Set sizing rules on cabinet or partition for outer and inner limits

Choose whether a unit's limits apply to its outer dimensions or its internal clear space, and apply them one unit at a time or in bulk.

1. Sizing rules can be defined at two levels.

2. For restrictions on the outer dimensions of a unit (minimum/maximum width, depth, height), set the sizing rules on the cabinet.

   ✓ Verificato nel prodotto il 9 ottobre 2026

3. For restrictions on internal clear space — for example when an accessory such as a bottle pullout needs a certain inner clear space — set the sizing rules at the partition level instead.

   ✓ Verificato nel prodotto il 9 ottobre 2026

4. Use one level or the other, not both, because using both confuses the system and the user.

5. To set one handle type across every partition of a cabinet, go to the cabinet's partition level, add a partition rule, and in the description/ID field enter the keyword 'all_partitions'. Then modify the handle SKU so that any partition that has a handle uses the chosen handle. This avoids defining the handle partition by partition.

6. Sizing rules do not have to be applied one unit at a time. In the admin portal, units with identical dimensions can be multi-selected and the sizing rules applied in bulk. The same minimum/maximum width, height and depth fields seen in the design portal are available there.

   ✓ Verificato nel prodotto il 10 ottobre 2026