Partitions, shelves மற்றும் internals
வழிகாட்டிகள்: 104
- பிரிவுகள், அலமாரிகள், இழுப்பறைகள் மற்றும் கதவுகளைச் சேர்த்து அமைக்கவும்பிரிவு நிலையில் பாகங்களைச் சேர்க்கவும், அதனால் ஒவ்வொரு அலமாரி, இழுப்பறைத் தொகுப்பு அல்லது கதவு அமைப்பும் அந்த யூனிட்டின் அந்தப் பகுதிக்கு மட்டுமே பொருந்தும்.
- Change partition dimension instead of translating a shelfAdjust a cabinet by manipulating partition levels, add a shutter system at the partition level, and avoid translating a shelf so the shelf still matches the partition layout.
- Add shelves மூலம் பிரிப்பு மற்றும் ஷட்டர் அமைப்பு மூலம் ஷட்டர்கள்பிரிப்பு விருப்பத்துடன் ஒரு அலமாரியைச் சேர்க்கவும், Add Shutter System விருப்பத்துடன் ஷட்டர்களைச் சேர்க்கவும், பின்னர் இயங்குமுறையை ஒற்றை அல்லது இரட்டை ஸ்விங் என அமைக்கவும்.
- பிரிவு அல்லது பலகை மட்டத்தில் அலமாரி வெளிப்பாட்டைச் சரிசெய்யவும்மோதலைத் தவிர்க்க உள் அலமாரிகள் பிரிவு மட்டத்தில் அலமாரி வெளிப்பாட்டை மாற்றவும் அல்லது பலகை மட்டத்தில் ஒரு அலமாரியின் முன் விளிம்பை நகர்த்தவும்.
- பிரிவு பிளவைக் கட்டுப்படுத்த நிலையான உயரத்தை அமைத்து, இழுப்பறைகளைச் சேர்க்கவும்ஒரு அலமாரிப் பிரிவை ஒரு தட்டு அல்லது செங்குத்துப் பிரிவால் பிரித்து, ஒரு பகுதியில் நிலையான உயரத்தை அமைத்து அதன் அளவை நிர்ணயித்து, பின்னர் தொங்கும் கம்பு அல்லது தட்டைச் சேர்க்கவும்.
- Set shelf reveal to zero for external shutters and drawersSet the shelf reveal to zero so external shutters and drawers are not offset by the internal shelf spacing.
- 5 mm-ஐ விட பெரிய அலமாரி ஷெல்ஃப் மற்றும் கீல் இடைவெளிகளை அமைக்கவும்அலமாரி ஷெல்ஃப்களும் கீல்களும் மோதிக்கொள்ளாத அளவுக்குப் பெரிய ஷெல்ஃப் இடைவெளியைத் தேர்ந்தெடுத்து, பின்னர் கீல் நிலைகளுடன் அதைச் சரிபார்க்கவும்.
- இரு பக்கங்களிலும் ஒரு செங்குத்து பிரிப்பு மற்றும் இழுப்பறைகளைச் சேர்க்கவும்செங்குத்து பிரிப்பு எந்தப் பக்கத்தில் செல்ல வேண்டும் என்பதைத் தேர்ந்தெடுக்கவும், பின்னர் செங்குத்து மற்றும் அலமாரிகள் இடத்தில் வைக்கப்பட்ட பிறகு ஒவ்வொரு பக்கத்திலும் இழுப்பறைகளைச் சேர்த்து அமைக்கவும்.
- Add shelves in a partition and set shelf reveal to zeroAdd shelves to a selected partition space and set the shelf reveal to zero so there is no gap from the front side.
- பகிர்வுகள் மற்றும் வார்ட்ரோப்கள் முழுவதும் ஷெல்ஃப் ரிவீலை நிர்வகிக்கவும்ஷெல்ஃப் ரிவீல் உள்ளடங்கிய பகிர்வுகளை எவ்வாறு அடைகிறது, பல வார்ட்ரோப்களில் ஒரே நேரத்தில் அதை எவ்வாறு பயன்படுத்துவது என்பதைப் புரிந்து கொள்ளுங்கள்.
- ஒரு பிரிவைப் பிளவாக்கி உட்பிரிவுகளைத் திருத்தவும்மூலப் பகுதியைப் பிளவாக்க, பிரிவு நிலையில் ஒரு பிரிவைச் சேர்க்கவும், பின்னர் ஒவ்வொரு உட்பிரிவையும் தனித்தனியாகத் திருத்தவும்.
- ஒரு அலமாரியில் தனித்தனி பிரிவுகளுடன் வேலை செய்யுங்கள்பிரிக்கப்பட்ட அலமாரியின் ஒவ்வொரு பிரிவையும் தனித்தனியாகத் தேர்ந்தெடுங்கள், அதனால் ஒரு பகுதிக்கு மட்டும் கதவைச் சேர்க்கலாம் அல்லது மற்றவற்றைத் தொடாமல் அதன் அடுக்குகளை மாற்றலாம்.
- Add partitions and glass inside a cabinet zoneSplit a cabinet interior equally by adding a partition in the empty space inside the cabinet zone.
- பேனல் பிரிவு construction மூலம் அலமாரியில் profile சேர்த்தல்தேவையான பக்கத்தில் பேனல் பிரிவின் construction/top அமைப்புகளில் இருந்து சேர்த்து, அலமாரியில் ஒரு profile வைக்கவும்.
- Add shelves மற்றும் தொங்கும் இடத்தை பிரிவுகளில் கிளிக் செய்வதன் மூலம் சேர்க்கலாம்ஒரு அலமாரிக்குள் ஷெல்ஃப்களையும் தொங்கும் இடத்தையும் சேர்க்க ஒரு பிரிவைக் கிளிக் செய்யவும், மேலும் கீழே உள்ள இழுப்பறைகளைச் சுற்றி திட்டமிடவும்.
- ஷட்டர் இடைவெளிக்கு 20 அல்லது 25 அளவு ஷெல்ஃப் ரிவீலைப் பயன்படுத்தவும்ஷட்டர் இடைவெளிக்கு 20 அல்லது 25 அளவு ஷெல்ஃப் ரிவீலைப் பயன்படுத்தவும், இதனால் இழுப்பறைத் தொகுப்பைச் சேர்ப்பதற்கு முன் ஷெல்ஃப்களும் பிரிவுகளும் அமைக்கப்படும்.
- அலமாரிப் பிரிவுகள், அடுக்குகள் மற்றும் பகுதிகளைத் தனிப்பயனாக்குங்கள்நீளமான தொங்கும் இடம் அல்லது இழுப்பறை அமைப்பு உட்பட, வாடிக்கையாளரின் தேவைக்கேற்ப பிரிவுகள், அடுக்குகள் மற்றும் பகுதிகளை அமையுங்கள்.
- ஒரு பிரிப்பை நிலையான உயரத்திற்கு அமைத்து அதன் உயரத்தை மாற்றவும்ஒரு பிரிப்பை நிலையான உயரத்திற்கு மாற்றி, தேவையான உயரத்தை உள்ளிடுவதன் மூலம் அதை உயரமாகவோ குட்டையாகவோ ஆக்கலாம்.
- வார்ட்ரோப் விருப்பத்தேர்வுகளில் அலமாரி மற்றும் பிரிவு விளிம்பு தெரிவுநிலையை அமைக்கவும்Cabinet Preference / Wardrobe Preference இல் நிலையான அலமாரிகள், சரிசெய்யக்கூடிய அலமாரிகள் மற்றும் செங்குத்து பிரிவு பேனல்களுக்கு front/carcass visible edge band ஐ carcass invisible ஆக அமைக்கவும்.
- சமதள அலமாரிகளுக்கு அலமாரி இடைவெளி மற்றும் முன் இடைவெளியை பூஜ்ஜியமாக அமைக்கவும்அலமாரிகள் சமதளமாக அமைய, இடது பக்க panel-இல் உள்ள அலமாரி/panel construction அமைப்புகளில் அலமாரி இடைவெளியையும் முன் இடைவெளியையும் திருத்தவும்.
- Set shelf reveal on partitions and configurationsSet the partition's shelf reveal, keep the design's reveal or let a configuration take the parent's value.
- நிலையான அல்லது சரிசெய்யக்கூடிய அலமாரிகளை அமைத்து பிரிவுகளின் அளவை நிர்ணயிக்கவும்நிலையான அல்லது சரிசெய்யக்கூடிய அலமாரிகளைத் தேர்ந்தெடுத்து, பிரிவின் மீதே பிரிவு அகலங்களையும் விகிதங்களையும் அமைக்கவும்.
- பிரிவுகளைப் புரிந்துகொண்டு, ஒரு கேபினெட்டின் உள்ளே அலமாரிகள், பலகைகள் அல்லது இழுப்பறைகளைச் சேர்க்கவும்Infurnia-வில் பிரிவு என்பது என்ன என்பதை அறிந்து, பிரிவு நிலையில் அலமாரிகள், செங்குத்துப் பலகைகள் அல்லது இழுப்பறைகளைச் சேர்க்கவும்.
- ஒரு அலமாரி அல்லது பிரிப்புத் தகட்டை ஏன் நீக்க முடியாதுஒரு அலமாரி அல்லது பிரிப்புத் தகடு நீக்குவதிலிருந்து ஏன் பாதுகாக்கப்படலாம், அதை எவ்வாறு சுற்றி வேலை செய்வது என்பதை அறிக.
- ஷட்டருக்கும் இழுப்பறைக்கும் இடையே ஒரு அலமாரியைச் சீரமைக்கவும்ஷட்டருக்கும் இழுப்பறைக்கும் இடையே ஒரு அலமாரி இயல்பாக எங்கே அமைகிறது என்பதையும், நீட்டிப்பைச் சரிசெய்து அதன் சீரமைப்பை எவ்வாறு மாற்றுவது என்பதையும் அறிக.
- ஒரு அலமாரியை சரிசெய்யக்கூடியதிலிருந்து நிலையானதாக மாற்றவும்பார்டிஷன் நிலையில் சேர்க்கப்படும் அலமாரிகள் ஆரம்பத்தில் சரிசெய்யக்கூடியவையாக இருக்கும், மேலும் பேனல் நிலையில் அதன் வகையை மாற்றுவதன் மூலம் ஒன்றை நிலையானதாக மாற்றலாம்.
- Choose a predefined partition configurationPick a ready-made layout whose filler side matches the requirement instead of dropping individual units.
- அலமாரிப் பலகையையும் செங்குத்துப் பிரிவுகளையும் சமமாகவோ அல்லது துல்லியமான அளவின்படியோ பிரிக்கவும்Add shelves மற்றும் செங்குத்துப் பிரிவுகள் இயல்பாக இடத்தைச் சமமாகப் பிரிக்கும்; அல்லது ஒரு இடத்தைத் தேர்ந்தெடுத்து, அதைச் சமமற்ற முறையில் பிரிக்கத் துல்லியமான அளவை உள்ளிடவும்.
- இயல்புநிலை ஷெல்ஃப் ரிவீல் தூரம் எவ்வாறு செயல்படுகிறதுஷெல்ஃப் ரிவீல் தூரம் இயல்பாக எவ்வளவு அமைக்கப்பட்டுள்ளது, மற்றும் பட்டியல் உள்ளீடுகளை உருவாக்கும்போது அதை ஏன் குறிப்பிட வேண்டும் என்பதை அறிக.
- Lock a partition section and set its exact heightSwitch a partition section to fixed, give it dimensions and set an exact partition height.
- உள்ளே இருக்கும் அலமாரியை நிலையானதாக்கி, கதவுப் பலகையின் பொருளை அமைக்கவும்ஒரு கேபினட்டின் உள்ளே இருக்கும் அலமாரியை நிலையான பலகையாக அமைத்து, முன்பக்கத்திலிருந்து 20 mm குறைக்கவும்.
- Front shift மூலம் பகிர்வுகள் மற்றும் வடிவங்களை சுவரிலிருந்து முன்னோக்கி இடமாற்றுங்கள்பகிர்வுகள், rafters மற்றும் வரையப்பட்ட வடிவங்கள் நீங்கள் விரும்பும் தூரத்தில் அமையும்படி சுவரிலிருந்து முன்னோக்கி இடமாற்றத்தை அமைக்கவும்.
- கட்டமைப்பில் அலமாரி சேர்ப்பதற்கு முன் செங்குத்து பிரிப்பை அகற்றவும்தற்போது செங்குத்து பிரிப்பு உள்ள இடத்தில் அலமாரி வைக்க, முதலில் பிரிப்பை அகற்றி, அலமாரியைச் சேர்த்து, பின்னர் செங்குத்து பிரிப்பு படிநிலைக்குத் திரும்பவும்.
- L-மூலைப் பிரிப்பை Front Major அல்லது Side Major ஆகப் பிரிக்கவும்L-மூலைப் பிரிப்பைப் பிரித்து, ஒவ்வொரு பகுதிக்கும் அலமாரிகளைச் சேர்த்து, பேனல் அளவுகளைச் சீரமைக்கவும்.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a ready-made internal layout to a cabinet partitionGive a client ready-made internal options by adding a pre-made layout to a cabinet partition, then fine-tune individual panels.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Add fixed shelves at partition level using switch to fixedAdd a fixed shelf at a partition level with a specific height by using 'Switch to Fixed Height' on the partition section rather than on the shelf panel.
- Add hanger rod and pull-out rod via partition-level customizationOpen partition-level customization for a wardrobe section and add a hanger rod and pull-out rod to its internals.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Build the internal layout partition by partitionAdd internals on a partition basis, starting with the element that takes the whole area.
- Control sub-partition ratios explicitlySwitch a partition to auto-adjusted height and turn sub-partition ratio on or off, knowing that clearing ratios needs your consent.
- Delete a parent partition to remove all its child shelves at onceDelete a parent partition and the system removes its top and bottom partitions and their child partitions together.
- Edit cabinet partitions from the bottom so the top partition auto-adjustsEdit the lower cabinet partitions and let the remaining height be calculated automatically for the top partition.
- Find the sizing and shelf limits of an L-corner unitOpen an L-corner unit's Customize > Rules to see its Sizing Rules and Shelf Restriction tabs, where Available Space holds Min and Max depth, width and height.
- பிரிவு பகுதிகள் தானாக அளவிடப்பட்டு பூட்டப்படும் விதம்தானியங்கி மற்றும் நிலையான பிரிவு பகுதிகள் இடத்தை எவ்வாறு பகிர்ந்து கொள்கின்றன, ஒரு பகுதி ஏன் எப்போதும் தானாக சரிசெய்யப்படுவதாகவே இருக்கிறது என்பதைப் பார்க்கவும்.
- Inset a shelf from left and right using construction offsetsMake a shelf shorter than the full carcass width by entering negative left and right construction offsets.
- சேமிக்கப்பட்ட பார்டிஷன் உள்ளமைப்பை ஒரு பார்டிஷனில் ஏற்றவும்ஒரு பார்டிஷனில் 'Partition Configuration' கீழ்தோன்றும் பட்டியலைத் திறந்து, சேமிக்கப்பட்ட உள்ளமைப்பைப் பயன்படுத்தவும்; அது அந்தப் பகுதிக்குப் பொருந்துகிறதா எனச் சரிபார்க்கவும்.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Read a previously set loft height from the top partition's parent partitionRecover a forgotten loft height by opening the top partition of the reference wardrobe and checking its parent partition.
- Remove a shelf from a designSelect the shelf, open its panel-level menu and use the "Delete Shelf" entry, which is greyed out when the shelf is protected by the disallow-deletion setting.
- Set custom partition sizes using fixed width or fixed heightGive a partition its own size by switching it from equal division to a fixed width or fixed height and entering the value you need.
- Set default shelf count and height limits via designer input rulesDefine designer input rules in preferences and settings so cabinet heights are checked against a min and max range automatically.
- Set partition width and height using internal-to-internal measurementSet a wardrobe partition's width or height by its internal-to-internal measurement so you control the clear opening between panels.
- Set shelf reveal and back panel grooving values as presetsConfigure shelf reveal and back panel grooving values as presets in your account so you do not have to change them repeatedly for each design.
- Set sub-partition ratio on the immediate parent to equalise childrenGive child partitions equal heights by setting the sub-partition ratio on their immediate parent partition.
- Set the partition offset distance inside a carcassLearn what the partition offset value means when you add a partition inside a carcass, so you inset the partition by a distance instead of setting its thickness.
- அலமாரி குறிப்புகள் இயல்பாக எலும்புக்கூடு காட்சியில் காட்டப்படும்அலமாரி குறிப்புகள் இயல்பாக எலும்புக்கூடு காட்சியில் சரிசெய்யக்கூடிய, நிலையான மற்றும் கண்ணாடி அலமாரிகளைக் குறிக்கின்றன, மேலும் LHS property panel இல் இருந்து அவற்றை அணைக்கலாம்.
- Shelves and partitions do not accept negative sizing valuesShelves and partitions in the design module cannot be given negative sizing values.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Understand how parent partition numbers are assignedLearn why parent partition numbering in a wardrobe shifts depending on which partition or shelf you click.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.
- Understand what a wardrobe partition isLearn how the empty internal space of a wardrobe carcass is divided into parts and what the blue area represents.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.
- பிரிவு நிலை மற்றும் இழுப்பறை தொகுப்பு மூலம் கேபினட்டில் இழுப்பறையைச் சேர்க்கவும்கேபினட்டின் பிரிவு நிலையிலிருந்து அதன் உள்ளே இழுப்பறையைச் செருகவும், பின்னர் அதன் உயரங்களை அமைத்து, தேவைப்பட்டால் கீழே ஒரு அலமாரியைச் சேர்க்கவும்.
- முழு கேபினட்டுக்கும் அல்லது ஒரு தனிப் பிரிவுக்கும் ஷட்டர் அமைப்பைச் சேர்க்கவும்திறந்த கேபினட்டுக்கு முழுவதற்கும் அல்லது ஒரு பிரிவுக்கு மட்டும் ஷட்டர் அமைப்பைச் சேர்க்கவும்.
- கதவுகளை அகற்றி, அலமாரி மண்டலம் சேர்த்து, அலமாரியில் வெளிப்புற இழுப்பறைகளை உருவாக்குங்கள்அலமாரியில் வெளிப்புற இழுப்பறைகளை உருவாக்க, ஏற்கனவே உள்ள கதவுகளை அகற்றி, அலமாரி மண்டலம் சேர்க்கவும்.
- பிரிவுகள், அலமாரிகள் மற்றும் இழுப்பறை அமைப்புகளைப் பயன்படுத்தி வார்ட்ரோப் உள் அமைப்பை உருவாக்குங்கள்ஒரு வார்ட்ரோப்பின் பிரிவுகளுக்குள் Add shelves, இழுப்பறை அமைப்புகள் மற்றும் கட்டுமான விருப்பங்களைப் பயன்படுத்தி அதன் உள் அமைப்பை உருவாக்குங்கள்.
- பிரிவுக்கு ஒரு ஷட்டர் சேர்க்கவும்ஒரு பிரிவுக்கு அதன் சொந்த ஷட்டரை வழங்கி, ஒற்றை ஷட்டர், இரட்டை திறப்பு அல்லது மேல்நோக்கி திறப்பு ஆகியவற்றில் தேர்ந்தெடுக்கவும்.
- Add Shutter System மூலம் ஒரு தனிப் பிரிப்பில் ஒரு கதவு பலகையைச் சேர்க்கவும்ஒரு கேபினெட்டின் ஒரே ஒரு பிரிப்பில் கதவு பலகையை வைக்க, அந்தப் பிரிப்பைத் தேர்ந்தெடுத்து அதன் விருப்பங்களில் Add Shutter System என்பதைத் தேர்ந்தெடுக்கவும்.
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- கதவுகளை பேனல்கள் மற்றும் பிரிவுகளுடன் சீரமைக்கவும்கதவுகள் சமமாக அமையவும், முழு உயரத்தில் இருக்கவும் அல்லது ஒரு பிரிவை மறைக்காமல் இருக்கவும் ஒவ்வொரு விளிம்பின் குறைப்புகளையும் சரிசெய்யவும்.
- செங்குத்து பிரிப்புகளால் கேபினெட் இடங்களைப் பிரிக்கவும்ஒரு இடத்தைப் பிரித்து, அவற்றின் அகலங்களை விகிதம் அல்லது நேரடி மதிப்புகளால் அமைக்க Add vertical partitions.
- டிராயர் சிஸ்டம் கட்டுப்பாடுகள் மூலம் ஒரு பார்டிஷனில் டிராயர்களைச் சேர்க்கவும் அல்லது நீக்கவும்பார்டிஷன் பிரிவில் இருந்து ஒரு பார்டிஷனுக்கு Add drawers செய்து, டிராயர் சிஸ்டத்தில் இருந்து அவற்றை நீக்கவும், அதே நேரத்தில் ஷெல்ஃப்கள் அல்லது செங்குத்து பார்டிஷன்களையும் சேர்க்கவும்.
- கட்டுவதற்கு முன் இழுப்பறைகள், கதவுகள் மற்றும் பிரிப்புகளைத் திட்டமிடுங்கள்உட்பகுதிகளைத் தனிப்பயனாக்குவதற்கு முன், அலமாரி விளிம்பு, பிரிப்பு உயரங்கள் மற்றும் கதவு அல்லது இழுப்பறை மண்டலங்களை அமைக்கவும்.
- Add a drawer by attaching it to a shelf in the space partitionPlace a drawer inside a compartment by first adding a shelf at the required height and then attaching the drawer to that shelf in the space partition.
- பகிர்வின் விரைவு அணுகல் மெனுவிலிருந்து ஒரு இழுப்பறைத் தொகுப்பைச் சேர்ஒரு பகிர்வில் வெளிப்புற அல்லது உள் இழுப்பறைகளைச் சேர்த்து, LHS மற்றும் RHS இழுப்பறைத் தொகுப்புகளை சரியாக அருகருகே வைக்கவும்.
- செங்குத்து தடுப்புடன் பக்கவாட்டு இழுப்பறைகளைச் சேர்க்கவும்இரண்டு இழுப்பறைகளுக்கு இடையே ஒரு செங்குத்து தடுப்பை வைத்து, அதை இழுப்பறையின் உயரத்திற்கு அளவிடுவதன் மூலம் பக்கவாட்டு இழுப்பறைகளை உருவாக்கவும்.
- Apply sliding and standard shutter mechanisms to partitionsAdd a shutter system on the correct partition and pick a mechanism that partition allows.
- ஷட்டர்களைச் சேர்ப்பதற்கு முன் ஒரு வார்ட்ரோபை முதன்மைப் பிரிவுகளாகப் பிரிக்கவும்முதலில் வார்ட்ரோபை முதன்மைப் பிரிவுகளாகப் பிரிக்கவும், பின்னர் அவற்றை அலமாரிகள் மற்றும் செங்குத்துப் பிரிவுகளுக்காக உட்பிரிவுகளாகப் பிரிக்கவும், அதன் பிறகு தனிப்பயனாக்கப்பட்ட இயக்கவியல்களுடன் ஷட்டர் அமைப்புகளைச் சேர்க்கவும்.
- பிரிப்பில் நீக்கப்பட்ட ஷட்டர் அமைப்பை மீட்டமைக்கவும்ஷட்டர்கள் நீக்கப்பட்ட பிரிப்பில் ஒரு ஸ்விங் ஷட்டர் அமைப்பை மீண்டும் சேர்க்கவும், அல்லது None மூலம் அவற்றை மீண்டும் நீக்கவும்.
- எலிவேஷன் விருப்பத்தேர்வுகளில் ஷட்டர் திசை, யூனிட் மற்றும் ஷெல்ஃப் குறிப்புகளை இயக்கு/முடக்குஎலிவேஷன் விருப்பத்தேர்வுகளில் ஷட்டர் திசைகள், யூனிட் குறிப்புகள் மற்றும் ஷெல்ஃப் குறிப்புகளை இயக்குவதன் மூலம் அல்லது முடக்குவதன் மூலம் எந்த எலிவேஷன் குறிப்புகள் தோன்ற வேண்டும் என்பதைக் கட்டுப்படுத்தவும்.
- மீறல் பட்டியலிலிருந்து கீல் மற்றும் அலமாரி மோதல்களைத் தானாகத் தீர்க்கவும்நிலையான அலமாரியின் அதே நிலையில் ஒரு கீல் வைக்கப்பட்டுள்ளது போன்ற மோதலை மீறல் சரிபார்ப்பு தெரிவிக்கும்போது, தானாகத் தீர் விருப்பத்தைப் பயன்படுத்தவும்.
- Configure hinge dimensions for hinge-shelf collision detectionConfigure the dimensions for every hinge type individually so hinge-shelf collisions can be detected.
- எதிர்மறை ஆஃப்செட் மூலம் பார்டிஷன் அளவைச் சரிசெய்து டிராயர் ஃபேஷியா உயரத்தை அமைக்கவும்எதிர்மறை ஆஃப்செட்டுடன் டிராயர் ஃபேஷியா உயரத்தை அமைக்கும்போது, காட்டப்படும் பார்டிஷன் உயரம் முழு உயரத்திலிருந்து பேனல் தடிமன் கழித்த அளவாக இருப்பதைப் பாருங்கள்.
- கேபினெட் பேனலின் சொந்த நிலையில் ஃபினிஷ்கள் மற்றும் ஷெல்ஃப் விருப்பங்களை அமைக்கவும்ஒரு கேபினெட் பேனலின் சொந்த நிலையைத் திறந்து, அதன் வெளிப்புற மற்றும் உள் ஃபினிஷ்கள் எங்கிருந்து வர வேண்டும் என்பதைத் தேர்ந்தெடுக்கவும், அந்தப் பேனலுக்கு மட்டும் தனிப்பயன் ஃபினிஷ் ஒன்றைத் தேர்ந்தெடுக்கவும், ஷெல்ஃபின் வகை மற்றும் தெரிவுநிலையை அமைக்கவும்.
- கேபினெட், பிரிவுச் சுவர், ஷட்டர் மற்றும் பேனல் கட்டுப்பாடுகளை அடைய தேர்வு மரத்தைப் பயன்படுத்தவும்அதற்கு மேலுள்ள நிலைகளைக் காட்ட ஒரு கேபினெட் பகுதியைத் தேர்ந்தெடுத்து, உங்களுக்குத் தேவையான கட்டுப்பாடுகளுக்கு நேரடியாகச் செல்லுங்கள்.
- செங்குத்து பிரிப்புச் சுவர் மூலம் பக்கவாட்டு இழுப்பறைகளை கைமுறையாக உருவாக்கவும்ஒரு அலமாரித் தட்டு மற்றும் செங்குத்து பிரிப்புச் சுவரைச் சேர்த்து, பின்னர் ஒவ்வொரு பக்கத்திலும் ஒரு இழுப்பறையை வைத்து பக்கவாட்டு இழுப்பறைகளை உருவாக்கவும்.
- எலும்புக்கூடு பயன்முறையில் அமைச்சரக்கின் உட்புறப் பிரிவுகளை அளவிடுங்கள்உட்புறப் பிரிவு அளவுகளைச் சேர்க்க எலும்புக்கூடு பயன்முறையை இயக்குங்கள், அல்லது பிரிவுகளைக் கைமுறையாக அளவிடுங்கள்.
- Position a partition panel using partition height, depth and shelf revealPlace a horizontal partition panel by adding a custom panel, rotating it, and setting its left-right dimension and X and Y positions.
- கேபினெட்டு அல்லது பார்ட்டிஷனில் வெளிப்புற மற்றும் உள் எல்லைகளுக்கான அளவு விதிகளை அமைக்கவும்ஒரு யூனிட்டின் எல்லைகள் அதன் வெளிப்புற அளவுகளுக்குப் பொருந்துமா அல்லது அதன் உள் திறந்தவெளிக்குப் பொருந்துமா என்பதைத் தேர்ந்தெடுத்து, ஒரு நேரத்தில் ஒரு யூனிட்டுக்கு அல்லது மொத்தமாகப் பயன்படுத்தவும்.
- கன்ஸ்ட்ரக்ஷன் இயல்புநிலை பார்டிஷன் அமைப்புகளைப் பயன்படுத்தி கேபினெட்டின் பின்பலகையைப் பிரிக்கவும்ஒரு கேபினெட்டைத் தேர்ந்தெடுத்து, அதன் கன்ஸ்ட்ரக்ஷன் இயல்புநிலை பார்டிஷன் விருப்பங்களைப் பயன்படுத்தி பின்பலகையைப் பிரிக்கவும் அல்லது செங்குத்து பிரிப்பியைச் சேர்க்கவும்.
- Split top and bottom panels ஒவ்வொரு செங்குத்து பிரிப்புக்கும்ஒரு cabinet-இன் மேல் மற்றும் கீழ் panel-களை ஒவ்வொரு செங்குத்துப் பகுதிக்கும் ஒரு துண்டாகப் பிரிக்கவும், இதனால் ஒவ்வொரு துண்டும் அதன் பகுதி அகலத்தைப் பின்பற்றி, ஓரத் துண்டுகள் பக்கங்களின் மேல் தானாக நீளும்.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
மேலும் வழிகாட்டிகள் 2
அனைத்தையும் காட்டு (2)
- சரிசெய்யக்கூடிய அலமாரிகள் நிலையான அலமாரிகளிலிருந்து அளவில் வேறுபடுவது எப்படிசரிசெய்யக்கூடிய அலமாரிகள் நிலையான அலமாரிகளை விட சற்று குறுகலாக ஏன் தயாரிக்கப்படுகின்றன, ஒரு அலமாரி நிலையானதாக அமைக்கப்படும்போது அது எப்படி மாறுகிறது என்பதை அறிக.
- ஒரு கட்டமைப்பைப் பயன்படுத்தும்போது, நீக்கும்போது அல்லது மாற்றும்போது எவை அழிக்கப்படுகின்றன என்பதை அறிககட்டமைப்பு மாற்றத்தின்போது பார்டிஷனின் எந்தப் பகுதிகள் தக்கவைக்கப்படுகின்றன, எவை அதனுடன் நீக்கப்படுகின்றன என்பதை அறிக.