ପାର୍ଟିସନ, ସେଲ୍ଫ ଏବଂ ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ
ଗାଇଡ୍: 104
- ପାର୍ଟିସନ, ସେଲ୍ଫ, ଡ୍ରୟର ଏବଂ ସଟର ଯୋଡ଼ନ୍ତୁ ଏବଂ ବିନ୍ୟାସ କରନ୍ତୁପାର୍ଟିସନ ସ୍ତରରେ ଉପାଦାନ ଯୋଡ଼ନ୍ତୁ, ଯାହାଫଳରେ ପ୍ରତ୍ୟେକ ସେଲ୍ଫ, ଡ୍ରୟର ସେଟ୍ କିମ୍ବା ସଟର ସିଷ୍ଟମ କେବଳ ୟୁନିଟର ସେହି ଅଂଶ ପାଇଁ ଲାଗୁ ହେବ।
- ଏକ ସେଲ୍ଫକୁ ଅନୁବାଦ ନକରି ପାର୍ଟିସନ ମାପ ପରିବର୍ତ୍ତନ କରନ୍ତୁପାର୍ଟିସନ ସ୍ତରଗୁଡ଼ିକୁ ପରିଚାଳନା କରି ଏକ କ୍ୟାବିନେଟ୍ ସଜାଡ଼ନ୍ତୁ, ପାର୍ଟିସନ ସ୍ତରରେ ଏକ ଶଟର ସିଷ୍ଟମ ଯୋଡ଼ନ୍ତୁ, ଏବଂ ଏକ ସେଲ୍ଫକୁ ଅନୁବାଦ କରିବାରୁ ବିରତ ରୁହନ୍ତୁ ଯାହାଫଳରେ ସେଲ୍ଫ ତଥାପି ପାର୍ଟିସନ ବିନ୍ୟାସ ସହିତ ମେଳ ଖାଉ।
- Add shelves via partition and shutters via shutter systemAdd a shelf with the partition option and add shutters with the Add Shutter System option, then set the mechanism to single or double swing.
- Adjust shelf reveal at partition or panel levelChange the shelf reveal at partition level or move a single shelf's front edge at panel level so internal shelves clear a clash.
- ପାର୍ଟିସନ ବିଭାଜନ ନିୟନ୍ତ୍ରଣ କରିବାକୁ ଏବଂ ଡ୍ରୟର ଯୋଡ଼ିବାକୁ ସ୍ଥିର ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁଏକ ସେଲ୍ଫ କିମ୍ବା ଭର୍ଟିକାଲ ପାର୍ଟିସନ ସହିତ କ୍ୟାବିନେଟ ପାର୍ଟିସନକୁ ବିଭାଜିତ କରନ୍ତୁ, ଏହାର ଆକାର ନିର୍ଣ୍ଣୟ କରିବାକୁ ଏକ ସେକ୍ସନ ଉପରେ ସ୍ଥିର ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁ, ତାପରେ ଏକ ହ୍ୟାଙ୍ଗିଂ ରଡ୍ କିମ୍ବା ସେଲ୍ଫ ଯୋଡ଼ନ୍ତୁ।
- ବାହ୍ୟ ଶଟର ଏବଂ ଡ୍ରୟର ପାଇଁ ସେଲ୍ଫ ରିଭିଲକୁ ଶୂନ୍ୟରେ ସେଟ୍ କରନ୍ତୁସେଲ୍ଫ ରିଭିଲକୁ ଶୂନ୍ୟରେ ସେଟ୍ କରନ୍ତୁ, ଯାହାଫଳରେ ବାହ୍ୟ ଶଟର ଏବଂ ଡ୍ରୟରଗୁଡ଼ିକ ଆଭ୍ୟନ୍ତରୀଣ ସେଲ୍ଫ ବ୍ୟବଧାନ ଦ୍ୱାରା ଅଫସେଟ୍ ନ ହେବ।
- ୱାର୍ଡ୍ରୋବ୍ ସେଲ୍ଫ ଏବଂ ହିଞ୍ଜ ରିଭିଲ୍ ୫ ମିମିରୁ ଅଧିକ ରଖନ୍ତୁଏମିତି ଏକ ସେଲ୍ଫ ରିଭିଲ୍ ବାଛନ୍ତୁ ଯାହା ଯଥେଷ୍ଟ ବଡ଼ ହେବ, ଯାହାଫଳରେ ୱାର୍ଡ୍ରୋବ୍ ସେଲ୍ଫ ଏବଂ ହିଞ୍ଜ ପରସ୍ପର ସହ ଘଷାଘଷି ନ ହେବ, ତାପରେ ଏହାକୁ ହିଞ୍ଜ ସ୍ଥାନ ସହ ଯାଞ୍ଚ କରନ୍ତୁ।
- ଦୁଇ ପାଖରେ ଏକ ଭର୍ଟିକାଲ ପାର୍ଟିସନ ଏବଂ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁଭର୍ଟିକାଲ ପାର୍ଟିସନ କେଉଁ ପାଖରେ ଯିବ ତାହା ବାଛନ୍ତୁ, ତାପରେ ଭର୍ଟିକାଲ ଏବଂ ସେଲଫଗୁଡ଼ିକ ସ୍ଥାପିତ ହେବା ପରେ ପ୍ରତ୍ୟେକ ପାଖରେ ଡ୍ରୟର ଯୋଡ଼ି ସେଗୁଡ଼ିକୁ ବିନ୍ୟାସ କରନ୍ତୁ।
- ଏକ ପାର୍ଟିସନରେ Add shelves କରନ୍ତୁ ଏବଂ ସେଲଫ ରିଭିଲକୁ ଶୂନ୍ୟରେ ସେଟ୍ କରନ୍ତୁଏକ ଚୟନିତ ପାର୍ଟିସନ ସ୍ପେସକୁ Add shelves କରନ୍ତୁ ଏବଂ ସେଲଫ ରିଭିଲକୁ ଶୂନ୍ୟରେ ସେଟ୍ କରନ୍ତୁ ଯାହାଫଳରେ ସାମ୍ନା ପଟରୁ କୌଣସି ଫାଙ୍କ ନ ରହିବ।
- ପାର୍ଟିସନ ଏବଂ ୱାର୍ଡରୋବ ମଧ୍ୟରେ ସେଲ୍ଫ ରିଭିଲ ପରିଚାଳନା କରନ୍ତୁସେଲ୍ଫ ରିଭିଲ କିପରି ନେଷ୍ଟେଡ ପାର୍ଟିସନ ପର୍ଯ୍ୟନ୍ତ ପହଞ୍ଚେ ଏବଂ ଏକାସାଙ୍ଗରେ ଅନେକ ୱାର୍ଡରୋବରେ ଏହା କିପରି ଲାଗୁ କରିବେ ତାହା ବୁଝନ୍ତୁ।
- Split a partition and edit child partitionsAdd a partition at partition level to split the parent area and edit each child partition on its own.
- ୱାର୍ଡରୋବରେ ପୃଥକ ପାର୍ଟିସନ ସହିତ କାମ କରନ୍ତୁବିଭାଜିତ ୱାର୍ଡରୋବର ପ୍ରତ୍ୟେକ ପାର୍ଟିସନକୁ ଅଲଗା ଭାବରେ ଚୟନ କରନ୍ତୁ, ଯାହାଫଳରେ ଆପଣ କେବଳ ଗୋଟିଏ ଜୋନରେ ଏକ ସଟର ଯୋଡ଼ିପାରିବେ କିମ୍ବା ଅନ୍ୟଗୁଡ଼ିକୁ ସ୍ପର୍ଶ ନକରି ଏହାର ସେଲଫଗୁଡ଼ିକୁ ପରିବର୍ତ୍ତନ କରିପାରିବେ।
- କ୍ୟାବିନେଟ ଜୋନ ଭିତରେ ପାର୍ଟିସନ ଏବଂ ଗ୍ଲାସ ଯୋଡ଼ନ୍ତୁକ୍ୟାବିନେଟ ଜୋନ ଭିତରର ଖାଲି ସ୍ଥାନରେ ପାର୍ଟିସନ ଯୋଡ଼ି କ୍ୟାବିନେଟର ଭିତର ଭାଗକୁ ସମାନ ଭାବରେ ବିଭକ୍ତ କରନ୍ତୁ।
- ପ୍ୟାନେଲ ବିଭାଗ ନିର୍ମାଣ ମାଧ୍ୟମରେ ଏକ ସେଲ୍ଫରେ ପ୍ରୋଫାଇଲ ଯୋଡ଼ନ୍ତୁଆବଶ୍ୟକ ପାଖରେ ପ୍ୟାନେଲ ବିଭାଗର construction/top ସେଟିଂସରୁ ଯୋଡ଼ି ଏକ ସେଲ୍ଫରେ ପ୍ରୋଫାଇଲ ରଖନ୍ତୁ।
- ପାର୍ଟିସନ ଉପରେ କ୍ଲିକ କରି Add shelves ଏବଂ ଝୁଲାଇବା ସ୍ଥାନ ଯୋଡ଼ନ୍ତୁୱାର୍ଡ୍ରୋବ ଭିତରେ ସେଲ୍ଫ ଏବଂ ଝୁଲାଇବା ସ୍ଥାନ ଯୋଡ଼ିବା ପାଇଁ ଏକ ପାର୍ଟିସନ ଉପରେ କ୍ଲିକ କରନ୍ତୁ, ଏବଂ ତଳେ ଡ୍ରୟର ଚାରିପାଖରେ ଯୋଜନା କରନ୍ତୁ।
- ଶଟର ସ୍ଥାନରେ 20 କିମ୍ବା 25 ର ଏକ ସେଲ୍ଫ ରିଭିଲ ଲଗାନ୍ତୁଡ୍ରୟର ସେଟ ଯୋଡିବା ପୂର୍ବରୁ ସେଲ୍ଫ ଓ ପାର୍ଟିସନ ସେଟ ହେବା ପାଇଁ ଶଟର ସ୍ଥାନରେ 20 କିମ୍ବା 25 ର ଏକ ସେଲ୍ଫ ରିଭିଲ ଲଗାନ୍ତୁ।
- ୱାର୍ଡ୍ରୋବ ପାର୍ଟିସନ, ସେଲ୍ଫ ଓ ଜୋନ କଷ୍ଟମାଇଜ କରନ୍ତୁଗ୍ରାହକଙ୍କ ଆବଶ୍ୟକତା ଅନୁସାରେ ପାର୍ଟିସନ, ସେଲ୍ଫ ଓ ଜୋନ ସଜାଡ଼ନ୍ତୁ, ଯେଉଁଥିରେ ଲମ୍ବା ହାଙ୍ଗିଂ ସ୍ଥାନ କିମ୍ବା ଡ୍ରୟର ବିନ୍ୟାସ ଅନ୍ତର୍ଭୁକ୍ତ।
- ଏକ ପାର୍ଟିସନ୍ର ଉଚ୍ଚତା ବଦଳାଇବା ପାଇଁ ଏହାକୁ ସ୍ଥିର ଉଚ୍ଚତାରେ ସେଟ୍ କରନ୍ତୁଏକ ପାର୍ଟିସନ୍କୁ ସ୍ଥିର ଉଚ୍ଚତାକୁ ସୁଇଚ୍ କରି ଆବଶ୍ୟକ ଉଚ୍ଚତା ପ୍ରବେଶ କରି ଏହାକୁ ଅଧିକ ଉଚ୍ଚ କିମ୍ବା କମ୍ ଉଚ୍ଚ କରନ୍ତୁ।
- ୱାର୍ଡରୋବ ପ୍ରିଫରେନ୍ସରେ ସେଲ୍ଫ ଏବଂ ପାର୍ଟିସନ ଏଜ୍ ଦୃଶ୍ୟମାନତା ସେଟ୍ କରନ୍ତୁକ୍ୟାବିନେଟ ପ୍ରିଫରେନ୍ସ / ୱାର୍ଡରୋବ ପ୍ରିଫରେନ୍ସରେ ସ୍ଥିର ସେଲ୍ଫ, ସମାୟୋଜ୍ୟ ସେଲ୍ଫ ଏବଂ ଭର୍ଟିକାଲ ପାର୍ଟିସନ ପ୍ୟାନେଲ ପାଇଁ ଫ୍ରଣ୍ଟ/କାର୍କାସ ଦୃଶ୍ୟମାନ ଏଜ୍ ବ୍ୟାଣ୍ଡକୁ କାର୍କାସ ଅଦୃଶ୍ୟ ସେଟ୍ କରନ୍ତୁ।
- ଫ୍ଲସ୍ ସେଲଫ ପାଇଁ ସେଲଫ ରିଭିଲ ଏବଂ ଫ୍ରଣ୍ଟ ଗ୍ୟାପ ଶୂନ୍ୟରେ ସେଟ କରନ୍ତୁସେଲଫଗୁଡ଼ିକୁ ଫ୍ଲସ୍ କରିବା ପାଇଁ ବାମ ପଟ ପ୍ୟାନେଲରେ ଥିବା ସେଲଫ/ପ୍ୟାନେଲ ନିର୍ମାଣ ସେଟିଂସରେ ସେଲଫ ରିଭିଲ ଏବଂ ଫ୍ରଣ୍ଟ ଗ୍ୟାପ ସମ୍ପାଦନ କରନ୍ତୁ।
- Set shelf reveal on partitions and configurationsSet the partition's shelf reveal, keep the design's reveal or let a configuration take the parent's value.
- ସେଲଫଗୁଡ଼ିକୁ ସ୍ଥିର କିମ୍ବା ସମାୟୋଜ୍ୟ ଭାବରେ ସେଟ୍ କରନ୍ତୁ ଏବଂ ପାର୍ଟିସନର ଆକାର ନିର୍ଧାରଣ କରନ୍ତୁସ୍ଥିର କିମ୍ବା ସମାୟୋଜ୍ୟ ସେଲଫ ବାଛନ୍ତୁ ଏବଂ ପାର୍ଟିସନ ଉପରେ ହିଁ ପାର୍ଟିସନର ପ୍ରସ୍ଥ ଓ ଅନୁପାତ ସେଟ୍ କରନ୍ତୁ।
- ପାର୍ଟିସନ ବୁଝନ୍ତୁ ଏବଂ ଏକ କ୍ୟାବିନେଟ ଭିତରେ ସେଲ୍ଫ, ପ୍ୟାନେଲ କିମ୍ବା ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁInfurnia ରେ ପାର୍ଟିସନ କ'ଣ ତାହା ଜାଣନ୍ତୁ ଏବଂ ପାର୍ଟିସନ ସ୍ତରରେ ସେଲ୍ଫ, ଭର୍ଟିକାଲ ପ୍ୟାନେଲ କିମ୍ବା ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁ।
- କାହିଁକି ଏକ ସେଲଫ କିମ୍ବା ପାର୍ଟିସନ ଡିଲିଟ କରାଯାଇପାରିବ ନାହିଁଏକ ସେଲଫ କିମ୍ବା ପାର୍ଟିସନ ପ୍ୟାନେଲ କାହିଁକି ଡିଲିଟରୁ ସୁରକ୍ଷିତ ରହିପାରେ ଏବଂ ଏହାକୁ କିପରି ସମାଧାନ କରିବେ ଜାଣନ୍ତୁ।
- ଏକ ଶଟର ଏବଂ ଏକ ଡ୍ରୟର ମଧ୍ୟରେ ଏକ ସେଲ୍ଫ ସଂରେଖଣ କରନ୍ତୁଏକ ଶଟର ଏବଂ ଏକ ଡ୍ରୟର ମଧ୍ୟରେ ଏକ ସେଲ୍ଫ ଡିଫଲ୍ଟ ଭାବରେ କେଉଁଠି ରହେ ଏବଂ ଏକ୍ସଟେନସନ ଆଡଜଷ୍ଟ କରି ଏହାର ସଂରେଖଣ କିପରି ବଦଳାଇବେ ଶିଖନ୍ତୁ।
- ଏକ ସେଲଫକୁ ସମାୟୋଜ୍ୟରୁ ସ୍ଥିରକୁ ବଦଳାନ୍ତୁପାର୍ଟିସନ୍ ସ୍ତରରେ ଯୋଡ଼ାଯାଇଥିବା ସେଲଫଗୁଡ଼ିକ ଆରମ୍ଭରେ ସମାୟୋଜ୍ୟ ଥାଏ, ଏବଂ ପ୍ୟାନେଲ୍ ସ୍ତରରେ ଏହାର ପ୍ରକାର ବଦଳାଇ ଆପଣ ଏହାକୁ ସ୍ଥିର କରିପାରିବେ।
- ଏକ ପୂର୍ବନିର୍ଦ୍ଧାରିତ ବିଭାଜନ ସଂରଚନା ଚୟନ କରନ୍ତୁଅଲଗା ଅଲଗା ୟୁନିଟ୍ ରଖିବା ପରିବର୍ତ୍ତେ, ଯାହାର ଫିଲର୍ ପାର୍ଶ୍ୱ ଆବଶ୍ୟକତା ସହ ମେଳ ଖାଉଛି, ଏପରି ଏକ ପ୍ରସ୍ତୁତ ଲେଆଉଟ୍ ବାଛନ୍ତୁ।
- ସେଲଫ ଏବଂ ଭର୍ଟିକାଲ ସ୍ପେସଗୁଡ଼ିକୁ ସମାନ ଭାବରେ କିମ୍ବା ସଠିକ୍ ମାପ ଅନୁସାରେ ବିଭାଜିତ କରନ୍ତୁAdd shelves ଏବଂ ଭର୍ଟିକାଲଗୁଡ଼ିକ ଡିଫଲ୍ଟ ଭାବରେ ସ୍ପେସକୁ ସମାନ ଭାବରେ ବିଭାଜିତ କରେ, କିମ୍ବା ଏକ ସ୍ପେସ ଚୟନ କରି ଅସମାନ ଭାବରେ ବିଭାଜନ କରିବା ପାଇଁ ସଠିକ୍ ମାପ ପ୍ରବେଶ କରନ୍ତୁ।
- ଡିଫଲ୍ଟ ସେଲ୍ଫ ରିଭିଲ ଦୂରତା କିପରି କାମ କରେସେଲ୍ଫ ରିଭିଲ ଦୂରତା ଡିଫଲ୍ଟରେ କେତେ ରଖାଯାଇଛି ଏବଂ କାଟାଲଗ ଏଣ୍ଟ୍ରି ତିଆରି କରିବା ସମୟରେ ଏହା କାହିଁକି ଲେଖିବେ ତାହା ଜାଣନ୍ତୁ।
- ଏକ ପାର୍ଟିସନ ବିଭାଗକୁ ଲକ୍ କରନ୍ତୁ ଏବଂ ଏହାର ସଠିକ୍ ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁଏକ ପାର୍ଟିସନ ବିଭାଗକୁ fixed କୁ ସୁଇଚ୍ କରନ୍ତୁ, ଏହାକୁ ମାପ ଦିଅନ୍ତୁ ଏବଂ ସଠିକ୍ ପାର୍ଟିସନ ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁ।
- ଭିତର ସେଲ୍ଫକୁ ସ୍ଥିର କରନ୍ତୁ ଏବଂ ଶଟର ସାମଗ୍ରୀ ସେଟ୍ କରନ୍ତୁକ୍ୟାବିନେଟର ଭିତର ସେଲ୍ଫକୁ ସ୍ଥିର ପ୍ୟାନେଲ ଭାବରେ ସେଟ୍ କରନ୍ତୁ ଏବଂ ସାମୁଖ୍ୟରୁ 20 mm କମାନ୍ତୁ।
- Front shift ସହିତ କାନ୍ଥରୁ ଆଗକୁ ପାର୍ଟିସନ ଏବଂ ପ୍ୟାଟର୍ନଗୁଡ଼ିକୁ ଅଫସେଟ କରନ୍ତୁକାନ୍ଥରୁ ଆଗକୁ ଏକ ଅଫସେଟ ସେଟ କରନ୍ତୁ ଯାହାଫଳରେ ପାର୍ଟିସନ, ରାଫ୍ଟର ଏବଂ ଅଙ୍କିତ ପ୍ୟାଟର୍ନଗୁଡ଼ିକ ଆପଣ ଚାହୁଁଥିବା ଦୂରତାରେ ରହିବ।
- ସଂରଚନାରେ ଏକ ସେଲ୍ଫ ଯୋଡ଼ିବା ପୂର୍ବରୁ ଭୂଲମ୍ବ ପାର୍ଟିସନ ହଟାନ୍ତୁଯେଉଁଠାରେ ବର୍ତ୍ତମାନ ଏକ ଭୂଲମ୍ବ ପାର୍ଟିସନ ଅଛି ସେଠାରେ ସେଲ୍ଫ ରଖିବା ପାଇଁ ପ୍ରଥମେ ପାର୍ଟିସନ ହଟାନ୍ତୁ, ସେଲ୍ଫ ଯୋଡ଼ନ୍ତୁ, ତାପରେ ଭୂଲମ୍ବ ପାର୍ଟିସନ ପଦକ୍ଷେପକୁ ଫେରନ୍ତୁ।
- L-କୋଣ ବିଭାଜକକୁ Front Major କିମ୍ବା Side Major ରେ ବିଭକ୍ତ କରନ୍ତୁL-କୋଣ ବିଭାଜକକୁ ବିଭକ୍ତ କରନ୍ତୁ, ପ୍ରତ୍ୟେକ ଅଂଶରେ ତାକ୍ତା ଯୋଡ଼ନ୍ତୁ ଏବଂ ପ୍ୟାନେଲ ମାପ ସଂରେଖଣ କରନ୍ତୁ।
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- ପାର୍ଟିସନ ବିଭାଗଗୁଡ଼ିକ କିପରି ସ୍ୱୟଂ-ଆକାର ଓ ଲକ୍ ହୁଏଦେଖନ୍ତୁ କିପରି ଅଟୋ ଓ ସ୍ଥିର ପାର୍ଟିସନ ବିଭାଗ ଜାଗା ବାଣ୍ଟନ୍ତି ଏବଂ କାହିଁକି ଗୋଟିଏ ବିଭାଗ ସର୍ବଦା ସ୍ୱୟଂ-ସମାୟୋଜିତ ରହେ।
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- ଏକ ପାର୍ଟିସନ ଉପରେ ସଞ୍ଚିତ ପାର୍ଟିସନ ବିନ୍ୟାସ ଲୋଡ କରନ୍ତୁଏକ ପାର୍ଟିସନ ଉପରେ 'Partition Configuration' ଡ୍ରପଡାଉନ ଖୋଲନ୍ତୁ ଏବଂ ସଞ୍ଚିତ ବିନ୍ୟାସ ଲାଗୁ କରନ୍ତୁ, ଏହା ସେକ୍ସନରେ ଫିଟ ହେଉଛି କି ନାହିଁ ଯାଞ୍ଚ କରନ୍ତୁ।
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- ସେଲଫ୍ ଆନୋଟେସନ୍ଗୁଡ଼ିକ ସ୍କେଲିଟନ୍ ଦୃଶ୍ୟରେ ଡିଫଲ୍ଟ ଭାବରେ ଦେଖାଯାଏସେଲଫ୍ ଆନୋଟେସନ୍ଗୁଡ଼ିକ ସ୍କେଲିଟନ୍ ଦୃଶ୍ୟରେ ସମାୟୋଜ୍ୟ, ସ୍ଥିର ଏବଂ କାଚ ସେଲଫ୍ଗୁଡ଼ିକୁ ଡିଫଲ୍ଟ ଭାବରେ ଚିହ୍ନିତ କରେ, ଏବଂ ଆପଣ LHS ପ୍ରପର୍ଟି ପ୍ୟାନେଲରୁ ସେଗୁଡ଼ିକୁ ବନ୍ଦ କରିପାରିବେ।
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- ପାର୍ଟିସନ୍ ସ୍ତର ଏବଂ ଡ୍ରୟର ସେଟ୍ ମାଧ୍ୟମରେ ଏକ କ୍ୟାବିନେଟ୍ରେ ଏକ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁଏକ କ୍ୟାବିନେଟ୍ର ପାର୍ଟିସନ୍ ସ୍ତରରୁ ଏହାର ଭିତରେ ଏକ ଡ୍ରୟର ଭର୍ତ୍ତି କରନ୍ତୁ, ତାପରେ ଏହାର ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁ ଏବଂ ଆବଶ୍ୟକ ହେଲେ ତଳେ ଏକ ସେଲଫ୍ ଯୋଡ଼ନ୍ତୁ।
- ସମଗ୍ର କ୍ୟାବିନେଟ୍ କିମ୍ବା ଏକକ ପାର୍ଟିସନ୍ରେ ଏକ ସଟର୍ ସିଷ୍ଟମ୍ ଯୋଡ଼ନ୍ତୁଏକ ଖୋଲା କ୍ୟାବିନେଟ୍ରେ ସମଗ୍ର ଭାବରେ କିମ୍ବା କେବଳ ଏକ ପାର୍ଟିସନ୍ରେ ଏକ ସଟର୍ ସିଷ୍ଟମ୍ ଯୋଡ଼ନ୍ତୁ।
- ସଟର ହଟାଇ ଏବଂ ଏକ ସେଲ୍ଫ ଜୋନ ଯୋଡ଼ି ୱାର୍ଡରୋବର ବାହ୍ୟ ଡ୍ରୟର ତିଆରି କରନ୍ତୁୱାର୍ଡରୋବରେ ବାହ୍ୟ ଡ୍ରୟର ତିଆରି କରିବା ପାଇଁ ବିଦ୍ୟମାନ ସଟର ହଟାନ୍ତୁ ଏବଂ ଏକ ସେଲ୍ଫ ଜୋନ ଯୋଡ଼ନ୍ତୁ।
- ପାର୍ଟିସନ, ସେଲ୍ଫ ଓ ଡ୍ରୟର ସିଷ୍ଟମ ବ୍ୟବହାର କରି ୱାର୍ଡ୍ରୋବର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ତିଆରି କରନ୍ତୁୱାର୍ଡ୍ରୋବର ପାର୍ଟିସନ ଭିତରେ Add shelves, ଡ୍ରୟର ସିଷ୍ଟମ ଓ ନିର୍ମାଣ ବିକଳ୍ପ ଯୋଡ଼ି ଏହାର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ତିଆରି କରନ୍ତୁ।
- ଏକ ପାର୍ଟିସନରେ ଏକ ଶଟର ଯୋଡ଼ନ୍ତୁଏକ ପାର୍ଟିସନକୁ ନିଜର ଶଟର ଦିଅନ୍ତୁ ଏବଂ ଏକକ ଶଟର, ଦୁଇପାଖିଆ ସ୍ୱିଙ୍ଗ କିମ୍ବା ଲିଫ୍ଟ-ଅପ୍ ମଧ୍ୟରୁ ବାଛନ୍ତୁ।
- Add Shutter System ମାଧ୍ୟମରେ ଏକକ ବିଭାଜକରେ ଏକ ଶଟର ଯୋଡ଼ନ୍ତୁକ୍ୟାବିନେଟର କେବଳ ଗୋଟିଏ ବିଭାଜକ ଉପରେ ଶଟର ରଖିବା ପାଇଁ ସେହି ବିଭାଜକକୁ ଚୟନ କରନ୍ତୁ ଏବଂ ଏହାର ବିକଳ୍ପଗୁଡ଼ିକରୁ Add Shutter System ଚୟନ କରନ୍ତୁ।
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- ପ୍ୟାନେଲ ଏବଂ ପାର୍ଟିସନ ସହିତ ଶଟରଗୁଡ଼ିକୁ ସମାନ୍ତର କରନ୍ତୁପ୍ରତ୍ୟେକ ଧାରର ହ୍ରାସକୁ ସମାୟୋଜିତ କରନ୍ତୁ ଯାହାଫଳରେ ଶଟରଗୁଡ଼ିକ ସମତଳ ହେବ, ପୂର୍ଣ୍ଣ ଉଚ୍ଚତାରେ ରହିବ କିମ୍ବା ଏକ ପାର୍ଟିସନକୁ ଅନାବୃତ ଛାଡ଼ିବ।
- ଭର୍ଟିକାଲ ପାର୍ଟିସନ ସହିତ କ୍ୟାବିନେଟ ସ୍ଥାନକୁ ବିଭାଜିତ କରନ୍ତୁଏକ ସ୍ଥାନକୁ ବିଭାଜିତ କରିବା ଏବଂ ସେମାନଙ୍କ ଓସାରକୁ ଅନୁପାତ କିମ୍ବା ସ୍ପଷ୍ଟ ମୂଲ୍ୟ ଦ୍ୱାରା ସେଟ୍ କରିବା ପାଇଁ Add vertical partitions।
- ଡ୍ରୟର ସିଷ୍ଟମ ନିୟନ୍ତ୍ରଣ ମାଧ୍ୟମରେ ଏକ ପାର୍ଟିସନରୁ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁ କିମ୍ବା ହଟାନ୍ତୁAdd drawers to a partition from the partition section and remove them from the drawer system, while also adding shelves or vertical partitions.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- ସ୍ପେସ ପାର୍ଟିସନରେ ଏକ ସେଲ୍ଫ ସହିତ ସଂଯୋଗ କରି ଏକ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁପ୍ରଥମେ ଆବଶ୍ୟକ ଉଚ୍ଚତାରେ ଏକ ସେଲ୍ଫ ଯୋଡ଼ି, ତାପରେ ସ୍ପେସ ପାର୍ଟିସନରେ ସେହି ସେଲ୍ଫ ସହିତ ଡ୍ରୟରକୁ ସଂଯୋଗ କରି ଏକ କମ୍ପାର୍ଟମେଣ୍ଟ ଭିତରେ ଡ୍ରୟର ରଖନ୍ତୁ।
- ପାର୍ଟିସନର ଶୀଘ୍ର ପ୍ରବେଶ ମେନୁରୁ ଏକ ଡ୍ରୟର ସେଟ୍ ଯୋଡ଼ନ୍ତୁଏକ ପାର୍ଟିସନରେ ବାହ୍ୟ କିମ୍ବା ଆଭ୍ୟନ୍ତରୀଣ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁ ଏବଂ LHS ଓ RHS ଡ୍ରୟର ସେଟ୍ଗୁଡ଼ିକୁ ଠିକ୍ ଭାବରେ ପାଶ୍ୱରେ ପାଶ୍ୱରେ ରଖନ୍ତୁ।
- ଭର୍ଟିକାଲ ପାର୍ଟିଶନ ସହିତ ପାଶ୍ୱବର୍ତ୍ତୀ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁଦୁଇଟି ପାଶ୍ୱବର୍ତ୍ତୀ ଡ୍ରୟର ମଧ୍ୟରେ ଏକ ଭର୍ଟିକାଲ ପାର୍ଟିଶନ ରଖି ଏବଂ ଏହାକୁ ଡ୍ରୟର ଉଚ୍ଚତାକୁ ସେଟ୍ କରି ପାଶ୍ୱବର୍ତ୍ତୀ ଡ୍ରୟର ସୃଷ୍ଟି କରନ୍ତୁ।
- ପାର୍ଟିସନରେ ସ୍ଲାଇଡିଂ ଏବଂ ମାନକ ଶଟର ମେକାନିଜିମ ଲଗାନ୍ତୁଠିକ୍ ପାର୍ଟିସନରେ ଏକ ଶଟର ସିଷ୍ଟମ ଯୋଡ଼ନ୍ତୁ ଏବଂ ସେହି ପାର୍ଟିସନ ଅନୁମତି ଦେଉଥିବା ଏକ ମେକାନିଜିମ ବାଛନ୍ତୁ।
- ଶଟର ଯୋଡ଼ିବା ପୂର୍ବରୁ ୱାର୍ଡ୍ରୋବକୁ ମୁଖ୍ୟ ପାର୍ଟିସନରେ ବିଭକ୍ତ କରନ୍ତୁପ୍ରଥମେ ୱାର୍ଡ୍ରୋବକୁ ମୁଖ୍ୟ ପାର୍ଟିସନରେ ବିଭକ୍ତ କରନ୍ତୁ, ତାପରେ ସେଲ୍ଫ ଓ ଭର୍ଟିକାଲ ପାଇଁ ସେଗୁଡ଼ିକୁ ଉପବିଭାଗ କରନ୍ତୁ, ଏବଂ ପରେ କଷ୍ଟମାଇଜ୍ କରାଯାଇଥିବା ମେକାନିଜିମ୍ ସହିତ ଶଟର ସିଷ୍ଟମ ଯୋଡ଼ନ୍ତୁ।
- ଏକ ପାର୍ଟିସନ୍ରୁ ହଟାଯାଇଥିବା ସଟର୍ ସିଷ୍ଟମ୍ ପୁନଃସ୍ଥାପିତ କରନ୍ତୁଯେଉଁ ପାର୍ଟିସନ୍ର ସଟର୍ଗୁଡ଼ିକ ହଟାଯାଇଛି, ସେଥିରେ ପୁନର୍ବାର ସ୍ୱିଙ୍ଗ୍ ସଟର୍ ସିଷ୍ଟମ୍ ଯୋଡ଼ନ୍ତୁ, କିମ୍ବା None ସହିତ ସେଗୁଡ଼ିକୁ ପୁନର୍ବାର ହଟାନ୍ତୁ।
- ଏଲିଭେସନ ପସନ୍ଦରେ ଶଟର ଦିଗ, ୟୁନିଟ ଏବଂ ସେଲ୍ଫ ଆନୋଟେସନ ଟୋଗଲ କରନ୍ତୁଏଲିଭେସନ ପସନ୍ଦରେ ଶଟର ଦିଗ, ୟୁନିଟ ଆନୋଟେସନ ଏବଂ ସେଲ୍ଫ ଆନୋଟେସନ ଚାଲୁ କିମ୍ବା ବନ୍ଦ କରି କେଉଁ ଏଲିଭେସନ ଆନୋଟେସନ ଦେଖାଯିବ ତାହା ନିୟନ୍ତ୍ରଣ କରନ୍ତୁ।
- ଉଲ୍ଲଂଘନ ତାଲିକାରୁ ହିଞ୍ଜ ଏବଂ ସେଲ୍ଫ ଧକ୍କା ସ୍ୱୟଂ-ସମାଧାନ କରନ୍ତୁଯେତେବେଳେ ଉଲ୍ଲଂଘନ ଯାଞ୍ଚ ଏକ ସ୍ଥିର ସେଲ୍ଫ ସହିତ ସମାନ ସ୍ଥାନରେ ରଖାଯାଇଥିବା ହିଞ୍ଜ ପରି ଏକ ଧକ୍କା ରିପୋର୍ଟ କରେ, ସେତେବେଳେ ସ୍ୱୟଂ-ସମାଧାନ ବିକଳ୍ପ ବ୍ୟବହାର କରନ୍ତୁ।
- ହିଞ୍ଜ-ସେଲ୍ଫ ସଂଘର୍ଷ ଚିହ୍ନଟ ପାଇଁ ହିଞ୍ଜ ମାପ ବିନ୍ୟାସ କରନ୍ତୁହିଞ୍ଜ-ସେଲ୍ଫ ସଂଘର୍ଷ ଚିହ୍ନଟ ହୋଇପାରିବା ପାଇଁ ପ୍ରତ୍ୟେକ ହିଞ୍ଜ ପ୍ରକାର ପାଇଁ ମାପ ଅଲଗା ଭାବରେ ବିନ୍ୟାସ କରନ୍ତୁ।
- ଋଣାତ୍ମକ ଅଫସେଟ ସହିତ ପାର୍ଟିଶନ ମାପ ସମାୟୋଜନ କରି ଡ୍ରୟର ଫାସିଆ ଉଚ୍ଚତା ସେଟ କରନ୍ତୁଯେତେବେଳେ ଆପଣ ଋଣାତ୍ମକ ଅଫସେଟ ସହିତ ଡ୍ରୟର ଫାସିଆ ଉଚ୍ଚତା ସେଟ କରନ୍ତି, ଦେଖନ୍ତୁ ଯେ ଦେଖାଯାଉଥିବା ପାର୍ଟିଶନ ଉଚ୍ଚତା ସମ୍ପୂର୍ଣ୍ଣ ଉଚ୍ଚତାରୁ ପ୍ୟାନେଲ ମୋଟେଇ ବିୟୋଗ କରିବା ପରେ ମିଳେ।
- କ୍ୟାବିନେଟ ପ୍ୟାନେଲର ନିଜ ସ୍ତରରେ ଫିନିଶ ଏବଂ ସେଲଫ ବିକଳ୍ପ ସେଟ କରନ୍ତୁକ୍ୟାବିନେଟ ପ୍ୟାନେଲର ନିଜ ସ୍ତର ଖୋଲି ଏହାର ବାହ୍ୟ ଓ ଆଭ୍ୟନ୍ତରୀଣ ଫିନିଶ କେଉଁଠାରୁ ଆସିବ ତାହା ବାଛନ୍ତୁ, କେବଳ ସେହି ପ୍ୟାନେଲ ପାଇଁ ଏକ କଷ୍ଟମ ଫିନିଶ ବାଛନ୍ତୁ, ଏବଂ ସେଲଫର ପ୍ରକାର ଓ ଦୃଶ୍ୟତା ସେଟ କରନ୍ତୁ।
- କ୍ୟାବିନେଟ, ପାର୍ଟିସନ, ସଟର ଏବଂ ପ୍ୟାନେଲ ନିୟନ୍ତ୍ରଣରେ ପହଞ୍ଚିବା ପାଇଁ ସିଲେକ୍ସନ ଟ୍ରି ବ୍ୟବହାର କରନ୍ତୁଏହାର ଉପରର ସ୍ତରଗୁଡ଼ିକୁ ଦେଖାଇବା ଏବଂ ଆପଣଙ୍କୁ ଆବଶ୍ୟକ ନିୟନ୍ତ୍ରଣକୁ ସିଧାସଳଖ ଯିବା ପାଇଁ ଏକ କ୍ୟାବିନେଟ ଅଂଶ ଚୟନ କରନ୍ତୁ।
- ଭର୍ଟିକାଲ ପାର୍ଟିଶନ ସହିତ ପାର୍ଶ୍ୱ-ପାର୍ଶ୍ୱରେ ଡ୍ରୟରଗୁଡ଼ିକୁ ନିଜେ ତିଆରି କରନ୍ତୁଏକ ସେଲ୍ଫ ଏବଂ ଏକ ଭର୍ଟିକାଲ ପାର୍ଟିଶନ ଯୋଡ଼ି, ତାପରେ ପ୍ରତ୍ୟେକ ପାର୍ଶ୍ୱରେ ଏକ ଡ୍ରୟର ରଖି ପାର୍ଶ୍ୱ-ପାର୍ଶ୍ୱରେ ଡ୍ରୟରଗୁଡ଼ିକୁ ତିଆରି କରନ୍ତୁ।
- ସ୍କେଲିଟନ ମୋଡରେ କ୍ୟାବିନେଟର ଆଭ୍ୟନ୍ତରୀଣ ପାର୍ଟିସନର ମାପ ଦିଅନ୍ତୁଆଭ୍ୟନ୍ତରୀଣ ପାର୍ଟିସନର ମାପ ଯୋଡିବା ପାଇଁ ସ୍କେଲିଟନ ମୋଡ ଚାଲୁ କରନ୍ତୁ, କିମ୍ବା ଏହା ବଦଳରେ ହାତରେ ପାର୍ଟିସନର ମାପ ଦିଅନ୍ତୁ।
- Position a partition panel using partition height, depth and shelf revealPlace a horizontal partition panel by adding a custom panel, rotating it, and setting its left-right dimension and X and Y positions.
- କ୍ୟାବିନେଟ୍ କିମ୍ବା ପାର୍ଟିସନ୍ରେ ବାହ୍ୟ ଓ ଆଭ୍ୟନ୍ତରୀଣ ସୀମା ପାଇଁ ସାଇଜିଂ ନିୟମ ସେଟ୍ କରନ୍ତୁଏକ ୟୁନିଟ୍ର ସୀମା ଏହାର ବାହ୍ୟ ମାପ ଉପରେ ଲାଗୁ ହେବ କି ଏହାର ଆଭ୍ୟନ୍ତରୀଣ ଖାଲି ସ୍ଥାନ ଉପରେ ଲାଗୁ ହେବ ତାହା ବାଛନ୍ତୁ, ଏବଂ ସେଗୁଡ଼ିକୁ ଗୋଟିଏ ୟୁନିଟ୍ କରି କିମ୍ବା ଏକାସାଙ୍ଗରେ ଲାଗୁ କରନ୍ତୁ।
- କନଷ୍ଟ୍ରକ୍ସନ ଡିଫଲ୍ଟ ପାର୍ଟିସନ ସେଟିଂସ ବ୍ୟବହାର କରି ଏକ କ୍ୟାବିନେଟର ପଛ ପ୍ୟାନେଲ ବିଭକ୍ତ କରନ୍ତୁଏକ କ୍ୟାବିନେଟ ଚୟନ କରନ୍ତୁ ଏବଂ ପଛ ପ୍ୟାନେଲ ବିଭକ୍ତ କରିବା କିମ୍ବା ଏକ ଭର୍ଟିକାଲ ଡିଭାଇଡର ଯୋଡ଼ିବା ପାଇଁ ଏହାର କନଷ୍ଟ୍ରକ୍ସନ ଡିଫଲ୍ଟ ପାର୍ଟିସନ ବିକଳ୍ପଗୁଡ଼ିକ ବ୍ୟବହାର କରନ୍ତୁ।
- Split top and bottom panels ପ୍ରତି ଭର୍ଟିକାଲ ପାର୍ଟିସନପ୍ରତ୍ୟେକ ଭର୍ଟିକାଲ ବିଭାଗ ପାଇଁ ଗୋଟିଏ ଖଣ୍ଡ ଭାବରେ କ୍ୟାବିନେଟର ଉପର ଓ ତଳ ପ୍ୟାନେଲକୁ ବିଭକ୍ତ କରନ୍ତୁ, ଯାହାଫଳରେ ପ୍ରତ୍ୟେକ ଖଣ୍ଡ ନିଜ ବିଭାଗର ଓସାର ଅନୁସରଣ କରିବ ଏବଂ କିନାରା ଖଣ୍ଡଗୁଡ଼ିକ ସ୍ୱୟଂଚାଳିତ ଭାବରେ ପାର୍ଶ୍ୱ ଉପରେ ବିସ୍ତାରିତ ହେବ।
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
ଅଧିକ ଗାଇଡ୍ 2
ସବୁ ଦେଖାନ୍ତୁ (2)
- ସ୍ଥିର ତାକୁ ସହିତ ଆଡଜଷ୍ଟେବଲ ତାକୁ କିପରି ଭିନ୍ନ ଆକାରରେ ତିଆରି ହୁଏଆଡଜଷ୍ଟେବଲ ତାକୁ ସ୍ଥିର ତାକୁ ଠାରୁ ଟିକେ ସରୁ କାହିଁକି ତିଆରି ହୁଏ ଏବଂ ତାକୁ ସ୍ଥିର କରିଦେଲେ ତାହା କିପରି ବଦଳେ ଜାଣନ୍ତୁ।
- Know what applying, removing or replacing a configuration clearsLearn which parts of a partition survive a configuration change and which are removed with it.