Create a curved cabinet with a custom panel and panel design edits

Build a curved cabinet by adding a custom panel at cabinet level, sizing it from carcass parameters, and adjusting its offsets so it sits correctly.

1. To build a curved cabinet, add a custom panel at cabinet level.

   ✓ Checked in the product on 10 October 2026

2. Set its size from carcass parameters (e.g. carcass width, carcass depth plus panel thickness) and place it at zero carcass height.

   ✓ Checked in the product on 10 October 2026

3. To add a panel such as one below a loft or above a chimney, go to Furnish and select Custom Panels. Choose a custom panel, place it horizontally, and type the required dimensions (for example length, width and depth) to size it before positioning it in the layout.

   ✓ Checked in the product on 19 October 2026

4. Vertical custom panels can be added and their offsets adjusted so the panel sits below the cabinet level and is hidden from the bottom.

   ✓ Checked in the product on 10 October 2026

5. Custom panels allow any required design to be created and are included in manufacturing outputs, whereas imported models are not.

   ✓ Checked in the product on 16 October 2026