Alat gambar 2D
Panduan: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- Lengkapi batas terbuka dengan line tool di dalam tilingTutup area yang telah digambar yang masih terbuka dengan menggambar sisi yang hilang menggunakan line tool di dalam fungsi tiling agar tiling dapat berhasil.
- Gambar busur dengan tombol busur 3 titik di sketcherGambar busur dengan mengklik titik awal, titik akhir, lalu titik yang dilaluinya, dan tutup tiga garis menjadi bentuk dengan satu sisi melengkung.
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- Gunakan XL untuk garis konstruksi dan CP untuk menyalin pada jarak tertentuGambar garis konstruksi dengan XL dan salin garis pada jarak yang diketik dengan CP sehingga Anda tidak perlu mengukur secara manual.
- Tambahkan lampu strip menggunakan persegi panjang, garis, atau busur tiga titikTambahkan lampu strip dari Insert > Strip light dan gambar sebagai persegi panjang, garis, atau busur tiga titik, lalu atur intensitas dan warnanya.
- Buat potongan pada panel menggunakan edit panel design dan offset rectanglePotong panel dengan menggambar bentuk potongan dan menggeser tepinya dengan offset rectangle sambil menjaga garis luar panel tetap utuh.
- Build false ceilings from 2D rectangles and extrusionsCreate a false ceiling from 2D rectangles and extrusions, then add and adjust lighting types individually.
- Ubah material pola ubin plafon dan warna garis natTerapkan ubin sebagai material pola plafon, lalu ubah warna garis natnya.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Gambar dinding melengkung dengan mode Arc DrawingGambar dinding melengkung menggunakan Draw by Bending, Draw around Center, atau Draw along Tangent, lalu sesuaikan radius dari panel kiri dinding.
- Edit bentuk tiling di 3D untuk memperbaiki perataan dan garis yang tidak diinginkanSesuaikan perataan tiling di 3D dan rapikan garis luar yang tidak diinginkan agar tiling mengikuti bentuk yang Anda inginkan.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
Panduan lainnya 4
Tampilkan semua (4)
- Gunakan repeat dengan spasi dan titik base, start, serta endBuat pola berulang di sepanjang garis dengan menjalankan perintah repeat dengan spasi dan titik yang diperlukan, menggeser titik start dari fitur bila perlu, dan menandai celah referensi dengan construction line sebelum menggambar panel.
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.