പാർട്ടീഷനുകൾ, ഷെൽഫുകൾ, ഇന്റേണലുകൾ
ഗൈഡുകൾ: 104
- പാർട്ടിഷനുകൾ, ഷെൽഫുകൾ, ഡ്രോയറുകൾ, ഷട്ടറുകൾ എന്നിവ ചേർത്ത് ക്രമീകരിക്കുകഓരോ ഷെൽഫും ഡ്രോയർ സെറ്റും ഷട്ടർ സിസ്റ്റവും യൂണിറ്റിന്റെ ആ ഭാഗത്തിന് മാത്രം ബാധകമാകുന്ന വിധത്തിൽ പാർട്ടിഷൻ തലത്തിൽ ഘടകങ്ങൾ ചേർക്കുക.
- Change partition dimension instead of translating a shelfAdjust a cabinet by manipulating partition levels, add a shutter system at the partition level, and avoid translating a shelf so the shelf still matches the partition layout.
- Add shelves വഴി പാർട്ടീഷനും ഷട്ടർ സിസ്റ്റം വഴി ഷട്ടറുകളുംപാർട്ടീഷൻ ഓപ്ഷൻ ഉപയോഗിച്ച് ഒരു ഷെൽഫ് ചേർക്കുക, Add Shutter System ഓപ്ഷൻ ഉപയോഗിച്ച് ഷട്ടറുകൾ ചേർക്കുക, തുടർന്ന് മെക്കാനിസം സിംഗിൾ അല്ലെങ്കിൽ ഡബിൾ സ്വിംഗ് ആയി സെറ്റ് ചെയ്യുക.
- പാർട്ടീഷൻ അല്ലെങ്കിൽ പാനൽ തലത്തിൽ ഷെൽഫ് റിവീൽ ക്രമീകരിക്കുകആന്തരിക ഷെൽഫുകൾ കൂട്ടിയിടിക്കൽ ഒഴിവാക്കാൻ പാർട്ടീഷൻ തലത്തിൽ ഷെൽഫ് റിവീൽ മാറ്റുക, അല്ലെങ്കിൽ പാനൽ തലത്തിൽ ഒരു ഷെൽഫിന്റെ മുൻവശം നീക്കുക.
- വിഭജന വിഭാഗങ്ങളെ നിയന്ത്രിക്കാനും ഡ്രോയറുകൾ ചേർക്കാനും സ്ഥിര ഉയരം സജ്ജമാക്കുകഒരു ഷെൽഫ് അല്ലെങ്കിൽ ലംബ വിഭജനം ഉപയോഗിച്ച് കാബിനറ്റ് വിഭജനം വിഭജിക്കുക, ഒരു വിഭാഗത്തിൽ സ്ഥിര ഉയരം സജ്ജമാക്കി അതിന്റെ വലിപ്പം നിർണ്ണയിക്കുക, തുടർന്ന് ഒരു ഹാംഗിംഗ് റോഡ് അല്ലെങ്കിൽ ഷെൽഫ് ചേർക്കുക.
- പുറം ഷട്ടറുകൾക്കും ഡ്രോയറുകൾക്കും ഷെൽഫ് റിവീൽ പൂജ്യമായി സജ്ജമാക്കുകആന്തരിക ഷെൽഫ് ഇടവേള കാരണം പുറം ഷട്ടറുകൾക്കും ഡ്രോയറുകൾക്കും ഓഫ്സെറ്റ് ഉണ്ടാകാതിരിക്കാൻ ഷെൽഫ് റിവീൽ പൂജ്യമായി സജ്ജമാക്കുക.
- Set wardrobe shelf and hinge reveals larger than 5 mmChoose a shelf reveal large enough that wardrobe shelves and hinges do not collide, then check it against the hinge positions.
- ഇരുവശത്തും ഒരു ലംബ വിഭജനവും ഡ്രോയറുകളും ചേർക്കുകലംബ വിഭജനം ഏത് വശത്ത് വേണമെന്ന് തിരഞ്ഞെടുക്കുക, തുടർന്ന് ലംബവും ഷെൽഫുകളും സ്ഥാപിച്ചതിന് ശേഷം ഓരോ വശത്തും ഡ്രോയറുകൾ ചേർത്ത് ക്രമീകരിക്കുക.
- പാർട്ടിഷനിൽ Add shelves ചെയ്ത് ഷെൽഫ് റിവീൽ പൂജ്യമായി സെറ്റ് ചെയ്യുകതിരഞ്ഞെടുത്ത പാർട്ടിഷൻ സ്പേസിലേക്ക് Add shelves ചെയ്ത്, മുൻവശത്ത് വിടവ് ഉണ്ടാകാതിരിക്കാൻ ഷെൽഫ് റിവീൽ പൂജ്യമായി സെറ്റ് ചെയ്യുക.
- പാർട്ടിഷനുകളിലും വാർഡ്രോബുകളിലും ഷെൽഫ് റിവീൽ നിയന്ത്രിക്കുകഷെൽഫ് റിവീൽ നെസ്റ്റഡ് പാർട്ടിഷനുകളിലേക്ക് എങ്ങനെ എത്തുന്നു, ഒരേസമയം പല വാർഡ്രോബുകളിലും ഇത് എങ്ങനെ പ്രയോഗിക്കാം എന്ന് മനസ്സിലാക്കുക.
- ഒരു പാർട്ടീഷൻ വിഭജിച്ച് ഉപ-പാർട്ടീഷനുകൾ എഡിറ്റ് ചെയ്യുകമാതൃ മേഖല വിഭജിക്കാൻ പാർട്ടീഷൻ തലത്തിൽ ഒരു പാർട്ടീഷൻ ചേർക്കുക, ഓരോ ഉപ-പാർട്ടീഷനും പ്രത്യേകം എഡിറ്റ് ചെയ്യുക.
- ഒരു വാർഡ്രോബിൽ വേർതിരിഞ്ഞ പാർട്ടീഷനുകളുമായി പ്രവർത്തിക്കുകവിഭജിച്ച ഒരു വാർഡ്രോബിന്റെ ഓരോ പാർട്ടീഷനും പ്രത്യേകം തിരഞ്ഞെടുക്കുക, അങ്ങനെ ഒരു മേഖലയിൽ മാത്രം ഒരു ഷട്ടർ ചേർക്കാനോ മറ്റുള്ളവയെ ബാധിക്കാതെ അതിന്റെ ഷെൽഫുകൾ മാറ്റാനോ കഴിയും.
- കാബിനറ്റ് സോണിനുള്ളിൽ പാർട്ടീഷനുകളും ഗ്ലാസും ചേർക്കുകകാബിനറ്റ് സോണിനുള്ളിലെ ശൂന്യമായ സ്ഥലത്ത് ഒരു പാർട്ടീഷൻ ചേർത്ത് കാബിനറ്റിന്റെ ഉൾഭാഗം തുല്യമായി വിഭജിക്കുക.
- പാനൽ വിഭാഗ നിർമ്മാണം വഴി ഒരു ഷെൽഫിൽ പ്രൊഫൈലുകൾ ചേർക്കുകആവശ്യമായ വശത്ത് പാനൽ വിഭാഗത്തിന്റെ construction/top ക്രമീകരണങ്ങളിൽ നിന്ന് ചേർത്ത് ഒരു ഷെൽഫിൽ ഒരു പ്രൊഫൈൽ ഇടുക.
- Add shelves ക്ലിക്ക് ചെയ്ത് പാർട്ടിഷനുകളിൽ ഷെൽഫുകളും ഹാംഗിംഗ് സ്പേസും ചേർക്കാംഒരു വാർഡ്രോബിനുള്ളിൽ ഷെൽഫുകളും ഹാംഗിംഗ് സ്പേസും ചേർക്കാൻ ഒരു പാർട്ടിഷനിൽ ക്ലിക്ക് ചെയ്യുക, താഴെയുള്ള ഡ്രോയറുകൾക്ക് ചുറ്റും പ്ലാൻ ചെയ്യുക.
- ഷട്ടർ സ്പേസിൽ 20 അല്ലെങ്കിൽ 25 ഷെൽഫ് റിവീൽ പ്രയോഗിക്കുകഡ്രോയർ സെറ്റ് ചേർക്കുന്നതിന് മുമ്പ് ഷെൽഫുകളും പാർട്ടീഷനുകളും ക്രമീകരിക്കപ്പെടാൻ, ഷട്ടർ സ്പേസിൽ 20 അല്ലെങ്കിൽ 25 ഷെൽഫ് റിവീൽ പ്രയോഗിക്കുക.
- വാർഡ്രോബ് പാർട്ടീഷനുകളും ഷെൽഫുകളും സോണുകളും ഇഷ്ടാനുസൃതമാക്കുകനീളമുള്ള തൂക്കിസ്ഥലം അല്ലെങ്കിൽ ഡ്രോയർ ക്രമീകരണം ഉൾപ്പെടെ, ഉപഭോക്താവിന്റെ ആവശ്യത്തിന് അനുസരിച്ച് പാർട്ടീഷനുകളും ഷെൽഫുകളും സോണുകളും ക്രമീകരിക്കുക.
- ഒരു പാർട്ടീഷന്റെ ഉയരം മാറ്റാൻ അത് സ്ഥിര ഉയരത്തിലേക്ക് സജ്ജമാക്കുകഒരു പാർട്ടീഷൻ സ്ഥിര ഉയരത്തിലേക്ക് മാറ്റി ആവശ്യമായ ഉയരം നൽകി അത് ഉയരത്തിലാക്കുകയോ താഴ്ത്തുകയോ ചെയ്യാം.
- വാർഡ്രോബ് മുൻഗണനകളിൽ ഷെൽഫിന്റെയും പാർട്ടീഷന്റെയും അരിക് ദൃശ്യത സജ്ജമാക്കുകCabinet Preference / Wardrobe Preference-ൽ ഫിക്സഡ് ഷെൽഫുകൾ, അഡ്ജസ്റ്റബിൾ ഷെൽഫുകൾ, ലംബ പാർട്ടീഷൻ പാനലുകൾ എന്നിവയ്ക്ക് ഫ്രണ്ട്/കാർക്കാസ് ദൃശ്യ എഡ്ജ് ബാൻഡ് കാർക്കാസ് അദൃശ്യം എന്നാക്കി സജ്ജമാക്കുക.
- ഷെൽഫുകൾ ഫ്ലഷ് ആക്കാൻ ഷെൽഫ് റിവീലും ഫ്രണ്ട് ഗ്യാപ്പും പൂജ്യമാക്കുകഷെൽഫുകൾ ഫ്ലഷ് ആക്കാൻ ഇടത് പാനലിലെ ഷെൽഫ്/പാനൽ നിർമ്മാണ ക്രമീകരണങ്ങളിൽ ഷെൽഫ് റിവീലും ഫ്രണ്ട് ഗ്യാപ്പും എഡിറ്റ് ചെയ്യുക.
- പാർട്ടിഷനുകളിലും കോൺഫിഗറേഷനുകളിലും ഷെൽഫ് റിവീൽ സെറ്റ് ചെയ്യുകപാർട്ടിഷന്റെ ഷെൽഫ് റിവീൽ സെറ്റ് ചെയ്യുക, ഡിസൈനിന്റെ റിവീൽ നിലനിർത്തുക, അല്ലെങ്കിൽ ഒരു കോൺഫിഗറേഷൻ പാരന്റിന്റെ മൂല്യം സ്വീകരിക്കട്ടെ.
- ഷെൽഫുകൾ ഫിക്സഡ് അല്ലെങ്കിൽ അഡ്ജസ്റ്റബിൾ ആയി സെറ്റ് ചെയ്ത് പാർട്ടീഷനുകളുടെ വലിപ്പം നിർണ്ണയിക്കുകഫിക്സഡ് അല്ലെങ്കിൽ അഡ്ജസ്റ്റബിൾ ഷെൽഫുകൾ തിരഞ്ഞെടുത്ത് പാർട്ടീഷനിൽ തന്നെ പാർട്ടീഷൻ വീതിയും അനുപാതങ്ങളും സെറ്റ് ചെയ്യുക.
- കേബിനറ്റിനുള്ളിലെ പാർട്ടീഷനുകൾ മനസ്സിലാക്കി ഷെൽഫുകളും പാനലുകളും ഡ്രോയറുകളും ചേർക്കുകInfurnia-യിൽ പാർട്ടീഷൻ എന്താണെന്ന് മനസ്സിലാക്കി, പാർട്ടീഷൻ തലത്തിൽ ഷെൽഫുകളും ലംബ പാനലുകളും ഡ്രോയറുകളും ചേർക്കുക.
- ഒരു ഷെൽഫോ പാർട്ടീഷനോ എന്തുകൊണ്ട് ഡിലീറ്റ് ചെയ്യാൻ കഴിയില്ലLearn why a shelf or partition panel may be protected from deletion and how to work around it.
- ഒരു ഷട്ടറിനും ഡ്രോയറിനും ഇടയിൽ ഒരു ഷെൽഫ് വിന്യസിക്കുകഒരു ഷട്ടറിനും ഡ്രോയറിനും ഇടയിൽ ഒരു ഷെൽഫ് സ്വതവേ എവിടെയാണ് ഇരിക്കുന്നതെന്നും എക്സ്റ്റൻഷൻ ക്രമീകരിച്ച് അതിന്റെ വിന്യാസം എങ്ങനെ മാറ്റാമെന്നും അറിയുക.
- ഒരു ഷെൽഫ് ക്രമീകരിക്കാവുന്നതിൽ നിന്ന് സ്ഥിരമാക്കി മാറ്റുകപാർട്ടിഷൻ ലെവലിൽ ചേർക്കുന്ന ഷെൽഫുകൾ ആദ്യം ക്രമീകരിക്കാവുന്നതാണ്; പാനൽ ലെവലിൽ അവയുടെ തരം മാറ്റി ഒരു ഷെൽഫ് സ്ഥിരമാക്കാം.
- മുൻകൂട്ടി നിർവചിച്ച ഒരു പാർട്ടീഷൻ ക്രമീകരണം തിരഞ്ഞെടുക്കുകവ്യക്തിഗത യൂണിറ്റുകൾ ഇടുന്നതിനുപകരം, ആവശ്യകതയുമായി പൊരുത്തപ്പെടുന്ന ഫില്ലർ വശമുള്ള ഒരു തയ്യാറായ ലേയൗട്ട് തിരഞ്ഞെടുക്കുക.
- ഷെൽഫും ലംബ ഇടങ്ങളും തുല്യമായോ കൃത്യമായ അളവനുസരിച്ചോ വിഭജിക്കുകAdd shelves ഉം ലംബങ്ങളും സ്വതവേ ഇടം തുല്യമായി വിഭജിക്കുന്നു; അല്ലെങ്കിൽ ഒരു ഇടം തിരഞ്ഞെടുത്ത് കൃത്യമായ അളവ് നൽകി അത് അസമമായി വിഭജിക്കാം.
- സ്ഥിരസ്ഥിതി ഷെൽഫ് റിവീൽ ദൂരം എങ്ങനെ പ്രവർത്തിക്കുന്നുഷെൽഫ് റിവീൽ ദൂരം സ്ഥിരസ്ഥിതിയായി എത്രയാണ് ക്രമീകരിച്ചിരിക്കുന്നതെന്നും കാറ്റലോഗ് എൻട്രികൾ സൃഷ്ടിക്കുമ്പോൾ അത് എന്തുകൊണ്ട് രേഖപ്പെടുത്തണമെന്നും അറിയുക.
- ഒരു പാർട്ടീഷൻ സെക്ഷൻ ലോക്ക് ചെയ്ത് അതിന്റെ കൃത്യമായ ഉയരം സെറ്റ് ചെയ്യുകഒരു പാർട്ടീഷൻ സെക്ഷൻ ഫിക്സഡ് ആക്കി മാറ്റി, അതിന് അളവുകൾ നൽകി, കൃത്യമായ പാർട്ടീഷൻ ഉയരം സെറ്റ് ചെയ്യുക.
- ഇൻസൈഡ് ഷെൽഫ് ഫിക്സഡ് ആക്കി ഷട്ടർ മെറ്റീരിയൽ സെറ്റ് ചെയ്യുകഒരു കാബിനറ്റിന്റെ ഇൻസൈഡ് ഷെൽഫ് ഫിക്സഡ് പാനലായി സെറ്റ് ചെയ്ത് മുൻവശത്തുനിന്ന് 20 mm കുറയ്ക്കുക.
- Front shift ഉപയോഗിച്ച് പാർട്ടീഷനുകളും പാറ്റേണുകളും ചുമരിൽ നിന്ന് മുന്നോട്ട് ഓഫ്സെറ്റ് ചെയ്യുകനിങ്ങൾക്ക് ആവശ്യമുള്ള ദൂരത്തിൽ പാർട്ടീഷനുകളും റാഫ്റ്ററുകളും വരച്ച പാറ്റേണുകളും വരുന്നതിന് ചുമരിൽ നിന്ന് ഒരു മുന്നോട്ടുള്ള ഓഫ്സെറ്റ് സജ്ജമാക്കുക.
- ഘടനയിൽ ഷെൽഫ് ചേർക്കുന്നതിന് മുമ്പ് ലംബ വിഭജനം നീക്കം ചെയ്യുകനിലവിൽ ലംബ വിഭജനം ഉള്ള സ്ഥലത്ത് ഷെൽഫ് സ്ഥാപിക്കാൻ, ആദ്യം വിഭജനം നീക്കം ചെയ്യുക, ഷെൽഫ് ചേർക്കുക, തുടർന്ന് ലംബ വിഭജന ഘട്ടത്തിലേക്ക് മടങ്ങുക.
- ഒരു L-കോർണർ പാർട്ടീഷൻ Front Major അല്ലെങ്കിൽ Side Major ആയി വിഭജിക്കുകL-കോർണർ പാർട്ടീഷൻ വിഭജിച്ച്, ഓരോ ഭാഗത്തും ഷെൽഫുകൾ ചേർത്ത്, പാനൽ അളവുകൾ യോജിപ്പിക്കുക.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- പാർട്ടിഷൻ വിഭാഗങ്ങൾ എങ്ങനെ ഓട്ടോ-സൈസ് ചെയ്യപ്പെടുന്നു, ലോക്ക് ചെയ്യപ്പെടുന്നു എന്നത്ഓട്ടോ, ഫിക്സഡ് പാർട്ടിഷൻ വിഭാഗങ്ങൾ ഇടം എങ്ങനെ പങ്കിടുന്നു, ഒരു വിഭാഗം എപ്പോഴും ഓട്ടോ-അഡ്ജസ്റ്റിംഗ് ആയി തുടരുന്നത് എന്തുകൊണ്ട് എന്നത് കാണുക.
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- Load a saved partition configuration onto a partitionOpen the 'Partition Configuration' dropdown on a partition and apply a saved configuration, checking it fits the section.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- സ്കെലിറ്റൺ വ്യൂവിൽ ഷെൽഫ് അനോട്ടേഷനുകൾ സ്വതവേ കാണിക്കുന്നുസ്കെലിറ്റൺ വ്യൂവിൽ ക്രമീകരിക്കാവുന്ന, സ്ഥിരവും ഗ്ലാസ് ഷെൽഫുകളും സ്വതവേ ഷെൽഫ് അനോട്ടേഷനുകൾ അടയാളപ്പെടുത്തുന്നു, കൂടാതെ LHS പ്രോപ്പർട്ടി പാനലിൽ നിന്ന് അവ ഓഫ് ചെയ്യാനും കഴിയും.
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- പാർട്ടിഷൻ ലെവലും ഡ്രോയർ സെറ്റും ഉപയോഗിച്ച് ഒരു കാബിനറ്റിൽ ഡ്രോയർ ചേർക്കുകഒരു കാബിനറ്റിന്റെ പാർട്ടിഷൻ ലെവലിൽ നിന്ന് അതിനുള്ളിൽ ഒരു ഡ്രോയർ ഇൻസേർട്ട് ചെയ്യുക, തുടർന്ന് അതിന്റെ ഉയരങ്ങൾ സെറ്റ് ചെയ്യുക, ആവശ്യമെങ്കിൽ താഴെ ഒരു ഷെൽഫ് ചേർക്കുക.
- മുഴുവൻ കാബിനറ്റിനും അല്ലെങ്കിൽ ഒരു പാർട്ടീഷനും ഷട്ടർ സിസ്റ്റം ചേർക്കുകതുറന്ന കാബിനറ്റിന് മൊത്തമായി അല്ലെങ്കിൽ ഒരു പാർട്ടീഷന് മാത്രമായി ഷട്ടർ സിസ്റ്റം ചേർക്കുക.
- ഷട്ടറുകൾ നീക്കി ഒരു ഷെൽഫ് സോൺ ചേർത്ത് വാർഡ്രോബിൽ ബാഹ്യ ഡ്രോയറുകൾ സൃഷ്ടിക്കുകവാർഡ്രോബിൽ ബാഹ്യ ഡ്രോയറുകൾ സൃഷ്ടിക്കാൻ, നിലവിലുള്ള ഷട്ടറുകൾ നീക്കി ഒരു ഷെൽഫ് സോൺ ചേർക്കുക.
- പാർട്ടിഷനുകൾ, ഷെൽഫുകൾ, ഡ്രോയർ സിസ്റ്റങ്ങൾ എന്നിവ ഉപയോഗിച്ച് വാർഡ്രോബിന്റെ ഉൾഭാഗം നിർമ്മിക്കുകഒരു വാർഡ്രോബിന്റെ പാർട്ടിഷനുകൾക്കുള്ളിൽ Add shelves, ഡ്രോയർ സിസ്റ്റങ്ങൾ, കൺസ്ട്രക്ഷൻ ഓപ്ഷനുകൾ എന്നിവ ഉപയോഗിച്ച് അതിന്റെ ഉൾഭാഗം നിർമ്മിക്കുക.
- ഒരു പാർട്ടീഷനിൽ ഒരു ഷട്ടർ ചേർക്കുകഒരു പാർട്ടീഷന് സ്വന്തം ഷട്ടർ നൽകുക, ഒറ്റ ഷട്ടർ, ഇരട്ട സ്വിംഗ് അല്ലെങ്കിൽ ലിഫ്റ്റ്-അപ്പ് എന്നിവയിൽ നിന്ന് തിരഞ്ഞെടുക്കുക.
- Add Shutter System വഴി ഒരു പാർട്ടീഷനിൽ മാത്രം ഒരു ഷട്ടർ ചേർക്കുകഒരു കാബിനറ്റിന്റെ ഒരു പാർട്ടീഷനിൽ മാത്രം ഷട്ടർ സ്ഥാപിക്കാൻ, ആ പാർട്ടീഷൻ തിരഞ്ഞെടുത്ത് അതിന്റെ ഓപ്ഷനുകളിൽ നിന്ന് Add Shutter System തിരഞ്ഞെടുക്കുക.
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- ഷട്ടറുകൾ പാനലുകളുമായും പാർട്ടീഷനുകളുമായും വിന്യസിക്കുകഷട്ടറുകൾ ഫ്ലഷ് ആയി ഇരിക്കാനും പൂർണ്ണ ഉയരത്തിൽ നിൽക്കാനും അല്ലെങ്കിൽ ഒരു പാർട്ടീഷൻ മറയ്ക്കാതെ വിടാനും ഓരോ അറ്റത്തിന്റെയും കുറവുകൾ ക്രമീകരിക്കുക.
- കുത്തനെയുള്ള വിഭജനങ്ങൾ ഉപയോഗിച്ച് കാബിനറ്റ് സ്ഥലങ്ങൾ വിഭജിക്കുകഒരു സ്ഥലം വിഭജിക്കാനും അവയുടെ വീതികൾ അനുപാതമോ വ്യക്തമായ മൂല്യങ്ങളോ ഉപയോഗിച്ച് സജ്ജീകരിക്കാനും Add vertical partitions.
- ഡ്രോയർ സിസ്റ്റം നിയന്ത്രണങ്ങൾ വഴി ഒരു പാർട്ടീഷനിൽ നിന്ന് ഡ്രോയറുകൾ ചേർക്കുകയോ നീക്കം ചെയ്യുകയോ ചെയ്യുകAdd drawers to a partition from the partition section and remove them from the drawer system, while also adding shelves or vertical partitions.
- നിർമ്മാണത്തിന് മുൻപ് ഡ്രോയറുകൾ, ഷട്ടറുകൾ, പാർട്ടീഷനുകൾ എന്നിവ പ്ലാൻ ചെയ്യുകഇന്റേണലുകൾ കസ്റ്റമൈസ് ചെയ്യുന്നതിന് മുൻപ് ഷെൽഫ് റിവീൽ, പാർട്ടീഷൻ ഉയരങ്ങൾ, ഷട്ടർ അല്ലെങ്കിൽ ഡ്രോയർ സോണുകൾ എന്നിവ സെറ്റ് ചെയ്യുക.
- Add a drawer by attaching it to a shelf in the space partitionPlace a drawer inside a compartment by first adding a shelf at the required height and then attaching the drawer to that shelf in the space partition.
- പാർട്ടീഷന്റെ ക്വിക്ക് ആക്സസ് മെനുവിൽ നിന്ന് ഒരു ഡ്രോയർ സെറ്റ് ചേർക്കുകഒരു പാർട്ടീഷനിൽ എക്സ്റ്റേണൽ അല്ലെങ്കിൽ ഇന്റേണൽ ഡ്രോയറുകൾ ചേർത്ത് LHS, RHS ഡ്രോയർ സെറ്റുകൾ ശരിയായി വശത്തുവശം സ്ഥാപിക്കുക.
- ഒരു ലംബ പാർട്ടീഷൻ ഉപയോഗിച്ച് അടുത്തടുത്തുള്ള ഡ്രോയറുകൾ ചേർക്കുകഅവയ്ക്കിടയിൽ ഒരു ലംബ പാർട്ടീഷൻ വെച്ച്, അതിനെ ഡ്രോയർ ഉയരത്തിന് അനുസൃതമാക്കി അടുത്തടുത്തുള്ള ഡ്രോയറുകൾ സൃഷ്ടിക്കുക.
- വിഭജനങ്ങളിൽ സ്ലൈഡിംഗ്, സ്റ്റാൻഡേർഡ് ഷട്ടർ മെക്കാനിസങ്ങൾ പ്രയോഗിക്കുകശരിയായ വിഭജനത്തിൽ ഒരു ഷട്ടർ സിസ്റ്റം ചേർത്ത്, ആ വിഭജനം അനുവദിക്കുന്ന ഒരു മെക്കാനിസം തിരഞ്ഞെടുക്കുക.
- ഷട്ടറുകൾ ചേർക്കുന്നതിന് മുമ്പ് വാർഡ്രോബ് പ്രധാന പാർട്ടീഷനുകളായി വിഭജിക്കുകആദ്യം വാർഡ്രോബ് പ്രധാന പാർട്ടീഷനുകളായി വിഭജിക്കുക, തുടർന്ന് ഷെൽഫുകൾക്കും ലംബങ്ങൾക്കുമായി അവയെ ഉപവിഭജിക്കുക, പിന്നീട് ഇഷ്ടാനുസൃത മെക്കാനിസങ്ങളോടെ ഷട്ടർ സിസ്റ്റങ്ങൾ ചേർക്കുക.
- ഒരു പാർട്ടീഷനിൽ നീക്കം ചെയ്ത ഷട്ടർ സിസ്റ്റം പുനഃസ്ഥാപിക്കുകഷട്ടറുകൾ നീക്കം ചെയ്ത ഒരു പാർട്ടീഷനിലേക്ക് സ്വിംഗ് ഷട്ടർ സിസ്റ്റം വീണ്ടും ചേർക്കുക, അല്ലെങ്കിൽ None ഉപയോഗിച്ച് അവ വീണ്ടും നീക്കം ചെയ്യുക.
- എലിവേഷൻ മുൻഗണനകളിൽ ഷട്ടർ ദിശ, യൂണിറ്റ്, ഷെൽഫ് അനോട്ടേഷനുകൾ ടോഗിൾ ചെയ്യുകഎലിവേഷൻ മുൻഗണനകളിൽ ഷട്ടർ ദിശകൾ, യൂണിറ്റ് അനോട്ടേഷനുകൾ, ഷെൽഫ് അനോട്ടേഷനുകൾ ഓൺ അല്ലെങ്കിൽ ഓഫ് ചെയ്ത് ഏത് എലിവേഷൻ അനോട്ടേഷനുകൾ ദൃശ്യമാകണം എന്ന് നിയന്ത്രിക്കുക.
- ലംഘനങ്ങളുടെ പട്ടികയിൽ നിന്ന് ഹിഞ്ച്, ഷെൽഫ് കൂട്ടിയിടികൾ ഓട്ടോ-സോൾവ് ചെയ്യുകഒരു ഫിക്സഡ് ഷെൽഫിന്റെ അതേ സ്ഥാനത്ത് ഒരു ഹിഞ്ച് പോലുള്ള ഒരു കൂട്ടിയിടി ലംഘന പരിശോധന റിപ്പോർട്ട് ചെയ്യുമ്പോൾ ഓട്ടോ-സോൾവ് ഓപ്ഷൻ ഉപയോഗിക്കുക.
- ഹിഞ്ച്-ഷെൽഫ് കൂട്ടിയിടി കണ്ടെത്തലിനായി ഹിഞ്ച് അളവുകൾ ക്രമീകരിക്കുകഹിഞ്ച്-ഷെൽഫ് കൂട്ടിയിടികൾ കണ്ടെത്താൻ ഓരോ ഹിഞ്ച് തരത്തിനും വെവ്വേറെ അളവുകൾ ക്രമീകരിക്കുക.
- നെഗറ്റീവ് ഓഫ്സെറ്റ് ഉപയോഗിച്ച് പാർട്ടീഷൻ അളവ് ക്രമീകരിച്ച് ഡ്രോയർ ഫാസിയയുടെ ഉയരം സെറ്റ് ചെയ്യുകനെഗറ്റീവ് ഓഫ്സെറ്റ് ഉപയോഗിച്ച് ഡ്രോയർ ഫാസിയയുടെ ഉയരം സെറ്റ് ചെയ്യുമ്പോൾ കാണിക്കുന്ന പാർട്ടീഷൻ ഉയരം മുഴുവൻ ഉയരത്തിൽ നിന്ന് പാനൽ കനം കുറച്ചതാണെന്ന് കാണുക.
- ഒരു കാബിനറ്റ് പാനലിന്റെ സ്വന്തം ലെവലിൽ ഫിനിഷുകളും ഷെൽഫ് ഓപ്ഷനുകളും സെറ്റ് ചെയ്യുകഒരു കാബിനറ്റ് പാനലിന്റെ സ്വന്തം ലെവൽ തുറന്ന് അതിന്റെ ബാഹ്യവും ആന്തരികവുമായ ഫിനിഷുകൾ എവിടെ നിന്ന് വരുന്നു എന്ന് തിരഞ്ഞെടുക്കുക, ആ പാനലിന് മാത്രമായി ഒരു കസ്റ്റം ഫിനിഷ് തിരഞ്ഞെടുക്കുക, ഒരു ഷെൽഫിന്റെ തരവും ദൃശ്യതയും സെറ്റ് ചെയ്യുക.
- കാബിനറ്റ്, പാർട്ടീഷൻ, ഷട്ടർ, പാനൽ നിയന്ത്രണങ്ങളിൽ എത്താൻ സെലക്ഷൻ ട്രീ ഉപയോഗിക്കുകഅതിന് മുകളിലുള്ള ലെവലുകൾ കാണിക്കാനും ആവശ്യമായ നിയന്ത്രണങ്ങളിലേക്ക് നേരിട്ട് പോകാനും ഒരു കാബിനറ്റ് ഭാഗം തിരഞ്ഞെടുക്കുക.
- Create side-by-side drawers manually with a vertical partitionBuild side-by-side drawers by adding a shelf and a vertical partition, then placing a drawer on each side.
- സ്കെലിറ്റൺ മോഡിൽ കാബിനറ്റിനുള്ളിലെ പാർട്ടീഷനുകളുടെ അളവുകൾ രേഖപ്പെടുത്തുകആന്തരിക പാർട്ടീഷൻ അളവുകൾ ചേർക്കാൻ സ്കെലിറ്റൺ മോഡ് ഓൺ ചെയ്യുക, അല്ലെങ്കിൽ പാർട്ടീഷനുകളുടെ അളവുകൾ കൈകൊണ്ട് രേഖപ്പെടുത്തുക.
- പാർട്ടിഷൻ ഉയരം, ആഴം, ഷെൽഫ് റിവീൽ എന്നിവ ഉപയോഗിച്ച് ഒരു പാർട്ടിഷൻ പാനൽ സ്ഥാപിക്കുകഒരു കസ്റ്റം പാനൽ ചേർത്ത്, അത് തിരിച്ച്, അതിന്റെ ഇടത്-വലത് അളവും X, Y സ്ഥാനങ്ങളും സജ്ജീകരിച്ച് ഒരു തിരശ്ചീന പാർട്ടിഷൻ പാനൽ സ്ഥാപിക്കുക.
- ക്യാബിനറ്റിലോ പാർട്ടീഷനിലോ പുറം, ആന്തരിക പരിധികൾക്കായി സൈസിംഗ് നിയമങ്ങൾ സജ്ജമാക്കുകഒരു യൂണിറ്റിന്റെ പരിധികൾ അതിന്റെ പുറം അളവുകൾക്കാണോ ആന്തരിക ഒഴിവിടത്തിനാണോ ബാധകമാകേണ്ടതെന്ന് തിരഞ്ഞെടുക്കുക, ഒരു സമയം ഒരു യൂണിറ്റിനോ ഒന്നിച്ച് പലതിനോ അവ പ്രയോഗിക്കുക.
- കൺസ്ട്രക്ഷൻ ഡിഫോൾട്ട് പാർട്ടീഷൻ ക്രമീകരണങ്ങൾ ഉപയോഗിച്ച് ഒരു കാബിനറ്റിന്റെ പിൻ പാനൽ വിഭജിക്കുകഒരു കാബിനറ്റ് തിരഞ്ഞെടുത്ത്, അതിന്റെ കൺസ്ട്രക്ഷൻ ഡിഫോൾട്ട് പാർട്ടീഷൻ ഓപ്ഷനുകൾ ഉപയോഗിച്ച് പിൻ പാനൽ വിഭജിക്കുകയോ ലംബ വിഭജനം ചേർക്കുകയോ ചെയ്യുക.
- ഓരോ ലംബ പാർട്ടിഷനും Split top and bottom panelsഓരോ ലംബ വിഭാഗത്തിനും ഒരു കഷണം വീതം ആകത്തക്കവിധം കാബിനറ്റിന്റെ മുകൾ, താഴെ പാനലുകൾ വിഭജിക്കുക, അങ്ങനെ ഓരോ കഷണവും അതിന്റെ വിഭാഗത്തിന്റെ വീതി പിന്തുടരുകയും അറ്റത്തെ കഷണങ്ങൾ വശങ്ങളിലേക്ക് സ്വയമേവ നീളുകയും ചെയ്യും.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
കൂടുതൽ ഗൈഡുകൾ 2
എല്ലാം കാണിക്കുക (2)
- അഡ്ജസ്റ്റബിൾ ഷെൽഫുകൾ ഫിക്സഡ് ഷെൽഫുകളിൽ നിന്ന് വലിപ്പത്തിൽ എങ്ങനെ വ്യത്യസ്തമാണ്അഡ്ജസ്റ്റബിൾ ഷെൽഫുകൾ ഫിക്സഡ് ഷെൽഫുകളേക്കാൾ അൽപം ഇടുങ്ങിയതായി നിർമ്മിക്കുന്നത് എന്തുകൊണ്ടെന്നും, ഒരു ഷെൽഫ് ഫിക്സഡ് ആക്കുമ്പോൾ അത് എങ്ങനെ മാറുന്നുവെന്നും അറിയുക.
- ഒരു കോൺഫിഗറേഷൻ പ്രയോഗിക്കുമ്പോഴും നീക്കുമ്പോഴും മാറ്റിസ്ഥാപിക്കുമ്പോഴും എന്താണ് മായ്ക്കപ്പെടുന്നതെന്ന് അറിയുകLearn which parts of a partition survive a configuration change and which are removed with it.