স্থানান্তৰ, প্ৰতিলিপি, মিৰৰ আৰু এৰে
গাইড: 28
- পেনেলক লক্ষ্য গভীরতা বা পিছন পর্যন্ত বাড়ানলক্ষ্য সামগ্রিক গভীরতায় পৌঁছাতে বা পেনেলক কেবিনেটৰ পিছন পর্যন্ত নিতে সঠিক সম্প্ৰসাৰণ পৰিমাণ লিখক।
- একেটা কেবিনেট কপি আৰু পেষ্ট কৰি একেধৰণৰ কেবিনেট সোনকালে সৃষ্টি কৰকপ্ৰথমে এটা কেবিনেট সম্পূৰ্ণৰূপে সমন্বয় কৰক, তাৰ পিছত ইয়াক কপি আৰু পেষ্ট কৰি প্ৰতিটো পৃথককৈ সমন্বয় কৰাতকৈ সোনকালে একাধিক একেধৰণৰ কেবিনেট সৃষ্টি কৰক।
- স্কাৰ্টিঙৰ পৰিৱৰ্তে এটা পেনেল মজিয়ালৈকে তললৈ বঢ়াই দিয়কইয়াৰ construction settings-ত extension parameters ব্যৱহাৰ কৰি এটা পেনেলে স্কাৰ্টিং নেদেখুৱাই মজিয়ালৈকে আগবাঢ়ি যোৱাটো কৰক।
- নিৰ্মাণ টেব ব্যৱহাৰ কৰি এখন পেনেল বঢ়াওকনিৰ্মাণ টেবত এটা সম্প্ৰসাৰণ মান দি এখন পেনেলৰ বাওঁ, সোঁ, সন্মুখ বা পিছফালে বঢ়াওক।
- বিস্তাৰ প্ৰাচলৰ সৈতে এখন পেনেলৰ কাষ বঢ়াওক বা কমাওকচাৰিটা দিশগত বিস্তাৰ ক্ষেত্ৰ ব্যৱহাৰ কৰি এখন পেনেলৰ কাষ দীঘল বা চুটি কৰক, ঋণাত্মক মানকে ধৰি।
- Construction স্তৰত পিছফালৰ পেনেল বঢ়াওকপিছফালৰ পেনেল বঢ়াবলৈ Construction স্তৰলৈ যাওক।
- পথ আৰু প্ৰফাইল ব্যৱহাৰ কৰি sweep ৰে আৰ্হিযুক্ত ট্ৰিম সৃষ্টি কৰকট্ৰিমৰ আউটলাইনটো পথ হিচাপে আঁকক, তাৰ পিছত আৰ্হিযুক্ত ট্ৰিম বা মৌল্ডিং সৃষ্টি কৰিবলৈ সেই পথৰ লগত প্ৰফাইল আকৃতি sweep কৰক।
- Extrude আৰু Cut ৰে এখন শাটাৰত ট্ৰিম আৰু গ্ৰুভ ডিজাইন সৃষ্টি কৰকএখন শাটাৰত ট্ৰিম আৰু গ্ৰুভ-শৈলীৰ ডিজাইন সৃষ্টি কৰিবলৈ অঁকা এটা অঞ্চল Extrude ৰে আগলৈ টানক বা কাট গভীৰতাৰে ভিতৰলৈ সোমাই দিয়ক।
- কেবিনেটৰ এণ্ড পেনেল মজিয়া বা চিলিঙলৈ বঢ়াওককেবিনেটৰ End Panel শাখাৰ পৰা যোগ কৰা এণ্ড পেনেল Width Extension মান ব্যৱহাৰ কৰি তললৈ মজিয়ালৈ বা ওপৰলৈ নিজৰ পেনেলৰ পৰা বঢ়াওক।
- R handle ৰ সহায়ত এখন পেনেলৰ কাষ বঢ়াওকR handle ৰ সহায়ত এখন পেনেল 100 mm ৰ দৰে নিৰ্দিষ্ট পৰিমাণে বঢ়াওক।
- স্কাৰ্টিঙৰ ফাঁক ঢাকিবলৈ তলৰ পেনেলখন বঢ়াই দিয়কSelect the panel and extend it to cover the gap where a separate skirting would otherwise break.
- সঠিক দূৰত্বৰ বাবে টানি নিয়াৰ পৰিৱৰ্তে move tool (MV) ব্যৱহাৰ কৰকটানি নিয়াৰ পৰিৱৰ্তে move tool ব্যৱহাৰ কৰি কোনো বস্তু সঠিক দূৰত্বলৈ স্থানান্তৰ কৰক।
- Copy and paste elements between flats with Ctrl+C and Ctrl+VReuse an element such as a chimney duct in a second flat without re-importing and re-aligning it.
- Edit panel design ব্যৱহাৰ কৰি এটা কোণীয়া ওপৰৰ সৈতে মিলাবলৈ এটা কাষৰ পেনেল কাটি চুটি কৰকEdit panel design বা Edit shape ব্যৱহাৰ কৰি এটা কাষৰ পেনেল এনেদৰে সমন্বয় কৰক যাতে ই কাষ্টম কোণীয়া ওপৰ পেনেলৰ কোণৰ সৈতে মিলে।
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Ctrl+C আৰু Ctrl+V ৰ সহায়ত উপাদানসমূহ কপি আৰু পেষ্ট কৰকCtrl+C আৰু Ctrl+V চৰ্টকাটৰ সহায়ত উপাদানসমূহ কপি আৰু পেষ্ট কৰক, তাৰপিছত বেৰত দুৱাৰ আৰু খিৰিকী স্থাপন কৰক।
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Furnish আৰু move tool ৰ জৰিয়তে লফ্ট ইউনিট স্থাপন কৰক আৰু স্থানান্তৰ কৰকKitchen Furniture ৰ পৰা লফ্ট ইউনিট স্থাপন কৰক, এৰ' অপচন বা move tool ৰে স্থানান্তৰ কৰক, আৰু প্ৰয়োজন অনুসৰি বক্স লফ্ট যোগ কৰক বা আকাৰ পৰিৱৰ্তন কৰক।
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
আৰু গাইড 5
সকলো দেখুৱাওক (5)
- উৎপাদন আৰু মূল্য নিৰ্ধাৰণত প্ৰভাৱ পেলোৱা নিৰ্মাণ বিকল্পসমূহ সলনি কৰককাৰ্কাছ পেনেলসমূহ কেনেকৈ বিস্তৃত হয়, সংযোগ হয় আৰু ৰেল হয় তাক সমন্বয় কৰক, যাতে construction টেবৰ পৰিৱৰ্তনসমূহ উৎপাদন আউটপুট আৰু মূল্য নিৰ্ধাৰণলৈকে কাৰ্যকৰী হয়।
- Copy এ এটা কপি কৰে; multiply এ পুনৰাবৃত্তি কৰি কপি কৰেcopy টুলৰ copy আৰু multiply বিকল্পসমূহ কেনেকৈ পৃথক, সেয়া জানি লওক, যাতে আপুনি এটা আকৃতি এবাৰ নকল কৰিব পাৰে বা নিয়মিত ব্যৱধানত পুনৰাবৃত্তি কৰিব পাৰে।
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.