2D 도면 도구
가이드: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- 타일링 내에서 선 도구로 개방된 경계를 완성하세요타일링 기능 내에서 선 도구로 누락된 모서리를 그려 개방된 초안 영역을 닫으면 타일링이 성공할 수 있습니다.
- 스케처에서 3-point arc 버튼으로 호를 그립니다호의 시작점, 끝점, 호가 지나는 점을 차례로 클릭하여 호를 그리고, 세 개의 선을 하나의 곡선 모서리를 가진 도형으로 닫습니다.
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- XL로 구성선을 그리고 CP로 거리에 맞춰 복사하세요XL로 구성선을 그리고 CP로 입력한 거리에 선을 복사하면 수동으로 측정할 필요가 없습니다.
- 직사각형, 선 또는 3점 호를 사용하여 스트립 조명 추가Insert > Strip light에서 스트립 조명을 추가하고 직사각형, 선 또는 3점 호로 그린 다음 강도와 색상을 설정하세요.
- edit panel design과 offset rectangle을 사용하여 패널에 컷을 생성하기패널 윤곽을 그대로 유지한 채 컷 모양을 그리고 offset rectangle로 가장자리를 이동하여 패널을 컷합니다.
- 2D 사각형과 돌출로 반자 천장 만들기2D 사각형과 돌출로 반자 천장을 만든 다음, 조명 유형을 개별적으로 추가하고 조정하세요.
- 천장 타일 패턴 재질과 줄눈선 색상 변경타일을 천장 패턴 재질로 적용한 다음 줄눈선의 색상을 변경하세요.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Arc Drawing 모드로 곡선 벽 그리기Draw by Bending, Draw around Center 또는 Draw along Tangent를 사용하여 곡선 벽을 그리고, 벽의 왼쪽 패널에서 반지름을 조정하세요.
- 3D에서 타일링 모양을 편집하여 정렬과 불필요한 선 수정3D에서 타일링 정렬을 조정하고 불필요한 외곽선을 정리하여 타일링이 원하는 모양을 따르도록 합니다.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
다른 가이드 4
모두 보기 (4)
- 간격과 기준점, 시작점 및 끝점을 사용한 반복 사용필요한 간격과 점을 지정하여 repeat 명령을 실행해 선을 따라 반복 패턴을 만듭니다. 필요할 경우 시작점을 피처에서 오프셋하고, 패널을 그리기 전에 구성 선으로 기준 간격을 표시합니다.
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.