Move, copy, mirror and array
Guides: 28
- Extend a panel to a target depth or to the backEnter the right extension amount to reach a target overall depth or run a panel to the back of the cabinet.
- Copy and paste a cabinet to create similar cabinets quicklyFully adjust one cabinet first, then copy and paste it to create multiple similar cabinets faster than adjusting each one individually.
- Extend a panel down to the floor instead of skirtingMake a panel continue to the floor instead of showing skirting by using the extension parameters in its construction settings.
- Extend a panel using the construction tabGrow a panel on its left, right, front or back side by entering an extension value in the construction tab.
- Extend or reduce a panel edge with extension parametersUse the four directional extension fields to lengthen or shorten a panel edge, including negative values.
- Extend the back panel at Construction levelNavigate to the Construction level to extend the back panel.
- Create patterned trim using sweep with a path and profileDraw the trim outline as a path, then sweep a profile shape along it to create patterned trim or moulding.
- Create trim and groove designs on a shutter with Extrude and CutPull a drawn region forward with Extrude or recess it by a cut depth to build trim and groove-style designs on a shutter.
- Extend a cabinet end panel to the floor or ceilingExtend an end panel added from a cabinet's End Panel section downward to the floor or upward from its own panel using the Width Extension values.
- Extend a panel side using the R handleExtend a panel by a specified amount, such as 100 mm, using the R handle.
- Extend the bottom panel to cover a gap where the skirting breaksSelect the panel and extend it to cover the gap where a separate skirting would otherwise break.
- Use move tool (MV) for precise distance instead of draggingMove an object an exact distance by using the move tool instead of dragging.
- Copy and paste elements between flats with Ctrl+C and Ctrl+VReuse an element such as a chimney duct in a second flat without re-importing and re-aligning it.
- Trim a side panel to match an angled top using Edit panel designAdjust a side panel so it matches the angle of a custom angled top panel using Edit panel design or Edit shape.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Copy and paste elements with Ctrl+C and Ctrl+VCopy and paste elements with the Ctrl+C and Ctrl+V shortcuts, then place doors and windows on a wall.
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Place and move loft units via Furnish and the move toolPlace loft units from Kitchen Furniture, move them with the arrow options or the move tool, and add or resize box lofts as needed.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
More guides 5
Show all (5)
- Change construction options that affect production and pricingAdjust how carcass panels extend, connect and rail so the construction tab changes carry through to production outputs and pricing.
- Copy makes one copy; multiply makes repeated copiesLearn how the copy tool's copy and multiply options differ so you can duplicate a shape once or repeat it at a regular interval.
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.