हलवा, कॉपी करा, मिरर करा आणि अॅरे
मार्गदर्शक: 28
- पॅनलला लक्ष्य खोलीपर्यंत किंवा मागील बाजूपर्यंत वाढवालक्ष्य एकूण खोली गाठण्यासाठी किंवा पॅनल कॅबिनेटच्या मागील बाजूपर्यंत नेण्यासाठी योग्य वाढीचे प्रमाण प्रविष्ट करा.
- समान कॅबिनेट पटकन तयार करण्यासाठी एक कॅबिनेट कॉपी करून पेस्ट कराप्रथम एक कॅबिनेट पूर्णपणे समायोजित करा, नंतर ती कॉपी करून पेस्ट करा जेणेकरून प्रत्येक कॅबिनेट स्वतंत्रपणे समायोजित करण्यापेक्षा अनेक समान कॅबिनेट जलद तयार होतील.
- स्कर्टिंग दाखवण्याऐवजी पॅनल जमिनीपर्यंत वाढवापॅनलच्या construction सेटिंग्जमधील extension पॅरामीटर्स वापरून स्कर्टिंग दाखवण्याऐवजी पॅनल जमिनीपर्यंत चालू ठेवा.
- construction टॅब वापरून पॅनल वाढवाconstruction टॅबमध्ये extension मूल्य टाकून पॅनल त्याच्या डाव्या, उजव्या, पुढील किंवा मागील बाजूने वाढवा.
- विस्तार मापदंडांनी पॅनलची कड वाढवा किंवा कमी करापॅनलची कड लांब करण्यासाठी किंवा लहान करण्यासाठी चार दिशात्मक विस्तार फील्ड वापरा, ऋण मूल्यांसह.
- Construction स्तरावर मागील पॅनल वाढवामागील पॅनल वाढवण्यासाठी Construction स्तरावर जा.
- पथ आणि प्रोफाइल वापरून स्वीपने नमुनायुक्त ट्रिम तयार कराट्रिमची बाह्यरेषा पथ म्हणून काढा, नंतर नमुनायुक्त ट्रिम किंवा मोल्डिंग तयार करण्यासाठी त्या पथावर प्रोफाइल आकार स्वीप करा.
- Extrude आणि Cut वापरून शटरवर ट्रिम आणि ग्रूव्ह डिझाइन तयार कराशटरवर ट्रिम आणि ग्रूव्ह-शैलीची डिझाइन तयार करण्यासाठी काढलेला प्रदेश Extrude ने पुढे ओढा किंवा कट डेप्थने आत खोल करा.
- कॅबिनेटचा एंड पॅनल जमिनीपर्यंत किंवा छतापर्यंत वाढवाकॅबिनेटच्या End Panel विभागातून जोडलेला एंड पॅनल Width Extension मूल्यांनी खाली जमिनीपर्यंत किंवा त्याच्या स्वतःच्या पॅनलपासून वरच्या दिशेने वाढवा.
- R हँडल वापरून पॅनलची बाजू वाढवाR हँडल वापरून पॅनल ठराविक प्रमाणात, उदाहरणार्थ 100 mm, वाढवा.
- स्कर्टिंग तुटतो तेथील फट भरून काढण्यासाठी खालचा पॅनेल वाढवापॅनेल निवडा आणि स्वतंत्र स्कर्टिंगमुळे तुटणारी फट भरून काढण्यासाठी ते वाढवा.
- अचूक अंतरासाठी ड्रॅग करण्याऐवजी move tool (MV) वापराड्रॅग करण्याऐवजी move tool वापरून वस्तू अचूक अंतराने हलवा.
- Ctrl+C आणि Ctrl+V वापरून फ्लॅट्समध्ये एलिमेंट कॉपी आणि पेस्ट कराचिमणी डक्टसारखे एलिमेंट पुन्हा इम्पोर्ट न करता आणि पुन्हा अलाइन न करता दुसऱ्या फ्लॅटमध्ये पुन्हा वापरा.
- Trim a side panel to match an angled top using Edit panel designAdjust a side panel so it matches the angle of a custom angled top panel using Edit panel design or Edit shape.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Ctrl+C आणि Ctrl+V वापरून घटक कॉपी आणि पेस्ट कराCtrl+C आणि Ctrl+V शॉर्टकट वापरून घटक कॉपी आणि पेस्ट करा, नंतर भिंतीवर दरवाजे आणि खिडक्या ठेवा.
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Furnish आणि move tool द्वारे लॉफ्ट युनिट्स ठेवा आणि हलवाKitchen Furniture मधून लॉफ्ट युनिट्स ठेवा, बाण पर्याय किंवा move tool ने त्या हलवा, आणि आवश्यकतेनुसार बॉक्स लॉफ्ट्स जोडा किंवा त्यांचा आकार बदला.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
आणखी मार्गदर्शक 5
सर्व दाखवा (5)
- उत्पादन आणि किंमतीवर परिणाम करणारे बांधणी पर्याय बदलाकारकास पटल कसे पुढे जातात, जोडले जातात आणि रेल कशा बसतात हे समायोजित करा, जेणेकरून construction टॅबमधील बदल उत्पादन आउटपुट आणि किंमतीपर्यंत पोहोचतील.
- Copy एक प्रत बनवते; multiply वारंवार प्रती बनवतेआकार एकदा डुप्लिकेट करायचा की नियमित अंतराने पुन्हा करायचा, हे समजून घेण्यासाठी copy tool मधील copy आणि multiply पर्याय कसे वेगळे आहेत ते जाणून घ्या.
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.