ખસેડો, કોપી કરો, મિરર કરો અને એરે
માર્ગદર્શિકાઓ: 28
- પેનલને લક્ષ્ય ઊંડાઈ સુધી અથવા પાછળ સુધી લંબાવોલક્ષ્ય સમગ્ર ઊંડાઈ સુધી પહોંચવા માટે યોગ્ય એક્સ્ટેન્શન રકમ દાખલ કરો અથવા પેનલને કેબિનેટની પાછળ સુધી લંબાવો.
- Copy and paste a cabinet to create similar cabinets quicklyFully adjust one cabinet first, then copy and paste it to create multiple similar cabinets faster than adjusting each one individually.
- સ્કર્ટિંગને બદલે પેનલને ફ્લોર સુધી લંબાવોપેનલની construction સેટિંગ્સમાં extension પેરામીટર્સનો ઉપયોગ કરીને, સ્કર્ટિંગ દેખાય તેને બદલે પેનલને ફ્લોર સુધી ચાલુ રાખો.
- construction ટૅબ વડે પેનલ લંબાવોconstruction ટૅબમાં extension મૂલ્ય દાખલ કરીને પેનલને તેની ડાબી, જમણી, આગળ કે પાછળની બાજુએ વધારો.
- એક્સ્ટેન્શન પેરામીટર વડે પેનલની ધાર લંબાવો કે ટૂંકાવોપેનલની ધાર લંબાવવા કે ટૂંકાવવા માટે ચાર દિશાત્મક એક્સ્ટેન્શન ફીલ્ડ વાપરો, જેમાં ઋણ મૂલ્યોનો પણ સમાવેશ થાય છે.
- Construction સ્તર પર બેક પેનલ લંબાવોબેક પેનલ લંબાવવા માટે Construction સ્તર પર જાઓ.
- પાથ અને પ્રોફાઇલ સાથે sweep વાપરીને પેટર્નવાળી ટ્રિમ બનાવોટ્રિમની રૂપરેખા પાથ તરીકે દોરો, પછી પેટર્નવાળી ટ્રિમ કે મોલ્ડિંગ બનાવવા માટે તેની સાથે પ્રોફાઇલ આકાર sweep કરો.
- Extrude અને Cut વડે શટર પર ટ્રિમ અને ગ્રૂવ ડિઝાઇન બનાવોશટર પર ટ્રિમ અને ગ્રૂવ-શૈલીની ડિઝાઇન બનાવવા માટે દોરેલા પ્રદેશને Extrude વડે આગળ ખેંચો અથવા કટ ડેપ્થ વડે અંદર દબાવો.
- કેબિનેટના એન્ડ પેનલને ફ્લોર કે સીલિંગ સુધી લંબાવોકેબિનેટના End Panel વિભાગમાંથી ઉમેરેલા એન્ડ પેનલને Width Extension મૂલ્યો વડે નીચે ફ્લોર સુધી કે તેના પોતાના પેનલથી ઉપર તરફ લંબાવો.
- R હેન્ડલ વડે પેનલની બાજુ લંબાવોR હેન્ડલ વડે પેનલને નિર્દિષ્ટ માત્રામાં, જેમ કે 100 mm, લંબાવો.
- નીચેની પેનલને લંબાવો જેથી સ્કર્ટિંગ તૂટે ત્યાંની ખાલી જગ્યા ઢંકાયપેનલ પસંદ કરો અને તેને લંબાવો જેથી જ્યાં અલગ સ્કર્ટિંગ તૂટે ત્યાંની ખાલી જગ્યા ઢંકાય.
- ચોક્કસ અંતર માટે ખેંચવાને બદલે move tool (MV) નો ઉપયોગ કરોઑબ્જેક્ટને ખેંચવાને બદલે move tool નો ઉપયોગ કરીને ચોક્કસ અંતર સુધી ખસેડો.
- Ctrl+C અને Ctrl+V વડે ફ્લેટો વચ્ચે એલિમેન્ટ્સ કૉપી અને પેસ્ટ કરોચિમની ડક્ટ જેવા એલિમેન્ટને ફરીથી ઇમ્પોર્ટ અને એલાઇન કર્યા વિના બીજા ફ્લેટમાં ફરી વાપરો.
- Edit panel design નો ઉપયોગ કરીને કોણાકાર ટોપ સાથે મેળ ખાય તે માટે સાઇડ પેનલને ટ્રિમ કરોEdit panel design અથવા Edit shape નો ઉપયોગ કરીને કસ્ટમ કોણાકાર ટોપ પેનલના કોણ સાથે મેળ ખાય તે માટે સાઇડ પેનલને સમાયોજિત કરો.
- Copy and paste a unit with Ctrl+C and Ctrl+VCopy a unit and paste as many copies as you need, with the quotation/costing line generated automatically for each copy.
- Ctrl+C અને Ctrl+V વડે ઘટકોની નકલ કરો અને પેસ્ટ કરોCtrl+C અને Ctrl+V શોર્ટકટ વડે ઘટકોની નકલ કરો અને પેસ્ટ કરો, પછી દીવાલ પર દરવાજા અને બારીઓ મૂકો.
- Copy-paste places repeated copies until Escape is pressedDuplicate a placed unit with Ctrl+C and Ctrl+V, then keep clicking to place as many identical copies as you need.
- Extend a wardrobe beyond 900 mmRemove the width cap so a wardrobe or cabinet can be widened past a fixed limit such as 900 mm.
- Find the Rotate tool and what it doesLocate the Rotate control and use it to turn an object around an axis.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Furnish અને move tool દ્વારા લોફ્ટ યુનિટ મૂકો અને ખસેડોKitchen Furniture માંથી લોફ્ટ યુનિટ મૂકો, તેમને arrow વિકલ્પો અથવા move tool થી ખસેડો, અને જરૂર મુજબ બોક્સ લોફ્ટ ઉમેરો કે તેમનું માપ બદલો.
- Place units by dragging or with the move toolPlace a unit in front of the carcass by dragging it or by using the move (MV) tool once the carcass dimensions are correct.
- Set carcass panel thickness and extend fillers to match itMatch your fillers to the 18 mm carcass panel thickness so they line up flush with the carcass.
વધુ માર્ગદર્શિકાઓ 5
બધું બતાવો (5)
- Change construction options that affect production and pricingAdjust how carcass panels extend, connect and rail so the construction tab changes carry through to production outputs and pricing.
- Copy એક નકલ બનાવે છે; multiply વારંવાર નકલો બનાવે છેશીખો કે copy ટૂલના copy અને multiply વિકલ્પો કેવી રીતે અલગ પડે છે, જેથી તમે આકારની એક નકલ બનાવી શકો અથવા નિયમિત અંતરાલે તેને પુનરાવર્તિત કરી શકો.
- Copy objects with the multiply optionPlace a fixed number of copies of an object using the multiply option of the copy tool.
- Repeat profiles with automatic parameter calculationUse the repeater tool in Edit Panel Design to copy and array profiles while the spacing and end point parameters update automatically with the panel size.
- Round shape corners using the fillet radius optionCurve a corner of a drawn shape by setting the Fillet Tool's edge length reduction and applying it to two adjoining edges.