કેબિનેટ અને મોડ્યુલર યુનિટ
માર્ગદર્શિકાઓ: 298
- કેબિનેટની પહોળાઈ, ઊંડાઈ અને ઊંચાઈમાં શું સમાવેશ નથી થતો તે સમજોજાણો કે શટર, કાઉન્ટરટોપ અને સ્કર્ટિંગ જેવા કયા ભાગો દાખલ કરેલા માપથી અલગ ઉમેરવામાં આવે છે.
- કેબિનેટ બાંધણી, સ્કર્ટિંગ, કાઉન્ટરટોપ અને કાર્કાસ પેનલ કસ્ટમાઇઝ કરોપસંદ કરેલા કેબિનેટ પર customize ટૅબ ખોલીને તેની બાંધણી, સ્કર્ટિંગ, કાઉન્ટરટોપ અને કાર્કાસ પેનલ સેટ કરો.
- ઊંચા યુનિટને ઘન નીચેના અને કાચના ઉપરના શટરમાં વિભાજિત કરોઉપરના શટરની મિકેનિઝમ અને પેનલના કોર મટીરિયલ સેટ કરીને ઘન નીચેના શટર અને કાચના ઉપરના શટર સાથેનું મિશ્ર ઊંચું યુનિટ બનાવો.
- વોરડ્રોબ અને કિચન કેબિનેટની ઊંચાઈની સરખામણી કરોજુઓ કે વોરડ્રોબની ઊંચાઈમાં સ્કર્ટિંગ કેવી રીતે સમાયેલું છે, જ્યારે કિચન કેબિનેટની ઊંચાઈ ફક્ત કાર્કાસ બોક્સ છે.
- ડિફોલ્ટ કેબિનેટ બાંધકામ પેરામીટર્સ તપાસોLearn the default values Infurnia uses for back panel grooving, shutter reduction, shelf reveal, back panel offset and base cabinet tops.
- કસ્ટમ પેનલ અને પેનલ ડિઝાઇન એડિટ સાથે વળેલું કેબિનેટ બનાવોકેબિનેટ સ્તરે કસ્ટમ પેનલ ઉમેરીને, કાર્કાસ પેરામીટરથી તેનું માપ સેટ કરીને અને તેના ઓફસેટ સમાયોજિત કરીને તે યોગ્ય રીતે બેસે તેમ કરીને વળેલું કેબિનેટ બનાવો.
- શેલ્ફ, ડ્રોઅર અને હેંગર રોડ સાથે વોર્ડરોબનું આંતરિક ભાગ બનાવોવોર્ડરોબનું આંતરિક ભાગ બનાવવા માટે યોગ્ય ક્રમમાં શેલ્ફ, ડ્રોઅર, વર્ટિકલ, હેંગર રોડ અને પુલ-આઉટ હેંગર રોડ ઉમેરો.
- પાર્ટિશન, શેલ્ફ અને ડ્રોઅર સિસ્ટમનો ઉપયોગ કરીને વોર્ડરોબની અંદરની રચના બનાવોવોર્ડરોબના પાર્ટિશનની અંદર Add shelves, ડ્રોઅર સિસ્ટમ અને બાંધકામ વિકલ્પો ઉમેરીને તેની અંદરની રચના બનાવો.
- Convert a standard wardrobe to sliding by replacing shuttersTurn a standard wardrobe into a sliding wardrobe by deleting its existing shutters and adding a new shutter system configured as two-door or three-door sliding.
- એડમિન ટૅબ દ્વારા કૅબિનેટનું કોર મટીરિયલ બદલોએડમિન ટૅબમાંથી કૅબિનેટ કે કોર્નર યુનિટનું કોર મટીરિયલ અપડેટ કરો અને સેટિંગ્સ કન્ફર્મ કરો, જેથી ફેરફાર પસંદ કરેલા યુનિટ પર લાગુ થાય.
- કેબિનેટ-સ્તરે શટર અને કાર્કસ ફિનિશ અને કોર સેટ કરોપ્રોપર્ટીઝ પેનલમાંથી શટર અને કાર્કસ ફિનિશ અને કોર મટીરિયલ પસંદ કરો, જેથી વારસાગત શટર કેબિનેટને અનુસરે.
- Change Materials દ્વારા કેબિનેટના ફિનિશ, કોર મટીરિયલ અને એજબેન્ડ બદલોChange Materials નો ઉપયોગ કરીને પહેલા કેબિનેટના ફિનિશ અને કોર મટીરિયલ બદલો, પછી તેના એજબેન્ડ બદલો.
- ડિઝાઇનમાં કેબિનેટના પાછળ, ઉપર, નીચે અને બાજુના પેનલ કન્ફિગર કરોદરેક કેબિનેટ પેનલ અલગથી કન્ફિગર કરો જેથી તેનું માપ, મટીરિયલ, એજ બેન્ડ, લાઇટિંગ અને હાર્ડવેર તમને જરૂરી બાંધણી સાથે મેળ ખાય.
- એકથી વધુ યુનિટમાં 3 mmનું ગેપ લાગુ કરોએકસાથે ઘણા યુનિટ પર દરેક બાજુ 1.5 mmનો ઘટાડો અને 3 mmનું શટર ગેપ સેટ કરો.
- વોલ યુનિટની ઊંચાઈ કેવી રીતે ગણવામાં આવે છેટાઇલિંગ, સ્કર્ટિંગ, કેબિનેટ અને ગ્રેનાઇટની જાડાઈનો સરવાળો ખરેખર શું માપે છે અને ફ્લોરથી વોલ યુનિટની ઊંચાઈ ક્યાંથી આવે છે તે જાણો.
- પસંદગી બદલાય તે પહેલાં ઉમેરાયેલા યુનિટ અપડેટ કરોપહેલેથી મૂકેલા કેબિનેટ પર શટર, કાર્કાસ અને બેક-પેનલ કોર મટીરિયલ ફરીથી લાગુ કરો, જેથી તે વર્તમાન પસંદગીઓ સાથે મેળ ખાય.
- વોર્ડરોબના આંતરિક ભાગ, ડ્રોઅર સેટ અને મિરર ઉમેરોવર્ટિકલ પાર્ટિશન, શેલ્ફ, લટકાવવાની એક્સેસરીઝ, ડ્રોઅર સેટ અને શટર મિરર ઉમેરીને વોર્ડરોબનો આંતરિક ભાગ પૂર્ણ કરો.
- કેબિનેટ અને કોર્નર યુનિટ પર કન્સ્ટ્રક્શન સ્ટાઇલ લાગુ કરોજાણો કે કન્સ્ટ્રક્શન સ્ટાઇલ કેબિનેટ માટે અને કોર્નર યુનિટ માટે અલગ રીતે વ્યાખ્યાયિત કરવામાં આવે છે.
- સિસ્ટમમાં ફેરફાર કરીને શટર કેબિનેટને ડ્રોઅર્સ અને બાસ્કેટમાં રૂપાંતરિત કરોશટર દૂર કરીને અને સિસ્ટમને કસ્ટમાઇઝ કરીને સિંગલ-શટર કેબિનેટને વિકર બાસ્કેટ અને ડ્રોઅર યુનિટમાં ફેરવો, પછી ડ્રોઅર્સ અને પાર્ટિશન ઉમેરો, દૂર કરો અને સમાયોજિત કરો.
- Create a wardrobe loft using loft frame and box componentsAdjust the opening direction via shutter system construction and toggle opening direction.
- ઘણા કેબિનેટમાં ખૂટતા ડોવેલ, મિનીફિક્સ અથવા PVC પગ ઠીક કરોજો ઘણા કેબિનેટમાં ડોવેલ, મિનીફિક્સ અથવા PVC પગ ખૂટતા હોય, તો લાગુ કરેલી કન્સ્ટ્રક્શન શૈલીમાં Remove All Connectors ચાલુ છે કે નહીં તે તપાસો.
- Generate multi-cabinet elevations and change finishes in bulkOpen a cabinet's 2D Drawings to generate elevations covering several cabinets, then group-select cabinets to change their materials and finishes in one action.
- કેબિનેટનું સ્ટ્રક્ચર શટર, ડ્રોઅર અને એક્સેસરીઝમાં કેવી રીતે વિભાજિત થાય છેકેબિનેટનું સ્ટ્રક્ચર શટર, ડ્રોઅર અને એક્સેસરીઝમાં કેવી રીતે વિભાજિત થાય છે અને શટર તથા ડ્રોઅર સિસ્ટમ અલગથી કેવી રીતે ગોઠવાય છે તે જાણો.
- રસોડાના ટોલ યુનિટની ઊંચાઈ અને ઊંડાઈ કેવી રીતે માપવામાં આવે છેજાણો કે રસોડાના ટોલ યુનિટની ઊંચાઈ અને ઊંડાઈ માપતી વખતે તેના કયા ભાગો બાકાત રાખવામાં આવે છે.
- વોર્ડરોબના સાઇડ પેનલ કેવી રીતે ફ્લોર સુધી પહોંચે છેવોર્ડરોબના સાઇડ પેનલ આખી લંબાઈમાં ફ્લોર સુધી કેવી રીતે જાય છે અને આગળના સ્કર્ટિંગ માટે કટઆઉટ કેમ બનાવવામાં આવે છે તે જાણો.
- ફિનિશ અને એજ-બેન્ડ સેટિંગ્સ ખોલવા માટે કેબિનેટ પસંદ કરોકેબિનેટ પસંદ કરીને તેનું પ્રોપર્ટીઝ પેનલ ખોલો, પછી Materials હેઠળ તેના ફિનિશ, બેક પેનલ કોર અને એજ બેન્ડ સેટ કરો.
- ઊભા પાર્ટિશન વડે કેબિનેટની જગ્યાઓ વિભાજિત કરોજગ્યાને વિભાજિત કરવા અને તેમની પહોળાઈ ગુણોત્તર કે સ્પષ્ટ મૂલ્યો દ્વારા સેટ કરવા Add vertical partitions.
- કેબિનેટને પ્રોફાઇલ હેન્ડલ અથવા હેન્ડલ વગરના દરવાજામાં બદલોડિઝાઇન દરમિયાન સીધું જ કેબિનેટને સામાન્ય હેન્ડલમાંથી પ્રોફાઇલ હેન્ડલ અથવા હેન્ડલ વગરના દરવાજામાં બદલો, કોઈ અલગ કેટલોગ કે કન્સ્ટ્રક્શન સેટઅપ વગર.
- એક યુનિટ મૂકીને, પછી કોપી અને એલાઇન કરીને કિચન લેઆઉટ બનાવોએક wall unit અથવા loft યોગ્ય જગ્યાએ મૂકો, પછી બાકીના યુનિટ કોપી કરીને એલાઇન કરો અને તમારું કિચન લેઆઉટ બનાવો.
- વોર્ડરોબનું બાંધકામ જાતે બદલો અને પાછળની સ્કર્ટિંગ બંધ કરોસ્લાઇડિંગ વોર્ડરોબ માટે તેનું બાંધકામ જાતે બદલીને અને પાછળની સ્કર્ટિંગ બંધ કરીને વોર્ડરોબને કસ્ટમાઇઝ કરો.
- ફર્નિચર મોડેલ લાઇબ્રેરીમાંથી ડ્રેસર, ટીવી અને ટોલ યુનિટ મૂકોપહેલેથી બનેલા મોડેલો અથવા તમારી પોતાની ડિઝાઇન વાપરીને ડ્રેસર, ટીવી અને ટોલ યુનિટ મૂકો, પછી ફિટ થાય તે મુજબ તેમને ગોઠવો.
- કેબિનેટ મૂકતા પહેલાં અથવા પછી તેને ફેરવોફર્નિશ ટૂલમાંથી કેબિનેટ મૂકો અને મૂકતા પહેલાં સ્પેસ બાર વડે અથવા પછી rotate વિકલ્પ વડે તેને ફેરવો.
- દરેક પ્રોજેક્ટ માટે કેબિનેટ અને વોર્ડરોબ પ્રાધાન્યતાઓ સેટ કરોપ્રોજેક્ટને એકાઉન્ટ-વ્યાપી પ્રાધાન્યતાઓને બદલે પોતાની કેબિનેટ અને વોર્ડરોબ મટીરિયલ ડિફોલ્ટ આપવા માટે ડિઝાઇનનું પ્રાધાન્યતા મેનુ ખોલો.
- સેન્ટર કેબિનેટના સાઇડ પેનલની બનાવટ સમજોજાણો કે સેન્ટર કેબિનેટના સાઇડ પેનલ ડિફોલ્ટ રીતે કેવી રીતે બને છે અને ડાબું, જમણું, ઉપરનું અને નીચેનું પેનલ એકબીજા સાથે કેવી રીતે જોડાય છે.
- ક્વિક એક્સેસ પેનલમાં કિચન કેબિનેટની ઊંચાઈ સમજોકિચન કેબિનેટની ક્વિક એક્સેસ પેનલમાં દર્શાવેલી ઊંચાઈ શું માપે છે અને તેને એડિટ કરવાથી શું બદલાય છે તે જાણો.
- કેટલોગમાંથી યુનિટ પસંદ કરીને અને ડ્રોપ કરીને કેબિનેટ ઉમેરોકેટલોગ ખોલો, બેઝ યુનિટ કેટેગરી પસંદ કરો અને જરૂરી પહોળાઈનું કેબિનેટ પસંદ કરો, પછી તમારી ડિઝાઇન બનાવવા માટે તેને લેઆઉટમાં ડ્રોપ કરો.
- Add cabinets using FR enter and room templatesOpen the cabinet library with FR and enter, then place, rotate, resize and duplicate base or wall units.
- ખાલી કાર્કાસમાંથી વોર્ડરોબનું આંતરિક ભાગ જાતે બનાવોકેટલોગમાંથી વોર્ડરોબ વિકલ્પ મૂકો અને શેલ્ફ તથા ઊભા પેનલ અથવા તૈયાર પાર્ટિશન ગોઠવણી વાપરીને તેનું આંતરિક ભાગ જાતે બનાવો.
- કેબિનેટનું માપ બદલો અને મટીરિયલ કેટેગરી સમજોપ્રોપર્ટીઝ પેનલમાંથી કેબિનેટનું માપ બદલો અને તેના મટીરિયલ કેવી રીતે વર્ગીકૃત થયેલા છે તે જાણો.
- શટર ઉમેરતા પહેલાં વોર્ડરોબને મુખ્ય પાર્ટિશનમાં વિભાજિત કરોપહેલાં વોર્ડરોબને મુખ્ય પાર્ટિશનમાં વિભાજિત કરો, પછી શેલ્ફ અને વર્ટિકલ માટે તેમને ઉપવિભાજિત કરો, અને ત્યારબાદ કસ્ટમાઇઝ્ડ મિકેનિઝમ સાથે શટર સિસ્ટમ ઉમેરો.
- કેબિનેટ મોડ્યુલની પહોળાઈ, ઊંચાઈ અને ઊંડાઈની શ્રેણીઓ કેવી રીતે લાગુ થાય છેજાણો કે દરેક કેબિનેટ મોડ્યુલનો માપન નિયમ ન્યૂનતમ અને મહત્તમ પહોળાઈ, ઊંચાઈ અને ઊંડાઈ કેવી રીતે નક્કી કરે છે અને ડિઝાઇનરોને તે મર્યાદામાં કેવી રીતે રાખે છે.
- પ્રમાણભૂત બેઝ યુનિટના પરિમાણો કેવી રીતે કામ કરે છેરસોડાના મોડેલિંગમાં વપરાતી પ્રમાણભૂત બેઝ યુનિટની ઊંડાઈ અને ઊંચાઈ જાણો અને તે માપો શું છોડી દે છે તે જાણો.
- ફ્લોર પ્લાનમાં કિચન યુનિટ ખસેડો અને ફેરવોMV કમાન્ડ અથવા move tool વડે ખસેડીને અને spacebar વડે ફેરવીને કિચન યુનિટને દીવાલો પર યોગ્ય રીતે ગોઠવો.
- 2D અને 3D વ્યૂમાં કેબિનેટ ખસેડોકેબિનેટને ઉપર અને નીચે ખસેડો અને 2D વ્યૂ અથવા 3D વ્યૂમાં તેને ફરીથી ગોઠવો.
- યોગ્ય સ્થિતિ માટે ફ્લોર પ્લાનમાં કેબિનેટ મૂકોકેબિનેટને ફ્લોર પ્લાનમાં એવી રીતે મૂકો કે તે નજીકની કેબિનેટ સાથે સ્નેપ થાય, અને સ્પેસ બાર વડે તેમને ફેરવો.
- કેબિનેટને બીજા યુનિટ પ્રકારમાં ફેરવોબિનજરૂરી પેનલ બંધ કરો, માપ સેટ કરો અને આંતરિક વિભાજન ઉમેરો, જેથી કેબિનેટને બીજા પ્રકારમાં ફેરવી શકાય.
- ઊંચા યુનિટ પર ખુલવાની દિશા ટૉગલ કરો અને લિફ્ટ-અપ મિકેનિઝમ સેટ કરોઊંચા યુનિટની ખુલવાની દિશા ટૉગલ કરો અને તેનું મિકેનિઝમ સિંગલ લિફ્ટ-અપ ગોઠવણી પર સેટ કરો.
- કેબિનેટ અને ડ્રોઅર ચેનલ Pricing Quotation માં કેવી રીતે દેખાય છે તે સમજોBase Unit, Wall Unit અને Tall Unit કેબિનેટ કેવી રીતે લેબલ થાય છે અને સૂચિબદ્ધ થાય છે, અને ડ્રોઅરની ચેનલ ક્વોટેશનમાં કેવી રીતે ગણાય છે અને ભાવ મુકાય છે તે જાણો.
- Use pre-made internal configurations that auto-resize to the wardrobeAdd internal wardrobe configurations through the customize option and adjust one shelf height to let the remaining shelves resize automatically.
- કાર્કસ પેનલ બાંધણી સાથે વોર્ડરોબનું સ્ટ્રક્ચર ગોઠવોવોર્ડરોબનું સ્ટ્રક્ચર ગોઠવવા અને ઊભી પેનલ તથા ડ્રોઅર જેવા આંતરિક અને બાહ્ય ઘટકો ઉમેરવા માટે કાર્કસ પેનલ બાંધણી વિભાગનો ઉપયોગ કરો.
- Align Dimension સાથે એલિવેશનમાં માપના એકમોએલિવેશનમાં એક જ દિશામાં યુનિટના કાર્કસ, પાર્ટિશન અને શટરને તેમની કિનારીઓ અને ચેઇન માપ દ્વારા પસંદ કરો.
- દરેક કેબિનેટ પ્રકાર માટે વ્યૂ-વિશિષ્ટ લેયર્સનો ઉપયોગ કરીને અલગ ફ્લોર પ્લાન બનાવોદરેક કેબિનેટ પ્રકારને તેનો પોતાનો પ્લાન આપો જેથી બેઝ, વોલ અને લોફ્ટ યુનિટ અલગ રીતે પ્રિન્ટ થાય.
- વોલ કેબિનેટને વોલ કેબિનેટ હેંગિંગ બ્રેકેટ સાથે લટકાવોવોલ કેબિનેટ લટકાવવા માટે હાર્ડવેર વેરહાઉસમાંથી વોલ કેબિનેટ હેંગિંગ બ્રેકેટનો ઉપયોગ કરો.
- How wardrobe construction style stores carcass parametersLearn which carcass parameters a wardrobe unit construction style holds and how updating the style applies them to the wardrobe.
- કાર્કસ પેનલની જાડાઈ વાપરીને કેબિનેટના નીચેના પેનલને અંદર તરફ ઓફસેટ કરોનીચેના પેનલને એક પેનલ જાડાઈ જેટલું ઉપર લાવો, જેથી તે બાજુના પેનલની નીચે રહેવાને બદલે કાર્કસની અંદર બેસે.
- Furnish અને move tool દ્વારા લોફ્ટ યુનિટ મૂકો અને ખસેડોKitchen Furniture માંથી લોફ્ટ યુનિટ મૂકો, તેમને arrow વિકલ્પો અથવા move tool થી ખસેડો, અને જરૂર મુજબ બોક્સ લોફ્ટ ઉમેરો કે તેમનું માપ બદલો.
- ડિફોલ્ટ 1 mm કેબિનેટ રિડક્શન સમજોજાણો કે ડ્રોઅર-લેવલ કન્સ્ટ્રક્શન હેઠળ દરેક કેબિનેટ ડિફોલ્ટ રૂપે ચારેય બાજુથી 1 mm કેવી રીતે ઘટે છે.
- સિંક યુનિટ રેલ અને સ્કર્ટિંગ વિકલ્પો સમજોસિંક યુનિટ ટોપ અને બેક રેલ સાથે કેવી રીતે બને છે અને કેબિનેટ સ્કર્ટિંગ વિકલ્પોમાંથી સ્કર્ટિંગ ચાલુ કે બંધ કેવી રીતે કરવું તે શીખો.
- કેબિનેટ, પાર્ટિશન, શટર અને પેનલ કંટ્રોલ સુધી પહોંચવા માટે સિલેક્શન ટ્રીનો ઉપયોગ કરોતેની ઉપરના સ્તરો જોવા અને તમને જોઈતા કંટ્રોલ પર સીધા જવા માટે કેબિનેટનો કોઈ ભાગ પસંદ કરો.
- Add a standard wardrobe internal configuration with one clickAdd a standard configuration such as a bottom drawer to a wardrobe with a single click instead of building it manually.
- બે કેબિનેટ વચ્ચે વર્ટિકલ ગોલા પ્રોફાઇલ ઉમેરોબંને કેબિનેટ પસંદ કરો અને તેમની વચ્ચે વર્ટિકલ ગોલા પ્રોફાઇલ ઉમેરવા માટે ડાબી બાજુનું properties મેનૂ ખોલો.
- યોગ્ય લેવલ પર furnish લાઇબ્રેરીમાંથી કિચન યુનિટ ઉમેરોકિચન લેવલ પર કામ કરતી વખતે furnish લાઇબ્રેરીમાંથી કિચન યુનિટ મૂકો, જેથી તે યોગ્ય ઊંચાઈ પર આવે.
- મોડ્યુલર બેઝ, વોલ અને ઓપન યુનિટમાંથી ટીવી યુનિટ બનાવોFurnish પેનલ ખોલો, બહુઉપયોગી મોડ્યુલર ફર્નિચર પસંદ કરો, અને ટીવી યુનિટ બનાવવા માટે યુનિટને જોડો, ફેરવો અને ગોઠવો.
- બેઝ યુનિટમાંથી પહોળાઈ, ઊંડાઈ અને ઊંચાઈ એકસાથે બદલોબેઝ યુનિટ પસંદ કરો અને તેમનાં માપ એકસાથે બદલવા માટે પહોળાઈ, ઊંડાઈ અને ઊંચાઈની કિંમતો સંપાદિત કરો.
- કેબિનેટ સ્તરે કેબિનેટનો આંતરિક રંગ બદલોએક કેબિનેટ પસંદ કરો, કેબિનેટ સ્તરે જાઓ અને તેનો આંતરિક રંગ સેટ કરો, જેથી ફેરફાર કેબિનેટના આંતરિક ભાગો પર લાગુ પડે.
- કન્સ્ટ્રક્શન અને પોઝિશન ફીલ્ડ્સ દ્વારા કેબિનેટ લોક બદલો અથવા તેની સ્થિતિ બદલોકેબિનેટ લોકની સ્થિતિ બદલવા માટે તેને 3D માં પસંદ કરો અને તેના પોઝિશન ફીલ્ડ્સ સમાવો, કારણ કે લોક સ્વતંત્ર ઑબ્જેક્ટ ન હોતું કેબિનેટનો ભાગ છે.
- મલ્ટી-સિલેક્શન વડે એક સાથે ઘણા યુનિટ બદલોફક્ત એ જ યુનિટ પસંદ કરો જેમાં એક જ ફેરફાર થવો જોઈએ, પછી તે ફેરફાર એકસાથે તે બધા પર લાગુ કરો.
- એકસાથે ઘણા વોલ યુનિટનું સ્ટ્રક્ચર બદલોખૂણાના યુનિટ સિવાયના બધા વોલ યુનિટ પસંદ કરો, પછી બલ્ક એક્શન વાપરો અને તેમને એકસાથે બદલવા માટે બલ્ક સ્ટ્રક્ચર પસંદ કરો.
- ફક્ત હાલના કેબિનેટ માટે કનેક્ટર કાર્ડનું ક્લોન બનાવોફક્ત હાલના કેબિનેટ પર લાગુ પડે એવી સુધારેલી આવૃત્તિ બનાવવા માટે કનેક્ટર કાર્ડનું ક્લોન બનાવો.
- બે કેબિનેટને એક જ વપરાશકર્તા ઘટકમાં જોડોબે અલગ કેબિનેટને એક જ વપરાશકર્તા ઘટકમાં જોડો, જે એક જ એકમ તરીકે વર્તે.
- બ્લાઇન્ડ કોર્નર યુનિટને જમણી બાજુ અથવા ડાબી બાજુ તરીકે ગોઠવોબ્લાઇન્ડ કોર્નર યુનિટને જમણી બાજુ અથવા ડાબી બાજુના વિકલ્પ પર સેટ કરો જેથી તે યોગ્ય રીતે ગોઠવાય.
- Ctrl+C અને Ctrl+V વડે મૂકેલા વોર્ડરોબની નકલ બનાવોમૂકેલા વોર્ડરોબ યુનિટની નકલ કરો અને તેને બાકીની જગ્યામાં પેસ્ટ કરો, પછી સ્થિતિ સમાવવા માટે યુનિટને એકબીજાની પાછળ ખેંચો.
- Edit connector card spacing per cabinet in single unit panel cam modeChange the connector card spacing for one cabinet only, without affecting any other cabinet.
- વોર્ડરોબની પહોળાઈ, ઊંચાઈ અને ઊંડાઈ સંપાદિત કરોવોર્ડરોબની પહોળાઈ, ઊંચાઈ અને ઊંડાઈ બદલો અને આંતરિક ગોઠવણી આપમેળે સમાયોજિત થવા દો.
- SU શોર્ટકટ વડે Single Unit CAM Mode દાખલ કરોપેનલ માટે Single Unit CAM Mode ખોલવા ઉત્પાદન ડિઝાઇનમાં SU કીબોર્ડ શોર્ટકટ વાપરો.
- મલ્ટી-પર્પઝ મોડ્યુલર ફર્નિચરમાં TV બેઝ અને TV ડ્રોઅર યુનિટ શોધોમલ્ટી-પર્પઝ મોડ્યુલર ફર્નિચર વિભાગ હેઠળ TV બેઝ અને TV ડ્રોઅર યુનિટ શોધો — સિંગલ કે ડબલ ડોર અને શોર્ટ, 450 કે 600 ઊંચાઈમાં.
- લટકતા વિભાગ માટે વોર્ડરોબ હેંગર શોધોલટકતા વિભાગમાં પાર્ટિશન સ્તર હેઠળ એક્સેસરી તરીકે વોર્ડરોબ હેંગર શોધો, જ્યાં સ્ટોરમાં બિન-બ્રાન્ડેડ હેંગર પહેલેથી ઉપલબ્ધ છે.
- મંજૂર મર્યાદાની બહારની કેબિનેટ પહોળાઈ સુધારોમંજૂર મર્યાદામાં કેબિનેટ પહોળાઈ દાખલ કરો જેથી સિસ્ટમ બાંધણી અમાન્ય હોવાની ભૂલ બતાવવાનું બંધ કરે.
- તમારા 2D કેબિનેટ લેઆઉટમાંથી 3D મોડેલ જનરેટ કરો2D ડિઝાઇન વ્યૂમાં કેબિનેટ મૂકો અને 3D પર સ્વિચ કરો, જેથી તમારા લેઆઉટમાંથી 3D મોડેલ આપમેળે જનરેટ થાય.
- કેબિનેટની મટીરિયલ પ્રોપર્ટીઝ કેવી રીતે સેટ થાય છેકેબિનેટની મટીરિયલ પ્રોપર્ટીઝ અલગ-અલગ ઘણાં ફીલ્ડ્સ દ્વારા સેટ થાય છે, અને શટરનું એક્સટર્નલ ફિનિશ સામાન્ય રીતે બાકીનાથી અલગ રીતે પસંદ કરવામાં આવે છે.
- 1800 mm થી ઉપરના કેબિનેટને લોફ્ટ યુનિટ તરીકે કેવી રીતે ગણવામાં આવે છેAuto Presentation ટેમ્પલેટની ન્યૂનતમ એલિવેશન અને Loft detection સ્વિચ 1800 mm થી ઉપરના કેબિનેટને લોફ્ટ યુનિટ તરીકે ગણવો કે નહીં તે કેવી રીતે નક્કી કરે છે તે જાણો.
- કેબિનેટના લઘુત્તમ અને મહત્તમ માપની મર્યાદા કેવી રીતે કામ કરે છેજાણો કે કેબિનેટની પહોળાઈ, ઊંચાઈ અને ઊંડાઈ પર લઘુત્તમ અને મહત્તમ માપની મર્યાદા કેવી રીતે લાગુ પડે છે અને તે ક્યાં ગોઠવાય છે.
- admin portal માં હાલના કેબિનેટ આઇટમ્સનું સંચાલન અને સંપાદન કરોadmin portal માં હાલના કેબિનેટ આઇટમ્સનું સંચાલન અને સંપાદન કરો.
- રસોડાના ફર્નિચર લાઇબ્રેરીમાંથી વોલ યુનિટ અને ટોલ યુનિટ મૂકોરસોડાના ફર્નિચર લાઇબ્રેરીમાંથી વોલ યુનિટ અથવા ટોલ યુનિટ મૂકો અને તેના પરિમાણો ગોઠવો, અન્ય કેબિનેટ પ્રકારોની જેમ તે જ પ્લેસમેન્ટ વિકલ્પોનો ઉપયોગ કરીને.
- Y-axis નો ઉપયોગ કરીને લોફ્ટને વોલ કેબિનેટની ઉપર ગોઠવોલોફ્ટ યોગ્ય રીતે વોલ યુનિટની ઉપર બેસે તે માટે લોફ્ટની Y-axis ને વોલ કેબિનેટની Y-axis વત્તા 600 mm પર સેટ કરો.
- SKU સંરચનામાં ફેરફાર કર્યા પછી કેશ રિફ્રેશ કરો અને કેબિનેટ બદલોકેટલોગમાં SKU સંરચનામાં ફેરફાર કર્યા પછી, કેશ રિફ્રેશ કરો અને design portal માં કેબિનેટ બદલો.
- કેબિનેટને ફેરવો અને તેની સ્થિતિ અને પરિભ્રમણ સેટ કરોપસંદ કરેલ કેબિનેટને સ્પેસ બાર અથવા ચોક્કસ Y કોણ વડે ફેરવો, પેનલનું ફિનિશ ફેરવો, અને Position Y ને નીચેની ઊંચાઈ સામે યોગ્ય રીતે વાંચો.
- યુનિટ-સ્તરના ફેરફારો પેનલ સુધી કેવી રીતે પ્રસરે છે તે જુઓયુનિટ-સ્તરનો મટીરિયલ ફેરફાર ક્યારે પેનલ સુધી પહોંચે છે અને ઓટોમેશન નિયમો તથા લિંક્ડ SKU તેને કેવી રીતે ઓવરરાઇડ કરી શકે છે તે જાણો.
- સાઇઝિંગ નિયમો દ્વારા કેબિનેટના લઘુત્તમ અને મહત્તમ સાઇઝની મર્યાદા સેટ કરોસ્રોત મોડેલ અને એડમિન પોર્ટલમાં સાઇઝિંગ નિયમો ગોઠવો જેથી કેબિનેટના પરિમાણો મંજૂર મર્યાદાથી આગળ ન જાય.
- કેબિનેટ અથવા પાર્ટિશન પર બહારની અને અંદરની મર્યાદાઓ માટે સાઇઝિંગ નિયમો સેટ કરોયુનિટની મર્યાદાઓ તેના બહારના પરિમાણો પર લાગુ થાય કે તેની અંદરની ખાલી જગ્યા પર તે પસંદ કરો, અને તેમને એક સમયે એક યુનિટ પર અથવા એકસાથે લાગુ કરો.
- ફ્લોર પ્લાનમાં કેબિનેટ લેબલ સ્પષ્ટ રીતે બતાવોફ્લોર પ્લાનમાં દરેક કેબિનેટ તેનું નંબર લેબલ બતાવે છે, અને જ્યારે ટેક્સ્ટ અન્ય ઘટકો સાથે ઓવરલેપ થાય ત્યારે તમે કસ્ટમ લીડર-શૈલી લેબલ ઉમેરી શકો છો.
- કેબિનેટ, વોરડ્રોબ અને કસ્ટમ પેનલ શ્રેણીઓ સમજોજાણો કે Infurnia યુનિટને ત્રણ અલગ શ્રેણીઓમાં કેવી રીતે ગોઠવે છે: કેબિનેટ, વોરડ્રોબ અને કસ્ટમ પેનલ.
- વોર્ડરોબ ડિઝાઇન બનાવવા માટે FR શોર્ટકટ વાપરોFR શોર્ટકટથી વોર્ડરોબ ડિઝાઇન શરૂ કરો, પછી ડબલ સ્વિંગ શટર મૂકો અને કાર્કસના આંતરિક ઘટકો સંભાળો.
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- કેબિનેટ પર સ્થિરતા રેલ ઉમેરો, અંતર રાખો અને દૂર કરોકેબિનેટના પ્રોપર્ટી પેનલમાંથી સ્થિરતા રેલ ઉમેરો અને સિસ્ટમને નીચેની અને ઉપરની પેનલ વચ્ચે તેમને સમાન અંતરે ગોઠવવા દો.
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- કેબિનેટ એડિટિંગ પેનલના ટૅબ્સમાં સેટિંગ્સ શોધોતમને જોઈતી સેટિંગ સુધી પહોંચવા માટે Quick Access, Customize અને Construction ટૅબ્સ તથા સિલેક્શન ટ્રીનો ઉપયોગ કરો.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- કેબિનેટને સ્તરોમાં કેવી રીતે ગોઠવવામાં આવે છેડિઝાઇન મોડ્યુલમાં કેબિનેટ કેબિનેટ, પાર્ટિશન, શટર સિસ્ટમ અને પેનલ સ્તરોમાંથી બનેલું હોય છે, અને દરેક સ્તરની પોતાની સેટિંગ્સ હોય છે.
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- નવા પ્રોજેક્ટ્સ કઈ એકમ અને ચોકસાઈ વાપરે છે તે જાણોનવા પ્રોજેક્ટ્સ મિલિમીટરમાં માપવામાં આવે છે, 1 mm સુધીની ચોકસાઈ સાથે.
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs settings માં unit અને panel annotations ફરી સોંપોબે મોડમાંથી એકનો ઉપયોગ કરીને તમારા outputs માં unit અને panel labels ને ફરી નંબર આપો; પહેલા પુષ્ટિ કરો કારણ કે આ ફેરફાર પાછો ફેરવી શકાતો નથી.
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- કેબિનેટને ફેરવતા પહેલાં તેને પસંદ કરોપહેલાં કેબિનેટ પસંદ કરો જેથી તેને ફેરવવાથી તે તેના બાઉન્ડિંગ બોક્સની બહાર ન જાય.
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- ફ્લોર ટાઇલ ગેપની ઉપર વોલ યુનિટની નીચેની ઊંચાઈ સેટ કરોજાણો કે બેઝ યુનિટ શા માટે ઝીરો લેવલથી 12 mm ઉપર બેસે છે, જેથી વોલ યુનિટની નીચેની ઊંચાઈ પ્રમાણભૂત 1450 mmથી 12 mm ઉપર સેટ થાય.
- બ્લાઇન્ડ કોર્નર યુનિટ અને ડમી પેનલ સેટ કરોશટર અને નોન-શટર ફ્રન્ટ પેનલ વચ્ચે ડમી પેનલ સાથે બ્લાઇન્ડ કોર્નર યુનિટ બનાવો અને તેની ઊંડાઈ સેટ કરો.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- એલિવેશન વ્યૂમાં Skeleton મોડ વડે કેબિનેટનો આંતરિક ભાગ બતાવોશટર છુપાવવા અને કેબિનેટના આંતરિક પાર્ટિશન અને કાર્કસ દેખાડવા માટે એલિવેશન વ્યૂમાં Turn on Skeleton mode કરો, જેથી તમે તેમને સીધા ડાયમેન્શન કરી શકો.
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- સિંગલ યુનિટ મોડમાં ફિલ્ટરનો ઉપયોગ કરો અને ટકરાવ આપોઆપ ઉકેલોકોલિઝન ડિટેક્શન ચલાવીને, ઉલ્લંઘનો માટે ફિલ્ટર કરીને અને જમણા-નીચેના વિકલ્પોમાંથી તેમને ઉકેલીને સિંગલ યુનિટ મોડમાં ટકરાવ ઉકેલો.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- પાર્ટિશન લેવલ અને ડ્રોઅર સેટ દ્વારા કેબિનેટમાં ડ્રોઅર ઉમેરોકેબિનેટના પાર્ટિશન લેવલ પરથી કેબિનેટની અંદર ડ્રોઅર દાખલ કરો, પછી તેની ઊંચાઈઓ સેટ કરો અને જરૂર હોય તો નીચે શેલ્ફ ઉમેરો.
- કેબિનેટ અને વોર્ડરોબ પર શટર ડિઝાઇન સાચવો અને ફરી વાપરોInfurnia માં શટર ડિઝાઇન સાચવો અને modify shutter design દ્વારા તેને કેબિનેટ અને વોર્ડરોબ પર લાગુ કરો.
- યુનિટમાં સ્કર્ટિંગ ઉમેરો અને તેને જમણી બાજુઓ પર બતાવોબિન-લાકડાનું સ્કર્ટિંગ ચાલુ કરો, કાર્કાસની ઊંચાઈ યોગ્ય રીતે સેટ કરો અને દરેક બાજુ માટે સ્કર્ટિંગ દૃશ્યતા સક્ષમ કરો.
- આખા કેબિનેટમાં અથવા એક જ પાર્ટિશનમાં શટર સિસ્ટમ ઉમેરોખુલ્લા કેબિનેટમાં આખા કેબિનેટ પર અથવા ફક્ત એક પાર્ટિશન પર શટર સિસ્ટમ ઉમેરો.
- Add and configure internal drawers in a wardrobeAdd an internal drawer to a wardrobe by defining the partition height, setting the drawer to internal and box type, and aligning fillers with the shutter thickness.
- એકસાથે ઘણા યુનિટમાં કોર અને મટીરિયલ ફેરફારો લાગુ કરોબલ્ક એડિટ, ગ્રુપ સિલેક્શન અને કોમન પ્રોપર્ટીઝનો ઉપયોગ કરીને એક જ વખતમાં ઘણા કેબિનેટ અને વોર્ડરોબમાં મટીરિયલ બદલો.
- યુનિટ પર સ્કર્ટિંગનો પ્રકાર અને ઊંચાઈ સેટ કરોદરેક યુનિટ માટે લાકડાનું કે બિન-લાકડાનું સ્કર્ટિંગ પસંદ કરો અને construction વિકલ્પોમાંથી સ્કર્ટિંગની ઊંચાઈ સેટ કરો.
- કેબિનેટ બાંધકામ ફોર્મ્યુલામાં પેનલની સંદર્ભ જાડાઈકાચા આંકડા ટાઇપ કરવાને બદલે સૂચનોમાંથી જાડાઈ પેરામીટર પસંદ કરીને બાંધકામ ફોર્મ્યુલામાં પેનલની જાડાઈનો સંદર્ભ લો.
- કેબિનેટની બંને બાજુઓ માટે ફિલર પેનલ ક્લોન કરો અને સંશોધિત કરોફિલર પેનલ ક્લોન કરો અને તેને એ રીતે સંશોધિત કરો કે કેબિનેટની દરેક બાજુને પોતાનું ફિલર મળે.
- કેબિનેટ સેટિંગ્સમાં કેબિનેટ સ્કર્ટિંગ ગોઠવોકેબિનેટ કન્ફિગરેશનમાં કેબિનેટ સ્કર્ટિંગ વિકલ્પો શોધો.
- કેબિનેટમાં ડ્રોઅર સિસ્ટમ કેવી રીતે કામ કરે છેડ્રોઅર સ્તરે ડ્રોઅર સિસ્ટમ કેવી રીતે ગોઠવાય છે તે શીખો, જેમાં મિકેનિઝમ પ્રકારો પસંદ કરવા અને દરેક ડ્રોઅર માટે હાર્ડવેર મિક્સ કરવાનો સમાવેશ થાય છે.
- એક કેબિનેટ માટે કાર્કસ ફિનિશ બદલોપસંદ કરેલા કેબિનેટના બધા કાર્કસ પેનલ એકસાથે અપડેટ કરવા માટે કેબિનેટ સ્તરે કાર્કસ ફિનિશ બદલો; તે જ પ્રકારના બીજા કેબિનેટ પર અસર થશે નહીં.
- Copy and paste a cabinet to create similar cabinets quicklyFully adjust one cabinet first, then copy and paste it to create multiple similar cabinets faster than adjusting each one individually.
- કેબિનેટના દરેક પેનલ પર એક એજ બેન્ડ લગાવોકેબિનેટ સ્તરે એજ બેન્ડ ઉમેરો જેથી તે તે કેબિનેટના દરેક પેનલ પર લાગુ થાય.
- રસોડાના કેબિનેટનું સ્કર્ટિંગ કુલ યુનિટની ઊંચાઈને કેવી રીતે અસર કરે છેજાણો કે રસોડાના કેબિનેટ પરનું આશરે 100 mm સ્કર્ટિંગ, ડાયમેન્શનમાં દર્શાવેલ કાર્કસની ઊંચાઈમાં ઉમેરાઈને કુલ યુનિટની ઊંચાઈ કેવી રીતે આપે છે.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- ડ્રોપડાઉન રીયુઝ વિકલ્પનો ઉપયોગ કરીને ઘણા કેબિનેટ ભાગો પર ફિનિશ લાગુ કરોલાઇબ્રેરીમાંથી કેબિનેટની ફિનિશ બદલો, પછી ડ્રોપડાઉન દ્વારા એ જ ફિનિશ કાર્કાસ એક્સટર્નલ અને કાર્કાસ ઇન્ટર્નલ જેવા અન્ય ભાગો પર ફરી વાપરો.
- કેબિનેટ સ્તરે શટરનો રંગ અને પેનલ સ્તરે પેનલ ફિનિશ બદલોઆખા કેબિનેટ માટે શટરનો રંગ અને અલગ પેનલ માટે બાહ્ય ફિનિશ સેટ કરો.
- કેબિનેટ ફ્રન્ટ ઓળંગતા ડ્રોઅરને ઠીક કરોબાહ્ય ડ્રોઅર પર Drawer Back Gap તપાસો જેથી ડ્રોઅર કેબિનેટ ફ્રન્ટ ઓળંગવાનું બંધ કરે.
- યુનિટમાંથી સ્કર્ટિંગ દૂર કરોSkirting Visibility હેઠળનું આગળનું સ્કર્ટિંગ બંધ કરો જેથી યુનિટ આગળના ભાગમાં સ્કર્ટિંગ બતાવે નહીં.
- કેબિનેટ અને આઇલેન્ડ કિચન માટે યોગ્ય એલિવેશન પસંદ કરોતમારા કિચન લેઆઉટ સાથે મેળ ખાતી એલિવેશન પદ્ધતિ પસંદ કરો, પછી ડ્રોઇંગમાં માપ ઉમેરો.
- સ્લાઇડિંગ શટરવાળા યુનિટમાં અથડાતું ડ્રોઅર ફિલર દૂર કરોઊભા પાર્ટિશન અને એકદમ ડાબી કે જમણી બાજુ ડ્રોઅરવાળા સ્લાઇડિંગ શટરવાળા યુનિટમાં, Construction પેનલમાંથી જે બાજુનું ફિલર અલગથી અથડાય તે દૂર કરો.
- વોર્ડરોબમાં વપરાયોગ્ય ડ્રોઅરની ઊંડાઈ ગણોકેબિનેટની ઊંડાઈમાંથી શેલ્ફ રિવીલ, બેક પેનલ ઓફસેટ, બેક પેનલની જાડાઈ અને ડ્રોઅર ફેસિયાની જાડાઈ બાદ કરીને વોર્ડરોબ ડ્રોઅરનું માપ નક્કી કરો.
- વોલ કેબિનેટના નીચેના પેનલમાં સ્ટ્રિપ લાઇટ અને સ્પોટલાઇટ ઉમેરોવોલ કેબિનેટને પ્રકાશિત કરવા માટે તેના નીચેના પેનલમાં સ્ટ્રિપ લાઇટ અને સ્પોટલાઇટ ઉમેરો.
- કોઈપણ યુનિટ પ્રકાર પર ફિંગર ગ્રૂવ પેનલ હેન્ડલ લગાવોફિંગર-ગ્રૂવ હેન્ડલ ઉમેરો જેથી તેનો ગ્રૂવ શટરમાં કાપવામાં આવે અને કાર્કસ એડજસ્ટ થાય, બેઝ યુનિટ, ટોલ યુનિટ અને ડ્રોઅર્સમાં એકસમાન.
- Attach site hardware per cabinet via hardware rulesCreate hardware rules that attach the right hardware to each cabinet and wardrobe, then clean up and activate the rule to set up hinges.
- એકસાથે ઘણા કેબિનેટ પર હેન્ડલ બદલોકેબિનેટ મલ્ટી-સિલેક્ટ કરો અને તેમના હેન્ડલ એકસાથે બદલવા માટે પ્રોપર્ટીઝ પેનલમાં 'modify handle' વિકલ્પ વાપરો.
- યુનિટ કન્ફિગરેશનમાં વોર્ડરોબ શટર પ્રકારો પસંદ કરોજાતે મોડેલિંગ કરવાને બદલે યુનિટ કન્ફિગરેશનમાં ઉપલબ્ધ શટર પ્રકારોમાંથી તમને જોઈતી શટર ગોઠવણી પસંદ કરો.
- પાર્ટિશન અને વોર્ડરોબમાં શેલ્ફ રિવીલ મેનેજ કરોશેલ્ફ રિવીલ નેસ્ટેડ પાર્ટિશન સુધી કેવી રીતે પહોંચે છે અને એકસાથે ઘણા વોર્ડરોબમાં તેને કેવી રીતે લાગુ કરવું તે સમજો.
- Remove a panel from a single unit's constructionTurn off a panel such as the bottom or back on the selected cabinet only, without touching the component definition.
- ડ્રોઅર યુનિટમાં ડ્રોઅર સાઇડ રિડક્શન અને ફેસિયા એક્સ્ટેન્શન સેટ કરો3 Drawer Unit માં ડ્રોઅરના ફેસિયાનું કદ અને આકાર બદલવા માટે તેના પોતાના પેનલ રિડક્શન અને એક્સ્ટેન્શન સમાવો.
- એલિવેશન પસંદગીઓમાં શટર દિશા, યુનિટ અને શેલ્ફ એનોટેશન ટૉગલ કરોએલિવેશન પસંદગીઓમાં શટર દિશાઓ, યુનિટ એનોટેશન અને શેલ્ફ એનોટેશન ચાલુ કે બંધ કરીને કયા એલિવેશન એનોટેશન દેખાય તે નિયંત્રિત કરો.
- વોરડ્રોબમાં અલગ પાર્ટિશન સાથે કામ કરોવિભાજિત વોરડ્રોબના દરેક પાર્ટિશનને અલગથી પસંદ કરો, જેથી તમે ફક્ત એક ઝોનમાં શટર ઉમેરી શકો અથવા બીજાને અસર કર્યા વિના તેના શેલ્ફ બદલી શકો.
- કેબિનેટ સ્તરે આડી કસ્ટમ પેનલ ઉમેરો અને તેને ફેરવોકેબિનેટ-સ્તરીય કસ્ટમ પેનલનો ઉપયોગ કરીને કેબિનેટમાં ટોપ પેનલ ઉમેરો, પછી આડી કસ્ટમ પેનલ ઉમેરો અને તેને ગમે ત્યાં મૂકો.
- સ્લાઇડિંગ વોર્ડરોબમાં ડ્રોઅર સેટ ઉમેરોતમારી ડિઝાઇનમાં સ્લાઇડિંગ વોર્ડરોબ માટે ડ્રોઅર સેટ ગોઠવો.
- એકમની બંને બાજુએ Add drawersપહેલા ઊભી પેનલ ઉમેરો, પછી દરેક બાજુએ ડ્રોઅર ઉમેરો જેથી ડ્રોઅર એકમની બંને બાજુએ બેસી શકે.
- Add partitions and glass inside a cabinet zoneSplit a cabinet interior equally by adding a partition in the empty space inside the cabinet zone.
- કેબિનેટ પર શટર સિસ્ટમ લાગુ કરોસ્વિંગ, સ્લાઇડિંગ અથવા લિફ્ટ-અપ શટર સિસ્ટમ પસંદ કરો અને customize ટૅબમાંથી તેને કેબિનેટ પર લાગુ કરો.
- Modify Countertop વડે એક કાઉન્ટરટોપ ઘણા યુનિટ પર લાગુ કરોઘણા કેબિનેટ પસંદ કરો અને એક જ પોપ-અપમાં તેમની કાઉન્ટરટોપ જાડાઈ અને મટીરિયલ સાથે સેટ કરો.
- લેમિનેટ સોલિડનો ઉપયોગ કરીને કાઉન્ટરટોપ અને કેબિનેટની સામગ્રી બદલોકાઉન્ટરટોપમાં ફેરફાર કરીને અને ફેરફારો લાગુ કરીને સામગ્રીના ફેરફારની પુષ્ટિ કરો.
- એકસાથે ઘણા યુનિટના હેન્ડલ અને મટીરિયલ બદલોઘણા યુનિટ એકસાથે પસંદ કરો અને change material / interchange કંટ્રોલ વડે એક જ ક્રિયામાં તેમના ફિનિશ બદલો.
- સમગ્ર ડિઝાઇન અને ભવિષ્યના કેબિનેટ બદલવા માટે કનેક્ટર કાર્ડ સંપાદિત કરોમૂળ કનેક્ટર સંપાદિત કરો જેથી સમગ્ર ડિઝાઇન અને ભવિષ્યના કેબિનેટ બદલાય.
- પેનલના માપને ફિક્સ કરો જેથી તે યુનિટ સાથે રીસાઇઝ થવાનું બંધ કરેપેનલની લંબાઈ, ઊંડાઈ કે ઊંચાઈને નિશ્ચિત મૂલ્ય પર સેટ કરો જેથી કેબિનેટ કે વોરડ્રોબ રીસાઇઝ કરવાથી તે પેનલનું માપ બદલાય નહીં.
- કેબિનેટની ઊંચાઈ સાથે હિન્જની સંખ્યા અને સ્થિતિ કેવી રીતે બદલાય છેહાર્ડવેર નિયમો કેબિનેટની ઊંચાઈની શ્રેણી પ્રમાણે હિન્જની સંખ્યા અને સ્થાન કેવી રીતે નક્કી કરે છે અને ઊંચાઈ બદલાય ત્યારે તેમને આપમેળે કેવી રીતે અપડેટ કરે છે તે જાણો.
- કેબિનેટમાં કસ્ટમ પેનલ મૂકોકૅટલોગમાંથી અથવા Add Custom Panel વડે કસ્ટમ પેનલ ઉમેરો, ડૅશવાળી રૂપરેખા અનુસરો અને તેને નિશ્ચિત કરવા ક્લિક કરો.
- ખુલ્લા યુનિટ માટે એન્ડ પેનલની ઊંડાઈ કાર્કસ સ્તર સુધી સેટ કરોજે ટોપ યુનિટમાં શટર નથી તેમાં એન્ડ પેનલને કાર્કસ સ્તર પર રોકો, જેથી તે કાર્કસ સાથે સંરેખિત થાય.
- ગ્લોબલ પ્રેફરન્સમાં કેબિનેટ અને વોર્ડરોબ માટે પ્રોજેક્ટ ધોરણો સેટ કરોમુખ્ય મટીરિયલ, ફિનિશ, શટર અને હેન્ડલ પ્રોજેક્ટ સ્તરે એક વાર સેટ કરો, જેથી પછીથી ઉમેરેલા દરેક કેબિનેટ અને વોર્ડરોબ માટે આ ધોરણો ડિફોલ્ટ થાય.
- બ્લાઇન્ડ કોર્નર કેબિનેટ પર શટરની પહોળાઈ સેટ કરોબ્લાઇન્ડ કોર્નર કેબિનેટના શટરની પહોળાઈ તેની કેબિનેટ પહોળાઈ, ઊંડાઈ અને ઊંચાઈ સાથે ક્યાં આવે છે તે જુઓ.
- પાર્ટિશન સમજો અને કેબિનેટની અંદર શેલ્ફ, પેનલ કે ડ્રોઅર ઉમેરોInfurniaમાં પાર્ટિશન શું છે તે જાણો અને પાર્ટિશન સ્તરે શેલ્ફ, ઊભી પેનલ કે ડ્રોઅર ઉમેરો.
- વોલ યુનિટ માટે વોલ ગોલા પ્રોફાઇલ વાપરો, બેઝ પ્રોફાઇલ નહીંવોલ કેબિનેટમાં ગોલા પ્રોફાઇલ ઉમેરતી વખતે વોલ ગોલા પ્રોફાઇલ પસંદ કરો, કારણ કે બેઝ પ્રોફાઇલ વોલ યુનિટ માટે યોગ્ય નથી.
- સ્કર્ટિંગ અને પેલ્મેટ વિકલ્પો બેઝ કે વોલ યુનિટ પર કેમ આધાર રાખે છેજાણો કે કેબિનેટનું માઉન્ટિંગ પ્લેન તેને બેઝ કે વોલ યુનિટ તરીકે કેવી રીતે નક્કી કરે છે અને તેનાથી કયા સ્કર્ટિંગ, પેલ્મેટ, કોર્નિસ અને રેલ વિકલ્પો મળે છે.
- કન્સ્ટ્રક્શન દ્વારા યુનિટની અંદર પેરામેટ્રિક કસ્ટમ પેનલ ઉમેરોયુનિટની અંદર આડી ટોપ પેનલ ઉમેરો અને તેનું માપ અને સ્થાન પેરામેટ્રિક ફોર્મ્યુલા વડે નિયંત્રિત કરો.
- રસોડાના ફર્નિચર કેટલોગમાંથી બેઝ, વોલ અને ટોલ યુનિટ ઉમેરોરૂમને રસોડા તરીકે ચિહ્નિત કરો જેથી Insert / Furnish હેઠળના રસોડાના ફર્નિચરમાં બેઝ, વોલ અને ટોલ યુનિટ સરળતાથી ઍક્સેસ થાય.
- કેબિનેટ બાંધણીમાંથી એન્ડ પેનલ ઉમેરો અથવા દૂર કરોપસંદ કરેલા યુનિટની કેબિનેટ બાંધણી સેટિંગ્સમાંથી તેના ડાબી કે જમણી એન્ડ પેનલ ઉમેરો અથવા દૂર કરો.
- Adjust skirting height and shutter system under wardrobe constructionChange the skirting height or shutter system for wardrobes and standard cabinets from the third tab under wardrobe construction options.
- કેબિનેટની એકંદર પહોળાઈમાંથી કાર્કસની પહોળાઈ ગણોકેબિનેટની એકંદર પહોળાઈ લઈને તેમાંથી કાર્કસ પેનલની જાડાઈ બમણી બાદ કરીને કાર્કસની પહોળાઈ શોધો.
- કેબિનેટની ફિનિશ્ડ એલિવેશનની ગણતરી કરોએલિમેન્ટ્સને સંરેખિત કરવા માટે કુલ એલિવેશન મેળવવા માટે કેબિનેટની ઊંચાઈ, સ્કર્ટિંગની ઊંચાઈ અને કાઉન્ટરટોપની જાડાઈ ઉમેરો.
- સિલેક્શન ટ્રી અથવા યુનિટ દ્વારા કાઉન્ટરટોપની સામગ્રી બદલોયુનિટ પસંદ કરીને અથવા સિલેક્શન ટ્રીનો ઉપયોગ કરીને, પછી ઉપશ્રેણી અને ચોક્કસ સામગ્રી કે રંગ પસંદ કરીને કાઉન્ટરટોપની સામગ્રી બદલો.
- સિંગલ યુનિટ કેમ મોડમાં પેનલ-થી-પેનલ કનેક્શન તપાસોકેબિનેટની પેનલ વચ્ચેના દરેક કનેક્શન સિનારિયો, દરેક કઈ કનેક્ટર કાર્ડ વાપરે છે અને વાસ્તવિક ડ્રિલ જુઓ.
- admin portal દ્વારા કેબિનેટ પર કયા હાર્ડવેર નિયમો લાગુ પડે છે તે તપાસોકેબિનેટ પર લાગુ પડતા હાર્ડવેર નિયમો શોધો અને તેમની શરતો તથા તે જે હાર્ડવેર ઉમેરે છે તે જુઓ.
- તમે મૂકો તે યુનિટ પ્રકાર માટે યોગ્ય પ્રેફરન્સ ગ્રુપ પસંદ કરોમૂકવામાં આવતા યુનિટ પ્રકાર સાથે મેળ ખાતું પ્રેફરન્સ ગ્રુપ પસંદ કરો, જેથી બેઝ યુનિટ, વોલ યુનિટ, લોફ્ટ અને મલ્ટી-પર્પઝ યુનિટ કેબિનેટ પ્રેફરન્સ વાપરે અને વોર્ડરોબ વોર્ડરોબ પ્રેફરન્સ વાપરે.
- કેબિનેટથી શરૂ કરીને કસ્ટમ અથવા સેક્શનલ એલિવેશન બનાવોકસ્ટમ અથવા સેક્શનલ એલિવેશન બનાવવા માટે ચોક્કસ કેબિનેટથી એલિવેશન શરૂ કરો.
- બે યુનિટ વચ્ચે વર્ટિકલ ગોલા હેન્ડલ કેવી રીતે શેર થાય છેજુઓ કે વર્ટિકલ ગોલા હેન્ડલ બે અડીને આવેલા યુનિટને કેવી રીતે જોડે છે, બંને સાઇડ પેનલમાં રિસેસ કેવી રીતે બને છે, અને તેને દૂર કરવામાં આવે ત્યારે શું થાય છે.
- કાઉન્ટરટોપ કેવી રીતે દર્શાવેલ બેઝ યુનિટની ઊંચાઈને અસર કરે છેજાણો કે બેઝ યુનિટ પર કાઉન્ટરટોપ ઉમેરવાથી કે દૂર કરવાથી તે યુનિટ માટે દર્શાવેલ કાર્કસની ઊંચાઈ કેમ કદી બદલાતી નથી.
- કેબિનેટ હેઠળ કસ્ટમ પેનલ કેવી રીતે સૂચિબદ્ધ થાય છેતમે કસ્ટમ પેનલ ક્યાં ઉમેરો છો તેના આધારે તે કઈ કેબિનેટ હેઠળ સૂચિબદ્ધ થાય છે તે જાણો.
- પેનલના પરિમાણો એક્સ્ટેન્શન અને કેબિનેટ એડજસ્ટમેન્ટ દ્વારા કેવી રીતે નક્કી થાય છેપેનલની કુલ જાડાઈ તેના કોર મટીરિયલ અને ફિનિશમાંથી કેવી રીતે ગણવામાં આવે છે, અને પ્રી-લેમિનેટેડ અને પોસ્ટ-લેમિનેટેડ કોર મટીરિયલ માટે એ ગણતરી કેવી રીતે અલગ પડે છે તે શીખો.
- કેબિનેટ સાથે આંતરિક અને બાહ્ય ફિનિશ સામગ્રીને લિંક કરોફિનિશ સામગ્રીના ગુણધર્મોમાં તેની બાહ્ય અને આંતરિક ફિનિશ સામગ્રીને લિંક કરીને કેબિનેટ પર ફિનિશ લગાવો.
- યુનિટ પર એક્સપોઝ્ડ સાઇડ પેનલ સેટ કરોયુનિટને પેનલ સ્તરે ખોલો અને પેનલને એક્સપોઝ્ડ પેનલમાં બદલો, કારણ કે તેને યુનિટ-સ્તરીય ડિફોલ્ટ તરીકે સેટ કરી શકાતું નથી.
- કેબિનેટ મૂકતા પહેલાં કાર્કસ કોર અને બેક-પેનલ મટીરિયલના ડિફોલ્ટ સેટ કરોકેબિનેટ-લેવલ પ્રેફરન્સમાં કાર્કસ કોર અને બેક-પેનલ કોર મટીરિયલ પસંદ કરો, જેથી નવી કેબિનેટ તેમની સાથે ઉમેરાય.
- ગોલા અને G-પ્રોફાઇલ કેબિનેટ માટે ટોપ પેનલનું માપ નક્કી કરોજાણો કે ગોલા પ્રોફાઇલ ટોપ પેનલને પાછળ તરફ કેવી રીતે ખસેડે છે, જ્યારે G-પ્રોફાઇલ તેને કાર્કસના માપમાં રાખે છે.
- કોણીય કેબિનેટ આકારો માટે કસ્ટમ પેનલનો ઉપયોગ કરોપ્રમાણભૂત કેબિનેટ પેનલને ફેરવવાને બદલે અલગ કસ્ટમ પેનલનો ઉપયોગ કરીને કોણીય અથવા બિન-પ્રમાણભૂત કેબિનેટ આકારો બનાવો.
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- વોરડ્રોબ નીચે નીચેના સપોર્ટ પેનલ ઉમેરોનીચેના સપોર્ટ પેનલની સંખ્યા અને ઊંચાઈ એવી રીતે સેટ કરો કે તેઓ પ્લિન્થ વિસ્તારમાં કેબિનેટના તળિયા નીચે સમાન રીતે ઊભા રહે.
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- કેબિનેટ માટે યોગ્ય ડાબી કે જમણી એન્ડ પેનલ પસંદ કરોકેબિનેટમાં ડાબી કે જમણી એન્ડ પેનલ ઉમેરો, એ જાણીને કે બાજુ યુનિટના શટર તરફ મુખ કરીને નક્કી થાય છે.
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- ઓટોમેશન નિયમો યુનિટ દીઠ કેવી રીતે ચાલે છે અને ફરી લાગુ થાય છેઓટોમેશન નિયમો યુનિટ દીઠ કેવી રીતે મૂલ્યાંકન પામે છે, દરેક રન પર ફરી સેટ અને લાગુ થાય છે, અને કયા યુનિટ અને પેનલ છોડી દેવાય છે તે જાણો.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3D વ્યૂમાં યુનિટને અલગ કરો અને QCને એક રૂમ સુધી મર્યાદિત કરોદીવાલો આડે ન આવે તેમ યુનિટને નજીકથી નિરીક્ષણ કરો, પછી તેને પોતાનું કાર્યક્ષેત્ર આપીને ફક્ત એક રૂમ માટે QC ચલાવો.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
વધુ માર્ગદર્શિકાઓ 10
બધું બતાવો (10)
- બલ્ક એડિટ સ્ટ્રક્ચર દ્વારા બાંધણી અને ઉત્પાદન સેટિંગ્સ લાગુ કરોબલ્ક એડિટ સ્ટ્રક્ચર વિકલ્પનો ઉપયોગ કરીને કેબિનેટ અને વોર્ડરોબ પર બાંધણી અને ઉત્પાદન રૂપરેખાંકન સેટિંગ્સ લાગુ કરો.
- એડમિન-પોર્ટલ નિયમો દ્વારા અથવા જાતે કનેક્ટર ઉમેરોadmin portal માં નિયમ વ્યાખ્યાયિત કરીને, જેથી મેળ ખાતા આયાત કરેલા કેબિનેટને નિયમના કનેક્ટર આપમેળે મળે, અથવા તેમને જાતે ઉમેરીને કનેક્ટર ઉમેરો.
- ગોલા અને પ્રોફાઇલ પ્લેસમેન્ટકેબિનેટ મોડેલિંગમાં ગોલા અને પ્રોફાઇલ ક્યાં લગાવવામાં આવે છે અને બંને એક જ કેબિનેટ પર કેવી રીતે દેખાઈ શકે છે તે શીખો.
- કન્સ્ટ્રક્શન કસ્ટમાઇઝ દ્વારા હેંગિંગ રૂટ ઉમેરોવોર્ડરોબમાં હેંગિંગ રૂટ ઉમેરવા માટે, ઉપરના ભાગમાં કન્સ્ટ્રક્શન કસ્ટમાઇઝેશન ખોલો, હેંગિંગ રૂટ વિકલ્પ પસંદ કરો અને કેટલોગમાંથી તેને પસંદ કરો.
- Quick Access, Customize અને Construction વચ્ચે પસંદ કરોતમે જે ફેરફાર કરવા માંગો છો તેને અનુરૂપ કેબિનેટ કસ્ટમાઇઝેશન મેનૂ પસંદ કરો, પછી તે સામાન્ય ફેરફાર હોય કે એલિમેન્ટ ઉમેરવાનો હોય.
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- Understand schedules, composite BOQ and schedule templatesLearn how schedule-based outputs treat hidden and workscope-excluded elements, how the cabinet composite BOQ prints, and how to save and export schedules.
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.