と仕上げを一度に変更します。
- キャビネットの構造が扉、引き出し、付属品にどのように分かれるかキャビネットの構造が扉、引き出し、付属品にどのように分かれるか、また扉システムと引き出しシステムが別々に設定される方法を学びます。
- キッチンのトールユニットの高さと奥行きの測定方法キッチンのトールユニットの高さと奥行きを測定する際に除外される部分について説明します。
- ワードローブの側パネルが床まで届く仕組みワードローブの側パネルが床まで全長にわたって伸びる仕組みと、前面の幅木用に切り欠きが設けられる理由をご説明します。
- 仕上げとエッジバンドの設定を開くには、キャビネットを選択してくださいキャビネットを選択してプロパティパネルを開き、Materials で仕上げ、背パネルの芯材、エッジバンドを設定します。
- 縦仕切りでキャビネットの空間を分割するAdd vertical partitionsで空間を分割し、幅を比率または明示的な値で設定します。
- キャビネットをプロファイル取っ手または取っ手なし扉に切り替えるデザイン中にキャビネットを通常の取っ手からプロファイル取っ手または取っ手なし扉へ直接変更できます。別途カタログや構造設定は不要です。
- 1台配置してコピー・整列し、キッチンレイアウトを作成する壁付きキャビネットまたはロフトを1台正しい位置に配置し、残りのユニットをコピーして整列させ、キッチンレイアウトを作成します。
- ワードローブの構造を手動で変更し、背面スカートをオフにするワードローブの構造を手動で変更し、引き戸式ワードローブの背面スカートをオフにして、ワードローブをカスタマイズします。
- 家具モデルライブラリからドレッサー、テレビ、トールユニットを配置する既成モデルまたはご自身のデザインを使ってドレッサー、テレビ、トールユニットを配置し、フィットするように調整します。
- キャビネットを配置前または配置後に回転するfurnishツールからキャビネットを配置し、配置前にスペースバーで回転するか、配置後に回転オプションで回転します。
- プロジェクトごとにキャビネットとワードローブの設定を行うデザインの設定メニューを開くと、アカウント全体の既定値ではなく、プロジェクト独自のキャビネットとワードローブの材質既定値を設定できます。
- 中央キャビネットの側面パネルの構造を理解する中央キャビネットの側面パネルが既定でどのように構成され、左右上下のパネルがどのように組み合わされるかを学びます。
- クイックアクセスパネルでキッチンキャビネットの高さを理解するキッチンキャビネットのクイックアクセスパネルに表示される高さが何を測っているのか、編集すると何が変わるのかを学びます。
- カタログからユニットを選んでドロップし、キャビネットを追加しますカタログを開き、ベースユニットのカテゴリを選んで必要な幅のキャビネットを選択し、レイアウトにドロップしてデザインを構築します。
- Add cabinets using FR enter and room templatesOpen the cabinet library with FR and enter, then place, rotate, resize and duplicate base or wall units.
- 空のキャ carcass からワードローブの内部を自分で構築するカタログからワードローブのオプションを配置し、棚と縦パネル、または既製の仕切り構成を使って内部を自分で構築します。
- キャビネットのサイズを変更し、材料カテゴリを理解するプロパティパネルでキャビネットのサイズを変更し、その材料がどのようにグループ化されているかを確認します。
- シャッターを追加する前に、ワードローブを主な仕切りに分割しますまずワードローブを主な仕切りに分割し、次に棚と縦仕切り用に細分化してから、カスタマイズした機構を備えたシャッターシステムを追加します。
- キャビネットモジュールの幅・高さ・奥行きの範囲がどのように適用されるか各キャビネットモジュールのサイズ設定ルールが最小・最大の幅、高さ、奥行きをどのように定め、デザイナーをその範囲内に保つかを説明します。
- 標準的なベースユニットの寸法の仕組みキッチンのモデリングで使用される標準的なベースユニットの奥行きと高さ、およびそれらの寸法に含まれないものを説明します。
- 平面図でキッチンユニットを移動・回転するキッチンユニットはMVコマンドまたは移動ツールで移動し、スペースキーで回転させて、壁に正しく配置します。
- 2Dビューと3Dビューでキャビネットを移動するキャビネットを上下に移動し、2Dビューまたは3Dビューで位置を変更します。
- 正しい位置に配置するため、キャビネットを平面図に配置しますキャビネットを平面図に配置すると、隣接するキャビネットにスナップします。スペースキーで回転できます。
- Repurpose a cabinet into another unit typeSwitch off unneeded panels, set the size and add internal divisions to turn a cabinet into a different type.
- ハイキャビネットの開き方向を切り替え、リフトアップ機構を設定するハイキャビネットの開き方向を切り替え、機構を単一のリフトアップ構成に設定します。
- Pricing Quotationでキャビネットと引き出しレールがどのように表示されるかを理解するベースユニット、ウォールユニット、トールユニットのキャビネットがどのようにラベル付けされ一覧表示されるか、また引き出しのレールが見積もりでどのように数えられ価格設定されるかを学びます。
- ワードローブに合わせて自動的にサイズが変わる、既製の内部構成を使用します。カスタマイズオプションからワードローブの内部構成を追加し、棚の高さを1つ調整すると、残りの棚のサイズが自動的に変わります。
- キャビネットパネル構法でワードローブの構造を設定するキャビネットパネル構法セクションを使用してワードローブの構造を設定し、縦パネルや引き出しなどの内部・外部部品を追加します。
- Align Dimensionの立面図における寸法単位立面図で、同じ方向に沿ってユニットのキャビネット本体、仕切り板、扉の端部と連続寸法を選びます。
- キャビネットタイプごとにビュー固有のレイヤーを使用して個別の平面図を生成するベースユニット、ウォールユニット、ロフトユニットが別々に印刷されるよう、キャビネットタイプごとに個別の平面図を作成します。
- 吊り戸棚用の吊り金具で壁付キャビネットを取り付ける壁付キャビネットを取り付けるには、金物倉庫の吊り戸棚用吊り金具を使用します。
- ワードローブの構造スタイルがキャーカスパラメータを保存する方法ワードローブユニットの構造スタイルが保持するキャーカスパラメータと、スタイルを更新したときにそれがワードローブに適用される方法を説明します。
- キャビネットの底板を側板の板厚分だけ内側にオフセットする底板を板厚1枚分上げて、側板の下ではなくキャビネット本体の内側に収まるようにします。
- Furnishと移動ツールでロフト収納ユニットを配置して移動しますキッチン家具からロフト収納ユニットを配置し、矢印オプションまたは移動ツールで移動します。必要に応じてボックス型ロフト収納の追加やサイズ変更も行えます。
- デフォルトのキャビネットの1mm縮小を理解するデフォルトでは、引き出しレベルの構造において、すべてのキャビネットが四辺すべてで1mm縮小される仕組みを学びます。
- シンクユニットのレールと巾木のオプションを理解するシンクユニットが上部と背面のレールでどのように構成されるか、またキャビネットの巾木オプションから巾木をオンまたはオフにする方法を学びます。
- 選択ツリーを使って、キャビネット、仕切り、扉、パネルのコントロールにアクセスしますキャビネットの部品を選択すると、その上の階層が表示され、必要なコントロールへ直接移動できます。
- ワンクリックで標準的なワードローブの内部構成を追加下部引き出しなどの標準構成を、手作業で作らずにワンクリックでワードローブに追加できます。
- 2つのキャビネットの間に縦型ゴラプロファイルを追加する両方のキャビネットを選択し、左側のプロパティメニューを開いて、その間に縦型ゴラプロファイルを追加します。
- 正しい階でファニッシュライブラリからキッチンユニットを追加するキッチンの階で作業しながらファニッシュライブラリからキッチンユニットを配置すると、正しい高さに配置されます。
- モジュール式のベースユニット、壁面ユニット、オープンユニットからテレビ台を組み立てるFurnishパネルを開き、多目的モジュール家具を選び、ユニットを組み合わせ、回転させ、配置してテレビ台を構成します。
- ベースユニットの幅、奥行き、高さを一括変更ベースユニットを選択し、幅、奥行き、高さの値を編集して、寸法を一括で変更します。
- キャビネットレベルでキャビネットの内部色を変更するキャビネットを選択し、キャビネットレベルに移動して内部色を設定すると、変更がキャビネットの内部に適用されます。
- construction フィールドと position フィールドでキャビネットロックを変更または再配置するキャビネットロックは独立したオブジェクトではなくキャビネットに属するため、3D で選択して position フィールドを調整することで再配置します。
- 複数選択で複数のユニットを一度に変更する変更を共有するユニットだけを選択し、それらすべてにまとめて適用します。
- 複数のウォールユニットの構造を一度に変更するコーナーユニットを除くすべてのウォールユニットを選択し、一括操作から一括構造を選んでまとめて変更します。
- 既存のキャビネットにのみ適用されるコネクターカードを複製するコネクターカードを複製して、既存のキャビネットにのみ適用される変更版を作成します。
- 2つのキャビネットを1つのユーザーコンポーネントに結合する2つの別々のキャビネットを、1つのユニットとして動作する1つのユーザーコンポーネントに結合します。
- ブラインドコーナーユニットを右開きまたは左開きに設定するブラインドコーナーユニットを右側または左側のオプションに設定し、正しく構成してください。
- Duplicate a placed wardrobe with Ctrl+C and Ctrl+VCopy a placed wardrobe unit and paste it into the remaining space, then drag units behind each other to adjust positioning.
- Edit connector 単一ユニットパネルカムモードでのキャビネットごとのカード間隔他のキャビネットに影響を与えず、1つのキャビネットのみのコネクターカード間隔を変更します。
- ワードローブの幅、高さ、奥行きを編集ワードローブの幅、高さ、奥行きを変更すると、内部レイアウトが自動的に調整されます。
- SUショートカットでSingle Unit CAM Modeを入力します制作デザインでSUキーボードショートカットを使用すると、パネルのSingle Unit CAM Modeを開けます。
- 多目的モジュラー家具からテレビ台とテレビ引き出しユニットを探す多目的モジュラー家具のセクションで、テレビ台とテレビ引き出しユニット(片開き扉または両開き扉、高さはショート、450、600)を探します。
- ハンギングセクション用のワードローブハンガーを探すハンギングセクションのパーティションレベル以下のアクセサリーとして、ワードローブハンガーを見つけます。ノンブランドのハンガーはすでにストアで利用できます。
- 許容範囲外のキャビネット幅を修正するEnter a cabinet width within the allowed limits so the system stops showing an error that the construction is invalid.
- 2Dのキャビネットレイアウトから3Dモデルを生成する2Dデザインビューでキャビネットを配置し、3Dに切り替えると、レイアウトから3Dモデルが自動的に生成されます。
- キャビネットの素材プロパティの設定方法キャビネットの素材プロパティは複数の個別のフィールドで設定し、扉の外装仕上げは通常、その他とは別に選択します。
- 1800 mm を超えるキャビネットがロフトユニットとして扱われる仕組みAuto Presentation テンプレートの最小高さと Loft detection スイッチによって、1800 mm を超えるキャビネットがロフトユニットと見なされるかどうかが決まる仕組みを説明します。
- キャビネットの最小・最大サイズ制限の仕組みキャビネットの幅、高さ、奥行きに最小・最大サイズ制限がどのように適用され、どこで設定されるかを説明します。
- admin portalで既存のキャビネット項目を管理・編集するadmin portalで既存のキャビネット項目を管理・編集します。
- キッチン家具ライブラリからウォールユニットとトールユニットを配置するキッチン家具ライブラリからウォールユニットまたはトールユニットを配置し、その寸法を調整します。配置オプションは他のキャビネットタイプと同じものを使用します。
- Y軸を使用して壁キャビネットの上にロフトを配置するロフトが壁ユニットの上に正しく収まるように、ロフトのY軸を壁キャビネットのY軸に600 mmを加えた値に設定します。
- SKU構造の変更後にキャッシュを更新し、キャビネットを差し替えるカタログのSKU構造を変更した後、キャッシュを更新し、design portal内のキャビネットを差し替えてください。
- キャビネットを回転させ、位置と回転を設定する選択したキャビネットはスペースキーまたは正確なY角度で回転させ、パネルの仕上げを回転させ、Position Yを底面高さと正しく照らし合わせて読み取ります。
- ユニット単位の変更がパネルにどのように反映されるかを確認するユニット単位の素材変更がいつパネルに反映されるか、また自動化ルールやリンクされたSKUがそれを上書きする方法を学びます。
- サイジングルールでキャビネットの最小サイズと最大サイズの制限を設定するソースモデルと管理ポータルでサイジングルールを設定し、キャビネットの寸法が許容範囲を超えないようにします。
- キャビネットまたはパーティションに外寸と内寸のサイズ制限ルールを設定するユニットの制限を外寸に適用するか内部の有効空間に適用するかを選択し、1ユニットずつ、または一括で適用します。
- 平面図でキャビネットのラベルを明確に表示する各キャビネットは平面図に番号ラベルを表示します。テキストが他の要素と重なる場合は、引き出し線付きのカスタムラベルを追加できます。
- キャビネット、ワードローブ、カスタムパネルのカテゴリを理解するInfurniaがユニットをキャビネット、ワードローブ、カスタムパネルの3つのカテゴリに分類する方法を学びます。
- FRショートカットでワードローブのデザインを作成するFRショートカットでワードローブのデザインを開始し、両開き扉を取り付け、内部のキャーカス要素を管理します。
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- キャビネットへの安定レールの追加、間隔調整、削除キャビネットのプロパティパネルから安定レールを追加すると、システムが底板と天板の間に均等な間隔で配置します。
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- キャビネット編集パネルのタブで設定を探す必要な設定にたどり着くには、Quick Access、Customize、Constructionの各タブと選択ツリーを使用します。
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- キャビネットがレベルにどのように整理されるかデザインモジュールのキャビネットは、キャビネット、パーティション、シャッターシステム、パネルの各レベルから構成され、各レベルには独自の設定があります。
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- 新規プロジェクトで使用される単位と精度について新規プロジェクトはミリメートル単位で、1 mm の精度で測定されます。
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs設定でユニットとパネルの注記を再割り当てする2つのモードのいずれかを使用して、出力内のユニットとパネルのラベルを再番号付けします。変更は元に戻せないため、最初に確認してください。
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- キャビネットを回転する前に選択してください回転してもバウンディングボックスから外れないよう、先にキャビネットを選択してください。
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- 壁ユニットの底面高さを床タイルの隙間より上に設定するベースユニットがゼロレベルより12 mm上に配置される理由と、壁ユニットの底面高さが標準の1450 mmより12 mm上に設定される理由を説明します。
- ブラインドコーナーユニットとダミーパネルの設定扉と扉でない前パネルの間にダミーパネルを入れたブラインドコーナーユニットを作成し、その奥行きを設定します。
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- 立面図でスケルトンモードを使ってキャビネット内部を表示する立面図でTurn on Skeleton modeを押すと、扉を非表示にしてキャビネットの内部間仕切りと胴体を表示し、直接寸法を記入できます。
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- シングルユニットモードでフィルターを使用し、干渉を自動的に解決するシングルユニットモードでは、干渉チェックを実行し、違反のみにフィルターをかけて、右下のオプションから解決することで干渉を解消できます。
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- パーティション レベルと引き出しセットでキャビネットに引き出しを追加するキャビネットのパーティション レベルからキャビネット内に引き出しを挿入し、高さを設定します。必要に応じて下に棚を追加します。
- キャビネットとワードローブの扉のデザインを保存して再利用するInfurniaで扉のデザインを保存し、modify shutter designからキャビネットとワードローブに適用します。
- ユニットに幅木を追加し、右側面に表示する木製以外の幅木をオンにし、キャーカス高さを正しく設定して、側面ごとに幅木の表示を有効にします。
- キャビネット全体または1つの仕切りに扉システムを追加するオープンキャビネット全体、または1つの仕切りだけに扉システムを追加します。
- ワードローブに内部引き出しを追加して設定する区画の高さを定義し、引き出しを内部タイプ・ボックスタイプに設定し、フィラーを扉の厚みに合わせることで、ワードローブに内部引き出しを追加します。
- Apply core and material changes to several units at onceUse bulk edit, group selection and common properties to change materials across many cabinets and wardrobes in one go.
- ユニットの巾木の種類と高さを設定するユニットごとに木製または木製以外の巾木を選択し、製作オプションから巾木の高さを設定します。
- Reference panel thickness in cabinet construction formulasReference a panel's thickness in a construction formula by picking the thickness parameter from the suggestions instead of typing raw numbers.
- キャビネットの両側のフィラーパネルを複製して変更するフィラーパネルを複製し、キャビネットの各側にそれぞれのフィラーが付くように変更します。
- キャビネット設定でキャビネットの幅木を設定するキャビネット設定でキャビネットの幅木のオプションを確認します。
- キャビネットの引き出しシステムの仕組み引き出しレベルで引き出しシステムを設定する方法を学びます。メカニズムの種類の選択や、引き出しごとに金物を組み合わせる方法も含みます。
- 1台のキャビネットの本体仕上げを変更するキャビネット単位で本体仕上げを変更すると、選択したキャビネットの本体パネルがすべてまとめて更新され、同じ種類の他のキャビネットには影響しません。
- キャビネットをコピー&ペーストして、同様のキャビネットをすばやく作成しますまず1つのキャビネットを完全に調整してから、コピー&ペーストします。これにより、各キャビネットを個別に調整するより速く、複数の同様のキャビネットを作成できます。
- キャビネット内のすべてのパネルに1本のエッジバンドを適用するキャビネットレベルでエッジバンドを追加すると、そのキャビネット内のすべてのパネルに適用されます。
- キッチンキャビネットの幅木がユニット全体の高さに与える影響キッチンキャビネットの約100 mmの幅木が、寸法に表示されるキャarcass高さに加算されてユニット全体の高さになる仕組みを説明します。
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- ドロップダウンの再利用オプションを使って、複数のキャビネット部品に仕上げを適用しますライブラリからキャビネットの仕上げを変更し、その同じ仕上げをドロップダウンから側板外部や側板内部などの他の部品に再利用します。
- キャビネットレベルで扉カラーを、パネルレベルでパネル仕上げを変更するキャビネット全体の扉カラーを設定し、個々のパネルの外装仕上げを設定します。
- キャビネット前面を越える引き出しを修正する外付け引き出しのDrawer Back Gapを確認して、引き出しがキャビネット前面を越えないようにします。
- ユニットから幅木を外すSkirting Visibilityの下の前幅木をオフにすると、ユニットの正面に幅木が表示されなくなります。
- キャビネットとアイランドキッチンに適した立面図を選択するキッチンのレイアウトに合った立面図の方法を選び、図面に寸法を追加します。
- 引戸ユニットで干渉する引き出し用フィラーを取り除く縦仕切りがあり、最左端または最右端に引き出しがある引戸ユニットでは、個別に干渉する側のフィラーをConstructionパネルから取り除きます。
- Work out usable drawer depth in a wardrobeSize a wardrobe drawer by subtracting the shelf reveal, back panel offset, back panel thickness and drawer fascia thickness from the cabinet depth.
- 壁付キャビネットの底板にテープライトとスポットライトを追加する壁付キャビネットの底板にテープライトとスポットライトを追加して、キャビネットを照らします。
- あらゆるユニットタイプに指掛け溝パネル取手を取り付ける指掛け溝取手を追加すると、溝が扉板に切り込まれ、キャビネット本体が調整されます。ベースユニット、トールユニット、引き出しのいずれでも同様です。
- ハードウェアルールでキャビネットごとに現場金物を取り付ける各キャビネットとワードローブに適切な金物を取り付けるハードウェアルールを作成し、ルールを整理して有効化し、ヒンジを設定します。
- 複数のキャビネットの取っ手をまとめて変更するキャビネットを複数選択し、プロパティパネルの'modify handle'オプションで取っ手をまとめて変更します。
- ユニット構成でワードローブの扉タイプを選択する手動でモデリングする代わりに、ユニット構成で利用可能な扉タイプから必要な扉の配置を選択してください。
- パーティションとワードローブ全体の棚の見付けを管理する棚の見付けが入れ子のパーティションにどのように適用されるか、また複数のワードローブに一度に適用する方法を理解します。
- 単一ユニットの構造からパネルを削除するコンポーネント定義に触れずに、選択したキャビネットのみで底板や背板などのパネルをオフにします。
- 引き出しユニットの引き出し側面の縮小と前板の拡張を設定する3 Drawer Unit で、引き出し自身のパネルの縮小と拡張を調整して、前板のサイズと形状を変更します。
- 立面設定でシャッター方向、ユニット、棚の注記の表示を切り替える立面設定でシャッター方向、ユニット注記、棚注記をオンまたはオフにして、表示される立面注記を制御します。
- ワードローブの独立した仕切りを個別に操作する分割されたワードローブの各仕切りを個別に選択すると、1つの区画にだけ扉を取り付けたり、他の区画に影響を与えずに棚を変更したりできます。
- キャビネットレベルで水平カスタムパネルを追加して回転させるキャビネットレベルのカスタムパネルを使ってキャビネットに天板パネルを追加し、次に水平カスタムパネルを追加して任意の場所に配置します。
- 引き戸式ワードローブに引き出しセットを追加するデザイン内の引き戸式ワードローブに引き出しセットを設定します。
- ユニットの両側のAdd drawersまず縦パネルを追加し、次に両側に引き出しを追加します。これにより、ユニットの両側に引き出しを配置できます。
- キャビネットゾーン内に仕切りとガラスを追加するキャビネットゾーン内の空きスペースに仕切りを追加して、キャビネット内部を均等に分割します。
- キャビネットに扉システムを適用する開き戸、引き戸、跳ね上げの扉システムから選び、カスタマイズタブでキャビネットに適用します。
- Modify Countertopで複数のユニットに1つのカウンタートップを適用する複数のキャビネットを選択し、ポップアップでカウンタートップの厚さと素材をまとめて設定します。
- ラミネート無垢材を使用してカウンター天板とキャビネットの素材を変更するカウンター天板を変更し、変更を適用して素材の変更を確定します。
- 複数のユニットの取っ手と素材を一度に変更する複数のユニットをまとめて選択し、change material / interchange コントロールで仕上げを一度に差し替えます。
- コネクターカードを編集して、デザイン全体と今後のキャビネットを変更します元のコネクターを編集すると、デザイン全体と今後のキャビネットが変更されます。
- パネルの寸法を固定してユニットとともにサイズ変更されないようにするパネルの長さ、奥行き、高さを固定値に設定すると、キャビネットやワードローブのサイズを変更してもそのパネルのサイズは変わりません。
- キャビネットの高さに応じてヒンジの数と位置がどのように変わるかキャビネットの高さ範囲に応じて、ハードウェアルールがヒンジの数と配置をどのように設定し、高さの変更時に自動で更新するかを学びます。
- キャビネットにカスタムパネルを配置するカタログから、またはAdd Custom Panelでカスタムパネルを追加し、破線の輪郭に合わせてクリックすると確定します。
- Set end panel depth to carcass level for open unitsStop the end panel at carcass level on a top unit that has no shutter so it aligns with the carcass.
- グローバル設定で、キャビネットとワードローブのプロジェクト基準を設定する芯材、仕上げ、扉、取っ手をプロジェクト単位で一度設定すると、その後追加するすべてのキャビネットとワードローブはその基準が既定値になります。
- ブラインドコーナーキャビネットの扉幅を設定するブラインドコーナーキャビネットの扉幅が、キャビネットの幅・奥行き・高さと並んでどこに表示されるかを確認します。
- 区画を理解し、キャビネット内に棚板、パネル、引き出しを追加するInfurnia における区画とは何かを理解し、区画レベルで棚板、縦パネル、引き出しを追加します。
- 壁付きキャビネットにはベース用プロファイルではなく、壁用ゴラプロファイルを使用してください。壁付きキャビネットにゴラプロファイルを追加する場合は、壁用ゴラプロファイルを選択してください。ベース用プロファイルは壁付きキャビネットには適していません。
- Why skirting and pelmet options depend on base or wall unitsLearn how a cabinet's mounting plane sets it as a base or wall unit and which skirting, pelmet, cornice and rail options that unlocks.
- constructionでユニット内にパラメトリックなカスタムパネルを追加するユニット内に水平な天板パネルを追加し、そのサイズと位置をパラメトリックな数式で制御します。
- キッチン家具カタログからベースユニット、ウォールユニット、トールユニットを追加しますInsert / Furnish のキッチン家具にあるベースユニット、ウォールユニット、トールユニットにアクセスしやすくするため、部屋をキッチンとしてマークします。
- キャビネットの構造に側面化粧板を追加または削除する選択したユニットのキャビネット構造設定で、左右の側面化粧板を追加または削除します。
- ワードローブの構造で巾木の高さと扉システムを調整するワードローブと標準キャビネットの巾木の高さまたは扉システムは、ワードローブ構造オプションの3番目のタブから変更します。
- キャビネット全体の幅から本体の幅を計算するキャビネット全体の幅から本体パネルの厚みを2回差し引いて、本体の幅を算出します。
- キャビネットの完成高さを計算するキャビネットの高さ、幅木の高さ、天板の厚さを合計して、要素を揃えるための全高さを求めます。
- Change countertop material via selection tree or unitChange a countertop's material by selecting the unit or using the selection tree, then choosing a subcategory and a specific material or colour.
- 単一ユニットCAMモードでパネル間の接続を確認するキャビネットのパネル間のすべての接続シナリオ、それぞれが使用するコネクターカード、実際のドリルを確認できます。
- admin portalでキャビネットに適用されるハードウェアルールを確認するキャビネットに適用されるハードウェアルールを探し、その条件と追加されるハードウェアを確認します。
- 配置するユニットタイプに合った設定グループを選択してください配置するユニットタイプに合った設定グループを選択してください。ベースユニット、ウォールユニット、ロフト、多目的ユニットにはキャビネット設定が適用され、ワードローブにはワードローブ設定が適用されます。
- キャビネットからカスタム立面図または部分立面図を作成する特定のキャビネットから立面図を開始し、カスタム立面図または部分立面図を作成します。
- 縦型ゴラハンドルが2つのユニット間でどのように共有されるか縦型ゴラハンドルが隣接する2つのユニットをどのようにつなぎ、両方の側面パネルにどのように凹みを設けるか、またそれを取り外すとどうなるかをご覧ください。
- カウンター天板が表示されるベースユニットの高さに与える影響ベースユニットにカウンター天板を追加または削除しても、そのユニットに表示されるキャーカス高さが変わらない理由を説明します。
- キャビネットの下にカスタムパネルが表示される方法カスタムパネルを追加する場所に応じて、どのキャビネットの下に表示されるかを確認します。
- パネルの寸法がエクステンションとキャビネット調整によってどのように決まるかパネルの総厚が芯材と仕上げ材からどのように計算されるか、また、その計算がプレラミネート芯材とポストラミネート芯材でどのように異なるかを学びます。
- キャビネットに内外装仕上げ材をリンクする仕上げ材のプロパティで外装仕上げ材と内装仕上げ材をリンクして、キャビネットに仕上げを適用します。
- ユニットに露出した側面パネルを設定するパネルはユニットレベルの既定値として設定できないため、ユニットをパネルレベルで開き、そのパネルを露出パネルに変更してください。
- キャビネットを配置する前に、キャビネット本体の芯材と背板の材質の既定値を設定しますキャビネット単位の設定でキャビネット本体の芯材と背板の芯材を選択すると、新しいキャビネットはその材質で追加されます。
- ゴラおよびGプロファイルのキャビネットの天板のサイズを設定するゴラプロファイルでは天板が後方へ少しオフセットされ、Gプロファイルではキャーカスと同じサイズに保たれる仕組みを学びます。
- 角度付きキャビネット形状にはカスタムパネルを使用する標準のキャビネットパネルを回転させる代わりに、別のカスタムパネルを使用して、角度付きまたは非標準のキャビネット形状を作成します。
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- ワードローブの下に下部支持パネルを追加する下部支持パネルの枚数と高さを設定し、幕板部分でキャビネット底面の下に均等に立つようにします。
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- キャビネットに適切な左または右の側面パネルを選択するユニットの扉に向かった状態で左右が決まることに注意して、キャビネットに左または右の側面パネルを追加します。
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- 自動化ルールがユニットごとに実行され再適用される仕組み自動化ルールがユニットごとにどのように評価され、実行のたびにリセットされて再適用されるか、またどのユニットとパネルがスキップされるかを説明します。
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3Dビューでユニットを分離し、QCの対象を1つの部屋に限定する壁に邪魔されずにユニットを間近で確認し、その部屋専用の作業スコープを設定して、その部屋だけのQCを実行します。
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
その他のガイド 10
すべて表示(10)
- 一括編集ストラクチャーで施工・製造設定を適用する一括編集ストラクチャーオプションを使用して、キャビネットとワードローブに施工・製造の構成設定を適用します。
- 管理者ポータルのルールまたは手動でコネクターを追加するadmin portalでルールを定義して、一致するインポート済みキャビネットにそのルールのコネクターが自動的に付くようにするか、手動で追加することで、コネクターを追加できます。
- ゴラとプロファイルの配置キャビネットのモデリングでゴラとプロファイルをどこに適用するか、また両方を同じキャビネットに表示する方法を学びます。
- construction customizeからハンギングレールを追加するワードローブにハンギングレールを追加するには、上部のconstruction customizationを開き、ハンギングレールのオプションを選択して、カタログから選びます。
- クイックアクセス、カスタマイズ、構造から選択します通常の変更でも要素の追加でも、行いたい変更に合ったキャビネットのカスタマイズメニューを選択してください。
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- スケジュール、複合BOQ、スケジュールテンプレートを理解するスケジュールベースの出力が非表示要素やワークスコープ除外要素をどのように扱うか、キャビネット複合BOQの印刷方法、スケジュールの保存とエクスポート方法について説明します。
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.