Create a curved cabinet with a custom panel and panel design edits

Build a curved cabinet by adding a custom panel at cabinet level, sizing it from carcass parameters, and adjusting its offsets so it sits correctly.

1. To build a curved cabinet, add a custom panel at cabinet level.

   ✓ 10 اکتوبر، 2026 کو پروڈکٹ میں جانچا گیا

2. Set its size from carcass parameters (e.g. carcass width, carcass depth plus panel thickness) and place it at zero carcass height.

   ✓ 10 اکتوبر، 2026 کو پروڈکٹ میں جانچا گیا

3. To add a panel such as one below a loft or above a chimney, go to Furnish and select Custom Panels. Choose a custom panel, place it horizontally, and type the required dimensions (for example length, width and depth) to size it before positioning it in the layout.

   ✓ 19 اکتوبر، 2026 کو پروڈکٹ میں جانچا گیا

4. Vertical custom panels can be added and their offsets adjusted so the panel sits below the cabinet level and is hidden from the bottom.

   ✓ 10 اکتوبر، 2026 کو پروڈکٹ میں جانچا گیا

5. Custom panels allow any required design to be created and are included in manufacturing outputs, whereas imported models are not.

   ✓ 16 اکتوبر، 2026 کو پروڈکٹ میں جانچا گیا