ਕੈਬਿਨੈਟ ਅਤੇ ਮਾਡਿਊਲਰ ਯੂਨਿਟਾਂ
ਗਾਈਡਾਂ: 298
- ਸਮਝੋ ਕਿ ਕੈਬਿਨੈੱਟ ਦੀ ਚੌੜਾਈ, ਡੂੰਘਾਈ ਅਤੇ ਉਚਾਈ ਵਿੱਚ ਕੀ ਸ਼ਾਮਲ ਨਹੀਂ ਹੈਜਾਣੋ ਕਿ ਸ਼ਟਰ, ਕਾਊਂਟਰਟਾਪ ਅਤੇ ਸਕਰਟਿੰਗ ਵਰਗੇ ਕਿਹੜੇ ਹਿੱਸੇ ਦਿੱਤੇ ਮਾਪਾਂ ਤੋਂ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਜੋੜੇ ਜਾਂਦੇ ਹਨ।
- ਕੈਬਿਨੈੱਟ ਦੀ ਬਣਾਵਟ, ਸਕਰਟਿੰਗ, ਕਾਊਂਟਰਟਾਪ ਅਤੇ ਕਾਰਕਾਸ ਪੈਨਲਾਂ ਨੂੰ ਕਸਟਮਾਈਜ਼ ਕਰੋਚੁਣੇ ਹੋਏ ਕੈਬਿਨੈੱਟ 'ਤੇ customize ਟੈਬ ਖੋਲ੍ਹੋ ਅਤੇ ਇਸ ਦੀ ਬਣਾਵਟ, ਸਕਰਟਿੰਗ, ਕਾਊਂਟਰਟਾਪ ਅਤੇ ਕਾਰਕਾਸ ਪੈਨਲ ਸੈੱਟ ਕਰੋ।
- ਇੱਕ ਲੰਬੀ ਯੂਨਿਟ ਨੂੰ ਠੋਸ ਹੇਠਲੇ ਅਤੇ ਕੱਚ ਦੇ ਉੱਪਰਲੇ ਸ਼ਟਰਾਂ ਵਿੱਚ ਵੰਡੋਉੱਪਰਲੇ ਸ਼ਟਰ ਦਾ ਮਕੈਨਿਜ਼ਮ ਅਤੇ ਪੈਨਲ ਦੇ ਕੋਰ ਮਟੀਰੀਅਲ ਸੈੱਟ ਕਰਕੇ ਠੋਸ ਹੇਠਲੇ ਸ਼ਟਰ ਅਤੇ ਕੱਚ ਦੇ ਉੱਪਰਲੇ ਸ਼ਟਰ ਵਾਲੀ ਮਿਸ਼ਰਤ ਲੰਬੀ ਯੂਨਿਟ ਬਣਾਓ।
- ਵਾਰਡਰੋਬ ਅਤੇ ਰਸੋਈ ਕੈਬਿਨੈਟ ਦੀਆਂ ਉਚਾਈਆਂ ਦੀ ਤੁਲਨਾ ਕਰੋਦੇਖੋ ਕਿ ਵਾਰਡਰੋਬ ਦੀ ਉਚਾਈ ਵਿੱਚ ਸਕਰਟਿੰਗ ਕਿਵੇਂ ਸ਼ਾਮਲ ਹੈ, ਜਦਕਿ ਰਸੋਈ ਕੈਬਿਨੈਟ ਦੀ ਉਚਾਈ ਸਿਰਫ਼ ਕਾਰਕਸ ਬਾਕਸ ਹੈ।
- ਕੈਬਿਨੈਟ ਦੇ ਡਿਫਾਲਟ ਨਿਰਮਾਣ ਪੈਰਾਮੀਟਰ ਜਾਂਚੋਜਾਣੋ ਕਿ Infurnia ਬੈਕ ਪੈਨਲ ਗਰੂਵਿੰਗ, ਸ਼ਟਰ ਰਿਡਕਸ਼ਨ, ਸ਼ੈਲਫ ਰਿਵੀਲ, ਬੈਕ ਪੈਨਲ ਆਫਸੈੱਟ ਅਤੇ ਬੇਸ ਕੈਬਿਨੈਟ ਟਾਪ ਲਈ ਕਿਹੜੇ ਡਿਫਾਲਟ ਮੁੱਲ ਵਰਤਦਾ ਹੈ।
- Create a curved cabinet with a custom panel and panel design editsBuild a curved cabinet by adding a custom panel at cabinet level, sizing it from carcass parameters, and adjusting its offsets so it sits correctly.
- ਸ਼ੈਲਫਾਂ, ਡਰਾਅਰਾਂ ਅਤੇ ਹੈਂਗਰ ਰਾਡਾਂ ਨਾਲ ਵਾਰਡਰੋਬ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਬਣਾਓਵਾਰਡਰੋਬ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਬਣਾਉਣ ਲਈ ਸਹੀ ਕ੍ਰਮ ਵਿੱਚ ਸ਼ੈਲਫ, ਡਰਾਅਰ, ਵਰਟੀਕਲ, ਹੈਂਗਰ ਰਾਡ ਅਤੇ ਪੁਲ-ਆਉਟ ਹੈਂਗਰ ਰਾਡ ਸ਼ਾਮਲ ਕਰੋ।
- ਵੰਡਾਂ, ਸ਼ੈਲਫਾਂ ਅਤੇ ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਵਰਤ ਕੇ ਵਾਰਡਰੋਬ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਬਣਾਓਵਾਰਡਰੋਬ ਦੀਆਂ ਵੰਡਾਂ ਦੇ ਅੰਦਰ Add shelves, ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਅਤੇ ਬਣਾਵਟ ਦੇ ਵਿਕਲਪ ਵਰਤ ਕੇ ਇਸ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਬਣਾਓ।
- ਸ਼ਟਰ ਬਦਲ ਕੇ ਆਮ ਅਲਮਾਰੀ ਨੂੰ ਸਲਾਈਡਿੰਗ ਅਲਮਾਰੀ ਵਿੱਚ ਬਦਲੋਮੌਜੂਦਾ ਸ਼ਟਰ ਹਟਾ ਕੇ ਅਤੇ ਦੋ-ਦਰਵਾਜ਼ੇ ਜਾਂ ਤਿੰਨ-ਦਰਵਾਜ਼ੇ ਸਲਾਈਡਿੰਗ ਵਜੋਂ ਸੈੱਟ ਕੀਤਾ ਨਵਾਂ ਸ਼ਟਰ ਸਿਸਟਮ ਜੋੜ ਕੇ ਆਮ ਅਲਮਾਰੀ ਨੂੰ ਸਲਾਈਡਿੰਗ ਅਲਮਾਰੀ ਵਿੱਚ ਬਦਲੋ।
- ਐਡਮਿਨ ਟੈਬ ਰਾਹੀਂ ਕੈਬਿਨੈਟ ਦਾ ਕੋਰ ਮਟੀਰੀਅਲ ਬਦਲੋਐਡਮਿਨ ਟੈਬ ਤੋਂ ਕੈਬਿਨੈਟ ਜਾਂ ਕੋਨਰ ਯੂਨਿਟ ਦਾ ਕੋਰ ਮਟੀਰੀਅਲ ਅੱਪਡੇਟ ਕਰੋ ਅਤੇ ਸੈਟਿੰਗਾਂ ਦੀ ਪੁਸ਼ਟੀ ਕਰੋ ਤਾਂ ਜੋ ਬਦਲਾਅ ਚੁਣੀ ਯੂਨਿਟ 'ਤੇ ਲਾਗੂ ਹੋਵੇ।
- ਕੈਬਿਨੈੱਟ-ਪੱਧਰ ਦੇ ਸ਼ਟਰ ਅਤੇ ਕਾਰਕਾਸ ਫਿਨਿਸ਼ ਅਤੇ ਕੋਰ ਸੈੱਟ ਕਰੋਪ੍ਰਾਪਰਟੀ ਪੈਨਲ ਤੋਂ ਸ਼ਟਰ ਅਤੇ ਕਾਰਕਾਸ ਫਿਨਿਸ਼ ਅਤੇ ਕੋਰ ਮਟੀਰੀਅਲ ਚੁਣੋ ਤਾਂ ਜੋ ਵਿਰਾਸਤੀ ਸ਼ਟਰ ਕੈਬਿਨੈੱਟ ਦੀ ਪਾਲਣਾ ਕਰਨ।
- Change Materials ਰਾਹੀਂ ਕੈਬਿਨੈਟ ਦੇ ਫਿਨਿਸ਼, ਕੋਰ ਮਟੀਰੀਅਲ ਅਤੇ ਐਜਬੈਂਡ ਬਦਲੋChange Materials ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਪਹਿਲਾਂ ਕੈਬਿਨੈਟ ਦੇ ਫਿਨਿਸ਼ ਅਤੇ ਕੋਰ ਮਟੀਰੀਅਲ ਬਦਲੋ, ਫਿਰ ਇਸ ਦੇ ਐਜਬੈਂਡ ਬਦਲੋ।
- ਡਿਜ਼ਾਈਨ ਵਿੱਚ ਕੈਬਿਨੈੱਟ ਦੇ ਪਿਛਲੇ, ਉੱਪਰਲੇ, ਹੇਠਲੇ ਅਤੇ ਪਾਸਿਆਂ ਦੇ ਪੈਨਲ ਕਨਫਿਗਰ ਕਰੋਹਰ ਕੈਬਿਨੈੱਟ ਪੈਨਲ ਨੂੰ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਕਨਫਿਗਰ ਕਰੋ ਤਾਂ ਜੋ ਇਸ ਦਾ ਆਕਾਰ, ਸਮੱਗਰੀ, ਐਜ ਬੈਂਡ, ਲਾਈਟਿੰਗ ਅਤੇ ਹਾਰਡਵੇਅਰ ਤੁਹਾਡੀ ਲੋੜੀਂਦੀ ਬਣਾਵਟ ਨਾਲ ਮੇਲ ਖਾਵੇ।
- ਕਈ ਯੂਨਿਟਾਂ ਵਿੱਚ 3 mm ਦਾ ਖਾਲੀ ਥਾਂ ਲਾਗੂ ਕਰੋਕਈ ਯੂਨਿਟਾਂ ਉੱਤੇ ਇੱਕੋ ਵਾਰ ਹਰ ਪਾਸੇ 1.5 mm ਦੀ ਕਟੌਤੀ ਅਤੇ 3 mm ਦਾ ਸ਼ਟਰ ਖਾਲੀ ਥਾਂ ਸੈੱਟ ਕਰੋ।
- ਵਾਲ ਯੂਨਿਟ ਦੀ ਉਚਾਈ ਕਿਵੇਂ ਗਿਣੀ ਜਾਂਦੀ ਹੈਜਾਣੋ ਕਿ ਟਾਈਲਿੰਗ, ਸਕਰਟਿੰਗ, ਕੈਬਿਨੈਟ ਅਤੇ ਗ੍ਰੇਨਾਈਟ ਦੀ ਮੋਟਾਈ ਦਾ ਜੋੜ ਅਸਲ ਵਿੱਚ ਕੀ ਮਾਪਦਾ ਹੈ ਅਤੇ ਵਾਲ ਯੂਨਿਟ ਦੀ ਫ਼ਰਸ਼ ਤੋਂ ਉਚਾਈ ਕਿੱਥੋਂ ਆਉਂਦੀ ਹੈ।
- ਪਸੰਦ ਬਦਲਣ ਤੋਂ ਪਹਿਲਾਂ ਸ਼ਾਮਲ ਕੀਤੀਆਂ ਯੂਨਿਟਾਂ ਨੂੰ ਅੱਪਡੇਟ ਕਰੋਪਹਿਲਾਂ ਰੱਖੇ ਜਾ ਚੁੱਕੇ ਕੈਬਿਨੈਟਾਂ ਉੱਤੇ ਸ਼ਟਰ, ਕਾਰਕਾਸ ਅਤੇ ਬੈਕ-ਪੈਨਲ ਦੇ ਕੋਰ ਮਟੀਰੀਅਲ ਦੁਬਾਰਾ ਲਾਗੂ ਕਰੋ ਤਾਂ ਜੋ ਉਹ ਮੌਜੂਦਾ ਪਸੰਦਾਂ ਨਾਲ ਮੇਲ ਖਾਣ।
- ਵਾਰਡਰੋਬ ਦੇ ਅੰਦਰੂਨੀ ਹਿੱਸੇ, ਦਰਾਜ਼ ਸੈੱਟ ਅਤੇ ਸ਼ੀਸ਼ੇ ਸ਼ਾਮਲ ਕਰੋਵਾਰਡਰੋਬ ਦੇ ਅੰਦਰੂਨੀ ਹਿੱਸੇ ਨੂੰ ਪੂਰਾ ਕਰਨ ਲਈ ਲੰਬਵਤ ਪਾਰਟੀਸ਼ਨ, ਸ਼ੈਲਫਾਂ, ਲਟਕਾਉਣ ਵਾਲੇ ਸਹਾਇਕ ਉਪਕਰਣ, ਦਰਾਜ਼ ਸੈੱਟ ਅਤੇ ਸ਼ਟਰ ਸ਼ੀਸ਼ੇ ਸ਼ਾਮਲ ਕਰੋ।
- ਕੈਬਿਨੈੱਟਾਂ ਅਤੇ ਕੋਨੇ ਵਾਲੀਆਂ ਇਕਾਈਆਂ ਉੱਤੇ ਬਣਾਵਟ ਸਟਾਈਲ ਲਾਗੂ ਕਰੋਜਾਣੋ ਕਿ ਬਣਾਵਟ ਸਟਾਈਲ ਕੈਬਿਨੈੱਟਾਂ ਅਤੇ ਕੋਨੇ ਵਾਲੀਆਂ ਇਕਾਈਆਂ ਲਈ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਪਰਿਭਾਸ਼ਿਤ ਕੀਤੇ ਜਾਂਦੇ ਹਨ।
- ਸਿਸਟਮ ਨੂੰ ਸੋਧ ਕੇ ਸ਼ਟਰ ਕੈਬਿਨੈਟ ਨੂੰ ਦਰਾਜ਼ਿਆਂ ਅਤੇ ਟੋਕਰੀਆਂ ਵਿੱਚ ਬਦਲੋਸ਼ਟਰ ਹਟਾ ਕੇ ਅਤੇ ਸਿਸਟਮ ਨੂੰ ਅਨੁਕੂਲਿਤ ਕਰਕੇ ਇੱਕ ਸ਼ਟਰ ਵਾਲੇ ਕੈਬਿਨੈਟ ਨੂੰ ਵਿਕਰ ਟੋਕਰੀ ਅਤੇ ਦਰਾਜ਼ ਵਾਲੀ ਯੂਨਿਟ ਵਿੱਚ ਬਦਲੋ, ਫਿਰ ਦਰਾਜ਼ੇ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਸ਼ਾਮਲ ਕਰੋ, ਹਟਾਓ ਅਤੇ ਵਿਵਸਥਿਤ ਕਰੋ।
- ਲੌਫਟ ਫਰੇਮ ਅਤੇ ਬਾਕਸ ਕੰਪੋਨੈਂਟਾਂ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਵਾਰਡਰੋਬ ਲੌਫਟ ਬਣਾਓਸ਼ਟਰ ਸਿਸਟਮ ਕੰਸਟ੍ਰਕਸ਼ਨ ਰਾਹੀਂ ਖੁੱਲ੍ਹਣ ਦੀ ਦਿਸ਼ਾ ਸੈੱਟ ਕਰੋ ਅਤੇ ਖੁੱਲ੍ਹਣ ਦੀ ਦਿਸ਼ਾ ਟੌਗਲ ਕਰੋ।
- ਕਈ ਕੈਬਿਨੈਟਾਂ ਵਿੱਚ ਗੁੰਮ ਡੋਵਲ, ਮਿਨੀਫਿਕਸ ਜਾਂ PVC ਲੱਤਾਂ ਠੀਕ ਕਰੋਜੇ ਕਈ ਕੈਬਿਨੈਟਾਂ ਵਿੱਚ ਡੋਵਲ, ਮਿਨੀਫਿਕਸ ਜਾਂ PVC ਲੱਤਾਂ ਗੁੰਮ ਹਨ, ਤਾਂ ਜਾਂਚੋ ਕਿ ਲਾਗੂ ਕੀਤੀ ਕੰਸਟ੍ਰਕਸ਼ਨ ਸ਼ੈਲੀ ਵਿੱਚ Remove All Connectors ਚਾਲੂ ਹੈ ਜਾਂ ਨਹੀਂ।
- ਕਈ ਕੈਬਿਨੈੱਟਾਂ ਦੇ ਐਲੀਵੇਸ਼ਨ ਬਣਾਓ ਅਤੇ ਫਿਨਿਸ਼ਾਂ ਨੂੰ ਇੱਕੋ ਵਾਰ ਬਦਲੋਕਈ ਕੈਬਿਨੈੱਟਾਂ ਨੂੰ ਕਵਰ ਕਰਨ ਵਾਲੇ ਐਲੀਵੇਸ਼ਨ ਬਣਾਉਣ ਲਈ ਕਿਸੇ ਕੈਬਿਨੈੱਟ ਦਾ 2D Drawings ਖੋਲ੍ਹੋ, ਫਿਰ ਕੈਬਿਨੈੱਟਾਂ ਨੂੰ ਗਰੁੱਪ-ਚੁਣੋ ਤਾਂ ਜੋ ਉਨ੍ਹਾਂ ਦੇ ਮੈਟੀਰੀਅਲ ਅਤੇ ਫਿਨਿਸ਼ ਇੱਕੋ ਕਾਰਵਾਈ ਵਿੱਚ ਬਦਲੇ ਜਾ ਸਕਣ।
- ਕੈਬਿਨੈੱਟ ਦਾ ਢਾਂਚਾ ਸ਼ਟਰਾਂ, ਦਰਾਜ਼ਿਆਂ ਅਤੇ ਸਹਾਇਕ ਉਪਕਰਣਾਂ ਵਿੱਚ ਕਿਵੇਂ ਵੰਡਿਆ ਜਾਂਦਾ ਹੈਜਾਣੋ ਕਿ ਕੈਬਿਨੈੱਟ ਦਾ ਢਾਂਚਾ ਸ਼ਟਰਾਂ, ਦਰਾਜ਼ਿਆਂ ਅਤੇ ਸਹਾਇਕ ਉਪਕਰਣਾਂ ਵਿੱਚ ਕਿਵੇਂ ਵੰਡਿਆ ਜਾਂਦਾ ਹੈ, ਅਤੇ ਸ਼ਟਰ ਅਤੇ ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਨੂੰ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਕਿਵੇਂ ਸੰਰਚਿਤ ਕੀਤਾ ਜਾਂਦਾ ਹੈ।
- ਰਸੋਈ ਦੀ ਉੱਚੀ ਯੂਨਿਟ ਦੀ ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਕਿਵੇਂ ਮਾਪੀ ਜਾਂਦੀ ਹੈਜਾਣੋ ਕਿ ਰਸੋਈ ਦੀ ਉੱਚੀ ਯੂਨਿਟ ਦੇ ਕਿਹੜੇ ਹਿੱਸੇ ਇਸਦੀ ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਮਾਪਣ ਵੇਲੇ ਛੱਡ ਦਿੱਤੇ ਜਾਂਦੇ ਹਨ।
- ਵਾਰਡਰੋਬ ਦੇ ਸਾਈਡ ਪੈਨਲ ਫ਼ਰਸ਼ ਤੱਕ ਕਿਵੇਂ ਪਹੁੰਚਦੇ ਹਨਜਾਣੋ ਕਿ ਵਾਰਡਰੋਬ ਦੇ ਸਾਈਡ ਪੈਨਲ ਪੂਰੀ ਲੰਬਾਈ ਫ਼ਰਸ਼ ਤੱਕ ਕਿਵੇਂ ਜਾਂਦੇ ਹਨ ਅਤੇ ਅੱਗੇ ਵਾਲੀ ਸਕਰਟਿੰਗ ਲਈ ਕਟਾਉ ਕਿਉਂ ਕੀਤਾ ਜਾਂਦਾ ਹੈ।
- ਫਿਨਿਸ਼ ਅਤੇ ਕਿਨਾਰਾ-ਪੱਟੀ ਸੈਟਿੰਗਾਂ ਖੋਲ੍ਹਣ ਲਈ ਇੱਕ ਕੈਬਿਨੈੱਟ ਚੁਣੋਇੱਕ ਕੈਬਿਨੈੱਟ ਚੁਣੋ ਤਾਂ ਜੋ ਇਸਦਾ ਪ੍ਰਾਪਰਟੀ ਪੈਨਲ ਖੁੱਲ੍ਹੇ, ਫਿਰ Materials ਅਧੀਨ ਇਸਦੇ ਫਿਨਿਸ਼, ਪਿਛਲੇ ਪੈਨਲ ਦਾ ਕੋਰ ਅਤੇ ਕਿਨਾਰਾ-ਪੱਟੀਆਂ ਸੈੱਟ ਕਰੋ।
- ਕੈਬਿਨੈਟ ਦੀਆਂ ਥਾਵਾਂ ਨੂੰ ਖੜ੍ਹੇ ਪਾਰਟੀਸ਼ਨਾਂ ਨਾਲ ਵੰਡੋਕਿਸੇ ਥਾਂ ਨੂੰ ਵੰਡਣ ਅਤੇ ਉਨ੍ਹਾਂ ਦੀਆਂ ਚੌੜਾਈਆਂ ਅਨੁਪਾਤ ਜਾਂ ਸਪਸ਼ਟ ਮੁੱਲਾਂ ਨਾਲ ਸੈੱਟ ਕਰਨ ਲਈ Add vertical partitions।
- ਕੈਬਿਨੈਟ ਨੂੰ ਪ੍ਰੋਫਾਈਲ ਹੈਂਡਲ ਜਾਂ ਬਿਨਾਂ ਹੈਂਡਲ ਵਾਲੇ ਦਰਵਾਜ਼ੇ ਵਿੱਚ ਬਦਲੋਡਿਜ਼ਾਈਨ ਦੌਰਾਨ ਹੀ ਕੈਬਿਨੈਟ ਨੂੰ ਆਮ ਹੈਂਡਲਾਂ ਤੋਂ ਪ੍ਰੋਫਾਈਲ ਹੈਂਡਲਾਂ ਜਾਂ ਬਿਨਾਂ ਹੈਂਡਲ ਵਾਲੇ ਦਰਵਾਜ਼ੇ ਵਿੱਚ ਬਦਲੋ, ਬਿਨਾਂ ਕਿਸੇ ਵੱਖਰੇ ਕੈਟਾਲਾਗ ਜਾਂ ਕੰਸਟ੍ਰਕਸ਼ਨ ਸੈੱਟਅੱਪ ਦੇ।
- ਇੱਕ ਯੂਨਿਟ ਰੱਖ ਕੇ, ਫਿਰ ਕਾਪੀ ਅਤੇ ਸੰਰੇਖਿਤ ਕਰਕੇ ਰਸੋਈ ਦਾ ਲੇਆਉਟ ਬਣਾਓਇੱਕ wall unit ਜਾਂ loft ਸਹੀ ਥਾਂ 'ਤੇ ਰੱਖੋ, ਫਿਰ ਬਾਕੀ ਯੂਨਿਟਾਂ ਨੂੰ ਕਾਪੀ ਅਤੇ ਸੰਰੇਖਿਤ ਕਰਕੇ ਆਪਣਾ ਰਸੋਈ ਲੇਆਉਟ ਬਣਾਓ।
- ਅਲਮਾਰੀ ਦੀ ਬਣਾਵਟ ਨੂੰ ਹੱਥੀਂ ਬਦਲੋ ਅਤੇ ਪਿਛਲੀ ਸਕਰਟਿੰਗ ਬੰਦ ਕਰੋਸਲਾਈਡਿੰਗ ਅਲਮਾਰੀ ਲਈ ਇਸ ਦੀ ਬਣਾਵਟ ਨੂੰ ਹੱਥੀਂ ਬਦਲ ਕੇ ਅਤੇ ਪਿਛਲੀ ਸਕਰਟਿੰਗ ਬੰਦ ਕਰਕੇ ਅਲਮਾਰੀ ਨੂੰ ਅਨੁਕੂਲਿਤ ਕਰੋ।
- ਫਰਨੀਚਰ ਮਾਡਲ ਲਾਇਬ੍ਰੇਰੀ ਤੋਂ ਡ੍ਰੈਸਰ, ਟੀਵੀ ਅਤੇ ਟਾਲ ਯੂਨਿਟ ਰੱਖੋਪਹਿਲਾਂ ਤੋਂ ਬਣੇ ਮਾਡਲਾਂ ਜਾਂ ਆਪਣੇ ਡਿਜ਼ਾਈਨ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਡ੍ਰੈਸਰ, ਟੀਵੀ ਅਤੇ ਟਾਲ ਯੂਨਿਟ ਰੱਖੋ, ਫਿਰ ਉਹਨਾਂ ਨੂੰ ਫਿੱਟ ਕਰਨ ਲਈ ਸਮਾਯੋਜਿਤ ਕਰੋ।
- ਕੈਬਿਨੈਟ ਨੂੰ ਰੱਖਣ ਤੋਂ ਪਹਿਲਾਂ ਜਾਂ ਬਾਅਦ ਘੁਮਾਓfurnish ਟੂਲ ਵਿੱਚੋਂ ਕੈਬਿਨੈਟ ਰੱਖੋ ਅਤੇ ਰੱਖਣ ਤੋਂ ਪਹਿਲਾਂ ਸਪੇਸ ਬਾਰ ਨਾਲ ਜਾਂ ਰੱਖਣ ਤੋਂ ਬਾਅਦ rotate ਵਿਕਲਪ ਨਾਲ ਘੁਮਾਓ।
- ਹਰ ਪ੍ਰੋਜੈਕਟ ਲਈ ਕੈਬਿਨੈੱਟ ਅਤੇ ਵਾਰਡਰੋਬ ਦੀਆਂ ਪਸੰਦਾਂ ਸੈੱਟ ਕਰੋਖਾਤੇ-ਪੱਧਰੀ ਪਸੰਦਾਂ ਦੀ ਥਾਂ ਪ੍ਰੋਜੈਕਟ ਨੂੰ ਆਪਣੀਆਂ ਕੈਬਿਨੈੱਟ ਅਤੇ ਵਾਰਡਰੋਬ ਸਮੱਗਰੀ ਡਿਫਾਲਟ ਪਸੰਦਾਂ ਦੇਣ ਲਈ ਡਿਜ਼ਾਈਨ ਦਾ ਪਸੰਦਾਂ ਮੀਨੂ ਖੋਲ੍ਹੋ।
- ਸੈਂਟਰ ਕੈਬਿਨੈਟ ਸਾਈਡ ਪੈਨਲ ਦੀ ਬਣਾਵਟ ਨੂੰ ਸਮਝੋਜਾਣੋ ਕਿ ਸੈਂਟਰ ਕੈਬਿਨੈਟ ਦੇ ਸਾਈਡ ਪੈਨਲ ਡਿਫ਼ਾਲਟ ਰੂਪ ਵਿੱਚ ਕਿਵੇਂ ਬਣਦੇ ਹਨ ਅਤੇ ਖੱਬਾ, ਸੱਜਾ, ਉੱਪਰਲਾ ਅਤੇ ਹੇਠਲਾ ਪੈਨਲ ਇੱਕ ਦੂਜੇ ਨਾਲ ਕਿਵੇਂ ਜੁੜਦੇ ਹਨ।
- ਤੇਜ਼ ਪਹੁੰਚ ਪੈਨਲ ਵਿੱਚ ਰਸੋਈ ਕੈਬਿਨੈੱਟ ਦੀ ਉਚਾਈ ਨੂੰ ਸਮਝੋਜਾਣੋ ਕਿ ਰਸੋਈ ਕੈਬਿਨੈੱਟ ਦੇ ਤੇਜ਼ ਪਹੁੰਚ ਪੈਨਲ ਵਿੱਚ ਦਿਖਾਈ ਉਚਾਈ ਕੀ ਮਾਪਦੀ ਹੈ ਅਤੇ ਇਸਨੂੰ ਸੋਧਣ ਨਾਲ ਕੀ ਬਦਲਦਾ ਹੈ।
- ਕੈਟਾਲਾਗ ਵਿੱਚੋਂ ਯੂਨਿਟ ਚੁਣ ਕੇ ਅਤੇ ਡ੍ਰੌਪ ਕਰਕੇ ਕੈਬਿਨੈੱਟ ਸ਼ਾਮਲ ਕਰੋਕੈਟਾਲਾਗ ਖੋਲ੍ਹੋ, ਬੇਸ ਯੂਨਿਟ ਸ਼੍ਰੇਣੀ ਚੁਣੋ ਅਤੇ ਲੋੜੀਂਦੀ ਚੌੜਾਈ ਦਾ ਕੈਬਿਨੈੱਟ ਚੁਣੋ, ਫਿਰ ਆਪਣਾ ਡਿਜ਼ਾਈਨ ਬਣਾਉਣ ਲਈ ਇਸਨੂੰ ਲੇਆਉਟ ਵਿੱਚ ਡ੍ਰੌਪ ਕਰੋ।
- FR enter ਅਤੇ ਕਮਰੇ ਦੇ ਟੈਂਪਲੇਟਾਂ ਨਾਲ ਕੈਬਿਨੈਟ ਸ਼ਾਮਲ ਕਰੋFR ਅਤੇ enter ਨਾਲ ਕੈਬਿਨੈਟ ਲਾਇਬ੍ਰੇਰੀ ਖੋਲ੍ਹੋ, ਫਿਰ ਬੇਸ ਜਾਂ ਵਾਲ ਯੂਨਿਟ ਰੱਖੋ, ਘੁਮਾਓ, ਆਕਾਰ ਬਦਲੋ ਅਤੇ ਡੁਪਲੀਕੇਟ ਕਰੋ।
- ਖਾਲੀ ਕਾਰਕਸ ਤੋਂ ਵਾਰਡਰੋਬ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਆਪ ਬਣਾਓਕੈਟਾਲਾਗ ਵਿੱਚੋਂ ਵਾਰਡਰੋਬ ਦਾ ਇੱਕ ਵਿਕਲਪ ਰੱਖੋ ਅਤੇ ਸ਼ੈਲਫਾਂ ਅਤੇ ਖੜ੍ਹੇ ਪੈਨਲਾਂ ਨਾਲ ਜਾਂ ਤਿਆਰ ਪਾਰਟੀਸ਼ਨ ਸੰਰਚਨਾ ਨਾਲ ਇਸਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਆਪ ਬਣਾਓ।
- ਕੈਬਿਨੈੱਟ ਦਾ ਆਕਾਰ ਬਦਲੋ ਅਤੇ ਸਮੱਗਰੀ ਦੀਆਂ ਸ਼੍ਰੇਣੀਆਂ ਸਮਝੋਪ੍ਰਾਪਰਟੀ ਪੈਨਲ ਤੋਂ ਕੈਬਿਨੈੱਟ ਦਾ ਆਕਾਰ ਬਦਲੋ ਅਤੇ ਜਾਣੋ ਕਿ ਇਸ ਦੀਆਂ ਸਮੱਗਰੀਆਂ ਕਿਵੇਂ ਸਮੂਹਬੱਧ ਹਨ।
- ਸ਼ਟਰਾਂ ਨੂੰ ਜੋੜਨ ਤੋਂ ਪਹਿਲਾਂ ਵਾਰਡਰੋਬ ਨੂੰ ਮੁੱਖ ਪਾਰਟੀਸ਼ਨਾਂ ਵਿੱਚ ਵੰਡੋਪਹਿਲਾਂ ਵਾਰਡਰੋਬ ਨੂੰ ਮੁੱਖ ਪਾਰਟੀਸ਼ਨਾਂ ਵਿੱਚ ਵੰਡੋ, ਫਿਰ ਸ਼ੈਲਫਾਂ ਅਤੇ ਵਰਟੀਕਲਾਂ ਲਈ ਇਹਨਾਂ ਨੂੰ ਹੋਰ ਉਪ-ਵੰਡੋ, ਅਤੇ ਬਾਅਦ ਵਿੱਚ ਅਨੁਕੂਲਿਤ ਮਕੈਨਿਜ਼ਮਾਂ ਵਾਲੇ ਸ਼ਟਰ ਸਿਸਟਮ ਜੋੜੋ।
- ਕੈਬਿਨੈੱਟ ਮੌਡਿਊਲ ਦੀ ਚੌੜਾਈ, ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਦੀਆਂ ਹੱਦਾਂ ਕਿਵੇਂ ਲਾਗੂ ਹੁੰਦੀਆਂ ਹਨਜਾਣੋ ਕਿ ਹਰ ਕੈਬਿਨੈੱਟ ਮੌਡਿਊਲ ਦਾ ਸਾਈਜ਼ਿੰਗ ਨਿਯਮ ਘੱਟੋ-ਘੱਟ ਅਤੇ ਵੱਧ ਤੋਂ ਵੱਧ ਚੌੜਾਈ, ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਕਿਵੇਂ ਤੈਅ ਕਰਦਾ ਹੈ ਅਤੇ ਡਿਜ਼ਾਈਨਰਾਂ ਨੂੰ ਇਹਨਾਂ ਹੱਦਾਂ ਦੇ ਅੰਦਰ ਕਿਵੇਂ ਰੱਖਦਾ ਹੈ।
- ਮਿਆਰੀ ਬੇਸ ਯੂਨਿਟ ਮਾਪ ਕਿਵੇਂ ਕੰਮ ਕਰਦੇ ਹਨਰਸੋਈ ਮਾਡਲਿੰਗ ਵਿੱਚ ਵਰਤੀ ਜਾਂਦੀ ਮਿਆਰੀ ਬੇਸ ਯੂਨਿਟ ਡੂੰਘਾਈ ਅਤੇ ਉਚਾਈ ਬਾਰੇ ਜਾਣੋ ਅਤੇ ਇਹ ਮਾਪ ਕੀ ਛੱਡ ਦਿੰਦੇ ਹਨ।
- ਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਰਸੋਈ ਦੇ ਯੂਨਿਟਾਂ ਨੂੰ ਹਿਲਾਓ ਅਤੇ ਘੁਮਾਓਰਸੋਈ ਦੇ ਯੂਨਿਟਾਂ ਨੂੰ MV ਕਮਾਂਡ ਜਾਂ ਮੂਵ ਟੂਲ ਨਾਲ ਹਿਲਾ ਕੇ ਅਤੇ ਸਪੇਸਬਾਰ ਨਾਲ ਘੁਮਾ ਕੇ ਉਨ੍ਹਾਂ ਨੂੰ ਦੀਵਾਰਾਂ ਉੱਤੇ ਸਹੀ ਥਾਂ ਰੱਖੋ।
- 2D ਅਤੇ 3D ਵਿਊ ਵਿੱਚ ਕੈਬਿਨੈਟ ਹਿਲਾਓਕੈਬਿਨੈਟ ਨੂੰ ਉੱਪਰ ਅਤੇ ਹੇਠਾਂ ਹਿਲਾਓ ਅਤੇ 2D ਵਿਊ ਜਾਂ 3D ਵਿਊ ਵਿੱਚ ਇਸਨੂੰ ਮੁੜ ਥਾਂ ਦਿਓ।
- ਸਹੀ ਸਥਿਤੀ ਲਈ ਕੈਬਿਨੈਟ ਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਰੱਖੋਕੈਬਿਨੈਟ ਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਇਸ ਤਰ੍ਹਾਂ ਰੱਖੋ ਕਿ ਉਹ ਨਾਲ ਲੱਗਦੇ ਕੈਬਿਨੈਟਾਂ ਨਾਲ ਸਨੈਪ ਹੋ ਜਾਣ, ਅਤੇ ਸਪੇਸ ਬਾਰ ਨਾਲ ਉਨ੍ਹਾਂ ਨੂੰ ਘੁਮਾਓ।
- Repurpose a cabinet into another unit typeSwitch off unneeded panels, set the size and add internal divisions to turn a cabinet into a different type.
- ਉੱਚੇ ਯੂਨਿਟਾਂ ਉੱਤੇ ਖੁੱਲ੍ਹਣ ਦੀ ਦਿਸ਼ਾ ਟੌਗਲ ਕਰੋ ਅਤੇ ਲਿਫਟ-ਅੱਪ ਮਕੈਨਿਜ਼ਮ ਸੈੱਟ ਕਰੋਉੱਚੇ ਯੂਨਿਟ ਦੀ ਖੁੱਲ੍ਹਣ ਦੀ ਦਿਸ਼ਾ ਟੌਗਲ ਕਰੋ ਅਤੇ ਇਸਦਾ ਮਕੈਨਿਜ਼ਮ ਇੱਕ ਸਿੰਗਲ ਲਿਫਟ-ਅੱਪ ਸੰਰਚਨਾ ਉੱਤੇ ਸੈੱਟ ਕਰੋ।
- Understand how cabinets and drawer channels appear in the Pricing QuotationLearn how Base Unit, Wall Unit and Tall Unit cabinets are labelled and listed, and how a drawer's channel is counted and priced in the quotation.
- ਪਹਿਲਾਂ ਤੋਂ ਬਣੀਆਂ ਅੰਦਰੂਨੀ ਸੰਰਚਨਾਵਾਂ ਵਰਤੋ ਜੋ ਵਾਰਡਰੋਬ ਦੇ ਆਕਾਰ ਅਨੁਸਾਰ ਆਪਣੇ ਆਪ ਬਦਲ ਜਾਂਦੀਆਂ ਹਨਕਸਟਮਾਈਜ਼ ਵਿਕਲਪ ਰਾਹੀਂ ਵਾਰਡਰੋਬ ਦੀਆਂ ਅੰਦਰੂਨੀ ਸੰਰਚਨਾਵਾਂ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਇੱਕ ਸ਼ੈਲਫ ਦੀ ਉਚਾਈ ਬਦਲੋ ਤਾਂ ਜੋ ਬਾਕੀ ਸ਼ੈਲਫਾਂ ਆਪਣੇ ਆਪ ਆਕਾਰ ਬਦਲ ਲੈਣ।
- ਕਾਰਕਸ ਪੈਨਲ ਬਣਾਵਟ ਨਾਲ ਵਾਰਡਰੋਬ ਦਾ ਢਾਂਚਾ ਸੰਰਚਿਤ ਕਰੋਵਾਰਡਰੋਬ ਦਾ ਢਾਂਚਾ ਸੰਰਚਿਤ ਕਰਨ ਅਤੇ ਖੜ੍ਹੇ ਪੈਨਲਾਂ ਅਤੇ ਦਰਾਜ਼ਿਆਂ ਵਰਗੇ ਅੰਦਰੂਨੀ ਤੇ ਬਾਹਰੀ ਹਿੱਸੇ ਜੋੜਨ ਲਈ ਕਾਰਕਸ ਪੈਨਲ ਬਣਾਵਟ ਭਾਗ ਦੀ ਵਰਤੋਂ ਕਰੋ।
- ਇੱਕ ਐਲੀਵੇਸ਼ਨ ਵਿੱਚ ਮਾਪ ਇਕਾਈਆਂ, Align Dimension ਨਾਲਇੱਕ ਐਲੀਵੇਸ਼ਨ ਵਿੱਚ ਇੱਕ ਯੂਨਿਟ ਦਾ ਕਾਰਕਾਸ, ਪਾਰਟੀਸ਼ਨ ਅਤੇ ਸ਼ਟਰ ਉਹਨਾਂ ਦੇ ਕਿਨਾਰਿਆਂ ਰਾਹੀਂ ਚੁਣੋ ਅਤੇ ਇੱਕੋ ਦਿਸ਼ਾ ਵਿੱਚ ਮਾਪਾਂ ਦੀ ਚੇਨ ਬਣਾਓ।
- ਹਰ ਕੈਬਿਨੈੱਟ ਕਿਸਮ ਲਈ ਵੱਖਰੇ ਫਲੋਰ ਪਲਾਨ ਬਣਾਓ, ਵਿਊ-ਵਿਸ਼ੇਸ਼ ਲੇਅਰਾਂ ਦੀ ਵਰਤੋਂ ਕਰਕੇਹਰ ਕੈਬਿਨੈੱਟ ਕਿਸਮ ਨੂੰ ਆਪਣਾ ਪਲਾਨ ਦਿਓ ਤਾਂ ਜੋ ਬੇਸ, ਵਾਲ ਅਤੇ ਲੌਫਟ ਯੂਨਿਟ ਵੱਖਰੇ ਛਪਣ।
- ਵਾਲ ਕੈਬਿਨਟ ਹੈਂਗਿੰਗ ਬ੍ਰੈਕਟਾਂ ਨਾਲ ਵਾਲ ਕੈਬਿਨਟ ਲਟਕਾਓਵਾਲ ਕੈਬਿਨਟ ਲਟਕਾਉਣ ਲਈ ਹਾਰਡਵੇਅਰ ਵੇਅਰਹਾਊਸ ਤੋਂ ਵਾਲ ਕੈਬਿਨਟ ਹੈਂਗਿੰਗ ਬ੍ਰੈਕਟ ਵਰਤੋ।
- ਵਾਰਡਰੋਬ ਨਿਰਮਾਣ ਸ਼ੈਲੀ ਕਾਰਕਾਸ ਪੈਰਾਮੀਟਰ ਕਿਵੇਂ ਸੰਭਾਲਦੀ ਹੈਜਾਣੋ ਕਿ ਵਾਰਡਰੋਬ ਯੂਨਿਟ ਨਿਰਮਾਣ ਸ਼ੈਲੀ ਕਿਹੜੇ ਕਾਰਕਾਸ ਪੈਰਾਮੀਟਰ ਸੰਭਾਲਦੀ ਹੈ ਅਤੇ ਸ਼ੈਲੀ ਨੂੰ ਅੱਪਡੇਟ ਕਰਨ ਨਾਲ ਉਹ ਵਾਰਡਰੋਬ 'ਤੇ ਕਿਵੇਂ ਲਾਗੂ ਹੁੰਦੇ ਹਨ।
- ਕਾਰਕਾਸ ਪੈਨਲ ਮੋਟਾਈ ਵਰਤ ਕੇ ਕੈਬਿਨੈੱਟ ਦੇ ਹੇਠਲੇ ਪੈਨਲ ਨੂੰ ਅੰਦਰ ਵੱਲ ਆਫਸੈੱਟ ਕਰੋਹੇਠਲੇ ਪੈਨਲ ਨੂੰ ਇੱਕ ਪੈਨਲ ਮੋਟਾਈ ਜਿੰਨਾ ਉੱਪਰ ਚੁੱਕੋ ਤਾਂ ਜੋ ਇਹ ਸਾਈਡ ਪੈਨਲਾਂ ਦੇ ਹੇਠਾਂ ਦੀ ਬਜਾਏ ਕਾਰਕਾਸ ਦੇ ਅੰਦਰ ਆ ਜਾਵੇ।
- Furnish ਅਤੇ move ਟੂਲ ਰਾਹੀਂ ਲੌਫਟ ਯੂਨਿਟਾਂ ਰੱਖੋ ਅਤੇ ਹਿਲਾਓKitchen Furniture ਤੋਂ ਲੌਫਟ ਯੂਨਿਟਾਂ ਰੱਖੋ, ਉਹਨਾਂ ਨੂੰ arrow ਵਿਕਲਪਾਂ ਜਾਂ move ਟੂਲ ਨਾਲ ਹਿਲਾਓ, ਅਤੇ ਲੋੜ ਅਨੁਸਾਰ box ਲੌਫਟ ਸ਼ਾਮਲ ਕਰੋ ਜਾਂ ਉਹਨਾਂ ਦਾ ਆਕਾਰ ਬਦਲੋ।
- ਡਿਫਾਲਟ 1 mm ਕੈਬਿਨੈਟ ਕਟੌਤੀਆਂ ਨੂੰ ਸਮਝੋਜਾਣੋ ਕਿ ਡਿਫਾਲਟ ਤੌਰ 'ਤੇ ਡਰਾਅਰ-ਪੱਧਰ ਦੀ ਬਣਾਵਟ ਵਿੱਚ ਹਰ ਕੈਬਿਨੈਟ ਚਾਰੇ ਪਾਸਿਆਂ ਤੋਂ 1 mm ਕਿਵੇਂ ਘਟਾਇਆ ਜਾਂਦਾ ਹੈ।
- ਸਿੰਕ ਯੂਨਿਟ ਰੇਲਾਂ ਅਤੇ ਸਕਰਟਿੰਗ ਵਿਕਲਪਾਂ ਨੂੰ ਸਮਝੋਜਾਣੋ ਕਿ ਸਿੰਕ ਯੂਨਿਟ ਉੱਪਰਲੀ ਅਤੇ ਪਿਛਲੀ ਰੇਲ ਨਾਲ ਕਿਵੇਂ ਬਣਦੇ ਹਨ ਅਤੇ ਕੈਬਿਨੈੱਟ ਸਕਰਟਿੰਗ ਵਿਕਲਪਾਂ ਤੋਂ ਸਕਰਟਿੰਗ ਨੂੰ ਕਿਵੇਂ ਚਾਲੂ ਜਾਂ ਬੰਦ ਕਰਨਾ ਹੈ।
- ਕੈਬਿਨੈੱਟ, ਪਾਰਟੀਸ਼ਨ, ਸ਼ਟਰ ਅਤੇ ਪੈਨਲ ਕੰਟਰੋਲ ਤੱਕ ਪਹੁੰਚਣ ਲਈ ਚੋਣ ਰੁੱਖ ਦੀ ਵਰਤੋਂ ਕਰੋਕੈਬਿਨੈੱਟ ਦਾ ਕੋਈ ਹਿੱਸਾ ਚੁਣੋ ਤਾਂ ਕਿ ਇਸ ਤੋਂ ਉੱਪਰਲੇ ਪੱਧਰ ਦਿਸਣ ਅਤੇ ਤੁਸੀਂ ਸਿੱਧੇ ਲੋੜੀਂਦੇ ਕੰਟਰੋਲ ਤੱਕ ਪਹੁੰਚ ਸਕੋ।
- ਇੱਕ ਕਲਿੱਕ ਨਾਲ ਵਾਰਡਰੋਬ ਦੀ ਮਿਆਰੀ ਅੰਦਰੂਨੀ ਬਣਾਵਟ ਸ਼ਾਮਲ ਕਰੋਵਾਰਡਰੋਬ ਵਿੱਚ ਹੇਠਲੇ ਦਰਾਜ਼ੇ ਵਰਗੀ ਮਿਆਰੀ ਬਣਾਵਟ ਨੂੰ ਹੱਥੋਂ ਬਣਾਉਣ ਦੀ ਬਜਾਏ ਇੱਕ ਕਲਿੱਕ ਨਾਲ ਸ਼ਾਮਲ ਕਰੋ।
- ਦੋ ਕੈਬਿਨੈਟਾਂ ਵਿਚਕਾਰ ਇੱਕ ਵਰਟੀਕਲ ਗੋਲਾ ਪ੍ਰੋਫਾਈਲ ਸ਼ਾਮਲ ਕਰੋਦੋਵੇਂ ਕੈਬਿਨੈਟ ਚੁਣੋ ਅਤੇ ਉਹਨਾਂ ਵਿਚਕਾਰ ਇੱਕ ਵਰਟੀਕਲ ਗੋਲਾ ਪ੍ਰੋਫਾਈਲ ਸ਼ਾਮਲ ਕਰਨ ਲਈ ਖੱਬੇ ਪਾਸੇ ਪ੍ਰਾਪਰਟੀਜ਼ ਮੀਨੂ ਖੋਲ੍ਹੋ।
- ਸਹੀ ਲੈਵਲ 'ਤੇ ਫਰਨਿਸ਼ ਲਾਇਬ੍ਰੇਰੀ ਤੋਂ ਰਸੋਈ ਯੂਨਿਟ ਸ਼ਾਮਲ ਕਰੋਰਸੋਈ ਲੈਵਲ 'ਤੇ ਕੰਮ ਕਰਦਿਆਂ ਫਰਨਿਸ਼ ਲਾਇਬ੍ਰੇਰੀ ਤੋਂ ਰਸੋਈ ਯੂਨਿਟ ਰੱਖੋ, ਤਾਂ ਜੋ ਉਹ ਸਹੀ ਉਚਾਈ 'ਤੇ ਆਉਣ।
- ਮਾਡਿਊਲਰ ਬੇਸ, ਵਾਲ ਅਤੇ ਖੁੱਲ੍ਹੀਆਂ ਯੂਨਿਟਾਂ ਤੋਂ ਟੀਵੀ ਯੂਨਿਟ ਬਣਾਓFurnish ਪੈਨਲ ਖੋਲ੍ਹੋ, ਬਹੁ-ਮਕਸਦ ਮਾਡਿਊਲਰ ਫਰਨੀਚਰ ਚੁਣੋ, ਅਤੇ ਟੀਵੀ ਯੂਨਿਟ ਬਣਾਉਣ ਲਈ ਯੂਨਿਟਾਂ ਨੂੰ ਮਿਲਾਓ, ਘੁਮਾਓ ਅਤੇ ਰੱਖੋ।
- ਬੇਸ ਯੂਨਿਟਾਂ ਤੋਂ ਯੂਨਿਟ ਦੀ ਚੌੜਾਈ, ਡੂੰਘਾਈ ਅਤੇ ਉਚਾਈ ਨੂੰ ਬਲਕ ਵਿੱਚ ਬਦਲੋਬੇਸ ਯੂਨਿਟਾਂ ਚੁਣੋ ਅਤੇ ਉਨ੍ਹਾਂ ਦੇ ਆਕਾਰ ਬਲਕ ਵਿੱਚ ਬਦਲਣ ਲਈ ਚੌੜਾਈ, ਡੂੰਘਾਈ ਅਤੇ ਉਚਾਈ ਦੇ ਮੁੱਲ ਸੋਧੋ।
- ਕੈਬਿਨੈੱਟ ਪੱਧਰ 'ਤੇ ਕੈਬਿਨੈੱਟ ਦਾ ਅੰਦਰੂਨੀ ਰੰਗ ਬਦਲੋਇੱਕ ਕੈਬਿਨੈੱਟ ਚੁਣੋ, ਕੈਬਿਨੈੱਟ ਪੱਧਰ 'ਤੇ ਜਾਓ ਅਤੇ ਇਸਦਾ ਅੰਦਰੂਨੀ ਰੰਗ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਬਦਲਾਅ ਕੈਬਿਨੈੱਟ ਦੇ ਅੰਦਰੂਨੀ ਹਿੱਸਿਆਂ 'ਤੇ ਲਾਗੂ ਹੋਵੇ।
- ਕੰਸਟ੍ਰਕਸ਼ਨ ਅਤੇ position ਫੀਲਡਾਂ ਰਾਹੀਂ ਕੈਬਿਨੇਟ ਲਾਕ ਬਦਲੋ ਜਾਂ ਮੁੜ-ਸਥਿਤ ਕਰੋਕੈਬਿਨੇਟ ਲਾਕ ਨੂੰ 3D ਵਿੱਚ ਚੁਣ ਕੇ ਅਤੇ ਇਸ ਦੀਆਂ position ਫੀਲਡਾਂ ਨੂੰ ਸਮਾਯੋਜਿਤ ਕਰਕੇ ਮੁੜ-ਸਥਿਤ ਕਰੋ, ਕਿਉਂਕਿ ਲਾਕ ਕੈਬਿਨੇਟ ਦਾ ਹਿੱਸਾ ਹੈ, ਆਜ਼ਾਦ ਖੜ੍ਹੀ ਵਸਤੂ ਨਹੀਂ।
- ਮਲਟੀ-ਸਿਲੈਕਸ਼ਨ ਨਾਲ ਕਈ ਯੂਨਿਟਾਂ ਇਕੱਠੇ ਬਦਲੋਸਿਰਫ਼ ਉਹ ਯੂਨਿਟਾਂ ਚੁਣੋ ਜਿਨ੍ਹਾਂ ਵਿੱਚ ਇੱਕੋ ਬਦਲਾਅ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ, ਫਿਰ ਉਹ ਬਦਲਾਅ ਉਨ੍ਹਾਂ ਸਾਰਿਆਂ ਉੱਤੇ ਇਕੱਠੇ ਲਾਗੂ ਕਰੋ।
- ਕਈ ਵਾਲ ਯੂਨਿਟਾਂ ਦੀ ਬਣਾਵਟ ਇੱਕੋ ਵਾਰ ਬਦਲੋਕੋਨੇ ਵਾਲੀਆਂ ਯੂਨਿਟਾਂ ਤੋਂ ਬਿਨਾਂ ਸਾਰੀਆਂ ਵਾਲ ਯੂਨਿਟਾਂ ਚੁਣੋ, ਫਿਰ ਬਲਕ ਐਕਸ਼ਨ ਵਰਤੋ ਅਤੇ ਬਲਕ ਸਟ੍ਰਕਚਰ ਚੁਣ ਕੇ ਉਹਨਾਂ ਨੂੰ ਇਕੱਠਿਆਂ ਬਦਲੋ।
- ਸਿਰਫ਼ ਮੌਜੂਦਾ ਕੈਬਿਨੈੱਟਾਂ ਲਈ ਕਨੈਕਟਰ ਕਾਰਡ ਦੀ ਕਲੋਨ ਬਣਾਓਸੋਧਿਆ ਹੋਇਆ ਸੰਸਕਰਣ ਬਣਾਉਣ ਲਈ ਕਨੈਕਟਰ ਕਾਰਡ ਦੀ ਕਲੋਨ ਬਣਾਓ, ਜੋ ਸਿਰਫ਼ ਮੌਜੂਦਾ ਕੈਬਿਨੈੱਟਾਂ 'ਤੇ ਲਾਗੂ ਹੁੰਦਾ ਹੈ।
- ਦੋ ਕੈਬਿਨੈਟਾਂ ਨੂੰ ਇੱਕ ਯੂਜ਼ਰ ਕੰਪੋਨੈਂਟ ਵਿੱਚ ਜੋੜੋਦੋ ਵੱਖਰੇ ਕੈਬਿਨੈਟਾਂ ਨੂੰ ਇੱਕ ਯੂਜ਼ਰ ਕੰਪੋਨੈਂਟ ਵਿੱਚ ਜੋੜੋ, ਜੋ ਇੱਕ ਇਕਾਈ ਵਾਂਗ ਵਿਵਹਾਰ ਕਰੇ।
- ਬਲਾਈਂਡ ਕਾਰਨਰ ਯੂਨਿਟਾਂ ਨੂੰ ਸੱਜੇ-ਹੱਥ ਜਾਂ ਖੱਬੇ-ਹੱਥ ਵਜੋਂ ਸੰਰਚਿਤ ਕਰੋਬਲਾਈਂਡ ਕਾਰਨਰ ਯੂਨਿਟ ਨੂੰ ਸੱਜੇ-ਹੱਥ ਜਾਂ ਖੱਬੇ-ਹੱਥ ਵਾਲੇ ਵਿਕਲਪ 'ਤੇ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਇਹ ਸਹੀ ਢੰਗ ਨਾਲ ਸੰਰਚਿਤ ਹੋਵੇ।
- Ctrl+C ਅਤੇ Ctrl+V ਨਾਲ ਰੱਖੀ ਹੋਈ ਅਲਮਾਰੀ ਦੀ ਨਕਲ ਬਣਾਓਰੱਖੀ ਹੋਈ ਅਲਮਾਰੀ ਯੂਨਿਟ ਦੀ ਨਕਲ ਕਰੋ ਅਤੇ ਇਸਨੂੰ ਬਾਕੀ ਬਚੀ ਥਾਂ ਵਿੱਚ ਪੇਸਟ ਕਰੋ, ਫਿਰ ਸਥਿਤੀ ਠੀਕ ਕਰਨ ਲਈ ਯੂਨਿਟਾਂ ਨੂੰ ਇੱਕ ਦੂਜੇ ਦੇ ਪਿੱਛੇ ਖਿੱਚੋ।
- Edit connector ਕਾਰਡ ਸਪੇਸਿੰਗ ਪ੍ਰਤੀ ਕੈਬਿਨੈੱਟ, ਸਿੰਗਲ ਯੂਨਿਟ ਪੈਨਲ ਕੈਮ ਮੋਡ ਵਿੱਚਸਿਰਫ਼ ਇੱਕ ਕੈਬਿਨੈੱਟ ਲਈ ਕਨੈਕਟਰ ਕਾਰਡ ਸਪੇਸਿੰਗ ਬਦਲੋ, ਬਿਨਾਂ ਕਿਸੇ ਹੋਰ ਕੈਬਿਨੈੱਟ ਨੂੰ ਪ੍ਰਭਾਵਿਤ ਕੀਤੇ।
- ਵਾਰਡਰੋਬ ਦੀ ਚੌੜਾਈ, ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਸੋਧੋਵਾਰਡਰੋਬ ਦੀ ਚੌੜਾਈ, ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਬਦਲੋ ਅਤੇ ਅੰਦਰੂਨੀ ਲੇਆਉਟ ਨੂੰ ਆਪਣੇ ਆਪ ਸਮਾਯੋਜਿਤ ਹੋਣ ਦਿਓ।
- SU ਸ਼ਾਰਟਕੱਟ ਨਾਲ Single Unit CAM Mode ਦਰਜ ਕਰੋਪੈਨਲ ਲਈ Single Unit CAM Mode ਖੋਲ੍ਹਣ ਵਾਸਤੇ ਪ੍ਰੋਡਕਸ਼ਨ ਡਿਜ਼ਾਈਨ ਵਿੱਚ SU ਕੀਬੋਰਡ ਸ਼ਾਰਟਕੱਟ ਵਰਤੋ।
- ਬਹੁ-ਉਦੇਸ਼ ਮਾਡਿਊਲਰ ਫਰਨੀਚਰ ਵਿੱਚ ਟੀਵੀ ਬੇਸ ਅਤੇ ਟੀਵੀ ਦਰਾਜ਼ ਯੂਨਿਟਾਂ ਲੱਭੋਬਹੁ-ਉਦੇਸ਼ ਮਾਡਿਊਲਰ ਫਰਨੀਚਰ ਭਾਗ ਅਧੀਨ ਟੀਵੀ ਬੇਸ ਅਤੇ ਟੀਵੀ ਦਰਾਜ਼ ਯੂਨਿਟਾਂ ਲੱਭੋ, ਸਿੰਗਲ ਜਾਂ ਡਬਲ ਦਰਵਾਜ਼ੇ ਵਾਲੀਆਂ ਅਤੇ ਛੋਟੀ, 450 ਜਾਂ 600 ਉਚਾਈਆਂ ਵਿੱਚ।
- ਲਟਕਾਉਣ ਵਾਲੇ ਹਿੱਸੇ ਲਈ ਵਾਰਡਰੋਬ ਹੈਂਗਰ ਲੱਭੋਲਟਕਾਉਣ ਵਾਲੇ ਹਿੱਸੇ ਵਿੱਚ ਪਾਰਟੀਸ਼ਨ ਪੱਧਰ ਦੇ ਹੇਠਾਂ ਸਹਾਇਕ ਸਾਮਾਨ ਵਜੋਂ ਵਾਰਡਰੋਬ ਹੈਂਗਰ ਲੱਭੋ, ਜਿੱਥੇ ਸਟੋਰ ਵਿੱਚ ਪਹਿਲਾਂ ਹੀ ਬਿਨਾਂ ਬ੍ਰਾਂਡ ਵਾਲੇ ਹੈਂਗਰ ਉਪਲਬਧ ਹਨ।
- ਬਾਹਰਲੀ ਮਨਜ਼ੂਰ ਹੱਦ ਵਿੱਚ ਆਉਂਦੀ ਕੈਬਿਨੇਟ ਚੌੜਾਈ ਨੂੰ ਠੀਕ ਕਰੋਕੈਬਿਨੇਟ ਦੀ ਚੌੜਾਈ ਮਨਜ਼ੂਰ ਹੱਦ ਦੇ ਅੰਦਰ ਦਰਜ ਕਰੋ ਤਾਂ ਜੋ ਸਿਸਟਮ ਇਹ ਗਲਤੀ ਦਿਖਾਉਣਾ ਬੰਦ ਕਰ ਦੇਵੇ ਕਿ ਬਣਾਵਟ ਅਵੈਧ ਹੈ।
- ਆਪਣੇ 2D ਕੈਬਿਨੈਟ ਲੇਆਉਟ ਤੋਂ 3D ਮਾਡਲ ਬਣਾਓ2D ਡਿਜ਼ਾਈਨ ਵਿਊ ਵਿੱਚ ਕੈਬਿਨੈਟ ਰੱਖੋ ਅਤੇ 3D 'ਤੇ ਸਵਿੱਚ ਕਰੋ ਤਾਂ ਜੋ ਤੁਹਾਡੇ ਲੇਆਉਟ ਤੋਂ 3D ਮਾਡਲ ਆਪਣੇ ਆਪ ਬਣ ਜਾਵੇ।
- ਕੈਬਿਨੈੱਟ ਦੇ ਮਟੀਰੀਅਲ ਗੁਣ ਕਿਵੇਂ ਸੈੱਟ ਕੀਤੇ ਜਾਂਦੇ ਹਨਕੈਬਿਨੈੱਟ ਦੇ ਮਟੀਰੀਅਲ ਗੁਣ ਕਈ ਵੱਖਰੇ ਖੇਤਰਾਂ ਰਾਹੀਂ ਸੈੱਟ ਕੀਤੇ ਜਾਂਦੇ ਹਨ, ਅਤੇ ਸ਼ਟਰ ਦਾ ਬਾਹਰੀ ਫਿਨਿਸ਼ ਆਮ ਤੌਰ 'ਤੇ ਬਾਕੀ ਨਾਲੋਂ ਵੱਖਰਾ ਚੁਣਿਆ ਜਾਂਦਾ ਹੈ।
- 1800 mm ਤੋਂ ਉੱਪਰ ਦੇ ਕੈਬਿਨੈੱਟ ਲੌਫਟ ਯੂਨਿਟਾਂ ਵਜੋਂ ਕਿਵੇਂ ਮੰਨੇ ਜਾਂਦੇ ਹਨਜਾਣੋ ਕਿ Auto Presentation ਟੈਂਪਲੇਟ ਦੀ ਘੱਟੋ-ਘੱਟ ਉਚਾਈ ਅਤੇ Loft detection ਸਵਿੱਚ ਇਹ ਕਿਵੇਂ ਤੈਅ ਕਰਦੇ ਹਨ ਕਿ 1800 mm ਤੋਂ ਉੱਪਰ ਦਾ ਕੈਬਿਨੈੱਟ ਲੌਫਟ ਯੂਨਿਟ ਗਿਣਿਆ ਜਾਵੇ ਜਾਂ ਨਹੀਂ।
- ਕੈਬਿਨੈੱਟ ਦੇ ਘੱਟੋ-ਘੱਟ ਅਤੇ ਵੱਧ ਤੋਂ ਵੱਧ ਆਕਾਰ ਦੀਆਂ ਸੀਮਾਵਾਂ ਕਿਵੇਂ ਕੰਮ ਕਰਦੀਆਂ ਹਨਜਾਣੋ ਕਿ ਕੈਬਿਨੈੱਟ ਦੀ ਚੌੜਾਈ, ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ 'ਤੇ ਘੱਟੋ-ਘੱਟ ਅਤੇ ਵੱਧ ਤੋਂ ਵੱਧ ਆਕਾਰ ਦੀਆਂ ਸੀਮਾਵਾਂ ਕਿਵੇਂ ਲਾਗੂ ਹੁੰਦੀਆਂ ਹਨ ਅਤੇ ਇਹ ਕਿੱਥੇ ਸੈੱਟ ਕੀਤੀਆਂ ਜਾਂਦੀਆਂ ਹਨ।
- admin portal ਵਿੱਚ ਮੌਜੂਦਾ ਕੈਬਿਨੈੱਟ ਆਈਟਮਾਂ ਦਾ ਪ੍ਰਬੰਧਨ ਅਤੇ ਸੰਪਾਦਨ ਕਰੋadmin portal ਵਿੱਚ ਮੌਜੂਦਾ ਕੈਬਿਨੈੱਟ ਆਈਟਮਾਂ ਦਾ ਪ੍ਰਬੰਧਨ ਅਤੇ ਸੰਪਾਦਨ ਕਰੋ।
- ਰਸੋਈ ਫਰਨੀਚਰ ਲਾਇਬ੍ਰੇਰੀ ਤੋਂ ਵਾਲ ਯੂਨਿਟ ਅਤੇ ਟਾਲ ਯੂਨਿਟ ਰੱਖੋਰਸੋਈ ਫਰਨੀਚਰ ਲਾਇਬ੍ਰੇਰੀ ਤੋਂ ਵਾਲ ਯੂਨਿਟ ਜਾਂ ਟਾਲ ਯੂਨਿਟ ਰੱਖੋ ਅਤੇ ਹੋਰ ਕੈਬਿਨੈਟ ਕਿਸਮਾਂ ਵਾਂਗ ਹੀ ਪਲੇਸਮੈਂਟ ਵਿਕਲਪਾਂ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਇਸ ਦੇ ਮਾਪ ਵਿਵਸਥਿਤ ਕਰੋ।
- Y-ਧੁਰੇ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਲੌਫਟ ਨੂੰ ਵਾਲ ਕੈਬਿਨੈਟਾਂ ਉੱਤੇ ਰੱਖੋਲੌਫਟ ਦਾ Y-ਧੁਰਾ ਵਾਲ ਕੈਬਿਨੈਟ ਦੇ Y-ਧੁਰੇ ਜਮਾਂ 600 mm ਉੱਤੇ ਸੈੱਟ ਕਰੋ, ਤਾਂ ਜੋ ਲੌਫਟ ਵਾਲ ਯੂਨਿਟਾਂ ਉੱਤੇ ਸਹੀ ਢੰਗ ਨਾਲ ਬੈਠੇ।
- SKU ਢਾਂਚੇ ਵਿੱਚ ਤਬਦੀਲੀ ਤੋਂ ਬਾਅਦ ਕੈਸ਼ ਤਾਜ਼ਾ ਕਰੋ ਅਤੇ ਕੈਬਿਨੈੱਟ ਬਦਲੋਕੈਟਾਲਾਗ ਵਿੱਚ SKU ਢਾਂਚਾ ਬਦਲਣ ਤੋਂ ਬਾਅਦ, ਕੈਸ਼ ਤਾਜ਼ਾ ਕਰੋ ਅਤੇ design portal ਵਿੱਚ ਕੈਬਿਨੈੱਟ ਬਦਲੋ।
- ਕੈਬਿਨੇਟ ਨੂੰ ਘੁਮਾਓ ਅਤੇ ਇਸ ਦੀ ਸਥਿਤੀ ਅਤੇ ਘੁਮਾਅ ਸੈੱਟ ਕਰੋਚੁਣੇ ਹੋਏ ਕੈਬਿਨੇਟ ਨੂੰ ਸਪੇਸ ਬਾਰ ਜਾਂ ਸਹੀ Y ਕੋਣ ਨਾਲ ਘੁਮਾਓ, ਪੈਨਲ ਦੀ ਫਿਨਿਸ਼ ਘੁਮਾਓ, ਅਤੇ Position Y ਨੂੰ ਹੇਠਲੀ ਉਚਾਈ ਦੇ ਮੁਕਾਬਲੇ ਸਹੀ ਢੰਗ ਨਾਲ ਪੜ੍ਹੋ।
- ਵੇਖੋ ਕਿ ਯੂਨਿਟ-ਪੱਧਰ ਦੀਆਂ ਤਬਦੀਲੀਆਂ ਪੈਨਲਾਂ ਤੱਕ ਕਿਵੇਂ ਪਹੁੰਚਦੀਆਂ ਹਨਜਾਣੋ ਕਿ ਯੂਨਿਟ-ਪੱਧਰ ਦੀ ਸਮੱਗਰੀ ਦੀ ਤਬਦੀਲੀ ਕਦੋਂ ਕਿਸੇ ਪੈਨਲ ਤੱਕ ਪਹੁੰਚਦੀ ਹੈ ਅਤੇ ਆਟੋਮੇਸ਼ਨ ਨਿਯਮ ਅਤੇ ਲਿੰਕ ਕੀਤੇ SKU ਇਸ ਨੂੰ ਕਿਵੇਂ ਓਵਰਰਾਈਡ ਕਰ ਸਕਦੇ ਹਨ।
- ਸਾਈਜ਼ਿੰਗ ਨਿਯਮਾਂ ਰਾਹੀਂ ਕੈਬਿਨੈਟ ਦੇ ਘੱਟੋ-ਘੱਟ ਅਤੇ ਵੱਧ ਤੋਂ ਵੱਧ ਆਕਾਰ ਦੀਆਂ ਸੀਮਾਵਾਂ ਸੈੱਟ ਕਰੋਸਰੋਤ ਮਾਡਲ ਅਤੇ ਐਡਮਿਨ ਪੋਰਟਲ ਵਿੱਚ ਸਾਈਜ਼ਿੰਗ ਨਿਯਮ ਕਨਫਿਗਰ ਕਰੋ ਤਾਂ ਜੋ ਕੈਬਿਨੈਟ ਦੇ ਮਾਪ ਮਨਜ਼ੂਰ ਸੀਮਾਵਾਂ ਤੋਂ ਵੱਧ ਨਾ ਜਾ ਸਕਣ।
- ਕੈਬਿਨੈਟ ਜਾਂ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਬਾਹਰੀ ਅਤੇ ਅੰਦਰੂਨੀ ਸੀਮਾਵਾਂ ਲਈ ਸਾਈਜ਼ਿੰਗ ਨਿਯਮ ਸੈੱਟ ਕਰੋਚੁਣੋ ਕਿ ਯੂਨਿਟ ਦੀਆਂ ਸੀਮਾਵਾਂ ਇਸ ਦੇ ਬਾਹਰੀ ਮਾਪਾਂ ਉੱਤੇ ਲਾਗੂ ਹੁੰਦੀਆਂ ਹਨ ਜਾਂ ਇਸ ਦੀ ਅੰਦਰੂਨੀ ਖਾਲੀ ਥਾਂ ਉੱਤੇ, ਅਤੇ ਇਹਨਾਂ ਨੂੰ ਇੱਕ ਸਮੇਂ ਇੱਕ ਯੂਨਿਟ ਉੱਤੇ ਜਾਂ ਇੱਕਠਿਆਂ ਲਾਗੂ ਕਰੋ।
- ਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਕੈਬਿਨੈੱਟ ਲੇਬਲ ਸਪਸ਼ਟ ਤੌਰ 'ਤੇ ਦਿਖਾਓਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਹਰ ਕੈਬਿਨੈੱਟ ਆਪਣਾ ਨੰਬਰ ਲੇਬਲ ਦਿਖਾਉਂਦਾ ਹੈ, ਅਤੇ ਜਦੋਂ ਟੈਕਸਟ ਹੋਰ ਤੱਤਾਂ ਨਾਲ ਓਵਰਲੈਪ ਹੋਵੇ ਤਾਂ ਤੁਸੀਂ ਕਸਟਮ ਲੀਡਰ-ਸਟਾਈਲ ਲੇਬਲ ਜੋੜ ਸਕਦੇ ਹੋ।
- ਕੈਬਿਨੈੱਟ, ਵਾਰਡਰੋਬ ਅਤੇ ਕਸਟਮ ਪੈਨਲ ਸ਼੍ਰੇਣੀਆਂ ਨੂੰ ਸਮਝੋਜਾਣੋ ਕਿ Infurnia ਯੂਨਿਟਾਂ ਨੂੰ ਤਿੰਨ ਵੱਖਰੀਆਂ ਸ਼੍ਰੇਣੀਆਂ ਵਿੱਚ ਕਿਵੇਂ ਵੰਡਦਾ ਹੈ: ਕੈਬਿਨੈੱਟ, ਵਾਰਡਰੋਬ ਅਤੇ ਕਸਟਮ ਪੈਨਲ।
- ਵਾਰਡਰੋਬ ਡਿਜ਼ਾਈਨ ਬਣਾਉਣ ਲਈ FR ਸ਼ਾਰਟਕੱਟ ਵਰਤੋFR ਸ਼ਾਰਟਕੱਟ ਨਾਲ ਵਾਰਡਰੋਬ ਡਿਜ਼ਾਈਨ ਸ਼ੁਰੂ ਕਰੋ, ਫਿਰ ਡਬਲ ਸਵਿੰਗ ਸ਼ਟਰ ਲਗਾਓ ਅਤੇ ਅੰਦਰੂਨੀ ਕਾਰਕਾਸ ਅੰਗ ਪ੍ਰਬੰਧਿਤ ਕਰੋ।
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- ਕੈਬਿਨੈੱਟ ਉੱਤੇ ਸਥਿਰਤਾ ਰੇਲਾਂ ਜੋੜੋ, ਥਾਂ ਦਿਓ ਅਤੇ ਹਟਾਓਕੈਬਿਨੈੱਟ ਦੇ property panel ਤੋਂ ਸਥਿਰਤਾ ਰੇਲਾਂ ਜੋੜੋ ਅਤੇ ਸਿਸਟਮ ਉਹਨਾਂ ਨੂੰ ਹੇਠਲੇ ਅਤੇ ਉੱਪਰਲੇ ਪੈਨਲਾਂ ਵਿਚਕਾਰ ਬਰਾਬਰ ਥਾਂ ਦੇਵੇ।
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- Find settings in the cabinet editing panel tabsUse the Quick Access, Customize and Construction tabs and the selection tree to reach the setting you need.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- ਇੱਕ ਕੈਬਿਨੇਟ ਨੂੰ ਪੱਧਰਾਂ ਵਿੱਚ ਕਿਵੇਂ ਸੰਗਠਿਤ ਕੀਤਾ ਜਾਂਦਾ ਹੈਡਿਜ਼ਾਈਨ ਮੌਡਿਊਲ ਵਿੱਚ ਇੱਕ ਕੈਬਿਨੇਟ ਕੈਬਿਨੇਟ, ਪਾਰਟੀਸ਼ਨ, ਸ਼ਟਰ ਸਿਸਟਮ ਅਤੇ ਪੈਨਲ ਪੱਧਰਾਂ ਤੋਂ ਬਣਿਆ ਹੁੰਦਾ ਹੈ, ਅਤੇ ਹਰ ਪੱਧਰ ਦੀਆਂ ਆਪਣੀਆਂ ਸੈਟਿੰਗਾਂ ਹੁੰਦੀਆਂ ਹਨ।
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- ਜਾਣੋ ਕਿ ਨਵੇਂ ਪ੍ਰੋਜੈਕਟ ਕਿਹੜੀਆਂ ਇਕਾਈਆਂ ਅਤੇ ਸ਼ੁੱਧਤਾ ਵਰਤਦੇ ਹਨਨਵੇਂ ਪ੍ਰੋਜੈਕਟ ਮਿਲੀਮੀਟਰਾਂ ਵਿੱਚ ਮਾਪੇ ਜਾਂਦੇ ਹਨ, 1 mm ਤੱਕ ਸ਼ੁੱਧਤਾ ਨਾਲ।
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs settings ਵਿੱਚ ਯੂਨਿਟ ਅਤੇ ਪੈਨਲ ਐਨੋਟੇਸ਼ਨ ਮੁੜ-ਨਿਰਧਾਰਿਤ ਕਰੋਦੋ ਵਿੱਚੋਂ ਇੱਕ ਮੋਡ ਵਰਤ ਕੇ ਆਪਣੇ ਆਉਟਪੁੱਟਾਂ ਵਿੱਚ ਯੂਨਿਟ ਅਤੇ ਪੈਨਲ ਲੇਬਲਾਂ ਨੂੰ ਮੁੜ-ਨੰਬਰ ਦਿਓ; ਪਹਿਲਾਂ ਪੁਸ਼ਟੀ ਕਰੋ ਕਿਉਂਕਿ ਬਦਲਾਅ ਨੂੰ ਵਾਪਸ ਨਹੀਂ ਕੀਤਾ ਜਾ ਸਕਦਾ।
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- ਘੁਮਾਉਣ ਤੋਂ ਪਹਿਲਾਂ ਕੈਬਿਨੈਟ ਚੁਣੋਪਹਿਲਾਂ ਕੈਬਿਨੈਟ ਚੁਣੋ ਤਾਂ ਜੋ ਇਸਨੂੰ ਘੁਮਾਉਣ ਨਾਲ ਇਹ ਇਸਦੇ ਬਾਊਂਡਿੰਗ ਬਾਕਸ ਤੋਂ ਬਾਹਰ ਨਾ ਹੋ ਜਾਵੇ।
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- ਫਰਸ਼ ਦੀ ਟਾਈਲ ਦੇ ਖਾਲੀ ਸਥਾਨ ਤੋਂ ਉੱਪਰ ਵਾਲ ਯੂਨਿਟ ਦੀ ਹੇਠਲੀ ਉਚਾਈ ਸੈੱਟ ਕਰੋਜਾਣੋ ਕਿ ਬੇਸ ਯੂਨਿਟ ਜ਼ੀਰੋ ਲੈਵਲ ਤੋਂ 12 mm ਉੱਪਰ ਕਿਉਂ ਹੁੰਦੇ ਹਨ, ਤਾਂ ਜੋ ਵਾਲ ਯੂਨਿਟ ਦੀ ਹੇਠਲੀ ਉਚਾਈ ਮਿਆਰੀ 1450 mm ਤੋਂ 12 mm ਉੱਪਰ ਸੈੱਟ ਹੋਵੇ।
- ਬਲਾਈਂਡ ਕਾਰਨਰ ਯੂਨਿਟਾਂ ਅਤੇ ਡਮੀ ਪੈਨਲ ਸੈੱਟ ਕਰੋਸ਼ਟਰ ਅਤੇ ਨਾਨ-ਸ਼ਟਰ ਫਰੰਟ ਪੈਨਲ ਵਿਚਕਾਰ ਡਮੀ ਪੈਨਲ ਵਾਲੀ ਬਲਾਈਂਡ ਕਾਰਨਰ ਯੂਨਿਟ ਬਣਾਓ ਅਤੇ ਇਸਦੀ ਡੂੰਘਾਈ ਸੈੱਟ ਕਰੋ।
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- ਐਲੀਵੇਸ਼ਨ ਵਿਊ ਵਿੱਚ ਸਕੈਲਿਟਨ ਮੋਡ ਨਾਲ ਕੈਬਿਨੈੱਟ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਦਿਖਾਓਸ਼ਟਰਾਂ ਨੂੰ ਲੁਕਾਉਣ ਅਤੇ ਕੈਬਿਨੈੱਟ ਦੇ ਅੰਦਰੂਨੀ ਪਾਰਟੀਸ਼ਨਾਂ ਅਤੇ ਕਾਰਕਸ ਨੂੰ ਦਿਖਾਉਣ ਲਈ ਐਲੀਵੇਸ਼ਨ ਵਿਊ ਵਿੱਚ Turn on Skeleton mode ਦਬਾਓ, ਤਾਂ ਜੋ ਤੁਸੀਂ ਉਹਨਾਂ ਨੂੰ ਸਿੱਧਾ ਡਾਇਮੈਨਸ਼ਨ ਕਰ ਸਕੋ।
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- ਸਿੰਗਲ ਯੂਨਿਟ ਮੋਡ ਵਿੱਚ ਫਿਲਟਰ ਵਰਤੋ ਅਤੇ ਟਕਰਾਅ ਆਪਣੇ ਆਪ ਹੱਲ ਕਰੋਸਿੰਗਲ ਯੂਨਿਟ ਮੋਡ ਵਿੱਚ ਟਕਰਾਅ ਦੀ ਜਾਂਚ ਚਲਾ ਕੇ, ਉਲੰਘਣਾਵਾਂ ਲਈ ਫਿਲਟਰ ਕਰਕੇ ਅਤੇ ਸੱਜੇ-ਹੇਠਲੇ ਵਿਕਲਪਾਂ ਤੋਂ ਉਨ੍ਹਾਂ ਨੂੰ ਹੱਲ ਕਰਕੇ ਟਕਰਾਅ ਹੱਲ ਕਰੋ।
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- Add a drawer to a cabinet via partition level and drawer setInsert a drawer inside a cabinet from its partition level, then set its heights and add a shelf below if needed.
- ਕੈਬਿਨੈਟਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਉੱਤੇ ਸ਼ਟਰ ਡਿਜ਼ਾਈਨ ਸੇਵ ਕਰੋ ਅਤੇ ਦੁਬਾਰਾ ਵਰਤੋInfurnia ਵਿੱਚ ਸ਼ਟਰ ਡਿਜ਼ਾਈਨ ਸੇਵ ਕਰੋ ਅਤੇ modify shutter design ਰਾਹੀਂ ਇਸਨੂੰ ਕੈਬਿਨੈਟਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਉੱਤੇ ਲਾਗੂ ਕਰੋ।
- ਯੂਨਿਟਾਂ ਵਿੱਚ ਸਕਰਟਿੰਗ ਜੋੜੋ ਅਤੇ ਇਸਨੂੰ ਸੱਜੇ ਪਾਸਿਆਂ ਉੱਤੇ ਦਿਖਾਓਗੈਰ-ਲੱਕੜੀ ਸਕਰਟਿੰਗ ਚਾਲੂ ਕਰੋ, ਕਾਰਕਸ ਦੀ ਉਚਾਈ ਸਹੀ ਸੈੱਟ ਕਰੋ ਅਤੇ ਹਰ ਪਾਸੇ ਲਈ ਸਕਰਟਿੰਗ ਦੀ ਦਿੱਖ ਚਾਲੂ ਕਰੋ।
- ਪੂਰੀ ਕੈਬਿਨੈਟ ਜਾਂ ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਸ਼ਟਰ ਸਿਸਟਮ ਸ਼ਾਮਲ ਕਰੋਖੁੱਲ੍ਹੀ ਕੈਬਿਨੈਟ ਵਿੱਚ ਪੂਰੀ ਤਰ੍ਹਾਂ ਜਾਂ ਸਿਰਫ਼ ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਸ਼ਟਰ ਸਿਸਟਮ ਸ਼ਾਮਲ ਕਰੋ।
- ਵਾਰਡਰੋਬ ਵਿੱਚ ਅੰਦਰੂਨੀ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਸੰਰਚਿਤ ਕਰੋਪਾਰਟੀਸ਼ਨ ਦੀ ਉਚਾਈ ਨਿਰਧਾਰਿਤ ਕਰਕੇ, ਦਰਾਜ਼ ਨੂੰ ਅੰਦਰੂਨੀ ਅਤੇ ਬਾਕਸ ਕਿਸਮ 'ਤੇ ਸੈੱਟ ਕਰਕੇ, ਅਤੇ ਫਿਲਰਾਂ ਨੂੰ ਸ਼ਟਰ ਦੀ ਮੋਟਾਈ ਨਾਲ ਮਿਲਾ ਕੇ ਵਾਰਡਰੋਬ ਵਿੱਚ ਅੰਦਰੂਨੀ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ।
- ਕਈ ਯੂਨਿਟਾਂ 'ਤੇ ਇੱਕੋ ਵਾਰ ਕੋਰ ਅਤੇ ਸਮੱਗਰੀ ਤਬਦੀਲੀਆਂ ਲਾਗੂ ਕਰੋਬਲਕ ਐਡਿਟ, ਗਰੁੱਪ ਚੋਣ ਅਤੇ ਆਮ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਕਈ ਕੈਬਿਨੈਟਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਵਿੱਚ ਇੱਕੋ ਵਾਰ ਸਮੱਗਰੀ ਬਦਲੋ।
- ਇੱਕ ਯੂਨਿਟ ਉੱਤੇ ਸਕਰਟਿੰਗ ਦੀ ਕਿਸਮ ਅਤੇ ਉਚਾਈ ਸੈੱਟ ਕਰੋਹਰ ਯੂਨਿਟ ਲਈ ਲੱਕੜੀ ਜਾਂ ਗੈਰ-ਲੱਕੜੀ ਸਕਰਟਿੰਗ ਚੁਣੋ ਅਤੇ construction ਵਿਕਲਪਾਂ ਤੋਂ ਸਕਰਟਿੰਗ ਦੀ ਉਚਾਈ ਸੈੱਟ ਕਰੋ।
- ਕੈਬਿਨੈਟ ਬਣਾਉਣ ਦੇ ਫਾਰਮੂਲਿਆਂ ਵਿੱਚ ਪੈਨਲ ਦੀ ਮੋਟਾਈ ਦਾ ਹਵਾਲਾਕੱਚੇ ਨੰਬਰ ਟਾਈਪ ਕਰਨ ਦੀ ਬਜਾਏ ਸੁਝਾਵਾਂ ਵਿੱਚੋਂ ਮੋਟਾਈ ਪੈਰਾਮੀਟਰ ਚੁਣ ਕੇ ਬਣਾਉਣ ਦੇ ਫਾਰਮੂਲੇ ਵਿੱਚ ਪੈਨਲ ਦੀ ਮੋਟਾਈ ਦਾ ਹਵਾਲਾ ਦਿਓ।
- Clone and modify filler panels for both sides of a cabinetClone a filler panel and modify it so each side of a cabinet gets its own filler.
- ਕੈਬਿਨੈੱਟ ਸੈਟਿੰਗਾਂ ਵਿੱਚ ਕੈਬਿਨੈੱਟ ਸਕਰਟਿੰਗ ਸੰਰਚਿਤ ਕਰੋਕੈਬਿਨੈੱਟ ਸੰਰਚਨਾ ਵਿੱਚ ਕੈਬਿਨੈੱਟ ਸਕਰਟਿੰਗ ਦੇ ਵਿਕਲਪ ਲੱਭੋ।
- ਕੈਬਿਨੈਟਾਂ ਵਿੱਚ ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਕਿਵੇਂ ਕੰਮ ਕਰਦੀਆਂ ਹਨਜਾਣੋ ਕਿ ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਦਰਾਜ਼ ਪੱਧਰ 'ਤੇ ਕਿਵੇਂ ਸੰਰਚਿਤ ਕੀਤੀਆਂ ਜਾਂਦੀਆਂ ਹਨ, ਜਿਸ ਵਿੱਚ ਮਕੈਨਿਜ਼ਮ ਦੀਆਂ ਕਿਸਮਾਂ ਚੁਣਨਾ ਅਤੇ ਹਰ ਦਰਾਜ਼ ਲਈ ਹਾਰਡਵੇਅਰ ਮਿਲਾਉਣਾ ਸ਼ਾਮਲ ਹੈ।
- ਇੱਕ ਕੈਬਿਨੈੱਟ ਲਈ ਕਾਰਕਾਸ ਫਿਨਿਸ਼ ਬਦਲੋਚੁਣੇ ਹੋਏ ਕੈਬਿਨੈੱਟ ਦੇ ਸਾਰੇ ਕਾਰਕਾਸ ਪੈਨਲ ਇਕੱਠੇ ਅੱਪਡੇਟ ਕਰਨ ਲਈ ਕੈਬਿਨੈੱਟ ਪੱਧਰ 'ਤੇ ਕਾਰਕਾਸ ਫਿਨਿਸ਼ ਬਦਲੋ, ਬਿਨਾਂ ਉਸੇ ਕਿਸਮ ਦੇ ਹੋਰ ਕੈਬਿਨੈੱਟਾਂ ਨੂੰ ਪ੍ਰਭਾਵਿਤ ਕੀਤੇ।
- Copy and paste a cabinet to create similar cabinets quicklyFully adjust one cabinet first, then copy and paste it to create multiple similar cabinets faster than adjusting each one individually.
- ਕੈਬਿਨੈਟ ਦੇ ਹਰ ਪੈਨਲ ਉੱਤੇ ਇੱਕ ਐਜ ਬੈਂਡ ਲਗਾਓਕੈਬਿਨੈਟ ਪੱਧਰ ਉੱਤੇ ਐਜ ਬੈਂਡ ਸ਼ਾਮਲ ਕਰੋ ਤਾਂ ਜੋ ਇਹ ਉਸ ਕੈਬਿਨੈਟ ਦੇ ਹਰ ਪੈਨਲ ਉੱਤੇ ਲੱਗੇ।
- ਰਸੋਈ ਦੇ ਕੈਬਿਨੈੱਟ ਦੀ ਸਕਰਟਿੰਗ ਕੁੱਲ ਯੂਨਿਟ ਉਚਾਈ ਨੂੰ ਕਿਵੇਂ ਪ੍ਰਭਾਵਿਤ ਕਰਦੀ ਹੈਜਾਣੋ ਕਿ ਰਸੋਈ ਦੇ ਕੈਬਿਨੈੱਟ ਉੱਤੇ ਲਗਭਗ 100 mm ਦੀ ਸਕਰਟਿੰਗ ਕਿਵੇਂ ਕਾਰਕਸ ਦੀ ਉਚਾਈ ਵਿੱਚ ਜੁੜ ਕੇ, ਜੋ ਕਿ ਮਾਪਾਂ ਵਿੱਚ ਦਿਖਾਈ ਦਿੰਦੀ ਹੈ, ਕੁੱਲ ਯੂਨਿਟ ਉਚਾਈ ਬਣਾਉਂਦੀ ਹੈ।
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- ਡ੍ਰੌਪਡਾਊਨ ਰੀਯੂਜ਼ ਵਿਕਲਪ ਵਰਤ ਕੇ ਕਈ ਕੈਬਿਨੈਟ ਹਿੱਸਿਆਂ 'ਤੇ ਫਿਨਿਸ਼ ਲਾਓਲਾਇਬ੍ਰੇਰੀ ਤੋਂ ਕੈਬਿਨੈਟ ਦਾ ਫਿਨਿਸ਼ ਬਦਲੋ, ਫਿਰ ਉਹੀ ਫਿਨਿਸ਼ ਡ੍ਰੌਪਡਾਊਨ ਰਾਹੀਂ ਕਾਰਕੈਸ ਬਾਹਰੀ ਅਤੇ ਕਾਰਕੈਸ ਅੰਦਰੂਨੀ ਵਰਗੇ ਹੋਰ ਹਿੱਸਿਆਂ 'ਤੇ ਦੁਬਾਰਾ ਵਰਤੋ।
- ਕੈਬਿਨੈੱਟ ਪੱਧਰ 'ਤੇ ਸ਼ਟਰ ਦਾ ਰੰਗ ਅਤੇ ਪੈਨਲ ਪੱਧਰ 'ਤੇ ਪੈਨਲ ਦੀ ਫਿਨਿਸ਼ ਬਦਲੋਪੂਰੇ ਕੈਬਿਨੈੱਟ ਲਈ ਸ਼ਟਰ ਦਾ ਰੰਗ ਅਤੇ ਕਿਸੇ ਇੱਕ ਪੈਨਲ ਲਈ ਬਾਹਰੀ ਫਿਨਿਸ਼ ਸੈੱਟ ਕਰੋ।
- ਉਹ ਦਰਾਜ਼ ਠੀਕ ਕਰੋ ਜੋ ਕੈਬਿਨੈੱਟ ਦੇ ਅਗਲੇ ਹਿੱਸੇ ਨੂੰ ਪਾਰ ਕਰਦਾ ਹੈਬਾਹਰੀ ਦਰਾਜ਼ ਉੱਤੇ Drawer Back Gap ਜਾਂਚੋ ਤਾਂ ਜੋ ਦਰਾਜ਼ ਕੈਬਿਨੈੱਟ ਦੇ ਅਗਲੇ ਹਿੱਸੇ ਨੂੰ ਪਾਰ ਕਰਨਾ ਬੰਦ ਕਰ ਦੇਵੇ।
- Remove the skirting from a unitSwitch off the front skirting under Skirting Visibility so the unit no longer shows skirting at the front.
- ਕੈਬਿਨੇਟ ਅਤੇ ਆਈਲੈਂਡ ਰਸੋਈਆਂ ਲਈ ਸਹੀ ਐਲੀਵੇਸ਼ਨ ਚੁਣੋਉਹ ਐਲੀਵੇਸ਼ਨ ਢੰਗ ਚੁਣੋ ਜੋ ਤੁਹਾਡੇ ਰਸੋਈ ਲੇਆਉਟ ਨਾਲ ਮੇਲ ਖਾਂਦਾ ਹੈ, ਫਿਰ ਡਰਾਇੰਗ ਵਿੱਚ ਮਾਪ ਜੋੜੋ।
- ਸਲਾਈਡਿੰਗ ਸ਼ਟਰ ਵਾਲੀਆਂ ਯੂਨਿਟਾਂ ਵਿੱਚ ਟਕਰਾਉਂਦਾ ਡਰਾਅਰ ਫਿਲਰ ਹਟਾਓਖੜ੍ਹਵੀ ਪਾਰਟੀਸ਼ਨ ਅਤੇ ਸਭ ਤੋਂ ਖੱਬੇ ਜਾਂ ਸੱਜੇ ਪਾਸੇ ਡਰਾਅਰਾਂ ਵਾਲੀਆਂ ਸਲਾਈਡਿੰਗ ਸ਼ਟਰ ਯੂਨਿਟਾਂ ਵਿੱਚ, Construction ਪੈਨਲ ਤੋਂ ਉਹ ਫਿਲਰ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਹਟਾਓ ਜੋ ਉਸ ਪਾਸੇ ਟਕਰਾਉਂਦਾ ਹੈ।
- ਵਾਰਡਰੋਬ ਵਿੱਚ ਵਰਤੋਂਯੋਗ ਡਰਾਅਰ ਡੂੰਘਾਈ ਕੱਢੋਕੈਬਿਨੈੱਟ ਡੂੰਘਾਈ ਵਿੱਚੋਂ ਸ਼ੈਲਫ ਰਿਵੀਲ, ਬੈਕ ਪੈਨਲ ਆਫਸੈੱਟ, ਬੈਕ ਪੈਨਲ ਮੋਟਾਈ ਅਤੇ ਡਰਾਅਰ ਫੈਸ਼ੀਆ ਮੋਟਾਈ ਘਟਾ ਕੇ ਵਾਰਡਰੋਬ ਡਰਾਅਰ ਦਾ ਸਾਈਜ਼ ਕਰੋ।
- ਵਾਲ ਕੈਬਿਨੈਟ ਦੇ ਹੇਠਲੇ ਪੈਨਲ ਵਿੱਚ ਸਟ੍ਰਿਪ ਲਾਈਟ ਅਤੇ ਸਪਾਟਲਾਈਟ ਸ਼ਾਮਲ ਕਰੋਵਾਲ ਕੈਬਿਨੈਟ ਦੇ ਹੇਠਲੇ ਪੈਨਲ ਵਿੱਚ ਸਟ੍ਰਿਪ ਲਾਈਟ ਅਤੇ ਸਪਾਟਲਾਈਟ ਸ਼ਾਮਲ ਕਰਕੇ ਉਸ ਨੂੰ ਰੋਸ਼ਨ ਕਰੋ।
- ਕਿਸੇ ਵੀ ਯੂਨਿਟ ਕਿਸਮ ਉੱਤੇ ਫਿੰਗਰ ਗਰੂਵ ਪੈਨਲ ਹੈਂਡਲ ਲਗਾਓਫਿੰਗਰ-ਗਰੂਵ ਹੈਂਡਲ ਸ਼ਾਮਲ ਕਰੋ ਤਾਂ ਜੋ ਇਸ ਦੀ ਗਰੂਵ ਸ਼ਟਰ ਵਿੱਚ ਕੱਟੀ ਜਾਵੇ ਅਤੇ ਕਾਰਕਸ ਆਪਣੇ ਆਪ ਵਿਵਸਥਿਤ ਹੋ ਜਾਵੇ, ਬੇਸ ਯੂਨਿਟਾਂ, ਟਾਲ ਯੂਨਿਟਾਂ ਅਤੇ ਦਰਾਜ਼ਿਆਂ ਸਭ ਉੱਤੇ।
- ਹਰ ਕੈਬਿਨੈਟ ਲਈ ਹਾਰਡਵੇਅਰ ਨਿਯਮਾਂ ਰਾਹੀਂ ਸਾਈਟ ਹਾਰਡਵੇਅਰ ਜੋੜੋਹਾਰਡਵੇਅਰ ਨਿਯਮ ਬਣਾਓ ਜੋ ਹਰ ਕੈਬਿਨੈਟ ਅਤੇ ਵਾਰਡਰੋਬ ਨਾਲ ਸਹੀ ਹਾਰਡਵੇਅਰ ਜੋੜਦੇ ਹਨ, ਫਿਰ ਨਿਯਮ ਨੂੰ ਸਾਫ਼ ਕਰਕੇ ਸਰਗਰਮ ਕਰੋ ਤਾਂ ਜੋ ਹਿੰਜ ਸੈੱਟ ਹੋ ਸਕਣ।
- ਕਈ ਕੈਬਿਨੈਟਾਂ ਦੇ ਹੈਂਡਲ ਇੱਕੋ ਵਾਰ ਬਦਲੋਕੈਬਿਨੈਟਾਂ ਨੂੰ ਮਲਟੀ-ਸਿਲੈਕਟ ਕਰੋ ਅਤੇ ਉਨ੍ਹਾਂ ਦੇ ਹੈਂਡਲ ਇਕੱਠੇ ਬਦਲਣ ਲਈ ਪ੍ਰਾਪਰਟੀਜ਼ ਪੈਨਲ ਵਿੱਚ 'modify handle' ਵਿਕਲਪ ਵਰਤੋ।
- ਯੂਨਿਟ ਕਨਫਿਗਰੇਸ਼ਨ ਵਿੱਚ ਵਾਰਡਰੋਬ ਸ਼ਟਰ ਕਿਸਮਾਂ ਚੁਣੋਯੂਨਿਟ ਕਨਫਿਗਰੇਸ਼ਨ ਵਿੱਚ ਉਪਲਬਧ ਸ਼ਟਰ ਕਿਸਮਾਂ ਵਿੱਚੋਂ ਆਪਣੀ ਲੋੜੀਂਦੀ ਸ਼ਟਰ ਵਿਵਸਥਾ ਚੁਣੋ, ਇਸਨੂੰ ਹੱਥੀਂ ਮਾਡਲ ਨਾ ਕਰੋ।
- ਕੰਧ-ਵਿਭਾਜਕਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਵਿੱਚ ਸ਼ੈਲਫ ਰਿਵੀਲ ਦਾ ਪ੍ਰਬੰਧ ਕਰੋਸਮਝੋ ਕਿ ਸ਼ੈਲਫ ਰਿਵੀਲ ਕਿਵੇਂ ਨੈਸਟਡ ਕੰਧ-ਵਿਭਾਜਕਾਂ ਤੱਕ ਪਹੁੰਚਦਾ ਹੈ ਅਤੇ ਇਸਨੂੰ ਇੱਕੋ ਸਮੇਂ ਕਈ ਵਾਰਡਰੋਬਾਂ ਵਿੱਚ ਕਿਵੇਂ ਲਾਗੂ ਕਰਨਾ ਹੈ।
- ਇੱਕ ਯੂਨਿਟ ਦੀ ਬਣਾਵਟ ਵਿੱਚੋਂ ਇੱਕ ਪੈਨਲ ਹਟਾਓਸਿਰਫ਼ ਚੁਣੇ ਹੋਏ ਕੈਬਿਨੈਟ ਉੱਤੇ ਹੇਠਲੇ ਜਾਂ ਪਿਛਲੇ ਵਰਗੇ ਪੈਨਲ ਨੂੰ ਬੰਦ ਕਰੋ, ਕੰਪੋਨੈਂਟ ਪਰਿਭਾਸ਼ਾ ਨੂੰ ਛੇੜੇ ਬਿਨਾਂ।
- ਡਰਾਇਰ ਯੂਨਿਟ ਵਿੱਚ ਡਰਾਇਰ ਦੇ ਪਾਸਿਆਂ ਦੀਆਂ ਕਟੌਤੀਆਂ ਅਤੇ ਫ਼ੇਸ਼ੀਆ ਐਕਸਟੈਂਸ਼ਨ ਸੈੱਟ ਕਰੋ3 ਡਰਾਇਰ ਯੂਨਿਟ ਵਿੱਚ ਡਰਾਇਰ ਦੇ ਫ਼ੇਸ਼ੀਆ ਦਾ ਆਕਾਰ ਬਦਲਣ ਅਤੇ ਉਸ ਨੂੰ ਮੁੜ-ਆਕਾਰ ਦੇਣ ਲਈ ਡਰਾਇਰ ਦੇ ਆਪਣੇ ਪੈਨਲ ਦੀਆਂ ਕਟੌਤੀਆਂ ਅਤੇ ਐਕਸਟੈਂਸ਼ਨ ਸੈੱਟ ਕਰੋ।
- ਐਲੀਵੇਸ਼ਨ ਪਸੰਦਾਂ ਵਿੱਚ ਸ਼ਟਰ ਦਿਸ਼ਾ, ਯੂਨਿਟ ਅਤੇ ਸ਼ੈਲਫ ਐਨੋਟੇਸ਼ਨਾਂ ਨੂੰ ਟੌਗਲ ਕਰੋਐਲੀਵੇਸ਼ਨ ਪਸੰਦਾਂ ਵਿੱਚ ਸ਼ਟਰ ਦਿਸ਼ਾਵਾਂ, ਯੂਨਿਟ ਐਨੋਟੇਸ਼ਨਾਂ ਅਤੇ ਸ਼ੈਲਫ ਐਨੋਟੇਸ਼ਨਾਂ ਨੂੰ ਚਾਲੂ ਜਾਂ ਬੰਦ ਕਰਕੇ ਨਿਯੰਤਰਿਤ ਕਰੋ ਕਿ ਕਿਹੜੀਆਂ ਐਲੀਵੇਸ਼ਨ ਐਨੋਟੇਸ਼ਨਾਂ ਦਿਖਾਈ ਦੇਣ।
- ਵਾਰਡਰੋਬ ਵਿੱਚ ਵੱਖਰੇ ਪਾਰਟੀਸ਼ਨਾਂ ਨਾਲ ਕੰਮ ਕਰੋਵੰਡੇ ਹੋਏ ਵਾਰਡਰੋਬ ਦੇ ਹਰ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਚੁਣੋ, ਤਾਂ ਜੋ ਤੁਸੀਂ ਸਿਰਫ਼ ਇੱਕ ਜ਼ੋਨ ਵਿੱਚ ਸ਼ਟਰ ਲਗਾ ਸਕੋ ਜਾਂ ਬਾਕੀਆਂ ਨੂੰ ਛੇੜੇ ਬਿਨਾਂ ਉਸ ਦੀਆਂ ਸ਼ੈਲਫਾਂ ਬਦਲ ਸਕੋ।
- ਕੈਬਿਨੈੱਟ ਪੱਧਰ 'ਤੇ ਇੱਕ ਖਿਤਿਜੀ ਕਸਟਮ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਇਸਨੂੰ ਘੁਮਾਓਕੈਬਿਨੈੱਟ ਪੱਧਰ ਦੇ ਕਸਟਮ ਪੈਨਲ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਇੱਕ ਕੈਬਿਨੈੱਟ ਵਿੱਚ ਉੱਪਰਲਾ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ, ਫਿਰ ਇੱਕ ਖਿਤਿਜੀ ਕਸਟਮ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਇਸਨੂੰ ਕਿਤੇ ਵੀ ਰੱਖੋ।
- ਸਲਾਈਡਿੰਗ ਵਾਰਡਰੋਬ ਵਿੱਚ ਦਰਾਜ਼ ਸੈੱਟ ਸ਼ਾਮਲ ਕਰੋਆਪਣੇ ਡਿਜ਼ਾਈਨ ਵਿੱਚ ਸਲਾਈਡਿੰਗ ਵਾਰਡਰੋਬ ਲਈ ਦਰਾਜ਼ ਸੈੱਟ ਕਨਫਿਗਰ ਕਰੋ।
- ਇੱਕ ਯੂਨਿਟ ਦੇ ਦੋਵੇਂ ਪਾਸਿਆਂ 'ਤੇ Add drawersਪਹਿਲਾਂ ਇੱਕ ਖੜ੍ਹਾ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ, ਫਿਰ ਹਰ ਪਾਸੇ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ ਤਾਂ ਜੋ ਦਰਾਜ਼ ਯੂਨਿਟ ਦੇ ਦੋਵੇਂ ਪਾਸਿਆਂ 'ਤੇ ਹੋ ਸਕਣ।
- Add partitions and glass inside a cabinet zoneSplit a cabinet interior equally by adding a partition in the empty space inside the cabinet zone.
- ਕੈਬਿਨੈਟ ਉੱਤੇ ਸ਼ਟਰ ਸਿਸਟਮ ਲਾਗੂ ਕਰੋਕਸਟਮਾਈਜ਼ ਟੈਬ ਤੋਂ ਸਵਿੰਗ, ਸਲਾਈਡਿੰਗ ਜਾਂ ਲਿਫਟ-ਅੱਪ ਸ਼ਟਰ ਸਿਸਟਮ ਚੁਣੋ ਅਤੇ ਇਸਨੂੰ ਕੈਬਿਨੈਟ ਉੱਤੇ ਲਾਗੂ ਕਰੋ।
- Modify Countertop ਨਾਲ ਇੱਕ ਕਾਊਂਟਰਟਾਪ ਕਈ ਯੂਨਿਟਾਂ 'ਤੇ ਲਾਗੂ ਕਰੋਕਈ ਕੈਬਿਨੈੱਟ ਚੁਣੋ ਅਤੇ ਇੱਕੋ ਪੌਪ-ਅੱਪ ਵਿੱਚ ਉਹਨਾਂ ਦੀ ਕਾਊਂਟਰਟਾਪ ਮੋਟਾਈ ਅਤੇ ਸਮੱਗਰੀ ਇਕੱਠੇ ਸੈੱਟ ਕਰੋ।
- ਲੈਮੀਨੇਟ ਸਾਲਿਡਾਂ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਕਾਊਂਟਰਟਾਪ ਅਤੇ ਕੈਬਿਨੈੱਟ ਦਾ ਮਟੀਰੀਅਲ ਬਦਲੋਕਾਊਂਟਰਟਾਪ ਨੂੰ ਸੋਧ ਕੇ ਅਤੇ ਬਦਲਾਅ ਲਾਗੂ ਕਰਕੇ ਮਟੀਰੀਅਲ ਦੇ ਬਦਲਾਅ ਦੀ ਪੁਸ਼ਟੀ ਕਰੋ।
- ਇੱਕੋ ਸਮੇਂ ਕਈ ਯੂਨਿਟਾਂ ਦੇ ਹੈਂਡਲ ਅਤੇ ਸਮੱਗਰੀਆਂ ਬਦਲੋਕਈ ਯੂਨਿਟਾਂ ਨੂੰ ਇਕੱਠੇ ਚੁਣੋ ਅਤੇ change material / interchange ਕੰਟਰੋਲ ਨਾਲ ਇੱਕ ਹੀ ਕਾਰਵਾਈ ਵਿੱਚ ਉਨ੍ਹਾਂ ਦੇ ਫਿਨਿਸ਼ ਬਦਲੋ।
- ਪੂਰੇ ਡਿਜ਼ਾਈਨ ਅਤੇ ਭਵਿੱਖ ਦੇ ਕੈਬਿਨੈਟਾਂ ਨੂੰ ਬਦਲਣ ਲਈ ਕਨੈਕਟਰ ਕਾਰਡ ਦਾ ਸੰਪਾਦਨ ਕਰੋਅਸਲ ਕਨੈਕਟਰ ਦਾ ਸੰਪਾਦਨ ਕਰੋ ਤਾਂ ਜੋ ਪੂਰਾ ਡਿਜ਼ਾਈਨ ਅਤੇ ਭਵਿੱਖ ਦੇ ਕੈਬਿਨੈਟ ਬਦਲ ਜਾਣ।
- ਪੈਨਲ ਦਾ ਆਕਾਰ ਫਿਕਸ ਕਰੋ ਤਾਂ ਜੋ ਉਹ ਯੂਨਿਟ ਨਾਲ ਆਕਾਰ ਬਦਲਣਾ ਬੰਦ ਕਰ ਦੇਵੇਪੈਨਲ ਦੀ ਲੰਬਾਈ, ਡੂੰਘਾਈ ਜਾਂ ਉਚਾਈ ਨੂੰ ਇੱਕ ਫਿਕਸ ਮੁੱਲ ਤੇ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਕੈਬਿਨੈੱਟ ਜਾਂ ਵਾਰਡਰੋਬ ਦਾ ਆਕਾਰ ਬਦਲਣ ਨਾਲ ਉਸ ਪੈਨਲ ਦਾ ਆਕਾਰ ਨਾ ਬਦਲੇ।
- ਕੈਬਿਨੈੱਟ ਦੀ ਉਚਾਈ ਨਾਲ ਹਿੰਜਿਆਂ ਦੀ ਗਿਣਤੀ ਅਤੇ ਸਥਿਤੀ ਕਿਵੇਂ ਬਦਲਦੀ ਹੈਜਾਣੋ ਕਿ ਹਾਰਡਵੇਅਰ ਨਿਯਮ ਕੈਬਿਨੈੱਟ ਦੀ ਉਚਾਈ ਦੀ ਰੇਂਜ ਅਨੁਸਾਰ ਹਿੰਜਿਆਂ ਦੀ ਗਿਣਤੀ ਅਤੇ ਸਥਿਤੀ ਕਿਵੇਂ ਤੈਅ ਕਰਦੇ ਹਨ ਅਤੇ ਉਚਾਈ ਬਦਲਣ 'ਤੇ ਉਹਨਾਂ ਨੂੰ ਆਪਣੇ ਆਪ ਕਿਵੇਂ ਅੱਪਡੇਟ ਕਰਦੇ ਹਨ।
- ਕੈਬਿਨੈੱਟ ਵਿੱਚ ਕਸਟਮ ਪੈਨਲ ਰੱਖੋਕੈਟਾਲਾਗ ਵਿੱਚੋਂ ਜਾਂ Add Custom Panel ਨਾਲ ਕਸਟਮ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ, ਡੈਸ਼ ਵਾਲੀ ਰੂਪਰੇਖਾ ਦੀ ਪਾਲਣਾ ਕਰੋ ਅਤੇ ਇਸਨੂੰ ਲਾਗੂ ਕਰਨ ਲਈ ਕਲਿੱਕ ਕਰੋ।
- ਖੁੱਲ੍ਹੀਆਂ ਯੂਨਿਟਾਂ ਲਈ ਐਂਡ ਪੈਨਲ ਦੀ ਡੂੰਘਾਈ ਕਾਰਕਸ ਦੇ ਪੱਧਰ 'ਤੇ ਸੈੱਟ ਕਰੋਉਸ ਟਾਪ ਯੂਨਿਟ 'ਤੇ ਜਿਸ ਵਿੱਚ ਕੋਈ ਸ਼ਟਰ ਨਹੀਂ ਹੈ, ਐਂਡ ਪੈਨਲ ਨੂੰ ਕਾਰਕਸ ਦੇ ਪੱਧਰ 'ਤੇ ਰੋਕੋ ਤਾਂ ਜੋ ਇਹ ਕਾਰਕਸ ਨਾਲ ਮੇਲ ਖਾਵੇ।
- ਗਲੋਬਲ ਪਸੰਦਾਂ ਵਿੱਚ ਕੈਬਿਨੈੱਟਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਲਈ ਪ੍ਰੋਜੈਕਟ ਮਾਪਦੰਡ ਸੈੱਟ ਕਰੋਕੋਰ ਮਟੀਰੀਅਲ, ਫਿਨਿਸ਼, ਸ਼ਟਰ ਅਤੇ ਹੈਂਡਲ ਇੱਕ ਵਾਰ ਪ੍ਰੋਜੈਕਟ ਪੱਧਰ 'ਤੇ ਸੈੱਟ ਕਰੋ, ਤਾਂ ਜੋ ਬਾਅਦ ਵਿੱਚ ਸ਼ਾਮਲ ਕੀਤਾ ਹਰ ਕੈਬਿਨੈੱਟ ਅਤੇ ਵਾਰਡਰੋਬ ਉਹਨਾਂ ਮਾਪਦੰਡਾਂ 'ਤੇ ਡਿਫਾਲਟ ਹੋ ਜਾਵੇ।
- ਬਲਾਈਂਡ ਕਾਰਨਰ ਕੈਬਿਨੈਟ ਉੱਤੇ ਸ਼ਟਰ ਦੀ ਚੌੜਾਈ ਸੈੱਟ ਕਰੋਦੇਖੋ ਕਿ ਬਲਾਈਂਡ ਕਾਰਨਰ ਕੈਬਿਨੈਟ ਦੀ ਸ਼ਟਰ ਚੌੜਾਈ ਇਸਦੀ ਕੈਬਿਨੈਟ ਚੌੜਾਈ, ਡੂੰਘਾਈ ਅਤੇ ਉਚਾਈ ਦੇ ਨਾਲ ਕਿੱਥੇ ਆਉਂਦੀ ਹੈ।
- ਕੈਬਿਨੈਟ ਦੇ ਅੰਦਰ ਪਾਰਟੀਸ਼ਨਾਂ ਨੂੰ ਸਮਝੋ ਅਤੇ ਸ਼ੈਲਫਾਂ, ਪੈਨਲ ਜਾਂ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋਜਾਣੋ ਕਿ Infurnia ਵਿੱਚ ਪਾਰਟੀਸ਼ਨ ਕੀ ਹੈ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਪੱਧਰ 'ਤੇ ਸ਼ੈਲਫਾਂ, ਖੜ੍ਹੇ ਪੈਨਲ ਜਾਂ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ।
- ਵਾਲ ਯੂਨਿਟਾਂ ਲਈ ਵਾਲ ਗੋਲਾ ਪ੍ਰੋਫਾਈਲ ਵਰਤੋ, ਬੇਸ ਪ੍ਰੋਫਾਈਲ ਨਹੀਂਵਾਲ ਕੈਬਿਨੈਟ ਵਿੱਚ ਗੋਲਾ ਪ੍ਰੋਫਾਈਲ ਜੋੜਦੇ ਸਮੇਂ ਵਾਲ ਗੋਲਾ ਪ੍ਰੋਫਾਈਲ ਚੁਣੋ, ਕਿਉਂਕਿ ਬੇਸ ਪ੍ਰੋਫਾਈਲ ਵਾਲ ਯੂਨਿਟਾਂ ਲਈ ਗਲਤ ਹੈ।
- ਸਕਰਟਿੰਗ ਅਤੇ ਪੈਲਮੈਟ ਦੇ ਵਿਕਲਪ ਬੇਸ ਜਾਂ ਵਾਲ ਯੂਨਿਟਾਂ 'ਤੇ ਕਿਉਂ ਨਿਰਭਰ ਕਰਦੇ ਹਨਜਾਣੋ ਕਿ ਕਿਸੇ ਕੈਬਿਨੈੱਟ ਦਾ ਮਾਊਂਟਿੰਗ ਪਲੇਨ ਉਸਨੂੰ ਬੇਸ ਜਾਂ ਵਾਲ ਯੂਨਿਟ ਕਿਵੇਂ ਬਣਾਉਂਦਾ ਹੈ ਅਤੇ ਇਸ ਨਾਲ ਸਕਰਟਿੰਗ, ਪੈਲਮੈਟ, ਕਾਰਨਿਸ ਅਤੇ ਰੇਲ ਦੇ ਕਿਹੜੇ ਵਿਕਲਪ ਖੁੱਲ੍ਹਦੇ ਹਨ।
- ਕੰਸਟ੍ਰਕਸ਼ਨ ਰਾਹੀਂ ਯੂਨਿਟ ਦੇ ਅੰਦਰ ਪੈਰਾਮੈਟ੍ਰਿਕ ਕਸਟਮ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋਯੂਨਿਟ ਦੇ ਅੰਦਰ ਇੱਕ ਹਰੀਜ਼ੋਂਟਲ ਉੱਪਰਲਾ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਇਸਦਾ ਆਕਾਰ ਤੇ ਸਥਿਤੀ ਪੈਰਾਮੈਟ੍ਰਿਕ ਫਾਰਮੂਲਿਆਂ ਨਾਲ ਨਿਯੰਤਰਿਤ ਕਰੋ।
- ਰਸੋਈ ਫਰਨੀਚਰ ਕੈਟਾਲਾਗ ਤੋਂ ਬੇਸ, ਵਾਲ ਅਤੇ ਟਾਲ ਯੂਨਿਟ ਸ਼ਾਮਲ ਕਰੋਕਮਰੇ ਨੂੰ ਰਸੋਈ ਵਜੋਂ ਚਿੰਨ੍ਹਿਤ ਕਰੋ ਤਾਂ ਜੋ Insert / Furnish ਵਿੱਚ ਰਸੋਈ ਫਰਨੀਚਰ ਅਧੀਨ ਬੇਸ, ਵਾਲ ਅਤੇ ਟਾਲ ਯੂਨਿਟ ਤੱਕ ਪਹੁੰਚਣਾ ਸੌਖਾ ਹੋ ਜਾਵੇ।
- ਕੈਬਿਨੈਟ ਬਣਾਵਟ ਵਿੱਚ ਐਂਡ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ ਜਾਂ ਹਟਾਓਚੁਣੀ ਯੂਨਿਟ ਦੀ ਕੈਬਿਨੈਟ ਬਣਾਵਟ ਸੈਟਿੰਗਾਂ ਵਿੱਚੋਂ ਖੱਬਾ ਜਾਂ ਸੱਜਾ ਐਂਡ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ ਜਾਂ ਹਟਾਓ।
- ਵਾਰਡਰੋਬ ਬਣਾਵਟ ਵਿੱਚ ਸਕਰਟਿੰਗ ਉਚਾਈ ਅਤੇ ਸ਼ਟਰ ਸਿਸਟਮ ਨੂੰ ਸਮਾਯੋਜਿਤ ਕਰੋਵਾਰਡਰੋਬ ਬਣਾਵਟ ਵਿਕਲਪਾਂ ਹੇਠ ਤੀਜੀ ਟੈਬ ਤੋਂ ਵਾਰਡਰੋਬ ਅਤੇ ਸਟੈਂਡਰਡ ਕੈਬਿਨੈਟਾਂ ਲਈ ਸਕਰਟਿੰਗ ਉਚਾਈ ਜਾਂ ਸ਼ਟਰ ਸਿਸਟਮ ਬਦਲੋ।
- ਕੁੱਲ ਕੈਬਿਨੈਟ ਚੌੜਾਈ ਤੋਂ ਕਾਰਕਸ ਚੌੜਾਈ ਦੀ ਗਣਨਾ ਕਰੋਕਾਰਕਸ ਚੌੜਾਈ ਪਤਾ ਕਰਨ ਲਈ ਕੁੱਲ ਕੈਬਿਨੈਟ ਚੌੜਾਈ ਵਿੱਚੋਂ ਕਾਰਕਸ ਪੈਨਲ ਦੀ ਮੋਟਾਈ ਦਾ ਦੁੱਗਣਾ ਘਟਾਓ।
- ਕੈਬਿਨੈੱਟ ਦੀ ਤਿਆਰ ਉਚਾਈ ਦੀ ਗਣਨਾ ਕਰੋਤੱਤਾਂ ਨੂੰ ਸੰਰੇਖਿਤ ਕਰਨ ਲਈ ਕੁੱਲ ਉਚਾਈ ਪ੍ਰਾਪਤ ਕਰਨ ਲਈ ਕੈਬਿਨੈੱਟ ਦੀ ਉਚਾਈ, ਸਕਰਟਿੰਗ ਦੀ ਉਚਾਈ ਅਤੇ ਕਾਊਂਟਰਟਾਪ ਦੀ ਮੋਟਾਈ ਜੋੜੋ।
- ਚੋਣ ਟ੍ਰੀ ਜਾਂ ਯੂਨਿਟ ਰਾਹੀਂ ਕਾਊਂਟਰਟਾਪ ਸਮੱਗਰੀ ਬਦਲੋਯੂਨਿਟ ਚੁਣ ਕੇ ਜਾਂ ਚੋਣ ਟ੍ਰੀ ਵਰਤ ਕੇ, ਫਿਰ ਉਪਸ਼੍ਰੇਣੀ ਅਤੇ ਖਾਸ ਸਮੱਗਰੀ ਜਾਂ ਰੰਗ ਚੁਣ ਕੇ ਕਾਊਂਟਰਟਾਪ ਦੀ ਸਮੱਗਰੀ ਬਦਲੋ।
- Check panel-to-panel connections in single unit cam modeSee every connection scenario between a cabinet's panels, which connector cards each one uses, and the actual drills.
- admin portal ਰਾਹੀਂ ਜਾਂਚੋ ਕਿ ਕਿਹੜੇ ਹਾਰਡਵੇਅ ਨਿਯਮ ਕਿਸੇ ਕੈਬਿਨੈਟ 'ਤੇ ਲਾਗੂ ਹੁੰਦੇ ਹਨਉਹ ਹਾਰਡਵੇਅ ਨਿਯਮ ਲੱਭੋ ਜੋ ਕਿਸੇ ਕੈਬਿਨੈਟ 'ਤੇ ਲਾਗੂ ਹੁੰਦੇ ਹਨ ਅਤੇ ਉਨ੍ਹਾਂ ਦੀਆਂ ਸ਼ਰਤਾਂ ਅਤੇ ਉਹ ਜੋੜਦੇ ਹਨ ਉਹ ਹਾਰਡਵੇਅ ਵੇਖੋ।
- ਜਿਸ ਯੂਨਿਟ ਕਿਸਮ ਨੂੰ ਤੁਸੀਂ ਰੱਖ ਰਹੇ ਹੋ, ਉਸ ਲਈ ਸਹੀ ਪਸੰਦ ਸਮੂਹ ਚੁਣੋਉਸ ਪਸੰਦ ਸਮੂਹ ਨੂੰ ਚੁਣੋ ਜੋ ਰੱਖੀ ਜਾ ਰਹੀ ਯੂਨਿਟ ਕਿਸਮ ਨਾਲ ਮੇਲ ਖਾਂਦਾ ਹੈ, ਤਾਂ ਜੋ ਬੇਸ ਯੂਨਿਟ, ਵਾਲ ਯੂਨਿਟ, ਲੌਫਟ ਅਤੇ ਬਹੁ-ਮਕਸਦ ਯੂਨਿਟ ਕੈਬਿਨੈੱਟ ਪਸੰਦਾਂ ਵਰਤਣ ਅਤੇ ਵਾਰਡਰੋਬ ਵਾਰਡਰੋਬ ਪਸੰਦਾਂ ਵਰਤਣ।
- ਕੈਬਿਨੈੱਟ ਤੋਂ ਕਸਟਮ ਜਾਂ ਸੈਕਸ਼ਨਲ ਐਲੀਵੇਸ਼ਨ ਬਣਾਓਕਸਟਮ ਜਾਂ ਸੈਕਸ਼ਨਲ ਐਲੀਵੇਸ਼ਨ ਬਣਾਉਣ ਲਈ ਕਿਸੇ ਖਾਸ ਕੈਬਿਨੈੱਟ ਤੋਂ ਐਲੀਵੇਸ਼ਨ ਸ਼ੁਰੂ ਕਰੋ।
- ਦੋ ਯੂਨਿਟਾਂ ਵਿਚਕਾਰ ਵਰਟੀਕਲ ਗੋਲਾ ਹੈਂਡਲ ਕਿਵੇਂ ਸਾਂਝਾ ਹੁੰਦਾ ਹੈਦੇਖੋ ਕਿ ਵਰਟੀਕਲ ਗੋਲਾ ਹੈਂਡਲ ਦੋ ਨਾਲ ਲੱਗਦੀਆਂ ਯੂਨਿਟਾਂ ਨੂੰ ਕਿਵੇਂ ਜੋੜਦਾ ਹੈ, ਦੋਵੇਂ ਸਾਈਡ ਪੈਨਲਾਂ ਵਿੱਚ ਖੱਡ ਕਿਵੇਂ ਬਣਾਉਂਦਾ ਹੈ, ਅਤੇ ਇਸ ਨੂੰ ਹਟਾਉਣ 'ਤੇ ਕੀ ਹੁੰਦਾ ਹੈ।
- ਕਾਊਂਟਰਟਾਪ ਬੇਸ ਯੂਨਿਟ ਦੀ ਦਿਖਾਈ ਉਚਾਈ ਨੂੰ ਕਿਵੇਂ ਪ੍ਰਭਾਵਿਤ ਕਰਦੇ ਹਨਜਾਣੋ ਕਿ ਬੇਸ ਯੂਨਿਟ ਉੱਤੇ ਕਾਊਂਟਰਟਾਪ ਜੋੜਨ ਜਾਂ ਹਟਾਉਣ ਨਾਲ ਉਸ ਯੂਨਿਟ ਲਈ ਦਿਖਾਈ ਕਾਰਕਸ ਉਚਾਈ ਕਿਉਂ ਨਹੀਂ ਬਦਲਦੀ।
- ਕੈਬਿਨੈੱਟਾਂ ਹੇਠ ਕਸਟਮ ਪੈਨਲ ਕਿਵੇਂ ਸੂਚੀਬੱਧ ਹੁੰਦੇ ਹਨਜਾਣੋ ਕਿ ਕਸਟਮ ਪੈਨਲ ਕਿਸ ਕੈਬਿਨੈੱਟ ਹੇਠ ਸੂਚੀਬੱਧ ਹੁੰਦਾ ਹੈ, ਇਹ ਇਸ ਗੱਲ 'ਤੇ ਨਿਰਭਰ ਕਰਦਾ ਹੈ ਕਿ ਤੁਸੀਂ ਇਸਨੂੰ ਕਿੱਥੇ ਜੋੜਦੇ ਹੋ।
- ਪੈਨਲ ਦੇ ਮਾਪ ਐਕਸਟੈਂਸ਼ਨਾਂ ਅਤੇ ਕੈਬਿਨੈਟ ਸਮਾਯੋਜਨਾਂ ਨਾਲ ਕਿਵੇਂ ਨਿਰਧਾਰਿਤ ਹੁੰਦੇ ਹਨਜਾਣੋ ਕਿ ਪੈਨਲ ਦੀ ਕੁੱਲ ਮੋਟਾਈ ਉਸਦੇ ਕੋਰ ਅਤੇ ਫਿਨਿਸ਼ਾਂ ਤੋਂ ਕਿਵੇਂ ਗਿਣੀ ਜਾਂਦੀ ਹੈ, ਅਤੇ ਪ੍ਰੀ-ਲੈਮੀਨੇਟਿਡ ਅਤੇ ਪੋਸਟ-ਲੈਮੀਨੇਟਿਡ ਕੋਰ ਸਮੱਗਰੀਆਂ ਲਈ ਇਹ ਗਿਣਤੀ ਕਿਵੇਂ ਵੱਖਰੀ ਹੁੰਦੀ ਹੈ।
- ਕੈਬਿਨੈਟ ਨਾਲ ਅੰਦਰੂਨੀ ਅਤੇ ਬਾਹਰੀ ਫਿਨਿਸ਼ ਦਾ ਫਿਨਿਸ਼ ਮਟੀਰੀਅਲ ਲਿੰਕ ਕਰੋਫਿਨਿਸ਼ ਮਟੀਰੀਅਲ ਪ੍ਰਾਪਰਟੀਜ਼ ਵਿੱਚ ਕੈਬਿਨੈਟ ਦੇ ਬਾਹਰੀ ਅਤੇ ਅੰਦਰੂਨੀ ਫਿਨਿਸ਼ ਮਟੀਰੀਅਲ ਲਿੰਕ ਕਰਕੇ ਉਸ ਉੱਤੇ ਫਿਨਿਸ਼ ਲਗਾਓ।
- ਯੂਨਿਟ ਉੱਤੇ ਖੁੱਲ੍ਹਾ ਸਾਈਡ ਪੈਨਲ ਸੈੱਟ ਕਰੋਯੂਨਿਟ ਨੂੰ ਪੈਨਲ ਪੱਧਰ ਉੱਤੇ ਖੋਲ੍ਹੋ ਅਤੇ ਪੈਨਲ ਨੂੰ ਖੁੱਲ੍ਹਾ ਪੈਨਲ ਬਦਲੋ, ਕਿਉਂਕਿ ਇਸਨੂੰ ਯੂਨਿਟ-ਪੱਧਰ ਦੇ ਡਿਫਾਲਟ ਵਜੋਂ ਸੈੱਟ ਨਹੀਂ ਕੀਤਾ ਜਾ ਸਕਦਾ।
- ਕੈਬਿਨੈੱਟ ਰੱਖਣ ਤੋਂ ਪਹਿਲਾਂ ਕਾਰਕਾਸ ਕੋਰ ਅਤੇ ਬੈਕ-ਪੈਨਲ ਸਮੱਗਰੀ ਦੇ ਡਿਫ਼ਾਲਟ ਸੈੱਟ ਕਰੋਕੈਬਿਨੈੱਟ-ਪੱਧਰੀ ਪਸੰਦ ਵਿੱਚ ਕਾਰਕਾਸ ਕੋਰ ਅਤੇ ਬੈਕ-ਪੈਨਲ ਕੋਰ ਸਮੱਗਰੀਆਂ ਚੁਣੋ ਤਾਂ ਜੋ ਨਵੇਂ ਕੈਬਿਨੈੱਟ ਇਨ੍ਹਾਂ ਨਾਲ ਜੁੜੇ ਜਾਣ।
- ਗੋਲਾ ਅਤੇ G-ਪ੍ਰੋਫਾਈਲ ਕੈਬਿਨੈਟਾਂ ਲਈ ਉੱਪਰਲੇ ਪੈਨਲ ਦਾ ਆਕਾਰ ਨਿਰਧਾਰਤ ਕਰੋਜਾਣੋ ਕਿ ਗੋਲਾ ਪ੍ਰੋਫਾਈਲ ਉੱਪਰਲੇ ਪੈਨਲ ਨੂੰ ਪਿੱਛੇ ਵੱਲ ਕਿਵੇਂ ਖਿਸਕਾਉਂਦਾ ਹੈ, ਜਦਕਿ G-ਪ੍ਰੋਫਾਈਲ ਇਸਨੂੰ ਕਾਰਕਸ ਦੇ ਆਕਾਰ ’ਤੇ ਰੱਖਦਾ ਹੈ।
- ਕੋਣ ਵਾਲੀਆਂ ਕੈਬਿਨੈਟ ਸ਼ਕਲਾਂ ਲਈ ਕਸਟਮ ਪੈਨਲ ਵਰਤੋਮਿਆਰੀ ਕੈਬਿਨੈਟ ਪੈਨਲ ਨੂੰ ਘੁਮਾਉਣ ਦੀ ਬਜਾਏ ਵੱਖਰਾ ਕਸਟਮ ਪੈਨਲ ਵਰਤ ਕੇ ਕੋਣ ਵਾਲੀਆਂ ਜਾਂ ਗੈਰ-ਮਿਆਰੀ ਕੈਬਿਨੈਟ ਸ਼ਕਲਾਂ ਬਣਾਓ।
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- ਵਾਰਡਰੋਬ ਹੇਠਾਂ ਹੇਠਲੇ ਸਹਾਰਾ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋਹੇਠਲੇ ਸਹਾਰਾ ਪੈਨਲਾਂ ਦੀ ਗਿਣਤੀ ਅਤੇ ਉਚਾਈ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਉਹ ਪਲਿੰਥ ਜ਼ੋਨ ਵਿੱਚ ਕੈਬਿਨੈਟ ਦੇ ਹੇਠਲੇ ਹਿੱਸੇ ਹੇਠ ਬਰਾਬਰ ਖੜ੍ਹੇ ਹੋਣ।
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- ਅਲਮਾਰੀ ਲਈ ਸਹੀ ਖੱਬਾ ਜਾਂ ਸੱਜਾ ਸਿਰੇ ਦਾ ਪੈਨਲ ਚੁਣੋਅਲਮਾਰੀ ਵਿੱਚ ਖੱਬਾ ਜਾਂ ਸੱਜਾ ਸਿਰੇ ਦਾ ਪੈਨਲ ਜੋੜੋ, ਇਹ ਜਾਣਦੇ ਹੋਏ ਕਿ ਪਾਸਾ ਯੂਨਿਟ ਦੇ ਸ਼ਟਰਾਂ ਵੱਲ ਮੂੰਹ ਕਰਕੇ ਤੈਅ ਹੁੰਦਾ ਹੈ।
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- ਆਟੋਮੇਸ਼ਨ ਨਿਯਮ ਹਰ ਯੂਨਿਟ ਲਈ ਕਿਵੇਂ ਚੱਲਦੇ ਹਨ ਅਤੇ ਦੁਬਾਰਾ ਲਾਗੂ ਹੁੰਦੇ ਹਨਜਾਣੋ ਕਿ ਆਟੋਮੇਸ਼ਨ ਨਿਯਮ ਹਰ ਯੂਨਿਟ ਲਈ ਕਿਵੇਂ ਮੁਲਾਂਕਣ ਕੀਤੇ ਜਾਂਦੇ ਹਨ, ਹਰ ਵਾਰ ਚੱਲਣ 'ਤੇ ਰੀਸੈਟ ਹੋ ਕੇ ਦੁਬਾਰਾ ਲਾਗੂ ਹੁੰਦੇ ਹਨ, ਅਤੇ ਕਿਹੜੀਆਂ ਯੂਨਿਟਾਂ ਅਤੇ ਪੈਨਲ ਛੱਡੇ ਜਾਂਦੇ ਹਨ।
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3D ਵਿਊ ਵਿੱਚ ਇੱਕ ਯੂਨਿਟ ਨੂੰ ਅਲੱਗ ਕਰੋ ਅਤੇ QC ਨੂੰ ਇੱਕ ਕਮਰੇ ਤੱਕ ਸੀਮਿਤ ਕਰੋਕੰਧਾਂ ਦੇ ਰੋਕੇ ਬਿਨਾਂ ਇੱਕ ਯੂਨਿਟ ਨੂੰ ਨੇੜਿਓਂ ਵੇਖੋ, ਫਿਰ ਉਸ ਨੂੰ ਆਪਣਾ ਵਰਕ ਸਕੋਪ ਦੇ ਕੇ ਸਿਰਫ਼ ਇੱਕ ਕਮਰੇ ਲਈ QC ਚਲਾਓ।
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
ਹੋਰ ਗਾਈਡਾਂ 10
ਸਭ ਵੇਖੋ (10)
- ਬਲਕ ਐਡਿਟ ਸਟ੍ਰਕਚਰ ਰਾਹੀਂ ਨਿਰਮਾਣ ਅਤੇ ਬਣਾਵਟ ਸੈਟਿੰਗਾਂ ਲਾਗੂ ਕਰੋਬਲਕ ਐਡਿਟ ਸਟ੍ਰਕਚਰ ਵਿਕਲਪ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਕੈਬਿਨੈਟਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਉੱਤੇ ਬਣਾਵਟ ਅਤੇ ਨਿਰਮਾਣ ਸੰਰਚਨਾ ਸੈਟਿੰਗਾਂ ਲਾਗੂ ਕਰੋ।
- ਐਡਮਿਨ-ਪੋਰਟਲ ਨਿਯਮਾਂ ਰਾਹੀਂ ਜਾਂ ਹੱਥੀਂ ਕਨੈਕਟਰ ਸ਼ਾਮਲ ਕਰੋਕਨੈਕਟਰ admin portal ਵਿੱਚ ਨਿਯਮ ਪਰਿਭਾਸ਼ਿਤ ਕਰਕੇ ਸ਼ਾਮਲ ਕਰੋ, ਤਾਂ ਜੋ ਮੇਲ ਖਾਂਦੇ ਆਯਾਤ ਕੀਤੇ ਕੈਬਿਨੈਟਾਂ ਨੂੰ ਨਿਯਮ ਦੇ ਕਨੈਕਟਰ ਆਪਣੇ-ਆਪ ਮਿਲ ਜਾਣ, ਜਾਂ ਉਹਨਾਂ ਨੂੰ ਹੱਥੀਂ ਸ਼ਾਮਲ ਕਰੋ।
- ਗੋਲਾ ਅਤੇ ਪ੍ਰੋਫਾਈਲ ਦੀ ਲਗਾਉਣਾਜਾਣੋ ਕਿ ਕੈਬਿਨੇਟ ਮਾਡਲਿੰਗ ਵਿੱਚ ਗੋਲਾ ਅਤੇ ਪ੍ਰੋਫਾਈਲ ਕਿੱਥੇ ਲਗਾਏ ਜਾਂਦੇ ਹਨ ਅਤੇ ਦੋਵੇਂ ਇੱਕੋ ਕੈਬਿਨੇਟ ਉੱਤੇ ਕਿਵੇਂ ਦਿਖ ਸਕਦੇ ਹਨ।
- ਕੰਸਟ੍ਰਕਸ਼ਨ ਕਸਟਮਾਈਜ਼ ਰਾਹੀਂ ਹੈਂਗਿੰਗ ਰੂਟ ਸ਼ਾਮਲ ਕਰੋਵਾਰਡਰੋਬ ਵਿੱਚ ਹੈਂਗਿੰਗ ਰੂਟ ਸ਼ਾਮਲ ਕਰਨ ਲਈ, ਉੱਪਰ ਕੰਸਟ੍ਰਕਸ਼ਨ ਕਸਟਮਾਈਜ਼ੇਸ਼ਨ ਖੋਲ੍ਹੋ, ਹੈਂਗਿੰਗ ਰੂਟ ਵਿਕਲਪ ਚੁਣੋ ਅਤੇ ਇਸਨੂੰ ਕੈਟਾਲਾਗ ਵਿੱਚੋਂ ਚੁਣੋ।
- Quick Access, Customize ਅਤੇ Construction ਵਿਚਕਾਰ ਚੁਣੋਜਿਸ ਤਬਦੀਲੀ ਨੂੰ ਤੁਸੀਂ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ, ਉਸ ਨਾਲ ਮੇਲ ਖਾਂਦਾ ਕੈਬਿਨੇਟ ਕਸਟਮਾਈਜ਼ੇਸ਼ਨ ਮੀਨੂ ਚੁਣੋ, ਭਾਵੇਂ ਇਹ ਆਮ ਤਬਦੀਲੀ ਹੋਵੇ ਜਾਂ ਤੱਤ ਜੋੜਨਾ।
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- ਸ਼ਡਿਊਲ, ਕੰਪੋਜ਼ਿਟ BOQ ਅਤੇ ਸ਼ਡਿਊਲ ਟੈਂਪਲੇਟ ਨੂੰ ਸਮਝੋਜਾਣੋ ਕਿ ਸ਼ਡਿਊਲ-ਅਧਾਰਿਤ ਆਉਟਪੁੱਟ ਲੁਕੇ ਹੋਏ ਅਤੇ workscope ਤੋਂ ਬਾਹਰ ਕੀਤੇ ਤੱਤਾਂ ਨਾਲ ਕਿਵੇਂ ਵਿਵਹਾਰ ਕਰਦੇ ਹਨ, ਕੈਬਿਨੇਟ ਕੰਪੋਜ਼ਿਟ BOQ ਕਿਵੇਂ ਪ੍ਰਿੰਟ ਹੁੰਦਾ ਹੈ, ਅਤੇ ਸ਼ਡਿਊਲ ਨੂੰ ਕਿਵੇਂ ਸੰਭਾਲਣਾ ਅਤੇ ਐਕਸਪੋਰਟ ਕਰਨਾ ਹੈ।
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.