移動、コピー、ミラー、配列
ガイド:28
- パネルを目標の奥行きまで、または背面まで延長する目標の全体奥行きに合わせる、またはパネルをキャビネットの背面まで延ばすには、適切な延長量を入力します。
- キャビネットをコピー&ペーストして、同様のキャビネットをすばやく作成しますまず1つのキャビネットを完全に調整してから、コピー&ペーストします。これにより、各キャビネットを個別に調整するより速く、複数の同様のキャビネットを作成できます。
- 巾木の代わりにパネルを床まで延長する構築設定の延長パラメータを使用すると、巾木を表示する代わりにパネルを床まで連続させることができます。
- constructionタブを使用してパネルを延長するconstructionタブに延長値を入力して、パネルを左、右、前、または後ろ側に広げます。
- 延長パラメータでパネルのエッジを延長または縮小する4つの方向の延長フィールドを使用して、パネルのエッジを延長または短縮できます。負の値も使用できます。
- Constructionレベルで背板を延長する背板を延長するには、Constructionレベルに移動します。
- パスとプロファイルを使用したスイープで模様付きの見切り材を作成する見切り材の輪郭をパスとして描き、そのパスに沿ってプロファイル形状をスイープして、模様付きの見切り材やモールディングを作成します。
- 押し出しとカットで扉にトリムと溝のデザインを作成する描いた領域を押し出しで手前に引き出すか、カット深さで窪ませて、扉にトリムや溝のスタイルのデザインを作成します。
- キャビネットの化粧側板を床または天井まで延長するキャビネットのEnd Panelセクションから追加した化粧側板を、Width Extensionの値を使って床まで下方向に、または化粧側板自身のパネルから上方向に延長します。
- Rハンドルを使用してパネルの側面を延長するRハンドルを使用して、100 mm など指定した量だけパネルを延長します。
- 下部パネルを延長して、幅木が途切れる隙間をふさぐパネルを選択し、別の幅木では途切れてしまう隙間をふさぐように延長します。
- ドラッグではなく移動ツール(MV)を使って正確な距離を指定するドラッグではなく移動ツールを使うと、オブジェクトを正確な距離だけ移動できます。
- Ctrl+CとCtrl+Vで住戸間の要素をコピー&ペーストするレンジフードダクトなどの要素を、再インポートや再位置合わせをせずに別の住戸で再利用できます。
- Edit panel designを使って側パネルを斜めの天板に合わせてトリムするEdit panel designまたはEdit shapeを使って、側パネルをカスタムの斜め天板パネルの角度に合うように調整します。
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Ctrl+CとCtrl+Vで要素をコピーして貼り付けるCtrl+CとCtrl+Vのショートカットで要素をコピーして貼り付け、壁にドアと窓を配置します。
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Furnishと移動ツールでロフト収納ユニットを配置して移動しますキッチン家具からロフト収納ユニットを配置し、矢印オプションまたは移動ツールで移動します。必要に応じてボックス型ロフト収納の追加やサイズ変更も行えます。
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
その他のガイド 5
すべて表示(5)
- 生産と価格に影響する構造オプションを変更するAdjust how carcass panels extend, connect and rail so the construction tab changes carry through to production outputs and pricing.
- コピーは1つの複製を作成し、乗算は繰り返し複製を作成しますコピーツールのコピーオプションと乗算オプションの違いを学び、図形を1回複製するか、一定の間隔で繰り返す方法を理解しましょう。
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.