Set sizing rules on cabinet or partition for outer and inner limits

Choose whether a unit's limits apply to its outer dimensions or its internal clear space, and apply them one unit at a time or in bulk.

1. Sizing rules can be defined at two levels.

2. For restrictions on the outer dimensions of a unit (minimum/maximum width, depth, height), set the sizing rules on the cabinet.

   ✓ 9 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ

3. For restrictions on internal clear space — for example when an accessory such as a bottle pullout needs a certain inner clear space — set the sizing rules at the partition level instead.

   ✓ 9 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ

4. Use one level or the other, not both, because using both confuses the system and the user.

5. To set one handle type across every partition of a cabinet, go to the cabinet's partition level, add a partition rule, and in the description/ID field enter the keyword 'all_partitions'. Then modify the handle SKU so that any partition that has a handle uses the chosen handle. This avoids defining the handle partition by partition.

6. Sizing rules do not have to be applied one unit at a time. In the admin portal, units with identical dimensions can be multi-selected and the sizing rules applied in bulk. The same minimum/maximum width, height and depth fields seen in the design portal are available there.

   ✓ 10 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ