কেবিনেট আৰু মডুলাৰ ইউনিট
গাইড: 298
- কেবিনেটৰ প্ৰস্থ, গভীৰতা আৰু উচ্চতাত কি কি অন্তৰ্ভুক্ত নহয় বুজি লওকজানিব, শ্বাটাৰ, কাউণ্টাৰটপ আৰু স্কাৰ্টিঙৰ দৰে কোনবোৰ অংশ দিয়া মাপৰ পৰা পৃথকে যোগ কৰা হয়।
- কেবিনেটৰ নিৰ্মাণ, স্কাৰ্টিং, কাউণ্টাৰটপ আৰু কাৰ্কাছ পেনেল কাষ্টমাইজ কৰকএটা নিৰ্বাচিত কেবিনেটত কাষ্টমাইজ টেব খোলি তাৰ নিৰ্মাণ, স্কাৰ্টিং, কাউণ্টাৰটপ আৰু কাৰ্কাছ পেনেল ছেট কৰক।
- Split a tall unit into solid bottom and glass top shuttersBuild a mixed tall unit with a solid bottom shutter and a glass top shutter by setting the top shutter mechanism and panel core materials.
- ৱাৰ্ড্ৰব আৰু ৰান্ধনীঘৰৰ কেবিনেটৰ উচ্চতা তুলনা কৰকৱাৰ্ড্ৰবৰ উচ্চতাত স্কাৰ্টিং অন্তৰ্ভুক্ত হয়, আনহাতে ৰান্ধনীঘৰৰ কেবিনেটৰ উচ্চতা কেৱল কাৰ্কাছ বক্স।
- কেবিনেট নিৰ্মাণৰ ডিফল্ট পেৰামিটাৰসমূহ পৰীক্ষা কৰকবেক পেনেল গ্ৰুভিং, শ্বাটাৰ ৰিডাকচন, শেল্ফ ৰিভিল, বেক পেনেল অফচেট আৰু বেছ কেবিনেট টপৰ বাবে Infurnia-য়ে ব্যৱহাৰ কৰা ডিফল্ট মানসমূহ জানি লওক।
- কাষ্টম পেনেল আৰু পেনেল ডিজাইন সম্পাদনাৰ সৈতে এখন বক্ৰ কেবিনেট সৃষ্টি কৰককেবিনেট স্তৰত এটা কাষ্টম পেনেল যোগ কৰি, কাৰ্কাছ পেৰামিটাৰৰ পৰা ইয়াৰ আকাৰ নিৰ্ধাৰণ কৰি আৰু ইয়াৰ অফছেটসমূহ সমন্বয় কৰি এখন বক্ৰ কেবিনেট নিৰ্মাণ কৰক, যাতে ই সঠিকভাৱে অৱস্থিত হয়।
- শেলফ, ড্ৰয়াৰ আৰু হেঙাৰ ৰডেৰে ৱাৰড্ৰবৰ ভিতৰভাগ সাজু কৰকৱাৰড্ৰবৰ ভিতৰভাগ সাজু কৰিবলৈ শেলফ, ড্ৰয়াৰ, ভাৰ্টিকেল, হেঙাৰ ৰড আৰু পুল-আউট হেঙাৰ ৰড সঠিক ক্ৰমত যোগ কৰক।
- পাৰ্টিশ্যন, শেল্ফ আৰু ড্ৰয়াৰ চিষ্টেম ব্যৱহাৰ কৰি ৱাৰ্ড্ৰবৰ ভিতৰৰ অংশ নিৰ্মাণ কৰকৱাৰ্ড্ৰবৰ পাৰ্টিশ্যনৰ ভিতৰত Add shelves, ড্ৰয়াৰ চিষ্টেম আৰু নিৰ্মাণৰ বিকল্পসমূহ যোগ কৰি ইয়াৰ ভিতৰৰ অংশ নিৰ্মাণ কৰক।
- শাটাৰ সলনি কৰি এটা সাধাৰণ ৱাৰ্ডৰবক স্লাইডিং ৱাৰ্ডৰবলৈ ৰূপান্তৰ কৰকইয়াৰ বৰ্তমানৰ শাটাৰবোৰ মচি আৰু দুৱাৰ-দুটা বা দুৱাৰ-তিনিটা স্লাইডিং হিচাপে সংৰূপিত এটা নতুন শাটাৰ ব্যৱস্থা যোগ কৰি এটা সাধাৰণ ৱাৰ্ডৰবক স্লাইডিং ৱাৰ্ডৰবলৈ ৰূপান্তৰ কৰক।
- এডমিন টেবৰ জৰিয়তে কেবিনেটৰ ক'ৰ মেটেৰিয়েল সলনি কৰকএডমিন টেবৰ পৰা কেবিনেট বা কৰ্ণাৰ ইউনিটৰ ক'ৰ মেটেৰিয়েল আপডেট কৰক আৰু ছেটিংছ নিশ্চিত কৰক, যাতে সলনি বাছনি কৰা ইউনিটত প্ৰযোজ্য হয়।
- কেবিনেট-স্তৰৰ শ্বাটাৰ আৰু কাৰ্কাছ ফিনিশ আৰু ক'ৰ নিৰ্ধাৰণ কৰকপ্ৰপাৰ্টিজ পেনেলৰ পৰা শ্বাটাৰ আৰু কাৰ্কাছ ফিনিশ আৰু ক'ৰ মেটেৰিয়েল বাছনি কৰক, যাতে উত্তৰাধিকাৰী শ্বাটাৰবোৰে কেবিনেট অনুসৰণ কৰে।
- Change Materials ৰ জৰিয়তে কেবিনেটৰ ফিনিছ, ক'ৰ মেটেৰিয়েল আৰু এজবেণ্ড সলনি কৰকপ্ৰথমে Change Materials ব্যৱহাৰ কৰি কেবিনেটৰ ফিনিছ আৰু ক'ৰ মেটেৰিয়েল সলনি কৰক, তাৰ পিছত ইয়াৰ এজবেণ্ড সলনি কৰক।
- ডিজাইনত কেবিনেটৰ পিছফাল, ওপৰ, তল আৰু কাষৰ পেনেলসমূহ কনফিগাৰ কৰকপ্ৰতিটো কেবিনেট পেনেল পৃথকে পৃথকে কনফিগাৰ কৰক, যাতে ইয়াৰ আকাৰ, সামগ্ৰী, এজ বেণ্ড, পোহৰ আৰু হাৰ্ডৱেৰ আপুনি প্ৰয়োজনীয় নিৰ্মাণৰ সৈতে মিলে।
- একাধিক ইউনিটত ৩ মিমি ফাঁক প্ৰয়োগ কৰকএকেসময়তে কেইবাটাও ইউনিটত প্ৰতি ফালে ১.৫ মিমি হ্ৰাস আৰু ৩ মিমি শ্বাটাৰ ফাঁক নিৰ্ধাৰণ কৰক।
- কেৱল ইউনিটৰ উচ্চতা কেনেকৈ গণনা কৰা হয়টাইলিং, স্কাৰ্টিং, কেবিনেট আৰু গ্ৰেনাইটৰ বেধৰ যোগফলে প্ৰকৃততে কি জোখে আৰু মজিয়াৰ পৰা কেৱল ইউনিটৰ উচ্চতা ক'ৰ পৰা আহে, সেয়া জানক।
- পছন্দ সলনি হোৱাৰ আগতে যোগ কৰা ইউনিটবোৰ আপডেট কৰকইতিমধ্যে স্থাপন কৰা কেবিনেটবোৰত শাটাৰ, কাৰ্কাছ আৰু বেক-পেনেলৰ মূল সামগ্ৰী পুনৰ প্ৰয়োগ কৰক, যাতে সেয়া বৰ্তমানৰ পছন্দৰ সৈতে মিলে।
- ৱাৰড্ৰবৰ ভিতৰৰ অংশ, ড্ৰয়াৰ ছেট আৰু আইনা যোগ কৰকউলম্ব পাৰ্টিচন, চেল্ফ, ওলমোৱা সামগ্ৰী, ড্ৰয়াৰ ছেট আৰু শ্বাটাৰ আইনা যোগ কৰি ৱাৰড্ৰবৰ ভিতৰৰ অংশ সম্পূৰ্ণ কৰক।
- কেবিনেট আৰু কৰ্ণাৰ ইউনিটত নিৰ্মাণ শৈলী প্ৰয়োগ কৰকজানিব পাৰি যে নিৰ্মাণ শৈলী কেবিনেট আৰু কৰ্ণাৰ ইউনিটৰ বাবে পৃথকে নিৰ্ধাৰণ কৰা হয়।
- চিষ্টেম সম্পাদনা কৰি শ্বাটাৰ কেবিনেটক ড্ৰয়াৰ আৰু বাস্কেটলৈ ৰূপান্তৰ কৰকশ্বাটাৰ আঁতৰাই আৰু চিষ্টেম কাষ্টমাইজ কৰি এটা একক-শ্বাটাৰ কেবিনেটক ৱিকাৰ বাস্কেট আৰু ড্ৰয়াৰ ইউনিটলৈ ৰূপান্তৰ কৰক, তাৰ পিছত ড্ৰয়াৰ আৰু পাৰ্টিশ্বন যোগ কৰক, আঁতৰাওক আৰু সমন্বয় কৰক।
- লফ্ট ফ্ৰেম আৰু বক্স উপাদান ব্যৱহাৰ কৰি ৱাৰড্ৰবৰ বাবে এটা লফ্ট সৃষ্টি কৰকশ্বাটাৰ চিষ্টেমৰ গঠনৰ জৰিয়তে খোলাৰ দিশ সমন্বয় কৰক আৰু খোলাৰ দিশ টগল কৰক।
- অনেক কেবিনেটত ডাউৱেল, মিনিফিক্স বা PVC ভৰি নথকা সমস্যা সমাধান কৰকযদি অনেক কেবিনেটত ডাউৱেল, মিনিফিক্স বা PVC ভৰি নাই, তেন্তে প্ৰয়োগ কৰা নিৰ্মাণ শৈলীত Remove All Connectors সক্ৰিয় কৰা আছে নে নাই পৰীক্ষা কৰক।
- একাধিক কেবিনেটৰ এলিভেশ্যন সৃষ্টি কৰক আৰু ফিনিশসমূহ একেলগে সলনি কৰককেবিনেটৰ 2D Drawings খুলি কেইবাটাও কেবিনেট সামৰি লোৱা এলিভেশ্যন সৃষ্টি কৰক, তাৰ পিছত কেবিনেটসমূহ গোট হিচাপে বাছনি কৰি সিহঁতৰ মেটেৰিয়েল আৰু ফিনিশ এটা কাৰ্যত সলনি কৰক।
- কেবিনেটৰ গঠন কেনেকৈ শ্বাটাৰ, ড্ৰয়াৰ আৰু এক্সেছৰীত বিভক্ত হয়কেবিনেটৰ গঠন কেনেকৈ শ্বাটাৰ, ড্ৰয়াৰ আৰু এক্সেছৰীত বিভক্ত হয়, আৰু শ্বাটাৰ আৰু ড্ৰয়াৰ চিষ্টেমসমূহ কেনেকৈ পৃথকে ৰূপাংকিত কৰা হয়, সেয়া শিকক।
- ৰান্ধনীঘৰৰ ওখ ইউনিটৰ উচ্চতা আৰু গভীৰতা কেনেকৈ জোখা হয়ৰান্ধনীঘৰৰ ওখ ইউনিটৰ উচ্চতা আৰু গভীৰতা জোখোঁতে কোনবোৰ অংশ বাদ দিয়া হয়, সেয়া জানি লওক।
- ৱাৰড্ৰবৰ পাৰ্শ্ব পেনেলে কেনেকৈ মজিয়ালৈকে আগবাঢ়েৱাৰড্ৰবৰ পাৰ্শ্ব পেনেলে কেনেকৈ সম্পূৰ্ণ দৈৰ্ঘ্যৰে মজিয়ালৈকে যায় আৰু সন্মুখৰ স্কাৰ্টিঙৰ বাবে কিয় কাট-আউট কৰা হয়, সেয়া জানক।
- ফিনিছ আৰু এজ-বেণ্ড ছেটিংছ খুলিবলৈ এটা কেবিনেট বাছনি কৰকইয়াৰ প্ৰপাৰ্টিজ পেনেল খুলিবলৈ এটা কেবিনেট বাছনি কৰক, তাৰ পিছত Materials ৰ অধীনত ইয়াৰ ফিনিছ, বেক পেনেল ক’ৰ আৰু এজ বেণ্ডসমূহ ছেট কৰক।
- উলম্ব পাৰ্টিচনৰ সৈতে কেবিনেটৰ স্থান বিভক্ত কৰকস্থান এটা ভাগ কৰিবলৈ আৰু অনুপাত বা স্পষ্ট মানৰ দ্বাৰা ইহঁতৰ প্ৰস্থ নিৰ্ধাৰণ কৰিবলৈ Add vertical partitions ব্যৱহাৰ কৰক।
- কেবিনেট এটা প্ৰফাইল হেণ্ডেল বা হেণ্ডেলবিহীন দুৱাৰলৈ সলনি কৰকডিজাইনৰ সময়তে কেবিনেট এটা সাধাৰণ হেণ্ডেলৰ পৰা প্ৰফাইল হেণ্ডেল বা হেণ্ডেলবিহীন দুৱাৰলৈ পোনপটীয়াকৈ সলনি কৰক, কোনো সুকীয়া কেটেলগ বা কনষ্ট্ৰাকচন ছেটআপ নোহোৱাকৈ।
- একক এটা স্থাপন কৰি কপি আৰু সমান্তৰাল কৰি ৰান্ধনীঘৰৰ লেআউট সৃষ্টি কৰকএটা ৱাল ইউনিট বা লফ্ট সঠিক স্থানত স্থাপন কৰক, তাৰ পিছত বাকী এককবোৰ কপি আৰু সমান্তৰাল কৰি আপোনাৰ ৰান্ধনীঘৰৰ লেআউট সৃষ্টি কৰক।
- ৱাৰড্ৰবৰ নিৰ্মাণ হাতেৰে সলনি কৰক আৰু পিছফালৰ স্কাৰ্টিং বন্ধ কৰকএটা স্লাইডিং ৱাৰড্ৰবৰ বাবে ইয়াৰ নিৰ্মাণ হাতেৰে সলনি কৰি আৰু পিছফালৰ স্কাৰ্টিং বন্ধ কৰি ৱাৰড্ৰব কাষ্টমাইজ কৰক।
- Place dresser, TV and tall units from the furniture model libraryPlace dresser, TV and tall units using pre-built models or your own design, then adjust them to fit.
- কেবিনেট স্থাপন কৰাৰ আগতে বা পিছত ঘূৰাওকfurnish সঁজুলিৰ পৰা এটা কেবিনেট স্থাপন কৰক আৰু স্থাপন কৰাৰ আগতে space bar ৰে ঘূৰাওক বা পিছত rotate বিকল্পৰে ঘূৰাওক।
- প্ৰতিটো প্ৰজেক্টৰ বাবে কেবিনেট আৰু ৱাৰড্ৰবৰ পছন্দসমূহ নিৰ্ধাৰণ কৰকএটা প্ৰজেক্টক একাউণ্ট-জুৰি থকা ডিফল্টৰ পৰিৱৰ্তে নিজৰ কেবিনেট আৰু ৱাৰড্ৰব সামগ্ৰীৰ ডিফল্ট দিবলৈ ডিজাইনৰ পছন্দসমূহৰ মেনু খোলক।
- কেন্দ্ৰীয় কেবিনেটৰ পাৰ্শ্ব পেনেলৰ নিৰ্মাণ বুজি লওককেন্দ্ৰীয় কেবিনেটৰ পাৰ্শ্ব পেনেলসমূহৰ পূৰ্বনিৰ্ধাৰিত নিৰ্মাণ আৰু বাওঁ, সোঁ, ওপৰ আৰু তলৰ পেনেলসমূহ কেনেকৈ ইটোৱে সিটোৰ লগত খাপ খায়, সেয়া শিকক।
- কুইক এক্সেছ পেনেলত ৰান্ধনীঘৰৰ কেবিনেটৰ উচ্চতা বুজি লওকৰান্ধনীঘৰৰ কেবিনেটৰ কুইক এক্সেছ পেনেলত দেখুওৱা উচ্চতাই কি জোখে আৰু ইয়াক সম্পাদনা কৰিলে কি সলনি হয়, শিকি লওক।
- কেটেলগৰ পৰা ইউনিট বাছি লৈ আৰু ড্ৰপ কৰি কেবিনেট যোগ কৰককেটেলগ খোলক, বেছ ইউনিট শ্ৰেণী এটা বাছনি কৰক আৰু প্ৰয়োজনীয় প্ৰস্থৰ কেবিনেট এটা বাছি লওক, তাৰ পিছত আপোনাৰ ডিজাইন সাজিবলৈ ইয়াক লে-আউটত ড্ৰপ কৰক।
- Add cabinets using FR enter and room templatesOpen the cabinet library with FR and enter, then place, rotate, resize and duplicate base or wall units.
- খালী কাৰ্কাছৰ পৰা নিজেই ৱাৰড্ৰবৰ ভিতৰভাগ নিৰ্মাণ কৰককেটেলগৰ পৰা এটা ৱাৰড্ৰব বিকল্প স্থাপন কৰক আৰু শেল্ফ আৰু উলম্ব পেনেল বা সাজু হোৱা পাৰ্টিশ্বন সংৰচনা ব্যৱহাৰ কৰি ইয়াৰ ভিতৰভাগ নিজেই নিৰ্মাণ কৰক।
- কেবিনেটৰ আকাৰ সলনি কৰক আৰু সামগ্ৰীৰ শ্ৰেণীসমূহ বুজি লওকপ্ৰপাৰ্টিজ পেনেলৰ পৰা কেবিনেটৰ আকাৰ পৰিৱৰ্তন কৰক আৰু ইয়াৰ সামগ্ৰীসমূহ কেনেকৈ শ্ৰেণীবদ্ধ কৰা হয় শিকি লওক।
- শ্বাটাৰ যোগ কৰাৰ আগতে ৱাৰ্ড্ৰবখন মূল পাৰ্টিচনত ভাগ কৰকপ্ৰথমে ৱাৰ্ড্ৰবখন মূল পাৰ্টিচনত ভাগ কৰক, তাৰ পিছত শেল্ফ আৰু ভাৰ্টিকেলৰ বাবে সেইবোৰ উপ-ভাগ কৰক, আৰু শেষত কাষ্টমাইজ কৰা মেকানিজমৰ সৈতে শ্বাটাৰ ছিষ্টেম যোগ কৰক।
- কেবিনেট মডিউলৰ প্ৰস্থ, উচ্চতা আৰু গভীৰতাৰ পৰিসীমা কেনেকৈ বলবৎ কৰা হয়প্ৰতিটো কেবিনেট মডিউলৰ মাপ নিৰ্ধাৰণৰ নিয়মে কেনেকৈ ন্যূনতম আৰু সৰ্বোচ্চ প্ৰস্থ, উচ্চতা আৰু গভীৰতা নিৰ্ধাৰণ কৰে আৰু ডিজাইনাৰসকলক সেই সীমাৰ ভিতৰত ৰাখে, সেয়া জানি লওক।
- ষ্টেণ্ডাৰ্ড বেছ ইউনিটৰ জোখ-মাখ কেনেকৈ কাম কৰেৰান্ধনীঘৰ মডেলিঙত ব্যৱহৃত ষ্টেণ্ডাৰ্ড বেছ ইউনিটৰ গভীৰতা আৰু উচ্চতা শিকক, আৰু সেই জোখবোৰে কি বাদ দিয়ে।
- মজিয়াৰ প্লেনত ৰান্ধনীঘৰৰ ইউনিটসমূহ স্থানান্তৰ আৰু ঘূৰ্ণন কৰকMV কমাণ্ড বা move tool ৰে স্থানান্তৰ কৰি আৰু spacebar ৰে ঘূৰ্ণন কৰি বেৰত ৰান্ধনীঘৰৰ ইউনিটসমূহ সঠিকভাৱে স্থাপন কৰক।
- 2D আৰু 3D ভিউত কেবিনেট স্থানান্তৰ কৰককেবিনেট এটাক ওপৰলৈ আৰু তললৈ স্থানান্তৰ কৰক আৰু 2D ভিউ বা 3D ভিউত ইয়াক পুনৰ স্থাপন কৰক।
- শুদ্ধ অৱস্থানৰ বাবে ফ্ল'ৰ প্লেনত কেবিনেট স্থাপন কৰককেবিনেটবোৰ ফ্ল'ৰ প্লেনত এনেদৰে স্থাপন কৰক যাতে সিহঁত কাষৰীয়া কেবিনেটত স্নেপ হয়, আৰু স্পেচ বাৰেৰে সিহঁতক ঘূৰাওক।
- কেবিনেটক আন ইউনিট প্ৰকাৰলৈ ৰূপান্তৰ কৰকঅপ্ৰয়োজনীয় পেনেল বন্ধ কৰক, আকাৰ নিৰ্ধাৰণ কৰক আৰু কেবিনেটক অন্য প্ৰকাৰলৈ ৰূপান্তৰ কৰিবলৈ আভ্যন্তৰীণ বিভাজন যোগ কৰক।
- ওখ ইউনিটত খোলাৰ দিশ টগল কৰক আৰু লিফ্ট-আপ মেকানিজম ছেট কৰকওখ ইউনিটৰ খোলাৰ দিশ টগল কৰক আৰু ইয়াৰ মেকানিজম এটা লিফ্ট-আপ কনফিগাৰেচনলৈ ছেট কৰক।
- Pricing Quotation ত কেবিনেট আৰু ড্ৰয়াৰ চেনেল কেনেকৈ দেখা যায় বুজি লওকBase Unit, Wall Unit আৰু Tall Unit কেবিনেটবোৰ কেনেকৈ লেবেল কৰা হয় আৰু তালিকাভুক্ত কৰা হয়, আৰু কোটেশ্যনত ড্ৰয়াৰৰ চেনেল কেনেকৈ গণনা কৰা হয় আৰু মূল্য নিৰ্ধাৰণ কৰা হয়, সেয়া শিকক।
- ৱাৰড্ৰবৰ বাবে স্বয়ংক্ৰিয়ভাৱে আকাৰ সলনি হোৱা আগতেই বনোৱা আভ্যন্তৰীণ সংৰচনাসমূহ ব্যৱহাৰ কৰকcustomize বিকল্পৰ জৰিয়তে ৱাৰড্ৰবৰ আভ্যন্তৰীণ সংৰচনা যোগ কৰক আৰু এটা শেলফৰ উচ্চতা সমন্বয় কৰক, যাতে বাকী শেলফবোৰে স্বয়ংক্ৰিয়ভাৱে আকাৰ সলনি কৰিব পাৰে।
- কাৰ্কাছ পেনেল সংৰচনাৰ সৈতে ৱাৰড্ৰবৰ গঠন কনফিগাৰ কৰকৱাৰড্ৰবৰ গঠন কনফিগাৰ কৰিবলৈ আৰু উলম্ব পেনেল আৰু ড্ৰয়াৰৰ দৰে আভ্যন্তৰীণ আৰু বাহ্যিক উপাদান যোগ কৰিবলৈ Carcass panel construction শাখাটো ব্যৱহাৰ কৰক।
- Align Dimension ৰ সৈতে elevation ত dimension ৰ এককelevation ত একেটা দিশত unit এটাৰ carcass, partitions আৰু shutters ৰ কাষেৰে বাছি লৈ dimension চেইন কৰক।
- কেবিনেট প্ৰকাৰ অনুসৰি ভিউ-নিৰ্দিষ্ট লেয়াৰ ব্যৱহাৰ কৰি পৃথক মজিয়া পৰিকল্পনা সৃষ্টি কৰকপ্ৰতিটো কেবিনেট প্ৰকাৰক নিজৰ পৰিকল্পনা দিয়ক যাতে বেছ, ৱাল আৰু লফ্ট ইউনিট পৃথকভাৱে প্ৰিন্ট হয়।
- ৱাল কেবিনেট hanging brackets ৰ সৈতে ৱাল কেবিনেট ওলোমাওকৱাল কেবিনেট ওলোমাবলৈ hardware warehouse ৰ পৰা ৱাল কেবিনেট hanging brackets ব্যৱহাৰ কৰক।
- ৱাৰড্ৰব নিৰ্মাণ শৈলীয়ে কেনেকৈ কাৰ্কাছ পেৰামিটাৰ সংৰক্ষণ কৰেৱাৰড্ৰব ইউনিট নিৰ্মাণ শৈলীয়ে কোনবোৰ কাৰ্কাছ পেৰামিটাৰ ধাৰণ কৰে আৰু শৈলী আপডেট কৰিলে সেইবোৰ ৱাৰড্ৰবত কেনেকৈ প্ৰয়োগ হয়, সেয়া জানি লওক।
- কেবিনেটৰ তলৰ পেনেলখন কাৰ্কাছ পেনেলৰ ডাঠতাৰে ভিতৰলৈ সৰকাওকতলৰ পেনেলখন এটা পেনেল ডাঠতাৰে ওপৰলৈ তোলক, যাতে ই পাৰ্শ্ব পেনেলৰ তলত নহৈ কাৰ্কাছৰ ভিতৰত থাকে।
- Furnish আৰু move tool ৰ জৰিয়তে লফ্ট ইউনিট স্থাপন কৰক আৰু স্থানান্তৰ কৰকKitchen Furniture ৰ পৰা লফ্ট ইউনিট স্থাপন কৰক, এৰ' অপচন বা move tool ৰে স্থানান্তৰ কৰক, আৰু প্ৰয়োজন অনুসৰি বক্স লফ্ট যোগ কৰক বা আকাৰ পৰিৱৰ্তন কৰক।
- ডিফল্ট ১ মিমি কেবিনেট হ্ৰাস বুজি লওকডিফল্টভাৱে ড্ৰয়াৰ-স্তৰৰ নিৰ্মাণত প্ৰতিটো কেবিনেট চাৰিওফালে ১ মিমি হ্ৰাস কৰা হয় কেনেকৈ জানি লওক।
- চিংক ইউনিট ৰেইল আৰু স্কাৰ্টিং বিকল্পসমূহ বুজি লওকচিংক ইউনিটসমূহ ওপৰ আৰু পিছৰ ৰেইলৰ সৈতে কেনেকৈ নিৰ্মাণ কৰা হয় আৰু কেবিনেট স্কাৰ্টিং বিকল্পৰ পৰা স্কাৰ্টিং কেনেকৈ অন বা অফ কৰিব লাগে শিকি লওক।
- কেবিনেট, পাৰ্টিশ্বন, শ্বাটাৰ আৰু পেনেলৰ নিয়ন্ত্ৰণত উপনীত হ'বলৈ ছিলেকশ্যন ট্ৰি ব্যৱহাৰ কৰকইয়াৰ ওপৰৰ স্তৰসমূহ দেখুৱাবলৈ আৰু পোনপটীয়াকৈ আপুনি প্ৰয়োজনীয় নিয়ন্ত্ৰণলৈ যাবলৈ কেবিনেটৰ এটা অংশ বাছনি কৰক।
- এক ক্লিকত এটা মানক ৱাৰড্ৰবৰ ভিতৰৰ বিন্যাস যোগ কৰকৱাৰড্ৰবত হাতেৰে নিৰ্মাণ নকৰি এক ক্লিকত তলৰ ড্ৰয়াৰৰ দৰে এটা মানক বিন্যাস যোগ কৰক।
- দুটা কেবিনেটৰ মাজত এটা উলম্ব গোলা প্ৰফাইল যোগ কৰকদুয়োটা কেবিনেট বাছনি কৰক আৰু সিহঁতৰ মাজত এটা উলম্ব গোলা প্ৰফাইল যোগ কৰিবলৈ বাওঁফালৰ প্ৰপাৰ্টি মেনু খোলক।
- সঠিক লেভেলত furnish লাইব্ৰেৰীৰ পৰা ৰান্ধনীঘৰৰ ইউনিট যোগ কৰকৰান্ধনীঘৰৰ লেভেলত কাম কৰি থাকোঁতে furnish লাইব্ৰেৰীৰ পৰা ৰান্ধনীঘৰৰ ইউনিট স্থাপন কৰক, যাতে সেইবোৰ সঠিক উচ্চতাত পৰে।
- মডুলাৰ বেছ, ৱাল আৰু খোলা ইউনিটৰ পৰা এটা TV ইউনিট বনাওকFurnish পেনেল খোলক, বহুমুখী মডুলাৰ ফাৰ্নিচাৰ বাছনি কৰক, আৰু TV ইউনিট ৰচনা কৰিবলৈ ইউনিটবোৰ একত্ৰিত কৰক, ঘূৰাওক আৰু স্থাপন কৰক।
- বেচ ইউনিটৰ পৰা একেলগে ইউনিটৰ প্ৰস্থ, গভীৰতা আৰু উচ্চতা সলনি কৰকবেচ ইউনিটসমূহ বাছনি কৰি প্ৰস্থ, গভীৰতা আৰু উচ্চতাৰ মান সম্পাদনা কৰি সিহঁতৰ জোখ একেলগে সলনি কৰক।
- কেবিনেট পৰ্যায়ত কেবিনেটৰ ভিতৰৰ ৰং সলনি কৰকএটা কেবিনেট বাছনি কৰক, কেবিনেট পৰ্যায়লৈ যাওক আৰু ইয়াৰ ভিতৰৰ ৰং নিৰ্ধাৰণ কৰক, যাতে পৰিৱৰ্তনটো কেবিনেটৰ ভিতৰৰ অংশত প্ৰযোজ্য হয়।
- Construction আৰু position ফিল্ডৰ জৰিয়তে কেবিনেট লক সলনি বা স্থানান্তৰ কৰক3D ত লকটো নিৰ্বাচন কৰি আৰু ইয়াৰ position ফিল্ডসমূহ সমন্বয় কৰি কেবিনেট লক স্থানান্তৰ কৰক, কাৰণ লকটো কেবিনেটৰ অংশ, ই স্বতন্ত্ৰ বস্তু নহয়।
- বহু-নিৰ্বাচনৰ জৰিয়তে একেলগে কেইবাটাও ইউনিট সলনি কৰককেৱল সেই ইউনিটবোৰ বাছনি কৰক যিবোৰে এটা সলনি ভাগ কৰিব লাগে, তাৰ পিছত সেইটো একেলগে সকলোতে প্ৰয়োগ কৰক।
- একেলগে কেইবাটাও ৱাল ইউনিটৰ গঠন সলনি কৰককৰ্ণাৰ ইউনিটৰ বাহিৰে সকলো ৱাল ইউনিট বাছনি কৰক, তাৰ পিছত bulk action ব্যৱহাৰ কৰি bulk structure বাছনি কৰি সেইবোৰ একেলগে সলনি কৰক।
- কেৱল বিদ্যমান কেবিনেটৰ বাবে কানেক্টৰ কাৰ্ড ক্লোন কৰককেৱল বিদ্যমান কেবিনেটত প্ৰযোজ্য এটা পৰিৱৰ্তিত সংস্কৰণ সৃষ্টি কৰিবলৈ কানেক্টৰ কাৰ্ড ক্লোন কৰক।
- দুটা কেবিনেটক এটা ব্যৱহাৰকাৰী কম্পোনেন্টত একত্ৰিত কৰকদুটা পৃথক কেবিনেটক এটা ব্যৱহাৰকাৰী কম্পোনেন্টত একত্ৰিত কৰক, যি এটা একক একক হিচাপে কাম কৰে।
- ব্লাইণ্ড কৰ্ণাৰ ইউনিটসমূহ সোঁহাতৰ বা বাওঁহাতৰ হিচাপে কনফিগাৰ কৰকব্লাইণ্ড কৰ্ণাৰ ইউনিট এটাক সোঁহাতৰ বা বাওঁহাতৰ দিশৰ বিকল্পত ছেট কৰক, যাতে ই সঠিকভাৱে কনফিগাৰ হয়।
- Ctrl+C আৰু Ctrl+V ব্যৱহাৰ কৰি স্থাপন কৰা ৱাৰড্ৰব এটাৰ প্ৰতিলিপি কৰকস্থাপন কৰা ৱাৰড্ৰব ইউনিট এটাৰ প্ৰতিলিপি কৰি বাকী থকা ঠাইত পে'ষ্ট কৰক, তাৰ পিছত অৱস্থান সমন্বয় কৰিবলৈ ইউনিটবোৰ এটাক আনটোৰ পিছত টানক।
- Edit connector কেবিনেট প্ৰতি কাৰ্ডৰ ব্যৱধান, একক ইউনিট পেনেল কেম ম'ডতকেৱল এটা কেবিনেটৰ বাবে সংযোগকাৰী কাৰ্ডৰ ব্যৱধান সলনি কৰক, আন কোনো কেবিনেটত প্ৰভাৱ নপৰাকৈ।
- ৱাৰড্ৰবৰ প্ৰস্থ, উচ্চতা আৰু গভীৰতা সম্পাদনা কৰকৱাৰড্ৰবৰ প্ৰস্থ, উচ্চতা আৰু গভীৰতা সলনি কৰক আৰু ভিতৰৰ বিন্যাস স্বয়ংক্ৰিয়ভাৱে সমন্বয় হ'বলৈ দিয়ক।
- SU চৰ্টকাটেৰে Single Unit CAM Mode লিখকপেনেলৰ বাবে Single Unit CAM Mode খুলিবলৈ প্ৰডাকচন ডিজাইনত SU কীবৰ্ড চৰ্টকাট ব্যৱহাৰ কৰক।
- Find TV base and TV drawer units in multi-purpose modular furnitureLocate TV base and TV drawer units, in single or double door and short, 450 or 600 heights, under the multi-purpose modular furniture section.
- হেঙাৰ অংশৰ বাবে ৱাৰড্ৰব হেঙাৰ বিচাৰি উলিয়াওকহেঙাৰ অংশত পাৰ্টিশ্যন স্তৰৰ অধীনত accessory হিচাপে ৱাৰড্ৰব হেঙাৰ বিচাৰি উলিয়াওক, য'ত ষ্ট'ৰত ইতিমধ্যে ব্ৰেণ্ডবিহীন হেঙাৰ উপলব্ধ আছে।
- অনুমোদিত সীমাৰ বাহিৰত থকা কেবিনেটৰ প্ৰস্থ ঠিক কৰকঅনুমোদিত সীমাৰ ভিতৰত কেবিনেটৰ প্ৰস্থ দিয়ক, যাতে নিৰ্মাণ অবৈধ বুলি ছিষ্টেমে দেখুওৱা ত্ৰুটি আৰু নেদেখুৱায়।
- আপোনাৰ 2D কেবিনেট লে-আউটৰ পৰা 3D মডেল সৃষ্টি কৰক2D ডিজাইন ভিউত কেবিনেটসমূহ স্থাপন কৰক আৰু 3D লৈ সলনি কৰক, আপোনাৰ লে-আউটৰ পৰা 3D মডেল স্বয়ংক্ৰিয়ভাৱে সৃষ্টি হ'ব।
- কেবিনেটৰ মেটেৰিয়েল প্ৰপাৰ্টি কেনেকৈ ছেট কৰা হয়এটা কেবিনেটৰ মেটেৰিয়েল প্ৰপাৰ্টি কেইবাটাও পৃথক ফিল্ডৰ জৰিয়তে ছেট কৰা হয়, আৰু শাটাৰৰ বাহ্যিক ফিনিছ সাধাৰণতে বাকীবোৰৰ পৰা পৃথকভাৱে বাছনি কৰা হয়।
- ১৮০০ মিমিৰ ওপৰৰ কেবিনেটবোৰক লফ্ট ইউনিট হিচাপে কেনেকৈ গণ্য কৰা হয়Auto Presentation টেমপ্লেটৰ ন্যূনতম উচ্চতা আৰু Loft detection ছুইচে কেনেকৈ নিৰ্ধাৰণ কৰে যে ১৮০০ মিমিৰ ওপৰৰ কেবিনেট এটাক লফ্ট ইউনিট হিচাপে গণ্য কৰা হয় নে নহয়, সেয়া জানি লওক।
- কেবিনেটৰ ন্যূনতম আৰু সৰ্বোচ্চ আকাৰৰ সীমাই কেনেকৈ কাম কৰেকেবিনেটৰ প্ৰস্থ, উচ্চতা আৰু গভীৰতাত ন্যূনতম আৰু সৰ্বোচ্চ আকাৰৰ সীমা কেনেকৈ প্ৰযোজ্য হয় আৰু সেইবোৰ ক'ত ছেট কৰা হয়, সেয়া জানক।
- admin portalত থকা বৰ্তমানৰ কেবিনেট আইটেমসমূহ পৰিচালনা আৰু সম্পাদনা কৰকadmin portalত থকা বৰ্তমানৰ কেবিনেট আইটেমসমূহ পৰিচালনা আৰু সম্পাদনা কৰক।
- ৰান্ধনীঘৰৰ আচবাব পুথিভঁৰালৰ পৰা ৱাল ইউনিট আৰু টল ইউনিট স্থাপন কৰকৰান্ধনীঘৰৰ আচবাব পুথিভঁৰালৰ পৰা এটা ৱাল ইউনিট বা টল ইউনিট স্থাপন কৰক আৰু ইয়াৰ জোখ-মাখ সমন্বয় কৰক, আন কেবিনেট প্ৰকাৰৰ দৰে একে স্থাপন বিকল্প ব্যৱহাৰ কৰি।
- Y-অক্ষ ব্যৱহাৰ কৰি ৱাল কেবিনেটৰ ওপৰত লফ্ট স্থাপন কৰকলফ্টটো ৱাল ইউনিটসমূহৰ ওপৰত সঠিকভাৱে অৱস্থিত হ'বলৈ ইয়াৰ Y-অক্ষ ৱাল কেবিনেটৰ Y-অক্ষৰ সৈতে 600 mm যোগ কৰি নিৰ্ধাৰণ কৰক।
- SKU গঠন সলনি কৰাৰ পিছত কেশ্ব ৰিফ্ৰেছ কৰক আৰু কেবিনেটসমূহ সলনি কৰককেটেলগত SKU গঠন সলনি কৰাৰ পিছত, কেশ্ব ৰিফ্ৰেছ কৰক আৰু design portal-ত কেবিনেটসমূহ সলনি কৰক।
- কেবিনেট ঘূৰাওক আৰু ইয়াৰ অৱস্থান আৰু ঘূৰ্ণন নিৰ্ধাৰণ কৰকবাছনি কৰা কেবিনেটক space bar বা সঠিক Y কোণেৰে ঘূৰাওক, পেনেলৰ ফিনিছ ঘূৰাওক, আৰু bottom height ৰ সৈতে Position Y শুদ্ধভাৱে পঢ়ক।
- ইউনিট-স্তৰৰ পৰিৱৰ্তনে কেনেকৈ পেনেললৈ বিয়পি যায় চাওকইউনিট-স্তৰৰ মেটেৰিয়েল পৰিৱৰ্তন কেতিয়া পেনেললৈ পায় আৰু অটোমেচন নিয়ম আৰু লিংকড SKU-এ কেনেকৈ ইয়াক অগ্ৰাহ্য কৰিব পাৰে, শিকক।
- ছাইজিং নিয়মৰ জৰিয়তে কেবিনেটৰ ন্যূনতম আৰু সৰ্বোচ্চ আকাৰৰ সীমা নিৰ্ধাৰণ কৰকউৎস মডেল আৰু admin portal-ত ছাইজিং নিয়ম কনফিগাৰ কৰক, যাতে কেবিনেটৰ মাত্ৰাই অনুমোদিত সীমাৰ বাহিৰলৈ যাব নোৱাৰে।
- কেবিনেট বা পাৰ্টিশ্যনত বাহ্যিক আৰু আভ্যন্তৰীণ সীমাৰ বাবে চাইজিং নিয়ম নিৰ্ধাৰণ কৰকএটা ইউনিটৰ সীমা ইয়াৰ বাহ্যিক জোখত প্ৰযোজ্য হ'ব নে ইয়াৰ আভ্যন্তৰীণ খালী ঠাইত প্ৰযোজ্য হ'ব, তাক বাছনি কৰক, আৰু এটা এটাকৈ ইউনিটত বা একেলগে প্ৰয়োগ কৰক।
- মজিয়াৰ প্লেনত কেবিনেটৰ লেবেল স্পষ্টকৈ দেখুৱাওকমজিয়াৰ প্লেনত প্ৰতিখন কেবিনেটে ইয়াৰ নম্বৰ লেবেল দেখুৱায়, আৰু যেতিয়া লিখনিয়ে অন্য উপাদানৰ সৈতে ওপৰা-উপৰি হয় তেতিয়া আপুনি এটা কাষ্টম লিডাৰ-শৈলীৰ লেবেল যোগ কৰিব পাৰে।
- কেবিনেট, ৱাৰড্ৰব আৰু কাষ্টম পেনেল শ্ৰেণীসমূহ বুজি লওকInfurnia-য়ে ইউনিটসমূহক তিনিটা পৃথক শ্ৰেণীত কেনেকৈ সংগঠিত কৰে জানি লওক: কেবিনেট, ৱাৰড্ৰব আৰু কাষ্টম পেনেল।
- ৱাৰড্ৰব ডিজাইন সৃষ্টি কৰিবলৈ FR চৰ্টকাট ব্যৱহাৰ কৰকFR চৰ্টকাটেৰে ৱাৰড্ৰব ডিজাইন আৰম্ভ কৰক, তাৰ পিছত ডাবল ছুইং ছাটাৰ স্থাপন কৰক আৰু কাৰ্কাছৰ ভিতৰৰ উপাদানসমূহ পৰিচালনা কৰক।
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- কেবিনেটত স্থিৰতা ৰেল যোগ কৰক, ঠাই আগুৰি দিয়ক আৰু আঁতৰাওককেবিনেটৰ প্ৰপাৰ্টি পেনেলৰ পৰা স্থিৰতা ৰেল যোগ কৰক আৰু ছিষ্টেমে সেইবোৰ তলৰ আৰু ওপৰৰ পেনেলৰ মাজত সমানভাৱে ঠাই আগুৰি ৰাখিব।
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- কেবিনেট সম্পাদনা পেনেলৰ টেবসমূহত ছেটিংছ বিচাৰি উলিয়াওকআপুনি প্ৰয়োজনীয় ছেটিং পাবলৈ Quick Access, Customize আৰু Construction টেব আৰু selection tree ব্যৱহাৰ কৰক।
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- কেবিনেট কেনেকৈ স্তৰত সংগঠিত হয়ডিজাইন মডিউলত এটা কেবিনেট কেবিনেট, পাৰ্টিশ্যন, শ্বাটাৰ চিষ্টেম আৰু পেনেল স্তৰেৰে গঠিত, আৰু প্ৰতিটো স্তৰে নিজৰ ছেটিং বহন কৰে।
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- নতুন প্ৰকল্পই ব্যৱহাৰ কৰা একক আৰু সঠিকতা জানকনতুন প্ৰকল্প মিলিমিটাৰত জোখা হয়, সঠিকতা 1 mm লৈকে।
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs ছেটিংছত ইউনিট আৰু পেনেল এনোটেশ্বন পুনৰ নিযুক্ত কৰকদুটা ম'ডৰ এটা ব্যৱহাৰ কৰি আপোনাৰ আউটপুটত ইউনিট আৰু পেনেল লেবেল পুনৰ সংখ্যায়িত কৰক; পৰিৱৰ্তনটো ঘূৰাই নিদিয়াৰ বাবে প্ৰথমে নিশ্চিত কৰক।
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- ঘূৰাই দিয়াৰ আগতে এটা কেবিনেট বাছনি কৰকপ্ৰথমে কেবিনেটটো বাছনি কৰক, যাতে ইয়াক ঘূৰাই দিলে ইয়াৰ বাউণ্ডিং বক্সৰ পৰা ওলাই নাযায়।
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- মজিয়াৰ টাইলৰ ফাঁকৰ ওপৰত ৱাল ইউনিটৰ তলৰ উচ্চতা নিৰ্ধাৰণ কৰকবেছ ইউনিটসমূহ শূন্য স্তৰৰ পৰা 12 mm ওপৰত কিয় থাকে জানক, যাতে ৱাল ইউনিটৰ তলৰ উচ্চতা মানক 1450 mm ৰ পৰা 12 mm ওপৰত নিৰ্ধাৰণ হয়।
- ব্লাইণ্ড কৰ্ণাৰ ইউনিট আৰু ডামি পেনেল ছেট আপ কৰকশ্বাটাৰ আৰু নন-শ্বাটাৰ ফ্ৰণ্ট পেনেলৰ মাজত ডামি পেনেল থকা ব্লাইণ্ড কৰ্ণাৰ ইউনিট এটা নিৰ্মাণ কৰক আৰু ইয়াৰ গভীৰতা ছেট কৰক।
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- এলিভেচন ভিউত Skeleton ম'ডেৰে কেবিনেটৰ ভিতৰভাগ দেখুৱাওকএলিভেচন ভিউত Turn on Skeleton mode কৰক, যাতে শ্বাটাৰবোৰ লুকুৱাই কেবিনেটৰ ভিতৰৰ পাৰ্টিশ্বন আৰু কাৰ্কাছ ওলাই পৰে, আৰু আপুনি সেইবোৰত পোনপটীয়াকৈ ডাইমেন্সন দিব পাৰে।
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- একক ম'ডত ফিল্টাৰ ব্যৱহাৰ কৰি সংঘৰ্ষসমূহ স্বয়ংক্ৰিয়ভাৱে সমাধান কৰকসংঘৰ্ষ চিনাক্তকৰণ চলাই, উলংঘনসমূহলৈ ফিল্টাৰ কৰি আৰু সোঁ-তলৰ বিকল্পসমূহৰ পৰা সেইবোৰ সমাধান কৰি একক ম'ডত সংঘৰ্ষসমূহ সমাধান কৰক।
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- পাৰ্টিশ্যন স্তৰ আৰু ড্ৰয়াৰ ছেটৰ জৰিয়তে কেবিনেটত ড্ৰয়াৰ যোগ কৰককেবিনেটৰ পাৰ্টিশ্যন স্তৰৰ পৰা কেবিনেটৰ ভিতৰত ড্ৰয়াৰ সুমুৱাওক, তাৰ পিছত ইয়াৰ উচ্চতা নিৰ্ধাৰণ কৰক আৰু প্ৰয়োজন হ'লে তলত এটা শেলফ যোগ কৰক।
- কেবিনেট আৰু ৱাৰড্ৰবত শ্বাটাৰ ডিজাইন সংৰক্ষণ কৰি পুনৰ ব্যৱহাৰ কৰকInfurnia ত এটা শ্বাটাৰ ডিজাইন সংৰক্ষণ কৰক আৰু modify shutter design ৰ জৰিয়তে কেবিনেট আৰু ৱাৰড্ৰবত প্ৰয়োগ কৰক।
- ইউনিটত স্কাৰ্টিং যোগ কৰক আৰু সোঁফালে দেখুৱাওকঅ-কাঠৰ স্কাৰ্টিং অন কৰক, কাৰ্কাছৰ উচ্চতা শুদ্ধভাৱে ছেট কৰক আৰু প্ৰতিফালে স্কাৰ্টিং দৃশ্যমানতা সক্ৰিয় কৰক।
- গোটেই কেবিনেট বা এটা মাত্ৰ পাৰ্টিশ্যনত শ্বাটাৰ ছিষ্টেম যোগ কৰকএখন খোলা কেবিনেটত গোটেইখনতে বা এটা মাত্ৰ পাৰ্টিশ্যনত শ্বাটাৰ ছিষ্টেম যোগ কৰক।
- ৱাৰড্ৰবত ভিতৰৰ ড্ৰয়াৰ যোগ কৰি ছেটআপ কৰকপাৰ্টিশ্যনৰ উচ্চতা নিৰ্ধাৰণ কৰি, ড্ৰয়াৰটো ভিতৰৰ আৰু বক্স টাইপলৈ ছেট কৰি, আৰু শ্বাটাৰৰ ডাঠৰ সৈতে ফিলাৰসমূহ মিলাই ৱাৰড্ৰবত এটা ভিতৰৰ ড্ৰয়াৰ যোগ কৰক।
- একেলগে কেইবাটাও ইউনিটত ক'ৰ আৰু মেটেৰিয়েলৰ পৰিৱৰ্তন প্ৰয়োগ কৰকবাল্ক এডিট, গ্ৰুপ চিলেকচন আৰু কমন প্ৰপাৰ্টিজ ব্যৱহাৰ কৰি একেবাৰে বহু কেবিনেট আৰু ৱাৰড্ৰবত মেটেৰিয়েল সলনি কৰক।
- ইউনিটত স্কাৰ্টিংৰ প্ৰকাৰ আৰু উচ্চতা নিৰ্ধাৰণ কৰকপ্ৰতিটো ইউনিটৰ বাবে কাঠৰ বা কাঠ-নহয় স্কাৰ্টিং বাছনি কৰক আৰু নিৰ্মাণৰ বিকল্পৰ পৰা স্কাৰ্টিংৰ উচ্চতা নিৰ্ধাৰণ কৰক।
- কেবিনেট নিৰ্মাণৰ সূত্ৰত পেনেলৰ বেধৰ প্ৰসংগকেঁচা সংখ্যা টাইপ নকৰি পৰামৰ্শৰ পৰা বেধ পেৰামিটাৰ বাছনি কৰি নিৰ্মাণ সূত্ৰত পেনেলৰ বেধৰ প্ৰসংগ দিয়ক।
- Clone and modify filler panels for both sides of a cabinetClone a filler panel and modify it so each side of a cabinet gets its own filler.
- কেবিনেট ছেটিংছত কেবিনেট স্কাৰ্টিং কনফিগাৰ কৰককেবিনেট কনফিগাৰেচনত কেবিনেট স্কাৰ্টিংৰ অপশ্যনসমূহ বিচাৰি উলিয়াওক।
- কেবিনেটত ড্ৰয়াৰ ছিষ্টেমসমূহে কেনেকৈ কাম কৰেLearn how drawer systems are configured at the drawer level, including choosing mechanism types and mixing hardware per drawer.
- এটা কেবিনেটৰ কাৰ্কাছ ফিনিছ সলনি কৰককেবিনেট স্তৰত কাৰ্কাছ ফিনিছ সলনি কৰিলে নিৰ্বাচিত কেবিনেটৰ সকলো কাৰ্কাছ পেনেল একেলগে আপডেট হয়, একে ধৰণৰ আন কেবিনেটত কোনো প্ৰভাৱ নপৰে।
- একেটা কেবিনেট কপি আৰু পেষ্ট কৰি একেধৰণৰ কেবিনেট সোনকালে সৃষ্টি কৰকপ্ৰথমে এটা কেবিনেট সম্পূৰ্ণৰূপে সমন্বয় কৰক, তাৰ পিছত ইয়াক কপি আৰু পেষ্ট কৰি প্ৰতিটো পৃথককৈ সমন্বয় কৰাতকৈ সোনকালে একাধিক একেধৰণৰ কেবিনেট সৃষ্টি কৰক।
- কেবিনেটৰ প্ৰতিটো পেনেলত এটা এজ বেণ্ড প্ৰয়োগ কৰককেবিনেট পৰ্যায়ত এটা এজ বেণ্ড যোগ কৰক, যাতে সেই কেবিনেটৰ প্ৰতিটো পেনেলত ই প্ৰয়োগ হয়।
- ৰান্ধনীঘৰৰ কেবিনেটৰ স্কাৰ্টিঙে মুঠ ইউনিটৰ উচ্চতাত কেনেকৈ প্ৰভাৱ পেলায়ৰান্ধনীঘৰৰ কেবিনেটত থকা প্ৰায় ১০০ মিমি স্কাৰ্টিঙে কেনেকৈ মাত্ৰাত দেখুওৱা কাৰ্কাছৰ উচ্চতাত যোগ হৈ মুঠ ইউনিটৰ উচ্চতা দিয়ে, সেয়া জানক।
- কেটেলগ ৱেৰহাউছৰ পৰা এটা কাষ্টম নিৰ্মাণ ইউনিট এটা ডিজাইনত যোগ কৰকৱেৰহাউছৰ এটা বেছ ইউনিট আপোনাৰ কেটেলগত আনক, যাতে ই design portal ৰ অধীনত furnish ত দেখুৱায়।
- ড্ৰপডাউন পুনৰ ব্যৱহাৰৰ বিকল্প ব্যৱহাৰ কৰি একাধিক কেবিনেট অংশত ফিনিছ প্ৰয়োগ কৰকলাইব্ৰেৰীৰ পৰা কেবিনেটৰ ফিনিছ সলনি কৰক, তাৰ পিছত ড্ৰপডাউনৰ জৰিয়তে কাৰ্কাছ এক্সটাৰ্নেল আৰু কাৰ্কাছ ইণ্টাৰ্নেলৰ দৰে অন্য অংশত সেই একেই ফিনিছ পুনৰ ব্যৱহাৰ কৰক।
- কেবিনেট স্তৰত শ্বাটাৰৰ ৰং আৰু পেনেল স্তৰত পেনেলৰ ফিনিছ সলনি কৰকএটা সম্পূৰ্ণ কেবিনেটৰ বাবে শ্বাটাৰৰ ৰং আৰু এটা পৃথক পেনেলৰ বাবে বাহ্যিক ফিনিছ নিৰ্ধাৰণ কৰক।
- কেবিনেটৰ সন্মুখ অতিক্ৰম কৰা ড্ৰয়াৰ এটা ঠিক কৰকবাহ্যিক ড্ৰয়াৰ এটাত Drawer Back Gap পৰীক্ষা কৰক, যাতে ড্ৰয়াৰটোৱে কেবিনেটৰ সন্মুখ অতিক্ৰম কৰা বন্ধ কৰে।
- ইউনিটৰ পৰা স্কাৰ্টিং আঁতৰাওকSkirting Visibility ৰ তলৰ সন্মুখৰ স্কাৰ্টিং বন্ধ কৰক, যাতে ইউনিটে আৰু সন্মুখত স্কাৰ্টিং নেদেখুৱায়।
- কেবিনেট আৰু আইলেণ্ড ৰন্ধনশালাৰ বাবে সঠিক elevation বাছনি কৰকআপোনাৰ ৰন্ধনশালাৰ বিন্যাসৰ সৈতে মিলা elevation পদ্ধতি বাছনি কৰক, তাৰ পিছত ড্ৰয়িঙত জোখ যোগ কৰক।
- স্লাইডিং শাটাৰযুক্ত ইউনিটত সংঘৰ্ষ কৰা ড্ৰয়াৰ ফিলাৰ আঁতৰাওকউল্লম্ব পাৰ্টিচন আৰু অতি বাওঁ বা সোঁফালে ড্ৰয়াৰ থকা স্লাইডিং শাটাৰযুক্ত ইউনিটত, Construction পেনেলৰ পৰা যি ফালৰ ফিলাৰে পৃথকে পৃথকে সংঘৰ্ষ কৰিব সেই ফালৰ ফিলাৰ আঁতৰাওক।
- ৱাৰ্ড্ৰবত ব্যৱহাৰযোগ্য ড্ৰয়াৰৰ গভীৰতা নিৰ্ণয় কৰককেবিনেটৰ গভীৰতাৰ পৰা শেল্ফ ৰিভিল, বেক পেনেল অফছেট, বেক পেনেলৰ বেধ আৰু ড্ৰয়াৰ ফেছিয়াৰ বেধ বিয়োগ কৰি ৱাৰ্ড্ৰব ড্ৰয়াৰৰ জোখ নিৰ্ণয় কৰক।
- ৱাল কেবিনেটৰ তলৰ পেনেলত ষ্ট্ৰিপ লাইট আৰু স্পটলাইট যোগ কৰকৱাল কেবিনেটৰ তলৰ পেনেলত ষ্ট্ৰিপ লাইট আৰু স্পটলাইট যোগ কৰি ইয়াক পোহৰাই তোলক।
- যিকোনো ইউনিট প্ৰকাৰত ফিংগাৰ গ্ৰুভ পেনেল হেণ্ডেল প্ৰয়োগ কৰকএটা ফিংগাৰ-গ্ৰুভ হেণ্ডেল যোগ কৰক যাতে ইয়াৰ গ্ৰুভ শ্বাটাৰত কাটা হয় আৰু কাৰ্কাছ সমন্বয় হয়, বেছ ইউনিট, টল ইউনিট আৰু ড্ৰয়াৰত একে ধৰণে।
- প্ৰতিটো কেবিনেটৰ বাবে হাৰ্ডৱেৰ নিয়মৰ জৰিয়তে ছাইট হাৰ্ডৱেৰ সংযুক্ত কৰকপ্ৰতিটো কেবিনেট আৰু ৱাৰড্ৰবত সঠিক হাৰ্ডৱেৰ সংযুক্ত কৰিবলৈ হাৰ্ডৱেৰ নিয়ম সৃষ্টি কৰক, তাৰ পিছত নিয়মটো পৰিষ্কাৰ কৰি সক্ৰিয় কৰি হিঞ্জ স্থাপন কৰক।
- একেলগে কেইবাটাও কেবিনেটৰ হেণ্ডেল সলনি কৰককেবিনেটবোৰ মাল্টি-চিলেক্ট কৰি প্ৰপাৰ্টিজ পেনেলত 'modify handle' অপচন ব্যৱহাৰ কৰি সিহঁতৰ হেণ্ডেল একেলগে সলনি কৰক।
- ইউনিট কনফিগাৰেচনত ৱাৰ্ড্ৰব শ্বটাৰৰ প্ৰকাৰ বাছনি কৰকহাতেৰে মডেল নকৰি ইউনিট কনফিগাৰেচনত উপলব্ধ শ্বটাৰ প্ৰকাৰসমূহৰ পৰা আপুনি প্ৰয়োজনীয় শ্বটাৰ বিন্যাস বাছনি কৰক।
- পাৰ্টিচন আৰু ৱাৰড্ৰবত শ্বেলফ ৰিভিল পৰিচালনা কৰকশ্বেলফ ৰিভিলে কেনেকৈ নেষ্টেড পাৰ্টিচনলৈ যায় আৰু একেলগে কেইবাটাও ৱাৰড্ৰবত কেনেকৈ প্ৰয়োগ কৰিব, সেয়া বুজি লওক।
- Remove a panel from a single unit's constructionTurn off a panel such as the bottom or back on the selected cabinet only, without touching the component definition.
- ড্ৰয়াৰ ইউনিটত ড্ৰয়াৰৰ পাৰ্শ্ব হ্ৰাস আৰু ফেছিয়া সম্প্ৰসাৰণ নিৰ্ধাৰণ কৰক3 Drawer Unit-ত ড্ৰয়াৰৰ নিজৰ পেনেল হ্ৰাস আৰু সম্প্ৰসাৰণ সমন্বয় কৰি ইয়াৰ ফেছিয়াৰ আকাৰ আৰু ৰূপ সলনি কৰক।
- এলিভেচন পছন্দসমূহত শ্বাটাৰৰ দিশ, ইউনিট আৰু শেলৰ টোকা সলনি কৰকএলিভেচন পছন্দসমূহত শ্বাটাৰৰ দিশ, ইউনিটৰ টোকা আৰু শেলৰ টোকা অন বা অফ কৰি কোনবোৰ এলিভেচন টোকা দেখুৱাব সেইটো নিয়ন্ত্ৰণ কৰক।
- ৱাৰড্ৰবত পৃথক বিভাজনসমূহৰ সৈতে কাম কৰকবিভক্ত ৱাৰড্ৰবৰ প্ৰতিটো বিভাজন নিজাকৈ বাছনি কৰক, যাতে কেৱল এটা অংশত শ্বাটাৰ যোগ কৰিব পাৰে বা আনবোৰত নোচোৱাকৈ তাৰ তাকবোৰ সলনি কৰিব পাৰে।
- কেবিনেট স্তৰত এখন অনুভূমিক কাষ্টম পেনেল যোগ কৰক আৰু ইয়াক ঘূৰাই দিয়ককেবিনেট-স্তৰৰ কাষ্টম পেনেল ব্যৱহাৰ কৰি এখন কেবিনেটত ওপৰৰ পেনেল যোগ কৰক, তাৰ পিছত এখন অনুভূমিক কাষ্টম পেনেল যোগ কৰি যিকোনো ঠাইত ৰাখক।
- স্লাইডিং ৱাৰড্ৰবত ড্ৰয়াৰ ছেট যোগ কৰকআপোনাৰ ডিজাইনত স্লাইডিং ৱাৰড্ৰবৰ বাবে ড্ৰয়াৰ ছেট কনফিগাৰ কৰক।
- এককৰ দুয়োফালে Add drawersপ্ৰথমে এটা উলম্ব পেনেল যোগ কৰক, তাৰ পিছত প্ৰতিফালে ড্ৰয়াৰ যোগ কৰক, যাতে ড্ৰয়াৰবোৰ এককটোৰ দুয়োফালে থাকিব পাৰে।
- কেবিনেট জ'নৰ ভিতৰত পাৰ্টিশ্বন আৰু গ্লাছ যোগ কৰককেবিনেট জ'নৰ ভিতৰৰ খালী ঠাইত পাৰ্টিশ্বন যোগ কৰি কেবিনেটৰ ভিতৰভাগ সমানে ভাগ কৰক।
- এটা কেবিনেটত শাটাৰ ব্যৱস্থা প্ৰয়োগ কৰককাষ্টমাইজ টেবৰ পৰা এটা ছুইং, শ্লাইডিং বা লিফ্ট-আপ শাটাৰ ব্যৱস্থা বাছি লৈ ইয়াক এটা কেবিনেটত প্ৰয়োগ কৰক।
- Modify Countertop ৰে কেইবাটাও ইউনিটত এটা কাউণ্টাৰটপ প্ৰয়োগ কৰককেইবাটাও কেবিনেট বাছনি কৰি এটা পপ-আপত সিহঁতৰ কাউণ্টাৰটপৰ ডাঠতা আৰু সামগ্ৰী একেলগে নিৰ্ধাৰণ কৰক।
- লেমিনেট ছলিড ব্যৱহাৰ কৰি কাউণ্টাৰটপ আৰু কেবিনেটৰ সামগ্ৰী সলনি কৰককাউণ্টাৰটপ পৰিবৰ্তন কৰি আৰু পৰিবৰ্তনবোৰ প্ৰয়োগ কৰি সামগ্ৰীৰ পৰিবৰ্তন নিশ্চিত কৰক।
- একসাথে একাধিক ইউনিটৰ হেণ্ডেল আৰু মেটেৰিয়েল সলনি কৰককেইবাটাও ইউনিট একেলগে বাছনি কৰি change material / interchange নিয়ন্ত্ৰণৰ জৰিয়তে এটা কাৰ্যতেই সিহঁতৰ ফিনিছ সলনি কৰক।
- সমগ্ৰ ডিজাইন আৰু ভৱিষ্যতৰ কেবিনেট সলনি কৰিবলৈ এটা কানেক্টৰ কাৰ্ড সম্পাদনা কৰকমূল কানেক্টৰটো সম্পাদনা কৰক যাতে সমগ্ৰ ডিজাইন আৰু ভৱিষ্যতৰ কেবিনেটসমূহ সলনি হয়।
- ইউনিটৰ সৈতে আকাৰ সলনি হোৱা বন্ধ কৰিবলৈ এখন পেনেলৰ জোখ স্থিৰ কৰকএখন পেনেলৰ দীঘ, গভীৰতা বা উচ্চতা এটা স্থিৰ মানলৈ ছেট কৰক, যাতে কেবিনেট বা ৱাৰড্ৰবৰ আকাৰ সলনি কৰিলেও সেই পেনেলৰ জোখ অপৰিৱৰ্তিত থাকে।
- কেবিনেটৰ উচ্চতাৰ লগত হিঞ্জৰ সংখ্যা আৰু অৱস্থান কেনেকৈ সলনি হয়কেবিনেটৰ উচ্চতাৰ পৰিসৰ অনুসৰি হাৰ্ডৱেৰ নিয়মে কেনেকৈ হিঞ্জৰ সংখ্যা আৰু স্থাপন নিৰ্ধাৰণ কৰে আৰু উচ্চতা সলনি হ'লে সেইবোৰ কেনেকৈ স্বয়ংক্ৰিয়ভাৱে আপডেট হয়, সেয়া শিকক।
- কেবিনেটত এটা কাষ্টম পেনেল স্থাপন কৰককেটেলগৰ পৰা বা Add Custom Panel ৰে এটা কাষ্টম পেনেল যোগ কৰক, ডেছড আউটলাইন অনুসৰণ কৰি ক্লিক কৰি ইয়াক নিশ্চিত কৰক।
- Set end panel depth to carcass level for open unitsStop the end panel at carcass level on a top unit that has no shutter so it aligns with the carcass.
- গোলকীয় পছন্দসমূহত কেবিনেট আৰু ৱাৰড্ৰবৰ বাবে প্ৰকল্পৰ মান নিৰ্ধাৰণ কৰকপ্ৰকল্প পৰ্যায়ত মূল সামগ্ৰী, ফিনিছ, শ্বাটাৰ আৰু হেণ্ডেল এবাৰ নিৰ্ধাৰণ কৰক, যাতে ইয়াৰ পিছত যোগ কৰা প্ৰতিটো কেবিনেট আৰু ৱাৰড্ৰবে সেই মানসমূহকে ডিফল্ট হিচাপে লয়।
- ব্লাইণ্ড কৰ্ণাৰ কেবিনেটত শ্বাটাৰৰ প্ৰস্থ নিৰ্ধাৰণ কৰকব্লাইণ্ড কৰ্ণাৰ কেবিনেটৰ শ্বাটাৰৰ প্ৰস্থ কেবিনেটৰ প্ৰস্থ, গভীৰতা আৰু উচ্চতাৰ লগত ক'ত আছে চাওক।
- পাৰ্টিচনসমূহ বুজি লওক আৰু এখন কেবিনেটৰ ভিতৰত শেল্ফ, পেনেল বা ড্ৰয়াৰ যোগ কৰকInfurnia ত পাৰ্টিচন কি সেই বিষয়ে জানক আৰু পাৰ্টিচন স্তৰত শেল্ফ, উলম্ব পেনেল বা ড্ৰয়াৰ যোগ কৰক।
- ৱাল ইউনিটৰ বাবে ৱাল গোলা প্ৰফাইল ব্যৱহাৰ কৰক, বেছ প্ৰফাইল নহয়ৱাল কেবিনেটত গোলা প্ৰফাইল যোগ কৰোঁতে ৱাল গোলা প্ৰফাইল বাছনি কৰক, কাৰণ ৱাল ইউনিটৰ বাবে বেছ প্ৰফাইল অনুপযুক্ত।
- স্কাৰ্টিং আৰু পেলমেটৰ বিকল্প বেছ নে ৱাল ইউনিটৰ ওপৰত নিৰ্ভৰ কৰে কিয়এটা কেবিনেটৰ মাউণ্টিং প্লেনে ইয়াক বেছ নে ৱাল ইউনিট হিচাপে কেনেকৈ নিৰ্ধাৰণ কৰে আৰু ইয়াৰ দ্বাৰা কোনবোৰ স্কাৰ্টিং, পেলমেট, কৰ্ণিছ আৰু ৰেইলৰ বিকল্প উপলব্ধ হয়, সেয়া জানি লওক।
- কন্ষ্ট্ৰাকচনৰ জৰিয়তে এটা ইউনিটৰ ভিতৰত পেৰামেট্ৰিক কাষ্টম পেনেল যোগ কৰকএটা ইউনিটৰ ভিতৰত অনুভূমিক ওপৰৰ পেনেল যোগ কৰক আৰু পেৰামেট্ৰিক সূত্ৰৰে ইয়াৰ আকাৰ আৰু অৱস্থান নিয়ন্ত্ৰণ কৰক।
- ৰান্ধনীঘৰৰ আচবাবৰ তালিকাৰ পৰা বেছ ইউনিট, ৱাল ইউনিট আৰু টল ইউনিট যোগ কৰককোঠাটো ৰান্ধনীঘৰ হিচাপে চিহ্নিত কৰক, যাতে Insert / Furnish ত ৰান্ধনীঘৰৰ আচবাবৰ অধীনৰ বেছ ইউনিট, ৱাল ইউনিট আৰু টল ইউনিটত সহজে প্ৰৱেশ কৰিব পাৰি।
- কেবিনেট গঠনত এণ্ড পেনেল যোগ বা আঁতৰাওকনিৰ্বাচিত ইউনিটৰ কেবিনেট গঠন ছেটিংছৰ পৰা বাওঁ বা সোঁ এণ্ড পেনেল যোগ বা আঁতৰাওক।
- ৱাৰড্ৰব নিৰ্মাণৰ অধীনত স্কাৰ্টিং উচ্চতা আৰু শাটাৰ প্ৰণালী সমন্বয় কৰকৱাৰড্ৰব নিৰ্মাণৰ বিকল্পসমূহৰ তৃতীয় টেবৰ পৰা ৱাৰড্ৰব আৰু মানক কেবিনেটৰ বাবে স্কাৰ্টিং উচ্চতা বা শাটাৰ প্ৰণালী সলনি কৰক।
- কেবিনেটৰ মুঠ প্ৰস্থৰ পৰা কাৰ্কাছৰ প্ৰস্থ গণনা কৰককেবিনেটৰ মুঠ প্ৰস্থ লৈ কাৰ্কাছ পেনেলৰ ডাঠতা দুবাৰ বিয়োগ কৰি কাৰ্কাছৰ প্ৰস্থ নিৰ্ণয় কৰক।
- কেবিনেটৰ চূড়ান্ত উচ্চতা গণনা কৰকউপাদানসমূহ শাৰী কৰিবলৈ মুঠ উচ্চতা পাবলৈ কেবিনেটৰ উচ্চতা, স্কাৰ্টিংৰ উচ্চতা আৰু কাউণ্টাৰটপৰ বেধ যোগ কৰক।
- চিলেকচন ট্ৰি বা ইউনিটৰ জৰিয়তে কাউণ্টাৰটপৰ সামগ্ৰী সলনি কৰকইউনিটটো বাছনি কৰি বা চিলেকচন ট্ৰি ব্যৱহাৰ কৰি, তাৰ পিছত এটা উপশ্ৰেণী আৰু এটা নিৰ্দিষ্ট সামগ্ৰী বা ৰং বাছনি কৰি কাউণ্টাৰটপৰ সামগ্ৰী সলনি কৰক।
- একক ইউনিট কেম ম'ডত পেনেল-পেনেল সংযোগসমূহ পৰীক্ষা কৰকএটা কেবিনেটৰ পেনেলসমূহৰ মাজৰ প্ৰতিটো সংযোগ পৰিস্থিতি, প্ৰতিটোৱে কোনবোৰ কানেক্টৰ কাৰ্ড ব্যৱহাৰ কৰে আৰু প্ৰকৃত ড্ৰিলসমূহ চাওক।
- admin portal ৰ জৰিয়তে কেবিনেটত কোনবোৰ হাৰ্ডৱেৰ নিয়ম প্ৰযোজ্য হয় পৰীক্ষা কৰককেবিনেটত প্ৰযোজ্য হাৰ্ডৱেৰ নিয়মবোৰ বিচাৰি উলিয়াওক আৰু সেইবোৰৰ চৰ্ত আৰু সেইবোৰে যোগ কৰা হাৰ্ডৱেৰ চাওক।
- আপুনি স্থাপন কৰা ইউনিট প্ৰকাৰৰ বাবে সঠিক পছন্দ গোট বাছনি কৰকস্থাপন কৰা ইউনিট প্ৰকাৰৰ সৈতে মিলা পছন্দ গোট বাছনি কৰক, যাতে বেছ ইউনিট, ৱাল ইউনিট, লফ্ট আৰু বহু-উদ্দেশ্য ইউনিটে কেবিনেট পছন্দ ব্যৱহাৰ কৰে আৰু ৱাৰড্ৰবে ৱাৰড্ৰব পছন্দ ব্যৱহাৰ কৰে।
- কেবিনেটৰ পৰা আৰম্ভ কৰি কাষ্টম বা ছেকচনেল এলিভেচন সৃষ্টি কৰককাষ্টম বা ছেকচনেল এলিভেচন সৃষ্টি কৰিবলৈ এটা নিৰ্দিষ্ট কেবিনেটৰ পৰা এলিভেচন আৰম্ভ কৰক।
- How a vertical gola handle is shared between two unitsSee how a vertical gola handle links two adjacent units, recesses both side panels, and what happens when it is removed.
- How countertops affect displayed base unit heightLearn why adding or removing a countertop on a base unit never changes the carcass height shown for that unit.
- কেবিনেটৰ অধীনত কাষ্টম পেনেলসমূহ কেনেকৈ তালিকাভুক্ত কৰা হয়আপুনি কাষ্টম পেনেল ক'ত যোগ কৰে তাৰ ওপৰত নিৰ্ভৰ কৰি সেয়া কোনটো কেবিনেটৰ অধীনত তালিকাভুক্ত হয় জানি লওক।
- How panel dimensions are driven by extensions and cabinet adjustmentsLearn how a panel's total thickness is calculated from its core and finishes, and how that calculation differs for pre-laminated and post-laminated core materials.
- কেবিনেটৰ বাহ্যিক আৰু আভ্যন্তৰীণ ফিনিছৰ সৈতে ফিনিছ মেটেৰিয়েল লিংক কৰকফিনিছ মেটেৰিয়েলৰ প্ৰপাৰ্টিত ইয়াৰ বাহ্যিক আৰু আভ্যন্তৰীণ ফিনিছ মেটেৰিয়েল লিংক কৰি কেবিনেটত ফিনিছ প্ৰয়োগ কৰক।
- ইউনিটত এটা উন্মুক্ত পাৰ্শ্ব পেনেল ছেট কৰকইউনিটটো পেনেল স্তৰত খোলক আৰু পেনেলটো উন্মুক্ত পেনেললৈ সলনি কৰক, কাৰণ ইয়াক ইউনিট-স্তৰৰ ডিফল্ট হিচাপে ছেট কৰিব নোৱাৰি।
- কেবিনেট স্থাপন কৰাৰ আগতে কাৰ্কাছৰ মূল আৰু পিছ-পেনেলৰ সামগ্ৰীৰ ডিফল্ট ছেট কৰককেবিনেট-স্তৰৰ পছন্দত কাৰ্কাছৰ মূল আৰু পিছ-পেনেলৰ মূলৰ সামগ্ৰী বাছনি কৰক, যাতে নতুন কেবিনেট সেইবোৰৰ সৈতে যোগ হয়।
- গোলা আৰু G-প্ৰফাইল কেবিনেটৰ বাবে ওপৰৰ পেনেলৰ জোখ নিৰ্ধাৰণ কৰকগোলা প্ৰফাইলে ওপৰৰ পেনেলক কেনেকৈ পিছফালে সৰকাই লৈ যায় আৰু G-প্ৰফাইলে কেনেকৈ ইয়াক কাৰ্কাছৰ জোখতে ৰাখে, সেয়া শিকক।
- কোণযুক্ত কেবিনেট আকৃতিৰ বাবে কাষ্টম পেনেল ব্যৱহাৰ কৰকষ্টেণ্ডাৰ্ড কেবিনেট পেনেল ঘূৰাই নিদি, সুকীয়া কাষ্টম পেনেল ব্যৱহাৰ কৰি কোণযুক্ত বা অমানক কেবিনেট আকৃতি সৃষ্টি কৰক।
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- ৱাৰড্ৰবৰ তলত তলৰ সহায়ক পেনেল যোগ কৰকতলৰ সহায়ক পেনেলৰ সংখ্যা আৰু উচ্চতা এনেকৈ নিৰ্ধাৰণ কৰক যাতে সেয়া প্লিন্থ অঞ্চলত কেবিনেটৰ তলৰ তলত সমানভাৱে থিয় হয়।
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- কেবিনেটৰ বাবে শুদ্ধ বাওঁ বা সোঁ এণ্ড পেনেল বাছনি কৰককেবিনেটত বাওঁ বা সোঁ এণ্ড পেনেল যোগ কৰক, এই কথা জানি যে ইউনিটৰ শ্বাটাৰবোৰৰ সন্মুখীন হৈ কোনটো দিশ নিৰ্ধাৰণ হয়।
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- স্বয়ংক্ৰিয় নিয়মসমূহে প্ৰতি ইউনিটত কেনেকৈ কাম কৰে আৰু পুনৰ প্ৰয়োগ কৰেস্বয়ংক্ৰিয় নিয়মসমূহ প্ৰতি ইউনিটত কেনেকৈ মূল্যায়ন কৰা হয়, প্ৰতিটো ৰানত পুনৰায় ৰিছেট আৰু প্ৰয়োগ কৰা হয়, আৰু কোনবোৰ ইউনিট আৰু পেনেল বাদ পৰে, সেয়া জানি লওক।
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3D ভিউত এটা ইউনিট আইছ'লেট কৰক আৰু QC এটা ৰুমলৈ সীমাবদ্ধ কৰকবেৰৰ বাধা নোহোৱাকৈ এটা ইউনিট ওচৰৰ পৰা পৰিদৰ্শন কৰক, তাৰ পিছত এটা ৰুমক নিজৰ কাৰ্য্য-পৰিসৰ দি কেৱল সেই ৰুমটোৰ বাবে QC চলাওক।
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
আৰু গাইড 10
সকলো দেখুৱাওক (10)
- বাল্ক এডিট ষ্ট্ৰাকচাৰৰ জৰিয়তে নিৰ্মাণ আৰু উৎপাদন ছেটিংছ প্ৰয়োগ কৰকবাল্ক এডিট ষ্ট্ৰাকচাৰ বিকল্প ব্যৱহাৰ কৰি কেবিনেট আৰু ৱাৰড্ৰবত নিৰ্মাণ আৰু উৎপাদন কনফিগাৰেচন ছেটিংছ প্ৰয়োগ কৰক।
- প্ৰশাসক-পৰ্টেলৰ নিয়মেৰে বা হাতেৰে সংযোগকাৰী যোগ কৰকadmin portalত এটা নিয়ম সংজ্ঞায়িত কৰি আমদানি কৰা মিল থকা কেবিনেটে স্বয়ংক্ৰিয়ভাৱে নিয়মটোৰ সংযোগকাৰী পায়, অথবা হাতেৰে যোগ কৰি সংযোগকাৰী যোগ কৰিব পাৰি।
- গোলা আৰু প্ৰফাইলৰ স্থাপনকেবিনেট মডেলিঙত গোলা আৰু প্ৰফাইল ক'ত প্ৰয়োগ কৰা হয় আৰু দুয়োখন একে কেবিনেটতে কেনেকৈ দেখা দিব পাৰে, সেয়া শিকক।
- নিৰ্মাণ কাষ্টমাইজৰ জৰিয়তে এটা হেঙিং ৰুট যোগ কৰকওপৰত নিৰ্মাণ কাষ্টমাইজেশ্যন খুলি, হেঙিং ৰুটৰ বিকল্প বাছনি কৰি কেটেলগৰ পৰা ইয়াক বাছনি কৰি ৱাৰড্ৰবত এটা হেঙিং ৰুট যোগ কৰক।
- Quick Access, Customize আৰু Construction ৰ মাজৰ পৰা বাছনি কৰকআপুনি যি পৰিৱৰ্তন কৰিব বিচাৰে তাৰ লগত মিলা কেবিনেট কাষ্টমাইজেশ্যন মেনু বাছনি কৰক, সেইটো নিয়মীয়া পৰিৱৰ্তন হওক বা উপাদান যোগ কৰা হওক।
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- শিডিউল, কম্পোজিট BOQ আৰু শিডিউল টেম্পলেট বুজি লওকশিডিউল-আধাৰিত আউটপুটে লুকুৱা আৰু ৱৰ্কস্কোপৰ পৰা বাদ দিয়া উপাদানসমূহ কেনেকৈ ব্যৱহাৰ কৰে, কেবিনেট কম্পোজিট BOQ কেনেকৈ প্ৰিণ্ট হয়, আৰু শিডিউলসমূহ কেনেকৈ সংৰক্ষণ আৰু ৰপ্তানি কৰিব লাগে শিকক।
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.