कॅबिनेट्स आणि मॉड्युलर युनिट्स
मार्गदर्शक: 298
- कॅबिनेटची रुंदी, खोली आणि उंची यात काय समाविष्ट नाही हे समजून घ्याशटर, काउंटरटॉप आणि स्कर्टिंग यांसारखे कोणते भाग टाकलेल्या मापांपेक्षा वेगळे जोडले जातात ते जाणून घ्या.
- कॅबिनेटची रचना, स्कर्टिंग, काउंटरटॉप आणि कार्कास पॅनेल सानुकूलित करानिवडलेल्या कॅबिनेटवर customize टॅब उघडून त्याची रचना, स्कर्टिंग, काउंटरटॉप आणि कार्कास पॅनेल सेट करा.
- उंच युनिटला घन तळाचे आणि काचेच्या वरच्या शटरमध्ये विभाजित करावरच्या शटरची यंत्रणा आणि पॅनेलचे कोअर मटेरियल सेट करून, घन तळाचे शटर आणि काचेचे वरचे शटर असलेले मिश्र उंच युनिट तयार करा.
- वॉर्डरोब आणि किचन कॅबिनेटच्या उंचीची तुलना करावॉर्डरोबच्या उंचीमध्ये स्कर्टिंगचा समावेश होतो, तर किचन कॅबिनेटची उंची फक्त कार्कास बॉक्सची असते, हे पहा.
- कॅबिनेटच्या डीफॉल्ट बांधणी पॅरामीटर्स तपासाबॅक पॅनल ग्रूव्हिंग, शटर रिडक्शन, शेल्फ रिव्हील, बॅक पॅनल ऑफसेट आणि बेस कॅबिनेट टॉपसाठी इन्फर्निया वापरत असलेली डीफॉल्ट मूल्ये जाणून घ्या.
- सानुकूल पॅनेल आणि पॅनेल डिझाइन संपादनांसह वक्र कॅबिनेट तयार कराकॅबिनेट स्तरावर सानुकूल पॅनेल जोडून, कार्कास पॅरामीटर्सवरून त्याचा आकार ठरवून आणि ते योग्यरित्या बसण्यासाठी त्याचे ऑफसेट समायोजित करून वक्र कॅबिनेट तयार करा.
- शेल्फ, ड्रॉवर आणि हँगर रॉडसह वॉर्डरोबचा आतील भाग तयार करावॉर्डरोबचा आतील भाग तयार करण्यासाठी योग्य क्रमाने शेल्फ, ड्रॉवर, व्हर्टिकल, हँगर रॉड आणि पुल-आउट हँगर रॉड जोडा.
- विभाजके, शेल्फ आणि ड्रॉवर सिस्टीम वापरून वॉर्डरोबचे अंतर्गत भाग तयार करावॉर्डरोबच्या विभाजकांच्या आत Add shelves, ड्रॉवर सिस्टीम आणि बांधणीचे पर्याय वापरून त्याचे अंतर्गत भाग तयार करा.
- शटर बदलून स्टँडर्ड वॉर्डरोबचे स्लायडिंग वॉर्डरोबमध्ये रूपांतर करासध्याचे शटर हटवून आणि दोन-दरवाजे किंवा तीन-दरवाजे स्लायडिंग म्हणून संरचित नवीन शटर सिस्टम जोडून स्टँडर्ड वॉर्डरोबचे स्लायडिंग वॉर्डरोबमध्ये रूपांतर करा.
- admin टॅबद्वारे कॅबिनेटचे कोअर मटेरियल बदलाadmin टॅबमधून कॅबिनेट किंवा कोपऱ्याच्या युनिटचे कोअर मटेरियल अपडेट करा आणि सेटिंग्ज कन्फर्म करा, जेणेकरून बदल निवडलेल्या युनिटवर लागू होईल.
- कॅबिनेट-स्तरावरील शटर आणि कार्कास फिनिश आणि कोअर सेट कराप्रॉपर्टीज पॅनेलमधून शटर आणि कार्कास फिनिश आणि कोअर मटेरियल निवडा, जेणेकरून इनहेरिटिंग शटर कॅबिनेटचे अनुसरण करतील.
- Change Materials द्वारे कॅबिनेटचे फिनिश, कोअर मटेरियल आणि एजबँड बदलाChange Materials वापरून प्रथम कॅबिनेटचे फिनिश आणि कोअर मटेरियल बदला, त्यानंतर त्याचे एजबँड बदला.
- डिझाइनमध्ये कॅबिनेटचे मागील, वरचे, खालचे आणि बाजूचे पॅनेल कॉन्फिगर कराप्रत्येक कॅबिनेट पॅनेल स्वतंत्रपणे कॉन्फिगर करा, जेणेकरून त्याचा आकार, मटेरियल, एज बँड, लायटिंग आणि हार्डवेअर तुम्हाला आवश्यक असलेल्या बांधणीशी जुळतील.
- अनेक युनिट्सवर 3 मिमी अंतर लागू कराएकाच वेळी अनेक युनिट्सवर प्रत्येक बाजूला 1.5 मिमी कपात आणि 3 मिमी शटर अंतर सेट करा.
- वॉल युनिटची उंची कशी मोजली जातेटाइलिंग, स्कर्टिंग, कॅबिनेट आणि ग्रॅनाइटच्या जाडीची बेरीज प्रत्यक्षात काय मोजते आणि वॉल युनिटची जमिनीपासूनची उंची कशी ठरते, ते जाणून घ्या.
- प्राधान्य बदलण्यापूर्वी जोडलेल्या युनिट्स अद्ययावत कराआधीच ठेवलेल्या कॅबिनेट्सना सध्याच्या प्राधान्यांशी जुळण्यासाठी शटर, कार्कास आणि बॅक-पॅनल कोअर मटेरियल पुन्हा लागू करा.
- वार्डरोबचे अंतर्गत भाग, ड्रॉवर संच आणि आरसे जोडाउभे विभाजक, शेल्फ, लटकवण्याचे साहित्य, ड्रॉवर संच आणि शटरचे आरसे जोडून वार्डरोबचा अंतर्गत भाग पूर्ण करा.
- कॅबिनेट आणि कोपऱ्यातील युनिट्सवर बांधणी शैली लागू कराबांधणी शैली कॅबिनेटसाठी आणि कोपऱ्यातील युनिट्ससाठी स्वतंत्रपणे परिभाषित केल्या जातात हे जाणून घ्या.
- सिस्टम संपादित करून शटर कॅबिनेटचे ड्रॉवर आणि बास्केटमध्ये रूपांतर कराशटर काढून आणि सिस्टम सानुकूलित करून एका शटरच्या कॅबिनेटचे विकर बास्केट आणि ड्रॉवर युनिटमध्ये बदला, नंतर ड्रॉवर आणि विभाजने जोडा, काढा आणि समायोजित करा.
- लॉफ्ट फ्रेम आणि बॉक्स घटक वापरून वॉर्डरोब लॉफ्ट तयार कराशटर सिस्टम रचनेद्वारे उघडण्याची दिशा समायोजित करा आणि उघडण्याची दिशा टॉगल करा.
- अनेक कॅबिनेटमध्ये गहाळ डोव्हेल, मिनीफिक्स किंवा PVC पाय दुरुस्त कराअनेक कॅबिनेटमध्ये डोव्हेल, मिनीफिक्स किंवा PVC पाय गहाळ असल्यास, लागू केलेल्या कन्स्ट्रक्शन स्टाईलमध्ये Remove All Connectors सुरू आहे का ते तपासा.
- अनेक कॅबिनेटचे elevations तयार करा आणि finishes एकत्र बदलाअनेक कॅबिनेट व्यापणारे elevations तयार करण्यासाठी कॅबिनेटचा 2D Drawings उघडा, नंतर त्यांचे materials आणि finishes एकाच कृतीत बदलण्यासाठी कॅबिनेट group-select करा.
- कॅबिनेटची रचना शटर, ड्रॉवर आणि अॅक्सेसरीजमध्ये कशी विभागली जातेकॅबिनेटची रचना शटर, ड्रॉवर आणि अॅक्सेसरीजमध्ये कशी विभागली जाते आणि शटर व ड्रॉवर सिस्टीम स्वतंत्रपणे कशा कॉन्फिगर केल्या जातात, ते जाणून घ्या.
- स्वयंपाकघरातील टॉल युनिटची उंची आणि खोली कशी मोजली जातेस्वयंपाकघरातील टॉल युनिटची उंची आणि खोली मोजताना त्याचे कोणते भाग वगळले जातात ते जाणून घ्या.
- वॉर्डरोबचे बाजूचे पॅनल जमिनीपर्यंत कसे पोहोचतातवॉर्डरोबचे बाजूचे पॅनल पूर्ण लांबीने जमिनीपर्यंत कसे जातात आणि पुढील स्कर्टिंगसाठी कटआउट का केला जातो, ते जाणून घ्या.
- फिनिश आणि एज-बँड सेटिंग्ज उघडण्यासाठी कॅबिनेट निवडात्याचे properties panel उघडण्यासाठी कॅबिनेट निवडा, नंतर Materials अंतर्गत त्याचे फिनिश, बॅक पॅनल कोअर आणि एज बँड सेट करा.
- कॅबिनेटच्या जागा उभ्या विभाजकांनी विभाजित कराजागा विभाजित करण्यासाठी आणि त्यांची रुंदी गुणोत्तराने किंवा स्पष्ट मूल्यांनी ठरवण्यासाठी Add vertical partitions वापरा.
- कॅबिनेटला प्रोफाइल हँडल किंवा हँडलविरहित दरवाज्यावर बदलाडिझाइन करतानाच कॅबिनेटला सामान्य हँडलवरून प्रोफाइल हँडल किंवा हँडलविरहित दरवाज्यावर थेट बदला; यासाठी वेगळा कॅटलॉग किंवा कन्स्ट्रक्शन सेटअप आवश्यक नाही.
- एक युनिट ठेवून, नंतर कॉपी व संरेखित करून किचन लेआउट तयार कराएक वॉल युनिट किंवा लॉफ्ट योग्य जागी ठेवा, नंतर उर्वरित युनिट कॉपी व संरेखित करून तुमचे किचन लेआउट तयार करा.
- वॉर्डरोबची रचना मॅन्युअली बदला आणि मागील स्कर्टिंग बंद करास्लायडिंग वॉर्डरोबसाठी त्याची रचना मॅन्युअली बदलून आणि मागील स्कर्टिंग बंद करून वॉर्डरोब सानुकूलित करा.
- फर्निचर मॉडेल लायब्ररीमधून ड्रेसर, टीव्ही आणि उंच युनिट ठेवातयार मॉडेल किंवा तुमची स्वतःची रचना वापरून ड्रेसर, टीव्ही आणि उंच युनिट ठेवा, नंतर ती बसवण्यासाठी समायोजित करा.
- कॅबिनेट ठेवण्यापूर्वी किंवा ठेवल्यानंतर फिरवाfurnish टूलमधून कॅबिनेट ठेवा आणि ते ठेवण्यापूर्वी space bar ने किंवा ठेवल्यानंतर rotate पर्यायाने फिरवा.
- प्रत्येक प्रोजेक्टसाठी कॅबिनेट आणि वॉर्डरोब प्राधान्ये सेट कराखाते-स्तरीय प्राधान्यांऐवजी प्रोजेक्टला स्वतःची कॅबिनेट आणि वॉर्डरोब मटेरियल डीफॉल्ट्स देण्यासाठी डिझाइनचे प्राधान्ये मेनू उघडा.
- सेंटर कॅबिनेटच्या बाजूच्या पॅनलची रचना समजून घ्यासेंटर कॅबिनेटचे बाजूचे पॅनल डीफॉल्टनुसार कसे बनवले जातात आणि डावे, उजवे, वरचे व खालचे पॅनल एकमेकांना कसे जोडले जातात ते जाणून घ्या.
- क्विक ॲक्सेस पॅनेलमधील किचन कॅबिनेटची उंची समजून घ्याकिचन कॅबिनेटच्या क्विक ॲक्सेस पॅनेलमधील उंची काय मोजते आणि ती संपादित केल्यास काय बदलते ते जाणून घ्या.
- कॅटलॉगमधून युनिट्स निवडून आणि टाकून कॅबिनेट जोडाकॅटलॉग उघडा, बेस युनिट श्रेणी निवडा आणि आवश्यक रुंदीचे कॅबिनेट निवडा, नंतर तुमची रचना तयार करण्यासाठी ते लेआउटमध्ये टाका.
- Add cabinets using FR enter and room templatesOpen the cabinet library with FR and enter, then place, rotate, resize and duplicate base or wall units.
- रिकाम्या कारकॅसमधून वॉर्डरोबचे अंतर्गत भाग स्वतः तयार कराकॅटलॉगमधून वॉर्डरोब पर्याय ठेवा आणि शेल्फ्स व उभ्या पॅनल्सने किंवा तयार विभाजन संरचनेने त्याचे अंतर्गत भाग स्वतः तयार करा.
- कॅबिनेटचा आकार बदला आणि मटेरियलच्या श्रेणी समजून घ्याप्रॉपर्टीज पॅनेलमधून कॅबिनेटचा आकार बदला आणि त्याचे मटेरियल कसे गटबद्ध केले जातात ते जाणून घ्या.
- शटर जोडण्यापूर्वी वॉर्डरोबला मुख्य विभाजने करून घ्याप्रथम वॉर्डरोबला मुख्य विभाजनांमध्ये विभागा, नंतर शेल्फ आणि उभ्या भागांसाठी त्यांचे उपविभाजन करा आणि त्यानंतर सानुकूलित यंत्रणांसह शटर सिस्टम जोडा.
- कॅबिनेट मॉड्यूलची रुंदी, उंची आणि खोलीची श्रेणी कशी लागू केली जातेप्रत्येक कॅबिनेट मॉड्यूलचा आकारमान नियम किमान आणि कमाल रुंदी, उंची आणि खोली कशी ठरवतो आणि डिझायनरना त्या मर्यादांमध्ये कसे ठेवतो ते जाणून घ्या.
- मानक बेस युनिटची परिमाणे कशी काम करतातकिचन मॉडेलिंगमध्ये वापरलेली मानक बेस युनिटची खोली आणि उंची काय आहेत आणि त्या मापांमध्ये काय समाविष्ट नाही, ते जाणून घ्या.
- फ्लोअर प्लॅनमध्ये किचन युनिट्स हलवा आणि फिरवाकिचन युनिट्स MV कमांड किंवा move tool ने हलवून आणि स्पेसबारने फिरवून भिंतींवर योग्यरित्या ठेवा.
- 2D आणि 3D दृश्यांमध्ये कॅबिनेट हलवाकॅबिनेट वर-खाली हलवा आणि 2D दृश्य किंवा 3D दृश्य यांपैकी कोणत्याही दृश्यात तिची जागा बदला.
- योग्य स्थाननिश्चितीसाठी फ्लोअर प्लॅनमध्ये कॅबिनेट ठेवाकॅबिनेट शेजारील कॅबिनेटला स्नॅप होतील अशा प्रकारे फ्लोअर प्लॅनमध्ये ठेवा आणि स्पेस बारने ती फिरवा.
- कॅबिनेटचे दुसऱ्या युनिट प्रकारात रूपांतर कराकॅबिनेटचे वेगळ्या प्रकारात रूपांतर करण्यासाठी नको असलेले पॅनेल बंद करा, आकार सेट करा आणि आतील विभागण्या जोडा.
- उंच युनिटवर उघडण्याची दिशा टॉगल करा आणि लिफ्ट-अप यंत्रणा सेट कराउंच युनिटची उघडण्याची दिशा टॉगल करा आणि त्याची यंत्रणा एका लिफ्ट-अप संरचनेवर सेट करा.
- Pricing Quotation मध्ये कॅबिनेट आणि ड्रॉवर चॅनल कसे दिसतात ते समजून घ्याBase Unit, Wall Unit आणि Tall Unit कॅबिनेटची लेबलिंग आणि यादी कशी होते, तसेच कोटेशनमध्ये ड्रॉवरचे चॅनल कसे मोजले जाते आणि त्याची किंमत कशी ठरते ते जाणून घ्या.
- वॉर्डरोबमध्ये स्वयंचलितपणे आकार बदलणाऱ्या तयार अंतर्गत रचना वापराcustomize पर्यायातून वॉर्डरोबच्या अंतर्गत रचना जोडा आणि एका शेल्फची उंची समायोजित करा, जेणेकरून उर्वरित शेल्फ स्वयंचलितपणे आकार बदलतील.
- कारकॅस पॅनल बांधणीने वॉर्डरोबची रचना कॉन्फिगर करावॉर्डरोबची रचना कॉन्फिगर करण्यासाठी आणि उभे पॅनल व ड्रॉवर यांसारखे आंतरिक व बाह्य घटक जोडण्यासाठी कारकॅस पॅनल बांधणी विभाग वापरा.
- Align Dimension सह एलिव्हेशनमधील मापन एककेएलिव्हेशनमध्ये एका युनिटचे कार्कास, पार्टिशन आणि शटर त्यांच्या कडांवरून निवडा आणि त्याच दिशेने साखळी मापने जोडा.
- प्रत्येक कॅबिनेट प्रकारासाठी दृश्य-विशिष्ट स्तर वापरून स्वतंत्र मजला आराखडे तयार कराप्रत्येक कॅबिनेट प्रकारास स्वतःचा आराखडा द्या, जेणेकरून बेस, वॉल आणि लॉफ्ट युनिट्स स्वतंत्रपणे प्रिंट होतील.
- वॉल कॅबिनेट हँगिंग ब्रॅकेटने वॉल कॅबिनेट लटकवावॉल कॅबिनेट लटकवण्यासाठी हार्डवेअर वेअरहाऊसमधील वॉल कॅबिनेट हँगिंग ब्रॅकेट वापरा.
- वार्डरोबची बांधणी शैली कारकास पॅरामीटर्स कशी साठवतेवार्डरोब युनिटची बांधणी शैली कोणते कारकास पॅरामीटर्स ठेवते आणि शैली अद्ययावत केल्यावर ते वार्डरोबवर कसे लागू होतात, ते जाणून घ्या.
- कारकॅस पॅनलची जाडी वापरून कॅबिनेटचा तळाचा पॅनल आतील बाजूस ऑफसेट करातळाचा पॅनल एका पॅनलच्या जाडीने वर करा, जेणेकरून तो बाजूच्या पॅनलच्या खाली न राहता कारकॅसच्या आत बसेल.
- Furnish आणि move tool द्वारे लॉफ्ट युनिट्स ठेवा आणि हलवाKitchen Furniture मधून लॉफ्ट युनिट्स ठेवा, बाण पर्याय किंवा move tool ने त्या हलवा, आणि आवश्यकतेनुसार बॉक्स लॉफ्ट्स जोडा किंवा त्यांचा आकार बदला.
- डिफॉल्ट 1 मिमी कॅबिनेट कपात समजून घ्याड्रॉवर-लेव्हल बांधणी अंतर्गत प्रत्येक कॅबिनेट चारही बाजूंनी डिफॉल्ट 1 मिमीने कसा कमी होतो ते जाणून घ्या.
- सिंक युनिटचे रेल्स आणि स्कर्टिंग पर्याय समजून घ्यासिंक युनिट्स वरच्या आणि मागच्या रेल्ससह कसे बनवले जातात आणि कॅबिनेट स्कर्टिंग पर्यायांमधून स्कर्टिंग कसे चालू किंवा बंद करायचे ते जाणून घ्या.
- कॅबिनेट, पार्टिशन, शटर आणि पॅनल नियंत्रणांपर्यंत पोहोचण्यासाठी सिलेक्शन ट्री वापरात्याच्या वरील स्तर दाखवण्यासाठी आणि आपल्याला आवश्यक असलेल्या नियंत्रणांवर थेट जाण्यासाठी कॅबिनेटचा भाग निवडा.
- एका क्लिकमध्ये वॉर्डरोबची मानक अंतर्गत रचना जोडावॉर्डरोबमध्ये तळाचा ड्रॉवर यांसारखी मानक रचना हाताने तयार न करता एका क्लिकमध्ये जोडा.
- दोन कॅबिनेटमध्ये उभी गोला प्रोफाइल जोडादोन्ही कॅबिनेट निवडा आणि त्यांच्यामध्ये उभी गोला प्रोफाइल जोडण्यासाठी डाव्या बाजूचे properties मेनू उघडा.
- योग्य स्तरावर furnish लायब्ररीमधून स्वयंपाकघरातील युनिट्स जोडास्वयंपाकघराच्या स्तरावर काम करताना furnish लायब्ररीमधून स्वयंपाकघरातील युनिट्स ठेवा, जेणेकरून ते योग्य उंचीवर बसतील.
- मॉड्युलर बेस, वॉल आणि ओपन युनिट्सपासून टीव्ही युनिट तयार कराFurnish पॅनेल उघडा, बहुउद्देशीय मॉड्युलर फर्निचर निवडा आणि टीव्ही युनिट तयार करण्यासाठी युनिट्स एकत्र करा, फिरवा आणि त्यांची जागा निश्चित करा.
- बेस युनिट्सवरून युनिटची रुंदी, खोली आणि उंची एकत्रितपणे बदलाबेस युनिट्स निवडा आणि त्यांची मापे एकत्रितपणे बदलण्यासाठी रुंदी, खोली आणि उंचीची मूल्ये संपादित करा.
- कॅबिनेट स्तरावर कॅबिनेटचा आतील रंग बदलाकॅबिनेट निवडा, कॅबिनेट स्तरावर जा आणि त्याचा आतील रंग सेट करा, जेणेकरून बदल कॅबिनेटच्या आतील भागावर लागू होईल.
- कन्स्ट्रक्शन आणि position फील्डद्वारे कॅबिनेट लॉक बदला किंवा त्याची जागा बदलाकॅबिनेट लॉकची जागा बदलण्यासाठी तो 3D मध्ये निवडा आणि त्याची position फील्ड समायोजित करा, कारण लॉक स्वतंत्र वस्तू नसून कॅबिनेटचा भाग आहे.
- मल्टि-सिलेक्शनने एकाच वेळी अनेक युनिट्स बदलाज्या युनिट्समध्ये एकच बदल व्हायला हवा त्या युनिट्सच निवडा, नंतर तो बदल त्यांच्यासाठी एकत्र लागू करा.
- अनेक वॉल युनिट्सची रचना एकाच वेळी बदलाकोपऱ्यातील युनिट्स वगळता सर्व वॉल युनिट्स निवडा, नंतर बल्क ॲक्शन वापरा आणि त्या एकत्र बदलण्यासाठी बल्क स्ट्रक्चर निवडा.
- फक्त विद्यमान कॅबिनेटसाठी कनेक्टर कार्डची प्रत तयार कराफक्त विद्यमान कॅबिनेटवर लागू होणारी सुधारित आवृत्ती तयार करण्यासाठी कनेक्टर कार्डची प्रत तयार करा.
- दोन कॅबिनेट एका वापरकर्ता घटकात एकत्र करादोन स्वतंत्र कॅबिनेट एका वापरकर्ता घटकात एकत्र करा, जो एकच एकक म्हणून वागेल.
- ब्लाइंड कॉर्नर युनिट्स उजव्या बाजूच्या किंवा डाव्या बाजूच्या पर्यायाने कॉन्फिगर कराब्लाइंड कॉर्नर युनिट योग्यरित्या कॉन्फिगर होण्यासाठी ती उजव्या बाजूच्या किंवा डाव्या बाजूच्या पर्यायावर सेट करा.
- Ctrl+C आणि Ctrl+V वापरून ठेवलेली वॉर्डरोब डुप्लिकेट कराठेवलेले वॉर्डरोब युनिट कॉपी करा आणि उर्वरित जागेत पेस्ट करा, नंतर स्थान समायोजित करण्यासाठी युनिट्स एकमेकांच्या मागे ड्रॅग करा.
- Edit connector कार्ड स्पेसिंग प्रति कॅबिनेट, सिंगल युनिट पॅनेल कॅम मोडमध्येफक्त एका कॅबिनेटसाठी कनेक्टर कार्ड स्पेसिंग बदला; इतर कोणत्याही कॅबिनेटवर परिणाम होणार नाही.
- वॉर्डरोबची रुंदी, उंची आणि खोली संपादित करावॉर्डरोबची रुंदी, उंची आणि खोली बदला आणि आतील मांडणी स्वयंचलितपणे जुळवून घेऊ द्या.
- SU शॉर्टकटने Single Unit CAM Mode प्रविष्ट करापॅनलसाठी Single Unit CAM Mode उघडण्यासाठी production design मध्ये SU कीबोर्ड शॉर्टकट वापरा.
- बहुउद्देशीय मॉड्युलर फर्निचरमध्ये TV बेस आणि TV ड्रॉवर युनिट्स शोधाबहुउद्देशीय मॉड्युलर फर्निचर विभागात सिंगल किंवा डबल डोअर आणि short, 450 किंवा 600 उंचीचे TV बेस आणि TV ड्रॉवर युनिट्स शोधा.
- लटकवण्याच्या विभागासाठी वॉर्डरोब हँगर्स शोधालटकवण्याच्या विभागातील विभाजक पातळीखालील सहाय्यक वस्तू म्हणून वॉर्डरोब हँगर्स शोधा, जिथे ब्रँड नसलेले हँगर्स स्टोअरमध्ये आधीच उपलब्ध आहेत.
- अनुमत मर्यादेबाहेर असलेली कॅबिनेटची रुंदी दुरुस्त कराअनुमत मर्यादेत कॅबिनेटची रुंदी प्रविष्ट करा, जेणेकरून सिस्टम रचना अवैध आहे अशी त्रुटी दाखवणे थांबवेल.
- तुमच्या 2D कॅबिनेट लेआउटवरून 3D मॉडेल तयार करा2D डिझाइन दृश्यात कॅबिनेट ठेवा आणि तुमच्या लेआउटवरून 3D मॉडेल स्वयंचलितपणे तयार होण्यासाठी 3D वर स्विच करा.
- कॅबिनेटचे मटेरियल गुणधर्म कसे सेट केले जातातकॅबिनेटचे मटेरियल गुणधर्म अनेक स्वतंत्र फील्डद्वारे सेट केले जातात, आणि शटरचा बाह्य फिनिश सामान्यतः उर्वरितपासून स्वतंत्रपणे निवडला जातो.
- 1800 मिमी पेक्षा जास्त उंचीच्या कॅबिनेट्सना लॉफ्ट युनिट म्हणून कसे मानले जातेAuto Presentation टेम्प्लेटची किमान उंची (elevation) आणि Loft detection स्विच यांवरून 1800 मिमी पेक्षा जास्त उंचीचे कॅबिनेट लॉफ्ट युनिट म्हणून मोजले जाते की नाही हे कसे ठरते ते जाणून घ्या.
- कॅबिनेटच्या किमान आणि कमाल आकारमान मर्यादा कशा काम करतातकॅबिनेटच्या रुंदी, उंची आणि खोलीवर किमान आणि कमाल आकारमान मर्यादा कशा लागू होतात आणि त्या कुठे संरचित केल्या जातात ते जाणून घ्या.
- admin portal मध्ये विद्यमान कॅबिनेट आयटम व्यवस्थापित आणि संपादित कराadmin portal मध्ये विद्यमान कॅबिनेट आयटम व्यवस्थापित आणि संपादित करा.
- किचन फर्निचर लायब्ररीमधून भिंत युनिट आणि उंच युनिट ठेवाकिचन फर्निचर लायब्ररीमधून भिंत युनिट किंवा उंच युनिट ठेवा आणि इतर कॅबिनेट प्रकारांप्रमाणेच ठेवण्याचे पर्याय वापरून त्याची मापे समायोजित करा.
- Y-अक्ष वापरून वॉल कॅबिनेटच्या वर लॉफ्ट ठेवालॉफ्ट वॉल युनिट्सच्या वर योग्यरीत्या बसण्यासाठी लॉफ्टचा Y-अक्ष वॉल कॅबिनेटच्या Y-अक्ष अधिक 600 मिमी इतका सेट करा.
- SKU संरचनेत बदल केल्यानंतर कॅशे रिफ्रेश करा आणि कॅबिनेट बदलाकॅटलॉगमधील SKU संरचना बदलल्यानंतर, कॅशे रिफ्रेश करा आणि design portal मधील कॅबिनेट बदला.
- कॅबिनेट फिरवा आणि तिची स्थिती व फिरणे सेट करानिवडलेली कॅबिनेट स्पेस बारने किंवा अचूक Y कोनाने फिरवा, पॅनेलचा फिनिश फिरवा आणि तळाच्या उंचीच्या तुलनेत Position Y योग्यरित्या वाचा.
- युनिट-स्तरीय बदल पॅनेलपर्यंत कसे पोहोचतात ते पहायुनिट-स्तरीय मटेरियल बदल कधी पॅनेलपर्यंत पोहोचतो आणि ऑटोमेशन नियम व लिंक केलेले SKU तो कसा ओव्हरराइड करू शकतात ते जाणून घ्या.
- साइझिंग नियमांद्वारे कॅबिनेटच्या किमान आणि कमाल आकारमानाची मर्यादा सेट करास्रोत मॉडेल आणि प्रशासकीय पोर्टलमध्ये साइझिंग नियम कॉन्फिगर करा, जेणेकरून कॅबिनेटची परिमाणे अनुमत मर्यादांच्या पलीकडे जाऊ शकणार नाहीत.
- कॅबिनेट किंवा पार्टिशनवर बाह्य आणि आंतरिक मर्यादांसाठी साइझिंग नियम सेट करायुनिटच्या मर्यादा त्याच्या बाह्य मापांवर लागू होतात की त्याच्या आंतरिक मोकळ्या जागेवर, ते निवडा आणि त्या एका वेळी एका युनिटवर किंवा एकत्रितपणे लागू करा.
- मजल्याच्या आराखड्यात कॅबिनेटची लेबल्स स्पष्टपणे दाखवामजल्याच्या आराखड्यात प्रत्येक कॅबिनेट त्याचे क्रमांकाचे लेबल दाखवते, आणि मजकूर इतर घटकांवर आच्छादित झाल्यास तुम्ही सानुकूल लीडर-शैलीचे लेबल जोडू शकता.
- कॅबिनेट, वॉर्डरोब आणि कस्टम पॅनल श्रेणी समजून घ्याInfurnia युनिट्सना तीन वेगळ्या श्रेणींमध्ये कसे आयोजित करते ते जाणून घ्या: कॅबिनेट, वॉर्डरोब आणि कस्टम पॅनल.
- वॉर्डरोब डिझाइन तयार करण्यासाठी FR शॉर्टकट वापराFR शॉर्टकटने वॉर्डरोब डिझाइन सुरू करा, नंतर दुहेरी स्विंग शटर ठेवा आणि कार्कासचे आतील घटक व्यवस्थापित करा.
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Add, space and remove stability rails on a cabinetAdd stability rails from the cabinet's property panel and let the system space them evenly between the bottom and top panels.
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- कॅबिनेट एडिटिंग पॅनेलच्या टॅबमध्ये सेटिंग्ज शोधाआपल्याला आवश्यक सेटिंगपर्यंत पोहोचण्यासाठी Quick Access, Customize आणि Construction टॅब आणि सिलेक्शन ट्री वापरा.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- कॅबिनेट स्तरांमध्ये कसे आयोजित केले जातेडिझाइन मॉड्यूलमधील कॅबिनेट कॅबिनेट, विभाजन, शटर सिस्टम आणि पॅनेल या स्तरांपासून तयार होते, आणि प्रत्येक स्तराची स्वतःची सेटिंग्ज असतात.
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- नवीन प्रकल्प कोणती एकके आणि अचूकता वापरतात ते जाणून घ्यानवीन प्रकल्प मिलिमीटरमध्ये मोजले जातात, 1 mm पर्यंत अचूकतेसह.
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs सेटिंग्जमध्ये युनिट आणि पॅनेल अॅनोटेशन्स पुन्हा नियुक्त करादोनपैकी एका मोडचा वापर करून तुमच्या आउटपुट्समधील युनिट आणि पॅनेल लेबल्स पुन्हा क्रमांकित करा; बदल पूर्ववत करता येणार नाही, म्हणून आधी पुष्टी करा.
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- कॅबिनेट फिरवण्यापूर्वी ते निवडाप्रथम कॅबिनेट निवडा, जेणेकरून ते फिरवल्यास ते त्याच्या बाउंडिंग बॉक्सबाहेर जाणार नाही.
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- फ्लोअर टाइलच्या अंतराच्या वर वॉल युनिटची तळाची उंची सेट कराबेस युनिट्स शून्य पातळीपासून 12 mm वर का ठेवली जातात हे जाणून घ्या, जेणेकरून वॉल युनिटची तळाची उंची मानक 1450 mm च्या 12 mm वर सेट होते.
- ब्लाइंड कॉर्नर युनिट आणि डमी पॅनल सेट कराशटर आणि नॉन-शटर फ्रंट पॅनल यांच्यामध्ये डमी पॅनल असलेली ब्लाइंड कॉर्नर युनिट तयार करा आणि तिची खोली सेट करा.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- एलिव्हेशन व्ह्यूमध्ये स्केलेटन मोडने कॅबिनेटचा आतील भाग दाखवाशटर लपवण्यासाठी आणि कॅबिनेटचे आतील पार्टिशन आणि कार्कास दाखवण्यासाठी एलिव्हेशन व्ह्यूमध्ये Turn on Skeleton mode वापरा, जेणेकरून तुम्ही त्यांना थेट डायमेन्शन करू शकता.
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- सिंगल युनिट मोडमध्ये फिल्टर वापरा आणि टक्कर स्वयंचलितपणे सोडवासिंगल युनिट मोडमध्ये टक्कर शोध चालवून, उल्लंघनांवर फिल्टर लावून आणि उजव्या-तळाच्या पर्यायांमधून ते सोडवून टक्कर सोडवा.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- विभाजन स्तर आणि ड्रॉवर संचाद्वारे कॅबिनेटमध्ये ड्रॉवर जोडाकॅबिनेटच्या विभाजन स्तरावरून कॅबिनेटमध्ये ड्रॉवर घाला, नंतर त्याची उंची सेट करा आणि आवश्यक असल्यास खाली शेल्फ जोडा.
- कॅबिनेट आणि वॉर्डरोबवरील शटर डिझाइन जतन करा आणि पुन्हा वापराInfurnia मध्ये शटर डिझाइन जतन करा आणि modify shutter design द्वारे ते कॅबिनेट आणि वॉर्डरोबवर लागू करा.
- युनिट्सना स्कर्टिंग जोडा आणि ती उजव्या बाजूंना दाखवानॉन-वुडन स्कर्टिंग सुरू करा, कार्कासची उंची योग्यरित्या सेट करा आणि प्रत्येक बाजूसाठी स्कर्टिंगची दृश्यता सक्षम करा.
- संपूर्ण कॅबिनेटला किंवा एका विभाजनाला शटर सिस्टम जोडाउघड्या कॅबिनेटला संपूर्णपणे किंवा फक्त एका विभाजनाला शटर सिस्टम जोडा.
- वॉर्डरोबमध्ये अंतर्गत ड्रॉवर जोडा आणि कॉन्फिगर कराविभाजनाची उंची ठरवून, ड्रॉवर अंतर्गत आणि बॉक्स प्रकारावर सेट करून, आणि फिलर शटरच्या जाडीशी जुळवून वॉर्डरोबमध्ये अंतर्गत ड्रॉवर जोडा.
- अनेक युनिट्सवर एकाच वेळी कोअर आणि मटेरियल बदल लागू कराबल्क एडिट, ग्रुप सिलेक्शन आणि कॉमन प्रॉपर्टीज वापरून अनेक कॅबिनेट्स आणि वॉर्डरोब्समधील मटेरियल एकाच वेळी बदला.
- युनिटवर स्कर्टिंगचा प्रकार आणि उंची सेट कराप्रत्येक युनिटसाठी लाकडी किंवा लाकडी नसलेले स्कर्टिंग निवडा आणि construction पर्यायांमधून स्कर्टिंगची उंची सेट करा.
- कॅबिनेटच्या बांधणीच्या सूत्रांमध्ये पॅनलच्या जाडीचा संदर्भकच्चे आकडे टाइप करण्याऐवजी सूचनांमधून जाडी पॅरामीटर निवडून बांधणीच्या सूत्रात पॅनलच्या जाडीचा संदर्भ द्या.
- Clone and modify filler panels for both sides of a cabinetClone a filler panel and modify it so each side of a cabinet gets its own filler.
- कॅबिनेट सेटिंग्जमध्ये कॅबिनेट स्कर्टिंग कॉन्फिगर कराकॅबिनेट कॉन्फिगरेशनमध्ये कॅबिनेट स्कर्टिंग पर्याय शोधा.
- कॅबिनेटमध्ये ड्रॉवर सिस्टीम कशा कार्य करतातड्रॉवर सिस्टीम ड्रॉवरच्या पातळीवर कशा संरचित केल्या जातात हे जाणून घ्या, यात मेकॅनिझमचे प्रकार निवडणे आणि प्रत्येक ड्रॉवरसाठी हार्डवेअर मिसळणे यांचा समावेश आहे.
- एका कॅबिनेटसाठी कार्कास फिनिश बदलाइतर समान प्रकारच्या कॅबिनेटवर परिणाम न करता, निवडलेल्या कॅबिनेटचे सर्व कार्कास पॅनेल एकत्र अद्ययावत करण्यासाठी कॅबिनेट स्तरावर कार्कास फिनिश बदला.
- समान कॅबिनेट पटकन तयार करण्यासाठी एक कॅबिनेट कॉपी करून पेस्ट कराप्रथम एक कॅबिनेट पूर्णपणे समायोजित करा, नंतर ती कॉपी करून पेस्ट करा जेणेकरून प्रत्येक कॅबिनेट स्वतंत्रपणे समायोजित करण्यापेक्षा अनेक समान कॅबिनेट जलद तयार होतील.
- Apply one edge band to every panel in a cabinetAdd an edge band at the cabinet level so it is applied to every panel in that cabinet.
- स्वयंपाकघरातील कॅबिनेटचा स्कर्टिंग एकूण युनिट उंचीवर कसा परिणाम करतोस्वयंपाकघरातील कॅबिनेटवरील सुमारे 100 मिमी स्कर्टिंग मापांमध्ये दाखवलेल्या कार्कासच्या उंचीमध्ये कसे जोडले जाते आणि एकूण युनिट उंची कशी मिळते, ते जाणून घ्या.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- ड्रॉपडाउन पुनर्वापर पर्याय वापरून अनेक कॅबिनेट भागांवर फिनिश लावालायब्ररीमधून कॅबिनेटची फिनिश बदला, नंतर ड्रॉपडाउनद्वारे तीच फिनिश कार्कास एक्स्टर्नल आणि कार्कास इंटर्नल यांसारख्या इतर भागांवर पुन्हा वापरा.
- कॅबिनेट स्तरावर शटरचा रंग आणि पॅनेल स्तरावर पॅनेलचा फिनिश बदलासंपूर्ण कॅबिनेटसाठी शटरचा रंग आणि वैयक्तिक पॅनेलसाठी बाह्य फिनिश सेट करा.
- कॅबिनेटच्या पुढच्या बाजूला ओलांडणारा ड्रॉवर दुरुस्त कराबाह्य ड्रॉवरवरील Drawer Back Gap तपासा, जेणेकरून ड्रॉवर कॅबिनेटच्या पुढच्या बाजूला ओलांडणे थांबेल.
- युनिटवरून स्कर्टिंग काढाSkirting Visibility अंतर्गत समोरील स्कर्टिंग बंद करा, जेणेकरून युनिट समोरील बाजूस स्कर्टिंग दाखवणार नाही.
- कॅबिनेट आणि आयलंड किचनसाठी योग्य एलिव्हेशन निवडातुमच्या किचन लेआउटशी जुळणारी एलिव्हेशन पद्धत निवडा, नंतर ड्रॉइंगमध्ये मापे जोडा.
- सरकत्या शटर असलेल्या युनिट्समध्ये अडथळा निर्माण करणारा ड्रॉवर फिलर काढाउभ्या विभाजकासह आणि अगदी डावीकडे किंवा उजवीकडे ड्रॉवर असलेल्या सरकत्या शटर असलेल्या युनिट्समध्ये, ज्या बाजूचा फिलर स्वतंत्रपणे अडथळा निर्माण करेल तो Construction पॅनेलमधून काढा.
- वॉर्डरोबमधील वापरण्यायोग्य ड्रॉवरची खोली काढाकॅबिनेटच्या खोलीतून शेल्फ रिव्हील, बॅक पॅनल ऑफसेट, बॅक पॅनलची जाडी आणि ड्रॉवर फॅशियाची जाडी वजा करून वॉर्डरोब ड्रॉवरचा आकार ठरवा.
- वॉल कॅबिनेटच्या तळाच्या पॅनलवर स्ट्रिप लाइट आणि स्पॉटलाइट जोडावॉल कॅबिनेटच्या तळाच्या पॅनलवर स्ट्रिप लाइट आणि स्पॉटलाइट जोडून त्या वॉल कॅबिनेटला प्रकाश द्या.
- कोणत्याही युनिट प्रकारावर फिंगर ग्रूव्ह पॅनेल हँडल लावाफिंगर-ग्रूव्ह हँडल जोडा जेणेकरून त्याचा ग्रूव्ह शटरमध्ये कोरला जाईल आणि कार्कास समायोजित होईल — बेस युनिट, टॉल युनिट आणि ड्रॉवर या सर्वांवर.
- हार्डवेअर नियमांद्वारे प्रत्येक कॅबिनेटसाठी साइट हार्डवेअर जोडाप्रत्येक कॅबिनेट आणि वॉर्डरोबला योग्य हार्डवेअर जोडणारे हार्डवेअर नियम तयार करा, नंतर नियम स्वच्छ करा आणि सक्रिय करा जेणेकरून बिजागर सेट होतील.
- अनेक कॅबिनेटवरील हँडल एकाच वेळी बदलाकॅबिनेट्स मल्टी-सिलेक्ट करा आणि त्यांची हँडल एकत्र बदलण्यासाठी properties panel मधील 'modify handle' पर्याय वापरा.
- युनिट कॉन्फिगरेशनमध्ये वॉर्डरोब शटरचे प्रकार निवडामॅन्युअली मॉडेलिंग करण्याऐवजी युनिट कॉन्फिगरेशनमध्ये उपलब्ध शटर प्रकारांमधून तुम्हाला आवश्यक असलेली शटर मांडणी निवडा.
- विभाजने आणि वॉर्डरोब्समध्ये शेल्फ रिव्हील व्यवस्थापित कराशेल्फ रिव्हील नेस्टेड विभाजनांपर्यंत कसे पोहोचते आणि एकाच वेळी अनेक वॉर्डरोब्सवर ते कसे लागू करायचे ते समजून घ्या.
- एका युनिटच्या रचनेतून पॅनल काढाकंपोनंट व्याख्येला हात न लावता, फक्त निवडलेल्या कॅबिनेटवर तळ किंवा मागच्या बाजूसारखे पॅनल बंद करा.
- Set drawer side reductions and fascia extensions in a drawer unitAdjust a drawer's own panel reductions and extensions to resize and reshape its fascia in a 3 Drawer Unit.
- एलिव्हेशन प्राधान्यांमध्ये शटरची दिशा, युनिट आणि शेल्फ ॲनोटेशन्स टॉगल कराएलिव्हेशन प्राधान्यांमध्ये शटरची दिशा, युनिट ॲनोटेशन्स आणि शेल्फ ॲनोटेशन्स चालू किंवा बंद करून कोणती एलिव्हेशन ॲनोटेशन्स दिसतील ते नियंत्रित करा.
- वॉर्डरोबमधील वेगळ्या विभाजनांसह काम कराविभाजित वॉर्डरोबमधील प्रत्येक विभाजन स्वतंत्रपणे निवडा, जेणेकरून तुम्ही फक्त एका विभागात शटर जोडू शकता किंवा इतरांना स्पर्श न करता त्याच्या शेल्फ बदलू शकता.
- कॅबिनेट स्तरावर आडवा सानुकूल पॅनेल जोडा आणि तो फिरवाकॅबिनेट-स्तरीय सानुकूल पॅनेल वापरून कॅबिनेटला वरचे पॅनेल जोडा, नंतर आडवे सानुकूल पॅनेल जोडा आणि ते कुठेही ठेवा.
- स्लायडिंग वॉर्डरोबमध्ये ड्रॉवर सेट जोडातुमच्या डिझाइनमधील स्लायडिंग वॉर्डरोबसाठी ड्रॉवर सेट कॉन्फिगर करा.
- Add drawers युनिटच्या दोन्ही बाजूंनाआधी उभा पॅनल जोडा, नंतर प्रत्येक बाजूला ड्रॉवर जोडा, जेणेकरून ड्रॉवर युनिटच्या दोन्ही बाजूंना बसू शकतील.
- कॅबिनेट झोनमध्ये विभाजक आणि काच जोडाकॅबिनेट झोनमधील रिकाम्या जागेत विभाजक जोडून कॅबिनेटचा आतील भाग समान भागांत विभागा.
- कॅबिनेटला शटर सिस्टम लागू कराकस्टमाइझ टॅबमधून स्विंग, स्लायडिंग किंवा लिफ्ट-अप शटर सिस्टम निवडा आणि ती कॅबिनेटला लागू करा.
- Modify Countertop वापरून अनेक युनिट्सना एकच काउंटरटॉप लागू कराअनेक कॅबिनेट्स निवडा आणि एकाच पॉप-अपमध्ये त्यांची काउंटरटॉप जाडी व सामग्री एकत्र सेट करा.
- लॅमिनेट सॉलिड्स वापरून काउंटरटॉप आणि कॅबिनेटचे मटेरियल बदलाकाउंटरटॉपमध्ये बदल करून आणि बदल लागू करून मटेरियल बदलाची पुष्टी करा.
- एकाच वेळी अनेक युनिट्ससाठी हँडल आणि मटेरियल बदलाअनेक युनिट्स एकत्र निवडा आणि change material / interchange नियंत्रण वापरून एकाच कृतीत त्यांचे फिनिश बदला.
- संपूर्ण डिझाइन आणि भविष्यातील कॅबिनेट्स बदलण्यासाठी कनेक्टर कार्ड संपादित करासंपूर्ण डिझाइन आणि भविष्यातील कॅबिनेट्स बदलण्यासाठी मूळ कनेक्टर संपादित करा.
- पॅनेलचे मापन स्थिर करा जेणेकरून ते युनिटसोबत आकार बदलणे थांबेलपॅनेलची लांबी, खोली किंवा उंची स्थिर मूल्यावर सेट करा जेणेकरून कॅबिनेट किंवा वॉर्डरोबचा आकार बदलल्यास त्या पॅनेलचा आकार बदलणार नाही.
- कॅबिनेटच्या उंचीनुसार बिजागरांची संख्या आणि स्थिती कशी बदलतेहार्डवेअर नियम कॅबिनेटच्या उंचीच्या श्रेणीनुसार बिजागरांची संख्या आणि स्थान कसे ठरवतात आणि उंची बदलल्यावर ते स्वयंचलितपणे कसे अद्ययावत होतात, ते जाणून घ्या.
- कॅबिनेटमध्ये सानुकूल पॅनल ठेवाकॅटलॉगमधून किंवा Add Custom Panel वापरून सानुकूल पॅनल जोडा, तुटलेल्या रेषेचा आराखडा अनुसरा आणि ते निश्चित करण्यासाठी क्लिक करा.
- खुल्या युनिट्ससाठी एंड पॅनलची खोली कारकास पातळीवर सेट कराशटर नसलेल्या टॉप युनिटवर एंड पॅनल कारकास पातळीवर थांबवा, जेणेकरून ते कारकासशी संरेखित होईल.
- Global Preferences मध्ये कॅबिनेट आणि वॉर्डरोबसाठी प्रकल्प मानके सेट कराप्रकल्प स्तरावर कोअर मटेरियल, फिनिश, शटर आणि हँडल एकदाच सेट करा, जेणेकरून नंतर तुम्ही जोडलेले प्रत्येक कॅबिनेट आणि वॉर्डरोब या मानकांनुसार डीफॉल्ट होईल.
- ब्लाइंड कॉर्नर कॅबिनेटवर शटरची रुंदी सेट कराब्लाइंड कॉर्नर कॅबिनेटची शटर रुंदी तिच्या कॅबिनेट रुंदी, खोली आणि उंचीसोबत कुठे दिसते ते पहा.
- कॅबिनेटमधील विभाजने समजून घ्या आणि त्यात शेल्फ, पॅनेल किंवा ड्रॉवर जोडाInfurnia मध्ये विभाजन म्हणजे काय ते जाणून घ्या आणि विभाजन स्तरावर शेल्फ, उभे पॅनेल किंवा ड्रॉवर जोडा.
- वॉल युनिटसाठी वॉल गोला प्रोफाइल वापरा, बेस प्रोफाइल नाहीवॉल कॅबिनेटला गोला प्रोफाइल जोडताना वॉल गोला प्रोफाइल निवडा, कारण बेस प्रोफाइल वॉल युनिटसाठी चुकीचा आहे.
- स्कर्टिंग आणि पेल्मेट पर्याय बेस युनिट किंवा वॉल युनिटवर का अवलंबून असतातकॅबिनेटचा माउंटिंग प्लेन त्याला बेस युनिट किंवा वॉल युनिट म्हणून कसा ठरवतो आणि त्यामुळे कोणते स्कर्टिंग, पेल्मेट, कॉर्निस आणि रेल पर्याय उपलब्ध होतात, ते जाणून घ्या.
- कन्स्ट्रक्शनद्वारे युनिटच्या आत पॅरामेट्रिक सानुकूल पॅनल जोडायुनिटच्या आत आडवे वरचे पॅनल जोडा आणि त्याचा आकार व स्थान पॅरामेट्रिक सूत्रांनी नियंत्रित करा.
- किचन फर्निचर कॅटलॉगमधून बेस युनिट, वॉल युनिट आणि टॉल युनिट जोडाखोलीला किचन म्हणून चिन्हांकित करा, जेणेकरून Insert / Furnish मधील किचन फर्निचर अंतर्गत बेस युनिट, वॉल युनिट आणि टॉल युनिट अधिक सहज उपलब्ध होतील.
- कॅबिनेटच्या बांधणीतून एंड पॅनल जोडा किंवा काढानिवडलेल्या युनिटच्या कॅबिनेट बांधणी सेटिंग्जमधून डावे किंवा उजवे एंड पॅनल जोडा किंवा काढा.
- वॉर्डरोब construction अंतर्गत स्कर्टिंग उंची आणि शटर सिस्टम समायोजित करावॉर्डरोब construction पर्यायांखालील तिसऱ्या टॅबमधून वॉर्डरोब आणि स्टँडर्ड कॅबिनेटसाठी स्कर्टिंग उंची किंवा शटर सिस्टम बदला.
- एकूण कॅबिनेट रुंदीवरून कार्कासची रुंदी काढाएकूण कॅबिनेट रुंदी घेऊन त्यातून कार्कास पॅनलची जाडी दोन वेळा वजा करून कार्कासची रुंदी काढा.
- Calculate the finished elevation of a cabinetAdd cabinet height, skirting height and countertop thickness to get the total elevation for aligning elements.
- निवड वृक्ष किंवा युनिटद्वारे काउंटरटॉपचे मटेरियल बदलायुनिट निवडून किंवा निवड वृक्ष वापरून, त्यानंतर उपश्रेणी आणि विशिष्ट मटेरियल किंवा रंग निवडून काउंटरटॉपचे मटेरियल बदला.
- सिंगल युनिट कॅम मोडमध्ये पॅनल-ते-पॅनल जोडण्या तपासाकॅबिनेटच्या पॅनलमधील प्रत्येक जोडणीचे दृश्य, प्रत्येकासाठी कोणते कनेक्टर कार्ड वापरले जाते आणि प्रत्यक्ष ड्रिल पहा.
- Check which hardware rules apply to a cabinet via admin portalFind the hardware rules that apply to a cabinet and look up their conditions and the hardware they add.
- तुम्ही ठेवत असलेल्या युनिट प्रकारासाठी योग्य प्राधान्य गट निवडाठेवल्या जात असलेल्या युनिट प्रकाराशी जुळणारा प्राधान्य गट निवडा, जेणेकरून बेस युनिट, वॉल युनिट, लॉफ्ट आणि बहुउद्देशीय युनिट कॅबिनेट प्राधान्ये वापरतील आणि वॉर्डरोब वॉर्डरोब प्राधान्ये वापरतील.
- कॅबिनेटपासून सुरुवात करून सानुकूल किंवा विभागीय एलिव्हेशन तयार करासानुकूल किंवा विभागीय एलिव्हेशन तयार करण्यासाठी विशिष्ट कॅबिनेटपासून एलिव्हेशन सुरू करा.
- दोन युनिट्समध्ये उभा गोला हँडल कसा सामायिक केला जातोउभा गोला हँडल दोन लगतच्या युनिट्सना कसा जोडतो, दोन्ही बाजूच्या पॅनल्समध्ये खाच कसा पाडतो आणि तो काढल्यावर काय होते ते पहा.
- काउंटरटॉप्स बेस युनिटच्या दाखवल्या जाणाऱ्या उंचीवर कसा परिणाम करतातबेस युनिटवर काउंटरटॉप जोडल्याने किंवा काढल्याने त्या युनिटसाठी दाखवली जाणारी कार्कसची उंची कधीही बदलत नाही, हे जाणून घ्या.
- कॅबिनेटखाली कस्टम पॅनल कसे सूचीबद्ध केले जाताततुम्ही कस्टम पॅनल कुठे जोडता यावरून ते कोणत्या कॅबिनेटखाली सूचीबद्ध होते ते जाणून घ्या.
- पॅनेलची परिमाणे एक्स्टेंशन्स आणि कॅबिनेट समायोजनांद्वारे कशी निर्धारित होतातपॅनेलची एकूण जाडी त्याच्या कोअर मटेरियल आणि फिनिशवरून कशी मोजली जाते, आणि प्री-लॅमिनेटेड व पोस्ट-लॅमिनेटेड कोअर मटेरियलसाठी ही गणना कशी वेगळी असते, हे जाणून घ्या.
- अंतर्गत आणि बाह्य फिनिशसह कॅबिनेटला फिनिश मटेरियल जोडाफिनिश मटेरियल प्रॉपर्टीजमध्ये कॅबिनेटचे बाह्य आणि अंतर्गत फिनिश मटेरियल जोडून कॅबिनेटला फिनिश लावा.
- युनिटवर उघडा बाजूचा पॅनल सेट करायुनिट पॅनल स्तरावर उघडा आणि पॅनल उघड्या पॅनलमध्ये बदला, कारण तो युनिट-स्तरीय डीफॉल्ट म्हणून सेट करता येत नाही.
- कॅबिनेट ठेवण्यापूर्वी कार्कासचा कोअर आणि मागील पॅनेलचा मटेरियल डीफॉल्ट सेट कराकॅबिनेट-स्तरीय प्राधान्यात कार्कासचा कोअर आणि मागील पॅनेलचा कोअर मटेरियल निवडा, जेणेकरून नवीन कॅबिनेट त्यांसह जोडले जातील.
- गोला आणि G-प्रोफाइल कॅबिनेटसाठी वरच्या पॅनलचा आकार ठरवागोला प्रोफाइल वरचे पॅनल मागच्या बाजूला कसे सरकवते आणि G-प्रोफाइल ते कार्कासच्या आकारात कसे ठेवते, ते जाणून घ्या.
- कोनीय कॅबिनेट आकारांसाठी सानुकूल पॅनेल वापरामानक कॅबिनेट पॅनेल फिरवण्याऐवजी स्वतंत्र सानुकूल पॅनेल वापरून कोनीय किंवा अमानक कॅबिनेट आकार तयार करा.
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- वॉर्डरोबखाली तळाचे आधार पॅनल जोडातळाच्या आधार पॅनलची संख्या आणि उंची अशी सेट करा की ते प्लिंथ भागात कॅबिनेटच्या तळाखाली समान रीतीने उभे राहतील.
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- कॅबिनेटसाठी योग्य डावा किंवा उजवा एंड पॅनेल निवडाकॅबिनेटला डावा किंवा उजवा एंड पॅनेल जोडा, हे लक्षात ठेवून की बाजू युनिटच्या शटर्सकडे तोंड करून ठरवली जाते.
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- ऑटोमेशन नियम प्रति युनिट कसे चालतात आणि पुन्हा लागू होतातऑटोमेशन नियम प्रति युनिट कसे तपासले जातात, प्रत्येक वेळी रीसेट होऊन पुन्हा लागू होतात, आणि कोणत्या युनिट्स आणि पॅनेल्स वगळले जातात ते जाणून घ्या.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3D view मध्ये युनिट वेगळे करा आणि QC एका खोलीपुरता मर्यादित कराभिंती अडवणार नाहीत अशा पद्धतीने युनिट जवळून तपासा, नंतर त्या खोलीला स्वतःचा work scope देऊन फक्त त्या एका खोलीसाठी QC चालवा.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
आणखी मार्गदर्शक 10
सर्व दाखवा (10)
- बल्क एडिट स्ट्रक्चरद्वारे कन्स्ट्रक्शन आणि मॅन्युफॅक्चरिंग सेटिंग्ज लागू कराबल्क एडिट स्ट्रक्चर पर्याय वापरून कॅबिनेट आणि वॉर्डरोबवर कन्स्ट्रक्शन आणि मॅन्युफॅक्चरिंग कॉन्फिगरेशन सेटिंग्ज लागू करा.
- प्रशासक-पोर्टल नियमांनुसार किंवा स्वतः कनेक्टर जोडाadmin portal मध्ये नियम परिभाषित करून, जेणेकरून जुळणाऱ्या आयात केलेल्या कॅबिनेटला त्या नियमाचे कनेक्टर स्वयंचलितपणे मिळतील, किंवा ते स्वतः जोडून कनेक्टर जोडा.
- गोला आणि प्रोफाइलची जागाकॅबिनेट मॉडेलिंगमध्ये गोला आणि प्रोफाइल कुठे लावले जातात आणि दोन्ही एकाच कॅबिनेटवर कसे दिसू शकतात ते जाणून घ्या.
- कन्स्ट्रक्शन कस्टमायझेशनद्वारे हँगिंग रूट जोडावॉर्डरोबमध्ये हँगिंग रूट जोडण्यासाठी वरच्या बाजूला कन्स्ट्रक्शन कस्टमायझेशन उघडा, हँगिंग रूट पर्याय निवडा आणि कॅटलॉगमधून तो निवडा.
- Quick Access, Customize आणि Construction यांपैकी निवडाPick the cabinet customization menu that matches the change you want to make, whether it is a regular change or adding elements.
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- शेड्यूल, संयुक्त BOQ आणि शेड्यूल टेम्पलेट्स समजून घ्याशेड्यूल-आधारित आउटपुट लपलेल्या आणि workscope-वगळलेल्या घटकांना कसे हाताळतात, कॅबिनेट संयुक्त BOQ कसे प्रिंट होते आणि शेड्यूल कसे जतन व निर्यात करायचे ते जाणून घ्या.
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.