ସ୍ଥାନାନ୍ତର, କପି, ମିରର୍ ଏବଂ ଆରେ
ଗାଇଡ୍: 28
- ଏକ ପ୍ୟାନେଲକୁ ଲକ୍ଷ୍ୟ ଗଭୀରତା କିମ୍ବା ପଛ ପର୍ଯ୍ୟନ୍ତ ବଢ଼ାନ୍ତୁଲକ୍ଷ୍ୟ ସାମଗ୍ରିକ ଗଭୀରତା ପାଇଁ ସଠିକ୍ ବିସ୍ତାର ପରିମାଣ ଦିଅନ୍ତୁ କିମ୍ବା ପ୍ୟାନେଲକୁ କ୍ୟାବିନେଟର ପଛ ପର୍ଯ୍ୟନ୍ତ ନେଇଯାଆନ୍ତୁ।
- ଶୀଘ୍ର ସମାନ କ୍ୟାବିନେଟ୍ ତିଆରି କରିବା ପାଇଁ ଏକ କ୍ୟାବିନେଟ୍ କପି କରି ପେଷ୍ଟ କରନ୍ତୁପ୍ରଥମେ ଏକ କ୍ୟାବିନେଟ୍ ସମ୍ପୂର୍ଣ୍ଣ ଭାବେ ସଜାଡ଼ନ୍ତୁ, ତାପରେ ପ୍ରତ୍ୟେକଟିକୁ ଅଲଗା ଅଲଗା ସଜାଡ଼ିବା ଅପେକ୍ଷା ଶୀଘ୍ର ଏକାଧିକ ସମାନ କ୍ୟାବିନେଟ୍ ତିଆରି କରିବା ପାଇଁ ଏହାକୁ କପି କରି ପେଷ୍ଟ କରନ୍ତୁ।
- ସ୍କର୍ଟିଂ ଦେଖାଇବା ପରିବର୍ତ୍ତେ ଏକ ପ୍ୟାନେଲକୁ ତଳ ପର୍ଯ୍ୟନ୍ତ ବଢ଼ାନ୍ତୁଏହାର construction ସେଟିଂସରେ extension ପାରାମିଟର ବ୍ୟବହାର କରି ଏକ ପ୍ୟାନେଲ ସ୍କର୍ଟିଂ ଦେଖାଇବା ପରିବର୍ତ୍ତେ ତଳ ପର୍ଯ୍ୟନ୍ତ ଚାଲୁ ରଖନ୍ତୁ।
- ନିର୍ମାଣ ଟ୍ୟାବ୍ ବ୍ୟବହାର କରି ଏକ ପ୍ୟାନେଲ୍ ବିସ୍ତାର କରନ୍ତୁନିର୍ମାଣ ଟ୍ୟାବ୍ରେ ଏକ ବିସ୍ତାର ମୂଲ୍ୟ ଦାଖଲ କରି ଏକ ପ୍ୟାନେଲ୍କୁ ଏହାର ବାମ, ଡାହାଣ, ସାମନା କିମ୍ବା ପଛ ପାଖକୁ ବଢ଼ାନ୍ତୁ।
- ଏକ୍ସଟେନସନ ପାରାମିଟର ସହିତ ପ୍ୟାନେଲ ଧାରକୁ ବଢ଼ାନ୍ତୁ କିମ୍ବା କମାନ୍ତୁପ୍ୟାନେଲ ଧାରକୁ ଲମ୍ବା କିମ୍ବା ଛୋଟ କରିବା ପାଇଁ ଚାରୋଟି ଦିଗୀୟ ଏକ୍ସଟେନସନ ଫିଲ୍ଡ ବ୍ୟବହାର କରନ୍ତୁ, ଋଣାତ୍ମକ ମୂଲ୍ୟ ସହିତ।
- Construction ସ୍ତରରେ ପଛ ପ୍ୟାନେଲ ବଢ଼ାନ୍ତୁପଛ ପ୍ୟାନେଲ ବଢ଼ାଇବା ପାଇଁ Construction ସ୍ତରକୁ ଯାଆନ୍ତୁ।
- ପଥ ଏବଂ ପ୍ରୋଫାଇଲ ସହିତ ସ୍ୱିପ ବ୍ୟବହାର କରି ପ୍ୟାଟର୍ନଯୁକ୍ତ ଟ୍ରିମ ତିଆରି କରନ୍ତୁଟ୍ରିମର ଆଉଟଲାଇନକୁ ଏକ ପଥ ଭାବରେ ଆଙ୍କନ୍ତୁ, ତାପରେ ପ୍ୟାଟର୍ନଯୁକ୍ତ ଟ୍ରିମ କିମ୍ବା ମୋଲ୍ଡିଂ ତିଆରି କରିବା ପାଇଁ ସେହି ପଥ ସହିତ ଏକ ପ୍ରୋଫାଇଲ ଆକୃତିକୁ ସ୍ୱିପ କରନ୍ତୁ।
- Extrude ଏବଂ Cut ସହିତ ଏକ ଶଟର ଉପରେ ଟ୍ରିମ ଏବଂ ଗ୍ରୁଭ ଡିଜାଇନ ତିଆରି କରନ୍ତୁଏକ ଶଟର ଉପରେ ଟ୍ରିମ ଏବଂ ଗ୍ରୁଭ-ଶୈଳୀର ଡିଜାଇନ ତିଆରି କରିବା ପାଇଁ ଏକ ଅଙ୍କିତ ଅଞ୍ଚଳକୁ Extrude ସହିତ ଆଗକୁ ଟାଣନ୍ତୁ କିମ୍ବା ଏକ କଟ ଗଭୀରତା ଦ୍ୱାରା ତାହାକୁ ଭିତରକୁ ଦବାନ୍ତୁ।
- ଏକ କ୍ୟାବିନେଟ୍ର ଏଣ୍ଡ ପ୍ୟାନେଲ୍କୁ ତଳ ପର୍ଯ୍ୟନ୍ତ କିମ୍ବା ଛାତ ପର୍ଯ୍ୟନ୍ତ ବିସ୍ତାର କରନ୍ତୁକ୍ୟାବିନେଟ୍ର End Panel ବିଭାଗରୁ ଯୋଡ଼ାଯାଇଥିବା ଏକ ଏଣ୍ଡ ପ୍ୟାନେଲ୍କୁ Width Extension ମୂଲ୍ୟ ବ୍ୟବହାର କରି ତଳ ପର୍ଯ୍ୟନ୍ତ ତଳକୁ କିମ୍ବା ଏହାର ନିଜ ପ୍ୟାନେଲ୍ରୁ ଉପରକୁ ବିସ୍ତାର କରନ୍ତୁ।
- R handle ବ୍ୟବହାର କରି ଏକ ପ୍ୟାନେଲ ପାର୍ଶ୍ୱକୁ ବିସ୍ତାର କରନ୍ତୁR handle ବ୍ୟବହାର କରି ଏକ ପ୍ୟାନେଲକୁ 100 mm ପରି ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ ପରିମାଣରେ ବିସ୍ତାର କରନ୍ତୁ।
- ସ୍କର୍ଟିଂ ଯେଉଁଠାରେ ଭାଙ୍ଗେ ସେହି ଫାଙ୍କ ଢାଙ୍କିବା ପାଇଁ ତଳ ପ୍ୟାନେଲକୁ ବଢ଼ାନ୍ତୁପ୍ୟାନେଲ ଚୟନ କରନ୍ତୁ ଏବଂ ଯେଉଁ ଫାଙ୍କରେ ଅଲଗା ସ୍କର୍ଟିଂ ଅନ୍ୟଥା ଭାଙ୍ଗିଯାଆନ୍ତା, ସେହି ଫାଙ୍କ ଢାଙ୍କିବା ପାଇଁ ଏହାକୁ ବଢ଼ାନ୍ତୁ।
- ସଠିକ୍ ଦୂରତା ପାଇଁ ଟାଣିବା ପରିବର୍ତ୍ତେ move tool (MV) ବ୍ୟବହାର କରନ୍ତୁଟାଣିବା ପରିବର୍ତ୍ତେ move tool ବ୍ୟବହାର କରି ଏକ ବସ୍ତୁକୁ ସଠିକ୍ ଦୂରତାକୁ ଘୁଞ୍ଚାନ୍ତୁ।
- Copy and paste elements between flats with Ctrl+C and Ctrl+VReuse an element such as a chimney duct in a second flat without re-importing and re-aligning it.
- Trim a side panel to match an angled top using Edit panel designAdjust a side panel so it matches the angle of a custom angled top panel using Edit panel design or Edit shape.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Ctrl+C ଏବଂ Ctrl+V ସହିତ ଉପାଦାନଗୁଡ଼ିକୁ କପି ଏବଂ ପେଷ୍ଟ କରନ୍ତୁCtrl+C ଏବଂ Ctrl+V ସର୍ଟକଟ ସହିତ ଉପାଦାନଗୁଡ଼ିକୁ କପି ଏବଂ ପେଷ୍ଟ କରନ୍ତୁ, ତାପରେ କାନ୍ଥ ଉପରେ ଦ୍ୱାର ଏବଂ ଝରକା ରଖନ୍ତୁ।
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- ଫର୍ନିସ୍ ଏବଂ ମୁଭ୍ ଟୁଲ୍ ମାଧ୍ୟମରେ ଲଫ୍ଟ ୟୁନିଟ୍ ରଖନ୍ତୁ ଏବଂ ସ୍ଥାନାନ୍ତର କରନ୍ତୁକିଚେନ୍ ଫର୍ନିଚର୍ରୁ ଲଫ୍ଟ ୟୁନିଟ୍ ରଖନ୍ତୁ, ତୀର ବିକଳ୍ପ କିମ୍ବା ମୁଭ୍ ଟୁଲ୍ ସହିତ ସେଗୁଡ଼ିକୁ ସ୍ଥାନାନ୍ତର କରନ୍ତୁ, ଏବଂ ଆବଶ୍ୟକ ଅନୁସାରେ ବକ୍ସ ଲଫ୍ଟ ଯୋଡ଼ନ୍ତୁ କିମ୍ବା ଆକାର ବଦଳାନ୍ତୁ।
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
ଅଧିକ ଗାଇଡ୍ 5
ସବୁ ଦେଖାନ୍ତୁ (5)
- ଉତ୍ପାଦନ ଓ ମୂଲ୍ୟ ନିର୍ଧାରଣକୁ ପ୍ରଭାବିତ କରୁଥିବା ନିର୍ମାଣ ବିକଳ୍ପଗୁଡ଼ିକ ବଦଳାନ୍ତୁକାର୍କାସ୍ ପ୍ୟାନେଲଗୁଡ଼ିକ କିପରି ବିସ୍ତାର ହେବ, ସଂଯୁକ୍ତ ହେବ ଓ ରେଲ୍ ହେବ ତାହା ସମାୟୋଜିତ କରନ୍ତୁ, ଯାହାଫଳରେ construction ଟ୍ୟାବ୍ର ପରିବର୍ତ୍ତନଗୁଡ଼ିକ ଉତ୍ପାଦନ ଆଉଟପୁଟ୍ ଓ ମୂଲ୍ୟ ନିର୍ଧାରଣକୁ ପ୍ରଭାବିତ କରିବ।
- Copy ଏକ କପି ତିଆରି କରେ; multiply ପୁନରାବୃତ୍ତ କପି ତିଆରି କରେcopy ଟୁଲ୍ର copy ଏବଂ multiply ବିକଳ୍ପ ମଧ୍ୟରେ ପାର୍ଥକ୍ୟ ଜାଣନ୍ତୁ, ଯାହାଦ୍ୱାରା ଆପଣ ଏକ ଆକୃତିକୁ ଥରେ ନକଲ କରିପାରିବେ କିମ୍ବା ନିୟମିତ ବ୍ୟବଧାନରେ ପୁନରାବୃତ୍ତି କରିପାରିବେ।
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.