Set drawer side reductions and fascia extensions in a drawer unit

Adjust a drawer's own panel reductions and extensions to resize and reshape its fascia in a 3 Drawer Unit.

1. In a drawer unit (3 Drawer Unit - M,M,L - 450W, 560D), the side reductions are on the drawer, not the drawer system.

2. A drawer's panel has Reduction > Side with Left / Right / Bottom / Top (1 mm each by default).

3. Setting the drawer's Left reduction 1 -> 1.5 narrowed its fascia at once (448 -> 447.5 mm).

4. On a drawer's fascia panel the panel extension rows work in the panel's own axes: Depth Extension > Back 360 on the upper drawer's fascia extends it downward over the drawer below (y 773..1131 -> 413..1131), which with the lower drawer's fascia hidden makes the lower drawer an internal one.

   ✓ ଅକ୍ଟୋବର 19, 2026 ରେ ପ୍ରଡକ୍ଟରେ ଯାଞ୍ଚ କରାଯାଇଛି

5. In a drawer fascia panel's Construction tab, Extension parameters > Width Extension > Right widens the fascia on that side by the entered value.

   ✓ ଅକ୍ଟୋବର 22, 2026 ରେ ପ୍ରଡକ୍ଟରେ ଯାଞ୍ଚ କରାଯାଇଛି