ਪਾਰਟੀਸ਼ਨ, ਸ਼ੈਲਫ ਅਤੇ ਅੰਦਰੂਨੀ ਹਿੱਸੇ
ਗਾਈਡਾਂ: 104
- ਪਾਰਟੀਸ਼ਨ, ਸ਼ੈਲਫ਼, ਡਰਾਅਰ ਅਤੇ ਸ਼ਟਰ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਸੰਰਚਿਤ ਕਰੋਕੰਪੋਨੈਂਟ ਪਾਰਟੀਸ਼ਨ ਪੱਧਰ 'ਤੇ ਸ਼ਾਮਲ ਕਰੋ ਤਾਂ ਜੋ ਹਰ ਸ਼ੈਲਫ਼, ਡਰਾਅਰ ਸੈੱਟ ਜਾਂ ਸ਼ਟਰ ਸਿਸਟਮ ਸਿਰਫ਼ ਯੂਨਿਟ ਦੇ ਉਸ ਹਿੱਸੇ 'ਤੇ ਲਾਗੂ ਹੋਵੇ।
- ਸ਼ੈਲਫ਼ ਨੂੰ ਟ੍ਰਾਂਸਲੇਟ ਕਰਨ ਦੀ ਥਾਂ ਪਾਰਟੀਸ਼ਨ ਦਾ ਮਾਪ ਬਦਲੋਪਾਰਟੀਸ਼ਨ ਲੈਵਲ ਬਦਲ ਕੇ ਕੈਬਿਨੈਟ ਨੂੰ ਵਿਵਸਥਿਤ ਕਰੋ, ਪਾਰਟੀਸ਼ਨ ਲੈਵਲ ਉੱਤੇ ਸ਼ਟਰ ਸਿਸਟਮ ਜੋੜੋ, ਅਤੇ ਸ਼ੈਲਫ਼ ਨੂੰ ਟ੍ਰਾਂਸਲੇਟ ਕਰਨ ਤੋਂ ਬਚੋ ਤਾਂ ਜੋ ਸ਼ੈਲਫ਼ ਪਾਰਟੀਸ਼ਨ ਲੇਆਉਟ ਨਾਲ ਮੇਲ ਖਾਂਦੀ ਰਹੇ।
- Add shelves via partition and shutters via shutter systemAdd a shelf with the partition option and add shutters with the Add Shutter System option, then set the mechanism to single or double swing.
- ਪਾਰਟੀਸ਼ਨ ਜਾਂ ਪੈਨਲ ਪੱਧਰ 'ਤੇ ਸ਼ੈਲਫ ਰਿਵੀਲ ਸੈੱਟ ਕਰੋਅੰਦਰੂਨੀ ਸ਼ੈਲਫਾਂ ਦੀ ਟਕਰਾਅ ਦੂਰ ਕਰਨ ਲਈ ਪਾਰਟੀਸ਼ਨ ਪੱਧਰ 'ਤੇ ਸ਼ੈਲਫ ਰਿਵੀਲ ਬਦਲੋ ਜਾਂ ਪੈਨਲ ਪੱਧਰ 'ਤੇ ਇੱਕ ਸ਼ੈਲਫ ਦਾ ਅਗਲਾ ਕਿਨਾਰਾ ਹਿਲਾਓ।
- ਕੈਬਿਨੈਟ ਪਾਰਟੀਸ਼ਨ ਦੀ ਵੰਡ ਨੂੰ ਨਿਯੰਤਰਿਤ ਕਰਨ ਲਈ ਸਥਿਰ ਉਚਾਈ ਸੈੱਟ ਕਰੋ ਅਤੇ ਦਰਾਜ਼ੇ ਸ਼ਾਮਲ ਕਰੋਕੈਬਿਨੈਟ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਸ਼ੈਲਫ ਜਾਂ ਲੰਬਕਾਰੀ ਪਾਰਟੀਸ਼ਨ ਨਾਲ ਵੰਡੋ, ਕਿਸੇ ਹਿੱਸੇ ਦਾ ਆਕਾਰ ਤੈਅ ਕਰਨ ਲਈ ਉਸ ਉੱਤੇ ਸਥਿਰ ਉਚਾਈ ਸੈੱਟ ਕਰੋ, ਫਿਰ ਹੈਂਗਿੰਗ ਰਾਡ ਜਾਂ ਸ਼ੈਲਫ ਸ਼ਾਮਲ ਕਰੋ।
- ਬਾਹਰੀ ਸ਼ਟਰਾਂ ਅਤੇ ਦਰਾਜ਼ਾਂ ਲਈ ਸ਼ੈਲਫ ਰਿਵੀਲ ਨੂੰ ਜ਼ੀਰੋ 'ਤੇ ਸੈੱਟ ਕਰੋਸ਼ੈਲਫ ਰਿਵੀਲ ਨੂੰ ਜ਼ੀਰੋ 'ਤੇ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਬਾਹਰੀ ਸ਼ਟਰ ਅਤੇ ਦਰਾਜ਼ ਅੰਦਰੂਨੀ ਸ਼ੈਲਫ ਸਪੇਸਿੰਗ ਕਾਰਨ ਆਫਸੈੱਟ ਨਾ ਹੋਣ।
- ਅਲਮਾਰੀ ਦੇ ਸ਼ੈਲਫ ਅਤੇ ਹਿੰਜ ਰਿਵੀਲ 5 mm ਤੋਂ ਵੱਡੇ ਸੈੱਟ ਕਰੋਇੱਕ ਸ਼ੈਲਫ ਰਿਵੀਲ ਚੁਣੋ ਜੋ ਇੰਨਾ ਵੱਡਾ ਹੋਵੇ ਕਿ ਅਲਮਾਰੀ ਦੇ ਸ਼ੈਲਫ ਅਤੇ ਹਿੰਜ ਆਪਸ ਵਿੱਚ ਨਾ ਟਕਰਾਉਣ, ਫਿਰ ਇਸਨੂੰ ਹਿੰਜ ਦੀ ਸਥਿਤੀ ਨਾਲ ਜਾਂਚੋ।
- ਇੱਕ ਖੜ੍ਹਾ ਵਿਭਾਜਕ ਅਤੇ ਦੋਵੇਂ ਪਾਸਿਆਂ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋਚੁਣੋ ਕਿ ਖੜ੍ਹਾ ਵਿਭਾਜਕ ਕਿਸ ਪਾਸੇ ਜਾਵੇਗਾ, ਫਿਰ ਖੜ੍ਹਾ ਵਿਭਾਜਕ ਅਤੇ ਸ਼ੈਲਫ਼ਾਂ ਲੱਗਣ ਤੋਂ ਬਾਅਦ ਹਰ ਪਾਸੇ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਸੰਰਚਿਤ ਕਰੋ।
- Add shelves ਨੂੰ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਅਤੇ ਸ਼ੈਲਫ ਰਿਵੀਲ ਨੂੰ ਜ਼ੀਰੋ 'ਤੇ ਸੈੱਟ ਕਰੋAdd shelves ਨੂੰ ਚੁਣੇ ਹੋਏ ਪਾਰਟੀਸ਼ਨ ਸਪੇਸ ਵਿੱਚ ਜੋੜੋ ਅਤੇ ਸ਼ੈਲਫ ਰਿਵੀਲ ਨੂੰ ਜ਼ੀਰੋ 'ਤੇ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਸਾਹਮਣੇ ਵਾਲੇ ਪਾਸੇ ਤੋਂ ਕੋਈ ਖਾਲੀ ਥਾਂ ਨਾ ਰਹੇ।
- ਕੰਧ-ਵਿਭਾਜਕਾਂ ਅਤੇ ਵਾਰਡਰੋਬਾਂ ਵਿੱਚ ਸ਼ੈਲਫ ਰਿਵੀਲ ਦਾ ਪ੍ਰਬੰਧ ਕਰੋਸਮਝੋ ਕਿ ਸ਼ੈਲਫ ਰਿਵੀਲ ਕਿਵੇਂ ਨੈਸਟਡ ਕੰਧ-ਵਿਭਾਜਕਾਂ ਤੱਕ ਪਹੁੰਚਦਾ ਹੈ ਅਤੇ ਇਸਨੂੰ ਇੱਕੋ ਸਮੇਂ ਕਈ ਵਾਰਡਰੋਬਾਂ ਵਿੱਚ ਕਿਵੇਂ ਲਾਗੂ ਕਰਨਾ ਹੈ।
- ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਵੰਡੋ ਅਤੇ ਉਪ-ਪਾਰਟੀਸ਼ਨਾਂ ਦਾ ਸੰਪਾਦਨ ਕਰੋਮੂਲ ਖੇਤਰ ਨੂੰ ਵੰਡਣ ਲਈ ਪਾਰਟੀਸ਼ਨ ਪੱਧਰ 'ਤੇ ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਹਰੇਕ ਉਪ-ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਸੰਪਾਦਿਤ ਕਰੋ।
- ਵਾਰਡਰੋਬ ਵਿੱਚ ਵੱਖਰੇ ਪਾਰਟੀਸ਼ਨਾਂ ਨਾਲ ਕੰਮ ਕਰੋਵੰਡੇ ਹੋਏ ਵਾਰਡਰੋਬ ਦੇ ਹਰ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਚੁਣੋ, ਤਾਂ ਜੋ ਤੁਸੀਂ ਸਿਰਫ਼ ਇੱਕ ਜ਼ੋਨ ਵਿੱਚ ਸ਼ਟਰ ਲਗਾ ਸਕੋ ਜਾਂ ਬਾਕੀਆਂ ਨੂੰ ਛੇੜੇ ਬਿਨਾਂ ਉਸ ਦੀਆਂ ਸ਼ੈਲਫਾਂ ਬਦਲ ਸਕੋ।
- Add partitions and glass inside a cabinet zoneSplit a cabinet interior equally by adding a partition in the empty space inside the cabinet zone.
- ਪੈਨਲ ਸੈਕਸ਼ਨ ਕੰਸਟ੍ਰਕਸ਼ਨ ਰਾਹੀਂ ਸ਼ੈਲਫ਼ ਵਿੱਚ ਪ੍ਰੋਫ਼ਾਈਲ ਸ਼ਾਮਲ ਕਰੋਲੋੜੀਂਦੇ ਪਾਸੇ ਪੈਨਲ ਸੈਕਸ਼ਨ ਦੀਆਂ construction/top ਸੈਟਿੰਗਾਂ ਤੋਂ ਸ਼ਾਮਲ ਕਰਕੇ ਸ਼ੈਲਫ਼ ਉੱਤੇ ਪ੍ਰੋਫ਼ਾਈਲ ਲਗਾਓ।
- Add shelves and hanging space by clicking on partitionsClick a partition to add shelves and hanging space inside a wardrobe, and plan around drawers at the bottom.
- ਸ਼ਟਰ ਸਪੇਸ ਲਈ 20 ਜਾਂ 25 ਦਾ ਸ਼ੈਲਫ ਰਿਵੀਲ ਲਾਗੂ ਕਰੋਸ਼ਟਰ ਸਪੇਸ ਲਈ 20 ਜਾਂ 25 ਦਾ ਸ਼ੈਲਫ ਰਿਵੀਲ ਲਾਗੂ ਕਰੋ ਤਾਂ ਜੋ ਦਰਾਜ਼ ਸੈੱਟ ਸ਼ਾਮਲ ਕਰਨ ਤੋਂ ਪਹਿਲਾਂ ਸ਼ੈਲਫ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਸੈੱਟ ਹੋ ਜਾਣ।
- ਵਾਰਡਰੋਬ ਦੇ ਪਾਰਟੀਸ਼ਨ, ਸ਼ੈਲਫ਼ਾਂ ਅਤੇ ਜ਼ੋਨ ਅਨੁਕੂਲਿਤ ਕਰੋਗਾਹਕ ਦੀ ਲੋੜ ਅਨੁਸਾਰ ਪਾਰਟੀਸ਼ਨ, ਸ਼ੈਲਫ਼ਾਂ ਅਤੇ ਜ਼ੋਨ ਸਜਾਓ, ਜਿਸ ਵਿੱਚ ਲੰਮੀ ਲਟਕਾਉਣ ਦੀ ਥਾਂ ਜਾਂ ਦਰਾਜ਼ਾਂ ਦੀ ਬਣਾਵਟ ਵੀ ਸ਼ਾਮਲ ਹੈ।
- ਕਿਸੇ ਪਾਰਟੀਸ਼ਨ ਦੀ ਉਚਾਈ ਬਦਲਣ ਲਈ ਉਸਨੂੰ ਸਥਿਰ ਉਚਾਈ 'ਤੇ ਸੈੱਟ ਕਰੋਕਿਸੇ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਸਥਿਰ ਉਚਾਈ 'ਤੇ ਬਦਲ ਕੇ ਅਤੇ ਲੋੜੀਂਦੀ ਉਚਾਈ ਦਰਜ ਕਰਕੇ ਉਸਨੂੰ ਉੱਚਾ ਜਾਂ ਨੀਵਾਂ ਕਰੋ।
- ਵਾਰਡਰੋਬ ਪਸੰਦਾਂ ਵਿੱਚ ਸ਼ੈਲਫ਼ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਕਿਨਾਰੇ ਦੀ ਦਿੱਖ ਸੈੱਟ ਕਰੋCabinet Preference / Wardrobe Preference ਵਿੱਚ ਫਿਕਸਡ ਸ਼ੈਲਫ਼ਾਂ, ਐਡਜਸਟੇਬਲ ਸ਼ੈਲਫ਼ਾਂ ਅਤੇ ਖੜ੍ਹਵੇਂ ਪਾਰਟੀਸ਼ਨ ਪੈਨਲਾਂ ਲਈ ਫਰੰਟ/ਕਾਰਕਾਸ ਦਿਖਣ ਵਾਲੀ ਐਜ ਬੈਂਡ ਨੂੰ ਕਾਰਕਾਸ ਅਦਿੱਖ ਸੈੱਟ ਕਰੋ।
- ਫਲੱਸ਼ ਸ਼ੈਲਫਾਂ ਲਈ ਸ਼ੈਲਫ ਰਿਵੀਲ ਅਤੇ ਫਰੰਟ ਗੈਪ ਨੂੰ ਜ਼ੀਰੋ 'ਤੇ ਸੈੱਟ ਕਰੋਸ਼ੈਲਫਾਂ ਨੂੰ ਫਲੱਸ਼ ਬਣਾਉਣ ਲਈ ਖੱਬੇ-ਹੱਥ ਪੈਨਲ 'ਤੇ ਸ਼ੈਲਫ/ਪੈਨਲ ਕੰਸਟ੍ਰਕਸ਼ਨ ਸੈਟਿੰਗਾਂ ਵਿੱਚ ਸ਼ੈਲਫ ਰਿਵੀਲ ਅਤੇ ਫਰੰਟ ਗੈਪ ਨੂੰ ਸੋਧੋ।
- ਪਾਰਟੀਸ਼ਨਾਂ ਅਤੇ ਕਨਫਿਗਰੇਸ਼ਨਾਂ ਉੱਤੇ ਸ਼ੈਲਫ ਰਿਵੀਲ ਸੈੱਟ ਕਰੋਪਾਰਟੀਸ਼ਨ ਦਾ ਸ਼ੈਲਫ ਰਿਵੀਲ ਸੈੱਟ ਕਰੋ, ਡਿਜ਼ਾਈਨ ਦਾ ਰਿਵੀਲ ਰੱਖੋ ਜਾਂ ਕਨਫਿਗਰੇਸ਼ਨ ਨੂੰ ਪੇਰੈਂਟ ਦਾ ਮੁੱਲ ਲੈਣ ਦਿਓ।
- ਸ਼ੈਲਫ਼ਾਂ ਨੂੰ ਫਿਕਸ ਜਾਂ ਐਡਜਸਟੇਬਲ ਸੈੱਟ ਕਰੋ ਅਤੇ ਪਾਰਟੀਸ਼ਨਾਂ ਦਾ ਆਕਾਰ ਦਿਓਫਿਕਸ ਜਾਂ ਐਡਜਸਟੇਬਲ ਸ਼ੈਲਫ਼ਾਂ ਚੁਣੋ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਹੀ ਪਾਰਟੀਸ਼ਨਾਂ ਦੀਆਂ ਚੌੜਾਈਆਂ ਅਤੇ ਅਨੁਪਾਤ ਸੈੱਟ ਕਰੋ।
- ਕੈਬਿਨੈਟ ਦੇ ਅੰਦਰ ਪਾਰਟੀਸ਼ਨਾਂ ਨੂੰ ਸਮਝੋ ਅਤੇ ਸ਼ੈਲਫਾਂ, ਪੈਨਲ ਜਾਂ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋਜਾਣੋ ਕਿ Infurnia ਵਿੱਚ ਪਾਰਟੀਸ਼ਨ ਕੀ ਹੈ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਪੱਧਰ 'ਤੇ ਸ਼ੈਲਫਾਂ, ਖੜ੍ਹੇ ਪੈਨਲ ਜਾਂ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ।
- ਸ਼ੈਲਫ ਜਾਂ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਕਿਉਂ ਨਹੀਂ ਮਿਟਾਇਆ ਜਾ ਸਕਦਾਜਾਣੋ ਕਿ ਸ਼ੈਲਫ ਜਾਂ ਪਾਰਟੀਸ਼ਨ ਪੈਨਲ ਨੂੰ ਮਿਟਾਉਣ ਤੋਂ ਕਿਉਂ ਰੋਕਿਆ ਜਾ ਸਕਦਾ ਹੈ ਅਤੇ ਇਸ ਦਾ ਹੱਲ ਕਿਵੇਂ ਕਰਨਾ ਹੈ।
- Align a shelf between a shutter and a drawerLearn where a shelf sits by default between a shutter and a drawer and how to shift its alignment by adjusting the extension.
- ਸ਼ੈਲਫ ਨੂੰ ਐਡਜਸਟੇਬਲ ਤੋਂ ਫਿਕਸਡ ਵਿੱਚ ਬਦਲੋਪਾਰਟੀਸ਼ਨ ਲੈਵਲ 'ਤੇ ਜੋੜੀਆਂ ਗਈਆਂ ਸ਼ੈਲਫਾਂ ਸ਼ੁਰੂ ਵਿੱਚ ਐਡਜਸਟੇਬਲ ਹੁੰਦੀਆਂ ਹਨ, ਅਤੇ ਤੁਸੀਂ ਪੈਨਲ ਲੈਵਲ 'ਤੇ ਇਸ ਦੀ ਕਿਸਮ ਬਦਲ ਕੇ ਇੱਕ ਨੂੰ ਫਿਕਸਡ ਬਣਾ ਸਕਦੇ ਹੋ।
- ਪਹਿਲਾਂ ਤੋਂ ਪਰਿਭਾਸ਼ਿਤ ਪਾਰਟੀਸ਼ਨ ਸੰਰਚਨਾ ਚੁਣੋਵੱਖਰੀਆਂ ਯੂਨਿਟਾਂ ਛੱਡਣ ਦੀ ਬਜਾਏ, ਉਹ ਤਿਆਰ ਲੇਆਉਟ ਚੁਣੋ ਜਿਸ ਦਾ ਫਿਲਰ ਪਾਸਾ ਲੋੜ ਨਾਲ ਮੇਲ ਖਾਂਦਾ ਹੈ।
- ਸ਼ੈਲਫ ਅਤੇ ਲੰਬਕਾਰੀ ਥਾਵਾਂ ਨੂੰ ਬਰਾਬਰ ਜਾਂ ਸਹੀ ਮਾਪ ਨਾਲ ਵੰਡੋAdd shelves ਅਤੇ ਲੰਬਕਾਰੀ ਹਿੱਸੇ ਜੋ ਥਾਂ ਨੂੰ ਡਿਫਾਲਟ ਰੂਪ ਵਿੱਚ ਬਰਾਬਰ ਵੰਡਦੇ ਹਨ, ਜਾਂ ਕੋਈ ਥਾਂ ਚੁਣੋ ਅਤੇ ਉਸਨੂੰ ਅਸਮਾਨ ਰੂਪ ਵਿੱਚ ਵੰਡਣ ਲਈ ਸਹੀ ਮਾਪ ਭਰੋ।
- ਡਿਫਾਲਟ ਸ਼ੈਲਫ ਰਿਵੀਲ ਦੂਰੀ ਕਿਵੇਂ ਕੰਮ ਕਰਦੀ ਹੈਜਾਣੋ ਕਿ ਸ਼ੈਲਫ ਰਿਵੀਲ ਦੂਰੀ ਡਿਫਾਲਟ ਤੌਰ 'ਤੇ ਕੀ ਸੈੱਟ ਹੈ ਅਤੇ ਕੈਟਾਲਾਗ ਐਂਟਰੀਆਂ ਬਣਾਉਂਦੇ ਸਮੇਂ ਤੁਸੀਂ ਇਸਨੂੰ ਕਿਉਂ ਨੋਟ ਕਰਦੇ ਹੋ।
- Lock a partition section and set its exact heightSwitch a partition section to fixed, give it dimensions and set an exact partition height.
- ਅੰਦਰੂਨੀ ਸ਼ੈਲਫ ਨੂੰ ਫਿਕਸਡ ਬਣਾਓ ਅਤੇ ਸ਼ਟਰ ਸਮੱਗਰੀ ਸੈੱਟ ਕਰੋਕੈਬਿਨੈੱਟ ਦੀ ਅੰਦਰੂਨੀ ਸ਼ੈਲਫ ਨੂੰ ਫਿਕਸਡ ਪੈਨਲ ਵਜੋਂ ਸੈੱਟ ਕਰੋ ਅਤੇ ਇਸਨੂੰ ਸਾਹਮਣੇ ਤੋਂ 20 mm ਘਟਾਓ।
- Front shift ਨਾਲ ਪਾਰਟੀਸ਼ਨਾਂ ਅਤੇ ਪੈਟਰਨਾਂ ਨੂੰ ਕੰਧ ਤੋਂ ਅੱਗੇ ਖਿਸਕਾਓਕੰਧ ਤੋਂ ਅੱਗੇ ਇੱਕ ਆਫਸੈੱਟ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਪਾਰਟੀਸ਼ਨਾਂ, ਰਾਫਟਰ ਅਤੇ ਖਿੱਚੇ ਗਏ ਪੈਟਰਨ ਤੁਹਾਡੀ ਲੋੜੀਂਦੀ ਦੂਰੀ 'ਤੇ ਹੋਣ।
- ਢਾਂਚੇ ਵਿੱਚ ਸ਼ੈਲਫ ਜੋੜਨ ਤੋਂ ਪਹਿਲਾਂ ਲੰਬਕਾਰੀ ਪਾਰਟੀਸ਼ਨ ਹਟਾਓਜਿੱਥੇ ਹੁਣ ਲੰਬਕਾਰੀ ਪਾਰਟੀਸ਼ਨ ਹੈ ਉੱਥੇ ਸ਼ੈਲਫ ਰੱਖਣ ਲਈ ਪਹਿਲਾਂ ਪਾਰਟੀਸ਼ਨ ਹਟਾਓ, ਸ਼ੈਲਫ ਜੋੜੋ, ਫਿਰ ਲੰਬਕਾਰੀ ਪਾਰਟੀਸ਼ਨ ਵਾਲੇ ਕਦਮ 'ਤੇ ਵਾਪਸ ਜਾਓ।
- L-ਕੋਨੇ ਵਾਲੀ ਪਾਰਟੀਸ਼ਨ ਨੂੰ Front Major ਜਾਂ Side Major ਵਿੱਚ ਵੰਡੋL-ਕੋਨੇ ਵਾਲੀ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਵੰਡੋ, ਹਰ ਹਿੱਸੇ ਵਿੱਚ ਸ਼ੈਲਫ਼ਾਂ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਪੈਨਲ ਦੇ ਮਾਪਾਂ ਨੂੰ ਸੰਰੇਖਿਤ ਕਰੋ।
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- ਪਾਰਟੀਸ਼ਨ ਸੈਕਸ਼ਨ ਕਿਵੇਂ ਆਟੋ-ਸਾਈਜ਼ ਅਤੇ ਲਾਕ ਹੁੰਦੇ ਹਨਦੇਖੋ ਕਿ ਆਟੋ ਅਤੇ ਫਿਕਸਡ ਪਾਰਟੀਸ਼ਨ ਸੈਕਸ਼ਨ ਕਿਵੇਂ ਥਾਂ ਸਾਂਝੀ ਕਰਦੇ ਹਨ ਅਤੇ ਇੱਕ ਸੈਕਸ਼ਨ ਹਮੇਸ਼ਾ ਆਟੋ-ਐਡਜਸਟ ਹੁੰਦਾ ਕਿਉਂ ਰਹਿੰਦਾ ਹੈ।
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਸੰਭਾਲੀ ਹੋਈ ਪਾਰਟੀਸ਼ਨ ਸੰਰਚਨਾ ਲੋਡ ਕਰੋਇੱਕ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ 'Partition Configuration' ਡ੍ਰੌਪਡਾਊਨ ਖੋਲ੍ਹੋ ਅਤੇ ਸੰਭਾਲੀ ਹੋਈ ਸੰਰਚਨਾ ਲਾਗੂ ਕਰੋ, ਇਹ ਜਾਂਚਦੇ ਹੋਏ ਕਿ ਇਹ ਸੈਕਸ਼ਨ ਵਿੱਚ ਫਿੱਟ ਹੁੰਦੀ ਹੈ।
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- ਸ਼ੈਲਫ ਐਨੋਟੇਸ਼ਨ ਡਿਫਾਲਟ ਰੂਪ ਵਿੱਚ ਸਕੈਲੀਟਨ ਵਿਊ ਵਿੱਚ ਦਿਖਦੇ ਹਨਸ਼ੈਲਫ ਐਨੋਟੇਸ਼ਨ ਡਿਫਾਲਟ ਰੂਪ ਵਿੱਚ ਸਕੈਲੀਟਨ ਵਿਊ ਵਿੱਚ ਅਡਜਸਟੇਬਲ, ਫਿਕਸਡ ਅਤੇ ਗਲਾਸ ਸ਼ੈਲਫਾਂ ਨੂੰ ਨਿਸ਼ਾਨਿਤ ਕਰਦੇ ਹਨ, ਅਤੇ ਤੁਸੀਂ ਇਹਨਾਂ ਨੂੰ LHS ਪ੍ਰਾਪਰਟੀ ਪੈਨਲ ਤੋਂ ਬੰਦ ਕਰ ਸਕਦੇ ਹੋ।
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- Add a drawer to a cabinet via partition level and drawer setInsert a drawer inside a cabinet from its partition level, then set its heights and add a shelf below if needed.
- ਪੂਰੀ ਕੈਬਿਨੈਟ ਜਾਂ ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਸ਼ਟਰ ਸਿਸਟਮ ਸ਼ਾਮਲ ਕਰੋਖੁੱਲ੍ਹੀ ਕੈਬਿਨੈਟ ਵਿੱਚ ਪੂਰੀ ਤਰ੍ਹਾਂ ਜਾਂ ਸਿਰਫ਼ ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਸ਼ਟਰ ਸਿਸਟਮ ਸ਼ਾਮਲ ਕਰੋ।
- ਸ਼ਟਰ ਬੰਦ ਕਰਕੇ ਅਤੇ ਸ਼ੈਲਫ ਜ਼ੋਨ ਸ਼ਾਮਲ ਕਰਕੇ ਬਾਹਰੀ ਵਾਰਡਰੋਬ ਡਰਾਅਰ ਬਣਾਓਮੌਜੂਦਾ ਸ਼ਟਰ ਹਟਾਓ ਅਤੇ ਸ਼ੈਲਫ ਜ਼ੋਨ ਸ਼ਾਮਲ ਕਰੋ ਤਾਂ ਜੋ ਤੁਸੀਂ ਵਾਰਡਰੋਬ ਵਿੱਚ ਬਾਹਰੀ ਡਰਾਅਰ ਬਣਾ ਸਕੋ।
- ਵੰਡਾਂ, ਸ਼ੈਲਫਾਂ ਅਤੇ ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਵਰਤ ਕੇ ਵਾਰਡਰੋਬ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਬਣਾਓਵਾਰਡਰੋਬ ਦੀਆਂ ਵੰਡਾਂ ਦੇ ਅੰਦਰ Add shelves, ਦਰਾਜ਼ ਪ੍ਰਣਾਲੀਆਂ ਅਤੇ ਬਣਾਵਟ ਦੇ ਵਿਕਲਪ ਵਰਤ ਕੇ ਇਸ ਦਾ ਅੰਦਰੂਨੀ ਹਿੱਸਾ ਬਣਾਓ।
- ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਸ਼ਟਰ ਸ਼ਾਮਲ ਕਰੋਪਾਰਟੀਸ਼ਨ ਨੂੰ ਆਪਣਾ ਸ਼ਟਰ ਦਿਓ ਅਤੇ ਸਿੰਗਲ ਸ਼ਟਰ, ਡਬਲ ਸਵਿੰਗ ਜਾਂ ਲਿਫਟ-ਅੱਪ ਵਿੱਚੋਂ ਚੁਣੋ।
- Add Shutter System ਰਾਹੀਂ ਇੱਕ ਹੀ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਸ਼ਟਰ ਜੋੜੋਕੈਬਿਨੈਟ ਦੀ ਸਿਰਫ਼ ਇੱਕ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਸ਼ਟਰ ਲਗਾਉਣ ਲਈ ਉਹ ਪਾਰਟੀਸ਼ਨ ਚੁਣੋ ਅਤੇ ਇਸ ਦੇ ਵਿਕਲਪਾਂ ਵਿੱਚੋਂ Add Shutter System ਚੁਣੋ।
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- ਸ਼ਟਰਾਂ ਨੂੰ ਪੈਨਲਾਂ ਅਤੇ ਪਾਰਟੀਸ਼ਨਾਂ ਨਾਲ ਸੰਰੇਖਿਤ ਕਰੋਹਰ ਕਿਨਾਰੇ ਦੀਆਂ ਕਟੌਤੀਆਂ ਨੂੰ ਇਸ ਤਰ੍ਹਾਂ ਵਿਵਸਥਿਤ ਕਰੋ ਕਿ ਸ਼ਟਰ ਫਲੱਸ਼ ਬੈਠਣ, ਪੂਰੀ ਉਚਾਈ ਰੱਖਣ ਜਾਂ ਪਾਰਟੀਸ਼ਨ ਨੂੰ ਖੁੱਲ੍ਹਾ ਛੱਡਣ।
- ਕੈਬਿਨੈਟ ਦੀਆਂ ਥਾਵਾਂ ਨੂੰ ਖੜ੍ਹੇ ਪਾਰਟੀਸ਼ਨਾਂ ਨਾਲ ਵੰਡੋਕਿਸੇ ਥਾਂ ਨੂੰ ਵੰਡਣ ਅਤੇ ਉਨ੍ਹਾਂ ਦੀਆਂ ਚੌੜਾਈਆਂ ਅਨੁਪਾਤ ਜਾਂ ਸਪਸ਼ਟ ਮੁੱਲਾਂ ਨਾਲ ਸੈੱਟ ਕਰਨ ਲਈ Add vertical partitions।
- ਡਰਾਅਰ ਸਿਸਟਮ ਕੰਟਰੋਲ ਰਾਹੀਂ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਡਰਾਅਰ ਸ਼ਾਮਲ ਕਰੋ ਜਾਂ ਹਟਾਓਪਾਰਟੀਸ਼ਨ ਸੈਕਸ਼ਨ ਤੋਂ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ Add drawers ਕਰੋ ਅਤੇ ਉਹਨਾਂ ਨੂੰ ਡਰਾਅਰ ਸਿਸਟਮ ਤੋਂ ਹਟਾਓ, ਨਾਲ ਹੀ ਸ਼ੈਲਫ਼ਾਂ ਜਾਂ ਵਰਟੀਕਲ ਪਾਰਟੀਸ਼ਨਾਂ ਵੀ ਸ਼ਾਮਲ ਕਰੋ।
- ਬਣਾਉਣ ਤੋਂ ਪਹਿਲਾਂ ਦਰਾਜ਼, ਸ਼ਟਰ ਅਤੇ ਪਾਰਟੀਸ਼ਨ ਦੀ ਯੋਜਨਾ ਬਣਾਓਅੰਦਰੂਨੀ ਹਿੱਸੇ ਬਦਲਣ ਤੋਂ ਪਹਿਲਾਂ ਸ਼ੈਲਫ ਰਿਵੀਲ, ਪਾਰਟੀਸ਼ਨ ਦੀ ਉਚਾਈ ਅਤੇ ਸ਼ਟਰ ਜਾਂ ਦਰਾਜ਼ ਜ਼ੋਨ ਸੈੱਟ ਕਰੋ।
- ਸਪੇਸ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਸ਼ੈਲਫ ਨਾਲ ਜੋੜ ਕੇ ਡਰਾਅਰ ਸ਼ਾਮਲ ਕਰੋਲੋੜੀਂਦੀ ਉਚਾਈ 'ਤੇ ਪਹਿਲਾਂ ਸ਼ੈਲਫ ਸ਼ਾਮਲ ਕਰਕੇ, ਫਿਰ ਸਪੇਸ ਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਉਸ ਸ਼ੈਲਫ ਨਾਲ ਡਰਾਅਰ ਜੋੜ ਕੇ, ਡਰਾਅਰ ਨੂੰ ਕੰਪਾਰਟਮੈਂਟ ਦੇ ਅੰਦਰ ਰੱਖੋ।
- ਪਾਰਟੀਸ਼ਨ ਦੇ ਕਵਿਕ ਐਕਸੈਸ ਮੀਨੂ ਤੋਂ ਦਰਾਜ਼ ਸੈੱਟ ਸ਼ਾਮਲ ਕਰੋਪਾਰਟੀਸ਼ਨ ਵਿੱਚ ਬਾਹਰੀ ਜਾਂ ਅੰਦਰੂਨੀ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ LHS ਅਤੇ RHS ਦਰਾਜ਼ ਸੈੱਟਾਂ ਨੂੰ ਸਹੀ ਢੰਗ ਨਾਲ ਨਾਲ-ਨਾਲ ਰੱਖੋ।
- ਇੱਕ ਖੜ੍ਹਵੇਂ ਪਾਰਟੀਸ਼ਨ ਨਾਲ ਕੋਲ-ਕੋਲ ਦਰਾਜ਼ ਸ਼ਾਮਲ ਕਰੋਦੋ ਦਰਾਜ਼ਾਂ ਵਿਚਕਾਰ ਇੱਕ ਖੜ੍ਹਵਾਂ ਪਾਰਟੀਸ਼ਨ ਰੱਖ ਕੇ ਅਤੇ ਇਸਦੀ ਉਚਾਈ ਦਰਾਜ਼ ਦੀ ਉਚਾਈ ਦੇ ਬਰਾਬਰ ਕਰਕੇ ਕੋਲ-ਕੋਲ ਦਰਾਜ਼ ਬਣਾਓ।
- ਪਾਰਟੀਸ਼ਨਾਂ ਉੱਤੇ ਸਲਾਈਡਿੰਗ ਅਤੇ ਸਟੈਂਡਰਡ ਸ਼ਟਰ ਮਕੈਨਿਜ਼ਮ ਲਾਗੂ ਕਰੋਸਹੀ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਸ਼ਟਰ ਸਿਸਟਮ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਉਹ ਮਕੈਨਿਜ਼ਮ ਚੁਣੋ ਜਿਸ ਦੀ ਉਹ ਪਾਰਟੀਸ਼ਨ ਆਗਿਆ ਦਿੰਦੀ ਹੈ।
- ਸ਼ਟਰਾਂ ਨੂੰ ਜੋੜਨ ਤੋਂ ਪਹਿਲਾਂ ਵਾਰਡਰੋਬ ਨੂੰ ਮੁੱਖ ਪਾਰਟੀਸ਼ਨਾਂ ਵਿੱਚ ਵੰਡੋਪਹਿਲਾਂ ਵਾਰਡਰੋਬ ਨੂੰ ਮੁੱਖ ਪਾਰਟੀਸ਼ਨਾਂ ਵਿੱਚ ਵੰਡੋ, ਫਿਰ ਸ਼ੈਲਫਾਂ ਅਤੇ ਵਰਟੀਕਲਾਂ ਲਈ ਇਹਨਾਂ ਨੂੰ ਹੋਰ ਉਪ-ਵੰਡੋ, ਅਤੇ ਬਾਅਦ ਵਿੱਚ ਅਨੁਕੂਲਿਤ ਮਕੈਨਿਜ਼ਮਾਂ ਵਾਲੇ ਸ਼ਟਰ ਸਿਸਟਮ ਜੋੜੋ।
- ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਹਟਾਇਆ ਹੋਇਆ ਸ਼ਟਰ ਸਿਸਟਮ ਬਹਾਲ ਕਰੋਜਿਸ ਪਾਰਟੀਸ਼ਨ ਦੇ ਸ਼ਟਰ ਹਟਾ ਦਿੱਤੇ ਗਏ ਸਨ, ਉਸ ਉੱਤੇ ਸਵਿੰਗ ਸ਼ਟਰ ਸਿਸਟਮ ਦੁਬਾਰਾ ਜੋੜੋ, ਜਾਂ None ਨਾਲ ਉਹ ਦੁਬਾਰਾ ਹਟਾ ਦਿਓ।
- ਐਲੀਵੇਸ਼ਨ ਪਸੰਦਾਂ ਵਿੱਚ ਸ਼ਟਰ ਦਿਸ਼ਾ, ਯੂਨਿਟ ਅਤੇ ਸ਼ੈਲਫ ਐਨੋਟੇਸ਼ਨਾਂ ਨੂੰ ਟੌਗਲ ਕਰੋਐਲੀਵੇਸ਼ਨ ਪਸੰਦਾਂ ਵਿੱਚ ਸ਼ਟਰ ਦਿਸ਼ਾਵਾਂ, ਯੂਨਿਟ ਐਨੋਟੇਸ਼ਨਾਂ ਅਤੇ ਸ਼ੈਲਫ ਐਨੋਟੇਸ਼ਨਾਂ ਨੂੰ ਚਾਲੂ ਜਾਂ ਬੰਦ ਕਰਕੇ ਨਿਯੰਤਰਿਤ ਕਰੋ ਕਿ ਕਿਹੜੀਆਂ ਐਲੀਵੇਸ਼ਨ ਐਨੋਟੇਸ਼ਨਾਂ ਦਿਖਾਈ ਦੇਣ।
- ਉਲੰਘਣਾਂ ਦੀ ਸੂਚੀ ਤੋਂ ਹਿੰਜ ਅਤੇ ਸ਼ੈਲਫ ਟਕਰਾਵਾਂ ਨੂੰ ਆਟੋ-ਸਾਲਵ ਕਰੋਆਟੋ-ਸਾਲਵ ਵਿਕਲਪ ਦੀ ਵਰਤੋਂ ਕਰੋ ਜਦੋਂ ਉਲੰਘਣਾਂ ਦੀ ਜਾਂਚ ਕਿਸੇ ਟਕਰਾਅ ਦੀ ਰਿਪੋਰਟ ਕਰਦੀ ਹੈ, ਜਿਵੇਂ ਕਿ ਇੱਕ ਹਿੰਜ ਉਸੇ ਥਾਂ ਉੱਤੇ ਰੱਖਿਆ ਗਿਆ ਹੋਵੇ ਜਿੱਥੇ ਇੱਕ ਫਿਕਸਡ ਸ਼ੈਲਫ ਹੈ।
- ਹਿੰਜ-ਸ਼ੈਲਫ ਟਕਰਾਅ ਪਛਾਣ ਲਈ ਹਿੰਜ ਦੇ ਮਾਪ ਕਨਫਿਗਰ ਕਰੋਹਰ ਹਿੰਜ ਕਿਸਮ ਲਈ ਮਾਪ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਕਨਫਿਗਰ ਕਰੋ ਤਾਂ ਜੋ ਹਿੰਜ-ਸ਼ੈਲਫ ਟਕਰਾਅ ਦਾ ਪਤਾ ਲੱਗ ਸਕੇ।
- ਪਾਰਟੀਸ਼ਨ ਮਾਪ ਨੂੰ ਨੈਗੇਟਿਵ ਆਫਸੈੱਟ ਨਾਲ ਬਦਲ ਕੇ ਦਰਾਜ਼ ਦੇ ਫੈਸੀਆ ਦੀ ਉਚਾਈ ਸੈੱਟ ਕਰੋਦੇਖੋ ਕਿ ਜਦੋਂ ਤੁਸੀਂ ਨੈਗੇਟਿਵ ਆਫਸੈੱਟ ਨਾਲ ਦਰਾਜ਼ ਦੇ ਫੈਸੀਆ ਦੀ ਉਚਾਈ ਸੈੱਟ ਕਰਦੇ ਹੋ ਤਾਂ ਦਿਖਾਈ ਦੇਣ ਵਾਲੀ ਪਾਰਟੀਸ਼ਨ ਉਚਾਈ ਪੂਰੀ ਉਚਾਈ ਵਿੱਚੋਂ ਪੈਨਲ ਦੀ ਮੋਟਾਈ ਘਟਾ ਕੇ ਕਿਵੇਂ ਬਣਦੀ ਹੈ।
- ਕੈਬਿਨੈੱਟ ਪੈਨਲ ਦੇ ਆਪਣੇ ਪੱਧਰ 'ਤੇ ਫਿਨਿਸ਼ ਅਤੇ ਸ਼ੈਲਫ ਵਿਕਲਪ ਸੈੱਟ ਕਰੋਕੈਬਿਨੈੱਟ ਪੈਨਲ ਦੇ ਆਪਣੇ ਪੱਧਰ ਨੂੰ ਖੋਲ੍ਹੋ ਤਾਂ ਜੋ ਇਸ ਦੇ ਬਾਹਰੀ ਅਤੇ ਅੰਦਰੂਨੀ ਫਿਨਿਸ਼ ਦਾ ਸਰੋਤ ਚੁਣ ਸਕੋ, ਸਿਰਫ਼ ਉਸ ਪੈਨਲ ਲਈ ਕਸਟਮ ਫਿਨਿਸ਼ ਚੁਣੋ, ਅਤੇ ਸ਼ੈਲਫ ਦੀ ਕਿਸਮ ਅਤੇ ਦਿੱਖ ਸੈੱਟ ਕਰੋ।
- ਕੈਬਿਨੈੱਟ, ਪਾਰਟੀਸ਼ਨ, ਸ਼ਟਰ ਅਤੇ ਪੈਨਲ ਕੰਟਰੋਲ ਤੱਕ ਪਹੁੰਚਣ ਲਈ ਚੋਣ ਰੁੱਖ ਦੀ ਵਰਤੋਂ ਕਰੋਕੈਬਿਨੈੱਟ ਦਾ ਕੋਈ ਹਿੱਸਾ ਚੁਣੋ ਤਾਂ ਕਿ ਇਸ ਤੋਂ ਉੱਪਰਲੇ ਪੱਧਰ ਦਿਸਣ ਅਤੇ ਤੁਸੀਂ ਸਿੱਧੇ ਲੋੜੀਂਦੇ ਕੰਟਰੋਲ ਤੱਕ ਪਹੁੰਚ ਸਕੋ।
- ਖੜ੍ਹੇ ਵਿਭਾਜਕ ਨਾਲ ਨਾਲ-ਨਾਲ ਦਰਾਜ਼ੇ ਹੱਥੀਂ ਬਣਾਓਇੱਕ ਸ਼ੈਲਫ ਅਤੇ ਇੱਕ ਖੜ੍ਹਾ ਵਿਭਾਜਕ ਜੋੜ ਕੇ, ਫਿਰ ਹਰ ਪਾਸੇ ਇੱਕ ਦਰਾਜ਼ਾ ਰੱਖ ਕੇ ਨਾਲ-ਨਾਲ ਦਰਾਜ਼ੇ ਬਣਾਓ।
- ਸਕੈਲੀਟਨ ਮੋਡ ਨਾਲ ਕੈਬਿਨੈਟ ਦੇ ਅੰਦਰੂਨੀ ਪਾਰਟੀਸ਼ਨਾਂ ਦਾ ਮਾਪਅੰਦਰੂਨੀ ਪਾਰਟੀਸ਼ਨਾਂ ਦੇ ਮਾਪ ਜੋੜਨ ਲਈ ਸਕੈਲੀਟਨ ਮੋਡ ਚਾਲੂ ਕਰੋ, ਜਾਂ ਪਾਰਟੀਸ਼ਨਾਂ ਦਾ ਮਾਪ ਹੱਥ ਨਾਲ ਲਓ।
- ਪਾਰਟੀਸ਼ਨ ਦੀ ਉਚਾਈ, ਡੂੰਘਾਈ ਅਤੇ ਸ਼ੈਲਫ ਰਿਵੀਲ ਵਰਤ ਕੇ ਪਾਰਟੀਸ਼ਨ ਪੈਨਲ ਦੀ ਸਥਿਤੀ ਤੈਅ ਕਰੋਕਸਟਮ ਪੈਨਲ ਜੋੜ ਕੇ, ਉਸਨੂੰ ਘੁਮਾ ਕੇ, ਅਤੇ ਉਸਦਾ ਖੱਬੇ-ਸੱਜੇ ਦਾ ਮਾਪ ਅਤੇ X ਅਤੇ Y ਸਥਿਤੀਆਂ ਸੈੱਟ ਕਰਕੇ ਇੱਕ ਖਿਤਿਜੀ ਪਾਰਟੀਸ਼ਨ ਪੈਨਲ ਰੱਖੋ।
- ਕੈਬਿਨੈਟ ਜਾਂ ਪਾਰਟੀਸ਼ਨ ਉੱਤੇ ਬਾਹਰੀ ਅਤੇ ਅੰਦਰੂਨੀ ਸੀਮਾਵਾਂ ਲਈ ਸਾਈਜ਼ਿੰਗ ਨਿਯਮ ਸੈੱਟ ਕਰੋਚੁਣੋ ਕਿ ਯੂਨਿਟ ਦੀਆਂ ਸੀਮਾਵਾਂ ਇਸ ਦੇ ਬਾਹਰੀ ਮਾਪਾਂ ਉੱਤੇ ਲਾਗੂ ਹੁੰਦੀਆਂ ਹਨ ਜਾਂ ਇਸ ਦੀ ਅੰਦਰੂਨੀ ਖਾਲੀ ਥਾਂ ਉੱਤੇ, ਅਤੇ ਇਹਨਾਂ ਨੂੰ ਇੱਕ ਸਮੇਂ ਇੱਕ ਯੂਨਿਟ ਉੱਤੇ ਜਾਂ ਇੱਕਠਿਆਂ ਲਾਗੂ ਕਰੋ।
- ਕੰਸਟ੍ਰਕਸ਼ਨ ਡਿਫਾਲਟ ਪਾਰਟੀਸ਼ਨ ਸੈਟਿੰਗਾਂ ਨਾਲ ਕੈਬਿਨੈਟ ਦੇ ਪਿਛਲੇ ਪੈਨਲ ਨੂੰ ਵੰਡੋਇੱਕ ਕੈਬਿਨੈਟ ਚੁਣੋ ਅਤੇ ਪਿਛਲੇ ਪੈਨਲ ਨੂੰ ਵੰਡਣ ਜਾਂ ਲੰਬਕਾਰੀ ਵਿਭਾਜਕ ਜੋੜਨ ਲਈ ਇਸ ਦੀਆਂ ਕੰਸਟ੍ਰਕਸ਼ਨ ਡਿਫਾਲਟ ਪਾਰਟੀਸ਼ਨ ਆਪਸ਼ਨਾਂ ਦੀ ਵਰਤੋਂ ਕਰੋ।
- Split top and bottom panels ਪ੍ਰਤੀ ਲੰਬਕਾਰੀ ਵੰਡਕੈਬਿਨੈੱਟ ਦੇ ਉੱਪਰਲੇ ਅਤੇ ਹੇਠਲੇ ਪੈਨਲਾਂ ਨੂੰ ਹਰ ਲੰਬਕਾਰੀ ਭਾਗ ਲਈ ਇੱਕ ਟੁਕੜੇ ਵਿੱਚ ਵੰਡੋ, ਤਾਂ ਜੋ ਹਰ ਟੁਕੜਾ ਆਪਣੇ ਭਾਗ ਦੀ ਚੌੜਾਈ ਅਨੁਸਾਰ ਹੋਵੇ ਅਤੇ ਕਿਨਾਰਿਆਂ ਵਾਲੇ ਟੁਕੜੇ ਆਪਣੇ ਆਪ ਪਾਸਿਆਂ ਉੱਤੇ ਫੈਲ ਜਾਣ।
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
ਹੋਰ ਗਾਈਡਾਂ 2
ਸਭ ਵੇਖੋ (2)
- ਐਡਜਸਟੇਬਲ ਸ਼ੈਲਫਾਂ ਦਾ ਆਕਾਰ ਫਿਕਸਡ ਸ਼ੈਲਫਾਂ ਤੋਂ ਵੱਖਰਾ ਕਿਵੇਂ ਹੁੰਦਾ ਹੈਜਾਣੋ ਕਿ ਐਡਜਸਟੇਬਲ ਸ਼ੈਲਫਾਂ ਫਿਕਸਡ ਸ਼ੈਲਫਾਂ ਨਾਲੋਂ ਥੋੜ੍ਹੀਆਂ ਤੰਗ ਕਿਉਂ ਬਣਾਈਆਂ ਜਾਂਦੀਆਂ ਹਨ ਅਤੇ ਜਦੋਂ ਸ਼ੈਲਫ ਨੂੰ ਫਿਕਸਡ ਕੀਤਾ ਜਾਂਦਾ ਹੈ ਤਾਂ ਇਹ ਕਿਵੇਂ ਬਦਲਦਾ ਹੈ।
- ਜਾਣੋ ਕਿ ਕਨਫਿਗਰੇਸ਼ਨ ਲਾਗੂ ਕਰਨ, ਹਟਾਉਣ ਜਾਂ ਬਦਲਣ ਨਾਲ ਕੀ ਸਾਫ਼ ਹੁੰਦਾ ਹੈਜਾਣੋ ਕਿ ਕਨਫਿਗਰੇਸ਼ਨ ਬਦਲਣ 'ਤੇ ਪਾਰਟੀਸ਼ਨ ਦੇ ਕਿਹੜੇ ਹਿੱਸੇ ਬਚਦੇ ਹਨ ਅਤੇ ਕਿਹੜੇ ਇਸ ਨਾਲ ਹਟ ਜਾਂਦੇ ਹਨ।