パーティション、棚、内部構造
ガイド:104
- 間仕切り、棚、引き出し、扉の追加と設定間仕切りレベルで部品を追加すると、各棚、引き出しセット、扉システムはユニットのその部分にのみ適用されます。
- Change partition dimension instead of translating a shelfAdjust a cabinet by manipulating partition levels, add a shutter system at the partition level, and avoid translating a shelf so the shelf still matches the partition layout.
- Add shelvesで仕切り、シャッターシステムでシャッター仕切りオプションで棚を追加し、Add Shutter Systemオプションでシャッターを追加してから、機構を片開きまたは両開きに設定します。
- 仕切りまたはパネルレベルで棚の後退量を調整する仕切りレベルで棚の後退量を変更するか、パネルレベルで個々の棚の前端を移動して、内部の棚が干渉しないようにします。
- 固定高さを設定してパーティションの分割を制御し、引き出しを追加するキャビネットのパーティションを棚または縦パーティションで分割し、セクションに固定高さを設定してサイズを決めてから、ハンガーロッドまたは棚を追加します。
- 外部扉と引き出しの棚の見込みをゼロに設定します外部扉と引き出しが内部の棚の間隔でずれないよう、棚の見込みをゼロに設定します。
- ワードローブの棚とヒンジの逃げ寸法を5 mmより大きく設定するワードローブの棚とヒンジが干渉しないよう、十分な大きさの棚の逃げ寸法を選択し、ヒンジの位置と照らし合わせて確認します。
- 左右どちらかに縦仕切りと引き出しを追加する縦仕切りをどちら側に配置するかを選択し、縦仕切りと棚を配置したら、各側に引き出しを追加して設定します。
- Add shelvesで間仕切りに棚隠しを設定し、棚の見付け寸法をゼロにしますAdd shelvesを選択した間仕切りスペースに適用し、棚の見付け寸法をゼロに設定すると、前面側に隙間がなくなります。
- パーティションとワードローブ全体の棚の見付けを管理する棚の見付けが入れ子のパーティションにどのように適用されるか、また複数のワードローブに一度に適用する方法を理解します。
- 間仕切りを分割し、子間仕切りを編集する間仕切りレベルで間仕切りを追加して親領域を分割し、各子間仕切りを個別に編集します。
- ワードローブの独立した仕切りを個別に操作する分割されたワードローブの各仕切りを個別に選択すると、1つの区画にだけ扉を取り付けたり、他の区画に影響を与えずに棚を変更したりできます。
- キャビネットゾーン内に仕切りとガラスを追加するキャビネットゾーン内の空きスペースに仕切りを追加して、キャビネット内部を均等に分割します。
- パネルセクションの構法から棚にプロファイルを追加する必要な側のパネルセクションの構法/天板設定から追加して、棚にプロファイルを付けます。
- Add shelvesと掛け収納スペースを仕切り板のクリックで追加ワードローブ内の仕切り板をクリックすると、棚と掛け収納スペースを追加できます。下部の引き出しを考慮してレイアウトを計画してください。
- シャッタースペースに20または25の棚の逃げを適用しますシャッタースペースに20または25の棚の逃げを適用して、引き出しセットを追加する前に棚と仕切りを設定します。
- ワードローブの仕切り、棚、ゾーンをカスタマイズ長い掛け収納や引き出しの構成など、お客様のご要望に合わせて仕切り、棚、ゾーンを配置します。
- 間仕切りを固定高さに設定して高さを変更します間仕切りを固定高さに切り替え、必要な高さを入力すると、その間仕切りを高くしたり低くしたりできます。
- ワードローブ設定で棚板と間仕切り板の端部の表示を設定するキャビネット設定 / ワードローブ設定で、固定棚板、可動棚板、縦間仕切り板の正面/キャーカスの見えるエッジバンドをキャーカス非表示に設定します。
- 棚を面一にするには、棚の見込みと前面の隙間を0に設定します左側のパネルの棚/パネル製作設定で棚の見込みと前面の隙間を編集し、棚を面一にします。
- パーティションと構成に棚の見付けを設定するパーティションの棚の見付けを設定するか、デザインの見付けを維持するか、構成に親の値を使用させます。
- 棚を固定式または可動式に設定し、仕切りをサイズ設定する固定式または可動式の棚を選択し、仕切り自体で仕切りの幅と比率を設定します。
- 区画を理解し、キャビネット内に棚板、パネル、引き出しを追加するInfurnia における区画とは何かを理解し、区画レベルで棚板、縦パネル、引き出しを追加します。
- 棚または間仕切りを削除できない理由棚または間仕切りパネルが削除から保護される場合がある理由と、その対処方法について説明します。
- シャッターと引き出しの間で棚を位置合わせするシャッターと引き出しの間で棚が既定でどこに配置されるか、また延長を調整して位置合わせをどのようにずらすかを学びます。
- 棚を可動式から固定式に変更するパーティション レベルで追加した棚は可動式で始まり、パネル レベルで種類を変更すると固定式にできます。
- 定義済みの間仕切り構成を選択する個々のユニットを配置する代わりに、フィラー側が要件に合う既製のレイアウトを選択してください。
- 棚板と縦仕切りを均等に、または正確な寸法で分割するAdd shelvesと縦仕切りは、既定ではスペースを均等に分割します。スペースを選択して正確な寸法を入力すると、不均等に分割できます。
- デフォルトの棚の見付距離の仕組み棚の見付距離がデフォルトでいくつに設定されているか、またカタログ項目を作成する際にその値を記録する理由を説明します。
- 間仕切りセクションを固定し、正確な高さを設定する間仕切りセクションを固定に切り替え、寸法を指定して正確な間仕切りの高さを設定します。
- 内側棚を固定棚にして、扉材を設定するキャビネットの内側棚を固定棚として設定し、前面から20 mm減らします。
- Front shiftで間仕切りとパターンを壁から前方にオフセットする壁からの前方オフセットを設定すると、間仕切り、垂木、描画パターンを希望する距離に配置できます。
- 構造に棚を追加する前に、縦仕切りを取り外してください縦仕切りがある位置に棚を配置するには、まず仕切りを取り外し、棚を追加してから、縦仕切りのステップに戻ります。
- L字コーナーの仕切りをFront MajorまたはSide Majorに分割するL字コーナーの仕切りを分割し、各セクションに棚を追加して、パネルの寸法を揃えます。
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- 間仕切りセクションが自動サイズ調整されロックされる仕組み自動と固定の間仕切りセクションがどのようにスペースを共有し、なぜ1つのセクションが常に自動調整のままになるかをご覧ください。
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- 保存済みの間仕切り設定を間仕切りに読み込む間仕切りの'Partition Configuration'ドロップダウンを開き、保存済みの設定を適用します。その際、セクションに収まるか確認してください。
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- シェルフ注釈はデフォルトでスケルトンビューに表示されますシェルフ注釈は、調整可能なシェルフ、固定シェルフ、ガラスシェルフをデフォルトでスケルトンビューに示します。LHSプロパティパネルからオフにできます。
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- パーティション レベルと引き出しセットでキャビネットに引き出しを追加するキャビネットのパーティション レベルからキャビネット内に引き出しを挿入し、高さを設定します。必要に応じて下に棚を追加します。
- キャビネット全体または1つの仕切りに扉システムを追加するオープンキャビネット全体、または1つの仕切りだけに扉システムを追加します。
- シャッターを取り外して棚ゾーンを追加し、外部引き出し付きのワードローブを作成する既存のシャッターを取り外して棚ゾーンを追加すると、ワードローブに外部引き出しを作成できます。
- 間仕切り、棚、引き出しシステムを使ってワードローブの内部を構築するAdd shelves、引き出しシステム、構築オプションをワードローブの間仕切り内に配置して、内部を構築します。
- 間仕切りに扉を追加する間仕切りに専用の扉を設定し、片開き扉、両開き扉、跳ね上げ扉から選択できます。
- Add Shutter Systemで単一の仕切りに扉を取り付けるキャビネットの1つの仕切りだけに扉を配置するには、その仕切りを選択し、オプションからAdd Shutter Systemを選びます。
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- 扉をパネルと仕切りに合わせる各辺の減少値を調整して、扉を面一にし、フルハイトを保ち、または仕切りを覆わないようにします。
- 縦仕切りでキャビネットの空間を分割するAdd vertical partitionsで空間を分割し、幅を比率または明示的な値で設定します。
- 引き出しシステムの操作でパーティションに引き出しを追加または削除するパーティションセクションからパーティションにAdd drawersし、引き出しシステムから削除します。同時に棚や縦パーティションも追加できます。
- 作る前に引き出し、扉、間仕切りを計画する内部をカスタマイズする前に、棚の見付け、間仕切りの高さ、扉または引き出しのゾーンを設定します。
- Add a drawer by attaching it to a shelf in the space partitionPlace a drawer inside a compartment by first adding a shelf at the required height and then attaching the drawer to that shelf in the space partition.
- パーティションのクイックアクセスメニューから引き出しセットを追加するパーティションに外部または内部の引き出しを追加し、LHSとRHSの引き出しセットを正しく並べて配置します。
- 縦仕切りを入れて並列の引き出しを追加する引き出しの間に縦仕切りを1枚配置し、引き出しの高さに合わせてサイズを設定すると、並列の引き出しを作成できます。
- 間仕切りに引き戸式および標準の扉機構を適用する正しい間仕切りに扉システムを追加し、その間仕切りで使用できる機構を選択します。
- シャッターを追加する前に、ワードローブを主な仕切りに分割しますまずワードローブを主な仕切りに分割し、次に棚と縦仕切り用に細分化してから、カスタマイズした機構を備えたシャッターシステムを追加します。
- パーティションの削除されたシャッターシステムを復元するシャッターが削除されたパーティションに開き戸シャッターシステムを再び追加するか、None で再度削除します。
- 立面設定でシャッター方向、ユニット、棚の注記の表示を切り替える立面設定でシャッター方向、ユニット注記、棚注記をオンまたはオフにして、表示される立面注記を制御します。
- 違反リストからヒンジと棚の干渉を自動解決する違反チェックで、固定棚と同じ位置に配置されたヒンジなどの干渉が報告された場合は、自動解決オプションを使用してください。
- ヒンジと棚の干渉検出のためにヒンジの寸法を設定するヒンジと棚の干渉を検出できるよう、ヒンジの種類ごとに個別に寸法を設定します。
- ネガティブオフセットで仕切り寸法を調整して、引き出し前板の高さを設定しますネガティブオフセットで引き出し前板の高さを設定すると、表示される仕切りの高さが全体の高さからパネル厚を引いた値になることを確認できます。
- キャビネットパネル自体のレベルで仕上げと棚のオプションを設定するキャビネットパネル自体のレベルを開き、外面と内面の仕上げの取得元を選択し、そのパネルだけのカスタム仕上げを選び、棚の種類と表示/非表示を設定します。
- 選択ツリーを使って、キャビネット、仕切り、扉、パネルのコントロールにアクセスしますキャビネットの部品を選択すると、その上の階層が表示され、必要なコントロールへ直接移動できます。
- 縦仕切りを使って並列の引き出しを手動で作成する棚板と縦仕切りを追加し、両側に引き出しを配置して、並列の引き出しを作成します。
- スケルトンモードでキャビネット内部の仕切りに寸法を記入するスケルトンモードをオンにすると内部の仕切りの寸法を追加できます。手動で仕切りに寸法を記入することもできます。
- 間仕切り高さ、奥行き、棚の見付けを使って間仕切りパネルを配置するカスタムパネルを追加し、回転させ、左右の寸法とX位置・Y位置を設定して、水平な間仕切りパネルを配置します。
- キャビネットまたはパーティションに外寸と内寸のサイズ制限ルールを設定するユニットの制限を外寸に適用するか内部の有効空間に適用するかを選択し、1ユニットずつ、または一括で適用します。
- constructionの既定のpartition設定を使用してキャビネットの背パネルを分割するキャビネットを選択し、そのconstructionの既定のpartitionオプションを使用して、背パネルを分割するか、縦仕切りを追加します。
- Split top and bottom panels 縦仕切りごとキャビネットの天板と底板を縦方向の区画ごとに1枚ずつに分割し、各ピースがその区画の幅に従い、端のピースは側板の上まで自動的に張り出すようにします。
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.