પાર્ટિશન, શેલ્ફ અને આંતરિક ભાગો
માર્ગદર્શિકાઓ: 104
- પાર્ટિશન, શેલ્ફ, ડ્રોઅર અને શટર ઉમેરો અને ગોઠવોઘટકોને પાર્ટિશન સ્તરે ઉમેરો જેથી દરેક શેલ્ફ, ડ્રોઅર સેટ કે શટર સિસ્ટમ ફક્ત યુનિટના તે ભાગને જ લાગુ પડે.
- શેલ્ફનું ભાષાંતર કરવાને બદલે પાર્ટિશનનું માપ બદલોપાર્ટિશન લેવલ સંચાલિત કરીને કેબિનેટ ગોઠવો, પાર્ટિશન લેવલ પર શટર સિસ્ટમ ઉમેરો અને શેલ્ફનું ભાષાંતર કરવાનું ટાળો જેથી શેલ્ફ હજી પણ પાર્ટિશન લેઆઉટ સાથે મેળ ખાય.
- Add shelves દ્વારા પાર્ટિશન અને શટર સિસ્ટમ દ્વારા શટરપાર્ટિશન વિકલ્પ સાથે શેલ્ફ ઉમેરો અને Add Shutter System વિકલ્પ સાથે શટર ઉમેરો, પછી મિકેનિઝમને સિંગલ અથવા ડબલ સ્વિંગ પર સેટ કરો.
- પાર્ટિશન અથવા પેનલ સ્તરે શેલ્ફ રિવીલ સમાયોજિત કરોઆંતરિક શેલ્ફ અથડામણ દૂર કરવા માટે પાર્ટિશન સ્તરે શેલ્ફ રિવીલ બદલો અથવા પેનલ સ્તરે એક શેલ્ફની આગળની ધાર ખસેડો.
- કેબિનેટ પાર્ટિશનની વિભાજન નિયંત્રિત કરવા અને ડ્રોઅર ઉમેરવા માટે નિશ્ચિત ઊંચાઈ સેટ કરોકેબિનેટ પાર્ટિશનને શેલ્ફ અથવા ઊભા પાર્ટિશનથી વિભાજિત કરો, વિભાગ પર નિશ્ચિત ઊંચાઈ સેટ કરીને તેનું માપ નક્કી કરો, પછી હેંગિંગ રોડ અથવા શેલ્ફ ઉમેરો.
- બાહ્ય શટર અને ડ્રોઅર માટે શેલ્ફ રિવીલ શૂન્ય પર સેટ કરોબાહ્ય શટર અને ડ્રોઅર આંતરિક શેલ્ફ સ્પેસિંગથી ઓફસેટ ન થાય તે માટે શેલ્ફ રિવીલ શૂન્ય પર સેટ કરો.
- વોર્ડરોબ શેલ્ફ અને હિન્જ રિવીલ 5 mm થી મોટા સેટ કરોએટલો મોટો શેલ્ફ રિવીલ પસંદ કરો કે વોર્ડરોબ શેલ્ફ અને હિન્જ એકબીજા સાથે અથડાય નહીં, પછી હિન્જની સ્થિતિઓ સામે તેને ચકાસો.
- બંને બાજુએ ઊભી પાર્ટિશન અને ડ્રોઅર ઉમેરોઊભી પાર્ટિશન કઈ બાજુ જશે તે પસંદ કરો, પછી ઊભી પાર્ટિશન અને શેલ્ફ મૂકાઈ જાય એટલે દરેક બાજુએ ડ્રોઅર ઉમેરો અને ગોઠવો.
- પાર્ટિશનમાં Add shelves કરો અને શેલ્ફ રિવીલ શૂન્ય પર સેટ કરોપસંદ કરેલા પાર્ટિશન સ્પેસમાં Add shelves કરો અને શેલ્ફ રિવીલ શૂન્ય પર સેટ કરો જેથી આગળની બાજુથી કોઈ ગેપ ન રહે.
- પાર્ટિશન અને વોર્ડરોબમાં શેલ્ફ રિવીલ મેનેજ કરોશેલ્ફ રિવીલ નેસ્ટેડ પાર્ટિશન સુધી કેવી રીતે પહોંચે છે અને એકસાથે ઘણા વોર્ડરોબમાં તેને કેવી રીતે લાગુ કરવું તે સમજો.
- પાર્ટિશનને વિભાજિત કરો અને ચાઇલ્ડ પાર્ટિશનને સંપાદિત કરોપેરેન્ટ વિસ્તારને વિભાજિત કરવા માટે પાર્ટિશન સ્તરે પાર્ટિશન ઉમેરો અને દરેક ચાઇલ્ડ પાર્ટિશનને અલગથી સંપાદિત કરો.
- વોરડ્રોબમાં અલગ પાર્ટિશન સાથે કામ કરોવિભાજિત વોરડ્રોબના દરેક પાર્ટિશનને અલગથી પસંદ કરો, જેથી તમે ફક્ત એક ઝોનમાં શટર ઉમેરી શકો અથવા બીજાને અસર કર્યા વિના તેના શેલ્ફ બદલી શકો.
- Add partitions and glass inside a cabinet zoneSplit a cabinet interior equally by adding a partition in the empty space inside the cabinet zone.
- પેનલ સેક્શન કન્સ્ટ્રક્શન દ્વારા શેલ્ફમાં પ્રોફાઇલ ઉમેરોજરૂરી બાજુ પર પેનલ સેક્શનની કન્સ્ટ્રક્શન/ટોપ સેટિંગ્સમાંથી ઉમેરીને શેલ્ફ પર પ્રોફાઇલ મૂકો.
- Add shelves and hanging space by clicking on partitionsClick a partition to add shelves and hanging space inside a wardrobe, and plan around drawers at the bottom.
- શટરની જગ્યામાં 20 અથવા 25નું શેલ્ફ રિવીલ લાગુ કરોશટરની જગ્યામાં 20 અથવા 25નું શેલ્ફ રિવીલ લાગુ કરો, જેથી ડ્રોઅર સેટ ઉમેરતા પહેલાં શેલ્ફ અને પાર્ટિશન સેટ થઈ જાય.
- વોરડ્રોબના પાર્ટિશન, શેલ્ફ અને ઝોન કસ્ટમાઇઝ કરોગ્રાહકની જરૂરિયાત મુજબ પાર્ટિશન, શેલ્ફ અને ઝોન ગોઠવો, જેમાં લાંબા હેંગિંગ સ્પેસ અથવા ડ્રોઅર ગોઠવણીનો સમાવેશ થાય છે.
- ઊંચાઈ બદલવા માટે પાર્ટિશનને નિશ્ચિત ઊંચાઈ પર સેટ કરોએક પાર્ટિશનને નિશ્ચિત ઊંચાઈ પર સ્વિચ કરીને અને જરૂરી ઊંચાઈ દાખલ કરીને તેને ઊંચું કે નીચું બનાવો.
- વોરડ્રોબ પ્રેફરન્સમાં શેલ્ફ અને પાર્ટિશન એજ દૃશ્યતા સેટ કરોCabinet Preference / Wardrobe Preference માં ફિક્સ્ડ શેલ્ફ, એડજસ્ટેબલ શેલ્ફ અને વર્ટિકલ પાર્ટિશન પેનલ માટે ફ્રન્ટ/કાર્કાસ વિઝિબલ એજ બેન્ડને કાર્કાસ ઇન્વિઝિબલ પર સેટ કરો.
- ફ્લશ શેલ્ફ માટે શેલ્ફ રિવીલ અને ફ્રન્ટ ગેપ શૂન્ય પર સેટ કરોશેલ્ફ ફ્લશ બેસે તે માટે ડાબી પેનલ પરની શેલ્ફ/પેનલ કન્સ્ટ્રક્શન સેટિંગ્સમાં શેલ્ફ રિવીલ અને ફ્રન્ટ ગેપ એડિટ કરો.
- પાર્ટિશન અને કન્ફિગરેશન પર શેલ્ફ રિવીલ સેટ કરોપાર્ટિશનનું શેલ્ફ રિવીલ સેટ કરો, ડિઝાઇનનું રિવીલ રાખો અથવા કન્ફિગરેશનને પેરન્ટનું મૂલ્ય લેવા દો.
- શેલ્ફને ફિક્સ્ડ કે એડજસ્ટેબલ સેટ કરો અને પાર્ટિશનનું માપ નક્કી કરોફિક્સ્ડ કે એડજસ્ટેબલ શેલ્ફ પસંદ કરો અને પાર્ટિશન પર જ તેની પહોળાઈ અને ગુણોત્તર સેટ કરો.
- પાર્ટિશન સમજો અને કેબિનેટની અંદર શેલ્ફ, પેનલ કે ડ્રોઅર ઉમેરોInfurniaમાં પાર્ટિશન શું છે તે જાણો અને પાર્ટિશન સ્તરે શેલ્ફ, ઊભી પેનલ કે ડ્રોઅર ઉમેરો.
- શેલ્ફ અથવા પાર્ટિશન કેમ ડિલીટ કરી શકાતું નથીશેલ્ફ અથવા પાર્ટિશન પેનલ ડિલીટ થવાથી કેમ સુરક્ષિત હોઈ શકે અને તેનો ઉપાય કેવી રીતે કરવો તે જાણો.
- શટર અને ડ્રોઅર વચ્ચે શેલ્ફને સંરેખિત કરોLearn where a shelf sits by default between a shutter and a drawer and how to shift its alignment by adjusting the extension.
- શેલ્ફને એડજસ્ટેબલમાંથી ફિક્સ્ડમાં બદલોપાર્ટિશન લેવલ પર ઉમેરાયેલી શેલ્ફ શરૂઆતમાં એડજસ્ટેબલ હોય છે, અને પેનલ લેવલ પર તેનો પ્રકાર બદલીને તમે તેને ફિક્સ્ડ બનાવી શકો છો.
- પૂર્વનિર્ધારિત પાર્ટિશન રૂપરેખા પસંદ કરોઅલગ અલગ યુનિટ મૂકવાને બદલે, જેની ફિલર બાજુ જરૂરિયાત સાથે મેળ ખાય એવી તૈયાર ગોઠવણી પસંદ કરો.
- શેલ્ફ અને ઊભી જગ્યાઓને સમાન રીતે અથવા ચોક્કસ માપ પ્રમાણે વિભાજિત કરોAdd shelves અને ઊભી વિભાજકો ડિફોલ્ટ રીતે જગ્યાને સમાન રીતે વિભાજિત કરે છે, અથવા જગ્યા પસંદ કરીને અસમાન રીતે વિભાજિત કરવા માટે ચોક્કસ માપ દાખલ કરો.
- ડિફોલ્ટ શેલ્ફ રિવીલ અંતર કેવી રીતે કામ કરે છેશેલ્ફ રિવીલ અંતર ડિફોલ્ટ રૂપે કેટલું સેટ છે અને કેટલોગ એન્ટ્રીઓ બનાવતી વખતે તમે તેને કેમ નોંધો છો તે જાણો.
- પાર્ટિશન વિભાગને લૉક કરો અને તેની ચોક્કસ ઊંચાઈ સેટ કરોપાર્ટિશન વિભાગને ફિક્સ્ડમાં બદલો, તેને માપ આપો અને ચોક્કસ પાર્ટિશન ઊંચાઈ સેટ કરો.
- અંદરના શેલ્ફને ફિક્સ્ડ બનાવો અને શટરની સામગ્રી સેટ કરોકેબિનેટના અંદરના શેલ્ફને ફિક્સ્ડ પેનલ તરીકે સેટ કરો અને તેને આગળની બાજુથી 20 mm ઘટાડો.
- Front shift વડે પાર્ટિશન અને પેટર્નને દીવાલથી આગળ ખસેડોદીવાલથી આગળનું ઓફસેટ સેટ કરો જેથી પાર્ટિશન, રાફ્ટર અને દોરેલી પેટર્ન તમે ઇચ્છો તે અંતરે રહે.
- સ્ટ્રક્ચરમાં શેલ્ફ ઉમેરતા પહેલાં ઊભી પાર્ટિશન દૂર કરોજ્યાં હાલ ઊભી પાર્ટિશન છે ત્યાં શેલ્ફ મૂકવા માટે પહેલાં પાર્ટિશન દૂર કરો, શેલ્ફ ઉમેરો, પછી ઊભી પાર્ટિશનના સ્ટેપ પર પાછા જાઓ.
- L-કોર્નર પાર્ટિશનને Front Major અથવા Side Major માં વિભાજિત કરોL-કોર્નર પાર્ટિશનને વિભાજિત કરો, દરેક વિભાગમાં શેલ્ફ ઉમેરો અને પેનલના માપ સુસંગત કરો.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- પાર્ટિશન વિભાગો કેવી રીતે ઓટો-સાઇઝ થાય છે અને લૉક થાય છેજુઓ કે ઓટો અને ફિક્સ્ડ પાર્ટિશન વિભાગો કેવી રીતે જગ્યા વહેંચે છે અને એક વિભાગ હંમેશા ઓટો-એડજસ્ટ થતો કેમ રહે છે.
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- પાર્ટિશન પર સાચવેલ પાર્ટિશન રૂપરેખા લોડ કરોપાર્ટિશન પર 'Partition Configuration' ડ્રોપડાઉન ખોલો અને સાચવેલ રૂપરેખા લાગુ કરો, તે વિભાગમાં ફિટ થાય છે તે તપાસો.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- શેલ્ફ એનોટેશન ડિફોલ્ટ રૂપે સ્કેલિટન વ્યૂમાં દેખાય છેશેલ્ફ એનોટેશન ડિફોલ્ટ રૂપે સ્કેલિટન વ્યૂમાં એડજસ્ટેબલ, ફિક્સ્ડ અને ગ્લાસ શેલ્ફને ચિહ્નિત કરે છે, અને તમે LHS પ્રોપર્ટી પેનલમાંથી તેમને બંધ કરી શકો છો.
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- પાર્ટિશન લેવલ અને ડ્રોઅર સેટ દ્વારા કેબિનેટમાં ડ્રોઅર ઉમેરોકેબિનેટના પાર્ટિશન લેવલ પરથી કેબિનેટની અંદર ડ્રોઅર દાખલ કરો, પછી તેની ઊંચાઈઓ સેટ કરો અને જરૂર હોય તો નીચે શેલ્ફ ઉમેરો.
- આખા કેબિનેટમાં અથવા એક જ પાર્ટિશનમાં શટર સિસ્ટમ ઉમેરોખુલ્લા કેબિનેટમાં આખા કેબિનેટ પર અથવા ફક્ત એક પાર્ટિશન પર શટર સિસ્ટમ ઉમેરો.
- શટર દૂર કરીને અને શેલ્ફ ઝોન ઉમેરીને બાહ્ય વોર્ડરોબ ડ્રોઅર્સ બનાવોવોર્ડરોબમાં બાહ્ય ડ્રોઅર્સ બનાવવા માટે હાલના શટર દૂર કરો અને શેલ્ફ ઝોન ઉમેરો.
- પાર્ટિશન, શેલ્ફ અને ડ્રોઅર સિસ્ટમનો ઉપયોગ કરીને વોર્ડરોબની અંદરની રચના બનાવોવોર્ડરોબના પાર્ટિશનની અંદર Add shelves, ડ્રોઅર સિસ્ટમ અને બાંધકામ વિકલ્પો ઉમેરીને તેની અંદરની રચના બનાવો.
- પાર્ટીશનમાં શટર ઉમેરોપાર્ટીશનને તેનું પોતાનું શટર આપો અને સિંગલ શટર, ડબલ સ્વિંગ કે લિફ્ટ-અપ વચ્ચે પસંદગી કરો.
- Add Shutter System દ્વારા એક જ પાર્ટિશન પર શટર ઉમેરોકેબિનેટના ફક્ત એક પાર્ટિશન પર શટર મૂકવા માટે તે પાર્ટિશન પસંદ કરો અને તેના વિકલ્પોમાંથી Add Shutter System પસંદ કરો.
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- શટરને પેનલ અને પાર્ટિશન સાથે સંરેખિત કરોદરેક કિનારાના ઘટાડાને એવી રીતે સમાયોજિત કરો કે શટર સપાટ બેસે, પૂરી ઊંચાઈ જાળવે અથવા પાર્ટિશન ખુલ્લું રહે.
- ઊભા પાર્ટિશન વડે કેબિનેટની જગ્યાઓ વિભાજિત કરોજગ્યાને વિભાજિત કરવા અને તેમની પહોળાઈ ગુણોત્તર કે સ્પષ્ટ મૂલ્યો દ્વારા સેટ કરવા Add vertical partitions.
- ડ્રોઅર સિસ્ટમ નિયંત્રણો દ્વારા પાર્ટિશનમાંથી ડ્રોઅર ઉમેરો અથવા દૂર કરોAdd drawers to a partition from the partition section and remove them from the drawer system, while also adding shelves or vertical partitions.
- બાંધકામ પહેલાં ડ્રોઅર, શટર અને પાર્ટિશનનું પ્લાનિંગ કરોઆંતરિક ભાગોને કસ્ટમાઇઝ કરતા પહેલાં શેલ્ફ રિવીલ, પાર્ટિશનની ઊંચાઈ અને શટર કે ડ્રોઅર ઝોન સેટ કરો.
- સ્પેસ પાર્ટિશનમાં શેલ્ફ સાથે જોડીને ડ્રોઅર ઉમેરોકમ્પાર્ટમેન્ટની અંદર ડ્રોઅર મૂકવા માટે પહેલા જરૂરી ઊંચાઈ પર શેલ્ફ ઉમેરો અને પછી સ્પેસ પાર્ટિશનમાં તે શેલ્ફ સાથે ડ્રોઅર જોડો.
- પાર્ટિશનના ઝડપી ઍક્સેસ મેનૂમાંથી ડ્રોઅર સેટ ઉમેરોપાર્ટિશનમાં બાહ્ય કે આંતરિક ડ્રોઅર ઉમેરો અને LHS તથા RHS ડ્રોઅર સેટને બાજુમાં યોગ્ય રીતે ગોઠવો.
- ઊભા પાર્ટિશન સાથે બાજુ-બાજુમાં ડ્રોઅર્સ ઉમેરોબે ડ્રોઅર્સ વચ્ચે એક ઊભું પાર્ટિશન મૂકીને અને તેને ડ્રોઅરની ઊંચાઈ પ્રમાણે સાઇઝ કરીને બાજુ-બાજુમાં ડ્રોઅર્સ બનાવો.
- પાર્ટિશન પર સ્લાઇડિંગ અને સ્ટાન્ડર્ડ શટર મિકેનિઝમ લાગુ કરોયોગ્ય પાર્ટિશન પર શટર સિસ્ટમ ઉમેરો અને તે પાર્ટિશન માન્ય રાખે તેવું મિકેનિઝમ પસંદ કરો.
- શટર ઉમેરતા પહેલાં વોર્ડરોબને મુખ્ય પાર્ટિશનમાં વિભાજિત કરોપહેલાં વોર્ડરોબને મુખ્ય પાર્ટિશનમાં વિભાજિત કરો, પછી શેલ્ફ અને વર્ટિકલ માટે તેમને ઉપવિભાજિત કરો, અને ત્યારબાદ કસ્ટમાઇઝ્ડ મિકેનિઝમ સાથે શટર સિસ્ટમ ઉમેરો.
- પાર્ટિશન પર દૂર કરેલી શટર સિસ્ટમ પુનઃસ્થાપિત કરોજે પાર્ટિશનની શટર દૂર કરવામાં આવી હતી તેમાં સ્વિંગ શટર સિસ્ટમ ફરી ઉમેરો, અથવા None વડે તેને ફરી દૂર કરો.
- એલિવેશન પસંદગીઓમાં શટર દિશા, યુનિટ અને શેલ્ફ એનોટેશન ટૉગલ કરોએલિવેશન પસંદગીઓમાં શટર દિશાઓ, યુનિટ એનોટેશન અને શેલ્ફ એનોટેશન ચાલુ કે બંધ કરીને કયા એલિવેશન એનોટેશન દેખાય તે નિયંત્રિત કરો.
- ઉલ્લંઘનની યાદીમાંથી હિન્જ અને શેલ્ફના ટકરાવને ઓટો-સોલ્વ કરોજ્યારે ઉલ્લંઘન તપાસ ટકરાવ નોંધે, જેમ કે ફિક્સ્ડ શેલ્ફની સમાન જગ્યાએ મૂકેલી હિન્જ, ત્યારે ઓટો-સોલ્વ વિકલ્પ વાપરો.
- હિન્જ-શેલ્ફ અથડામણ શોધ માટે હિન્જના માપ ગોઠવોદરેક હિન્જ પ્રકાર માટે અલગથી માપ ગોઠવો જેથી હિન્જ-શેલ્ફ અથડામણો શોધી શકાય.
- Set drawer fascia height by adjusting partition dimension with a negative offsetSee how the partition height shown is the full height minus the panel thickness when you set drawer fascia height with a negative offset.
- કેબિનેટ પેનલના પોતાના સ્તર પર ફિનિશ અને શેલ્ફ વિકલ્પો સેટ કરોકેબિનેટ પેનલના પોતાના સ્તરને ખોલો જેથી તેની બાહ્ય અને આંતરિક ફિનિશ ક્યાંથી આવે તે પસંદ કરી શકાય, ફક્ત તે પેનલ માટે કસ્ટમ ફિનિશ પસંદ કરી શકાય, અને શેલ્ફનો પ્રકાર અને દૃશ્યતા સેટ કરી શકાય.
- કેબિનેટ, પાર્ટિશન, શટર અને પેનલ કંટ્રોલ સુધી પહોંચવા માટે સિલેક્શન ટ્રીનો ઉપયોગ કરોતેની ઉપરના સ્તરો જોવા અને તમને જોઈતા કંટ્રોલ પર સીધા જવા માટે કેબિનેટનો કોઈ ભાગ પસંદ કરો.
- ઊભા પાર્ટિશન સાથે બાજુ-બાજુની ડ્રોઅર્સ જાતે બનાવોશેલ્ફ અને ઊભું પાર્ટિશન ઉમેરીને, પછી દરેક બાજુએ એક ડ્રોઅર મૂકીને બાજુ-બાજુની ડ્રોઅર્સ બનાવો.
- સ્કેલિટન મોડ વડે કેબિનેટની આંતરિક પાર્ટિશનના માપાંકન કરોઆંતરિક પાર્ટિશનના માપ ઉમેરવા સ્કેલિટન મોડ ચાલુ કરો, અથવા તેના બદલે પાર્ટિશનને હાથથી માપો.
- પાર્ટિશનની ઊંચાઈ, ઊંડાઈ અને શેલ્ફ રિવીલનો ઉપયોગ કરીને પાર્ટિશન પેનલ મૂકોકસ્ટમ પેનલ ઉમેરીને, તેને ફેરવીને અને તેનું ડાબે-જમણે માપ તથા X અને Y સ્થાન સેટ કરીને આડી પાર્ટિશન પેનલ મૂકો.
- કેબિનેટ અથવા પાર્ટિશન પર બહારની અને અંદરની મર્યાદાઓ માટે સાઇઝિંગ નિયમો સેટ કરોયુનિટની મર્યાદાઓ તેના બહારના પરિમાણો પર લાગુ થાય કે તેની અંદરની ખાલી જગ્યા પર તે પસંદ કરો, અને તેમને એક સમયે એક યુનિટ પર અથવા એકસાથે લાગુ કરો.
- કન્સ્ટ્રક્શન ડિફોલ્ટ પાર્ટિશન સેટિંગ્સનો ઉપયોગ કરીને કેબિનેટની પાછળની પેનલને વિભાજિત કરોએક કેબિનેટ પસંદ કરો અને પાછળની પેનલને વિભાજિત કરવા અથવા ઊભું વિભાજક ઉમેરવા માટે તેના કન્સ્ટ્રક્શન ડિફોલ્ટ પાર્ટિશન વિકલ્પોનો ઉપયોગ કરો.
- Split top and bottom panels દરેક ઊભા પાર્ટિશન દીઠકેબિનેટના ટોપ અને બોટમ પેનલને દરેક ઊભા વિભાગ દીઠ એક ટુકડામાં વિભાજિત કરો, જેથી દરેક ટુકડો તેના વિભાગની પહોળાઈને અનુસરે અને કિનારાના ટુકડા આપમેળે બાજુઓ પર લંબાય.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
વધુ માર્ગદર્શિકાઓ 2
બધું બતાવો (2)
- એડજસ્ટેબલ શેલ્ફ ફિક્સ્ડ શેલ્ફ કરતાં કેવી રીતે જુદી રીતે માપવામાં આવે છેએડજસ્ટેબલ શેલ્ફ ફિક્સ્ડ શેલ્ફ કરતાં થોડી સાંકડી કેમ બનાવવામાં આવે છે અને શેલ્ફને ફિક્સ્ડ કરવામાં આવે ત્યારે તે કેવી રીતે બદલાય છે તે જાણો.
- કન્ફિગરેશન લાગુ કરવાથી, દૂર કરવાથી કે બદલવાથી શું સાફ થાય છે તે જાણોકન્ફિગરેશનમાં ફેરફાર થાય ત્યારે પાર્ટિશનના કયા ભાગો ટકી રહે છે અને કયા તેની સાથે દૂર થાય છે તે જાણો.