2D ഡ്രോയിംഗ് ടൂളുകൾ
ഗൈഡുകൾ: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- ടൈലിംഗിനുള്ളിൽ ലൈൻ ടൂൾ ഉപയോഗിച്ച് തുറന്ന അറ്റമുള്ള ഒരു അതിർത്തി പൂർത്തിയാക്കുകടൈലിംഗ് വിജയിക്കാൻ, ടൈലിംഗ് ഫംഗ്ഷനുള്ളിൽ ലൈൻ ടൂൾ ഉപയോഗിച്ച് കാണാത്ത അറ്റം വരച്ച് തുറന്ന അറ്റമുള്ള ഡ്രാഫ്റ്റ് ചെയ്ത ഏരിയ അടയ്ക്കുക.
- സ്കെച്ചറിലെ 3-point arc ബട്ടൺ ഉപയോഗിച്ച് ഒരു ആർക്ക് വരയ്ക്കുകഒരു ആർക്കിന്റെ ആരംഭം, അതിന്റെ അവസാനം, എന്നിട്ട് അത് കടന്നുപോകുന്ന ഒരു പോയിന്റ് എന്നിവ ക്ലിക്ക് ചെയ്ത് ഒരു ആർക്ക് വരയ്ക്കുക, കൂടാതെ മൂന്ന് വരികൾ ഒരു വളഞ്ഞ അറ്റമുള്ള ഒരു ആകൃതിയായി അടയ്ക്കുക.
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- നിർമ്മാണ രേഖകൾക്ക് XL ഉം ഒരു ദൂരത്തിൽ പകർത്താൻ CP ഉം ഉപയോഗിക്കുകXL ഉപയോഗിച്ച് നിർമ്മാണ രേഖകൾ വരയ്ക്കുക, കൂടാതെ CP ഉപയോഗിച്ച് ടൈപ്പ് ചെയ്ത ദൂരത്തിൽ ഒരു രേഖ പകർത്തുക, അതിനാൽ നിങ്ങൾ സ്വയം അളവുകൾ എടുക്കേണ്ടതില്ല.
- Add strip lights using rectangle, line or three-point arcAdd strip lights from Insert > Strip light and draw them as a rectangle, a line or a three-point arc, then set their intensity and colour.
- എഡിറ്റ് പാനൽ ഡിസൈൻ ഉപയോഗിച്ച് ഒരു പാനലിൽ ഒരു കട്ട് ഉണ്ടാക്കി ഓഫ്സെറ്റ് ദീർഘചതുരം ഉപയോഗിക്കുകപാനലിന്റെ രൂപരേഖ അതേപടി നിലനിർത്തിക്കൊണ്ട്, കട്ട് ചെയ്യേണ്ട ആകൃതി വരച്ച് അതിന്റെ അരിക് ഓഫ്സെറ്റ് ദീർഘചതുരം ഉപയോഗിച്ച് നീക്കി ഒരു പാനൽ മുറിക്കുക.
- 2D ദീർഘചതുരങ്ങളിൽ നിന്നും എക്സ്ട്രൂഷനുകളിൽ നിന്നും തെറ്റായ സീലിംഗുകൾ നിർമ്മിക്കുക2D ദീർഘചതുരങ്ങളിൽ നിന്നും എക്സ്ട്രൂഷനുകളിൽ നിന്നും തെറ്റായ സീലിംഗ് സൃഷ്ടിച്ച്, ലൈറ്റിംഗ് തരങ്ങൾ വ്യക്തിഗതമായി ചേർത്ത് ക്രമീകരിക്കുക.
- സീലിംഗ് ടൈൽ പാറ്റേൺ മെറ്റീരിയലും ഗ്രൗട്ടിംഗ് ലൈൻ നിറവും മാറ്റുകസീലിംഗ് പാറ്റേൺ മെറ്റീരിയലായി ഒരു ടൈൽ പ്രയോഗിക്കുക, തുടർന്ന് അതിന്റെ ഗ്രൗട്ടിംഗ് ലൈനുകളുടെ നിറം മാറ്റുക.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Arc Drawing മോഡുകൾ ഉപയോഗിച്ച് വളഞ്ഞ ഭിത്തികൾ വരയ്ക്കുകDraw by Bending, Draw around Center അല്ലെങ്കിൽ Draw along Tangent ഉപയോഗിച്ച് വളഞ്ഞ ഭിത്തികൾ വരയ്ക്കുക, ഭിത്തിയുടെ ഇടത് പാനലിൽ നിന്ന് ആരം ക്രമീകരിക്കുക.
- അലൈൻമെന്റും അനാവശ്യ ലൈനുകളും ശരിയാക്കാൻ 3D-യിൽ ടൈലിംഗ് രൂപം എഡിറ്റ് ചെയ്യുക3D-യിൽ ടൈലിംഗ് അലൈൻമെന്റ് ക്രമീകരിച്ച്, അനാവശ്യ ഔട്ട്ലൈൻ ലൈനുകൾ നീക്കം ചെയ്ത്, ടൈലിംഗ് നിങ്ങൾക്ക് വേണ്ട രൂപത്തെ പിന്തുടരാൻ അനുവദിക്കുക.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
കൂടുതൽ ഗൈഡുകൾ 4
എല്ലാം കാണിക്കുക (4)
- ഇടവേളയും അടിസ്ഥാന, ആരംഭ, അന്ത്യ ബിന്ദുക്കളും ഉപയോഗിച്ച് repeat ഉപയോഗിക്കുകആവശ്യമായ ഇടവേളയും ബിന്ദുക്കളും നൽകി repeat കമാൻഡ് പ്രവർത്തിപ്പിച്ച് ഒരു രേഖയിലൂടെ ആവർത്തിച്ചുള്ള പാറ്റേൺ സൃഷ്ടിക്കുക; ആവശ്യമെങ്കിൽ ഒരു ഫീച്ചറിൽ നിന്ന് ആരംഭം ഓഫ്സെറ്റ് ചെയ്യുകയും പാനലുകൾ വരയ്ക്കുന്നതിന് മുൻപ് construction lines ഉപയോഗിച്ച് റഫറൻസ് വിടവുകൾ അടയാളപ്പെടുത്തുകയും ചെയ്യുക.
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.