Views, elevations and visibility
Guides: 116
- Understand what elevation auto dimensioning coversSee which cabinet and surrounding elements auto dimensioning measures and which it leaves out.
- Understand what elevation views include and how to fix missing elementsLearn how elevation views auto-close cabinet shutters and doors, which elements they include, and how to bring back anything missing.
- Choose the right elevation for cabinet and island kitchensPick the elevation method that matches your kitchen layout, then add dimensions to the drawing.
- Create elevations from a 3D wall and toggle rich or skeleton viewGenerate an elevation from a wall in the 3D view, then switch between rich view and skeleton view and other display modes.
- Auto dimensioning: per-view behavior and the visible render layer errorLearn how auto dimensioning behaves in elevation and floor plan views, how to add and remove it, and how to fix the visible render layer error.
- Generate an elevation by clicking a wall surfaceClick a wall's surface to generate its elevation automatically, in black-and-white or colour.
- Generate internal and external elevations with dimensionsGenerate internal and external elevations that carry dimensions, with skeleton mode and duplicate elevations available while you work.
- Generate an elevation with the add buttonGenerate an elevation using the add button, which automatically creates the view.
- How opening an elevation view switches your active levelLearn what happens to your active level, version history and view position when you open an elevation view from the views bar.
- Lock a customised view and add it to a presentationLock a customised view so it can be added directly to a presentation, knowing the lock applies only to that specific view.
- Return to an elevation after leaving itGet back to an elevation you left by switching to 3D or floor plan, either from the wall in 3D or from the list beside 3D.
- Run auto dimensioning on a locked elevation viewAdd automatic dimensions to a locked elevation view and fill in anything the automation misses by hand.
- View the floor plan in 2D and the interior in 3D room levelSwitch to 2D mode to see the floor plan, and use the room level in 3D to view the interior with blocking walls hidden and the ceiling visible.
- Calculate the finished elevation of a cabinetAdd cabinet height, skirting height and countertop thickness to get the total elevation for aligning elements.
- Export 3D geometry as glTF and elevations as DWGExport walls, doors and windows as a glTF 3D model, and use DWG only for elevations.
- Export elevations as DWG/DXF and 3D as GLTFExport an elevation as DWG, DXF or DXB at a chosen Acad version, and export 3D views as GLTF with KHR extensions.
- Find drawing tools and switch 2D/3D views in the navigation toolbarUse the navigation toolbar at the top of the design screen to reach all drawing and placement options and to switch between the 2D floor plan and 3D view.
- Fix objects missing from an elevation viewSet the elevation preferences distance value so objects near the wall appear in the wall elevation drawing.
- Hide labels in elevation via furniture/lights label visibilityTurn off label visibility on the selected units to remove their annotation labels from an elevation view.
- Hide or delete carcass panels via panel-level visibilitySwitch off a single carcass panel from the cabinet's Construction > Carcass > Carcass Panels Visibility.
- Hide unedited LHS and RHS fillers instead of deleting themHide left-hand-side and right-hand-side fillers that have not been edited directly in the design rather than deleting them.
- How the Exploded View output PDF is builtSee what the Exploded View output produces and how each unit's diagram, labels and parts chart are laid out.
- Lock the view after finishing dimensions and annotationsLock the view again from settings once dimensions and annotations are added so the completed dimensioning and detailing stays in place.
- Turn on auto snapping to constrain walls to 90 degreesTurn on Orthogonal Snapping so the walls and lines you draw stay at 90 degrees, then join walls with Trim/Extend to Corner.
- Assign annotations and leaders to the relevant layer for easy switchingLearn which layers text boxes and leader lines use by default and how to hide objects with the system hidden layer.
- Assign selected elements to a layer via change drawing layerMove selected items into a layer with the change drawing layer option, then confirm a single cabinet's layer in its customize panel.
- Control layers per view separately from global layersSet each 3D, floor plan, elevation or section view to show only the layers you want, while global layers still control the overall model.
- Control what information is shown with drawing layersUse drawing layers to control what information is shown on a drawing.
- Create a locked section view and add annotationsGenerate a section with the elevation tool, lock it as a view, and add text from the annotate option.
- Create custom layers and assign items to themCreate your own layers in the custom section and move items onto them so you can show, hide and colour them together.
- Draw reference items and annotate labels in plans and elevationsDraw reference items with the draw tools, label them with the annotate tools, and set up layers as needed to complete a drawing.
- Enable Rotate by switching to 3D viewEnter 3D mode from the navbar so the greyed-out Rotate tool becomes available.
- Exclude element types and layers from auto dimensioningControl which elements get dimensioned through the design's elevation preferences and drawing layers.
- Format elevation name text labelsWith the text selected, use the left panel to set bold, underline, alignment, colour and size.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Hide or unhide items using layers in the layer panelHide or show whole groups of items at once by toggling the visibility of the layer they sit on.
- How elements are auto-assigned to global layersEvery element you add is placed on its own global layer automatically, and you can regroup items on a custom layer.
- Isolate a unit in the 3D view and scope QC to one roomInspect a unit up close without walls in the way, then run QC for just one room by giving it its own work scope.
- Know which View options are enabled in each viewCheck which View menu options are available in the 2D floor plan, in an elevation view and outside an elevation.
- Lock a 3D view with plus view to return to your working angleLock your working camera angle, then zoom and navigate freely and return to it instead of resetting the camera by hand.
- Lock elevation views after setting dimensions to preserve themLock an elevation view after adding dimensions and naming it so its settings survive switching to floor plan or 3D.
- Lock the view to preserve the camera positionLock the view to preserve the camera position while navigating.
- Manage global layers from global preferencesOpen the fourth global preferences button to manage system and custom layers, set them global or view-specific, and control rich view with finishes per layer.
- Navigate the 3D view with a long-press of the mouse scroll buttonMove around the 3D view by long-pressing the mouse scroll button to navigate the workspace.
- Preview as designer to verify configuration from designer's viewUse the 'preview as designer' option while configuring design parameters for a team so you can see how the configuration appears to a designer.
- Rename a view in Free viewDouble-click a view to rename it.
- Rotate the 3D view using bottom-right controlsOrbit the model with the rotation controls to view it from any side without changing the design itself.
- Rotate the 3D view with the middle mouse buttonRotate the 3D view using the middle mouse button, or use the viewing wheel at the bottom right of the working space for the same job.
- Set views in the view settings barSet views in the view settings bar and give each view its own settings configured there.
- Show concealed edges in a cross section elevationChoose the elevation type that always draws concealed edges so a cabinet cut shows parts like back panels.
- Switch an elevation from non-rich to rich viewBy default the elevation opens in non-rich (black-and-white) view, and you can switch rich view on.
- Switch between 2D floor plan and 3D viewsSwitch between the 2D floor plan and 3D views and see how the status bar and property panel react.
- Switch levels and understand what each level hidesMove between World, Building, Floor and Room from the level selector and know what each level hides.
- Toggle floor plan, 3D and elevation from the navigation barUse the navigation bar at the top of the design workspace to switch between floor plan, 3D and elevation and to move between levels.
- Turn on X-ray mode with XR shortcut or construction menuSwitch furniture into X-ray mode using the XR shortcut, the Construction menu or the left-side menu.
- Turn on the Automatic Shutter Design PickerEnable the preference under Other Preferences so applying a shutter design picks the closest-size design from the same catalog group.
- Understand elevation camera naming and settingsLearn how a new elevation camera is named by its kind and which controls its left panel and View toolbar offer.
- Understand global layers in the designLearn what the global layers panel lists and what a layer controls.
- Understand how layers come by default in InfurniaLearn that every item in Infurnia has a layer and that layers come by default.
- Understand why view-level edits stay in one viewLearn that changes made after unlocking a view apply only to that view, and that each named view keeps its own layer visibility.
- Unlock a view to change layer visibility or object propertiesUnlock a saved view so you can change layer visibility or object properties, then lock it again.
- Use plane elevation for side, back or section-style viewsPlace a plane elevation symbol on the floor plan to create side, back or section-style views.
- View connectors in 3D using X-ray mode shortcut XR enterToggle X-ray mode on a selected cabinet to inspect its connectors in the 3D view, then return to normal selection.
- Drawer bottom elevation is 12 and construction setting is 20Connectors are already present in the construction.
- Generate multi-cabinet elevations and change finishes in bulkOpen a cabinet's 2D Drawings to generate elevations covering several cabinets, then group-select cabinets to change their materials and finishes in one action.
- Manually change wardrobe construction and turn off back skirtingCustomize a wardrobe by manually changing its construction and turning off the back skirting for a sliding wardrobe.
- Set wall height and slab thickness from ceiling elevationEstablish the correct wall height for a kitchen layout by reading the ceiling's elevation and setting the slab thickness from the same panel.
- Move cabinets in 2D and 3D viewsMove a cabinet up and down and reposition it in either the 2D view or the 3D view.
- Dimension units in an elevation with Align DimensionPick a unit's carcass, partitions and shutters by their edges and chain dimensions along the same direction in an elevation.
- Generate separate floor plans per cabinet type using view-specific layersGive each cabinet type its own plan so base, wall and loft units print separately.
- Place a door and set its width, thickness, height and elevationPlace a door on a wall and edit its width, thickness and height on the left panel.
- Position a drawer box with bottom elevation and bottom panel offsetRaise the drawer box above the shutter bottom with bottom elevation and fine-tune the bottom panel with its offset, remembering that the offset reduces the drawer box height.
- Show material colours on elevations with Rich ViewSwitch an elevation to Rich View so the cabinets display the actual materials applied to them.
- Use auto dimension on the correct drawing layerSet the units to the matching plan layer first, then add auto dimension to populate every cabinet dimension at once.
- Add ceiling from floor plan and match elevation to wall heightAdd a ceiling by selecting the ceiling option in the floor plan view and applying it within the room.
- Bulk-edit hinge positions across multiple shutters via scenario viewUse the scenario view flow to bulk-edit hinge positions across multiple shutters, and apply the same flow to replace one hinge type with another.
- Check manually added hardware in the BOQ, CAM and 3D viewManually added hardware appears in the BOQ but may not affect the CAM output or the 3D view.
- Create an electrical drawing view with legible electrical pointsCreate a new elevation and a view from it, then hide furniture or lighten its layer colour so electrical point annotations and measurements stay legible.
- Create and open a wall section elevation from a wall face in 3DClick a wall's face in 3D to select that wall section, then add an elevation of that face and open it from the Wall Section Elevation list.
- Create custom or sectional elevations starting from a cabinetStart an elevation from a specific cabinet to create a custom or sectional elevation.
- Delete and reorder dimension lines on an elevationRemove a dimension line you no longer need, then drag auto dimension lines into the row order you want.
- Fix a floor slab that disappears when you hide the ceiling slabLearn why hiding the ceiling slab also hides the floor slab, since ceiling and floor slabs are both RCC slabs.
- Open a shutter in the 3D viewRight-click a shutter in the 3D view to open it.
- Set fall ceiling elevation to wall height minus ceiling thicknessDefine the fall ceiling shape and thickness, then set its elevation to the wall height minus the ceiling thickness so the ceiling sits correctly below the wall top.
- Set the default wall elevation view distance for your organisationSet the distance used when opening a wall elevation view once as an organisation-wide default instead of changing it per view.
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- Add and resize windows with sill height elevationAdd and modify windows like doors, setting a sill height elevation and changing window dimensions directly on the drawing by clicking the displayed measurement.
- Add architectural columns and beams from ground floor plan viewAdd architectural columns and beams by working in the ground floor plan view and choosing them from the architecture options.
- Add arrows, guidelines and text on a view using draw-over and annotateAdd arrows and text annotations to a view, then lock it so the annotations stay in place.
- Change finishes in QC mode and see them in the 3D viewReplace a finish while in QC mode and the 3D view stays in sync with your change.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Draw and configure hatching in the drawing viewAdd hatching to your drawing by drawing a boundary and applying it, then adjust its configuration and scale.
- Draw electrical and plumbing layouts on the reflected ceiling planSet up line properties and multi-select elements so electrical and plumbing layouts, including 3D props such as fans, appear correctly on the reflected ceiling plan.
- Enable tiling layout plan or reflected ceiling plan from bottom rightTurn on the tiling layout plan or reflected ceiling plan option so you can place and arrange ceiling elements such as lights.
- Fix a design that opens in view mode and cannot be editedA design you can only view opens in view mode, where panels and components cannot be selected or edited, so you need edit access to inspect or change it.
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- Move between buildings, floors, rooms and viewsUse the navigation toolbar to shift location within a project instead of editing geometry.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Rename a design from the design viewChange the design name shown next to the design label in the design view.
- Rename a room and show or hide its area labelSet the area option to show or hide a room's area in the model space and choose the area format you prefer.
- Set a window's sill level with the elevation fieldEnter the sill level measured at site into the elevation field so the window sits at the right height.
- Set door elevation and shift a door in its propertiesLearn where elevation sits in the door properties panel, why a door's elevation is zero, and how to shift the door along either direction.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Shelf annotations show in skeleton view by defaultShelf annotations mark adjustable, fixed and glass shelves in the skeleton view by default, and you can turn them off from the LHS property panel.
- Show a staircase in elevation viewRepresent a staircase in an elevation by drawing it manually with the draw tool.
- Show cabinet internals with Skeleton mode in an elevation viewTurn on Skeleton mode in an elevation view to hide the shutters and reveal the cabinet's internal partitions and carcass so you can dimension them directly.
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- Zoom to fit the design view with Shift+ZPress Shift+Z in the design view to fit the view to the objects in your design.
More guides 5
Show all (5)
- Edit in 2D and see changes in 3DMake changes in the 2D floor plan and watch them appear immediately in the 3D view, placing beams and columns in 2D first.
- Find modelling tools and properties in the Home tabUse the Home tab to reach frequently used modelling tools and the properties bar to view and edit whatever you click in the 3D scene.
- Find tools on the Home toolbar and the other tabsLearn which frequently used tools sit on the Home button and where the remaining tools live across the Architecture, Draw, Insert, Annotate, View, Render and Outputs tabs.
- Move a selected object with keys and gimbal arrowsLearn the keyboard and gimbal-arrow shortcuts that move a selected object by exact distances in the floor plan and 3D view.
- Use X-ray mode via toggle when XR shortcut failsTurn on X-ray mode with X or the toggle when XR and Enter does nothing, then click a hinge or component to select it.