隔断、搁板和内部结构
指南:104
- 添加并配置隔板、搁板、抽屉和柜门在隔板层级添加组件,使每组搁板、抽屉组或柜门系统仅应用于该单元的这一部分。
- 更改隔板尺寸,而不是平移层板通过调整隔板层级来调整柜体,在隔板层级添加门板系统,并避免平移层板,使层板仍与隔板布局匹配。
- Add shelves via partition and shutters via shutter systemAdd a shelf with the partition option and add shutters with the Add Shutter System option, then set the mechanism to single or double swing.
- 在隔板或板件层级调整层板内缩量在隔板层级更改层板内缩量,或在板件层级移动单个层板的前边缘,使内部层板避开冲突。
- 设置固定高度以控制隔板划分并添加抽屉用层板或竖向隔板划分柜体隔板,在某个分区上设置固定高度以确定其尺寸,然后添加挂衣杆或层板。
- 将外部柜门和抽屉的层板内缩量设为零将层板内缩量设为零,以免外部柜门和抽屉因内部层板间距而产生偏移。
- 将衣柜层板和铰链间隙设置为大于 5 mm选择足够大的层板间隙,使衣柜层板与铰链不相互碰撞,然后对照铰链位置进行检查。
- 在两侧添加竖向隔板和抽屉选择竖向隔板所在的一侧,然后在竖向隔板和层板就位后,在每一侧添加并配置抽屉。
- 在隔板空间中Add shelves并将搁板露边设为零将Add shelves添加到选定的隔板空间,并将搁板露边设为零,使前侧没有缝隙。
- Manage shelf reveal across partitions and wardrobesUnderstand how shelf reveal reaches nested partitions and how to apply it across several wardrobes at once.
- 拆分隔板并编辑子隔板在隔板层级添加隔板,以拆分父区域,并单独编辑每个子隔板。
- 在衣柜中分别处理各个隔断分别选中分隔式衣柜的每个隔断,这样您就可以只为一个区域添加柜门,或只更改该区域的层板而不影响其他区域。
- 在柜体区域内添加隔板和玻璃在柜体区域内的空白处添加隔板,将柜体内部等分。
- 通过面板部分的构造为搁板添加型材在所需的一侧,从面板部分的构造/顶部设置中添加型材,即可将型材放到搁板上。
- 点击Add shelves以添加搁板和挂衣空间点击隔板可在衣柜内添加搁板和挂衣空间,并在底部围绕抽屉进行规划。
- 对门板空间应用 20 或 25 的层板内缩在添加抽屉组之前,对门板空间应用 20 或 25 的层板内缩,以便层板和隔板就位。
- 自定义衣柜隔板、搁板和分区根据客户需求布置隔板、搁板和分区,包括长挂衣空间或抽屉配置。
- 将隔板设为固定高度以更改其高度将某块隔板切换为固定高度并输入所需高度,即可将其调高或调低。
- 在衣柜偏好设置中设置搁板和竖隔板封边的可见性在 Cabinet Preference / Wardrobe Preference 中,将固定搁板、活动搁板和竖隔板的前面/柜体可见封边设置为柜体不可见。
- 将层板露边和前方间隙设为零,使层板齐平在左侧面板的层板/板件构造设置中编辑层板露边和前方间隙,使层板齐平。
- Set shelf reveal on partitions and configurationsSet the partition's shelf reveal, keep the design's reveal or let a configuration take the parent's value.
- 将层板设为固定或可调,并设置竖隔板尺寸Choose fixed or adjustable shelves and set partition widths and ratios on the partition itself.
- 了解隔板,并在柜体内添加层板、板件或抽屉了解 Infurnia 中隔板的含义,并在隔板层级添加层板、竖向板件或抽屉。
- 为什么搁板或隔板无法删除了解搁板或隔板面板为何可能被保护而无法删除,以及如何绕过此限制。
- Align a shelf between a shutter and a drawerLearn where a shelf sits by default between a shutter and a drawer and how to shift its alignment by adjusting the extension.
- 将层板从活动层板改为固定层板在分隔板层级添加的层板默认为活动层板,您可以在板件层级更改其类型,将其设为固定层板。
- 选择预定义隔板配置请选择填充侧符合要求的现成布局,而不是逐个放置单元。
- 等分或按精确尺寸划分层板和垂直空间Add shelves和垂直分隔默认等分空间;也可选择一个空间并输入精确尺寸,将其不等分。
- 默认层板内缩距离的工作方式了解层板内缩距离的默认设置,以及为什么在创建目录条目时要记录该值。
- Lock a partition section and set its exact heightSwitch a partition section to fixed, give it dimensions and set an exact partition height.
- 将内部搁板设为固定,并设置柜门材料将柜体的内部搁板设为固定板,并从前方缩减 20 mm。
- 使用 Front shift 将隔断和图案从墙面向前偏移设置从墙面向前偏移的距离,使隔断、椽条和绘制的图案位于您想要的距离处。
- 在结构中添加搁板前先移除竖向隔板要在当前有竖向隔板的位置放置搁板,请先移除隔板,添加搁板,然后返回竖向隔板步骤。
- 将L形转角隔板拆分为Front Major或Side Major拆分L形转角隔板,为每个分区添加层板,并对齐板件尺寸。
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- 分区段如何自动调整尺寸并被锁定了解自动分区段和固定分区段如何分配空间,以及为什么总有一个分区段保持自动调整。
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- 将已保存的隔板配置加载到隔板上在隔板上打开 'Partition Configuration' 下拉菜单并应用已保存的配置,同时检查其是否适合该分区。
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- 搁板标注默认在骨架视图中显示搁板标注默认在骨架视图中标记可调搁板、固定搁板和玻璃搁板,您可以在左侧属性面板中关闭它们。
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- 通过隔板层级和抽屉组为柜体添加抽屉从柜体的隔板层级在柜体内部插入抽屉,然后设置其高度,如有需要可在下方添加层板。
- 为整个柜体或单个隔板添加门板系统为整个开放柜体或仅为一个隔板添加门板系统。
- Create external wardrobe drawers by removing shutters and adding a shelf zoneRemove the existing shutters and add a shelf zone so you can create external drawers in a wardrobe.
- 使用隔板、层板和抽屉系统构建衣柜内部在衣柜的隔板内添加Add shelves、抽屉系统和结构选项,以构建其内部。
- 为隔板添加柜门为隔板单独设置柜门,并选择单开门、双开门或上翻门。
- 通过Add Shutter System为单个隔板添加柜门通过选择柜体的某一个隔板,并在其选项中选择Add Shutter System,即可仅在该隔板上放置柜门。
- 通过选择Add drawers,而不是通过撤销通过选择每个抽屉应所在的隔板并输入数量,为单元添加一个或多个抽屉。
- 将柜门与板件和隔板对齐调整各边的缩减量,使柜门齐平、保持全高,或让隔板露出一部分。
- 用竖向隔板分隔柜体空间使用Add vertical partitions划分空间,并按比例或明确数值设置其宽度。
- 通过抽屉系统控件在隔板中添加或移除抽屉在隔板部分将Add drawers添加到隔板,并从抽屉系统中移除它们,同时还可添加搁板或竖向隔板。
- 在建造前规划抽屉、柜门和隔板在自定义内部结构之前,设置层板内缩、隔板高度以及柜门或抽屉区域。
- 通过将抽屉附加到空间隔板中的层板上来添加抽屉要在一个隔间内放置抽屉,请先在所需高度添加层板,然后将抽屉附加到空间隔板中的该层板上。
- 从隔板的快捷菜单中添加抽屉组为隔板添加外抽或内抽,并正确地将左侧和右侧抽屉组并排放置。
- 添加带竖向隔板的并排抽屉在抽屉之间放置一块竖向隔板,并将其尺寸设为抽屉高度,即可创建并排抽屉。
- 为隔板应用推拉和标准门板机构在正确的隔板上添加门板系统,并选择该隔板允许的机构。
- 在添加柜门前,先将衣柜划分为主隔板先按主隔板将衣柜划分,再细分出层板和竖板,之后再添加柜门系统并自定义其机构。
- 恢复隔板上已移除的门板系统为已移除门板的隔板重新添加平开门板系统,或用 None 再次移除。
- 在立面偏好设置中切换百叶方向、单元标注和搁板标注在立面偏好设置中开启或关闭百叶方向、单元标注和搁板标注,以控制显示哪些立面标注。
- 从违规列表中自动解决铰链和层板冲突当违规检查报告冲突(例如铰链与固定层板位于同一位置)时,请使用自动解决选项。
- 为铰链与层板的碰撞检测配置铰链尺寸请为每种铰链类型单独配置尺寸,以便检测铰链与层板的碰撞。
- 通过用负偏移调整隔板尺寸来设置抽屉面板高度了解当您用负偏移设置抽屉面板高度时,显示的隔板高度为何是总高度减去板材厚度。
- 在柜体板件自身的层级上设置饰面和层板选项打开柜体板件自身的层级,选择其外饰面和内饰面的来源,为该板件单独选择自定义饰面,并设置层板的类型和可见性。
- Use the selection tree to reach cabinet, partition, shutter and panel controlsSelect a cabinet part to expose the levels above it and jump straight to the controls you need.
- 使用竖向隔板手动创建并排抽屉通过添加层板和竖向隔板来构建并排抽屉,然后在每侧各放置一个抽屉。
- 使用骨架模式标注柜体内部隔板的尺寸开启骨架模式可添加内部隔板尺寸标注,也可以改为手动标注隔板尺寸。
- 使用隔板高度、深度和层板内缩来定位隔板通过添加自定义板件、旋转它,并设置其左右尺寸以及 X 和 Y 位置,来放置水平隔板。
- 为柜体或隔板设置外部与内部限值的尺寸规则选择单元的限值适用于其外部尺寸还是内部净空,并逐个单元或批量应用这些限值。
- 使用构造默认隔板设置拆分柜体背板选择一个柜体,使用其构造默认隔板选项拆分背板或添加竖向隔板。
- Split top and bottom panels 按垂直隔板拆分将柜体的顶板和底板按每个垂直分区拆分为一块,使每块随其分区宽度变化,且边缘件自动延伸至侧板之上。
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.