Create a curved cabinet with a custom panel and panel design edits

Build a curved cabinet by adding a custom panel at cabinet level, sizing it from carcass parameters, and adjusting its offsets so it sits correctly.

1. To build a curved cabinet, add a custom panel at cabinet level.

   ✓ 10 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ

2. Set its size from carcass parameters (e.g. carcass width, carcass depth plus panel thickness) and place it at zero carcass height.

   ✓ 10 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ

3. To add a panel such as one below a loft or above a chimney, go to Furnish and select Custom Panels. Choose a custom panel, place it horizontally, and type the required dimensions (for example length, width and depth) to size it before positioning it in the layout.

   ✓ 19 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ

4. Vertical custom panels can be added and their offsets adjusted so the panel sits below the cabinet level and is hidden from the bottom.

   ✓ 10 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ

5. Custom panels allow any required design to be created and are included in manufacturing outputs, whereas imported models are not.

   ✓ 16 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ