পাৰ্টিচন, চেল্ফ আৰু আভ্যন্তৰীণ অংশ
গাইড: 104
- পাৰ্টিশ্যন, শেল্ফ, ড্ৰয়াৰ আৰু শাটাৰ যোগ কৰক আৰু কনফিগাৰ কৰকপাৰ্টিশ্যন স্তৰত উপাদান যোগ কৰক, যাতে প্ৰতিটো শেল্ফ, ড্ৰয়াৰ ছেট বা শাটাৰ ছিষ্টেম কেৱল ইউনিটৰ সেই অংশতহে প্ৰযোজ্য হয়।
- শেলফ অনুবাদ নকৰি পাৰ্টিশ্যনৰ জোখ সলনি কৰকপাৰ্টিশ্যন লেভেলসমূহ পৰিবৰ্তন কৰি কেবিনেট এটা সমন্বয় কৰক, পাৰ্টিশ্যন লেভেলত শাটাৰ ব্যৱস্থা যোগ কৰক, আৰু শেলফ অনুবাদ নকৰিব যাতে শেলফটোৱে পাৰ্টিশ্যনৰ বিন্যাসৰ সৈতে মিলি থাকে।
- Add shelves ৰ জৰিয়তে পাৰ্টিশ্বন আৰু শ্বাটাৰ ছিষ্টেমৰ জৰিয়তে শ্বাটাৰপাৰ্টিশ্বন অপশ্যনৰ সৈতে এটা শেল্ফ যোগ কৰক আৰু Add Shutter System অপশ্যনৰ সৈতে শ্বাটাৰ যোগ কৰক, তাৰ পিছত মেকানিজমটো ছিংগল বা ডাবল ছুইংলৈ ছেট কৰক।
- Adjust shelf reveal at partition or panel levelChange the shelf reveal at partition level or move a single shelf's front edge at panel level so internal shelves clear a clash.
- পাৰ্টিশ্যন বিভাজন নিয়ন্ত্ৰণ কৰিবলৈ আৰু ড্ৰয়াৰ যোগ কৰিবলৈ নিৰ্দিষ্ট উচ্চতা নিৰ্ধাৰণ কৰকএখন চেল্ফ বা উলম্ব পাৰ্টিশ্যনৰে কেবিনেট পাৰ্টিশ্যন বিভক্ত কৰক, এটা অংশত নিৰ্দিষ্ট উচ্চতা নিৰ্ধাৰণ কৰি তাৰ আকাৰ নিৰ্ধাৰণ কৰক, তাৰ পিছত এটা হেঙিং ৰড বা চেল্ফ যোগ কৰক।
- বাহিৰৰ শ্বাটাৰ আৰু ড্ৰয়াৰৰ বাবে শেল্ফ ৰিভিল শূন্যলৈ ছেট কৰকশেল্ফ ৰিভিল শূন্যলৈ ছেট কৰক, যাতে বাহিৰৰ শ্বাটাৰ আৰু ড্ৰয়াৰসমূহ ভিতৰৰ শেল্ফৰ ব্যৱধানৰ দ্বাৰা অফছেট নহয়।
- ৱাৰ্ড্ৰবৰ শেল্ফ আৰু হিঞ্জৰ বাবে ৫ মিমিৰ পৰা ডাঙৰ ৰিভিল নিৰ্ধাৰণ কৰকৱাৰ্ড্ৰবৰ শেল্ফ আৰু হিঞ্জে ইটোৱে সিটোত খুন্দা নাখোৱাকৈ যথেষ্ট ডাঙৰ শেল্ফ ৰিভিল বাছনি কৰক, তাৰ পিছত হিঞ্জৰ অৱস্থানৰ সৈতে পৰীক্ষা কৰক।
- Add a vertical partition and drawers on either sideChoose which side a vertical partition goes on, then add and configure drawers on each side once the vertical and shelves are in place.
- পাৰ্টিশ্যনত Add shelves কৰক আৰু শেল্ফ ৰিভিল শূন্যলৈ ছেট কৰকনিৰ্বাচিত পাৰ্টিশ্যন স্পেচত Add shelves কৰক আৰু শেল্ফ ৰিভিল শূন্যলৈ ছেট কৰক, যাতে সন্মুখৰ পৰা কোনো ফাঁক নাথাকে।
- পাৰ্টিচন আৰু ৱাৰড্ৰবত শ্বেলফ ৰিভিল পৰিচালনা কৰকশ্বেলফ ৰিভিলে কেনেকৈ নেষ্টেড পাৰ্টিচনলৈ যায় আৰু একেলগে কেইবাটাও ৱাৰড্ৰবত কেনেকৈ প্ৰয়োগ কৰিব, সেয়া বুজি লওক।
- এটা পাৰ্টিচন বিভক্ত কৰক আৰু সন্তান পাৰ্টিচনসমূহ সম্পাদনা কৰকপিতৃ অঞ্চলটো বিভক্ত কৰিবলৈ পাৰ্টিচন স্তৰত এটা পাৰ্টিচন যোগ কৰক আৰু প্ৰতিটো সন্তান পাৰ্টিচন নিজাকৈ সম্পাদনা কৰক।
- ৱাৰড্ৰবত পৃথক বিভাজনসমূহৰ সৈতে কাম কৰকবিভক্ত ৱাৰড্ৰবৰ প্ৰতিটো বিভাজন নিজাকৈ বাছনি কৰক, যাতে কেৱল এটা অংশত শ্বাটাৰ যোগ কৰিব পাৰে বা আনবোৰত নোচোৱাকৈ তাৰ তাকবোৰ সলনি কৰিব পাৰে।
- কেবিনেট জ'নৰ ভিতৰত পাৰ্টিশ্বন আৰু গ্লাছ যোগ কৰককেবিনেট জ'নৰ ভিতৰৰ খালী ঠাইত পাৰ্টিশ্বন যোগ কৰি কেবিনেটৰ ভিতৰভাগ সমানে ভাগ কৰক।
- পেনেল ছেকচন কনষ্ট্ৰাকচনৰ জৰিয়তে এটা শেলফত প্ৰফাইল যোগ কৰকপ্ৰয়োজনীয় ফালে পেনেল ছেকচনৰ construction/top ছেটিংছৰ পৰা যোগ কৰি এটা শেলফত এটা প্ৰফাইল ৰাখক।
- Add shelves and hanging space by clicking on partitionsClick a partition to add shelves and hanging space inside a wardrobe, and plan around drawers at the bottom.
- শ্বাটাৰৰ স্থানত ২০ বা ২৫ ৰ এটা শেল্ফ ৰিভিল প্ৰয়োগ কৰকশ্বাটাৰৰ স্থানত ২০ বা ২৫ ৰ এটা শেল্ফ ৰিভিল প্ৰয়োগ কৰক, যাতে ড্ৰয়াৰ ছেট যোগ কৰাৰ আগতে শেল্ফ আৰু পাৰ্টিশ্বনসমূহ স্থাপন হয়।
- ৱাৰড্ৰবৰ পাৰ্টিশ্যন, শেল্ফ আৰু জ'নসমূহ কাষ্টমাইজ কৰকগ্ৰাহকৰ প্ৰয়োজন অনুসৰি পাৰ্টিশ্যন, শেল্ফ আৰু জ'নসমূহ সজাই তোলক, য'ত দীঘল ওলোমোৱা ঠাই বা ড্ৰয়াৰৰ বিন্যাসো অন্তৰ্ভুক্ত।
- পাৰ্টিশ্যন এটা নিৰ্দিষ্ট উচ্চতালৈ ছেট কৰি ইয়াৰ উচ্চতা সলনি কৰকপাৰ্টিশ্যন এটা নিৰ্দিষ্ট উচ্চতালৈ সলনি কৰি আৰু প্ৰয়োজনীয় উচ্চতা লিখি ইয়াক ওখ বা চুটি কৰক।
- ৱাৰড্ৰব পছন্দত শেলফ আৰু পাৰ্টিশ্যনৰ কাষৰ দৃশ্যমানতা নিৰ্ধাৰণ কৰকCabinet Preference / Wardrobe Preference ত স্থিৰ শেলফ, সমন্বয়যোগ্য শেলফ আৰু উলম্ব পাৰ্টিশ্যন পেনেলৰ বাবে front/carcass visible edge band ক carcass invisible লৈ নিৰ্ধাৰণ কৰক।
- ফ্লাছ শ্বেলফৰ বাবে শ্বেলফ ৰিভিল আৰু ফ্ৰণ্ট গেপ শূন্যলৈ ছেট কৰকশ্বেলফবোৰ ফ্লাছ কৰিবলৈ বাওঁফালৰ পেনেলত থকা শ্বেলফ/পেনেল নিৰ্মাণ ছেটিংছত শ্বেলফ ৰিভিল আৰু ফ্ৰণ্ট গেপ সম্পাদনা কৰক।
- পাৰ্টিশ্বন আৰু কনফিগাৰেশ্যনত শ্বেল্ফ ৰিভিল ছেট কৰকপাৰ্টিশ্বনৰ শ্বেল্ফ ৰিভিল ছেট কৰক, ডিজাইনৰ ৰিভিল ৰাখক বা কনফিগাৰেশ্যনক পেৰেণ্টৰ মান ল'বলৈ দিয়ক।
- শ্বেলফবোৰ স্থিৰ বা সমন্বয়যোগ্য কৰি সেট কৰক আৰু পাৰ্টিশ্যনৰ আকাৰ নিৰ্ধাৰণ কৰকস্থিৰ বা সমন্বয়যোগ্য শ্বেলফ বাছনি কৰক আৰু পাৰ্টিশ্যনৰ ওপৰতে পাৰ্টিশ্যনৰ প্ৰস্থ আৰু অনুপাত সেট কৰক।
- পাৰ্টিচনসমূহ বুজি লওক আৰু এখন কেবিনেটৰ ভিতৰত শেল্ফ, পেনেল বা ড্ৰয়াৰ যোগ কৰকInfurnia ত পাৰ্টিচন কি সেই বিষয়ে জানক আৰু পাৰ্টিচন স্তৰত শেল্ফ, উলম্ব পেনেল বা ড্ৰয়াৰ যোগ কৰক।
- Why a shelf or partition cannot be deletedLearn why a shelf or partition panel may be protected from deletion and how to work around it.
- শ্বাটাৰ আৰু ড্ৰয়াৰৰ মাজত এখন শেল্ফ সমন্বিত কৰকশ্বাটাৰ আৰু ড্ৰয়াৰৰ মাজত এখন শেল্ফৰ পূৰ্বনিৰ্ধাৰিত অৱস্থান ক'ত থাকে আৰু এক্সটেনশ্বন সমন্বয় কৰি ইয়াৰ সমন্বয় কেনেকৈ সলনি কৰিব পাৰি, সেয়া শিকক।
- Change a shelf from adjustable to fixedShelves added at partition level start out adjustable, and you can make one fixed by changing its type at panel level.
- পূৰ্বনিৰ্ধাৰিত পাৰ্টিশ্বন বিন্যাস এটা বাছনি কৰকস্বতন্ত্ৰ ইউনিট এটা এটাকৈ ৰখাৰ পৰিৱৰ্তে, যাৰ ফিলাৰ ফালৰ প্ৰয়োজনীয়তাৰ সৈতে মিলে এনে এটা সাজু লেআউট বাছনি কৰক।
- শেলফ আৰু উলম্ব স্থানসমূহ সমানে বা সঠিক জোখ অনুসৰি ভাগ কৰকAdd shelves আৰু উলম্বসমূহে ডিফল্টভাৱে স্থান সমানে ভাগ কৰে, বা এটা স্থান বাছি লৈ সঠিক জোখ দি তাক অসমভাৱে ভাগ কৰিব পাৰে।
- ডিফল্ট শ্বেলফ ৰিভিল দূৰত্বে কেনেকৈ কাম কৰেশ্বেলফ ৰিভিল দূৰত্ব ডিফল্টভাৱে কিমান নিৰ্ধাৰিত আৰু কেটেলগ এন্ট্ৰি সৃষ্টি কৰোঁতে আপুনি ইয়াক কিয় লিপিবদ্ধ কৰে, সেয়া জানি লওক।
- এটা পাৰ্টিশ্যন ছেকশ্যন লক কৰক আৰু ইয়াৰ সঠিক উচ্চতা নিৰ্ধাৰণ কৰকএটা পাৰ্টিশ্যন ছেকশ্যন fixed লৈ সলনি কৰক, ইয়াক dimension দিয়ক আৰু সঠিক পাৰ্টিশ্যন উচ্চতা নিৰ্ধাৰণ কৰক।
- ভিতৰৰ শেলফ স্থিৰ কৰি শ্বাটাৰৰ মেটেৰিয়েল নিৰ্ধাৰণ কৰককেবিনেটৰ ভিতৰৰ শেলফখন স্থিৰ পেনেল হিচাপে নিৰ্ধাৰণ কৰক আৰু সন্মুখৰ পৰা ২০ মিমি কমাই দিয়ক।
- Front shift ৰ সৈতে ৱালৰ পৰা আগলৈ পাৰ্টিশ্বন আৰু পেটাৰ্ন অফছেট কৰকৱালৰ পৰা এটা আগলৈ অফছেট নিৰ্ধাৰণ কৰক যাতে পাৰ্টিশ্বন, ৰাফটাৰ আৰু আঁকা পেটাৰ্ন আপুনি বিচৰা দূৰত্বত থাকে।
- গঠনত শেলফ যোগ কৰাৰ আগতে উলম্ব পাৰ্টিচন আঁতৰাওকউলম্ব পাৰ্টিচন থকা ঠাইত শেলফ ৰাখিবলৈ প্ৰথমে পাৰ্টিচন আঁতৰাওক, শেলফ যোগ কৰক, তাৰ পিছত উলম্ব পাৰ্টিচনৰ পদক্ষেপলৈ ঘূৰি যাওক।
- L-কৰ্ণাৰ পাৰ্টিশ্যন Front Major বা Side Major-ত বিভক্ত কৰকL-কৰ্ণাৰ পাৰ্টিশ্যন বিভক্ত কৰক, প্ৰতিটো অংশত শেল্ফ যোগ কৰক আৰু পেনেলৰ মাপসমূহ মিলাওক।
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- পাৰ্টিশ্যন ছেকচনসমূহ কেনেকৈ স্বয়ংক্ৰিয়ভাৱে আকাৰ নিৰ্ধাৰণ আৰু লক হয়স্বয়ংক্ৰিয় আৰু স্থিৰ পাৰ্টিশ্যন ছেকচনে কেনেকৈ স্থান ভাগ কৰে আৰু এটা ছেকচন কিয় সদায় স্বয়ং-সমন্বয় হৈ থাকে, চাওক।
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- সংৰক্ষিত পাৰ্টিশ্যন কনফিগাৰেচন এটা পাৰ্টিশ্যনত লোড কৰকপাৰ্টিশ্যন এটাৰ 'Partition Configuration' ড্ৰপডাউন খুলি সংৰক্ষিত কনফিগাৰেচন এটা প্ৰয়োগ কৰক আৰু ই ছেক্সনত খাপ খায় নে পৰীক্ষা কৰক।
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- শেল্ফ টোকা সমূহে ডিফল্টভাৱে skeleton view ত দেখুৱায়শেল্ফ টোকা সমূহে ডিফল্টভাৱে skeleton view ত সমন্বয়যোগ্য, স্থিৰ আৰু কাঁচৰ শেল্ফ চিহ্নিত কৰে, আৰু আপুনি LHS property panel ৰ পৰা সেইবোৰ বন্ধ কৰিব পাৰে।
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- পাৰ্টিশ্যন স্তৰ আৰু ড্ৰয়াৰ ছেটৰ জৰিয়তে কেবিনেটত ড্ৰয়াৰ যোগ কৰককেবিনেটৰ পাৰ্টিশ্যন স্তৰৰ পৰা কেবিনেটৰ ভিতৰত ড্ৰয়াৰ সুমুৱাওক, তাৰ পিছত ইয়াৰ উচ্চতা নিৰ্ধাৰণ কৰক আৰু প্ৰয়োজন হ'লে তলত এটা শেলফ যোগ কৰক।
- গোটেই কেবিনেট বা এটা মাত্ৰ পাৰ্টিশ্যনত শ্বাটাৰ ছিষ্টেম যোগ কৰকএখন খোলা কেবিনেটত গোটেইখনতে বা এটা মাত্ৰ পাৰ্টিশ্যনত শ্বাটাৰ ছিষ্টেম যোগ কৰক।
- Create external wardrobe drawers by removing shutters and adding a shelf zoneRemove the existing shutters and add a shelf zone so you can create external drawers in a wardrobe.
- পাৰ্টিশ্যন, শেল্ফ আৰু ড্ৰয়াৰ চিষ্টেম ব্যৱহাৰ কৰি ৱাৰ্ড্ৰবৰ ভিতৰৰ অংশ নিৰ্মাণ কৰকৱাৰ্ড্ৰবৰ পাৰ্টিশ্যনৰ ভিতৰত Add shelves, ড্ৰয়াৰ চিষ্টেম আৰু নিৰ্মাণৰ বিকল্পসমূহ যোগ কৰি ইয়াৰ ভিতৰৰ অংশ নিৰ্মাণ কৰক।
- পাৰ্টিচনত এটা শ্বাটাৰ যোগ কৰকপাৰ্টিচনক ইয়াৰ নিজৰ শ্বাটাৰ দিয়ক আৰু এটা একক শ্বাটাৰ, দুটা দিশৰ ছুইং বা লিফ্ট-আপৰ মাজত বাছনি কৰক।
- Add Shutter System ৰ জৰিয়তে এটা অকলশৰীয়া পাৰ্টিচনত এখন শাটাৰ যোগ কৰককেবিনেটৰ কেৱল এটা পাৰ্টিচনত শাটাৰ স্থাপন কৰিবলৈ সেই পাৰ্টিচনটো বাছনি কৰি ইয়াৰ অপশ্বনসমূহৰ পৰা Add Shutter System বাছনি কৰক।
- Add drawers ৰ জৰিয়তে পাৰ্টিশ্বন বাছনি কৰি, আনডু কৰি নহয়প্ৰতিটো ড্ৰয়াৰ য'ত থাকিব লাগে সেই পাৰ্টিশ্বন বাছনি কৰি আৰু পৰিমাণ লিখি এটা ইউনিটত এটা বা ততোধিক ড্ৰয়াৰ যোগ কৰক।
- শ্বাটাৰবোৰ পেনেল আৰু পাৰ্টিশ্যনৰ সৈতে মিলাওকপ্ৰতিটো কাষৰ হ্ৰাস এনেদৰে সমন্বয় কৰক যাতে শ্বাটাৰবোৰ সমতলভাৱে বহে, সম্পূৰ্ণ উচ্চতাত থাকে বা পাৰ্টিশ্যন এটা ঢাকি নধৰে।
- উলম্ব পাৰ্টিচনৰ সৈতে কেবিনেটৰ স্থান বিভক্ত কৰকস্থান এটা ভাগ কৰিবলৈ আৰু অনুপাত বা স্পষ্ট মানৰ দ্বাৰা ইহঁতৰ প্ৰস্থ নিৰ্ধাৰণ কৰিবলৈ Add vertical partitions ব্যৱহাৰ কৰক।
- ড্ৰয়াৰ চিষ্টেম নিয়ন্ত্ৰণৰ জৰিয়তে এটা পাৰ্টিচনত ড্ৰয়াৰ যোগ কৰক বা আঁতৰাওকপাৰ্টিচন শাখাৰ পৰা এটা পাৰ্টিচনত Add drawers কৰক আৰু ড্ৰয়াৰ চিষ্টেমৰ পৰা সেইবোৰ আঁতৰাওক, লগতে শেল্ফ বা উলম্ব পাৰ্টিচন যোগ কৰক।
- নিৰ্মাণ কৰাৰ আগতে ড্ৰয়াৰ, শ্বাটাৰ আৰু পাৰ্টিচন পৰিকল্পনা কৰকইণ্টাৰ্নেলসমূহ কাষ্টমাইজ কৰাৰ আগতে শ্বেলফ ৰিভিল, পাৰ্টিচনৰ উচ্চতা আৰু শ্বাটাৰ বা ড্ৰয়াৰ জ’ন নিৰ্ধাৰণ কৰক।
- স্থান বিভাজনত এটা শেল্ফত সংযুক্ত কৰি এটা ড্ৰয়াৰ যোগ কৰকপ্ৰথমে প্ৰয়োজনীয় উচ্চতাত এটা শেল্ফ যোগ কৰি আৰু তাৰ পিছত স্থান বিভাজনত সেই শেল্ফত ড্ৰয়াৰটো সংযুক্ত কৰি এটা খোপৰ ভিতৰত এটা ড্ৰয়াৰ ৰাখক।
- পাৰ্টিশ্যনৰ quick access menuৰ পৰা এটা ড্ৰয়াৰ ছেট যোগ কৰকপাৰ্টিশ্যনত বাহিৰা বা ভিতৰৰ ড্ৰয়াৰ যোগ কৰক আৰু LHS আৰু RHS ড্ৰয়াৰ ছেট শুদ্ধভাৱে কাষে কাষে ৰাখক।
- উল্লম্ব পাৰ্টিচনৰ সৈতে কাষে কাষে ড্ৰয়াৰ যোগ কৰকড্ৰয়াৰবোৰৰ মাজত এটা উল্লম্ব পাৰ্টিচন ৰাখি আৰু ইয়াৰ জোখ ড্ৰয়াৰৰ উচ্চতাৰ সমান কৰি কাষে কাষে ড্ৰয়াৰ সৃষ্টি কৰক।
- পাৰ্টিশ্যনত স্লাইডিং আৰু ষ্টেণ্ডাৰ্ড শ্বাটাৰ মেকানিজম প্ৰয়োগ কৰকসঠিক পাৰ্টিশ্যনত এটা শ্বাটাৰ চিষ্টেম যোগ কৰক আৰু সেই পাৰ্টিশ্যনে অনুমোদন কৰা এটা মেকানিজম বাছনি কৰক।
- শ্বাটাৰ যোগ কৰাৰ আগতে ৱাৰ্ড্ৰবখন মূল পাৰ্টিচনত ভাগ কৰকপ্ৰথমে ৱাৰ্ড্ৰবখন মূল পাৰ্টিচনত ভাগ কৰক, তাৰ পিছত শেল্ফ আৰু ভাৰ্টিকেলৰ বাবে সেইবোৰ উপ-ভাগ কৰক, আৰু শেষত কাষ্টমাইজ কৰা মেকানিজমৰ সৈতে শ্বাটাৰ ছিষ্টেম যোগ কৰক।
- এটা partition-ৰ পৰা আঁতৰোৱা shutter ব্যৱস্থা পুনৰুদ্ধাৰ কৰকযি partition-ৰ shutter আঁতৰোৱা হৈছিল, তাত swing shutter ব্যৱস্থা পুনৰ যোগ কৰক, বা None ৰে পুনৰ আঁতৰাওক।
- এলিভেচন পছন্দসমূহত শ্বাটাৰৰ দিশ, ইউনিট আৰু শেলৰ টোকা সলনি কৰকএলিভেচন পছন্দসমূহত শ্বাটাৰৰ দিশ, ইউনিটৰ টোকা আৰু শেলৰ টোকা অন বা অফ কৰি কোনবোৰ এলিভেচন টোকা দেখুৱাব সেইটো নিয়ন্ত্ৰণ কৰক।
- উলংঘনৰ তালিকাৰ পৰা হিঞ্জ আৰু শেল্ফৰ সংঘৰ্ষ স্বয়ংক্ৰিয়ভাৱে সমাধান কৰকউলংঘন পৰীক্ষাই সংঘৰ্ষৰ কথা জনালে, যেনে এটা নিৰ্দিষ্ট শেল্ফৰ সৈতে একে স্থানত ৰখা হিঞ্জ, তেতিয়া স্বয়ংক্ৰিয় সমাধানৰ বিকল্প ব্যৱহাৰ কৰক।
- হিঞ্জ-শেল্ফৰ সংঘৰ্ষ চনাক্তকৰণৰ বাবে হিঞ্জৰ জোখ কনফিগাৰ কৰকহিঞ্জ-শেল্ফৰ সংঘৰ্ষ চনাক্ত কৰিব পৰাকৈ প্ৰতিটো হিঞ্জৰ প্ৰকাৰৰ বাবে জোখ পৃথকে পৃথকে কনফিগাৰ কৰক।
- ঋণাত্মক অফছেটেৰে partition dimension সলনি কৰি drawer fascia ৰ উচ্চতা নিৰ্ধাৰণ কৰকঋণাত্মক অফছেটেৰে drawer fascia ৰ উচ্চতা নিৰ্ধাৰণ কৰিলে দেখুওৱা partition ৰ উচ্চতা কেনেকৈ সম্পূৰ্ণ উচ্চতাৰ পৰা panel ৰ বেধ বিয়োগ কৰি পোৱা হয়, সেয়া চাওক।
- কেবিনেট পেনেলৰ নিজৰ স্তৰত ফিনিছ আৰু শেলফৰ বিকল্প নিৰ্ধাৰণ কৰককেবিনেট পেনেলৰ নিজৰ স্তৰ খুলি ইয়াৰ বাহ্যিক আৰু আভ্যন্তৰীণ ফিনিছ ক'ৰ পৰা আহে বাছনি কৰক, কেৱল সেই পেনেলৰ বাবে এটা কাষ্টম ফিনিছ বাছনি কৰক, আৰু শেলফৰ প্ৰকাৰ আৰু দৃশ্যমানতা নিৰ্ধাৰণ কৰক।
- কেবিনেট, পাৰ্টিশ্বন, শ্বাটাৰ আৰু পেনেলৰ নিয়ন্ত্ৰণত উপনীত হ'বলৈ ছিলেকশ্যন ট্ৰি ব্যৱহাৰ কৰকইয়াৰ ওপৰৰ স্তৰসমূহ দেখুৱাবলৈ আৰু পোনপটীয়াকৈ আপুনি প্ৰয়োজনীয় নিয়ন্ত্ৰণলৈ যাবলৈ কেবিনেটৰ এটা অংশ বাছনি কৰক।
- Create side-by-side drawers manually with a vertical partitionBuild side-by-side drawers by adding a shelf and a vertical partition, then placing a drawer on each side.
- স্কেলিটন ম’ডত কেবিনেটৰ ভিতৰৰ পাৰ্টিচনসমূহৰ মাপ দিয়কভিতৰৰ পাৰ্টিচনৰ মাপ যোগ কৰিবলৈ স্কেলিটন ম’ড অন কৰক, বা ইয়াৰ পৰিৱৰ্তে হাতেৰে পাৰ্টিচনসমূহৰ মাপ দিয়ক।
- পাৰ্টিচন উচ্চতা, গভীৰতা আৰু শেল্ফ ৰিভিল ব্যৱহাৰ কৰি এখন পাৰ্টিচন পেনেল স্থাপন কৰকএখন কাষ্টম পেনেল যোগ কৰি, ইয়াক ঘূৰাই আৰু ইয়াৰ বাওঁ-সোঁ মাত্ৰা আৰু X আৰু Y অৱস্থান নিৰ্ধাৰণ কৰি এখন অনুভূমিক পাৰ্টিচন পেনেল স্থাপন কৰক।
- কেবিনেট বা পাৰ্টিশ্যনত বাহ্যিক আৰু আভ্যন্তৰীণ সীমাৰ বাবে চাইজিং নিয়ম নিৰ্ধাৰণ কৰকএটা ইউনিটৰ সীমা ইয়াৰ বাহ্যিক জোখত প্ৰযোজ্য হ'ব নে ইয়াৰ আভ্যন্তৰীণ খালী ঠাইত প্ৰযোজ্য হ'ব, তাক বাছনি কৰক, আৰু এটা এটাকৈ ইউনিটত বা একেলগে প্ৰয়োগ কৰক।
- কেবিনেটৰ পিছফালৰ পেনেলক construction ৰ default partition ছেটিংছ ব্যৱহাৰ কৰি বিভক্ত কৰকএটা কেবিনেট বাছনি কৰক আৰু পিছফালৰ পেনেল বিভক্ত কৰিবলৈ বা এটা উলম্ব বিভাজক যোগ কৰিবলৈ ইয়াৰ construction ৰ default partition অপশ্যনসমূহ ব্যৱহাৰ কৰক।
- প্ৰতিটো উলম্ব পাৰ্টিশ্যনৰ বাবে Split top and bottom panelsকেবিনেটৰ ওপৰ আৰু তলৰ পেনেলক প্ৰতিটো উলম্ব খণ্ডৰ বাবে এটা টুকুৰাত বিভক্ত কৰক, যাতে প্ৰতিটো টুকুৰাই তাৰ খণ্ডৰ প্ৰস্থ অনুসৰণ কৰে আৰু কাষৰ টুকুৰাবোৰে স্বয়ংক্ৰিয়ভাৱে কাষবোৰৰ ওপৰলৈ বিস্তৃত হয়।
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
আৰু গাইড 2
সকলো দেখুৱাওক (2)
- এডজাষ্টেবল শ্বেলফবোৰ ফিক্সড শ্বেলফতকৈ কিয় বেলেগকৈ জোখা হয়এডজাষ্টেবল শ্বেলফবোৰ ফিক্সড শ্বেলফতকৈ অলপ সৰু কিয় কৰা হয় আৰু শ্বেলফ এটা ফিক্সড কৰি দিলে সেইটো কেনেকৈ সলনি হয়, সেয়া জানক।
- কনফিগাৰেচন এপ্লাই, ৰিমুভ বা ৰিপ্লেছ কৰিলে কি ক্লিয়াৰ হয় জানি লওকপাৰ্টিশ্যনৰ কোন অংশ কনফিগাৰেচন পৰিৱৰ্তনৰ পিছতো থাকে আৰু কোন অংশ ইয়াৰ সৈতে আঁতৰি যায়, জানি লওক।