柜体和模块化单元
指南:298
- 了解柜体宽度、深度和高度不包含哪些部分了解门板、台面和踢脚板等部件是如何在输入尺寸之外单独添加的。
- 自定义柜体结构、踢脚板、台面和柜体板件在选中的柜体上打开自定义选项卡,设置其结构、踢脚板、台面和柜体板件。
- 将高柜拆分为实心底门板和玻璃顶门板通过设置顶门板机构和面板芯材,构建一个底部为实心门板、顶部为玻璃门板的混合高柜。
- Compare wardrobe and kitchen cabinet heightsSee how wardrobe height includes the skirting while kitchen cabinet height is the carcass box alone.
- 检查默认柜体结构参数了解 Infurnia 用于背板开槽、门板缩减量、层板内缩、背板偏移和地柜顶板的默认值。
- 创建带自定义面板的弧形柜并编辑面板设计在柜体层级添加自定义面板,依据柜体参数设定其尺寸,并调整其偏移量使其位置正确,从而构建弧形柜。
- 构建衣柜内部:层板、抽屉和挂衣杆按正确顺序添加层板、抽屉、竖板、挂衣杆和抽拉挂衣杆,构建衣柜内部。
- 使用隔板、层板和抽屉系统构建衣柜内部在衣柜的隔板内添加Add shelves、抽屉系统和结构选项,以构建其内部。
- 通过更换柜门将标准衣柜改为推拉门衣柜删除现有柜门并添加新的柜门系统,将其配置为两门或三门推拉式,即可将标准衣柜改为推拉门衣柜。
- 通过管理选项卡更改柜体芯材在管理选项卡中更新柜体或转角单元的芯材,并确认设置,使更改应用到所选单元。
- 设置柜体级别的门板和柜体饰面及芯材在属性面板中选择门板和柜体饰面以及芯材,使继承的门板跟随柜体。
- 通过Change Materials更改柜体的饰面、芯材和封边条先使用Change Materials更改柜体的饰面和芯材,然后更改其封边条。
- 在设计里配置柜体的背板、顶板、底板和侧板逐个配置每块柜体板件,使其尺寸、材质、封边、灯光和五金符合你所需的构造。
- 为多个单元应用 3 mm 缝隙一次为多个单元设置每侧 1.5 mm 的缩减量和 3 mm 的门板缝隙。
- 吊柜高度如何计算了解铺砖、踢脚板、柜体和花岗岩厚度之和实际测量的是什么,以及吊柜离地高度从何而来。
- 更新在偏好更改之前添加的单元对已放置的柜体重新应用门板、柜体和背板芯材,使其与当前偏好一致。
- 添加衣柜内部件、抽屉组和镜子通过添加竖向隔板、层板、挂衣配件、抽屉组和柜门镜子,完成衣柜内部配置。
- 为柜体和转角单元应用构造样式了解构造样式分别为柜体和转角单元单独定义。
- 通过编辑系统,将单门柜改为抽屉和拉篮拆除柜门并自定义系统,将单门柜改为藤编拉篮和抽屉单元,然后添加、移除和调整抽屉与隔板。
- 使用顶柜框架和柜体组件创建衣柜顶柜通过门板系统构造调整开启方向,并切换开启方向。
- 修复多个柜体中缺失的木榫、minifix 连接件或 PVC 支脚如果多个柜体都缺少木榫、minifix 连接件或 PVC 支脚,请检查所应用的构造方式是否已开启 Remove All Connectors。
- 批量生成多柜立面图并更改饰面打开柜体的2D Drawings,生成覆盖多个柜体的立面图,然后框选柜体,一次性更改它们的材料和饰面。
- 柜体结构如何拆分为门板、抽屉和配件了解柜体结构如何划分为门板、抽屉和配件,以及门板系统和抽屉系统如何分别配置。
- 厨房高柜的高度和深度如何测量了解测量厨房高柜的高度和深度时,哪些部分不计入。
- 衣柜侧板如何落地了解衣柜侧板如何通长落地,以及为何要为前踢脚板开缺口。
- 选择一个柜体,打开饰面和封边设置选择一个柜体以打开其属性面板,然后在材料下设置其饰面、背板芯材和封边。
- 用竖向隔板分隔柜体空间使用Add vertical partitions划分空间,并按比例或明确数值设置其宽度。
- 将柜体切换为型材拉手或无拉手门板在设计过程中直接更改柜体,从普通拉手改为型材拉手或无拉手门板,无需单独的产品目录或构造设置。
- 先放置一个单元,再复制并对齐,创建厨房布局将吊柜或顶柜放置在正确位置,然后复制并对齐其余单元,构建厨房布局。
- 手动更改衣柜结构并关闭背板踢脚通过手动更改结构并关闭推拉衣柜的背板踢脚,自定义衣柜。
- Place dresser, TV and tall units from the furniture model libraryPlace dresser, TV and tall units using pre-built models or your own design, then adjust them to fit.
- 在放置柜体之前或之后旋转它从 furnish 工具中放置柜体,放置前用空格键旋转,放置后用 rotate 选项旋转。
- 按项目设置柜体和衣柜偏好打开设计的偏好设置菜单,为项目设置独立的柜体和衣柜材料默认值,替代账户级默认值。
- 了解中间柜体侧板的构造了解中间柜体侧板默认如何构造,以及左、右、上、下侧板如何拼接在一起。
- 了解快捷访问面板中的橱柜高度了解厨房橱柜的快捷访问面板中显示的高度测量的是什么,以及编辑它会改变什么。
- 从目录中选取并拖放单元来添加柜体打开目录,选择地柜类别,选取所需宽度的柜体,然后将其拖放到布局中以构建您的设计。
- Add cabinets using FR enter and room templatesOpen the cabinet library with FR and enter, then place, rotate, resize and duplicate base or wall units.
- 从空柜体开始,自行搭建衣柜内部结构从目录中放置一个衣柜选项,然后使用搁板和竖向板件,或使用现成的分隔配置,自行搭建其内部结构。
- 更改柜体尺寸并了解材料类别在属性面板中调整柜体尺寸,并了解其材料的分组方式。
- 在添加柜门前,先将衣柜划分为主隔板先按主隔板将衣柜划分,再细分出层板和竖板,之后再添加柜门系统并自定义其机构。
- 如何强制执行柜体模块的宽度、高度和深度范围了解每个柜体模块的尺寸规则如何设定最小和最大宽度、高度和深度,并使设计师保持在这些限制之内。
- 标准底柜尺寸的工作方式了解厨房建模中使用的标准底柜深度和高度,以及这些测量值未包含的内容。
- 在平面图中移动和旋转厨房单元使用 MV 命令或移动工具移动厨房单元,并使用空格键旋转,将其正确放置在墙上。
- 在2D和3D视图中移动柜体在2D视图或3D视图中上下移动柜体并重新定位。
- 在平面图中放置柜体以正确定位在平面图中放置柜体,使其吸附到相邻柜体,并使用空格键旋转。
- 将柜体改作其他单元类型关闭不需要的板件,设置尺寸并添加内部分隔,即可将柜体改为其他类型。
- 切换高柜的开启方向,并设置上翻机构切换高柜的开启方向,并将其机构设置为单一上翻配置。
- 了解柜体和抽屉导轨在Pricing Quotation中的显示方式了解地柜、吊柜和高柜如何标注和列出,以及抽屉的导轨在报价中如何计数和计价。
- 使用可自动调整尺寸以适应衣柜的预制内部配置通过自定义选项添加衣柜内部配置,并调整一个层板的高度,让其余层板自动调整尺寸。
- 使用柜体板件构造配置衣柜结构使用“柜体板件构造”部分配置衣柜结构,并添加竖向板件和抽屉等内部与外部组件。
- 立面图中的尺寸单位(使用Align Dimension)在立面图中,按柜体、隔板和门板的边缘选取它们,并沿同一方向串联尺寸。
- 使用视图专属图层,按柜体类型生成单独的平面图为每种柜体类型提供各自的平面图,使地柜、吊柜和顶柜分别打印。
- Hang wall cabinets with wall cabinet hanging bracketsUse wall cabinet hanging brackets from the hardware warehouse to hang wall cabinets.
- 衣柜构造样式如何存储柜体参数Learn which carcass parameters a wardrobe unit construction style holds and how updating the style applies them to the wardrobe.
- 使用柜体板厚度将柜体底板向内偏移将底板抬高一个板厚,使其位于柜体内部,而不是位于侧板下方。
- 通过 Furnish 和移动工具放置并移动吊柜单元从 Kitchen Furniture 放置吊柜单元,使用箭头选项或移动工具移动它们,并按需添加或调整箱式吊柜的尺寸。
- 了解柜体默认 1 毫米缩减了解在抽屉级构造下,每个柜体默认四边各缩减 1 毫米的方式。
- 了解水槽柜的横撑与踢脚板选项了解水槽柜如何用顶部横撑和背部横撑构建,以及如何从柜体踢脚板选项中开启或关闭踢脚板。
- Use the selection tree to reach cabinet, partition, shutter and panel controlsSelect a cabinet part to expose the levels above it and jump straight to the controls you need.
- 一键为衣柜添加标准内部配置一键为衣柜添加底部抽屉等标准配置,无需手动搭建。
- 在两个柜体之间添加竖向gola型材选择两个柜体,然后打开左侧的属性菜单,在它们之间添加竖向gola型材。
- 在正确的楼层从家具库添加厨房单元在厨房楼层工作时从家具库放置厨房单元,使其落在正确的高度。
- 用模块化底柜、壁柜和开放柜组合电视柜打开 Furnish 面板,选择多用途模块化家具,然后组合、旋转并摆放各单元,以组成电视柜。
- 从底柜批量修改单元宽度、深度和高度选择底柜并编辑宽度、深度和高度值,即可批量更改其尺寸。
- 在柜体层级更改柜体内部颜色选择一个柜体,进入柜体层级并设置其内部颜色,使更改应用于柜体内部。
- 通过构造和位置字段更改或重新定位柜锁在 3D 中选择柜锁并调整其位置字段即可重新定位柜锁,因为锁属于柜体,而不是独立对象。
- 通过多选一次更改多个单元只选择应共享同一更改的单元,然后对它们一起应用该更改。
- 一次更改多个吊柜的结构选中除转角柜以外的所有吊柜,然后使用批量操作并选择批量结构,即可一起更改它们。
- 仅为现有柜体克隆连接件卡片克隆连接件卡片,以创建仅适用于现有柜体的修改版本。
- 将两个柜体合并为一个用户组件将两个独立的柜体合并为一个用户组件,使其作为一个整体运作。
- 将盲角柜配置为右手或左手将盲角柜设置为右手侧或左手侧选项,以便正确配置。
- 使用 Ctrl+C 和 Ctrl+V 复制已放置的衣柜复制已放置的衣柜单元,并将其粘贴到剩余空间中,然后拖动单元使其前后叠放,以调整位置。
- 单柜在单件面板偏心轮模式下的Edit connector卡片间距仅更改一个柜体的连接件卡片间距,不影响任何其他柜体。
- 编辑衣柜的宽度、高度和深度更改衣柜的宽度、高度和深度,内部布局会自动调整。
- 使用 SU 快捷键进入 Single Unit CAM Mode在生产设计中,使用 SU 键盘快捷键为面板打开 Single Unit CAM Mode。
- 在多用途模块化家具中找到电视柜底座和电视抽屉单元在多用途模块化家具部分下,找到电视柜底座和电视抽屉单元,可选单门或双门,以及矮款、450 或 600 高度。
- Find wardrobe hangers for a hanging sectionLocate wardrobe hangers as an accessory under the partition level in the hanging section, where non-branded hangers are already available in the store.
- 修复超出允许范围的柜体宽度请输入在允许范围内的柜体宽度,使系统不再显示结构无效的错误。
- 从2D柜体布局生成3D模型在2D设计视图中放置柜体,然后切换到3D,即可根据您的布局自动生成3D模型。
- 如何设置柜体的材料属性柜体的材料属性通过多个独立字段设置,门板外表面饰面通常与其他部分分开选择。
- 高于 1800 mm 的柜体如何被当作顶柜处理了解 Auto Presentation 模板的最低标高和 Loft detection 开关如何决定高于 1800 mm 的柜体是否算作顶柜。
- 柜体的最小和最大尺寸限制如何运作了解最小和最大尺寸限制如何应用于柜体的宽度、高度和深度,以及在哪里配置这些限制。
- Manage and edit existing cabinet items in the admin portalManage and edit existing cabinet items in the admin portal.
- 从厨房家具库中放置吊柜和高柜从厨房家具库中放置吊柜或高柜,并调整其尺寸,使用与其他柜体类型相同的放置选项。
- 使用 Y 轴将顶柜定位在吊柜上方将顶柜的 Y 轴设为吊柜的 Y 轴加 600 mm,使顶柜正确位于吊柜上方。
- SKU 结构变更后刷新缓存并替换柜体在目录中修改 SKU 结构后,请刷新缓存并替换 design portal 中的柜体。
- 旋转柜体并设置其位置和旋转用空格键或精确的 Y 角度旋转选中的柜体,旋转面板的饰面,并根据底部高度正确读取 Position Y。
- 了解单元级更改如何传递到板件了解单元级材料更改何时会传递到板件,以及自动化规则和关联 SKU 如何覆盖该更改。
- 通过尺寸规则设置柜体的最小和最大尺寸限制在源模型和管理门户中配置尺寸规则,使柜体尺寸不能超出允许的限制。
- 为柜体或隔板设置外部与内部限值的尺寸规则选择单元的限值适用于其外部尺寸还是内部净空,并逐个单元或批量应用这些限值。
- 在平面图中清晰显示柜体标签在平面图中,每个柜体都会显示其编号标签;当文字与其他元素重叠时,您可以添加自定义的引线式标签。
- 了解柜体、衣柜和自定义板件类别了解 Infurnia 如何将单元分为三个不同类别:柜体、衣柜和自定义板件。
- 使用 FR 快捷键创建衣柜设计使用 FR 快捷键开始衣柜设计,然后放置双开门板并管理内部柜体构件。
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- 在柜体上添加、调整间距和移除稳定横撑从柜体的属性面板添加稳定横撑,系统会在底板与顶板之间均匀分布它们。
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- 在柜体编辑面板的选项卡中查找设置使用 Quick Access、Customize 和 Construction 选项卡以及选择树,找到您需要的设置。
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- 柜体如何按层级组织设计模块中的柜体由柜体、隔板、门板系统和板件层级构成,每个层级都有自己的设置。
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- 了解新项目使用的单位和精度新项目以毫米为单位,精度为 1 mm。
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- 在 Outputs 设置中重新分配单元和面板标注使用两种模式之一重新编号输出中的单元和面板标签,请先确认,因为此更改无法撤销。
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- 旋转柜体前请先选择柜体请先选择柜体,以免旋转时将其移出边界框。
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- 将壁柜底部高度设置为高于地砖缝隙的位置了解为什么底柜位于零标高上方 12 mm,因此壁柜底部高度设置为标准 1450 mm 上方 12 mm。
- 设置盲角柜和假面板构建一个盲角柜,在门板和不可开启的前面板之间设置假面板,并设置其深度。
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- 在立面视图中用骨架模式显示柜体内部在立面视图中使用Turn on Skeleton mode隐藏门板,显示柜体的内部隔板和柜身,以便直接为其标注尺寸。
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- 在单柜模式下使用筛选并自动解决碰撞在单柜模式下,运行碰撞检测、筛选出违规项,并从右下角选项中解决它们,以此解决碰撞。
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- 通过隔板层级和抽屉组为柜体添加抽屉从柜体的隔板层级在柜体内部插入抽屉,然后设置其高度,如有需要可在下方添加层板。
- 在柜体和衣柜上保存并复用门板设计在 Infurnia 中保存门板设计,并通过 modify shutter design 将其应用到柜体和衣柜上。
- 为单元添加踢脚板,并在右侧面显示开启非木质踢脚板,正确设置柜体高度,并按侧面启用踢脚板可见性。
- 为整个柜体或单个隔板添加门板系统为整个开放柜体或仅为一个隔板添加门板系统。
- 在衣柜中添加并配置内部抽屉通过定义隔板高度、将抽屉设为内部抽屉并设置盒体类型,以及让填充条与门板厚度对齐,为衣柜添加内部抽屉。
- 一次性为多个单元应用芯材和材质更改使用批量编辑、组选择和通用属性,一次性更改多个柜体和衣柜的材质。
- 在单元上设置踢脚线类型和高度按单元选择木质或非木质踢脚线,并在构造选项中设置踢脚线高度。
- 在柜体构造公式中引用板件厚度在构造公式中引用板件厚度时,请从建议中选择厚度参数,而不要直接输入原始数字。
- 克隆并修改柜体两侧的填充板克隆填充板并加以修改,使柜体每一侧都有各自的填充板。
- 在柜体设置中配置柜体踢脚线在柜体配置中找到柜体踢脚线选项。
- 柜体中的抽屉系统如何运作了解如何在抽屉层级配置抽屉系统,包括选择机构类型以及为每个抽屉混合搭配五金件。
- 更改单个柜体的柜身饰面在柜体层级更改柜身饰面,可同时更新所选柜体的所有柜身板件,且不影响同类型的其他柜体。
- 复制粘贴柜体,快速创建相似的柜体先完整调整一个柜体,然后复制粘贴它,即可比逐个调整更快地创建多个相似的柜体。
- 为柜体的每块板件应用同一条封边条在柜体层级添加封边条,使其应用到该柜体的每块板件。
- 厨柜踢脚板如何影响单元总高度了解厨柜上约 100 mm 的踢脚板如何叠加到尺寸中显示的柜体高度上,从而得出单元总高度。
- 从目录仓库向设计添加自定义构造单元将仓库中的地柜单元加入您的目录,使其显示在 design portal 下的 furnish 中。
- 使用下拉菜单中的复用选项为多个柜体部件应用饰面从库中更改柜体的饰面,然后通过下拉菜单将同一饰面复用到其他部件,如柜体外部和柜体内部。
- 在柜体层级更改门板颜色,在板件层级更改板材饰面为整个柜体设置门板颜色,为单个板件设置外饰面。
- 修复抽屉越过柜体前沿的问题检查外置抽屉上的Drawer Back Gap,使抽屉不再越过柜体前沿。
- 移除单元的踢脚板关闭 Skirting Visibility 下方的正面踢脚板,使单元正面不再显示踢脚板。
- 为橱柜和岛台厨房选择正确的立面选择与您的厨房布局相匹配的立面方法,然后在图纸上添加尺寸。
- 在推拉门柜体中移除冲突的抽屉填充条对于带竖向隔板且抽屉位于最左端或最右端的推拉门柜体,请在 Construction 面板中单独移除会冲突一侧的填充条。
- 计算衣柜中抽屉的可用深度计算衣柜抽屉尺寸时,用柜体深度减去层板退距、背板偏移、背板厚度和抽屉面板厚度。
- 将灯带和射灯添加到吊柜底板通过向吊柜底板添加灯带和射灯,为吊柜提供照明。
- Apply finger groove panel handles to any unit typeAdd a finger-groove handle so its groove is cut into the shutter and the carcass adjusts, on base units, tall units and drawers alike.
- 通过五金规则为每个柜体附加现场五金创建五金规则,将正确的五金附加到每个柜体和衣柜,然后清理并启用该规则以设置铰链。
- 一次更改多个柜体的拉手多选柜体,然后使用属性面板中的'modify handle'选项一起更改它们的拉手。
- 在单元配置中选择衣柜门板类型请从单元配置中可用的门板类型里选择所需门板布局,无需手动建模。
- Manage shelf reveal across partitions and wardrobesUnderstand how shelf reveal reaches nested partitions and how to apply it across several wardrobes at once.
- 从单个柜体的构造中移除一块板件仅关闭所选柜体上的底板或背板等板件,而不改动组件定义。
- 在抽屉单元中设置抽屉侧边缩减量和面板延伸量在 3 Drawer Unit 中调整抽屉自身的面板缩减量和延伸量,以调整其面板的尺寸和形状。
- 在立面偏好设置中切换百叶方向、单元标注和搁板标注在立面偏好设置中开启或关闭百叶方向、单元标注和搁板标注,以控制显示哪些立面标注。
- 在衣柜中分别处理各个隔断分别选中分隔式衣柜的每个隔断,这样您就可以只为一个区域添加柜门,或只更改该区域的层板而不影响其他区域。
- 在柜体层级添加水平自定义板件并旋转它使用柜体层级自定义板件为柜体添加顶板,然后添加一块水平自定义板件并将其放置到任意位置。
- 为推拉门衣柜添加抽屉组在您的设计中为推拉门衣柜配置抽屉组。
- Add drawers 位于单元两侧先添加一块竖向板件,然后在每一侧添加抽屉,这样抽屉就能位于单元的两侧。
- 在柜体区域内添加隔板和玻璃在柜体区域内的空白处添加隔板,将柜体内部等分。
- 为柜体应用门板系统在 customize 选项卡中选择平开门、推拉门或上翻门门板系统,并将其应用到柜体。
- 使用Modify Countertop为一个台面应用到多个单元选择多个柜体,在一个弹窗中一起设置它们的台面厚度和材质。
- 使用防火板实体更改台面和柜体材质通过修改台面并应用更改来确认材质更改。
- 一次为多个单元更换拉手和材料将多个单元一起选中,使用 change material / interchange 控件,一次操作即可更换它们的饰面。
- 编辑连接件卡片,以更改整个设计和后续柜体编辑原始连接件,以便修改整个设计和后续柜体。
- 固定板件尺寸,使其不再随单元缩放将板件的长度、深度或高度设为固定值,这样缩放柜体或衣柜时该板件尺寸保持不变。
- 铰链数量和位置如何随柜体高度变化了解五金规则如何按柜体高度范围设定铰链数量和位置,并在高度变化时自动更新。
- 在柜体中放置自定义板件从目录中或使用Add Custom Panel添加自定义板件,沿虚线轮廓放置并单击确认。
- 将开放单元的侧封板深度设为柜体高度对于没有门板的上柜,将侧封板止于柜体高度,使其与柜体齐平。
- 在 Global Preferences 中为柜体和衣柜设置项目标准在项目层级一次性设置芯材、饰面、门板和拉手,之后添加的每个柜体和衣柜都会默认采用这些标准。
- 设置盲角柜的门板宽度查看盲角柜的门板宽度与柜体宽度、深度和高度之间的关系。
- 了解隔板,并在柜体内添加层板、板件或抽屉了解 Infurnia 中隔板的含义,并在隔板层级添加层板、竖向板件或抽屉。
- 壁柜请使用墙面gola型材,不要使用地柜型材为壁柜添加gola型材时,请选择墙面gola型材,因为地柜型材不适用于壁柜。
- 为什么踢脚板和顶封板的选项取决于地柜还是吊柜了解柜体的安装平面如何决定它是地柜还是吊柜,以及由此可选用哪些踢脚板、顶封板、顶线和横档选项。
- 通过构造在单元内添加参数化自定义面板在单元内添加水平顶板,并用参数化公式控制其尺寸和位置。
- 从厨房家具目录添加地柜、吊柜和高柜将房间标记为厨房,以便更轻松地访问 Insert / Furnish 中厨房家具下的地柜、吊柜和高柜。
- 在柜体构造中添加或移除侧封板在所选单元的柜体构造设置中,为其添加或移除左侧或右侧侧封板。
- 在衣柜构造下调整踢脚高度和门板系统在衣柜构造选项下的第三个标签页中,更改衣柜和标准柜体的踢脚高度或门板系统。
- 根据柜体总宽度计算柜身宽度用柜体总宽度减去两倍的柜身板件厚度,即可得出柜身宽度。
- 计算柜体的完成面标高将柜体高度、踢脚高度和台面厚度相加,得到用于对齐元素的总标高。
- 通过选择树或单元更改台面材料选择单元或使用选择树,然后选择子类别和具体材料或颜色,即可更改台面材料。
- 在单柜凸轮模式下检查板件之间的连接查看柜体各板件之间的所有连接场景、每个场景使用的连接件卡片以及实际钻孔。
- 通过admin portal查看哪些五金规则适用于柜体查找适用于柜体的五金规则,并查看其条件及所添加的五金。
- 为所放置的单元类型选择正确的偏好组选择与所放置单元类型相匹配的偏好组,使地柜、吊柜、顶柜和多用途单元使用柜体偏好,衣柜使用衣柜偏好。
- 从单个柜体开始创建自定义立面图或剖切立面图从特定柜体开始绘制立面图,以创建自定义立面图或剖切立面图。
- 两个柜体之间如何共用一根竖向gola拉手了解竖向gola拉手如何连接两个相邻柜体、如何在两侧板上开槽,以及移除后会发生什么。
- 台面如何影响所显示的地柜高度了解为什么在地柜上添加或移除台面,都不会改变该柜体所显示的柜身高度。
- 自定义板件如何列在柜体下了解自定义板件根据添加位置的不同,会列在哪个柜体下。
- 扩展与柜体调整如何决定板件尺寸了解板件的总厚度如何由其芯材和饰面计算得出,以及预贴面与后贴面芯材的计算方式有何不同。
- 将饰面材料关联到具有内部和外部饰面的柜体在饰面材料属性中关联柜体的外部和内部饰面材料,即可为柜体应用饰面。
- 在单元上设置外露侧板在板件层级打开该单元,并将该板件改为外露板件,因为它无法设为单元级默认值。
- 在放置柜体前设置柜体芯材和背板材料的默认值在柜体级偏好设置中选择柜体芯材和背板芯材,这样新增柜体时会自动使用这些材料。
- 为gola和G型材柜体设置顶板尺寸了解gola型材如何使顶板向后偏移,而G型材则使顶板保持与柜体尺寸一致。
- 为倾斜柜体形状使用自定义面板通过使用单独的自定义面板而非旋转标准柜体面板,创建倾斜或非标准柜体形状。
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- 在衣柜下方添加底部支撑板设置底部支撑板的数量和高度,使其在踢脚区域内均匀地立在柜体底部下方。
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- 为柜体选择正确的左端板或右端板为柜体添加左端板或右端板时,请注意:侧别由面向该单元柜门的方向决定。
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- 自动化规则如何按单元运行并重新应用了解自动化规则如何按单元评估、在每次运行时重置并重新应用,以及哪些单元和面板会被跳过。
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 在3D视图中隔离一个单元,并将QC范围限定到一个房间在不受墙壁遮挡的情况下近距离检查一个单元,然后通过为其设置独立的工作范围,仅对一个房间运行QC。
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
更多指南 10
显示全部(10)
- 通过批量编辑结构应用构造和制造设置使用批量编辑结构选项,将构造和制造配置设置应用到柜体和衣柜。
- 通过管理门户规则或手动添加连接件添加连接件有两种方式:在admin portal中定义规则,使匹配的导入柜体自动获得该规则的连接件;或手动添加连接件。
- Gola 与型材的放置了解在柜体建模中 gola 与型材分别应用在何处,以及两者如何出现在同一个柜体上。
- Add a hanging route via construction customizeAdd a hanging route to a wardrobe by opening construction customization on the top, selecting the hanging route option and picking it from the catalogue.
- 在快速访问、自定义和构造之间选择选择与您要进行的更改相匹配的柜体自定义菜单,无论是常规更改还是添加元素。
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- 了解明细表、组合 BOQ 和明细表模板了解基于明细表的输出如何处理隐藏元素和 workscope 排除的元素、柜体组合 BOQ 如何打印,以及如何保存和导出明细表。
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.