पार्टिशन, शेल्फ आणि अंतर्गत भाग
मार्गदर्शक: 104
- विभाजने, शेल्फ्स, ड्रॉव्हर आणि शटर जोडा आणि कॉन्फिगर कराघटक विभाजन स्तरावर जोडा, जेणेकरून प्रत्येक शेल्फ, ड्रॉव्हर संच किंवा शटर सिस्टम केवळ युनिटच्या त्या भागालाच लागू होईल.
- शेल्फचे भाषांतर न करता विभाजनाचे मापन बदलाविभाजनाची पातळी बदलून कॅबिनेट समायोजित करा, विभाजनाच्या पातळीवर शटर सिस्टम जोडा आणि शेल्फचे भाषांतर टाळा जेणेकरून शेल्फ विभाजनाच्या मांडणीशी जुळत राहील.
- Add shelves द्वारे विभाजन आणि शटर सिस्टमद्वारे शटरविभाजन पर्यायाने शेल्फ जोडा आणि Add Shutter System पर्यायाने शटर जोडा, नंतर यंत्रणा सिंगल किंवा डबल स्विंगवर सेट करा.
- विभाजक किंवा पॅनेल स्तरावर शेल्फ रिव्हील समायोजित कराविभाजक स्तरावर शेल्फ रिव्हील बदला किंवा पॅनेल स्तरावर एका शेल्फची पुढील कडा हलवा, जेणेकरून आतील शेल्फ्सचा टक्कर दूर होईल.
- विभाजन नियंत्रित करण्यासाठी स्थिर उंची सेट करा आणि ड्रॉवर जोडाशेल्फ किंवा उभ्या विभाजनाने कॅबिनेटचे विभाजन करा, विभागाचा आकार ठरवण्यासाठी त्यावर स्थिर उंची सेट करा, नंतर हँगिंग रॉड किंवा शेल्फ जोडा.
- बाह्य शटर आणि ड्रॉवरसाठी शेल्फ रिव्हील शून्यावर सेट कराशेल्फ रिव्हील शून्यावर सेट करा, जेणेकरून आतील शेल्फच्या अंतरामुळे बाह्य शटर आणि ड्रॉवर ऑफसेट होणार नाहीत.
- वॉर्डरोबच्या शेल्फ आणि हिंज रिव्हील 5 मिमीपेक्षा मोठे सेट करावॉर्डरोबचे शेल्फ आणि हिंज एकमेकांना धडकणार नाहीत इतके मोठे शेल्फ रिव्हील निवडा, नंतर ते हिंजच्या जागांशी तपासा.
- दोन्ही बाजूंना उभा विभाजक आणि ड्रॉवर जोडाउभा विभाजक कोणत्या बाजूला जाईल ते निवडा, नंतर उभा विभाजक आणि शेल्फ्स जागेवर आल्यावर प्रत्येक बाजूला ड्रॉवर जोडा आणि त्यांची रचना करा.
- Add shelves मध्ये विभाजन आणि शेल्फ रिव्हील शून्यावर सेट करानिवडलेल्या विभाजन जागेत Add shelves करा आणि समोरच्या बाजूने कोणतेही अंतर न राहावे म्हणून शेल्फ रिव्हील शून्यावर सेट करा.
- विभाजने आणि वॉर्डरोब्समध्ये शेल्फ रिव्हील व्यवस्थापित कराशेल्फ रिव्हील नेस्टेड विभाजनांपर्यंत कसे पोहोचते आणि एकाच वेळी अनेक वॉर्डरोब्सवर ते कसे लागू करायचे ते समजून घ्या.
- विभाजनाचे दोन भाग करा आणि उपविभाजने संपादित करापालक क्षेत्राचे दोन भाग करण्यासाठी विभाजन स्तरावर विभाजन जोडा आणि प्रत्येक उपविभाजन स्वतंत्रपणे संपादित करा.
- वॉर्डरोबमधील वेगळ्या विभाजनांसह काम कराविभाजित वॉर्डरोबमधील प्रत्येक विभाजन स्वतंत्रपणे निवडा, जेणेकरून तुम्ही फक्त एका विभागात शटर जोडू शकता किंवा इतरांना स्पर्श न करता त्याच्या शेल्फ बदलू शकता.
- कॅबिनेट झोनमध्ये विभाजक आणि काच जोडाकॅबिनेट झोनमधील रिकाम्या जागेत विभाजक जोडून कॅबिनेटचा आतील भाग समान भागांत विभागा.
- पॅनेल विभागाच्या construction द्वारे शेल्फवर प्रोफाइल जोडाआवश्यक बाजूस पॅनेल विभागाच्या construction/top सेटिंग्जमधून प्रोफाइल जोडून ते शेल्फवर ठेवा.
- Add shelves and hanging space by clicking on partitionsClick a partition to add shelves and hanging space inside a wardrobe, and plan around drawers at the bottom.
- शटरच्या जागेवर 20 किंवा 25 चा शेल्फ रिव्हील लागू कराड्रॉवर सेट जोडण्यापूर्वी शेल्फ आणि पार्टिशन सेट होण्यासाठी शटरच्या जागेवर 20 किंवा 25 चा शेल्फ रिव्हील लागू करा.
- वॉर्डरोबमधील विभाजक, शेल्फ आणि विभाग सानुकूलित कराग्राहकाच्या गरजेनुसार विभाजक, शेल्फ आणि विभाग व्यवस्थित करा, ज्यात लांब हँगिंगसाठी जागा किंवा ड्रॉवरची रचना यांचा समावेश आहे.
- भागाची उंची बदलण्यासाठी तो स्थिर उंचीवर सेट कराएखादा भाग स्थिर उंचीवर बदलून आणि आवश्यक उंची टाकून तो उंच किंवा लहान करा.
- वॉर्डरोब प्राधान्यांमध्ये शेल्फ आणि विभाजक पॅनेलच्या कडेची दृश्यमानता सेट कराCabinet Preference / Wardrobe Preference मध्ये स्थिर शेल्फ, समायोज्य शेल्फ आणि उभ्या विभाजक पॅनेलसाठी front/carcass visible edge band हे carcass invisible वर सेट करा.
- फ्लश शेल्फसाठी शेल्फ रिव्हील आणि फ्रंट गॅप शून्यावर सेट कराशेल्फ्स फ्लश होण्यासाठी डाव्या बाजूच्या पॅनेलवरील शेल्फ/पॅनेल कन्स्ट्रक्शन सेटिंग्जमध्ये शेल्फ रिव्हील आणि फ्रंट गॅप एडिट करा.
- Set shelf reveal on partitions and configurationsSet the partition's shelf reveal, keep the design's reveal or let a configuration take the parent's value.
- शेल्फ स्थिर किंवा समायोज्य ठेवा आणि विभाजकांचा आकार निश्चित करास्थिर किंवा समायोज्य शेल्फ निवडा आणि विभाजकावरच विभाजकांची रुंदी व गुणोत्तरे निश्चित करा.
- कॅबिनेटमधील विभाजने समजून घ्या आणि त्यात शेल्फ, पॅनेल किंवा ड्रॉवर जोडाInfurnia मध्ये विभाजन म्हणजे काय ते जाणून घ्या आणि विभाजन स्तरावर शेल्फ, उभे पॅनेल किंवा ड्रॉवर जोडा.
- शेल्फ किंवा पार्टिशन का हटवता येत नाहीLearn why a shelf or partition panel may be protected from deletion and how to work around it.
- शटर आणि ड्रॉवर यांच्यामध्ये शेल्फ संरेखित कराशटर आणि ड्रॉवर यांच्यामध्ये शेल्फ डीफॉल्टनुसार कुठे असते आणि एक्स्टेंशन समायोजित करून त्याचे संरेखन कसे बदलावे, ते जाणून घ्या.
- शेल्फचा प्रकार समायोज्यावरून स्थिरात बदलाविभाजन स्तरावर जोडलेले शेल्फ सुरुवातीला समायोज्य असतात, आणि पॅनेल स्तरावर त्यांचा प्रकार बदलून तुम्ही एक शेल्फ स्थिर करू शकता.
- पूर्वनिर्धारित विभाजन संरचना निवडावैयक्तिक युनिट्स टाकण्याऐवजी, ज्याची फिलर बाजू आवश्यकतेशी जुळते अशी तयार मांडणी निवडा.
- शेल्फ आणि उभ्या जागा समान किंवा अचूक मापाने विभाजित कराAdd shelves आणि उभ्या विभाजने डीफॉल्टनुसार जागा समान विभाजित करतात, किंवा जागा निवडून अचूक माप टाकून ती असमानपणे विभाजित करा.
- डीफॉल्ट शेल्फ रिव्हील अंतर कसे कार्य करतेशेल्फ रिव्हील अंतर डीफॉल्टनुसार किती सेट आहे आणि कॅटलॉग नोंदी तयार करताना ते का नोंदवावे, ते जाणून घ्या.
- विभाजन विभाग लॉक करा आणि त्याची अचूक उंची सेट कराविभाजन विभाग fixed वर स्विच करा, त्याला मापे द्या आणि अचूक विभाजन उंची सेट करा.
- आतील शेल्फ स्थिर करा आणि शटरचे मटेरियल सेट कराकॅबिनेटचा आतील शेल्फ स्थिर पॅनेल म्हणून सेट करा आणि तो समोरून 20 मिमी कमी करा.
- Front shift वापरून विभाजने आणि नमुने भिंतीपासून पुढे सरकवाभिंतीपासून पुढचे अंतर सेट करा जेणेकरून विभाजने, राफ्टर्स आणि काढलेले नमुने तुम्हाला हव्या त्या अंतरावर राहतील.
- संरचनेत शेल्फ जोडण्यापूर्वी उभा विभाजक काढाजिथे सध्या उभा विभाजक आहे तिथे शेल्फ ठेवण्यासाठी प्रथम विभाजक काढा, शेल्फ जोडा आणि नंतर उभ्या विभाजकाच्या पायरीवर परत जा.
- Split an L-corner partition into Front Major or Side MajorSplit the L-corner partition, add shelves to each section and align the panel dimensions.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- विभाजन भाग आपोआप कसे मापले जातात आणि लॉक कसे होतातऑटो आणि स्थिर विभाजन भाग जागा कशी वाटून घेतात आणि एक भाग नेहमी आपोआप समायोजित का राहतो ते पहा.
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- विभाजनावर जतन केलेले विभाजन कॉन्फिगरेशन लोड कराविभाजनावरील 'Partition Configuration' ड्रॉपडाउन उघडा आणि जतन केलेले कॉन्फिगरेशन लागू करा, ते विभागात बसते का ते तपासा.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- शेल्फ ॲनोटेशन्स डीफॉल्टनुसार स्केलेटन व्ह्यूमध्ये दिसतातशेल्फ ॲनोटेशन्स डीफॉल्टनुसार स्केलेटन व्ह्यूमध्ये ॲडजस्टेबल, फिक्स्ड आणि ग्लास शेल्फ्स चिन्हांकित करतात, आणि तुम्ही LHS property panel मधून ती बंद करू शकता.
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- विभाजन स्तर आणि ड्रॉवर संचाद्वारे कॅबिनेटमध्ये ड्रॉवर जोडाकॅबिनेटच्या विभाजन स्तरावरून कॅबिनेटमध्ये ड्रॉवर घाला, नंतर त्याची उंची सेट करा आणि आवश्यक असल्यास खाली शेल्फ जोडा.
- संपूर्ण कॅबिनेटला किंवा एका विभाजनाला शटर सिस्टम जोडाउघड्या कॅबिनेटला संपूर्णपणे किंवा फक्त एका विभाजनाला शटर सिस्टम जोडा.
- शटर काढून आणि शेल्फ झोन जोडून वॉर्डरोबमध्ये बाह्य ड्रॉवर तयार कराविद्यमान शटर काढा आणि शेल्फ झोन जोडा, जेणेकरून तुम्ही वॉर्डरोबमध्ये बाह्य ड्रॉवर तयार करू शकता.
- विभाजके, शेल्फ आणि ड्रॉवर सिस्टीम वापरून वॉर्डरोबचे अंतर्गत भाग तयार करावॉर्डरोबच्या विभाजकांच्या आत Add shelves, ड्रॉवर सिस्टीम आणि बांधणीचे पर्याय वापरून त्याचे अंतर्गत भाग तयार करा.
- विभाजनाला शटर जोडाविभाजनाला स्वतःचे शटर द्या आणि एकच शटर, दुहेरी स्विंग किंवा लिफ्ट-अप यांपैकी निवडा.
- Add Shutter System द्वारे एका विभाजनावर शटर जोडाकॅबिनेटच्या फक्त एका विभाजनावर शटर बसवण्यासाठी ते विभाजन निवडा आणि त्याच्या पर्यायांमधून Add Shutter System निवडा.
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- शटर्स पॅनेल आणि पार्टिशनशी संरेखित कराशटर्स फ्लश बसावेत, पूर्ण उंचीवर राहावेत किंवा पार्टिशन उघडे ठेवावे यासाठी प्रत्येक कडेचे कपात मूल्य समायोजित करा.
- कॅबिनेटच्या जागा उभ्या विभाजकांनी विभाजित कराजागा विभाजित करण्यासाठी आणि त्यांची रुंदी गुणोत्तराने किंवा स्पष्ट मूल्यांनी ठरवण्यासाठी Add vertical partitions वापरा.
- ड्रॉवर सिस्टम नियंत्रणांद्वारे विभाजनातून ड्रॉवर जोडा किंवा काढाAdd drawers to a partition from the partition section and remove them from the drawer system, while also adding shelves or vertical partitions.
- बांधणीपूर्वी ड्रॉवर, शटर आणि विभाजने नियोजित कराअंतर्गत भाग सानुकूलित करण्यापूर्वी शेल्फ रिव्हील, विभाजनांची उंची आणि शटर किंवा ड्रॉवर झोन सेट करा.
- स्पेस विभाजनातील शेल्फला जोडून ड्रॉवर जोडाआवश्यक उंचीवर आधी शेल्फ जोडून, नंतर स्पेस विभाजनातील त्या शेल्फला ड्रॉवर जोडून, कंपार्टमेंटमध्ये ड्रॉवर ठेवा.
- Add a drawer set from the partition's quick access menuAdd external or internal drawers to a partition and place LHS and RHS drawer sets side by side correctly.
- उभ्या विभाजनासह शेजारी-शेजारी ड्रॉव्हर जोडादोन ड्रॉव्हरमध्ये एक उभे विभाजन ठेवून आणि त्याची उंची ड्रॉव्हरच्या उंचीइतकी करून शेजारी-शेजारी ड्रॉव्हर तयार करा.
- विभाजनांवर सरकणारी आणि सामान्य शटर यंत्रणा लागू करायोग्य विभाजनावर शटर प्रणाली जोडा आणि त्या विभाजनाला परवानगी असलेली यंत्रणा निवडा.
- शटर जोडण्यापूर्वी वॉर्डरोबला मुख्य विभाजने करून घ्याप्रथम वॉर्डरोबला मुख्य विभाजनांमध्ये विभागा, नंतर शेल्फ आणि उभ्या भागांसाठी त्यांचे उपविभाजन करा आणि त्यानंतर सानुकूलित यंत्रणांसह शटर सिस्टम जोडा.
- विभाजनावर काढून टाकलेली शटर प्रणाली पुनर्संचयित कराज्या विभाजनाचे शटर काढून टाकले आहेत, त्यावर स्विंग शटर प्रणाली पुन्हा जोडा, किंवा None ने ती पुन्हा काढून टाका.
- एलिव्हेशन प्राधान्यांमध्ये शटरची दिशा, युनिट आणि शेल्फ ॲनोटेशन्स टॉगल कराएलिव्हेशन प्राधान्यांमध्ये शटरची दिशा, युनिट ॲनोटेशन्स आणि शेल्फ ॲनोटेशन्स चालू किंवा बंद करून कोणती एलिव्हेशन ॲनोटेशन्स दिसतील ते नियंत्रित करा.
- उल्लंघनांच्या यादीतून हिंज आणि शेल्फचे टक्कर स्वयंचलितपणे सोडवाउल्लंघन तपासणीत टक्कर नोंदवली गेल्यास, जसे की स्थिर शेल्फच्या त्याच स्थानावर ठेवलेला हिंज, तेव्हा स्वयंचलितपणे सोडवा पर्याय वापरा.
- हिंज-शेल्फ टक्कर ओळखण्यासाठी हिंजची मापे कॉन्फिगर कराहिंज-शेल्फ टक्कर ओळखता याव्यात यासाठी प्रत्येक हिंज प्रकारासाठी स्वतंत्रपणे मापे कॉन्फिगर करा.
- विभाजकाचे मापन ऋण ऑफसेटने समायोजित करून ड्रॉवर फॅसियाची उंची सेट कराऋण ऑफसेटने ड्रॉवर फॅसियाची उंची सेट करता तेव्हा दाखवलेली विभाजकाची उंची पूर्ण उंचीतून पॅनलची जाडी वजा करून कशी येते ते पहा.
- कॅबिनेट पॅनेलच्या स्वतःच्या स्तरावर फिनिश आणि शेल्फ पर्याय सेट कराकॅबिनेट पॅनेलचा स्वतःचा स्तर उघडा आणि त्याचे बाह्य व अंतर्गत फिनिश कुठून येतात ते निवडा, त्या पॅनेलसाठीच कस्टम फिनिश निवडा, आणि शेल्फचा प्रकार व दृश्यता सेट करा.
- कॅबिनेट, पार्टिशन, शटर आणि पॅनल नियंत्रणांपर्यंत पोहोचण्यासाठी सिलेक्शन ट्री वापरात्याच्या वरील स्तर दाखवण्यासाठी आणि आपल्याला आवश्यक असलेल्या नियंत्रणांवर थेट जाण्यासाठी कॅबिनेटचा भाग निवडा.
- Create side-by-side drawers manually with a vertical partitionBuild side-by-side drawers by adding a shelf and a vertical partition, then placing a drawer on each side.
- स्केलेटन मोडने कॅबिनेटमधील अंतर्गत विभाजनांचे मापन कराअंतर्गत विभाजनांची मापे जोडण्यासाठी स्केलेटन मोड सुरू करा, किंवा त्याऐवजी विभाजनांचे मापन हाताने करा.
- Position a partition panel using partition height, depth and shelf revealPlace a horizontal partition panel by adding a custom panel, rotating it, and setting its left-right dimension and X and Y positions.
- कॅबिनेट किंवा पार्टिशनवर बाह्य आणि आंतरिक मर्यादांसाठी साइझिंग नियम सेट करायुनिटच्या मर्यादा त्याच्या बाह्य मापांवर लागू होतात की त्याच्या आंतरिक मोकळ्या जागेवर, ते निवडा आणि त्या एका वेळी एका युनिटवर किंवा एकत्रितपणे लागू करा.
- कन्स्ट्रक्शन डीफॉल्ट पार्टिशन सेटिंग्ज वापरून कॅबिनेटचा मागील पॅनेल विभाजित कराकॅबिनेट निवडा आणि मागील पॅनेल विभाजित करण्यासाठी किंवा उभा विभाजक जोडण्यासाठी त्याच्या कन्स्ट्रक्शन डीफॉल्ट पार्टिशन पर्यायांचा वापर करा.
- Split top and bottom panels प्रति उभ्या विभाजनासाठीकॅबिनेटचे वरचे आणि खालचे पॅनेल प्रत्येक उभ्या विभागासाठी एका तुकड्यात विभागा, जेणेकरून प्रत्येक तुकडा त्या विभागाच्या रुंदीनुसार असेल आणि टोकाचे तुकडे आपोआप बाजूंवर पसरतील.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
आणखी मार्गदर्शक 2
सर्व दाखवा (2)
- समायोज्य शेल्फचे आकार स्थिर शेल्फपेक्षा वेगळे कसे असतातसमायोज्य शेल्फ स्थिर शेल्फपेक्षा थोडे अरुंद का बनवले जातात आणि शेल्फ स्थिर केल्यावर ते कसे बदलते, ते जाणून घ्या.
- Know what applying, removing or replacing a configuration clearsLearn which parts of a partition survive a configuration change and which are removed with it.