କ୍ୟାବିନେଟ୍ ଏବଂ ମଡ୍ୟୁଲାର୍ ୟୁନିଟ୍
ଗାଇଡ୍: 298
- କ୍ୟାବିନେଟ୍ର ଚଉଡ଼ା, ଗଭୀରତା ଓ ଉଚ୍ଚତାରେ କଣ ଅନ୍ତର୍ଭୁକ୍ତ ନୁହେଁ ତାହା ବୁଝନ୍ତୁଶଟର, କାଉଣ୍ଟରଟପ୍ ଓ ସ୍କର୍ଟିଂ ଭଳି କେଉଁ ଅଂଶଗୁଡ଼ିକ ଦିଆଯାଇଥିବା ମାପରୁ ଅଲଗା ଭାବରେ ଯୋଡ଼ାଯାଏ ତାହା ଜାଣନ୍ତୁ।
- କ୍ୟାବିନେଟ୍ ନିର୍ମାଣ, ସ୍କର୍ଟିଂ, କାଉଣ୍ଟରଟପ୍ ଏବଂ କାର୍କାସ୍ ପ୍ୟାନେଲ୍ କଷ୍ଟମାଇଜ୍ କରନ୍ତୁଏକ ଚୟନିତ କ୍ୟାବିନେଟ୍ର ନିର୍ମାଣ, ସ୍କର୍ଟିଂ, କାଉଣ୍ଟରଟପ୍ ଏବଂ କାର୍କାସ୍ ପ୍ୟାନେଲ୍ ସେଟ୍ କରିବାକୁ କଷ୍ଟମାଇଜ୍ ଟ୍ୟାବ୍ ଖୋଲନ୍ତୁ।
- ଏକ ଉଚ୍ଚ ୟୁନିଟ୍କୁ ତଳ କଠିନ ଏବଂ ଉପର ଗ୍ଲାସ୍ ଶଟରରେ ବିଭକ୍ତ କରନ୍ତୁଉପର ଶଟର ମେକାନିଜିମ୍ ଏବଂ ପ୍ୟାନେଲ୍ କୋର୍ ମେଟେରିଆଲ୍ ସେଟ୍ କରି ତଳ କଠିନ ଶଟର ଏବଂ ଉପର ଗ୍ଲାସ୍ ଶଟର ସହିତ ଏକ ମିଶ୍ରିତ ଉଚ୍ଚ ୟୁନିଟ୍ ତିଆରି କରନ୍ତୁ।
- ୱାର୍ଡ୍ରୋବ ଏବଂ ରୋଷେଇ ଘର କ୍ୟାବିନେଟ ଉଚ୍ଚତା ତୁଳନା କରନ୍ତୁୱାର୍ଡ୍ରୋବ ଉଚ୍ଚତାରେ ସ୍କର୍ଟିଂ କିପରି ଅନ୍ତର୍ଭୁକ୍ତ ହୁଏ ଏବଂ ରୋଷେଇ ଘର କ୍ୟାବିନେଟ ଉଚ୍ଚତା କେବଳ କାର୍କାସ ବକ୍ସ ଅଟେ, ତାହା ଦେଖନ୍ତୁ।
- ଡିଫଲ୍ଟ କ୍ୟାବିନେଟ ନିର୍ମାଣ ପାରାମିଟର ଯାଞ୍ଚ କରନ୍ତୁବ୍ୟାକ ପ୍ୟାନେଲ ଗ୍ରୁଭିଂ, ଶଟର ରିଡକ୍ସନ, ସେଲଫ ରିଭିଲ, ବ୍ୟାକ ପ୍ୟାନେଲ ଅଫସେଟ ଏବଂ ବେସ କ୍ୟାବିନେଟ ଟପ୍ସ ପାଇଁ Infurnia ବ୍ୟବହାର କରୁଥିବା ଡିଫଲ୍ଟ ମୂଲ୍ୟ ଜାଣନ୍ତୁ।
- Create a curved cabinet with a custom panel and panel design editsBuild a curved cabinet by adding a custom panel at cabinet level, sizing it from carcass parameters, and adjusting its offsets so it sits correctly.
- ସେଲ୍ଫ, ଡ୍ରୟର ଏବଂ ହ୍ୟାଙ୍ଗର ରଡ୍ ସହିତ ୱାର୍ଡ୍ରୋବ ଇଣ୍ଟରନାଲ ତିଆରି କରନ୍ତୁୱାର୍ଡ୍ରୋବ ଇଣ୍ଟରନାଲ ତିଆରି କରିବାକୁ ସଠିକ୍ କ୍ରମରେ ଏକ ସେଲ୍ଫ, ଡ୍ରୟର, ଭର୍ଟିକାଲ, ହ୍ୟାଙ୍ଗର ରଡ୍ ଏବଂ ପୁଲ୍-ଆଉଟ୍ ହ୍ୟାଙ୍ଗର ରଡ୍ ଯୋଡ଼ନ୍ତୁ।
- ପାର୍ଟିସନ, ସେଲ୍ଫ ଓ ଡ୍ରୟର ସିଷ୍ଟମ ବ୍ୟବହାର କରି ୱାର୍ଡ୍ରୋବର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ତିଆରି କରନ୍ତୁୱାର୍ଡ୍ରୋବର ପାର୍ଟିସନ ଭିତରେ Add shelves, ଡ୍ରୟର ସିଷ୍ଟମ ଓ ନିର୍ମାଣ ବିକଳ୍ପ ଯୋଡ଼ି ଏହାର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ତିଆରି କରନ୍ତୁ।
- ଥିବା ଶଟରଗୁଡ଼ିକୁ ବଦଳାଇ ଏକ ସାଧାରଣ ୱାର୍ଡରୋବକୁ ସ୍ଲାଇଡିଂ ୱାର୍ଡରୋବରେ ପରିଣତ କରନ୍ତୁଏକ ସାଧାରଣ ୱାର୍ଡରୋବର ଥିବା ଶଟରଗୁଡ଼ିକୁ ଡିଲିଟ କରି ଏବଂ ଦୁଇ-ଦ୍ୱାର କିମ୍ବା ତିନି-ଦ୍ୱାର ସ୍ଲାଇଡିଂ ଭାବରେ କନଫିଗର କରାଯାଇଥିବା ଏକ ନୂଆ ଶଟର ସିଷ୍ଟମ ଯୋଡ଼ି ଏହାକୁ ସ୍ଲାଇଡିଂ ୱାର୍ଡରୋବରେ ପରିଣତ କରନ୍ତୁ।
- ଆଡମିନ ଟ୍ୟାବ ମାଧ୍ୟମରେ କ୍ୟାବିନେଟର କୋର ମ୍ୟାଟେରିଆଲ ବଦଳାନ୍ତୁଆଡମିନ ଟ୍ୟାବରୁ ଏକ କ୍ୟାବିନେଟ କିମ୍ବା କର୍ଣ୍ଣର ୟୁନିଟର କୋର ମ୍ୟାଟେରିଆଲ ଅପଡେଟ କରନ୍ତୁ ଏବଂ ସେଟିଂସ ନିଶ୍ଚିତ କରନ୍ତୁ, ଯାହାଫଳରେ ପରିବର୍ତ୍ତନ ଚୟନିତ ୟୁନିଟରେ ଲାଗୁ ହେବ।
- କ୍ୟାବିନେଟ୍ ସ୍ତରର ଶଟର ଏବଂ କାର୍କାସ୍ ଫିନିଶ୍ ଓ କୋର୍ ସେଟ୍ କରନ୍ତୁପ୍ରପର୍ଟିଜ୍ ପ୍ୟାନେଲରୁ ଶଟର ଏବଂ କାର୍କାସ୍ ଫିନିଶ୍ ଓ କୋର୍ ମ୍ୟାଟେରିଆଲ୍ ବାଛନ୍ତୁ, ଯାହାଫଳରେ ଇନହେରିଟିଂ ଶଟରଗୁଡ଼ିକ କ୍ୟାବିନେଟକୁ ଅନୁସରଣ କରିବେ।
- Change Materials ମାଧ୍ୟମରେ କ୍ୟାବିନେଟ୍ର ଫିନିଶ୍, କୋର୍ ମ୍ୟାଟେରିଆଲ୍ ଏବଂ ଏଜବ୍ୟାଣ୍ଡ୍ ପରିବର୍ତ୍ତନ କରନ୍ତୁChange Materials ବ୍ୟବହାର କରି ପ୍ରଥମେ ଏକ କ୍ୟାବିନେଟ୍ର ଫିନିଶ୍ ଏବଂ କୋର୍ ମ୍ୟାଟେରିଆଲ୍, ତାପରେ ଏହାର ଏଜବ୍ୟାଣ୍ଡ୍ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- Configure cabinet back, top, bottom and side panels in designConfigure each cabinet panel individually so its size, material, edge band, lighting and hardware match the construction you need.
- ଏକାଧିକ ୟୁନିଟ୍ରେ ୩ ମିମି ଫାଙ୍କ ଲଗାନ୍ତୁଏକାଧିକ ୟୁନିଟ୍ରେ ଏକକାଳୀନ ପ୍ରତି ପାଖରେ ୧.୫ ମିମି ହ୍ରାସ ଏବଂ ୩ ମିମି ଶଟର ଫାଙ୍କ ସେଟ୍ କରନ୍ତୁ।
- ୱାଲ୍ ୟୁନିଟ୍ର ଉଚ୍ଚତା କିପରି ଗଣନା କରାଯାଏଟାଇଲିଂ, ସ୍କର୍ଟିଂ, କ୍ୟାବିନେଟ୍ ଏବଂ ଗ୍ରାନାଇଟ୍ ମୋଟେଇର ସମଷ୍ଟି ପ୍ରକୃତରେ କଣ ମାପେ ଏବଂ ଏକ ୱାଲ୍ ୟୁନିଟ୍ର ଚଟାଣରୁ ଉଚ୍ଚତା କେଉଁଠାରୁ ଆସେ ତାହା ଜାଣନ୍ତୁ।
- ପସନ୍ଦ ପରିବର୍ତ୍ତନ ପୂର୍ବରୁ ଯୋଡ଼ାଯାଇଥିବା ୟୁନିଟ୍ଗୁଡ଼ିକୁ ଅପଡେଟ୍ କରନ୍ତୁପୂର୍ବରୁ ରଖାଯାଇଥିବା କ୍ୟାବିନେଟ୍ଗୁଡ଼ିକରେ ଶଟର, କାର୍କାସ୍ ଏବଂ ବ୍ୟାକ୍-ପ୍ୟାନେଲ୍ କୋର୍ ମ୍ୟାଟେରିଆଲ୍ ପୁନଃ ପ୍ରୟୋଗ କରନ୍ତୁ, ଯାହାଫଳରେ ସେଗୁଡ଼ିକ ବର୍ତ୍ତମାନର ପସନ୍ଦ ସହ ମେଳ ଖାଇବ।
- ୱାର୍ଡ୍ରୋବ ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ, ଡ୍ରୟର ସେଟ ଏବଂ ଦର୍ପଣ ଯୋଡ଼ନ୍ତୁଭର୍ଟିକାଲ ପାର୍ଟିଶନ, ସେଲ୍ଫ, ଝୁଲାଇବା ସାମଗ୍ରୀ, ଡ୍ରୟର ସେଟ ଏବଂ ଶଟର ଦର୍ପଣ ଯୋଡ଼ି ୱାର୍ଡ୍ରୋବ ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ସମ୍ପୂର୍ଣ୍ଣ କରନ୍ତୁ।
- କ୍ୟାବିନେଟ ଏବଂ କର୍ଣ୍ଣର ୟୁନିଟରେ ନିର୍ମାଣ ଶୈଳୀ ପ୍ରୟୋଗ କରନ୍ତୁଜାଣନ୍ତୁ ଯେ ନିର୍ମାଣ ଶୈଳୀ କ୍ୟାବିନେଟ ଏବଂ କର୍ଣ୍ଣର ୟୁନିଟ ପାଇଁ ଅଲଗା ଭାବରେ ନିର୍ଧାରିତ ହୋଇଥାଏ।
- ସିଷ୍ଟମ ଏଡିଟ କରି ଏକ ଶଟର କ୍ୟାବିନେଟକୁ ଡ୍ରୟର ଓ ବାସ୍କେଟରେ ପରିଣତ କରନ୍ତୁଶଟର କାଢ଼ି ସିଷ୍ଟମ କଷ୍ଟମାଇଜ କରି ଏକ ଏକକ-ଶଟର କ୍ୟାବିନେଟକୁ ୱିକର ବାସ୍କେଟ ଓ ଡ୍ରୟର ୟୁନିଟରେ ପରିଣତ କରନ୍ତୁ, ତାପରେ ଡ୍ରୟର ଓ ପାର୍ଟିସନ ଯୋଡ଼ନ୍ତୁ, କାଢ଼ନ୍ତୁ ଓ ସମାୟୋଜିତ କରନ୍ତୁ।
- ଲଫ୍ଟ ଫ୍ରେମ ଏବଂ ବକ୍ସ କମ୍ପୋନେଣ୍ଟ ବ୍ୟବହାର କରି ୱାର୍ଡ୍ରୋବ ଲଫ୍ଟ ତିଆରି କରନ୍ତୁଶଟର ସିଷ୍ଟମ କନଷ୍ଟ୍ରକ୍ସନ ମାଧ୍ୟମରେ ଖୋଲିବା ଦିଶା ସମାୟୋଜିତ କରନ୍ତୁ ଏବଂ ଖୋଲିବା ଦିଶା ଟୋଗଲ କରନ୍ତୁ।
- ଅନେକ କ୍ୟାବିନେଟରେ ଅନୁପସ୍ଥିତ ଡୋଏଲ, ମିନିଫିକ୍ସ କିମ୍ବା PVC ଗୋଡ ଠିକ କରନ୍ତୁଯଦି ଅନେକ କ୍ୟାବିନେଟରେ ଡୋଏଲ, ମିନିଫିକ୍ସ କିମ୍ବା PVC ଗୋଡ ଅନୁପସ୍ଥିତ ଅଛି, ତେବେ ପ୍ରୟୋଗ ହୋଇଥିବା ନିର୍ମାଣ ଶୈଳୀରେ Remove All Connectors ଚାଲୁ ଅଛି କି ନାହିଁ ଯାଞ୍ଚ କରନ୍ତୁ।
- ଏକାଧିକ କ୍ୟାବିନେଟ୍ ର ଏଲିଭେସନ୍ ତିଆରି କରନ୍ତୁ ଏବଂ ଫିନିଶ୍ ଏକାସାଙ୍ଗରେ ବଦଳାନ୍ତୁଏକାଧିକ କ୍ୟାବିନେଟ୍ ଅନ୍ତର୍ଭୁକ୍ତ କରୁଥିବା ଏଲିଭେସନ୍ ତିଆରି କରିବାକୁ ଏକ କ୍ୟାବିନେଟ୍ ର 2D Drawings ଖୋଲନ୍ତୁ, ତାପରେ ସେମାନଙ୍କର ମ୍ୟାଟେରିଆଲ୍ ଏବଂ ଫିନିଶ୍ ଏକ କାର୍ଯ୍ୟରେ ବଦଳାଇବାକୁ କ୍ୟାବିନେଟ୍ଗୁଡ଼ିକୁ ଗ୍ରୁପ୍-ସିଲେକ୍ଟ କରନ୍ତୁ।
- କ୍ୟାବିନେଟ ଗଠନ କିପରି ଶଟର, ଡ୍ରୟର ଏବଂ ଆକ୍ସେସରୀରେ ବିଭକ୍ତ ହୁଏଏକ କ୍ୟାବିନେଟର ଗଠନ କିପରି ଶଟର, ଡ୍ରୟର ଏବଂ ଆକ୍ସେସରୀରେ ବିଭକ୍ତ ହୁଏ ଏବଂ ଶଟର ଓ ଡ୍ରୟର ସିଷ୍ଟମ ଅଲଗା ଭାବରେ କିପରି କନଫିଗର ହୁଏ ତାହା ଜାଣନ୍ତୁ।
- ରୋଷେଇଘର ଉଚ୍ଚ ୟୁନିଟର ଉଚ୍ଚତା ଓ ଗଭୀରତା କିପରି ମାପ କରାଯାଏରୋଷେଇଘର ଉଚ୍ଚ ୟୁନିଟର ଉଚ୍ଚତା ଓ ଗଭୀରତା ମାପିବା ସମୟରେ କେଉଁ ଅଂଶଗୁଡ଼ିକ ବାଦ ଦିଆଯାଏ ତାହା ଜାଣନ୍ତୁ।
- ୱାର୍ଡ୍ରୋବର ସାଇଡ୍ ପ୍ୟାନେଲ କିପରି ଫ୍ଲୋର ପର୍ଯ୍ୟନ୍ତ ପହଞ୍ଚେୱାର୍ଡ୍ରୋବର ସାଇଡ୍ ପ୍ୟାନେଲ କିପରି ପୂର୍ଣ୍ଣ ଲମ୍ବରେ ଫ୍ଲୋର ପର୍ଯ୍ୟନ୍ତ ଯାଏ ଏବଂ ଆଗ ସ୍କର୍ଟିଂ ପାଇଁ କାହିଁକି ଏକ କଟ୍ଆଉଟ କରାଯାଏ, ତାହା ଜାଣନ୍ତୁ।
- ଫିନିଶ୍ ଏବଂ ଏଜ୍-ବ୍ୟାଣ୍ଡ ସେଟିଂସ୍ ଖୋଲିବା ପାଇଁ ଏକ କ୍ୟାବିନେଟ୍ ଚୟନ କରନ୍ତୁଏହାର ପ୍ରପର୍ଟିଜ୍ ପ୍ୟାନେଲ୍ ଖୋଲିବା ପାଇଁ ଏକ କ୍ୟାବିନେଟ୍ ଚୟନ କରନ୍ତୁ, ତାପରେ Materials ଅଧୀନରେ ଏହାର ଫିନିଶ୍, ବ୍ୟାକ୍ ପ୍ୟାନେଲ୍ କୋର୍ ଏବଂ ଏଜ୍ ବ୍ୟାଣ୍ଡ ସେଟ୍ କରନ୍ତୁ।
- ଭର୍ଟିକାଲ ପାର୍ଟିସନ ସହିତ କ୍ୟାବିନେଟ ସ୍ଥାନକୁ ବିଭାଜିତ କରନ୍ତୁଏକ ସ୍ଥାନକୁ ବିଭାଜିତ କରିବା ଏବଂ ସେମାନଙ୍କ ଓସାରକୁ ଅନୁପାତ କିମ୍ବା ସ୍ପଷ୍ଟ ମୂଲ୍ୟ ଦ୍ୱାରା ସେଟ୍ କରିବା ପାଇଁ Add vertical partitions।
- କ୍ୟାବିନେଟକୁ ପ୍ରୋଫାଇଲ ହ୍ୟାଣ୍ଡେଲ କିମ୍ବା ହ୍ୟାଣ୍ଡେଲବିହୀନ ଦ୍ୱାରକୁ ବଦଳାନ୍ତୁଡିଜାଇନ ସମୟରେ ସିଧାସଳଖ କ୍ୟାବିନେଟକୁ ସାଧାରଣ ହ୍ୟାଣ୍ଡେଲରୁ ପ୍ରୋଫାଇଲ ହ୍ୟାଣ୍ଡେଲ କିମ୍ବା ହ୍ୟାଣ୍ଡେଲବିହୀନ ଦ୍ୱାରକୁ ବଦଳାନ୍ତୁ, ଅଲଗା କାଟାଲଗ କିମ୍ବା କନଷ୍ଟ୍ରକସନ ସେଟଅପ ଆବଶ୍ୟକ ନାହିଁ।
- ଗୋଟିଏ ୟୁନିଟ୍ ରଖି କପି ଓ ଆଲାଇନ୍ କରି ଏକ ରୋଷେଇଘର ଲେଆଉଟ୍ ତିଆରି କରନ୍ତୁଗୋଟିଏ ୱାଲ୍ ୟୁନିଟ୍ କିମ୍ବା ଲଫ୍ଟକୁ ସଠିକ୍ ସ୍ଥାନରେ ରଖନ୍ତୁ, ତାପରେ ବାକି ୟୁନିଟ୍ଗୁଡ଼ିକୁ କପି ଓ ଆଲାଇନ୍ କରି ଆପଣଙ୍କ ରୋଷେଇଘର ଲେଆଉଟ୍ ତିଆରି କରନ୍ତୁ।
- Manually change wardrobe construction and turn off back skirtingCustomize a wardrobe by manually changing its construction and turning off the back skirting for a sliding wardrobe.
- ଫର୍ଣ୍ଣିଚର ମଡେଲ ଲାଇବ୍ରେରୀରୁ ଡ୍ରେସର, ଟିଭି ଏବଂ ଉଚ୍ଚ ୟୁନିଟ ରଖନ୍ତୁପୂର୍ବରୁ ତିଆରି ମଡେଲ କିମ୍ବା ଆପଣଙ୍କ ନିଜ ଡିଜାଇନ ବ୍ୟବହାର କରି ଡ୍ରେସର, ଟିଭି ଏବଂ ଉଚ୍ଚ ୟୁନିଟ ରଖନ୍ତୁ, ତାପରେ ସେଗୁଡ଼ିକୁ ଫିଟ ହେବା ପାଇଁ ସଜାଡ଼ନ୍ତୁ।
- କ୍ୟାବିନେଟ୍ ରଖିବା ପୂର୍ବରୁ କିମ୍ବା ପରେ ଏହାକୁ ଘୂରାନ୍ତୁfurnish ଟୁଲରୁ ଏକ କ୍ୟାବିନେଟ୍ ରଖନ୍ତୁ ଏବଂ ରଖିବା ପୂର୍ବରୁ space bar ସହିତ ଏହାକୁ ଘୂରାନ୍ତୁ କିମ୍ବା ପରେ rotate ବିକଳ୍ପ ସହିତ ଘୂରାନ୍ତୁ।
- ପ୍ରତ୍ୟେକ ପ୍ରୋଜେକ୍ଟ ପାଇଁ କ୍ୟାବିନେଟ୍ ଏବଂ ୱାର୍ଡ୍ରୋବ ପସନ୍ଦ ସେଟ୍ କରନ୍ତୁଏକ ପ୍ରୋଜେକ୍ଟକୁ ଆକାଉଣ୍ଟ-ବ୍ୟାପୀ ପସନ୍ଦ ବଦଳରେ ନିଜର କ୍ୟାବିନେଟ୍ ଏବଂ ୱାର୍ଡ୍ରୋବ ମ୍ୟାଟେରିଆଲ୍ ଡିଫଲ୍ଟ ଦେବା ପାଇଁ ଡିଜାଇନ୍ର ପସନ୍ଦ ମେନୁ ଖୋଲନ୍ତୁ।
- କେନ୍ଦ୍ର କ୍ୟାବିନେଟ୍ ପାର୍ଶ୍ୱ ପ୍ୟାନେଲ୍ ନିର୍ମାଣ ବୁଝନ୍ତୁକେନ୍ଦ୍ର କ୍ୟାବିନେଟ୍ ପାର୍ଶ୍ୱ ପ୍ୟାନେଲ୍ ଡିଫଲ୍ଟ ଭାବରେ କିପରି ନିର୍ମିତ ହୁଏ ଏବଂ ବାମ, ଡାହାଣ, ଉପର ଓ ତଳ ପ୍ୟାନେଲ୍ କିପରି ଏକତ୍ର ଫିଟ୍ ହୁଏ ଶିଖନ୍ତୁ।
- ଦ୍ରୁତ ପ୍ରବେଶ ପ୍ୟାନେଲରେ ରୋଷେଇଘର କ୍ୟାବିନେଟ ଉଚ୍ଚତା ବୁଝନ୍ତୁରୋଷେଇଘର କ୍ୟାବିନେଟର ଦ୍ରୁତ ପ୍ରବେଶ ପ୍ୟାନେଲରେ ଦେଖାଯାଉଥିବା ଉଚ୍ଚତା କେଉଁଟି ମାପେ ଏବଂ ଏହା ସମ୍ପାଦନ କଲେ କଣ ବଦଳେ ଜାଣନ୍ତୁ।
- କାଟାଲଗରୁ ୟୁନିଟ ଚୟନ କରି ଏବଂ ଡ୍ରପ କରି କ୍ୟାବିନେଟ ଯୋଡ଼ନ୍ତୁକାଟାଲଗ ଖୋଲନ୍ତୁ, ଏକ ବେସ ୟୁନିଟ ବର୍ଗ ଚୟନ କରନ୍ତୁ ଏବଂ ଆବଶ୍ୟକ ପ୍ରସ୍ଥର ଏକ କ୍ୟାବିନେଟ ଚୟନ କରନ୍ତୁ, ତାପରେ ଆପଣଙ୍କ ଡିଜାଇନ ତିଆରି କରିବା ପାଇଁ ଏହାକୁ ଲେଆଉଟରେ ଡ୍ରପ କରନ୍ତୁ।
- Add cabinets using FR enter and room templatesOpen the cabinet library with FR and enter, then place, rotate, resize and duplicate base or wall units.
- ଏକ ଖାଲି କାର୍କାସ୍ରୁ ନିଜେ ୱାର୍ଡ୍ରୋବ୍ର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ତିଆରି କରନ୍ତୁକାଟାଲଗ୍ରୁ ଏକ ୱାର୍ଡ୍ରୋବ୍ ବିକଳ୍ପ ରଖନ୍ତୁ ଏବଂ ସେଲ୍ଫ ଓ ଭର୍ଟିକାଲ୍ ପ୍ୟାନେଲ୍ କିମ୍ବା ଏକ ପ୍ରସ୍ତୁତ ପାର୍ଟିଶନ୍ ବିନ୍ୟାସ ବ୍ୟବହାର କରି ଏହାର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ନିଜେ ତିଆରି କରନ୍ତୁ।
- କ୍ୟାବିନେଟ ଆକାର ପରିବର୍ତ୍ତନ କରନ୍ତୁ ଏବଂ ମେଟେରିଆଲ ବର୍ଗଗୁଡ଼ିକ ବୁଝନ୍ତୁପ୍ରପର୍ଟିଜ ପ୍ୟାନେଲରୁ ଏକ କ୍ୟାବିନେଟର ଆକାର ପରିବର୍ତ୍ତନ କରନ୍ତୁ ଏବଂ ଏହାର ମେଟେରିଆଲଗୁଡ଼ିକ କିପରି ଗ୍ରୁପ ହୋଇଛି ଜାଣନ୍ତୁ।
- ଶଟର ଯୋଡ଼ିବା ପୂର୍ବରୁ ୱାର୍ଡ୍ରୋବକୁ ମୁଖ୍ୟ ପାର୍ଟିସନରେ ବିଭକ୍ତ କରନ୍ତୁପ୍ରଥମେ ୱାର୍ଡ୍ରୋବକୁ ମୁଖ୍ୟ ପାର୍ଟିସନରେ ବିଭକ୍ତ କରନ୍ତୁ, ତାପରେ ସେଲ୍ଫ ଓ ଭର୍ଟିକାଲ ପାଇଁ ସେଗୁଡ଼ିକୁ ଉପବିଭାଗ କରନ୍ତୁ, ଏବଂ ପରେ କଷ୍ଟମାଇଜ୍ କରାଯାଇଥିବା ମେକାନିଜିମ୍ ସହିତ ଶଟର ସିଷ୍ଟମ ଯୋଡ଼ନ୍ତୁ।
- କ୍ୟାବିନେଟ ମଡ୍ୟୁଲର ପ୍ରସ୍ଥ, ଉଚ୍ଚତା ଏବଂ ଗଭୀରତା ସୀମା କିପରି ଲାଗୁ ହୁଏପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ ମଡ୍ୟୁଲର ସାଇଜିଂ ନିୟମ କିପରି ସର୍ବନିମ୍ନ ଓ ସର୍ବାଧିକ ପ୍ରସ୍ଥ, ଉଚ୍ଚତା ଏବଂ ଗଭୀରତା ନିର୍ଦ୍ଧାରଣ କରେ ଏବଂ ଡିଜାଇନରମାନଙ୍କୁ ସେହି ସୀମା ଭିତରେ ରଖେ, ତାହା ଜାଣନ୍ତୁ।
- ମାନକ ବେସ ୟୁନିଟ ଆକାର କିପରି କାମ କରେରୋଷେଇ ମଡେଲିଂରେ ବ୍ୟବହୃତ ମାନକ ବେସ ୟୁନିଟ ଗଭୀରତା ଓ ଉଚ୍ଚତା ଜାଣନ୍ତୁ ଏବଂ ସେହି ମାପଗୁଡ଼ିକ କଣ ଛାଡ଼ି ଦିଏ ତାହା ଜାଣନ୍ତୁ।
- ଫ୍ଲୋର ପ୍ଲାନରେ ରୋଷେଇ ଘରର ୟୁନିଟଗୁଡ଼ିକୁ ଘୁଞ୍ଚାନ୍ତୁ ଏବଂ ଘୂର୍ଣ୍ଣନ କରନ୍ତୁMV କମାଣ୍ଡ କିମ୍ବା move ଟୁଲ ସହିତ ୟୁନିଟଗୁଡ଼ିକୁ ଘୁଞ୍ଚାଇ ଏବଂ ସ୍ପେସବାର ସହିତ ସେଗୁଡ଼ିକୁ ଘୂର୍ଣ୍ଣନ କରି କାନ୍ଥ ଉପରେ ରୋଷେଇ ଘରର ୟୁନିଟଗୁଡ଼ିକୁ ସଠିକ୍ ଭାବରେ ରଖନ୍ତୁ।
- 2D ଏବଂ 3D ଦୃଶ୍ୟରେ କ୍ୟାବିନେଟ୍ ସ୍ଥାନାନ୍ତର କରନ୍ତୁଏକ କ୍ୟାବିନେଟ୍ ଉପରକୁ ଓ ତଳକୁ ସ୍ଥାନାନ୍ତର କରନ୍ତୁ ଏବଂ 2D ଦୃଶ୍ୟ କିମ୍ବା 3D ଦୃଶ୍ୟରେ ଏହାକୁ ପୁନଃସ୍ଥାପିତ କରନ୍ତୁ।
- ସଠିକ୍ ସ୍ଥାନ ନିର୍ଣ୍ଣୟ ପାଇଁ ଫ୍ଲୋର ପ୍ଲାନରେ କ୍ୟାବିନେଟ୍ ରଖନ୍ତୁକ୍ୟାବିନେଟ୍ଗୁଡ଼ିକୁ ଫ୍ଲୋର ପ୍ଲାନରେ ରଖନ୍ତୁ ଯାହାଫଳରେ ସେମାନେ ପାଖ କ୍ୟାବିନେଟ୍ସହ ସ୍ନାପ୍ ହେବେ, ଏବଂ ସ୍ପେସ୍ ବାର୍ ସହାୟତାରେ ସେମାନଙ୍କୁ ଘୂର୍ଣ୍ଣନ କରନ୍ତୁ।
- ଏକ କ୍ୟାବିନେଟକୁ ଅନ୍ୟ ୟୁନିଟ୍ ପ୍ରକାରରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁଅପ୍ରୟୋଜନୀୟ ପ୍ୟାନେଲ ବନ୍ଦ କରନ୍ତୁ, ଆକାର ସେଟ୍ କରନ୍ତୁ ଏବଂ କ୍ୟାବିନେଟକୁ ଏକ ଭିନ୍ନ ପ୍ରକାରରେ ପରିଣତ କରିବା ପାଇଁ ଆଭ୍ୟନ୍ତରୀଣ ବିଭାଜନ ଯୋଡ଼ନ୍ତୁ।
- ଉଚ୍ଚ ୟୁନିଟ୍ରେ ଖୋଲିବା ଦିଶା ଟୋଗଲ୍ କରନ୍ତୁ ଏବଂ ଲିଫ୍ଟ-ଅପ୍ ମେକାନିଜିମ୍ ସେଟ୍ କରନ୍ତୁଏକ ଉଚ୍ଚ ୟୁନିଟ୍ର ଖୋଲିବା ଦିଶା ଟୋଗଲ୍ କରନ୍ତୁ ଏବଂ ଏହାର ମେକାନିଜିମ୍କୁ ଏକକ ଲିଫ୍ଟ-ଅପ୍ ବିନ୍ୟାସରେ ସେଟ୍ କରନ୍ତୁ।
- Pricing Quotation ରେ କ୍ୟାବିନେଟ୍ ଏବଂ ଡ୍ରୟର ଚ୍ୟାନେଲ୍ କିପରି ଦେଖାଯାଏ ତାହା ବୁଝନ୍ତୁBase Unit, Wall Unit ଏବଂ Tall Unit କ୍ୟାବିନେଟ୍ଗୁଡ଼ିକ କିପରି ଲେବଲ୍ ହୁଏ ଓ ତାଲିକାଭୁକ୍ତ ହୁଏ, ଏବଂ କୋଟେସନ୍ରେ ଏକ ଡ୍ରୟରର ଚ୍ୟାନେଲ୍ କିପରି ଗଣନା ଓ ମୂଲ୍ୟ ନିର୍ଣ୍ଣୟ ହୁଏ ତାହା ଜାଣନ୍ତୁ।
- Use pre-made internal configurations that auto-resize to the wardrobeAdd internal wardrobe configurations through the customize option and adjust one shelf height to let the remaining shelves resize automatically.
- କାର୍କାସ୍ ପ୍ୟାନେଲ୍ ନିର୍ମାଣ ସହିତ ୱାର୍ଡ୍ରୋବ୍ ଗଠନ ବିନ୍ୟାସ କରନ୍ତୁୱାର୍ଡ୍ରୋବ୍ ଗଠନ ବିନ୍ୟାସ କରିବା ଏବଂ ଭର୍ଟିକାଲ୍ ପ୍ୟାନେଲ୍ ଓ ଡ୍ରୟର ଭଳି ଆଭ୍ୟନ୍ତରୀଣ ଓ ବାହ୍ୟ ଉପାଦାନ ଯୋଡ଼ିବା ପାଇଁ Carcass panel construction ବିଭାଗ ବ୍ୟବହାର କରନ୍ତୁ।
- Align Dimension ସହିତ ଏକ ଏଲିଭେସନରେ ମାପ ଏକକଏକ ଏଲିଭେସନରେ ଏକ ୟୁନିଟର କାର୍କାସ୍, ପାର୍ଟିସନ୍ ଏବଂ ସଟରକୁ ସେମାନଙ୍କ ଧାର ଦ୍ୱାରା ଏବଂ ସମାନ ଦିଗରେ ଚେନ୍ ମାପ ଦ୍ୱାରା ବାଛନ୍ତୁ।
- ପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ୍ ପ୍ରକାର ପାଇଁ ଦୃଶ୍ୟ-ନିର୍ଦ୍ଦିଷ୍ଟ ସ୍ତର ବ୍ୟବହାର କରି ଅଲଗା ଫ୍ଲୋର ପ୍ଲାନ୍ ତିଆରି କରନ୍ତୁପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ୍ ପ୍ରକାରକୁ ନିଜର ପ୍ଲାନ୍ ଦିଅନ୍ତୁ, ଯାହାଫଳରେ ବେସ୍, ୱାଲ୍ ଏବଂ ଲଫ୍ଟ ୟୁନିଟ୍ ଅଲଗା ଭାବରେ ପ୍ରିଣ୍ଟ ହେବ।
- ୱାଲ୍ କ୍ୟାବିନେଟ୍ ଝୁଲାଇବା ବ୍ରାକେଟ୍ ସହିତ ୱାଲ୍ କ୍ୟାବିନେଟ୍ ଝୁଲାନ୍ତୁୱାଲ୍ କ୍ୟାବିନେଟ୍ ଝୁଲାଇବା ପାଇଁ ହାର୍ଡୱେର୍ ୱେୟାରହାଉସ୍ରୁ ୱାଲ୍ କ୍ୟାବିନେଟ୍ ଝୁଲାଇବା ବ୍ରାକେଟ୍ ବ୍ୟବହାର କରନ୍ତୁ।
- ୱାର୍ଡ୍ରୋବ ନିର୍ମାଣ ଶୈଳୀ କିପରି କାର୍କାସ୍ ପାରାମିଟରଗୁଡ଼ିକୁ ସଂରକ୍ଷଣ କରେଏକ ୱାର୍ଡ୍ରୋବ ୟୁନିଟ୍ ନିର୍ମାଣ ଶୈଳୀ କେଉଁ କାର୍କାସ୍ ପାରାମିଟରଗୁଡ଼ିକୁ ଧାରଣ କରେ ଏବଂ ଶୈଳୀ ଅପଡେଟ୍ କଲେ ସେଗୁଡ଼ିକ ୱାର୍ଡ୍ରୋବରେ କିପରି ପ୍ରଯୁଜ୍ୟ ହୁଏ ତାହା ଜାଣନ୍ତୁ।
- କ୍ୟାବିନେଟ୍ର ତଳ ପ୍ୟାନେଲ୍କୁ କାର୍କାସ୍ ପ୍ୟାନେଲ୍ ମୋଟେଇ ବ୍ୟବହାର କରି ଭିତରକୁ ଅଫସେଟ୍ କରନ୍ତୁତଳ ପ୍ୟାନେଲ୍କୁ ଏକ ପ୍ୟାନେଲ୍ ମୋଟେଇ ଉପରକୁ ଉଠାନ୍ତୁ, ଯାହାଫଳରେ ଏହା ପାର୍ଶ୍ୱ ପ୍ୟାନେଲ୍ଗୁଡ଼ିକର ତଳେ ନୁହେଁ, କାର୍କାସ୍ ଭିତରେ ରହିବ।
- ଫର୍ନିସ୍ ଏବଂ ମୁଭ୍ ଟୁଲ୍ ମାଧ୍ୟମରେ ଲଫ୍ଟ ୟୁନିଟ୍ ରଖନ୍ତୁ ଏବଂ ସ୍ଥାନାନ୍ତର କରନ୍ତୁକିଚେନ୍ ଫର୍ନିଚର୍ରୁ ଲଫ୍ଟ ୟୁନିଟ୍ ରଖନ୍ତୁ, ତୀର ବିକଳ୍ପ କିମ୍ବା ମୁଭ୍ ଟୁଲ୍ ସହିତ ସେଗୁଡ଼ିକୁ ସ୍ଥାନାନ୍ତର କରନ୍ତୁ, ଏବଂ ଆବଶ୍ୟକ ଅନୁସାରେ ବକ୍ସ ଲଫ୍ଟ ଯୋଡ଼ନ୍ତୁ କିମ୍ବା ଆକାର ବଦଳାନ୍ତୁ।
- ଡିଫଲ୍ଟ ୧ ମିମି କ୍ୟାବିନେଟ ରିଡକ୍ସନ ବୁଝନ୍ତୁଡ୍ରୟର-ସ୍ତରୀୟ ନିର୍ମାଣରେ ପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ ଡିଫଲ୍ଟ ଭାବରେ ଚାରି ପାଖରେ ୧ ମିମି କମିଯାଏ ଜାଣନ୍ତୁ।
- ସିଙ୍କ୍ ୟୁନିଟ୍ ରେଲ୍ ଏବଂ ସ୍କର୍ଟିଂ ବିକଳ୍ପଗୁଡ଼ିକୁ ବୁଝନ୍ତୁସିଙ୍କ୍ ୟୁନିଟ୍ଗୁଡ଼ିକ ଉପର ଏବଂ ପଛ ରେଲ୍ ସହିତ କିପରି ତିଆରି ହୁଏ ଏବଂ କ୍ୟାବିନେଟ୍ ସ୍କର୍ଟିଂ ବିକଳ୍ପରୁ ସ୍କର୍ଟିଂ କିପରି ଚାଲୁ କିମ୍ବା ବନ୍ଦ କରାଯାଏ ତାହା ଶିଖନ୍ତୁ।
- କ୍ୟାବିନେଟ, ପାର୍ଟିସନ, ସଟର ଏବଂ ପ୍ୟାନେଲ ନିୟନ୍ତ୍ରଣରେ ପହଞ୍ଚିବା ପାଇଁ ସିଲେକ୍ସନ ଟ୍ରି ବ୍ୟବହାର କରନ୍ତୁଏହାର ଉପରର ସ୍ତରଗୁଡ଼ିକୁ ଦେଖାଇବା ଏବଂ ଆପଣଙ୍କୁ ଆବଶ୍ୟକ ନିୟନ୍ତ୍ରଣକୁ ସିଧାସଳଖ ଯିବା ପାଇଁ ଏକ କ୍ୟାବିନେଟ ଅଂଶ ଚୟନ କରନ୍ତୁ।
- ଗୋଟିଏ କ୍ଲିକରେ ଏକ ମାନକ ୱାର୍ଡରୋବ ଆଭ୍ୟନ୍ତରୀଣ ସଂରଚନା ଯୋଡ଼ନ୍ତୁୱାର୍ଡରୋବରେ ତଳ ଡ୍ରୟର ଭଳି ଏକ ମାନକ ସଂରଚନା ହାତରେ ତିଆରି ନକରି ଗୋଟିଏ କ୍ଲିକରେ ଯୋଡ଼ନ୍ତୁ।
- ଦୁଇଟି କ୍ୟାବିନେଟ ମଧ୍ୟରେ ଏକ ଭର୍ଟିକାଲ ଗୋଲା ପ୍ରୋଫାଇଲ ଯୋଡ଼ନ୍ତୁଉଭୟ କ୍ୟାବିନେଟ ଚୟନ କରନ୍ତୁ ଏବଂ ସେମାନଙ୍କ ମଧ୍ୟରେ ଏକ ଭର୍ଟିକାଲ ଗୋଲା ପ୍ରୋଫାଇଲ ଯୋଡ଼ିବା ପାଇଁ ବାମ ପଟେ ଥିବା properties ମେନୁ ଖୋଲନ୍ତୁ।
- ଠିକ୍ ସ୍ତରରେ furnish library ରୁ ରୋଷେଇ ଘର ୟୁନିଟ୍ ଯୋଡ଼ନ୍ତୁରୋଷେଇ ଘର ସ୍ତରରେ କାମ କରୁଥିବା ସମୟରେ furnish library ରୁ ରୋଷେଇ ଘର ୟୁନିଟ୍ ରଖନ୍ତୁ, ଯାହାଫଳରେ ସେଗୁଡ଼ିକ ସଠିକ୍ ଉଚ୍ଚତାରେ ପଡ଼ିବ।
- ମଡ୍ୟୁଲାର ବେସ୍, ୱାଲ୍ ଏବଂ ଖୋଲା ୟୁନିଟ୍ରୁ ଏକ TV ୟୁନିଟ୍ ତିଆରି କରନ୍ତୁFurnish ପ୍ୟାନେଲ୍ ଖୋଲନ୍ତୁ, ବହୁମୁଖୀ ମଡ୍ୟୁଲାର ଫର୍ନିଚର୍ ବାଛନ୍ତୁ ଏବଂ TV ୟୁନିଟ୍ ଗଠନ କରିବା ପାଇଁ ୟୁନିଟ୍ଗୁଡ଼ିକୁ ମିଶାନ୍ତୁ, ଘୂରାନ୍ତୁ ଏବଂ ସ୍ଥାନିତ କରନ୍ତୁ।
- ବେସ୍ ୟୁନିଟ୍ରୁ ୟୁନିଟ୍ର ଚଉଡ଼ା, ଗଭୀରତା ଓ ଉଚ୍ଚତା ଏକାସାଙ୍ଗରେ ବଦଳାନ୍ତୁବେସ୍ ୟୁନିଟ୍ଗୁଡ଼ିକୁ ଚୟନ କରନ୍ତୁ ଏବଂ ସେମାନଙ୍କର ମାପ ଏକାସାଙ୍ଗରେ ବଦଳାଇବା ପାଇଁ ଚଉଡ଼ା, ଗଭୀରତା ଓ ଉଚ୍ଚତା ମୂଲ୍ୟ ସମ୍ପାଦନ କରନ୍ତୁ।
- କ୍ୟାବିନେଟ ସ୍ତରରେ କ୍ୟାବିନେଟର ଆଭ୍ୟନ୍ତରୀଣ ରଙ୍ଗ ପରିବର୍ତ୍ତନ କରନ୍ତୁଏକ କ୍ୟାବିନେଟ ଚୟନ କରନ୍ତୁ, କ୍ୟାବିନେଟ ସ୍ତରକୁ ଯାଆନ୍ତୁ ଏବଂ ଏହାର ଆଭ୍ୟନ୍ତରୀଣ ରଙ୍ଗ ସେଟ କରନ୍ତୁ, ଯାହାଫଳରେ ପରିବର୍ତ୍ତନ କ୍ୟାବିନେଟର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶରେ ଲାଗୁ ହେବ।
- କନଷ୍ଟ୍ରକ୍ସନ ଏବଂ position ଫିଲ୍ଡ ମାଧ୍ୟମରେ ଏକ କ୍ୟାବିନେଟ ଲକ ପରିବର୍ତ୍ତନ କରନ୍ତୁ କିମ୍ବା ସ୍ଥାନାନ୍ତର କରନ୍ତୁ3D ରେ କ୍ୟାବିନେଟ ଲକ ଚୟନ କରି ଏବଂ ଏହାର position ଫିଲ୍ଡ ସମାୟୋଜିତ କରି ଏହାକୁ ସ୍ଥାନାନ୍ତର କରନ୍ତୁ, କାରଣ ଲକ ଏକ ସ୍ୱାଧୀନ ବସ୍ତୁ ନୁହେଁ ବରଂ କ୍ୟାବିନେଟର ଅଂଶ।
- ମଲ୍ଟି-ସିଲେକ୍ସନ ସହିତ ଏକାଥରେ ଅନେକ ୟୁନିଟ ବଦଳାନ୍ତୁକେବଳ ସେହି ୟୁନିଟଗୁଡ଼ିକ ଚୟନ କରନ୍ତୁ ଯାହା ଏକ ପରିବର୍ତ୍ତନ ସହଭାଗ କରିବ, ତାପରେ ଏହାକୁ ସମସ୍ତଙ୍କ ଉପରେ ଏକାଥରେ ଲାଗୁ କରନ୍ତୁ।
- ଏକାସାଙ୍ଗରେ ଏକାଧିକ ୱାଲ୍ ୟୁନିଟ୍ର ଗଠନ ପରିବର୍ତ୍ତନ କରନ୍ତୁକୋଣାର୍କ ୟୁନିଟ୍ ବ୍ୟତୀତ ସମସ୍ତ ୱାଲ୍ ୟୁନିଟ୍ ଚୟନ କରନ୍ତୁ, ତାପରେ bulk action ବ୍ୟବହାର କରି bulk structure ଚୟନ କରି ସେଗୁଡ଼ିକୁ ଏକାସାଙ୍ଗରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- କେବଳ ବିଦ୍ୟମାନ କ୍ୟାବିନେଟଗୁଡ଼ିକ ପାଇଁ ଏକ କନେକ୍ଟର କାର୍ଡ କ୍ଲୋନ କରନ୍ତୁକେବଳ ବିଦ୍ୟମାନ କ୍ୟାବିନେଟଗୁଡ଼ିକ ପାଇଁ ଲାଗୁହେଉଥିବା ଏକ ପରିବର୍ତ୍ତିତ ସଂସ୍କରଣ ସୃଷ୍ଟି କରିବାକୁ ଏକ କନେକ୍ଟର କାର୍ଡ କ୍ଲୋନ କରନ୍ତୁ।
- ଦୁଇଟି କ୍ୟାବିନେଟକୁ ଏକକ ବ୍ୟବହାରକାରୀ ଉପାଦାନରେ ମିଶ୍ରଣ କରନ୍ତୁଦୁଇଟି ଅଲଗା କ୍ୟାବିନେଟକୁ ଏକକ ଏକକ ପରି ବ୍ୟବହାର କରୁଥିବା ଏକ ବ୍ୟବହାରକାରୀ ଉପାଦାନରେ ମିଶ୍ରଣ କରନ୍ତୁ।
- ବ୍ଲାଇଣ୍ଡ କର୍ଣ୍ଣର ୟୁନିଟ୍ଗୁଡ଼ିକୁ ଡାହାଣ-ପାଖ କିମ୍ବା ବାମ-ପାଖ ଭାବରେ ବିନ୍ୟାସ କରନ୍ତୁସଠିକ୍ ଭାବରେ ବିନ୍ୟାସ ହେବା ପାଇଁ ଏକ ବ୍ଲାଇଣ୍ଡ କର୍ଣ୍ଣର ୟୁନିଟ୍କୁ ଡାହାଣ-ପାଖ କିମ୍ବା ବାମ-ପାଖ ବିକଳ୍ପରେ ସେଟ୍ କରନ୍ତୁ।
- Ctrl+C ଏବଂ Ctrl+V ସହିତ ସ୍ଥାପିତ ୱାର୍ଡରୋବକୁ ନକଲ କରନ୍ତୁଏକ ସ୍ଥାପିତ ୱାର୍ଡରୋବ ୟୁନିଟ୍ ନକଲ କରି ବାକି ସ୍ଥାନରେ ପେଷ୍ଟ କରନ୍ତୁ, ତାପରେ ସ୍ଥିତି ସମନ୍ୱୟ କରିବା ପାଇଁ ୟୁନିଟ୍ଗୁଡ଼ିକୁ ପରସ୍ପର ପଛରେ ଟାଣନ୍ତୁ।
- Edit connector କାର୍ଡ ସ୍ପେସିଂ ପ୍ରତି କ୍ୟାବିନେଟ୍, ସିଙ୍ଗଲ୍ ୟୁନିଟ୍ ପ୍ୟାନେଲ୍ କ୍ୟାମ୍ ମୋଡ୍ରେକେବଳ ଏକ କ୍ୟାବିନେଟ୍ ପାଇଁ କନେକ୍ଟର କାର୍ଡ ସ୍ପେସିଂ ବଦଳାନ୍ତୁ, ଅନ୍ୟ କୌଣସି କ୍ୟାବିନେଟ୍ ଉପରେ ପ୍ରଭାବ ପକାଇବା ବିନା।
- ୱାର୍ଡ୍ରୋବର ପ୍ରସ୍ଥ, ଉଚ୍ଚତା ଏବଂ ଗଭୀରତା ସମ୍ପାଦନ କରନ୍ତୁୱାର୍ଡ୍ରୋବର ପ୍ରସ୍ଥ, ଉଚ୍ଚତା ଏବଂ ଗଭୀରତା ପରିବର୍ତ୍ତନ କରନ୍ତୁ ଏବଂ ଆଭ୍ୟନ୍ତରୀଣ ବିନ୍ୟାସ ସ୍ୱୟଂଚାଳିତ ଭାବରେ ସମାୟୋଜିତ ହେବାକୁ ଦିଅନ୍ତୁ।
- SU ସର୍ଟକଟ ସହିତ Single Unit CAM Mode ପ୍ରବେଶ କରନ୍ତୁଏକ ପ୍ୟାନେଲ ପାଇଁ Single Unit CAM Mode ଖୋଲିବାକୁ ପ୍ରୋଡକ୍ସନ ଡିଜାଇନରେ SU କୀବୋର୍ଡ ସର୍ଟକଟ ବ୍ୟବହାର କରନ୍ତୁ।
- ବହୁମୁଖୀ ମଡ୍ୟୁଲାର ଫର୍ନିଚରରେ TV ବେସ୍ ଏବଂ TV ଡ୍ରୟର ୟୁନିଟ୍ ଖୋଜନ୍ତୁବହୁମୁଖୀ ମଡ୍ୟୁଲାର ଫର୍ନିଚର ବିଭାଗ ଅଧୀନରେ ସିଙ୍ଗଲ୍ କିମ୍ବା ଡବଲ୍ ଡୋର ଏବଂ short, 450 କିମ୍ବା 600 ଉଚ୍ଚତାର TV ବେସ୍ ଏବଂ TV ଡ୍ରୟର ୟୁନିଟ୍ ଖୋଜନ୍ତୁ।
- ଝୁଲାଇବା ବିଭାଗ ପାଇଁ ୱାର୍ଡରୋବ ହ୍ୟାଙ୍ଗର ଖୋଜନ୍ତୁଝୁଲାଇବା ବିଭାଗରେ ପାର୍ଟିସନ ସ୍ତର ତଳେ ଏକ ଆକ୍ସେସରୀ ଭାବରେ ୱାର୍ଡରୋବ ହ୍ୟାଙ୍ଗର ଖୋଜନ୍ତୁ, ଯେଉଁଠାରେ ଷ୍ଟୋରରେ ଅଣ-ବ୍ରାଣ୍ଡେଡ ହ୍ୟାଙ୍ଗର ପୂର୍ବରୁ ଉପଲବ୍ଧ ଅଛି।
- ଅନୁମତିପ୍ରାପ୍ତ ସୀମା ବାହାରେ ଥିବା କ୍ୟାବିନେଟ୍ ପ୍ରସ୍ଥ ଠିକ୍ କରନ୍ତୁଅନୁମତିପ୍ରାପ୍ତ ସୀମା ମଧ୍ୟରେ ଏକ କ୍ୟାବିନେଟ୍ ପ୍ରସ୍ଥ ଦିଅନ୍ତୁ, ଯାହାଫଳରେ ନିର୍ମାଣ ଅବୈଧ ବୋଲି ଦେଖାଉଥିବା ତ୍ରୁଟି ସିଷ୍ଟମ୍ ଦେଖାଇବା ବନ୍ଦ କରିବ।
- ଆପଣଙ୍କ 2D କ୍ୟାବିନେଟ ଲେଆଉଟରୁ 3D ମଡେଲ ତିଆରି କରନ୍ତୁ2D ଡିଜାଇନ ଭ୍ୟୁରେ କ୍ୟାବିନେଟଗୁଡ଼ିକ ରଖନ୍ତୁ ଏବଂ 3D କୁ ସୁଇଚ କରନ୍ତୁ, ଆପଣଙ୍କ ଲେଆଉଟରୁ 3D ମଡେଲ ସ୍ୱଚାଳିତ ଭାବରେ ତିଆରି ହେବ।
- କ୍ୟାବିନେଟର ସାମଗ୍ରୀ ଗୁଣଧର୍ମ କିପରି ସେଟ୍ କରାଯାଏଏକ କ୍ୟାବିନେଟର ସାମଗ୍ରୀ ଗୁଣଧର୍ମ ଅନେକ ଅଲଗା ଫିଲ୍ଡ ମାଧ୍ୟମରେ ସେଟ୍ କରାଯାଏ, ଏବଂ ଶଟରର ବାହ୍ୟ ଫିନିଶ ସାଧାରଣତଃ ଅନ୍ୟଗୁଡ଼ିକଠାରୁ ଅଲଗା ଭାବରେ ବଛାଯାଏ।
- 1800 mm ଉପରର କ୍ୟାବିନେଟ୍ଗୁଡ଼ିକ ଲଫ୍ଟ ୟୁନିଟ୍ ଭାବରେ କିପରି ଗଣାଯାଏAuto Presentation ଟେମ୍ପଲେଟ୍ର ସର୍ବନିମ୍ନ ଏଲିଭେସନ୍ ଏବଂ Loft detection ସୁଇଚ୍ କିପରି ନିର୍ଣ୍ଣୟ କରେ ଯେ 1800 mm ଉପରର ଏକ କ୍ୟାବିନେଟ୍ ଲଫ୍ଟ ୟୁନିଟ୍ ଭାବରେ ଗଣାଯିବ କି ନାହିଁ, ତାହା ଜାଣନ୍ତୁ।
- ସର୍ବନିମ୍ନ ଏବଂ ସର୍ବାଧିକ କ୍ୟାବିନେଟ୍ ଆକାର ସୀମା କିପରି କାମ କରେଏକ କ୍ୟାବିନେଟ୍ର ଓସାର, ଉଚ୍ଚତା ଏବଂ ଗଭୀରତାରେ ସର୍ବନିମ୍ନ ଏବଂ ସର୍ବାଧିକ ଆକାର ସୀମା କିପରି ଲାଗୁ ହୁଏ ଏବଂ ସେଗୁଡ଼ିକ କେଉଁଠି ବିନ୍ୟାସ କରାଯାଏ ଜାଣନ୍ତୁ।
- admin portal ରେ ଥିବା ବିଦ୍ୟମାନ କ୍ୟାବିନେଟ ଆଇଟମଗୁଡ଼ିକୁ ପରିଚାଳନା ଏବଂ ସମ୍ପାଦନ କରନ୍ତୁadmin portal ରେ ଥିବା ବିଦ୍ୟମାନ କ୍ୟାବିନେଟ ଆଇଟମଗୁଡ଼ିକୁ ପରିଚାଳନା ଏବଂ ସମ୍ପାଦନ କରନ୍ତୁ।
- Place wall units and tall units from the kitchen furniture libraryPlace a wall or tall unit from the kitchen furniture library and adjust its dimensions, using the same placement options as other cabinet types.
- Y-ଅକ୍ଷ ବ୍ୟବହାର କରି ୱାଲ୍ କ୍ୟାବିନେଟ୍ ଉପରେ ଲଫ୍ଟ ରଖନ୍ତୁଲଫ୍ଟ ସଠିକ୍ ଭାବରେ ୱାଲ୍ ୟୁନିଟ୍ ଉପରେ ରହିବା ପାଇଁ ଲଫ୍ଟର Y-ଅକ୍ଷକୁ ୱାଲ୍ କ୍ୟାବିନେଟ୍ର Y-ଅକ୍ଷ ସହିତ 600 mm ଯୋଡ଼ି ସେଟ୍ କରନ୍ତୁ।
- SKU ଗଠନ ପରିବର୍ତ୍ତନ ପରେ କ୍ୟାଚ୍ ରିଫ୍ରେସ୍ କରନ୍ତୁ ଏବଂ କ୍ୟାବିନେଟ୍ ବଦଳାନ୍ତୁକାଟାଲଗରେ SKU ଗଠନ ପରିବର୍ତ୍ତନ କରିବା ପରେ, କ୍ୟାଚ୍ ରିଫ୍ରେସ୍ କରନ୍ତୁ ଏବଂ design portal ରେ କ୍ୟାବିନେଟ୍ ବଦଳାନ୍ତୁ।
- ଏକ କ୍ୟାବିନେଟ୍ ଘୂର୍ଣ୍ଣନ କରନ୍ତୁ ଏବଂ ଏହାର ସ୍ଥିତି ଓ ଘୂର୍ଣ୍ଣନ ସେଟ୍ କରନ୍ତୁସ୍ପେସ୍ ବାର୍ କିମ୍ବା ସଠିକ୍ Y କୋଣ ସହିତ ଏକ ଚୟନିତ କ୍ୟାବିନେଟ୍ ଘୂର୍ଣ୍ଣନ କରନ୍ତୁ, ଏକ ପ୍ୟାନେଲର ଫିନିଶ୍ ଘୂର୍ଣ୍ଣନ କରନ୍ତୁ, ଏବଂ ତଳ ଉଚ୍ଚତା ସହିତ Position Y ସଠିକ୍ ଭାବରେ ପଢ଼ନ୍ତୁ।
- ୟୁନିଟ୍-ସ୍ତରୀୟ ପରିବର୍ତ୍ତନଗୁଡ଼ିକ ପ୍ୟାନେଲକୁ କିପରି ପ୍ରସାରିତ ହୁଏ ଦେଖନ୍ତୁୟୁନିଟ୍-ସ୍ତରୀୟ ମେଟେରିଆଲ୍ ପରିବର୍ତ୍ତନ କେବେ ଏକ ପ୍ୟାନେଲରେ ପହଞ୍ଚେ ଏବଂ ଅଟୋମେସନ୍ ନିୟମ ଓ ଲିଙ୍କ୍ ହୋଇଥିବା SKU ଏହାକୁ କିପରି ଓଭରରାଇଡ୍ କରିପାରେ ଜାଣନ୍ତୁ।
- ସାଇଜିଂ ନିୟମ ମାଧ୍ୟମରେ କ୍ୟାବିନେଟ୍ର ସର୍ବନିମ୍ନ ଓ ସର୍ବାଧିକ ଆକାର ସୀମା ସେଟ୍ କରନ୍ତୁସ୍ରୋତ ମଡେଲ୍ ଏବଂ ଆଡମିନ୍ ପୋର୍ଟାଲ୍ରେ ସାଇଜିଂ ନିୟମ କନଫିଗର କରନ୍ତୁ, ଯାହାଫଳରେ କ୍ୟାବିନେଟ୍ର ଆକାର ଅନୁମତିପ୍ରାପ୍ତ ସୀମା ଅତିକ୍ରମ କରିପାରିବ ନାହିଁ।
- କ୍ୟାବିନେଟ୍ କିମ୍ବା ପାର୍ଟିସନ୍ରେ ବାହ୍ୟ ଓ ଆଭ୍ୟନ୍ତରୀଣ ସୀମା ପାଇଁ ସାଇଜିଂ ନିୟମ ସେଟ୍ କରନ୍ତୁଏକ ୟୁନିଟ୍ର ସୀମା ଏହାର ବାହ୍ୟ ମାପ ଉପରେ ଲାଗୁ ହେବ କି ଏହାର ଆଭ୍ୟନ୍ତରୀଣ ଖାଲି ସ୍ଥାନ ଉପରେ ଲାଗୁ ହେବ ତାହା ବାଛନ୍ତୁ, ଏବଂ ସେଗୁଡ଼ିକୁ ଗୋଟିଏ ୟୁନିଟ୍ କରି କିମ୍ବା ଏକାସାଙ୍ଗରେ ଲାଗୁ କରନ୍ତୁ।
- ଫ୍ଲୋର ପ୍ଲାନରେ କ୍ୟାବିନେଟ ଲେବଲଗୁଡ଼ିକ ସ୍ପଷ୍ଟ ଭାବରେ ଦେଖାନ୍ତୁଫ୍ଲୋର ପ୍ଲାନରେ ପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ ଏହାର ନମ୍ବର ଲେବଲ ଦେଖାଏ, ଏବଂ ଯେତେବେଳେ ଅନ୍ୟ ଉପାଦାନ ସହିତ ଲେଖା ଓଭରଲ୍ୟାପ ହୁଏ, ସେତେବେଳେ ଆପଣ ଏକ କଷ୍ଟମ ଲିଡର-ଷ୍ଟାଇଲ ଲେବଲ ଯୋଡ଼ିପାରିବେ।
- କ୍ୟାବିନେଟ, ୱାର୍ଡରୋବ ଏବଂ କଷ୍ଟମ ପ୍ୟାନେଲ ବର୍ଗଗୁଡ଼ିକୁ ବୁଝନ୍ତୁInfurnia କିପରି ୟୁନିଟଗୁଡ଼ିକୁ ତିନୋଟି ଅଲଗା ବର୍ଗରେ ସଂଗଠିତ କରେ ଶିଖନ୍ତୁ: କ୍ୟାବିନେଟ, ୱାର୍ଡରୋବ ଏବଂ କଷ୍ଟମ ପ୍ୟାନେଲ।
- ୱାର୍ଡ୍ରୋବ ଡିଜାଇନ୍ ତିଆରି କରିବାକୁ FR ସର୍ଟକଟ୍ ବ୍ୟବହାର କରନ୍ତୁFR ସର୍ଟକଟ୍ ସହିତ ୱାର୍ଡ୍ରୋବ ଡିଜାଇନ୍ ଆରମ୍ଭ କରନ୍ତୁ, ତାପରେ ଡବଲ୍ ସ୍ୱିଙ୍ଗ୍ ସଟର ରଖନ୍ତୁ ଏବଂ ଭିତରର କାର୍କାସ୍ ଉପାଦାନ ପରିଚାଳନା କରନ୍ତୁ।
- Add a custom cabinet label and center it in 3DTurn off the default labels, add your own multileader label with a small arrow head, and place it at the center of the cabinet.
- Add hanger rods and props to cabinetsAdd hanger rods through partition-level customization and add props so they become part of the cabinet.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add props to cabinets via partition-level customizationAdd bags, suitcases, storage boxes and other props to a cabinet by customizing a partition.
- Add, space and remove stability rails on a cabinetAdd stability rails from the cabinet's property panel and let the system space them evenly between the bottom and top panels.
- Build an L-shaped beam unit in a wardrobeSet the wardrobe's overall height, width and depth at wardrobe level before building the L-shaped beam unit.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Bulk edit structure on owned cabinets, not library itemsBulk structure edit only works on owned cabinets and wardrobes, so copy a library item into your own folder before changing its construction.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change drawing units with UN and set room type for furnishingSwitch drawing units and decimals with UN, then rename each room and assign a room type so the right furnishing modules are offered.
- Check connector scope on cabinets versus the whole projectLearn whether connector scenario changes apply only to the selected cabinets or across the whole project, and how to see which connectors are present on particular cabinets.
- Check connectors and collisions in 3D using X-ray and single unit C modeSpot collisions in X-ray mode and handle exceptions in a single cabinet with single unit C mode.
- Choose a kitchen cabinet typeLearn which cabinet types the kitchen module offers for your design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Copy and paste units at drawing levelDuplicate units on the drawing with the standard copy-paste shortcut so similar units can be placed repeatedly without rebuilding them.
- Create a slot in a full-height wardrobe via custom wardrobesSet the column configuration so the wardrobe geometry changes to create the slot you need.
- Create and reuse fixed wardrobe module layoutsSet up wardrobe modules as fixed layouts so their arrangement stays the same across drawings.
- Customize cabinets through the selection treeUse the selection tree and its icons to customize a cabinet however you want.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- Edit and customise cabinets in the designAdjust standard cabinet elements such as double shelves so modules fit your design instead of staying as supplied.
- କ୍ୟାବିନେଟ୍ ଏଡିଟିଂ ପ୍ୟାନେଲ୍ ଟ୍ୟାବ୍ଗୁଡ଼ିକରେ ସେଟିଂସ୍ ଖୋଜନ୍ତୁଆପଣଙ୍କୁ ଆବଶ୍ୟକ ସେଟିଂ ପାଇବା ପାଇଁ Quick Access, Customize ଏବଂ Construction ଟ୍ୟାବ୍ ଏବଂ ଚୟନ ବୃକ୍ଷ ବ୍ୟବହାର କରନ୍ତୁ।
- Find wardrobe modules in partition internals on the admin portalLocate the wardrobe modules that are available under partition internals in the admin portal.
- ଏକ କ୍ୟାବିନେଟ୍ କିପରି ସ୍ତରରେ ସଂଗଠିତ ହୁଏଡିଜାଇନ୍ ମଡ୍ୟୁଲରେ ଏକ କ୍ୟାବିନେଟ୍ କ୍ୟାବିନେଟ୍, ପାର୍ଟିସନ୍, ଶଟର ସିଷ୍ଟମ୍ ଏବଂ ପ୍ୟାନେଲ୍ ସ୍ତରରୁ ନିର୍ମିତ, ଏବଂ ପ୍ରତ୍ୟେକ ସ୍ତରର ନିଜସ୍ୱ ସେଟିଂସ୍ ଥାଏ।
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- How minimum and maximum depth rules size a unitLearn how minimum depth and maximum depth set the allowed range for a unit's depth, and what happens when neither is set.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- How tall and mid units are defined by heightLearn how tall units are standardised from about 1500 mm up to 2400 mm including the skirting, and that units below that range are mid units.
- How wardrobe internals sit under the parent partitionLearn how the parent partition sits at the top of a wardrobe and holds every sub-partition, shelf, drawer system and other internal beneath it in the hierarchy.
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Identify and edit a selected cabinet in the selection treeSelect a cabinet to see its unit type and change properties such as width, depth, height, finishes, core material and edge banding.
- Insert a base or wall unit from the toolbar insert menuAdd a cabinet to the design view by picking a base or wall unit from the toolbar insert menu and placing it in the room.
- Insert base and wall units via FR shortcut and insert menuPlace a base unit from the insert menu, then add wall units with the FR enter shortcut and align them to walls.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- ନୂତନ ପ୍ରୋଜେକ୍ଟଗୁଡ଼ିକ କେଉଁ ୟୁନିଟ୍ ଓ ସଠିକତା ବ୍ୟବହାର କରେ ଜାଣନ୍ତୁନୂତନ ପ୍ରୋଜେକ୍ଟଗୁଡ଼ିକ ମିଲିମିଟରରେ ମାପ କରାଯାଏ, 1 mm ପର୍ଯ୍ୟନ୍ତ ସଠିକତା ସହିତ।
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Lock units against movementToggle the lock movement button in a selected unit's property panel header to lock it against movement.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Move a unit with the gimbal or the position fieldsReposition a unit in the floor plan or with the 3D gimbal, using the coloured axis handles to move it in the direction you want.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a double-swing wardrobe using the FR commandCreate a new design from a room template, then use the FR command to place a double-swing wardrobe.
- Place a separate filler at the side of a unitPlace a separate filler at the side of the unit, where the top panel does not extend to cover it.
- Place cabinets without pressing Furnish each timeSelect a cabinet type and its placement options open automatically so you can place it directly, then pick another type to keep placing cabinets.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Read the blue highlight to know your working level in a cabinetLearn what the blue highlight in the 3D view tells you about the partition level you are currently working on.
- Read the yellow and blue bounding boxes when selecting a unitLearn what the yellow and blue bounding boxes mean when you select a unit and what the box measures.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Outputs ସେଟିଂସରେ ୟୁନିଟ୍ ଏବଂ ପ୍ୟାନେଲ୍ ଆନୋଟେସନ୍ ପୁନଃ ନ୍ୟସ୍ତ କରନ୍ତୁଦୁଇଟି ମୋଡ୍ ମଧ୍ୟରୁ ଗୋଟିଏ ବ୍ୟବହାର କରି ଆପଣଙ୍କ ଆଉଟପୁଟ୍ରେ ୟୁନିଟ୍ ଏବଂ ପ୍ୟାନେଲ୍ ଲେବଲ୍ ପୁନଃ ସଂଖ୍ୟା ଦିଅନ୍ତୁ, ପ୍ରଥମେ ନିଶ୍ଚିତ କରନ୍ତୁ କାରଣ ପରିବର୍ତ୍ତନ ପୂର୍ବାବସ୍ଥାକୁ ଫେରାଯାଇପାରିବ ନାହିଁ।
- Remove connectors such as legs from a single cabinetRemove connectors such as legs from one cabinet in its Connectors and Scenarios settings, then correct other units with the same configuration individually or through the default rules.
- Replicate customized units by editing modular base unitsStart from a modular furniture base unit and edit it into the customized unit you need.
- Reuse kitchen wall blind corner units in loft designsUse blind corner units from under kitchen wall units in loft designs and hide the panels you do not want there.
- Rotate a displaced loft unit back to its original orientationRotate the loft unit three more times to bring it back to its original orientation.
- Rotate and place units precisely with spacebar and MVRotate a unit while placing it with the spacebar, then use the MV shortcut for precise placement.
- Select a cabinet before rotating itSelect the cabinet first so rotating it does not move it out of its bounding box.
- Select all wardrobes together to set total heightSelect all wardrobe units together and update the total height value to set the wardrobe's total height.
- Set a standard wardrobe height of 2100 mmUse 2100 mm as the standard height when you design a wardrobe.
- Set cabinet X and Y position values with Z auto-generatedSet only the X and Y position values for a cabinet, where Y is the height from the floor, and let Z be generated automatically.
- Set cabinet parameters so parametric resizing worksSet each panel's position parameters correctly while creating the cabinet so it can resize parametrically.
- Set min/max width rules for double and triple sliding wardrobesConfigure width limits as rules on sliding wardrobe types so users can still choose any size within the allowed range.
- Set sliding wardrobe depth at the wardrobe levelSet the depth for a sliding wardrobe once at the wardrobe level rather than panel by panel.
- ତଳ ଟାଇଲ ଫାଙ୍କ ଉପରେ ୱାଲ ୟୁନିଟର ତଳ ଉଚ୍ଚତା ସେଟ କରନ୍ତୁଆଧାର ୟୁନିଟଗୁଡ଼ିକ ଶୂନ ସ୍ତରରୁ 12 mm ଉପରେ କାହିଁକି ରହେ ଜାଣନ୍ତୁ, ଯାହାଫଳରେ ୱାଲ ୟୁନିଟର ତଳ ଉଚ୍ଚତା ମାନକ 1450 mm ଉପରେ 12 mm ସେଟ ହୁଏ।
- ବ୍ଲାଇଣ୍ଡ କର୍ଣ୍ଣର ୟୁନିଟ ଏବଂ ଡମି ପ୍ୟାନେଲ ସେଟ୍ ଅପ୍ କରନ୍ତୁଶଟର ଏବଂ ଅଣ-ଶଟର ସାମ୍ନା ପ୍ୟାନେଲ ମଧ୍ୟରେ ଏକ ଡମି ପ୍ୟାନେଲ ସହିତ ଏକ ବ୍ଲାଇଣ୍ଡ କର୍ଣ୍ଣର ୟୁନିଟ ତିଆରି କରନ୍ତୁ ଏବଂ ଏହାର ଗଭୀରତା ସେଟ୍ କରନ୍ତୁ।
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- ଏକ ଏଲିଭେସନ ଦୃଶ୍ୟରେ ସ୍କେଲିଟନ ମୋଡ ସହିତ କ୍ୟାବିନେଟର ଆଭ୍ୟନ୍ତରୀଣ ଅଂଶ ଦେଖାନ୍ତୁଶଟରଗୁଡ଼ିକୁ ଲୁଚାଇ କ୍ୟାବିନେଟର ଆଭ୍ୟନ୍ତରୀଣ ପାର୍ଟିସନ ଓ କାର୍କାସ ଦେଖାଇବା ପାଇଁ ଏକ ଏଲିଭେସନ ଦୃଶ୍ୟରେ Turn on Skeleton mode କରନ୍ତୁ, ଯାହାଫଳରେ ଆପଣ ସେଗୁଡ଼ିକୁ ସିଧାସଳଖ ଡାଇମେନ୍ସନ କରିପାରିବେ।
- Toggle X-ray mode for cabinets with the XR shortcutToggle X-ray mode with the XR shortcut to inspect cabinet internals quickly, even across several selected cabinets at once.
- Understand cabinet boundary box colours when snappingLearn what a red boundary box means while you place cabinets.
- Understand cabinet customization levelsLearn how cabinet customization is organized into five levels, from changes that affect the whole cabinet down to individual panels.
- Understand how Infernia treats modular units as BIMLearn how Infernia understands every part of a modular unit such as a cabinet or wardrobe, so shelves can be added or moved.
- Understand how unit width changes are appliedLearn which side of a unit grows or shrinks when you change its width in Infurnia.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Understand why filler cabinets show a carcass box in floorplanLearn why a filler cabinet appears as a box in plan and what that box's size reflects.
- Use X-ray mode to select unitsEnter X-ray mode with the short form XR so you can select units.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- ଏକକ ୟୁନିଟ ମୋଡରେ ଫିଲ୍ଟର ବ୍ୟବହାର କରି ସଂଘର୍ଷ ସ୍ୱଚାଳିତ ଭାବରେ ସମାଧାନ କରନ୍ତୁସଂଘର୍ଷ ଚିହ୍ନଟ ଚଲାଇ, ଉଲ୍ଲଂଘନଗୁଡ଼ିକୁ ଫିଲ୍ଟର କରି ଏବଂ ତଳ-ଡାହାଣ ବିକଳ୍ପରୁ ସେଗୁଡ଼ିକୁ ସମାଧାନ କରି ଏକକ ୟୁନିଟ ମୋଡରେ ସଂଘର୍ଷ ସମାଧାନ କରନ୍ତୁ।
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.
- ପାର୍ଟିସନ୍ ସ୍ତର ଏବଂ ଡ୍ରୟର ସେଟ୍ ମାଧ୍ୟମରେ ଏକ କ୍ୟାବିନେଟ୍ରେ ଏକ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁଏକ କ୍ୟାବିନେଟ୍ର ପାର୍ଟିସନ୍ ସ୍ତରରୁ ଏହାର ଭିତରେ ଏକ ଡ୍ରୟର ଭର୍ତ୍ତି କରନ୍ତୁ, ତାପରେ ଏହାର ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁ ଏବଂ ଆବଶ୍ୟକ ହେଲେ ତଳେ ଏକ ସେଲଫ୍ ଯୋଡ଼ନ୍ତୁ।
- କ୍ୟାବିନେଟ ଏବଂ ୱାର୍ଡରୋବରେ ଶଟର ଡିଜାଇନ ସେଭ କରି ପୁନଃବ୍ୟବହାର କରନ୍ତୁInfurnia ରେ ଏକ ଶଟର ଡିଜାଇନ ସେଭ କରନ୍ତୁ ଏବଂ modify shutter design ମାଧ୍ୟମରେ ଏହାକୁ କ୍ୟାବିନେଟ ଏବଂ ୱାର୍ଡରୋବରେ ଲାଗୁ କରନ୍ତୁ।
- ୟୁନିଟ୍ଗୁଡ଼ିକରେ ସ୍କର୍ଟିଂ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଏହାକୁ ଡାହାଣ ପାର୍ଶ୍ୱରେ ଦେଖାନ୍ତୁଅଣ-କାଠ ସ୍କର୍ଟିଂ ଚାଲୁ କରନ୍ତୁ, କାର୍କାସ୍ ଉଚ୍ଚତା ସଠିକ୍ ଭାବରେ ସେଟ୍ କରନ୍ତୁ ଏବଂ ପ୍ରତି ପାର୍ଶ୍ୱରେ ସ୍କର୍ଟିଂ ଦୃଶ୍ୟମାନତା ସକ୍ଷମ କରନ୍ତୁ।
- ସମଗ୍ର କ୍ୟାବିନେଟ୍ କିମ୍ବା ଏକକ ପାର୍ଟିସନ୍ରେ ଏକ ସଟର୍ ସିଷ୍ଟମ୍ ଯୋଡ଼ନ୍ତୁଏକ ଖୋଲା କ୍ୟାବିନେଟ୍ରେ ସମଗ୍ର ଭାବରେ କିମ୍ବା କେବଳ ଏକ ପାର୍ଟିସନ୍ରେ ଏକ ସଟର୍ ସିଷ୍ଟମ୍ ଯୋଡ଼ନ୍ତୁ।
- Add and configure internal drawers in a wardrobeAdd an internal drawer to a wardrobe by defining the partition height, setting the drawer to internal and box type, and aligning fillers with the shutter thickness.
- ଏକାଧିକ ୟୁନିଟରେ ଏକସଙ୍ଗେ କୋର ଏବଂ ମ୍ୟାଟେରିଆଲ ପରିବର୍ତ୍ତନ ଲଗାନ୍ତୁବଲ୍କ ଏଡିଟ, ଗ୍ରୁପ ସିଲେକ୍ସନ ଏବଂ ସାଧାରଣ ପ୍ରପର୍ଟି ବ୍ୟବହାର କରି ଏକସଙ୍ଗେ ଅନେକ ୱାର୍ଡରୋବ ଏବଂ କ୍ୟାବିନେଟର ମ୍ୟାଟେରିଆଲ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- ୟୁନିଟ୍ରେ ସ୍କର୍ଟିଂ ପ୍ରକାର ଓ ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁପ୍ରତି ୟୁନିଟ୍ ପାଇଁ କାଠ କିମ୍ବା ଅଣ-କାଠ ସ୍କର୍ଟିଂ ବାଛନ୍ତୁ ଏବଂ construction ବିକଳ୍ପରୁ ସ୍କର୍ଟିଂ ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁ।
- କ୍ୟାବିନେଟ ନିର୍ମାଣ ସୂତ୍ରରେ ପ୍ୟାନେଲ ମୋଟେଇର ସନ୍ଦର୍ଭକଞ୍ଚା ସଂଖ୍ୟା ଟାଇପ ନକରି ସୁପାରିଶରୁ ମୋଟେଇ ପାରାମିଟର ବାଛି ନିର୍ମାଣ ସୂତ୍ରରେ ପ୍ୟାନେଲର ମୋଟେଇକୁ ସନ୍ଦର୍ଭ କରନ୍ତୁ।
- ଏକ କ୍ୟାବିନେଟର ଉଭୟ ପାର୍ଶ୍ୱ ପାଇଁ ଫିଲର ପ୍ୟାନେଲ କ୍ଲୋନ କରି ପରିବର୍ତ୍ତନ କରନ୍ତୁଏକ ଫିଲର ପ୍ୟାନେଲ କ୍ଲୋନ କରି ଏହାକୁ ପରିବର୍ତ୍ତନ କରନ୍ତୁ, ଯାହାଫଳରେ କ୍ୟାବିନେଟର ପ୍ରତ୍ୟେକ ପାର୍ଶ୍ୱ ନିଜର ଫିଲର ପାଇବ।
- କ୍ୟାବିନେଟ ସେଟିଂସରେ କ୍ୟାବିନେଟ ସ୍କର୍ଟିଂ ବିନ୍ୟାସ କରନ୍ତୁକ୍ୟାବିନେଟ ବିନ୍ୟାସରେ କ୍ୟାବିନେଟ ସ୍କର୍ଟିଂ ବିକଳ୍ପଗୁଡ଼ିକ ଖୋଜନ୍ତୁ।
- କ୍ୟାବିନେଟରେ ଡ୍ରୟର ସିଷ୍ଟମ କିପରି କାମ କରେଡ୍ରୟର ସ୍ତରରେ ଡ୍ରୟର ସିଷ୍ଟମ କିପରି ବିନ୍ୟାସ ହୁଏ ତାହା ଶିଖନ୍ତୁ, ଯେଉଁଥିରେ ମେକାନିଜିମ ପ୍ରକାର ବାଛିବା ଏବଂ ପ୍ରତ୍ୟେକ ଡ୍ରୟର ପାଇଁ ହାର୍ଡୱେର ମିଶାଇବା ଅନ୍ତର୍ଭୁକ୍ତ।
- ଗୋଟିଏ କ୍ୟାବିନେଟ୍ର କାର୍କାସ୍ ଫିନିଶ୍ ବଦଳାନ୍ତୁନିର୍ବାଚିତ କ୍ୟାବିନେଟ୍ର ସମସ୍ତ କାର୍କାସ୍ ପ୍ୟାନେଲ୍ ଏକାସାଙ୍ଗରେ ଅପଡେଟ୍ କରିବାକୁ କ୍ୟାବିନେଟ୍ ସ୍ତରରେ କାର୍କାସ୍ ଫିନିଶ୍ ବଦଳାନ୍ତୁ, ସେହି ପ୍ରକାରର ଅନ୍ୟ କ୍ୟାବିନେଟ୍କୁ ପ୍ରଭାବିତ ନକରି।
- ଶୀଘ୍ର ସମାନ କ୍ୟାବିନେଟ୍ ତିଆରି କରିବା ପାଇଁ ଏକ କ୍ୟାବିନେଟ୍ କପି କରି ପେଷ୍ଟ କରନ୍ତୁପ୍ରଥମେ ଏକ କ୍ୟାବିନେଟ୍ ସମ୍ପୂର୍ଣ୍ଣ ଭାବେ ସଜାଡ଼ନ୍ତୁ, ତାପରେ ପ୍ରତ୍ୟେକଟିକୁ ଅଲଗା ଅଲଗା ସଜାଡ଼ିବା ଅପେକ୍ଷା ଶୀଘ୍ର ଏକାଧିକ ସମାନ କ୍ୟାବିନେଟ୍ ତିଆରି କରିବା ପାଇଁ ଏହାକୁ କପି କରି ପେଷ୍ଟ କରନ୍ତୁ।
- ଏକ କ୍ୟାବିନେଟର ପ୍ରତ୍ୟେକ ପ୍ୟାନେଲରେ ଏକ ଏଜ୍ ବ୍ୟାଣ୍ଡ ଲଗାନ୍ତୁକ୍ୟାବିନେଟ ସ୍ତରରେ ଏକ ଏଜ୍ ବ୍ୟାଣ୍ଡ ଯୋଡ଼ନ୍ତୁ, ଯାହାଫଳରେ ଏହା ସେହି କ୍ୟାବିନେଟର ପ୍ରତ୍ୟେକ ପ୍ୟାନେଲରେ ଲାଗିବ।
- ରୋଷେଇ ଘର କ୍ୟାବିନେଟ ସ୍କର୍ଟିଂ ମୋଟ ୟୁନିଟ ଉଚ୍ଚତାକୁ କିପରି ପ୍ରଭାବିତ କରେରୋଷେଇ ଘର କ୍ୟାବିନେଟରେ ପ୍ରାୟ 100 mm ସ୍କର୍ଟିଂ କିପରି ଡାଇମେନସନରେ ଦେଖାଯାଉଥିବା କାର୍କାସ ଉଚ୍ଚତା ସହ ଯୋଡ଼ାଯାଇ ମୋଟ ୟୁନିଟ ଉଚ୍ଚତା ଦିଏ, ତାହା ଜାଣନ୍ତୁ।
- କାଟାଲଗ ଗୋଦାମରୁ ଏକ କଷ୍ଟମ ନିର୍ମାଣ ୟୁନିଟ୍ ଏକ ଡିଜାଇନରେ ଯୋଡ଼ନ୍ତୁଏକ ଗୋଦାମ ବେସ ୟୁନିଟ୍ ଆପଣଙ୍କ କାଟାଲଗକୁ ଆଣନ୍ତୁ, ଯାହା design portal ଅଧୀନରେ furnish ତଳେ ଦେଖାଯିବ।
- ଡ୍ରପଡାଉନ ପୁନଃବ୍ୟବହାର ବିକଳ୍ପ ବ୍ୟବହାର କରି ଏକାଧିକ କ୍ୟାବିନେଟ ଅଂଶରେ ଫିନିଶ ଲଗାନ୍ତୁଲାଇବ୍ରେରୀରୁ ଏକ କ୍ୟାବିନେଟର ଫିନିଶ ବଦଳାନ୍ତୁ, ତାପରେ ଡ୍ରପଡାଉନ ମାଧ୍ୟମରେ ସେହି ଫିନିଶକୁ carcass external ଏବଂ carcass internal ଭଳି ଅନ୍ୟ ଅଂଶରେ ପୁନଃବ୍ୟବହାର କରନ୍ତୁ।
- କ୍ୟାବିନେଟ ସ୍ତରରେ ଶଟର ରଙ୍ଗ ଏବଂ ପ୍ୟାନେଲ ସ୍ତରରେ ପ୍ୟାନେଲ ଫିନିଶ ପରିବର୍ତ୍ତନ କରନ୍ତୁଏକ ସମ୍ପୂର୍ଣ୍ଣ କ୍ୟାବିନେଟ ପାଇଁ ଶଟର ରଙ୍ଗ ଏବଂ ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ ପ୍ୟାନେଲ ପାଇଁ ବାହ୍ୟ ଫିନିଶ ସେଟ କରନ୍ତୁ।
- Fix a drawer that crosses the cabinet frontCheck the Drawer Back Gap on an external drawer so the drawer stops crossing the cabinet front.
- ୟୁନିଟ୍ରୁ ସ୍କର୍ଟିଂ ହଟାନ୍ତୁSkirting Visibility ତଳେ ଥିବା ଆଗ ସ୍କର୍ଟିଂ ବନ୍ଦ କରନ୍ତୁ, ଯାହାଫଳରେ ୟୁନିଟ୍ ଆଉ ଆଗରେ ସ୍କର୍ଟିଂ ଦେଖାଇବ ନାହିଁ।
- କ୍ୟାବିନେଟ ଏବଂ ଆଇଲ୍ୟାଣ୍ଡ ରୋଷେଇଘର ପାଇଁ ସଠିକ୍ ଏଲିଭେସନ୍ ବାଛନ୍ତୁଆପଣଙ୍କ ରୋଷେଇଘର ଲେଆଉଟ୍ ସହିତ ମେଳ ଖାଉଥିବା ଏଲିଭେସନ୍ ପଦ୍ଧତି ବାଛନ୍ତୁ, ତାପରେ ଚିତ୍ରରେ ମାପ ଯୋଡ଼ନ୍ତୁ।
- ସ୍ଲାଇଡିଂ ଶଟର ବିଶିଷ୍ଟ ୟୁନିଟ୍ରେ ବାଧା ସୃଷ୍ଟି କରୁଥିବା ଡ୍ରୟର ଫିଲର ହଟାନ୍ତୁଭର୍ଟିକାଲ୍ ପାର୍ଟିଶନ୍ ଏବଂ ଅତି ବାମ କିମ୍ବା ଡାହାଣରେ ଡ୍ରୟର ଥିବା ସ୍ଲାଇଡିଂ ଶଟର ବିଶିଷ୍ଟ ୟୁନିଟ୍ରେ, ଯେଉଁ ପାଖର ଫିଲର ଅଲଗା ଭାବରେ ବାଧା ସୃଷ୍ଟି କରିବ, ସେହି ଫିଲରକୁ Construction ପ୍ୟାନେଲରୁ ହଟାନ୍ତୁ।
- ୱାର୍ଡ୍ରୋବରେ ବ୍ୟବହାରଯୋଗ୍ୟ ଡ୍ରୟର ଗଭୀରତା ନିର୍ଣ୍ଣୟ କରନ୍ତୁକ୍ୟାବିନେଟ ଗଭୀରତାରୁ ସେଲ୍ଫ ରିଭିଲ, ବ୍ୟାକ ପ୍ୟାନେଲ ଅଫସେଟ, ବ୍ୟାକ ପ୍ୟାନେଲ ମୋଟେଇ ଓ ଡ୍ରୟର ଫାସିଆ ମୋଟେଇ ବାଦ ଦେଇ ୱାର୍ଡ୍ରୋବ ଡ୍ରୟରର ମାପ କରନ୍ତୁ।
- ୱାଲ୍ କ୍ୟାବିନେଟ୍ର ତଳ ପ୍ୟାନେଲ୍ରେ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଓ ସ୍ପଟ୍ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁୱାଲ୍ କ୍ୟାବିନେଟ୍ର ତଳ ପ୍ୟାନେଲ୍ରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଓ ଏକ ସ୍ପଟ୍ଲାଇଟ୍ ଯୋଡ଼ି ତାହାକୁ ଆଲୋକିତ କରନ୍ତୁ।
- ଯେକୌଣସି ୟୁନିଟ୍ ପ୍ରକାରରେ ଫିଙ୍ଗର ଗ୍ରୁଭ୍ ପ୍ୟାନେଲ୍ ହ୍ୟାଣ୍ଡେଲ୍ ଲଗାନ୍ତୁଏକ ଫିଙ୍ଗର-ଗ୍ରୁଭ୍ ହ୍ୟାଣ୍ଡେଲ୍ ଯୋଡ଼ନ୍ତୁ, ଯାହାଦ୍ୱାରା ଏହାର ଗ୍ରୁଭ୍ ଶଟରରେ କଟା ହେବ ଏବଂ କାର୍କାସ୍ ସମନ୍ୱୟ ହେବ — ବେସ୍ ୟୁନିଟ୍, ଟଲ୍ ୟୁନିଟ୍ ଏବଂ ଡ୍ରୟର ସବୁଥିରେ।
- ହାର୍ଡୱେର ନିୟମ ମାଧ୍ୟମରେ ପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ ସହିତ ସାଇଟ ହାର୍ଡୱେର ସଂଲଗ୍ନ କରନ୍ତୁଏମିତି ହାର୍ଡୱେର ନିୟମ ସୃଷ୍ଟି କରନ୍ତୁ ଯାହା ପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ ଏବଂ ୱାର୍ଡରୋବ ସହିତ ସଠିକ୍ ହାର୍ଡୱେର ସଂଲଗ୍ନ କରେ, ତାପରେ ନିୟମକୁ ସଫା କରି ସକ୍ରିୟ କରି ହିଞ୍ଜ ସେଟ୍ ଅପ୍ କରନ୍ତୁ।
- ଏକାସାଙ୍ଗରେ ଅନେକ କ୍ୟାବିନେଟର ହ୍ୟାଣ୍ଡେଲ ପରିବର୍ତ୍ତନ କରନ୍ତୁକ୍ୟାବିନେଟଗୁଡ଼ିକୁ ମଲ୍ଟି-ସିଲେକ୍ଟ କରନ୍ତୁ ଏବଂ ସେମାନଙ୍କ ହ୍ୟାଣ୍ଡେଲ ଏକାସାଙ୍ଗରେ ପରିବର୍ତ୍ତନ କରିବା ପାଇଁ ପ୍ରପର୍ଟି ପ୍ୟାନେଲରେ 'modify handle' ବିକଳ୍ପ ବ୍ୟବହାର କରନ୍ତୁ।
- ୟୁନିଟ୍ କନଫିଗୁରେସନରେ ୱାର୍ଡରୋବ ଶଟର ପ୍ରକାର ଚୟନ କରନ୍ତୁନିଜେ ମଡେଲିଂ ନକରି ୟୁନିଟ୍ କନଫିଗୁରେସନରେ ଉପଲବ୍ଧ ଶଟର ପ୍ରକାରଗୁଡ଼ିକରୁ ଆପଣଙ୍କୁ ଆବଶ୍ୟକ ଶଟର ବ୍ୟବସ୍ଥା ବାଛନ୍ତୁ।
- ପାର୍ଟିସନ ଏବଂ ୱାର୍ଡରୋବ ମଧ୍ୟରେ ସେଲ୍ଫ ରିଭିଲ ପରିଚାଳନା କରନ୍ତୁସେଲ୍ଫ ରିଭିଲ କିପରି ନେଷ୍ଟେଡ ପାର୍ଟିସନ ପର୍ଯ୍ୟନ୍ତ ପହଞ୍ଚେ ଏବଂ ଏକାସାଙ୍ଗରେ ଅନେକ ୱାର୍ଡରୋବରେ ଏହା କିପରି ଲାଗୁ କରିବେ ତାହା ବୁଝନ୍ତୁ।
- ଗୋଟିଏ ୟୁନିଟ୍ର ନିର୍ମାଣରୁ ଏକ ପ୍ୟାନେଲ୍ ହଟାନ୍ତୁକେବଳ ମନୋନୀତ କ୍ୟାବିନେଟ୍ରେ ତଳ କିମ୍ବା ପଛ ଭଳି ଏକ ପ୍ୟାନେଲ୍ ବନ୍ଦ କରନ୍ତୁ, କମ୍ପୋନେଣ୍ଟ ଡେଫିନିସନ୍କୁ ସ୍ପର୍ଶ ନକରି।
- Set drawer side reductions and fascia extensions in a drawer unitAdjust a drawer's own panel reductions and extensions to resize and reshape its fascia in a 3 Drawer Unit.
- ଏଲିଭେସନ ପସନ୍ଦରେ ଶଟର ଦିଗ, ୟୁନିଟ ଏବଂ ସେଲ୍ଫ ଆନୋଟେସନ ଟୋଗଲ କରନ୍ତୁଏଲିଭେସନ ପସନ୍ଦରେ ଶଟର ଦିଗ, ୟୁନିଟ ଆନୋଟେସନ ଏବଂ ସେଲ୍ଫ ଆନୋଟେସନ ଚାଲୁ କିମ୍ବା ବନ୍ଦ କରି କେଉଁ ଏଲିଭେସନ ଆନୋଟେସନ ଦେଖାଯିବ ତାହା ନିୟନ୍ତ୍ରଣ କରନ୍ତୁ।
- ୱାର୍ଡରୋବରେ ପୃଥକ ପାର୍ଟିସନ ସହିତ କାମ କରନ୍ତୁବିଭାଜିତ ୱାର୍ଡରୋବର ପ୍ରତ୍ୟେକ ପାର୍ଟିସନକୁ ଅଲଗା ଭାବରେ ଚୟନ କରନ୍ତୁ, ଯାହାଫଳରେ ଆପଣ କେବଳ ଗୋଟିଏ ଜୋନରେ ଏକ ସଟର ଯୋଡ଼ିପାରିବେ କିମ୍ବା ଅନ୍ୟଗୁଡ଼ିକୁ ସ୍ପର୍ଶ ନକରି ଏହାର ସେଲଫଗୁଡ଼ିକୁ ପରିବର୍ତ୍ତନ କରିପାରିବେ।
- Add a horizontal custom panel at cabinet level and rotate itAdd a top panel to a cabinet using cabinet-level custom panel, then add a horizontal custom panel and place it anywhere.
- ସ୍ଲାଇଡିଂ ୱାର୍ଡରୋବରେ ଡ୍ରୟର ସେଟ୍ ଯୋଡ଼ନ୍ତୁଆପଣଙ୍କ ଡିଜାଇନରେ ଏକ ସ୍ଲାଇଡିଂ ୱାର୍ଡରୋବ ପାଇଁ ଡ୍ରୟର ସେଟ୍ କନଫିଗର କରନ୍ତୁ।
- ଏକ ୟୁନିଟର ଉଭୟ ପାଖରେ Add drawersପ୍ରଥମେ ଏକ ଭର୍ଟିକାଲ ପ୍ୟାନେଲ ଯୋଡ଼ନ୍ତୁ, ତାପରେ ପ୍ରତ୍ୟେକ ପାଖରେ ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁ, ଯାହାଫଳରେ ୟୁନିଟର ଉଭୟ ପାଖରେ ଡ୍ରୟର ରହିପାରିବ।
- କ୍ୟାବିନେଟ ଜୋନ ଭିତରେ ପାର୍ଟିସନ ଏବଂ ଗ୍ଲାସ ଯୋଡ଼ନ୍ତୁକ୍ୟାବିନେଟ ଜୋନ ଭିତରର ଖାଲି ସ୍ଥାନରେ ପାର୍ଟିସନ ଯୋଡ଼ି କ୍ୟାବିନେଟର ଭିତର ଭାଗକୁ ସମାନ ଭାବରେ ବିଭକ୍ତ କରନ୍ତୁ।
- ଏକ କ୍ୟାବିନେଟରେ ଏକ ଶଟର ସିଷ୍ଟମ ଲଗାନ୍ତୁଏକ ସ୍ୱିଙ୍ଗ, ସ୍ଲାଇଡିଂ କିମ୍ବା ଲିଫ୍ଟ-ଅପ୍ ଶଟର ସିଷ୍ଟମ ବାଛନ୍ତୁ ଏବଂ customize ଟ୍ୟାବରୁ ଏହାକୁ ଏକ କ୍ୟାବିନେଟରେ ଲଗାନ୍ତୁ।
- Modify Countertop ସହିତ ଏକାଧିକ ୟୁନିଟ୍ରେ ଏକ କାଉଣ୍ଟରଟପ୍ ଲଗାନ୍ତୁଏକାଧିକ କ୍ୟାବିନେଟ୍ ଚୟନ କରନ୍ତୁ ଏବଂ ଏକ ପପ୍-ଅପ୍ରେ ସେମାନଙ୍କ କାଉଣ୍ଟରଟପ୍ ମୋଟେଇ ଓ ସାମଗ୍ରୀ ଏକତ୍ର ସେଟ୍ କରନ୍ତୁ।
- ଲାମିନେଟ୍ ସଲିଡ୍ ବ୍ୟବହାର କରି କାଉଣ୍ଟରଟପ୍ ଏବଂ କ୍ୟାବିନେଟ୍ ସାମଗ୍ରୀ ପରିବର୍ତ୍ତନ କରନ୍ତୁକାଉଣ୍ଟରଟପ୍ ପରିବର୍ତ୍ତନ କରି ଏବଂ ପରିବର୍ତ୍ତନଗୁଡ଼ିକ ପ୍ରୟୋଗ କରି ସାମଗ୍ରୀ ପରିବର୍ତ୍ତନକୁ ନିଶ୍ଚିତ କରନ୍ତୁ।
- ଏକାଧିକ ୟୁନିଟ୍ର ହ୍ୟାଣ୍ଡେଲ ଓ ମ୍ୟାଟେରିଆଲ ଏକାସାଙ୍ଗେ ବଦଳାନ୍ତୁକେତେକ ୟୁନିଟ୍ ଏକାସାଙ୍ଗେ ଚୟନ କରନ୍ତୁ ଏବଂ change material / interchange ନିୟନ୍ତ୍ରଣ ସହିତ ଏକ କାର୍ଯ୍ୟରେ ସେମାନଙ୍କ ଫିନିଶ ବଦଳାନ୍ତୁ।
- ସମଗ୍ର ଡିଜାଇନ୍ ଏବଂ ଭବିଷ୍ୟତର କ୍ୟାବିନେଟ୍ ବଦଳାଇବା ପାଇଁ ଏକ କନେକ୍ଟର କାର୍ଡ ସମ୍ପାଦନ କରନ୍ତୁମୂଳ କନେକ୍ଟର ସମ୍ପାଦନ କରନ୍ତୁ ଯାହାଫଳରେ ସମଗ୍ର ଡିଜାଇନ୍ ଏବଂ ଭବିଷ୍ୟତର କ୍ୟାବିନେଟ୍ ପରିବର୍ତ୍ତିତ ହେବ।
- ଏକ ପ୍ୟାନେଲ ଆକାରକୁ ସ୍ଥିର କରନ୍ତୁ ଯାହାଫଳରେ ଏହା ୟୁନିଟ୍ ସହିତ ଆକାର ବଦଳାଇବା ବନ୍ଦ କରେଏକ ପ୍ୟାନେଲର ଲମ୍ବ, ଗଭୀରତା କିମ୍ବା ଉଚ୍ଚତାକୁ ଏକ ସ୍ଥିର ମୂଲ୍ୟରେ ସେଟ୍ କରନ୍ତୁ ଯାହାଫଳରେ କ୍ୟାବିନେଟ୍ କିମ୍ବା ୱାର୍ଡରୋବର ଆକାର ବଦଳାଇଲେ ସେହି ପ୍ୟାନେଲର ଆକାର ଅପରିବର୍ତ୍ତିତ ରହେ।
- କ୍ୟାବିନେଟ୍ ଉଚ୍ଚତା ସହିତ ହିଞ୍ଜ ସଂଖ୍ୟା ଏବଂ ସ୍ଥିତି କିପରି ବଦଳେକ୍ୟାବିନେଟ୍ ଉଚ୍ଚତା ପରିସର ଅନୁସାରେ ହାର୍ଡୱେର୍ ନିୟମ କିପରି ହିଞ୍ଜ ସଂଖ୍ୟା ଓ ସ୍ଥାପନ ସ୍ଥିର କରେ ଏବଂ ଉଚ୍ଚତା ବଦଳିଲେ ସେଗୁଡ଼ିକ ସ୍ୱୟଂଚାଳିତ ଭାବେ ଅପଡେଟ୍ ହୁଏ ତାହା ଜାଣନ୍ତୁ।
- କ୍ୟାବିନେଟରେ ଏକ କଷ୍ଟମ ପ୍ୟାନେଲ ରଖନ୍ତୁକାଟାଲଗରୁ କିମ୍ବା Add Custom Panel ସହିତ ଏକ କଷ୍ଟମ ପ୍ୟାନେଲ ଯୋଡ଼ନ୍ତୁ, ଡ୍ୟାସ୍ ଆଉଟଲାଇନ ଅନୁସରଣ କରନ୍ତୁ ଏବଂ ସ୍ଥାପନ କରିବାକୁ କ୍ଲିକ କରନ୍ତୁ।
- ଖୋଲା ୟୁନିଟ୍ଗୁଡ଼ିକ ପାଇଁ ଏଣ୍ଡ ପ୍ୟାନେଲ୍ ଗଭୀରତା କାର୍କାସ୍ ସ୍ତରକୁ ସେଟ୍ କରନ୍ତୁଯେଉଁ ଟପ୍ ୟୁନିଟ୍ରେ ଶଟର ନାହିଁ, ସେଥିରେ ଏଣ୍ଡ ପ୍ୟାନେଲ୍କୁ କାର୍କାସ୍ ସ୍ତରରେ ଅଟକାନ୍ତୁ, ଯାହାଫଳରେ ଏହା କାର୍କାସ୍ ସହିତ ସମାନ୍ତର ହେବ।
- ଗ୍ଲୋବାଲ ପ୍ରିଫରେନ୍ସରେ କ୍ୟାବିନେଟ ଓ ୱାର୍ଡରୋବ ପାଇଁ ପ୍ରୋଜେକ୍ଟ ମାନକ ସେଟ କରନ୍ତୁପ୍ରୋଜେକ୍ଟ ସ୍ତରରେ ମୂଳ ସାମଗ୍ରୀ, ଫିନିଶ, ଶଟର ଓ ହ୍ୟାଣ୍ଡେଲ ଥରେ ସେଟ କରନ୍ତୁ, ଯାହାଫଳରେ ପରେ ଯୋଡ଼ାଯାଉଥିବା ପ୍ରତ୍ୟେକ କ୍ୟାବିନେଟ ଓ ୱାର୍ଡରୋବ ସେହି ମାନକକୁ ଡିଫଲ୍ଟ ଭାବରେ ନେବ।
- ବ୍ଲାଇଣ୍ଡ କର୍ଣ୍ଣର କ୍ୟାବିନେଟରେ ଶଟର ପ୍ରସ୍ଥ ସେଟ କରନ୍ତୁବ୍ଲାଇଣ୍ଡ କର୍ଣ୍ଣର କ୍ୟାବିନେଟର ଶଟର ପ୍ରସ୍ଥ ଏହାର କ୍ୟାବିନେଟ ପ୍ରସ୍ଥ, ଗଭୀରତା ଓ ଉଚ୍ଚତା ସହିତ କେଉଁଠି ଅଛି ଦେଖନ୍ତୁ।
- ପାର୍ଟିସନ ବୁଝନ୍ତୁ ଏବଂ ଏକ କ୍ୟାବିନେଟ ଭିତରେ ସେଲ୍ଫ, ପ୍ୟାନେଲ କିମ୍ବା ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁInfurnia ରେ ପାର୍ଟିସନ କ'ଣ ତାହା ଜାଣନ୍ତୁ ଏବଂ ପାର୍ଟିସନ ସ୍ତରରେ ସେଲ୍ଫ, ଭର୍ଟିକାଲ ପ୍ୟାନେଲ କିମ୍ବା ଡ୍ରୟର ଯୋଡ଼ନ୍ତୁ।
- ୱାଲ୍ ୟୁନିଟ୍ ପାଇଁ ୱାଲ୍ ଗୋଲା ପ୍ରୋଫାଇଲ୍ ବ୍ୟବହାର କରନ୍ତୁ, ବେସ୍ ପ୍ରୋଫାଇଲ୍ ନୁହେଁୱାଲ୍ କ୍ୟାବିନେଟ୍ରେ ଗୋଲା ପ୍ରୋଫାଇଲ୍ ଯୋଡ଼ିବା ସମୟରେ ୱାଲ୍ ଗୋଲା ପ୍ରୋଫାଇଲ୍ ବାଛନ୍ତୁ, କାରଣ ବେସ୍ ପ୍ରୋଫାଇଲ୍ ୱାଲ୍ ୟୁନିଟ୍ ପାଇଁ ଉପଯୁକ୍ତ ନୁହେଁ।
- ଆଧାର କିମ୍ବା ୱାଲ୍ ୟୁନିଟ୍ ଉପରେ ସ୍କର୍ଟିଂ ଏବଂ ପେଲମେଟ୍ ବିକଳ୍ପ କାହିଁକି ନିର୍ଭର କରେଏକ କ୍ୟାବିନେଟ୍ର ମାଉଣ୍ଟିଂ ପ୍ଲେନ୍ ଏହାକୁ ଆଧାର କିମ୍ବା ୱାଲ୍ ୟୁନିଟ୍ ଭାବରେ କିପରି ସ୍ଥିର କରେ ଏବଂ ଏହା ଦ୍ୱାରା କେଉଁ ସ୍କର୍ଟିଂ, ପେଲମେଟ୍, କର୍ନିସ୍ ଏବଂ ରେଲ୍ ବିକଳ୍ପ ମିଳେ ତାହା ଜାଣନ୍ତୁ।
- Add a parametric custom panel inside a unit via constructionAdd a horizontal top panel inside a unit and drive its size and position with parametric formulas.
- ରୋଷେଇ ଆସବାବପତ୍ର କାଟାଲଗରୁ ବେସ୍, ୱାଲ୍ ଏବଂ ଟଲ୍ ୟୁନିଟ୍ ଯୋଡ଼ନ୍ତୁକୋଠରୀକୁ ରୋଷେଇ ଘର ଭାବରେ ଚିହ୍ନିତ କରନ୍ତୁ, ଯାହାଫଳରେ Insert / Furnish ଅଧୀନରେ ରୋଷେଇ ଆସବାବପତ୍ରରେ ଥିବା ବେସ୍, ୱାଲ୍ ଏବଂ ଟଲ୍ ୟୁନିଟ୍ ସହଜରେ ମିଳିପାରିବ।
- କ୍ୟାବିନେଟ୍ ନିର୍ମାଣରେ ଏକ ଏଣ୍ଡ ପ୍ୟାନେଲ୍ ଯୋଡ଼ନ୍ତୁ କିମ୍ବା ହଟାନ୍ତୁନିର୍ବାଚିତ ୟୁନିଟ୍ର କ୍ୟାବିନେଟ୍ ନିର୍ମାଣ ସେଟିଂସ୍ରୁ ଏକ ବାମ କିମ୍ବା ଡାହାଣ ଏଣ୍ଡ ପ୍ୟାନେଲ୍ ଯୋଡ଼ନ୍ତୁ କିମ୍ବା ହଟାନ୍ତୁ।
- ୱାର୍ଡରୋବ ନିର୍ମାଣ ଅଧୀନରେ ସ୍କର୍ଟିଂ ଉଚ୍ଚତା ଏବଂ ସଟର ସିଷ୍ଟମ ସମାୟୋଜିତ କରନ୍ତୁୱାର୍ଡରୋବ ନିର୍ମାଣ ବିକଳ୍ପ ଅଧୀନରେ ତୃତୀୟ ଟ୍ୟାବରୁ ୱାର୍ଡରୋବ ଏବଂ ମାନକ କ୍ୟାବିନେଟ ପାଇଁ ସ୍କର୍ଟିଂ ଉଚ୍ଚତା କିମ୍ବା ସଟର ସିଷ୍ଟମ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- ସମଗ୍ର କ୍ୟାବିନେଟ୍ ପ୍ରସ୍ଥରୁ କାର୍କାସ୍ ପ୍ରସ୍ଥ ଗଣନା କରନ୍ତୁସମଗ୍ର କ୍ୟାବିନେଟ୍ ପ୍ରସ୍ଥ ନେଇ ତାହାରୁ ଦୁଇଗୁଣ କାର୍କାସ୍ ପ୍ୟାନେଲ୍ ମୋଟେଇ ବିୟୋଗ କରି କାର୍କାସ୍ ପ୍ରସ୍ଥ ନିର୍ଣ୍ଣୟ କରନ୍ତୁ।
- କ୍ୟାବିନେଟର ସମ୍ପୂର୍ଣ୍ଣ ଉଚ୍ଚତା ଗଣନା କରନ୍ତୁଉପାଦାନଗୁଡ଼ିକୁ ସମାନ୍ତର କରିବା ପାଇଁ ମୋଟ ଉଚ୍ଚତା ପାଇବାକୁ କ୍ୟାବିନେଟ ଉଚ୍ଚତା, ସ୍କର୍ଟିଂ ଉଚ୍ଚତା ଏବଂ କାଉଣ୍ଟରଟପ ମୋଟେଇ ଯୋଡ଼ନ୍ତୁ।
- ଚୟନ ଟ୍ରି କିମ୍ବା ୟୁନିଟ୍ ମାଧ୍ୟମରେ କାଉଣ୍ଟରଟପ୍ ସାମଗ୍ରୀ ପରିବର୍ତ୍ତନ କରନ୍ତୁୟୁନିଟ୍ ଚୟନ କରି କିମ୍ବା ଚୟନ ଟ୍ରି ବ୍ୟବହାର କରି, ତାପରେ ଏକ ଉପବର୍ଗ ଏବଂ ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ ସାମଗ୍ରୀ କିମ୍ବା ରଙ୍ଗ ବାଛି କାଉଣ୍ଟରଟପ୍ର ସାମଗ୍ରୀ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- ଏକକ ୟୁନିଟ୍ କ୍ୟାମ୍ ମୋଡ୍ରେ ପ୍ୟାନେଲ୍-ରୁ-ପ୍ୟାନେଲ୍ ସଂଯୋଗ ଯାଞ୍ଚ କରନ୍ତୁଏକ କ୍ୟାବିନେଟ୍ର ପ୍ୟାନେଲ୍ଗୁଡ଼ିକ ମଧ୍ୟରେ ପ୍ରତ୍ୟେକ ସଂଯୋଗ ପରିସ୍ଥିତି, ପ୍ରତ୍ୟେକଟି କେଉଁ କନେକ୍ଟର କାର୍ଡ ବ୍ୟବହାର କରେ ଏବଂ ପ୍ରକୃତ ଡ୍ରିଲ୍ଗୁଡ଼ିକ ଦେଖନ୍ତୁ।
- admin portal ମାଧ୍ୟମରେ ଏକ କ୍ୟାବିନେଟ୍ ଉପରେ କେଉଁ ହାର୍ଡୱେର୍ ନିୟମ ଲାଗୁ ହୁଏ ତାହା ଯାଞ୍ଚ କରନ୍ତୁଏକ କ୍ୟାବିନେଟ୍ ଉପରେ ଲାଗୁ ହେଉଥିବା ହାର୍ଡୱେର୍ ନିୟମଗୁଡ଼ିକ ଖୋଜନ୍ତୁ ଏବଂ ସେଗୁଡ଼ିକର ସର୍ତ୍ତ ଓ ସେମାନେ ଯୋଡ଼ୁଥିବା ହାର୍ଡୱେର୍ ଦେଖନ୍ତୁ।
- ଆପଣ ରଖୁଥିବା ୟୁନିଟ୍ ପ୍ରକାର ପାଇଁ ସଠିକ୍ ପସନ୍ଦ ଗ୍ରୁପ୍ ବାଛନ୍ତୁରଖାଯାଉଥିବା ୟୁନିଟ୍ ପ୍ରକାର ସହିତ ମେଳ ଖାଉଥିବା ପସନ୍ଦ ଗ୍ରୁପ୍ ବାଛନ୍ତୁ, ଯାହାଫଳରେ ବେସ୍ ୟୁନିଟ୍, ୱାଲ୍ ୟୁନିଟ୍, ଲଫ୍ଟ ଏବଂ ମଲ୍ଟି-ପର୍ପୋଜ ୟୁନିଟ୍ କ୍ୟାବିନେଟ୍ ପସନ୍ଦ ବ୍ୟବହାର କରିବ ଏବଂ ୱାର୍ଡରୋବ୍ ୱାର୍ଡରୋବ୍ ପସନ୍ଦ ବ୍ୟବହାର କରିବ।
- ଏକ କ୍ୟାବିନେଟ୍ରୁ ଆରମ୍ଭ କରି କଷ୍ଟମ୍ କିମ୍ବା ସେକ୍ସନାଲ୍ ଏଲିଭେସନ୍ ତିଆରି କରନ୍ତୁକଷ୍ଟମ୍ କିମ୍ବା ସେକ୍ସନାଲ୍ ଏଲିଭେସନ୍ ତିଆରି କରିବା ପାଇଁ ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ କ୍ୟାବିନେଟ୍ରୁ ଏଲିଭେସନ୍ ଆରମ୍ଭ କରନ୍ତୁ।
- ଦୁଇଟି ୟୁନିଟ୍ ମଧ୍ୟରେ ଏକ ଭର୍ଟିକାଲ୍ ଗୋଲା ହ୍ୟାଣ୍ଡେଲ୍ କିପରି ଅଂଶୀଦାର ହୁଏଏକ ଭର୍ଟିକାଲ୍ ଗୋଲା ହ୍ୟାଣ୍ଡେଲ୍ କିପରି ଦୁଇଟି ସଂଲଗ୍ନ ୟୁନିଟ୍କୁ ସଂଯୋଗ କରେ, ଉଭୟ ସାଇଡ୍ ପ୍ୟାନେଲ୍ରେ ରିସେସ୍ କରେ, ଏବଂ ଏହା ଅପସାରିତ ହେଲେ କଣ ହୁଏ ଦେଖନ୍ତୁ।
- How countertops affect displayed base unit heightLearn why adding or removing a countertop on a base unit never changes the carcass height shown for that unit.
- କ୍ୟାବିନେଟ ତଳେ କଷ୍ଟମ ପ୍ୟାନେଲ କିପରି ତାଲିକାଭୁକ୍ତ ହୁଏଆପଣ ଏହାକୁ କେଉଁଠି ଯୋଡ଼ୁଛନ୍ତି ତାହା ଉପରେ ନିର୍ଭର କରି ଏକ କଷ୍ଟମ ପ୍ୟାନେଲ କେଉଁ କ୍ୟାବିନେଟ ତଳେ ତାଲିକାଭୁକ୍ତ ହୁଏ ତାହା ଜାଣନ୍ତୁ।
- How panel dimensions are driven by extensions and cabinet adjustmentsLearn how a panel's total thickness is calculated from its core and finishes, and how that calculation differs for pre-laminated and post-laminated core materials.
- କ୍ୟାବିନେଟ୍ର ବାହ୍ୟ ଓ ଆଭ୍ୟନ୍ତରୀଣ ଫିନିଶ୍ ସହିତ ଫିନିଶ୍ ମେଟେରିଆଲ୍ ଲିଙ୍କ୍ କରନ୍ତୁଫିନିଶ୍ ମେଟେରିଆଲ୍ ପ୍ରପର୍ଟିରେ ଏହାର ବାହ୍ୟ ଓ ଆଭ୍ୟନ୍ତରୀଣ ଫିନିଶ୍ ମେଟେରିଆଲ୍ ଲିଙ୍କ୍ କରି ଏକ କ୍ୟାବିନେଟ୍ରେ ଫିନିଶ୍ ଲଗାନ୍ତୁ।
- ୟୁନିଟ୍ରେ ଏକ ଖୋଲା ସାଇଡ୍ ପ୍ୟାନେଲ୍ ସେଟ୍ କରନ୍ତୁୟୁନିଟ୍କୁ ପ୍ୟାନେଲ୍ ସ୍ତରରେ ଖୋଲନ୍ତୁ ଏବଂ ସେହି ପ୍ୟାନେଲ୍କୁ ଖୋଲା ପ୍ୟାନେଲ୍ରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁ, କାରଣ ଏହାକୁ ୟୁନିଟ୍ ସ୍ତରର ଡିଫଲ୍ଟ ଭାବରେ ସେଟ୍ କରାଯାଇପାରିବ ନାହିଁ।
- କ୍ୟାବିନେଟ ରଖିବା ପୂର୍ବରୁ କାର୍କାସ କୋର ଏବଂ ପଛ-ପ୍ୟାନେଲ ସାମଗ୍ରୀର ଡିଫଲ୍ଟ ସେଟ କରନ୍ତୁକ୍ୟାବିନେଟ-ସ୍ତରୀୟ ପସନ୍ଦରେ କାର୍କାସ କୋର ଏବଂ ପଛ-ପ୍ୟାନେଲ କୋର ସାମଗ୍ରୀ ବାଛନ୍ତୁ, ଯାହାଫଳରେ ନୂଆ କ୍ୟାବିନେଟ ସେହି ସାମଗ୍ରୀ ସହିତ ଯୋଡ଼ାଯିବ।
- ଗୋଲା ଏବଂ G-ପ୍ରୋଫାଇଲ କ୍ୟାବିନେଟ ପାଇଁ ଉପର ପ୍ୟାନେଲର ଆକାର ନିର୍ଣ୍ଣୟ କରନ୍ତୁଗୋଲା ପ୍ରୋଫାଇଲ କିପରି ଉପର ପ୍ୟାନେଲକୁ ପଛ ଆଡ଼କୁ ଅଫସେଟ କରେ ଏବଂ G-ପ୍ରୋଫାଇଲ ଏହାକୁ କାର୍କାସ ଆକାରରେ ରଖେ, ତାହା ଜାଣନ୍ତୁ।
- କୋଣୀୟ କ୍ୟାବିନେଟ୍ ଆକୃତି ପାଇଁ କଷ୍ଟମ୍ ପ୍ୟାନେଲ୍ ବ୍ୟବହାର କରନ୍ତୁମାନକ କ୍ୟାବିନେଟ୍ ପ୍ୟାନେଲ୍ ଘୂର୍ଣ୍ଣନ କରିବା ପରିବର୍ତ୍ତେ ଏକ ଅଲଗା କଷ୍ଟମ୍ ପ୍ୟାନେଲ୍ ବ୍ୟବହାର କରି କୋଣୀୟ କିମ୍ବା ଅଣ-ମାନକ କ୍ୟାବିନେଟ୍ ଆକୃତି ସୃଷ୍ଟି କରନ୍ତୁ।
- Add a custom end panel to a cabinetAdd a custom end panel to a cabinet and it extends on whichever side you add it.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- Add bottom support panels under a wardrobeSet the count and height of bottom support panels so they stand evenly under the cabinet bottom in the plinth zone.
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Add or change a back panel on an appliance unitAppliance units come with an open back by default so heat can radiate, and you can add or change a closed or coloured back panel in the open part of the construction.
- Add partition configuration for double-shutter wardrobes with both-side fillerAdd a partition configuration from partition level under construction for a double-shutter wardrobe, choosing from default configurations such as left-side, right-side and both-side filler.
- Add props at partition level so they move with the cabinetAdd props at partition level so they travel with the cabinet, then fine-tune their position in the furniture layer with X, Y and Z offsets.
- Add skirting and extra end panels from cabinet constructionConfigure skirting on a unit and add an extra left or right end panel from the cabinet's Construction tab.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- Apply skirting visibility to new unitsTurn on the skirting visibility preference so the front, left, right and back skirting show/hide state is applied to each unit when it is added.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- କ୍ୟାବିନେଟ୍ ପାଇଁ ସଠିକ୍ ବାମ କିମ୍ବା ଡାହାଣ ଏଣ୍ଡ ପ୍ୟାନେଲ୍ ବାଛନ୍ତୁକ୍ୟାବିନେଟ୍ରେ ଏକ ବାମ କିମ୍ବା ଡାହାଣ ଏଣ୍ଡ ପ୍ୟାନେଲ୍ ଯୋଡ଼ନ୍ତୁ, ଏହା ଜାଣି ରଖନ୍ତୁ ଯେ ୟୁନିଟ୍ର ଶଟର୍ଗୁଡ଼ିକୁ ସାମ୍ନା କରି ପାର୍ଶ୍ୱ ନିର୍ଣ୍ଣୟ କରାଯାଏ।
- Configure front and back skirting on a wardrobeChoose whether a wardrobe has front and back skirting.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find which hardware rule is applied to a cabinetOpen the cabinet and check Construction > Automation History to see which hardware rule added each hardware item.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.
- ପ୍ରତି ୟୁନିଟ୍ ପାଇଁ ଅଟୋମେସନ୍ ନିୟମ କିପରି ଚାଲେ ଏବଂ ପୁନଃ ପ୍ରୟୋଗ ହୁଏପ୍ରତି ୟୁନିଟ୍ ପାଇଁ ଅଟୋମେସନ୍ ନିୟମ କିପରି ମୂଲ୍ୟାଙ୍କନ ହୁଏ, ପ୍ରତ୍ୟେକ ରନ୍ରେ ରିସେଟ୍ ଓ ପୁନଃ ପ୍ରୟୋଗ ହୁଏ, ଏବଂ କେଉଁ ୟୁନିଟ୍ ଓ ପ୍ୟାନେଲ୍ ଛାଡ଼ି ଦିଆଯାଏ ତାହା ଜାଣନ୍ତୁ।
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 3D ଦୃଶ୍ୟରେ ଏକ ୟୁନିଟ୍ ଅଲଗା କରନ୍ତୁ ଏବଂ QC କୁ ଏକ ରୁମ୍କୁ ସୀମିତ କରନ୍ତୁକାନ୍ଥ ବାଧା ନ ଦେଇ ଏକ ୟୁନିଟ୍କୁ ନିକଟରୁ ନିରୀକ୍ଷଣ କରନ୍ତୁ, ତାପରେ ଏହାକୁ ନିଜସ୍ୱ ୱାର୍କ ସ୍କୋପ୍ ଦେଇ କେବଳ ଗୋଟିଏ ରୁମ୍ ପାଇଁ QC ଚଲାନ୍ତୁ।
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Place a single vertical partition at the centre of a unitAdd one vertical panel to a unit and it positions at the centre automatically, then adjust the distance manually if the placement is slightly off.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Remove back panel behind appliances at cabinet levelAppliance units normally have no back panel by default, so no extra step is needed for them.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Understand partition selection levels in a cabinetSee how clicking a partition highlights the clicked part and its parent level so you can tell which level of the cabinet you selected.
- Understand what a carcass is in a cabinetLearn which panels make up a carcass and how it can be modified to build any cabinet type.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
ଅଧିକ ଗାଇଡ୍ 10
ସବୁ ଦେଖାନ୍ତୁ (10)
- ବଲ୍କ ଏଡିଟ୍ ସ୍ଟ୍ରକ୍ଚର ମାଧ୍ୟମରେ ନିର୍ମାଣ ଓ ଉତ୍ପାଦନ ସେଟିଂସ୍ ଲାଗୁ କରନ୍ତୁବଲ୍କ ଏଡିଟ୍ ସ୍ଟ୍ରକ୍ଚର ବିକଳ୍ପ ବ୍ୟବହାର କରି କ୍ୟାବିନେଟ୍ ଓ ୱାର୍ଡ୍ରୋବରେ ନିର୍ମାଣ ଓ ଉତ୍ପାଦନ ବିନ୍ୟାସ ସେଟିଂସ୍ ଲାଗୁ କରନ୍ତୁ।
- ଆଡମିନ-ପୋର୍ଟାଲ ନିୟମ ଦ୍ୱାରା କିମ୍ବା ମାନୁଆଲୀ ଭାବରେ କନେକ୍ଟର ଯୋଡ଼ନ୍ତୁadmin portal ରେ ଏକ ନିୟମ ପରିଭାଷିତ କରି ଯୋଡ଼ନ୍ତୁ, ଯାହାଫଳରେ ମେଳ ଖାଉଥିବା ଆମଦାନୀ ହୋଇଥିବା କ୍ୟାବିନେଟଗୁଡ଼ିକ ସ୍ୱଚାଳିତ ଭାବରେ ନିୟମର କନେକ୍ଟର ପାଇବେ, କିମ୍ବା ସେଗୁଡ଼ିକୁ ମାନୁଆଲୀ ଭାବରେ ଯୋଡ଼ନ୍ତୁ।
- ଗୋଲା ଏବଂ ପ୍ରୋଫାଇଲ ରଖିବାକ୍ୟାବିନେଟ ମଡେଲିଂରେ ଗୋଲା ଏବଂ ପ୍ରୋଫାଇଲ କେଉଁଠି ଲଗାଯାଏ ଏବଂ ଉଭୟ ଏକ ହିଁ କ୍ୟାବିନେଟରେ କିପରି ଦେଖାଯାଇପାରେ ତାହା ଶିଖନ୍ତୁ।
- କନଷ୍ଟ୍ରକ୍ସନ କଷ୍ଟମାଇଜ୍ ମାଧ୍ୟମରେ ଏକ ହ୍ୟାଙ୍ଗିଂ ରୁଟ୍ ଯୋଡ଼ନ୍ତୁୱାର୍ଡରୋବରେ ଏକ ହ୍ୟାଙ୍ଗିଂ ରୁଟ୍ ଯୋଡ଼ିବା ପାଇଁ ଉପରେ କନଷ୍ଟ୍ରକ୍ସନ କଷ୍ଟମାଇଜେସନ୍ ଖୋଲନ୍ତୁ, ହ୍ୟାଙ୍ଗିଂ ରୁଟ୍ ବିକଳ୍ପ ଚୟନ କରନ୍ତୁ ଏବଂ କାଟାଲଗରୁ ଏହାକୁ ବାଛନ୍ତୁ।
- Quick Access, Customize ଏବଂ Construction ମଧ୍ୟରୁ ବାଛନ୍ତୁଆପଣ ଯେଉଁ ପରିବର୍ତ୍ତନ କରିବାକୁ ଚାହାନ୍ତି, ସେଥିପାଇଁ ଉପଯୁକ୍ତ cabinet କଷ୍ଟମାଇଜେସନ ମେନୁ ବାଛନ୍ତୁ — ସାଧାରଣ ପରିବର୍ତ୍ତନ ହେଉ କିମ୍ବା ଉପାଦାନ ଯୋଡ଼ିବା ହେଉ।
- Fix a red bounding box that shows overlap after snappingUnderstand why a red bounding box can appear even when units snap correctly.
- Let standard fittings auto-adjust on height or depth changeChange a unit's height or depth and let the software automatically adjust standard fittings such as hinges, minifix and shelves.
- ସୂଚୀ, ମିଶ୍ରିତ BOQ ଏବଂ ସୂଚୀ ଟେମ୍ପଲେଟ୍ ବୁଝନ୍ତୁସୂଚୀ-ଆଧାରିତ ଆଉଟପୁଟ୍ ଗୁଡ଼ିକ ଲୁକ୍କାୟିତ ଏବଂ ୱାର୍କସ୍କୋପ୍-ବାଦ ଦିଆଯାଇଥିବା ଉପାଦାନଗୁଡ଼ିକୁ କିପରି ବ୍ୟବହାର କରେ, କ୍ୟାବିନେଟ୍ ମିଶ୍ରିତ BOQ କିପରି ପ୍ରିଣ୍ଟ ହୁଏ, ଏବଂ ସୂଚୀଗୁଡ଼ିକୁ କିପରି ସଞ୍ଚୟ ଏବଂ ରପ୍ତାନି କରିବେ ଶିଖନ୍ତୁ।
- Use bulk editing to apply changes across a whole categoryApply a change to an entire category at once instead of editing units one by one.
- Use the MV shortcut to move and place fillersPosition a filler or cabinet precisely by activating the move tool with the MV shortcut.