2D ଚିତ୍ର ଉପକରଣ
ଗାଇଡ୍: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- ଟାଇଲିଂ ଭିତରେ ଲାଇନ୍ ଟୁଲ୍ ସହିତ ଏକ ଖୋଲା-ମୁଣ୍ଡ ବାଉଣ୍ଡାରୀ ସମ୍ପୂର୍ଣ୍ଣ କରନ୍ତୁଟାଇଲିଂ ସଫଳ ହେବା ପାଇଁ ଟାଇଲିଂ ଫଙ୍କସନ୍ ଭିତରେ ଲାଇନ୍ ଟୁଲ୍ ସହିତ ଏହାର ଅନୁପସ୍ଥିତ ଧାର ଆଙ୍କି ଏକ ଖୋଲା-ମୁଣ୍ଡ ଡ୍ରାଫ୍ଟ ହୋଇଥିବା କ୍ଷେତ୍ର ବନ୍ଦ କରନ୍ତୁ।
- ସ୍କେଚରରେ 3-point arc ବଟନ ସହିତ ଏକ ଚାପ ଆଙ୍କନ କରନ୍ତୁଏହାର ଆରମ୍ଭ, ଏହାର ଶେଷ, ତାପରେ ଏହା ଯେଉଁ ବିନ୍ଦୁ ଦେଇ ଯାଏ ସେଠାରେ କ୍ଲିକ କରି ଏକ ଚାପ ଆଙ୍କନ କରନ୍ତୁ, ଏବଂ ତିନୋଟି ରେଖାକୁ ଏକ ବକ୍ର ଧାର ଥିବା ଆକୃତିରେ ବନ୍ଦ କରନ୍ତୁ।
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- ନିର୍ମାଣ ରେଖା ପାଇଁ XL ଏବଂ ଦୂରତାରେ କପି କରିବା ପାଇଁ CP ବ୍ୟବହାର କରନ୍ତୁXL ସହିତ ନିର୍ମାଣ ରେଖା ଆଙ୍କନ୍ତୁ ଏବଂ CP ସହିତ ଟାଇପ୍ କରାଯାଇଥିବା ଦୂରତାରେ ଏକ ରେଖା କପି କରନ୍ତୁ, ଯାହାଫଳରେ ଆପଣଙ୍କୁ ମାନୁଆଲୀ ମାପ ନେବାକୁ ପଡ଼ିବ ନାହିଁ।
- ଆୟତକ୍ଷେତ୍ର, ରେଖା କିମ୍ବା ତିନି-ବିନ୍ଦୁ ଚାପ ବ୍ୟବହାର କରି ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁInsert > Strip light ରୁ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁ ଏବଂ ସେଗୁଡ଼ିକୁ ଆୟତକ୍ଷେତ୍ର, ରେଖା କିମ୍ବା ତିନି-ବିନ୍ଦୁ ଚାପ ଭାବରେ ଆଙ୍କନ୍ତୁ, ତାପରେ ସେଗୁଡ଼ିକର ତୀବ୍ରତା ଓ ରଙ୍ଗ ସେଟ୍ କରନ୍ତୁ।
- ପ୍ୟାନେଲ ଡିଜାଇନ ଏଡିଟ ଏବଂ ଅଫସେଟ ରେକ୍ଟାଙ୍ଗଲ ବ୍ୟବହାର କରି ପ୍ୟାନେଲରେ ଏକ କଟ ତିଆରି କରନ୍ତୁପ୍ୟାନେଲର ଆଉଟଲାଇନ ଅକ୍ଷୁଣ୍ଣ ରଖି କଟ ଆକୃତି ଆଙ୍କି ଏବଂ ଅଫସେଟ ରେକ୍ଟାଙ୍ଗଲ ସହିତ ଏହାର ଧାରକୁ ଘୁଞ୍ଚାଇ ଏକ ପ୍ୟାନେଲ କାଟନ୍ତୁ।
- 2D ଆୟତକ୍ଷେତ୍ର ଏବଂ ଏକ୍ସଟ୍ରୁଜନ୍ରୁ ଫଲ୍ସ ସିଲିଂ ତିଆରି କରନ୍ତୁ2D ଆୟତକ୍ଷେତ୍ର ଏବଂ ଏକ୍ସଟ୍ରୁଜନ୍ରୁ ଏକ ଫଲ୍ସ ସିଲିଂ ତିଆରି କରନ୍ତୁ, ତାପରେ ଆଲୋକ ପ୍ରକାରଗୁଡ଼ିକୁ ଅଲଗା ଅଲଗା ଭାବରେ ଯୋଡ଼ନ୍ତୁ ଏବଂ ସମାୟୋଜିତ କରନ୍ତୁ।
- ଛାତ ଟାଇଲ ପ୍ୟାଟର୍ନ ସାମଗ୍ରୀ ଏବଂ ଗ୍ରାଉଟିଂ ଲାଇନ ରଙ୍ଗ ପରିବର୍ତ୍ତନ କରନ୍ତୁଛାତ ପ୍ୟାଟର୍ନ ସାମଗ୍ରୀ ଭାବରେ ଏକ ଟାଇଲ ଲଗାନ୍ତୁ ଏବଂ ତାପରେ ଏହାର ଗ୍ରାଉଟିଂ ଲାଇନର ରଙ୍ଗ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Arc Drawing ମୋଡ୍ ସହିତ ବକ୍ର କାନ୍ଥ ଆଙ୍କନ କରନ୍ତୁDraw by Bending, Draw around Center କିମ୍ବା Draw along Tangent ବ୍ୟବହାର କରି ବକ୍ର କାନ୍ଥ ଆଙ୍କନ କରନ୍ତୁ ଏବଂ କାନ୍ଥର ବାମ ପ୍ୟାନେଲରୁ ରେଡିଅସ୍ ସମାୟୋଜିତ କରନ୍ତୁ।
- ସଜଡ଼ାଇ ଏବଂ ଅନାବଶ୍ୟକ ରେଖା ସଠିକ୍ କରିବା ପାଇଁ 3D ରେ ଟାଇଲିଂ ଆକୃତି ସମ୍ପାଦନ କରନ୍ତୁ3D ରେ ଟାଇଲିଂ ସଜଡ଼ାଇ ସମାୟୋଜନ କରନ୍ତୁ ଏବଂ ଅନାବଶ୍ୟକ ଆଉଟଲାଇନ୍ ରେଖା ସଫା କରନ୍ତୁ, ଯାହାଫଳରେ ଟାଇଲିଂ ଆପଣ ଚାହୁଁଥିବା ଆକୃତିକୁ ଅନୁସରଣ କରିବ।
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
ଅଧିକ ଗାଇଡ୍ 4
ସବୁ ଦେଖାନ୍ତୁ (4)
- ସ୍ପେସିଂ ଏବଂ ବେସ୍, ଆରମ୍ଭ ଓ ଶେଷ ପଏଣ୍ଟ ସହିତ repeat ବ୍ୟବହାର କରନ୍ତୁଆବଶ୍ୟକ ସ୍ପେସିଂ ଏବଂ ପଏଣ୍ଟ ସହିତ repeat କମାଣ୍ଡ ଚଲାଇ ଏକ ରେଖା ବରାବର ପୁନରାବୃତ୍ତି ପ୍ୟାଟର୍ନ ସୃଷ୍ଟି କରନ୍ତୁ, ଆବଶ୍ୟକ ହେଲେ ଏକ ଫିଚରରୁ ଆରମ୍ଭକୁ ଅଫସେଟ୍ କରନ୍ତୁ ଏବଂ ପ୍ୟାନେଲ ଆଙ୍କିବା ପୂର୍ବରୁ construction lines ସହିତ ରେଫରେନ୍ସ ଫାଙ୍କ ଚିହ୍ନଟ କରନ୍ତୁ।
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.