2D रेखाटन साधने
मार्गदर्शक: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- टाइलिंगमध्ये लाइन टूल वापरून मोकळ्या टोकाची सीमा पूर्ण कराटाइलिंग यशस्वी होण्यासाठी, टाइलिंग फंक्शनमध्ये लाइन टूल वापरून त्याची गहाळ किनार काढून मोकळ्या टोकाचा मसुदा केलेला भाग बंद करा.
- स्केचरमधील 3-point arc बटणाने कंस काढाकंसाची सुरुवात, शेवट, आणि तो ज्या बिंदूतून जातो तो बिंदू क्लिक करून कंस काढा, आणि तीन रेषा एका वक्र कडेच्या आकारात बंद करा.
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- बांधकाम रेषांसाठी XL आणि अंतरावर प्रत करण्यासाठी CP वापराXL ने बांधकाम रेषा काढा आणि CP ने टाइप केलेल्या अंतरावर रेषेची प्रत करा, जेणेकरून तुम्हाला स्वतः मोजमापे घ्यावी लागणार नाहीत.
- आयत, रेषा किंवा तीन-बिंदू कमान वापरून स्ट्रिप लाइट्स जोडाInsert > Strip light मधून स्ट्रिप लाइट्स जोडा आणि त्या आयत, रेषा किंवा तीन-बिंदू कमान म्हणून काढा, नंतर त्यांची तीव्रता आणि रंग सेट करा.
- पॅनेलमध्ये एडिट पॅनेल डिझाइन आणि ऑफसेट आयत वापरून कट तयार करापॅनेलची बाह्यरेषा अखंड ठेवून, कटाचा आकार काढून आणि ऑफसेट आयताने त्याची किनार हलवून पॅनेल कापा.
- 2D आयत आणि एक्स्ट्र्यूजनपासून खोटी कमालवंच (false ceiling) तयार करा2D आयत आणि एक्स्ट्र्यूजनपासून खोटी कमालवंच तयार करा, नंतर प्रकाशाचे प्रकार स्वतंत्रपणे जोडा आणि समायोजित करा.
- सीलिंग टाइल पॅटर्न मटेरियल आणि ग्राउटिंग लाइनचा रंग बदलासीलिंग पॅटर्न मटेरियल म्हणून टाइल लावा आणि नंतर तिच्या ग्राउटिंग लाइनचा रंग बदला.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Arc Drawing मोड्सने वक्र भिंती काढाDraw by Bending, Draw around Center किंवा Draw along Tangent वापरून वक्र भिंती काढा आणि भिंतीच्या डाव्या पॅनेलमधून त्रिज्या समायोजित करा.
- संरेखन आणि अनावश्यक रेषा दुरुस्त करण्यासाठी 3D मध्ये टायलिंग आकार संपादित करा3D मध्ये टायलिंग संरेखन समायोजित करा आणि अनावश्यक बाह्यरेषा साफ करा, जेणेकरून टायलिंग तुम्हाला हव्या असलेल्या आकाराचे अनुसरण करेल.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
आणखी मार्गदर्शक 4
सर्व दाखवा (4)
- आवश्यक अंतर आणि बेस, सुरुवात व शेवटचे बिंदू यांसह repeat वापराआवश्यक अंतर आणि बिंदूंसह repeat कमांड चालवून रेषेसोबत पुनरावृत्ती होणारा नमुना तयार करा; आवश्यक असल्यास सुरुवात एखाद्या वैशिष्ट्यापासून ऑफसेट करा आणि पॅनेल काढण्यापूर्वी संदर्भ अंतर construction lines ने चिन्हांकित करा.
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.