2D வரைதல் கருவிகள்
வழிகாட்டிகள்: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- டைலிங்கிற்குள் line tool மூலம் திறந்த முனை கொண்ட எல்லையை முழுமையாக்கவும்வரையப்பட்ட ஒரு பகுதி திறந்த முனையுடன் இருந்தால், டைலிங் செயல்பாட்டிற்குள் line tool மூலம் அதன் விடுபட்ட விளிம்பை வரைந்து அதை மூடி, டைலிங் வெற்றிபெறச் செய்யவும்.
- ஸ்கெட்சரில் 3-point arc பொத்தானைப் பயன்படுத்தி ஒரு வளைவை வரையவும்ஒரு வளைவின் தொடக்கம், முடிவு, பின்னர் அது கடந்து செல்லும் ஒரு புள்ளி ஆகியவற்றைக் கிளிக் செய்து வளைவை வரையவும்; மூன்று கோடுகளை ஒரு வளைந்த விளிம்புடன் ஒரு வடிவமாக மூடவும்.
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- கட்டுமானக் கோடுகளுக்கு XL-ஐயும், தூரத்தில் நகலெடுக்க CP-ஐயும் பயன்படுத்தவும்XL மூலம் கட்டுமானக் கோடுகளை வரையவும், CP மூலம் தட்டச்சு செய்த தூரத்தில் கோட்டை நகலெடுக்கவும், இதனால் நீங்கள் கைமுறையாக அளவீடுகளை எடுக்க வேண்டியதில்லை.
- செவ்வகம், கோடு அல்லது மூன்று-புள்ளி வளைவைப் பயன்படுத்தி ஸ்ட்ரிப் விளக்குகளைச் சேர்க்கவும்Insert > Strip light இலிருந்து ஸ்ட்ரிப் விளக்குகளைச் சேர்த்து, அவற்றை செவ்வகமாகவோ, கோடாகவோ அல்லது மூன்று-புள்ளி வளைவாகவோ வரைந்து, பின்னர் அவற்றின் தீவிரத்தையும் நிறத்தையும் அமைக்கவும்.
- திருத்து பேனல் வடிவமைப்பு மற்றும் ஆஃப்செட் செவ்வகத்தைப் பயன்படுத்தி பேனலில் ஒரு வெட்டை உருவாக்கவும்பேனலின் வெளிப்புற விளிம்பை அப்படியே வைத்துக்கொண்டு, வெட்டு வடிவத்தை வரைந்து, அதன் ஓரத்தை ஆஃப்செட் செவ்வகத்தால் நகர்த்தி ஒரு பேனலை வெட்டவும்.
- 2D செவ்வகங்கள் மற்றும் எக்ஸ்ட்ரூஷன்களில் இருந்து பொய்யான கூரைகளை உருவாக்குங்கள்2D செவ்வகங்கள் மற்றும் எக்ஸ்ட்ரூஷன்களில் இருந்து பொய்யான கூரையை உருவாக்கி, பின்னர் விளக்கு வகைகளை தனித்தனியாகச் சேர்த்து சரிசெய்யுங்கள்.
- உச்சவரம்பு ஓடு வடிவமைப்புப் பொருள் மற்றும் கூட்டு இணைப்புக் கோட்டு நிறத்தை மாற்றவும்உச்சவரம்பு வடிவமைப்புப் பொருளாக ஒரு ஓட்டைப் பயன்படுத்தி, அதன் கூட்டு இணைப்புக் கோடுகளின் நிறத்தை மாற்றவும்.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Arc Drawing முறைகள் மூலம் வளைந்த சுவர்களை வரையவும்Draw by Bending, Draw around Center அல்லது Draw along Tangent பயன்படுத்தி வளைந்த சுவர்களை வரையவும், மேலும் சுவரின் இடது பேனலில் இருந்து ஆரத்தை சரிசெய்யவும்.
- 3D-இல் ஓடு அமைப்பு வடிவத்தைத் திருத்தி சீரமைப்பு மற்றும் தேவையற்ற கோடுகளைச் சரிசெய்யவும்3D-இல் ஓடு சீரமைப்பைச் சரிசெய்து, தேவையற்ற வெளிக்கோடுகளை அகற்றி, ஓடு அமைப்பு நீங்கள் விரும்பும் வடிவத்தைப் பின்பற்றுமாறு செய்யவும்.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
மேலும் வழிகாட்டிகள் 4
அனைத்தையும் காட்டு (4)
- இடைவெளி மற்றும் அடிப்புள்ளி, தொடக்கப் புள்ளி மற்றும் இறுதிப் புள்ளிகளுடன் repeat பயன்படுத்தவும்தேவையான இடைவெளி மற்றும் புள்ளிகளுடன் repeat கட்டளையை இயக்கி ஒரு கோட்டின் வழியே மீளும் வடிவத்தை உருவாக்கவும்; தேவைப்படும்போது தொடக்கத்தை ஒரு அம்சத்திலிருந்து அளவு மாற்றி வைத்து, பேனல்களை வரைவதற்கு முன் construction lines மூலம் குறிப்பு இடைவெளிகளைக் குறிக்கவும்.
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.