നീക്കുക, പകർത്തുക, മിറർ ചെയ്യുക, അറേ ചെയ്യുക
ഗൈഡുകൾ: 28
- ഒരു പാനൽ ലക്ഷ്യ ആഴത്തിലേക്കോ പിൻഭാഗത്തേക്കോ നീട്ടുകലക്ഷ്യ മൊത്ത ആഴത്തിൽ എത്താൻ ശരിയായ എക്സ്റ്റൻഷൻ അളവ് നൽകുക, അല്ലെങ്കിൽ ഒരു പാനൽ കാബിനറ്റിന്റെ പിൻഭാഗം വരെ നീട്ടുക.
- സമാനമായ കാബിനറ്റുകൾ വേഗത്തിൽ സൃഷ്ടിക്കാൻ ഒരു കാബിനറ്റ് പകർത്തി ഒട്ടിക്കുകആദ്യം ഒരു കാബിനറ്റ് പൂർണ്ണമായി ക്രമീകരിക്കുക, തുടർന്ന് അത് പകർത്തി ഒട്ടിച്ച് ഓരോന്നും വെവ്വേറെ ക്രമീകരിക്കുന്നതിനേക്കാൾ വേഗത്തിൽ ഒന്നിലധികം സമാനമായ കാബിനറ്റുകൾ സൃഷ്ടിക്കുക.
- സ്കർട്ടിംഗിന് പകരം ഒരു പാനൽ തറ വരെ നീട്ടുകഒരു പാനലിന്റെ construction ക്രമീകരണങ്ങളിലെ extension പാരാമീറ്ററുകൾ ഉപയോഗിച്ച്, സ്കർട്ടിംഗ് കാണിക്കുന്നതിന് പകരം അത് തറ വരെ തുടരാൻ ചെയ്യുക.
- construction ടാബ് ഉപയോഗിച്ച് ഒരു പാനൽ നീട്ടുകconstruction ടാബിൽ ഒരു extension മൂല്യം നൽകി ഒരു പാനൽ അതിന്റെ ഇടത്, വലത്, മുൻവശം അല്ലെങ്കിൽ പിൻവശം നീട്ടുക.
- എക്സ്റ്റൻഷൻ പാരാമീറ്ററുകൾ ഉപയോഗിച്ച് ഒരു പാനൽ അരിക് നീട്ടുകയോ കുറയ്ക്കുകയോ ചെയ്യുകനാല് ദിശാ എക്സ്റ്റൻഷൻ ഫീൽഡുകൾ ഉപയോഗിച്ച് ഒരു പാനൽ അരിക് നീട്ടുകയോ ചുരുക്കുകയോ ചെയ്യാം; നെഗറ്റീവ് മൂല്യങ്ങൾ ഉൾപ്പെടെ.
- Construction ലെവലിൽ ബാക്ക് പാനൽ നീട്ടുകബാക്ക് പാനൽ നീട്ടാൻ Construction ലെവലിലേക്ക് പോകുക.
- പാതയും പ്രൊഫൈലും ഉപയോഗിച്ച് സ്വീപ്പ് ചെയ്ത് പാറ്റേൺ ട്രിം നിർമ്മിക്കുകട്രിം രൂപരേഖ ഒരു പാതയായി വരയ്ക്കുക, തുടർന്ന് പാറ്റേൺ ട്രിം അല്ലെങ്കിൽ മോൾഡിംഗ് നിർമ്മിക്കാൻ അതിനൊപ്പം ഒരു പ്രൊഫൈൽ രൂപം സ്വീപ്പ് ചെയ്യുക.
- Extrude ഉം Cut ഉം ഉപയോഗിച്ച് ഷട്ടറിൽ ട്രിം, ഗ്രൂവ് ഡിസൈനുകൾ സൃഷ്ടിക്കുകവരച്ച ഒരു പ്രദേശം Extrude ഉപയോഗിച്ച് മുന്നോട്ട് വലിച്ചെടുക്കുകയോ ഒരു കട്ട് ഡെപ്ത്ത് കൊണ്ട് അകത്തേക്ക് താഴ്ത്തുകയോ ചെയ്ത് ഷട്ടറിൽ ട്രിം, ഗ്രൂവ് ശൈലിയിലുള്ള ഡിസൈനുകൾ നിർമ്മിക്കാം.
- ഒരു കാബിനറ്റിന്റെ എൻഡ് പാനൽ തറയിലേക്കോ സീലിംഗിലേക്കോ നീട്ടുകഒരു കാബിനറ്റിന്റെ End Panel വിഭാഗത്തിൽ നിന്ന് ചേർത്ത എൻഡ് പാനൽ, Width Extension മൂല്യങ്ങൾ ഉപയോഗിച്ച് താഴേക്ക് തറയിലേക്കോ അതിന്റെ സ്വന്തം പാനലിൽ നിന്ന് മുകളിലേക്കോ നീട്ടുക.
- R ഹാൻഡിൽ ഉപയോഗിച്ച് ഒരു പാനലിന്റെ വശം നീട്ടുകR ഹാൻഡിൽ ഉപയോഗിച്ച് 100 mm പോലുള്ള ഒരു നിർദ്ദിഷ്ട അളവിൽ ഒരു പാനൽ നീട്ടുക.
- സ്കർട്ടിംഗ് മുറിയുന്ന ഇടവേള മൂടാൻ താഴത്തെ പാനൽ നീട്ടുകSelect the panel and extend it to cover the gap where a separate skirting would otherwise break.
- കൃത്യമായ ദൂരത്തിന് വലിച്ചിടുന്നതിന് പകരം move tool (MV) ഉപയോഗിക്കുകവലിച്ചിടുന്നതിന് പകരം move tool ഉപയോഗിച്ച് ഒരു ഒബ്ജക്റ്റ് കൃത്യമായ ദൂരത്തിലേക്ക് നീക്കുക.
- Ctrl+C ഉം Ctrl+V ഉം ഉപയോഗിച്ച് ഫ്ലാറ്റുകൾക്കിടയിൽ ഘടകങ്ങൾ പകർത്തി ഒട്ടിക്കുകചിമ്മിനി ഡക്ട് പോലുള്ള ഒരു ഘടകം വീണ്ടും ഇംപോർട്ട് ചെയ്യാതെയും വീണ്ടും അലൈൻ ചെയ്യാതെയും രണ്ടാമത്തെ ഫ്ലാറ്റിൽ വീണ്ടും ഉപയോഗിക്കുക.
- Trim a side panel to match an angled top using Edit panel designAdjust a side panel so it matches the angle of a custom angled top panel using Edit panel design or Edit shape.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Ctrl+C, Ctrl+V എന്നിവ ഉപയോഗിച്ച് ഘടകങ്ങൾ പകർത്തി ഒട്ടിക്കുകCtrl+C, Ctrl+V കീബോർഡ് ഷോർട്ട്കട്ടുകൾ ഉപയോഗിച്ച് ഘടകങ്ങൾ പകർത്തി ഒട്ടിക്കുക, തുടർന്ന് വാതിലുകളും ജനലുകളും ഒരു ചുമരിൽ സ്ഥാപിക്കുക.
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Furnish-ലും move tool-ഉം ഉപയോഗിച്ച് ലോഫ്റ്റ് യൂണിറ്റുകൾ സ്ഥാപിക്കുകയും നീക്കുകയും ചെയ്യുകKitchen Furniture-ൽ നിന്ന് ലോഫ്റ്റ് യൂണിറ്റുകൾ സ്ഥാപിക്കുക, arrow options അല്ലെങ്കിൽ move tool ഉപയോഗിച്ച് അവ നീക്കുക, ആവശ്യാനുസരണം ബോക്സ് ലോഫ്റ്റുകൾ ചേർക്കുകയോ വലുപ്പം മാറ്റുകയോ ചെയ്യുക.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
കൂടുതൽ ഗൈഡുകൾ 5
എല്ലാം കാണിക്കുക (5)
- ഉത്പാദനത്തെയും വിലനിർണ്ണയത്തെയും ബാധിക്കുന്ന construction ഓപ്ഷനുകൾ മാറ്റുകcarcass പാനലുകൾ എങ്ങനെ നീളുന്നു, ചേരുന്നു, rail ചെയ്യുന്നു എന്ന് ക്രമീകരിക്കുക, അതുവഴി construction ടാബിലെ മാറ്റങ്ങൾ ഉത്പാദന ഔട്ട്പുട്ടുകളിലേക്കും വിലനിർണ്ണയത്തിലേക്കും പ്രാബല്യത്തിൽ വരും.
- Copy ഒരു പകർപ്പ് മാത്രം ഉണ്ടാക്കുന്നു; multiply ആവർത്തിച്ചുള്ള പകർപ്പുകൾ ഉണ്ടാക്കുന്നുഒരു ഷേപ്പ് ഒരിക്കൽ മാത്രം പകർത്താനും നിശ്ചിത ഇടവേളയിൽ ആവർത്തിക്കാനും കഴിയാൻ, copy ടൂളിലെ copy, multiply ഓപ്ഷനുകൾ തമ്മിലുള്ള വ്യത്യാസം അറിയുക.
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.