视图、立面图和可见性
指南:116
- 了解立面自动标注涵盖哪些内容查看自动标注会测量哪些柜体及周边元素,以及哪些不测量。
- Understand what elevation views include and how to fix missing elementsLearn how elevation views auto-close cabinet shutters and doors, which elements they include, and how to bring back anything missing.
- 为橱柜和岛台厨房选择正确的立面选择与您的厨房布局相匹配的立面方法,然后在图纸上添加尺寸。
- 从 3D 墙体创建立面,并在丰富视图或骨架视图之间切换在 3D 视图中从墙体生成立面,然后在丰富视图、骨架视图和其他显示模式之间切换。
- 自动标注:各视图中的行为与可见渲染图层错误了解自动标注在立面视图和平面图中的行为、如何添加和移除自动标注,以及如何修复可见渲染图层错误。
- 点击墙面生成立面图点击墙面即可自动生成其立面图,可选择黑白或彩色。
- 生成带尺寸标注的室内立面和室外立面生成带尺寸标注的室内立面和室外立面,工作时可使用骨架模式和复制立面。
- 使用添加按钮生成立面图使用添加按钮生成立面图,系统会自动创建该视图。
- 打开立面视图如何切换您的当前楼层了解从视图栏打开立面视图时,您的当前楼层、版本历史和视图位置会发生什么变化。
- 锁定自定义视图并将其添加到演示文稿锁定自定义视图,即可直接将其添加到演示文稿;请注意,锁定仅对该特定视图生效。
- 离开立面图后返回立面图切换到 3D 或平面图后,可从 3D 中的墙体或 3D 旁的列表返回你离开的立面图。
- 在锁定的立面视图上运行自动标注尺寸为锁定的立面视图添加自动尺寸标注,并手动补全自动标注遗漏的部分。
- 在2D中查看平面图,在3D房间层级查看室内切换到2D模式可查看平面图,使用3D中的房间层级可在隐藏遮挡墙体并显示天花板的情况下查看室内。
- 计算柜体的完成面标高将柜体高度、踢脚高度和台面厚度相加,得到用于对齐元素的总标高。
- Export 3D 几何图形导出为 glTF,立面图导出为 DWG将墙体、门和窗导出为 glTF 3D 模型,DWG 仅用于立面图。
- 将立面图导出为 DWG/DXF,将 3D 导出为 GLTF按选定的 Acad 版本将立面图导出为 DWG、DXF 或 DXB,并将 3D 视图导出为带 KHR 扩展的 GLTF。
- 在导航工具栏中查找绘图工具并切换 2D/3D 视图使用设计界面顶部的导航工具栏,可访问所有绘图和放置选项,并在 2D 平面图和 3D 视图之间切换。
- 修复立面视图中缺失的对象设置立面偏好中的距离值,使靠近墙面的对象显示在墙面立面图中。
- 通过家具/灯光标签可见性隐藏立面中的标签关闭所选单元的标签可见性,以从立面视图中移除其注释标签。
- 通过面板级可见性隐藏或删除柜体板件在柜体的Construction > Carcass > Carcass Panels Visibility中关闭单个柜体板件。
- 隐藏未编辑的左侧和右侧填充件,而不是删除它们对于未在设计稿中直接编辑过的左侧和右侧填充件,请将其隐藏,而不是删除。
- Exploded View 输出 PDF 的生成方式了解 Exploded View 输出会生成哪些内容,以及每个单元的示意图、标注和部件表如何排布。
- 完成尺寸标注和注释后锁定视图添加尺寸标注和注释后,请从设置中再次锁定视图,使已完成的尺寸标注和详图保持不变。
- 开启自动捕捉,将墙体限制为 90 度开启 Orthogonal Snapping,使绘制的墙体和线条保持 90 度,然后用 Trim/Extend to Corner 连接墙体。
- Assign annotations and leaders to the relevant layer for easy switchingLearn which layers text boxes and leader lines use by default and how to hide objects with the system hidden layer.
- 通过更改绘图图层将所选元素分配到图层使用更改绘图图层选项将所选项目移入图层,然后在单个柜体的自定义面板中确认其图层。
- Control layers per view separately from global layersSet each 3D, floor plan, elevation or section view to show only the layers you want, while global layers still control the overall model.
- Control what information is shown with drawing layersUse drawing layers to control what information is shown on a drawing.
- Create a locked section view and add annotationsGenerate a section with the elevation tool, lock it as a view, and add text from the annotate option.
- 创建自定义图层并将项目分配到这些图层在自定义部分创建您自己的图层,并将项目移到这些图层上,以便一起显示、隐藏和着色。
- 在平面图和立面图中绘制参考项并标注标签使用绘制工具绘制参考项,使用标注工具为其添加标签,并按需设置图层以完成图纸。
- Enable Rotate by switching to 3D viewEnter 3D mode from the navbar so the greyed-out Rotate tool becomes available.
- 从自动标注尺寸中排除元素类型和图层通过设计的立面偏好设置和图纸图层,控制哪些元素会被标注尺寸。
- Format elevation name text labelsWith the text selected, use the left panel to set bold, underline, alignment, colour and size.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- 使用图层面板中的图层隐藏或取消隐藏项目通过切换项目所在图层的可见性,可一次隐藏或显示整组项目。
- 元素如何自动分配到全局图层您添加的每个元素都会自动放置在其各自的全局图层上,您可以在自定义图层上重新分组项目。
- 在3D视图中隔离一个单元,并将QC范围限定到一个房间在不受墙壁遮挡的情况下近距离检查一个单元,然后通过为其设置独立的工作范围,仅对一个房间运行QC。
- Know which View options are enabled in each viewCheck which View menu options are available in the 2D floor plan, in an elevation view and outside an elevation.
- Lock a 3D view with plus view to return to your working angleLock your working camera angle, then zoom and navigate freely and return to it instead of resetting the camera by hand.
- 设置尺寸后锁定立面视图以保留这些尺寸添加尺寸并命名后锁定立面视图,使其设置在切换到平面图或 3D 后仍能保留。
- 锁定视图以保留相机位置锁定视图,以便在导航时保留相机位置。
- Manage global layers from global preferencesOpen the fourth global preferences button to manage system and custom layers, set them global or view-specific, and control rich view with finishes per layer.
- Navigate the 3D view with a long-press of the mouse scroll buttonMove around the 3D view by long-pressing the mouse scroll button to navigate the workspace.
- 以设计师身份预览,从设计师视角验证配置为团队配置设计参数时,使用 'preview as designer' 选项,即可查看配置在设计师眼中的显示效果。
- Rename a view in Free viewDouble-click a view to rename it.
- Rotate the 3D view using bottom-right controlsOrbit the model with the rotation controls to view it from any side without changing the design itself.
- 使用鼠标中键旋转 3D 视图使用鼠标中键旋转 3D 视图,或使用工作区右下角的查看轮完成同样的操作。
- 在视图设置栏中设置视图在视图设置栏中设置视图,并为每个视图配置其各自的设置。
- 在横截面立面图中显示隐藏边选择始终绘制隐藏边的立面图类型,以便柜体剖切时显示背板等部件。
- Switch an elevation from non-rich to rich viewBy default the elevation opens in non-rich (black-and-white) view, and you can switch rich view on.
- 在 2D 平面图和 3D 视图之间切换在 2D 平面图和 3D 视图之间切换,观察状态栏和属性面板如何响应。
- 切换层级并了解每个层级会隐藏什么通过层级选择器在World、Building、Floor和Room之间切换,并了解每个层级会隐藏什么。
- 从导航栏切换平面图、3D 和立面图使用设计工作区顶部的导航栏在平面图、3D 和立面图之间切换,并在各楼层之间移动。
- 使用 XR 快捷键或构造菜单开启 X 光模式使用 XR 快捷键、Construction 菜单或左侧菜单将家具切换到 X 光模式。
- 开启 Automatic Shutter Design Picker在 Other Preferences 下启用该偏好设置,这样应用门板设计时,会从同一目录组中选取尺寸最接近的设计。
- 了解立面相机命名和设置了解新立面相机如何按其类型命名,以及其左侧面板和 View 工具栏提供哪些控件。
- Understand global layers in the designLearn what the global layers panel lists and what a layer controls.
- Understand how layers come by default in InfurniaLearn that every item in Infurnia has a layer and that layers come by default.
- Understand why view-level edits stay in one viewLearn that changes made after unlocking a view apply only to that view, and that each named view keeps its own layer visibility.
- 解锁视图以更改图层可见性或对象属性解锁已保存的视图,以便更改图层可见性或对象属性,然后再次锁定该视图。
- Use plane elevation for side, back or section-style viewsPlace a plane elevation symbol on the floor plan to create side, back or section-style views.
- View connectors in 3D using X-ray mode shortcut XR enterToggle X-ray mode on a selected cabinet to inspect its connectors in the 3D view, then return to normal selection.
- 抽屉底板高度为 12,结构设置为 20结构中已包含连接件。
- 批量生成多柜立面图并更改饰面打开柜体的2D Drawings,生成覆盖多个柜体的立面图,然后框选柜体,一次性更改它们的材料和饰面。
- 手动更改衣柜结构并关闭背板踢脚通过手动更改结构并关闭推拉衣柜的背板踢脚,自定义衣柜。
- 根据天花板标高设置墙高和楼板厚度通过读取天花板标高并在同一面板中设置楼板厚度,为厨房布局确定正确的墙高。
- 在2D和3D视图中移动柜体在2D视图或3D视图中上下移动柜体并重新定位。
- 立面图中的尺寸单位(使用Align Dimension)在立面图中,按柜体、隔板和门板的边缘选取它们,并沿同一方向串联尺寸。
- 使用视图专属图层,按柜体类型生成单独的平面图为每种柜体类型提供各自的平面图,使地柜、吊柜和顶柜分别打印。
- 放置门并设置其宽度、厚度、高度和标高在墙上放置门,并在左侧面板中编辑其宽度、厚度和高度。
- 通过底部抬高和底板偏移来定位抽屉盒使用底部抬高将抽屉盒抬离门板底部,并通过偏移量微调底板,请注意偏移量会减小抽屉盒高度。
- 使用Rich View在立面图上显示材料颜色将立面图切换为Rich View,使柜体显示其实际应用的材料。
- 在正确的绘图图层上使用自动尺寸标注先将单位设置为与平面图图层匹配的图层,然后添加自动尺寸标注,一次性填充所有柜体尺寸。
- 从平面图添加天花板,并使标高与墙高匹配在平面图视图中选择天花板选项,并在房间内应用,即可添加天花板。
- 通过场景视图批量编辑多个柜门的铰链位置使用场景视图流程批量编辑多个柜门的铰链位置,并用同一流程将一种铰链类型替换为另一种。
- 在BOQ、CAM和3D视图中检查手动添加的五金件手动添加的五金件会显示在BOQ中,但可能不会影响CAM输出或3D视图。
- 创建电气点位清晰可读的电气图纸视图新建一个立面图,再从中创建一个视图,然后隐藏家具或将其图层颜色调浅,使电气点位标注和尺寸保持清晰可读。
- Create and open a wall section elevation from a wall face in 3DClick a wall's face in 3D to select that wall section, then add an elevation of that face and open it from the Wall Section Elevation list.
- 从单个柜体开始创建自定义立面图或剖切立面图从特定柜体开始绘制立面图,以创建自定义立面图或剖切立面图。
- 删除并重新排列立面图上的尺寸标注线删除不再需要的尺寸标注线,然后将自动尺寸标注线拖动到所需的行顺序。
- 修复隐藏天花板楼板时消失的地面板了解为什么隐藏天花板楼板也会隐藏地面板,因为天花板楼板和地面板都是钢筋混凝土楼板。
- 在3D视图中打开柜门在3D视图中右键单击柜门即可打开。
- 将跌级吊顶的标高设置为墙高减去吊顶厚度定义跌级吊顶的形状和厚度,然后将其标高设置为墙高减去吊顶厚度,使吊顶正确位于墙顶下方。
- 为您的组织设置默认的墙面立面视图距离将打开墙面立面视图时使用的距离一次性设置为组织范围的默认值,无需逐个视图更改。
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- 添加窗户并通过窗台高度标高调整尺寸像添加和修改门一样添加和修改窗户,设置窗台高度标高,并通过点击图纸上显示的测量值直接更改窗户尺寸。
- 从底层平面图视图添加建筑柱和梁在底层平面图视图中操作,并从建筑选项中选择柱和梁,即可添加建筑柱和梁。
- Add arrows, guidelines and text on a view using draw-over and annotateAdd arrows and text annotations to a view, then lock it so the annotations stay in place.
- Change finishes in QC mode and see them in the 3D viewReplace a finish while in QC mode and the 3D view stays in sync with your change.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Draw and configure hatching in the drawing viewAdd hatching to your drawing by drawing a boundary and applying it, then adjust its configuration and scale.
- Draw electrical and plumbing layouts on the reflected ceiling planSet up line properties and multi-select elements so electrical and plumbing layouts, including 3D props such as fans, appear correctly on the reflected ceiling plan.
- 从右下角启用天花布置图或天花反射图开启天花布置图或天花反射图选项,以便放置和布置灯具等天花元素。
- Fix a design that opens in view mode and cannot be editedA design you can only view opens in view mode, where panels and components cannot be selected or edited, so you need edit access to inspect or change it.
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- 在建筑、楼层、房间和视图之间移动使用导航工具栏在项目中切换位置,而不是编辑几何图形。
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- Reassign modular units to renumber cabinet elevationsRenumber cabinet elevations by reassigning modular units in output settings, shifting the sequence so labels run in order.
- Rename a design from the design viewChange the design name shown next to the design label in the design view.
- Rename a room and show or hide its area labelSet the area option to show or hide a room's area in the model space and choose the area format you prefer.
- 使用 elevation 字段设置窗台高度将现场测量的窗台高度输入 elevation 字段,使窗户处于正确高度。
- 设置门的高度位置,并在门的属性中移动门了解高度位置在门属性面板中的位置、门的标高为什么为零,以及如何沿任一方向移动门。
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- 搁板标注默认在骨架视图中显示搁板标注默认在骨架视图中标记可调搁板、固定搁板和玻璃搁板,您可以在左侧属性面板中关闭它们。
- 在立面视图中显示楼梯使用绘图工具手动绘制,在立面图中表示楼梯。
- 在立面视图中用骨架模式显示柜体内部在立面视图中使用Turn on Skeleton mode隐藏门板,显示柜体的内部隔板和柜身,以便直接为其标注尺寸。
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- 使用 Shift+Z Zoom to fit设计视图在设计视图中按 Shift+Z,使视图适应设计中的对象。
更多指南 5
显示全部(5)
- Edit in 2D and see changes in 3DMake changes in the 2D floor plan and watch them appear immediately in the 3D view, placing beams and columns in 2D first.
- Find modelling tools and properties in the Home tabUse the Home tab to reach frequently used modelling tools and the properties bar to view and edit whatever you click in the 3D scene.
- Find tools on the Home toolbar and the other tabsLearn which frequently used tools sit on the Home button and where the remaining tools live across the Architecture, Draw, Insert, Annotate, View, Render and Outputs tabs.
- Move a selected object with keys and gimbal arrowsLearn the keyboard and gimbal-arrow shortcuts that move a selected object by exact distances in the floor plan and 3D view.
- Use X-ray mode via toggle when XR shortcut failsTurn on X-ray mode with X or the toggle when XR and Enter does nothing, then click a hinge or component to select it.